1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 * $FreeBSD$ 29 */ 30 31 #if 0 32 #define ATA_LEGACY_SUPPORT /* Enable obsolete features that break 33 * some modern devices */ 34 #endif 35 36 /* ATA register defines */ 37 #define ATA_DATA 0 /* (RW) data */ 38 39 #define ATA_FEATURE 1 /* (W) feature */ 40 #define ATA_F_DMA 0x01 /* enable DMA */ 41 #define ATA_F_OVL 0x02 /* enable overlap */ 42 43 #define ATA_COUNT 2 /* (W) sector count */ 44 45 #define ATA_SECTOR 3 /* (RW) sector # */ 46 #define ATA_CYL_LSB 4 /* (RW) cylinder# LSB */ 47 #define ATA_CYL_MSB 5 /* (RW) cylinder# MSB */ 48 #define ATA_DRIVE 6 /* (W) Sector/Drive/Head */ 49 #define ATA_D_LBA 0x40 /* use LBA addressing */ 50 #define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */ 51 52 #define ATA_COMMAND 7 /* (W) command */ 53 54 #define ATA_ERROR 8 /* (R) error */ 55 #define ATA_E_ILI 0x01 /* illegal length */ 56 #define ATA_E_NM 0x02 /* no media */ 57 #define ATA_E_ABORT 0x04 /* command aborted */ 58 #define ATA_E_MCR 0x08 /* media change request */ 59 #define ATA_E_IDNF 0x10 /* ID not found */ 60 #define ATA_E_MC 0x20 /* media changed */ 61 #define ATA_E_UNC 0x40 /* uncorrectable data */ 62 #define ATA_E_ICRC 0x80 /* UDMA crc error */ 63 #define ATA_E_ATAPI_SENSE_MASK 0xf0 /* ATAPI sense key mask */ 64 65 #define ATA_IREASON 9 /* (R) interrupt reason */ 66 #define ATA_I_CMD 0x01 /* cmd (1) | data (0) */ 67 #define ATA_I_IN 0x02 /* read (1) | write (0) */ 68 #define ATA_I_RELEASE 0x04 /* released bus (1) */ 69 #define ATA_I_TAGMASK 0xf8 /* tag mask */ 70 71 #define ATA_STATUS 10 /* (R) status */ 72 #define ATA_ALTSTAT 11 /* (R) alternate status */ 73 #define ATA_S_ERROR 0x01 /* error */ 74 #define ATA_S_INDEX 0x02 /* index */ 75 #define ATA_S_CORR 0x04 /* data corrected */ 76 #define ATA_S_DRQ 0x08 /* data request */ 77 #define ATA_S_DSC 0x10 /* drive seek completed */ 78 #define ATA_S_SERVICE 0x10 /* drive needs service */ 79 #define ATA_S_DWF 0x20 /* drive write fault */ 80 #define ATA_S_DMA 0x20 /* DMA ready */ 81 #define ATA_S_READY 0x40 /* drive ready */ 82 #define ATA_S_BUSY 0x80 /* busy */ 83 84 #define ATA_CONTROL 12 /* (W) control */ 85 86 #define ATA_CTLOFFSET 0x206 /* control register offset */ 87 #define ATA_PCCARD_CTLOFFSET 0x0e /* do for PCCARD devices */ 88 #define ATA_A_IDS 0x02 /* disable interrupts */ 89 #define ATA_A_RESET 0x04 /* RESET controller */ 90 #ifdef ATA_LEGACY_SUPPORT 91 #define ATA_A_4BIT 0x08 /* 4 head bits: obsolete 1996 */ 92 #else 93 #define ATA_A_4BIT 0x00 94 #endif 95 #define ATA_A_HOB 0x80 /* High Order Byte enable */ 96 97 /* SATA register defines */ 98 #define ATA_SSTATUS 13 99 #define ATA_SS_DET_MASK 0x0000000f 100 #define ATA_SS_DET_NO_DEVICE 0x00000000 101 #define ATA_SS_DET_DEV_PRESENT 0x00000001 102 #define ATA_SS_DET_PHY_ONLINE 0x00000003 103 #define ATA_SS_DET_PHY_OFFLINE 0x00000004 104 105 #define ATA_SS_SPD_MASK 0x000000f0 106 #define ATA_SS_SPD_NO_SPEED 0x00000000 107 #define ATA_SS_SPD_GEN1 0x00000010 108 #define ATA_SS_SPD_GEN2 0x00000020 109 #define ATA_SS_SPD_GEN3 0x00000030 110 111 #define ATA_SS_IPM_MASK 0x00000f00 112 #define ATA_SS_IPM_NO_DEVICE 0x00000000 113 #define ATA_SS_IPM_ACTIVE 0x00000100 114 #define ATA_SS_IPM_PARTIAL 0x00000200 115 #define ATA_SS_IPM_SLUMBER 0x00000600 116 117 #define ATA_SERROR 14 118 #define ATA_SE_DATA_CORRECTED 0x00000001 119 #define ATA_SE_COMM_CORRECTED 0x00000002 120 #define ATA_SE_DATA_ERR 0x00000100 121 #define ATA_SE_COMM_ERR 0x00000200 122 #define ATA_SE_PROT_ERR 0x00000400 123 #define ATA_SE_HOST_ERR 0x00000800 124 #define ATA_SE_PHY_CHANGED 0x00010000 125 #define ATA_SE_PHY_IERROR 0x00020000 126 #define ATA_SE_COMM_WAKE 0x00040000 127 #define ATA_SE_DECODE_ERR 0x00080000 128 #define ATA_SE_PARITY_ERR 0x00100000 129 #define ATA_SE_CRC_ERR 0x00200000 130 #define ATA_SE_HANDSHAKE_ERR 0x00400000 131 #define ATA_SE_LINKSEQ_ERR 0x00800000 132 #define ATA_SE_TRANSPORT_ERR 0x01000000 133 #define ATA_SE_UNKNOWN_FIS 0x02000000 134 135 #define ATA_SCONTROL 15 136 #define ATA_SC_DET_MASK 0x0000000f 137 #define ATA_SC_DET_IDLE 0x00000000 138 #define ATA_SC_DET_RESET 0x00000001 139 #define ATA_SC_DET_DISABLE 0x00000004 140 141 #define ATA_SC_SPD_MASK 0x000000f0 142 #define ATA_SC_SPD_NO_SPEED 0x00000000 143 #define ATA_SC_SPD_SPEED_GEN1 0x00000010 144 #define ATA_SC_SPD_SPEED_GEN2 0x00000020 145 #define ATA_SC_SPD_SPEED_GEN3 0x00000030 146 147 #define ATA_SC_IPM_MASK 0x00000f00 148 #define ATA_SC_IPM_NONE 0x00000000 149 #define ATA_SC_IPM_DIS_PARTIAL 0x00000100 150 #define ATA_SC_IPM_DIS_SLUMBER 0x00000200 151 152 #define ATA_SACTIVE 16 153 154 /* DMA register defines */ 155 #define ATA_DMA_ENTRIES 256 156 #define ATA_DMA_EOT 0x80000000 157 158 #define ATA_BMCMD_PORT 17 159 #define ATA_BMCMD_START_STOP 0x01 160 #define ATA_BMCMD_WRITE_READ 0x08 161 162 #define ATA_BMDEVSPEC_0 18 163 #define ATA_BMSTAT_PORT 19 164 #define ATA_BMSTAT_ACTIVE 0x01 165 #define ATA_BMSTAT_ERROR 0x02 166 #define ATA_BMSTAT_INTERRUPT 0x04 167 #define ATA_BMSTAT_MASK 0x07 168 #define ATA_BMSTAT_DMA_MASTER 0x20 169 #define ATA_BMSTAT_DMA_SLAVE 0x40 170 #define ATA_BMSTAT_DMA_SIMPLEX 0x80 171 172 #define ATA_BMDEVSPEC_1 20 173 #define ATA_BMDTP_PORT 21 174 175 #define ATA_IDX_ADDR 22 176 #define ATA_IDX_DATA 23 177 #define ATA_MAX_RES 24 178 179 /* misc defines */ 180 #define ATA_PRIMARY 0x1f0 181 #define ATA_SECONDARY 0x170 182 #define ATA_IOSIZE 0x08 183 #define ATA_CTLIOSIZE 0x01 184 #define ATA_BMIOSIZE 0x08 185 #define ATA_IOADDR_RID 0 186 #define ATA_CTLADDR_RID 1 187 #define ATA_BMADDR_RID 0x20 188 #define ATA_IRQ_RID 0 189 #define ATA_DEV(unit) ((unit > 0) ? 0x10 : 0) 190 #define ATA_CFA_MAGIC1 0x844A 191 #define ATA_CFA_MAGIC2 0x848A 192 #define ATA_CFA_MAGIC3 0x8400 193 #define ATAPI_MAGIC_LSB 0x14 194 #define ATAPI_MAGIC_MSB 0xeb 195 #define ATAPI_P_READ (ATA_S_DRQ | ATA_I_IN) 196 #define ATAPI_P_WRITE (ATA_S_DRQ) 197 #define ATAPI_P_CMDOUT (ATA_S_DRQ | ATA_I_CMD) 198 #define ATAPI_P_DONEDRQ (ATA_S_DRQ | ATA_I_CMD | ATA_I_IN) 199 #define ATAPI_P_DONE (ATA_I_CMD | ATA_I_IN) 200 #define ATAPI_P_ABORT 0 201 #define ATA_INTR_FLAGS (INTR_MPSAFE|INTR_TYPE_BIO|INTR_ENTROPY) 202 #define ATA_OP_CONTINUES 0 203 #define ATA_OP_FINISHED 1 204 #define ATA_MAX_28BIT_LBA 268435455UL 205 206 #ifndef ATA_REQUEST_TIMEOUT 207 #define ATA_REQUEST_TIMEOUT 10 208 #endif 209 210 /* structure used for composite atomic operations */ 211 #define MAX_COMPOSITES 32 /* u_int32_t bits */ 212 struct ata_composite { 213 struct mtx lock; /* control lock */ 214 u_int32_t rd_needed; /* needed read subdisks */ 215 u_int32_t rd_done; /* done read subdisks */ 216 u_int32_t wr_needed; /* needed write subdisks */ 217 u_int32_t wr_depend; /* write depends on subdisks */ 218 u_int32_t wr_done; /* done write subdisks */ 219 struct ata_request *request[MAX_COMPOSITES]; 220 u_int32_t residual; /* bytes still to transfer */ 221 caddr_t data_1; 222 caddr_t data_2; 223 }; 224 225 /* structure used to queue an ATA/ATAPI request */ 226 struct ata_request { 227 device_t dev; /* device handle */ 228 device_t parent; /* channel handle */ 229 int unit; /* physical unit */ 230 union { 231 struct { 232 u_int8_t command; /* command reg */ 233 u_int16_t feature; /* feature reg */ 234 u_int16_t count; /* count reg */ 235 u_int64_t lba; /* lba reg */ 236 } ata; 237 struct { 238 u_int8_t ccb[16]; /* ATAPI command block */ 239 struct atapi_sense sense; /* ATAPI request sense data */ 240 u_int8_t saved_cmd; /* ATAPI saved command */ 241 } atapi; 242 } u; 243 u_int32_t bytecount; /* bytes to transfer */ 244 u_int32_t transfersize; /* bytes pr transfer */ 245 caddr_t data; /* pointer to data buf */ 246 u_int32_t tag; /* HW tag of this request */ 247 int flags; 248 #define ATA_R_CONTROL 0x00000001 249 #define ATA_R_READ 0x00000002 250 #define ATA_R_WRITE 0x00000004 251 #define ATA_R_ATAPI 0x00000008 252 #define ATA_R_DMA 0x00000010 253 #define ATA_R_QUIET 0x00000020 254 #define ATA_R_TIMEOUT 0x00000040 255 #define ATA_R_48BIT 0x00000080 256 257 #define ATA_R_ORDERED 0x00000100 258 #define ATA_R_AT_HEAD 0x00000200 259 #define ATA_R_REQUEUE 0x00000400 260 #define ATA_R_THREAD 0x00000800 261 #define ATA_R_DIRECT 0x00001000 262 #define ATA_R_NEEDRESULT 0x00002000 263 #define ATA_R_DATA_IN_CCB 0x00004000 264 265 #define ATA_R_ATAPI16 0x00010000 266 #define ATA_R_ATAPI_INTR 0x00020000 267 268 #define ATA_R_DEBUG 0x10000000 269 #define ATA_R_DANGER1 0x20000000 270 #define ATA_R_DANGER2 0x40000000 271 272 struct ata_dmaslot *dma; /* DMA slot of this request */ 273 u_int8_t status; /* ATA status */ 274 u_int8_t error; /* ATA error */ 275 u_int32_t donecount; /* bytes transferred */ 276 int result; /* result error code */ 277 void (*callback)(struct ata_request *request); 278 struct sema done; /* request done sema */ 279 int retries; /* retry count */ 280 int timeout; /* timeout for this cmd */ 281 struct callout callout; /* callout management */ 282 struct task task; /* task management */ 283 struct bio *bio; /* bio for this request */ 284 int this; /* this request ID */ 285 struct ata_composite *composite; /* for composite atomic ops */ 286 void *driver; /* driver specific */ 287 TAILQ_ENTRY(ata_request) chain; /* list management */ 288 union ccb *ccb; 289 }; 290 291 /* define this for debugging request processing */ 292 #if 0 293 #define ATA_DEBUG_RQ(request, string) \ 294 { \ 295 if (request->flags & ATA_R_DEBUG) \ 296 device_printf(request->parent, "req=%p %s " string "\n", \ 297 request, ata_cmd2str(request)); \ 298 } 299 #else 300 #define ATA_DEBUG_RQ(request, string) 301 #endif 302 303 304 /* structure describing an ATA/ATAPI device */ 305 struct ata_device { 306 device_t dev; /* device handle */ 307 int unit; /* physical unit */ 308 #define ATA_MASTER 0x00 309 #define ATA_SLAVE 0x01 310 #define ATA_PM 0x0f 311 312 struct ata_params param; /* ata param structure */ 313 int mode; /* current transfermode */ 314 u_int32_t max_iosize; /* max IO size */ 315 int spindown; /* idle spindown timeout */ 316 struct callout spindown_timer; 317 int spindown_state; 318 int flags; 319 #define ATA_D_USE_CHS 0x0001 320 #define ATA_D_MEDIA_CHANGED 0x0002 321 #define ATA_D_ENC_PRESENT 0x0004 322 }; 323 324 /* structure for holding DMA Physical Region Descriptors (PRD) entries */ 325 struct ata_dma_prdentry { 326 u_int32_t addr; 327 u_int32_t count; 328 }; 329 330 /* structure used by the setprd function */ 331 struct ata_dmasetprd_args { 332 void *dmatab; 333 int nsegs; 334 int error; 335 }; 336 337 struct ata_dmaslot { 338 u_int8_t status; /* DMA status */ 339 bus_dma_tag_t sg_tag; /* SG list DMA tag */ 340 bus_dmamap_t sg_map; /* SG list DMA map */ 341 void *sg; /* DMA transfer table */ 342 bus_addr_t sg_bus; /* bus address of dmatab */ 343 bus_dma_tag_t data_tag; /* data DMA tag */ 344 bus_dmamap_t data_map; /* data DMA map */ 345 }; 346 347 /* structure holding DMA related information */ 348 struct ata_dma { 349 bus_dma_tag_t dmatag; /* parent DMA tag */ 350 bus_dma_tag_t work_tag; /* workspace DMA tag */ 351 bus_dmamap_t work_map; /* workspace DMA map */ 352 u_int8_t *work; /* workspace */ 353 bus_addr_t work_bus; /* bus address of dmatab */ 354 355 #define ATA_DMA_SLOTS 1 356 int dma_slots; /* DMA slots allocated */ 357 struct ata_dmaslot slot[ATA_DMA_SLOTS]; 358 u_int32_t alignment; /* DMA SG list alignment */ 359 u_int32_t boundary; /* DMA SG list boundary */ 360 u_int32_t segsize; /* DMA SG list segment size */ 361 u_int32_t max_iosize; /* DMA data max IO size */ 362 u_int64_t max_address; /* highest DMA'able address */ 363 int flags; 364 #define ATA_DMA_ACTIVE 0x01 /* DMA transfer in progress */ 365 366 void (*alloc)(device_t dev); 367 void (*free)(device_t dev); 368 void (*setprd)(void *xsc, bus_dma_segment_t *segs, int nsegs, int error); 369 int (*load)(struct ata_request *request, void *addr, int *nsegs); 370 int (*unload)(struct ata_request *request); 371 int (*start)(struct ata_request *request); 372 int (*stop)(struct ata_request *request); 373 void (*reset)(device_t dev); 374 }; 375 376 /* structure holding lowlevel functions */ 377 struct ata_lowlevel { 378 u_int32_t (*softreset)(device_t dev, int pmport); 379 int (*pm_read)(device_t dev, int port, int reg, u_int32_t *result); 380 int (*pm_write)(device_t dev, int port, int reg, u_int32_t value); 381 int (*status)(device_t dev); 382 int (*begin_transaction)(struct ata_request *request); 383 int (*end_transaction)(struct ata_request *request); 384 int (*command)(struct ata_request *request); 385 void (*tf_read)(struct ata_request *request); 386 void (*tf_write)(struct ata_request *request); 387 }; 388 389 /* structure holding resources for an ATA channel */ 390 struct ata_resource { 391 struct resource *res; 392 int offset; 393 }; 394 395 struct ata_cam_device { 396 u_int revision; 397 int mode; 398 u_int bytecount; 399 u_int atapi; 400 u_int caps; 401 }; 402 403 /* structure describing an ATA channel */ 404 struct ata_channel { 405 device_t dev; /* device handle */ 406 int unit; /* physical channel */ 407 int attached; /* channel is attached */ 408 struct ata_resource r_io[ATA_MAX_RES];/* I/O resources */ 409 struct resource *r_irq; /* interrupt of this channel */ 410 void *ih; /* interrupt handle */ 411 struct ata_lowlevel hw; /* lowlevel HW functions */ 412 struct ata_dma dma; /* DMA data / functions */ 413 int flags; /* channel flags */ 414 #define ATA_NO_SLAVE 0x01 415 #define ATA_USE_16BIT 0x02 416 #define ATA_ATAPI_DMA_RO 0x04 417 #define ATA_NO_48BIT_DMA 0x08 418 #define ATA_ALWAYS_DMASTAT 0x10 419 #define ATA_CHECKS_CABLE 0x20 420 #define ATA_NO_ATAPI_DMA 0x40 421 #define ATA_SATA 0x80 422 #define ATA_DMA_BEFORE_CMD 0x100 423 #define ATA_KNOWN_PRESENCE 0x200 424 #define ATA_STATUS_IS_LONG 0x400 425 #define ATA_PERIODIC_POLL 0x800 426 427 int pm_level; /* power management level */ 428 int devices; /* what is present */ 429 #define ATA_ATA_MASTER 0x00000001 430 #define ATA_ATA_SLAVE 0x00000002 431 #define ATA_PORTMULTIPLIER 0x00008000 432 #define ATA_ATAPI_MASTER 0x00010000 433 #define ATA_ATAPI_SLAVE 0x00020000 434 435 struct mtx state_mtx; /* state lock */ 436 int state; /* ATA channel state */ 437 #define ATA_IDLE 0x0000 438 #define ATA_ACTIVE 0x0001 439 #define ATA_STALL_QUEUE 0x0002 440 441 struct ata_request *running; /* currently running request */ 442 struct task conntask; /* PHY events handling task */ 443 struct cam_sim *sim; 444 struct cam_path *path; 445 struct ata_cam_device user[16]; /* User-specified settings */ 446 struct ata_cam_device curr[16]; /* Current settings */ 447 int requestsense; /* CCB waiting for SENSE. */ 448 struct callout poll_callout; /* Periodic status poll. */ 449 struct ata_request request; 450 }; 451 452 /* disk bay/enclosure related */ 453 #define ATA_LED_OFF 0x00 454 #define ATA_LED_RED 0x01 455 #define ATA_LED_GREEN 0x02 456 #define ATA_LED_ORANGE 0x03 457 #define ATA_LED_MASK 0x03 458 459 /* externs */ 460 extern int (*ata_raid_ioctl_func)(u_long cmd, caddr_t data); 461 extern struct intr_config_hook *ata_delayed_attach; 462 extern devclass_t ata_devclass; 463 extern int ata_wc; 464 extern int ata_setmax; 465 extern int ata_dma_check_80pin; 466 467 /* public prototypes */ 468 /* ata-all.c: */ 469 int ata_probe(device_t dev); 470 int ata_attach(device_t dev); 471 int ata_detach(device_t dev); 472 int ata_reinit(device_t dev); 473 int ata_suspend(device_t dev); 474 int ata_resume(device_t dev); 475 void ata_interrupt(void *data); 476 int ata_getparam(struct ata_device *atadev, int init); 477 void ata_default_registers(device_t dev); 478 void ata_udelay(int interval); 479 const char *ata_cmd2str(struct ata_request *request); 480 const char *ata_mode2str(int mode); 481 void ata_setmode(device_t dev); 482 void ata_print_cable(device_t dev, u_int8_t *who); 483 int ata_atapi(device_t dev, int target); 484 void ata_timeout(struct ata_request *); 485 486 /* ata-lowlevel.c: */ 487 void ata_generic_hw(device_t dev); 488 int ata_begin_transaction(struct ata_request *); 489 int ata_end_transaction(struct ata_request *); 490 void ata_generic_reset(device_t dev); 491 int ata_generic_command(struct ata_request *request); 492 493 /* ata-dma.c: */ 494 void ata_dmainit(device_t); 495 void ata_dmafini(device_t dev); 496 497 /* ata-sata.c: */ 498 void ata_sata_phy_check_events(device_t dev, int port); 499 int ata_sata_scr_read(struct ata_channel *ch, int port, int reg, uint32_t *val); 500 int ata_sata_scr_write(struct ata_channel *ch, int port, int reg, uint32_t val); 501 int ata_sata_phy_reset(device_t dev, int port, int quick); 502 int ata_sata_setmode(device_t dev, int target, int mode); 503 int ata_sata_getrev(device_t dev, int target); 504 int ata_request2fis_h2d(struct ata_request *request, u_int8_t *fis); 505 void ata_pm_identify(device_t dev); 506 507 MALLOC_DECLARE(M_ATA); 508 509 /* misc newbus defines */ 510 #define GRANDPARENT(dev) device_get_parent(device_get_parent(dev)) 511 512 /* macros to hide busspace uglyness */ 513 #define ATA_INB(res, offset) \ 514 bus_read_1((res), (offset)) 515 516 #define ATA_INW(res, offset) \ 517 bus_read_2((res), (offset)) 518 #define ATA_INW_STRM(res, offset) \ 519 bus_read_stream_2((res), (offset)) 520 #define ATA_INL(res, offset) \ 521 bus_read_4((res), (offset)) 522 #define ATA_INSW(res, offset, addr, count) \ 523 bus_read_multi_2((res), (offset), (addr), (count)) 524 #define ATA_INSW_STRM(res, offset, addr, count) \ 525 bus_read_multi_stream_2((res), (offset), (addr), (count)) 526 #define ATA_INSL(res, offset, addr, count) \ 527 bus_read_multi_4((res), (offset), (addr), (count)) 528 #define ATA_INSL_STRM(res, offset, addr, count) \ 529 bus_read_multi_stream_4((res), (offset), (addr), (count)) 530 #define ATA_OUTB(res, offset, value) \ 531 bus_write_1((res), (offset), (value)) 532 #define ATA_OUTW(res, offset, value) \ 533 bus_write_2((res), (offset), (value)) 534 #define ATA_OUTW_STRM(res, offset, value) \ 535 bus_write_stream_2((res), (offset), (value)) 536 #define ATA_OUTL(res, offset, value) \ 537 bus_write_4((res), (offset), (value)) 538 #define ATA_OUTSW(res, offset, addr, count) \ 539 bus_write_multi_2((res), (offset), (addr), (count)) 540 #define ATA_OUTSW_STRM(res, offset, addr, count) \ 541 bus_write_multi_stream_2((res), (offset), (addr), (count)) 542 #define ATA_OUTSL(res, offset, addr, count) \ 543 bus_write_multi_4((res), (offset), (addr), (count)) 544 #define ATA_OUTSL_STRM(res, offset, addr, count) \ 545 bus_write_multi_stream_4((res), (offset), (addr), (count)) 546 547 #define ATA_IDX_INB(ch, idx) \ 548 ATA_INB(ch->r_io[idx].res, ch->r_io[idx].offset) 549 550 #define ATA_IDX_INW(ch, idx) \ 551 ATA_INW(ch->r_io[idx].res, ch->r_io[idx].offset) 552 553 #define ATA_IDX_INW_STRM(ch, idx) \ 554 ATA_INW_STRM(ch->r_io[idx].res, ch->r_io[idx].offset) 555 556 #define ATA_IDX_INL(ch, idx) \ 557 ATA_INL(ch->r_io[idx].res, ch->r_io[idx].offset) 558 559 #define ATA_IDX_INSW(ch, idx, addr, count) \ 560 ATA_INSW(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) 561 562 #define ATA_IDX_INSW_STRM(ch, idx, addr, count) \ 563 ATA_INSW_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) 564 565 #define ATA_IDX_INSL(ch, idx, addr, count) \ 566 ATA_INSL(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) 567 568 #define ATA_IDX_INSL_STRM(ch, idx, addr, count) \ 569 ATA_INSL_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) 570 571 #define ATA_IDX_OUTB(ch, idx, value) \ 572 ATA_OUTB(ch->r_io[idx].res, ch->r_io[idx].offset, value) 573 574 #define ATA_IDX_OUTW(ch, idx, value) \ 575 ATA_OUTW(ch->r_io[idx].res, ch->r_io[idx].offset, value) 576 577 #define ATA_IDX_OUTW_STRM(ch, idx, value) \ 578 ATA_OUTW_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, value) 579 580 #define ATA_IDX_OUTL(ch, idx, value) \ 581 ATA_OUTL(ch->r_io[idx].res, ch->r_io[idx].offset, value) 582 583 #define ATA_IDX_OUTSW(ch, idx, addr, count) \ 584 ATA_OUTSW(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) 585 586 #define ATA_IDX_OUTSW_STRM(ch, idx, addr, count) \ 587 ATA_OUTSW_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) 588 589 #define ATA_IDX_OUTSL(ch, idx, addr, count) \ 590 ATA_OUTSL(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) 591 592 #define ATA_IDX_OUTSL_STRM(ch, idx, addr, count) \ 593 ATA_OUTSL_STRM(ch->r_io[idx].res, ch->r_io[idx].offset, addr, count) 594