1 /*- 2 * Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer, 10 * without modification, immediately at the beginning of the file. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/kernel.h> 33 #include <sys/ata.h> 34 #include <sys/bus.h> 35 #include <sys/endian.h> 36 #include <sys/malloc.h> 37 #include <sys/lock.h> 38 #include <sys/mutex.h> 39 #include <sys/sema.h> 40 #include <sys/taskqueue.h> 41 #include <vm/uma.h> 42 #include <machine/stdarg.h> 43 #include <machine/resource.h> 44 #include <machine/bus.h> 45 #include <sys/rman.h> 46 #include <dev/ata/ata-all.h> 47 #include <ata_if.h> 48 49 void 50 ata_sata_phy_check_events(device_t dev, int port) 51 { 52 struct ata_channel *ch = device_get_softc(dev); 53 u_int32_t error, status; 54 55 if (ata_sata_scr_read(ch, port, ATA_SERROR, &error)) 56 return; 57 58 /* Check that SError value is sane. */ 59 if (error == 0xffffffff) 60 return; 61 62 /* Clear set error bits/interrupt. */ 63 if (error) 64 ata_sata_scr_write(ch, port, ATA_SERROR, error); 65 66 /* if we have a connection event deal with it */ 67 if ((error & ATA_SE_PHY_CHANGED) && (ch->pm_level == 0)) { 68 if (bootverbose) { 69 if (ata_sata_scr_read(ch, port, ATA_SSTATUS, &status)) { 70 device_printf(dev, "PHYRDY change\n"); 71 } else if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && 72 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && 73 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) { 74 device_printf(dev, "CONNECT requested\n"); 75 } else 76 device_printf(dev, "DISCONNECT requested\n"); 77 } 78 taskqueue_enqueue(taskqueue_thread, &ch->conntask); 79 } 80 } 81 82 int 83 ata_sata_scr_read(struct ata_channel *ch, int port, int reg, uint32_t *val) 84 { 85 86 if (ch->hw.pm_read != NULL) 87 return (ch->hw.pm_read(ch->dev, port, reg, val)); 88 if (ch->r_io[reg].res) { 89 *val = ATA_IDX_INL(ch, reg); 90 return (0); 91 } 92 return (-1); 93 } 94 95 int 96 ata_sata_scr_write(struct ata_channel *ch, int port, int reg, uint32_t val) 97 { 98 99 if (ch->hw.pm_write != NULL) 100 return (ch->hw.pm_write(ch->dev, port, reg, val)); 101 if (ch->r_io[reg].res) { 102 ATA_IDX_OUTL(ch, reg, val); 103 return (0); 104 } 105 return (-1); 106 } 107 108 static int 109 ata_sata_connect(struct ata_channel *ch, int port, int quick) 110 { 111 u_int32_t status; 112 int timeout, t; 113 114 /* wait up to 1 second for "connect well" */ 115 timeout = (quick == 2) ? 0 : 100; 116 t = 0; 117 while (1) { 118 if (ata_sata_scr_read(ch, port, ATA_SSTATUS, &status)) 119 return (0); 120 if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && 121 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && 122 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) 123 break; 124 if (++t > timeout) 125 break; 126 ata_udelay(10000); 127 } 128 if (bootverbose) { 129 if (t > timeout) { 130 if (port < 0) { 131 device_printf(ch->dev, "SATA connect timeout status=%08x\n", 132 status); 133 } else { 134 device_printf(ch->dev, "p%d: SATA connect timeout status=%08x\n", 135 port, status); 136 } 137 } else if (port < 0) { 138 device_printf(ch->dev, "SATA connect time=%dms status=%08x\n", 139 t * 10, status); 140 } else { 141 device_printf(ch->dev, "p%d: SATA connect time=%dms status=%08x\n", 142 port, t * 10, status); 143 } 144 } 145 146 /* clear SATA error register */ 147 ata_sata_scr_write(ch, port, ATA_SERROR, 0xffffffff); 148 149 return ((t > timeout) ? 0 : 1); 150 } 151 152 int 153 ata_sata_phy_reset(device_t dev, int port, int quick) 154 { 155 struct ata_channel *ch = device_get_softc(dev); 156 int loop, retry, sata_rev; 157 uint32_t val, val1; 158 159 sata_rev = ch->user[port < 0 ? 0 : port].revision; 160 if (sata_rev > 0) 161 quick = 0; 162 163 if (quick) { 164 if (ata_sata_scr_read(ch, port, ATA_SCONTROL, &val)) 165 return (0); 166 if ((val & ATA_SC_DET_MASK) == ATA_SC_DET_IDLE) { 167 ata_sata_scr_write(ch, port, ATA_SCONTROL, 168 ATA_SC_DET_IDLE | ((ch->pm_level > 0) ? 0 : 169 ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER)); 170 return ata_sata_connect(ch, port, quick); 171 } 172 } 173 174 if (bootverbose) { 175 if (port < 0) { 176 device_printf(dev, "hard reset ...\n"); 177 } else { 178 device_printf(dev, "p%d: hard reset ...\n", port); 179 } 180 } 181 if (sata_rev == 1) 182 val1 = ATA_SC_SPD_SPEED_GEN1; 183 else if (sata_rev == 2) 184 val1 = ATA_SC_SPD_SPEED_GEN2; 185 else if (sata_rev == 3) 186 val1 = ATA_SC_SPD_SPEED_GEN3; 187 else 188 val1 = 0; 189 for (retry = 0; retry < 10; retry++) { 190 for (loop = 0; loop < 10; loop++) { 191 if (ata_sata_scr_write(ch, port, ATA_SCONTROL, ATA_SC_DET_RESET | 192 val1 | ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER)) 193 goto fail; 194 ata_udelay(100); 195 if (ata_sata_scr_read(ch, port, ATA_SCONTROL, &val)) 196 goto fail; 197 if ((val & ATA_SC_DET_MASK) == ATA_SC_DET_RESET) 198 break; 199 } 200 ata_udelay(5000); 201 for (loop = 0; loop < 10; loop++) { 202 if (ata_sata_scr_write(ch, port, ATA_SCONTROL, 203 ATA_SC_DET_IDLE | val1 | ((ch->pm_level > 0) ? 0 : 204 ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER))) 205 goto fail; 206 ata_udelay(100); 207 if (ata_sata_scr_read(ch, port, ATA_SCONTROL, &val)) 208 goto fail; 209 if ((val & ATA_SC_DET_MASK) == 0) 210 return ata_sata_connect(ch, port, 0); 211 } 212 } 213 fail: 214 /* Clear SATA error register. */ 215 ata_sata_scr_write(ch, port, ATA_SERROR, 0xffffffff); 216 217 if (bootverbose) { 218 if (port < 0) { 219 device_printf(dev, "hard reset failed\n"); 220 } else { 221 device_printf(dev, "p%d: hard reset failed\n", port); 222 } 223 } 224 return (0); 225 } 226 227 int 228 ata_sata_setmode(device_t dev, int target, int mode) 229 { 230 231 return (min(mode, ATA_UDMA5)); 232 } 233 234 int 235 ata_sata_getrev(device_t dev, int target) 236 { 237 struct ata_channel *ch = device_get_softc(dev); 238 239 if (ch->r_io[ATA_SSTATUS].res) 240 return ((ATA_IDX_INL(ch, ATA_SSTATUS) & 0x0f0) >> 4); 241 return (0xff); 242 } 243 244 int 245 ata_request2fis_h2d(struct ata_request *request, u_int8_t *fis) 246 { 247 248 if (request->flags & ATA_R_ATAPI) { 249 fis[0] = 0x27; /* host to device */ 250 fis[1] = 0x80 | (request->unit & 0x0f); 251 fis[2] = ATA_PACKET_CMD; 252 if (request->flags & (ATA_R_READ | ATA_R_WRITE)) 253 fis[3] = ATA_F_DMA; 254 else { 255 fis[5] = request->transfersize; 256 fis[6] = request->transfersize >> 8; 257 } 258 fis[7] = ATA_D_LBA; 259 fis[15] = ATA_A_4BIT; 260 return 20; 261 } 262 else { 263 fis[0] = 0x27; /* host to device */ 264 fis[1] = 0x80 | (request->unit & 0x0f); 265 fis[2] = request->u.ata.command; 266 fis[3] = request->u.ata.feature; 267 fis[4] = request->u.ata.lba; 268 fis[5] = request->u.ata.lba >> 8; 269 fis[6] = request->u.ata.lba >> 16; 270 fis[7] = ATA_D_LBA; 271 if (!(request->flags & ATA_R_48BIT)) 272 fis[7] |= (ATA_D_IBM | (request->u.ata.lba >> 24 & 0x0f)); 273 fis[8] = request->u.ata.lba >> 24; 274 fis[9] = request->u.ata.lba >> 32; 275 fis[10] = request->u.ata.lba >> 40; 276 fis[11] = request->u.ata.feature >> 8; 277 fis[12] = request->u.ata.count; 278 fis[13] = request->u.ata.count >> 8; 279 fis[15] = ATA_A_4BIT; 280 return 20; 281 } 282 return 0; 283 } 284 285 void 286 ata_pm_identify(device_t dev) 287 { 288 struct ata_channel *ch = device_get_softc(dev); 289 u_int32_t pm_chipid, pm_revision, pm_ports; 290 int port; 291 292 /* get PM vendor & product data */ 293 if (ch->hw.pm_read(dev, ATA_PM, 0, &pm_chipid)) { 294 device_printf(dev, "error getting PM vendor data\n"); 295 return; 296 } 297 298 /* get PM revision data */ 299 if (ch->hw.pm_read(dev, ATA_PM, 1, &pm_revision)) { 300 device_printf(dev, "error getting PM revision data\n"); 301 return; 302 } 303 304 /* get number of HW ports on the PM */ 305 if (ch->hw.pm_read(dev, ATA_PM, 2, &pm_ports)) { 306 device_printf(dev, "error getting PM port info\n"); 307 return; 308 } 309 pm_ports &= 0x0000000f; 310 311 /* chip specific quirks */ 312 switch (pm_chipid) { 313 case 0x37261095: 314 /* This PM declares 6 ports, while only 5 of them are real. 315 * Port 5 is enclosure management bridge port, which has implementation 316 * problems, causing probe faults. Hide it for now. */ 317 device_printf(dev, "SiI 3726 (rev=%x) Port Multiplier with %d (5) ports\n", 318 pm_revision, pm_ports); 319 pm_ports = 5; 320 break; 321 322 case 0x47261095: 323 /* This PM declares 7 ports, while only 5 of them are real. 324 * Port 5 is some fake "Config Disk" with 640 sectors size, 325 * port 6 is enclosure management bridge port. 326 * Both fake ports has implementation problems, causing 327 * probe faults. Hide them for now. */ 328 device_printf(dev, "SiI 4726 (rev=%x) Port Multiplier with %d (5) ports\n", 329 pm_revision, pm_ports); 330 pm_ports = 5; 331 break; 332 333 default: 334 device_printf(dev, "Port Multiplier (id=%08x rev=%x) with %d ports\n", 335 pm_chipid, pm_revision, pm_ports); 336 } 337 338 /* reset all ports and register if anything connected */ 339 for (port=0; port < pm_ports; port++) { 340 u_int32_t signature; 341 342 if (!ata_sata_phy_reset(dev, port, 1)) 343 continue; 344 345 /* 346 * XXX: I have no idea how to properly wait for PMP port hardreset 347 * completion. Without this delay soft reset does not completes 348 * successfully. 349 */ 350 DELAY(1000000); 351 352 signature = ch->hw.softreset(dev, port); 353 354 if (bootverbose) 355 device_printf(dev, "p%d: SIGNATURE=%08x\n", port, signature); 356 357 /* figure out whats there */ 358 switch (signature >> 16) { 359 case 0x0000: 360 ch->devices |= (ATA_ATA_MASTER << port); 361 continue; 362 case 0xeb14: 363 ch->devices |= (ATA_ATAPI_MASTER << port); 364 continue; 365 } 366 } 367 } 368