1 /*- 2 * Aic7xxx SCSI host adapter firmware asssembler 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 * 6 * Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs. 7 * Copyright (c) 2001, 2002 Adaptec Inc. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions, and the following disclaimer, 15 * without modification. 16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 17 * substantially similar to the "NO WARRANTY" disclaimer below 18 * ("Disclaimer") and any redistribution must be conditioned upon 19 * including a substantially similar Disclaimer requirement for further 20 * binary redistribution. 21 * 3. Neither the names of the above-listed copyright holders nor the names 22 * of any contributors may be used to endorse or promote products derived 23 * from this software without specific prior written permission. 24 * 25 * Alternatively, this software may be distributed under the terms of the 26 * GNU General Public License ("GPL") version 2 as published by the Free 27 * Software Foundation. 28 * 29 * NO WARRANTY 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 34 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 35 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 36 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 37 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 38 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 39 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 40 * POSSIBILITY OF SUCH DAMAGES. 41 * 42 * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $ 43 * 44 * $FreeBSD$ 45 */ 46 #include <sys/types.h> 47 #include <sys/mman.h> 48 49 #include <ctype.h> 50 #include <inttypes.h> 51 #include <regex.h> 52 #include <stdio.h> 53 #include <stdlib.h> 54 #include <string.h> 55 #include <sysexits.h> 56 #include <unistd.h> 57 58 #if defined(__linux__) || defined(__GLIBC__) 59 #include <endian.h> 60 #else 61 #include <machine/endian.h> 62 #endif 63 64 #include "aicasm.h" 65 #include "aicasm_symbol.h" 66 #include "aicasm_insformat.h" 67 68 typedef struct patch { 69 STAILQ_ENTRY(patch) links; 70 int patch_func; 71 u_int begin; 72 u_int skip_instr; 73 u_int skip_patch; 74 } patch_t; 75 76 STAILQ_HEAD(patch_list, patch) patches; 77 78 static void usage(void); 79 static void back_patch(void); 80 static void output_code(void); 81 static void output_listing(char *ifilename); 82 static void dump_scope(scope_t *scope); 83 static void emit_patch(scope_t *scope, int patch); 84 static int check_patch(patch_t **start_patch, unsigned int start_instr, 85 unsigned int *skip_addr, int *func_vals); 86 87 struct path_list search_path; 88 int includes_search_curdir; 89 char *appname; 90 char *stock_include_file; 91 FILE *ofile; 92 char *ofilename; 93 char *regfilename; 94 FILE *regfile; 95 char *listfilename; 96 FILE *listfile; 97 char *regdiagfilename; 98 FILE *regdiagfile; 99 int src_mode; 100 int dst_mode; 101 102 static STAILQ_HEAD(,instruction) seq_program; 103 struct cs_tailq cs_tailq; 104 struct scope_list scope_stack; 105 symlist_t patch_functions; 106 107 #if DEBUG 108 extern int yy_flex_debug; 109 extern int mm_flex_debug; 110 extern int yydebug; 111 extern int mmdebug; 112 #endif 113 extern FILE *yyin; 114 extern int yyparse(void); 115 116 int main(int argc, char *argv[]); 117 118 int 119 main(int argc, char *argv[]) 120 { 121 int ch; 122 int retval; 123 char *inputfilename; 124 scope_t *sentinal; 125 126 STAILQ_INIT(&patches); 127 SLIST_INIT(&search_path); 128 STAILQ_INIT(&seq_program); 129 TAILQ_INIT(&cs_tailq); 130 SLIST_INIT(&scope_stack); 131 132 /* Set Sentinal scope node */ 133 sentinal = scope_alloc(); 134 sentinal->type = SCOPE_ROOT; 135 136 includes_search_curdir = 1; 137 appname = *argv; 138 regfile = NULL; 139 listfile = NULL; 140 #if DEBUG 141 yy_flex_debug = 0; 142 mm_flex_debug = 0; 143 yydebug = 0; 144 mmdebug = 0; 145 #endif 146 while ((ch = getopt(argc, argv, "d:i:l:n:o:p:r:I:X")) != -1) { 147 switch(ch) { 148 case 'd': 149 #if DEBUG 150 if (strcmp(optarg, "s") == 0) { 151 yy_flex_debug = 1; 152 mm_flex_debug = 1; 153 } else if (strcmp(optarg, "p") == 0) { 154 yydebug = 1; 155 mmdebug = 1; 156 } else { 157 fprintf(stderr, "%s: -d Requires either an " 158 "'s' or 'p' argument\n", appname); 159 usage(); 160 } 161 #else 162 stop("-d: Assembler not built with debugging " 163 "information", EX_SOFTWARE); 164 #endif 165 break; 166 case 'i': 167 stock_include_file = optarg; 168 break; 169 case 'l': 170 /* Create a program listing */ 171 if ((listfile = fopen(optarg, "w")) == NULL) { 172 perror(optarg); 173 stop(NULL, EX_CANTCREAT); 174 } 175 listfilename = optarg; 176 break; 177 case 'n': 178 /* Don't complain about the -nostdinc directive */ 179 if (strcmp(optarg, "ostdinc")) { 180 fprintf(stderr, "%s: Unknown option -%c%s\n", 181 appname, ch, optarg); 182 usage(); 183 /* NOTREACHED */ 184 } 185 break; 186 case 'o': 187 if ((ofile = fopen(optarg, "w")) == NULL) { 188 perror(optarg); 189 stop(NULL, EX_CANTCREAT); 190 } 191 ofilename = optarg; 192 break; 193 case 'p': 194 /* Create Register Diagnostic "printing" Functions */ 195 if ((regdiagfile = fopen(optarg, "w")) == NULL) { 196 perror(optarg); 197 stop(NULL, EX_CANTCREAT); 198 } 199 regdiagfilename = optarg; 200 break; 201 case 'r': 202 if ((regfile = fopen(optarg, "w")) == NULL) { 203 perror(optarg); 204 stop(NULL, EX_CANTCREAT); 205 } 206 regfilename = optarg; 207 break; 208 case 'I': 209 { 210 path_entry_t include_dir; 211 212 if (strcmp(optarg, "-") == 0) { 213 if (includes_search_curdir == 0) { 214 fprintf(stderr, "%s: Warning - '-I-' " 215 "specified multiple " 216 "times\n", appname); 217 } 218 includes_search_curdir = 0; 219 for (include_dir = SLIST_FIRST(&search_path); 220 include_dir != NULL; 221 include_dir = SLIST_NEXT(include_dir, 222 links)) 223 /* 224 * All entries before a '-I-' only 225 * apply to includes specified with 226 * quotes instead of "<>". 227 */ 228 include_dir->quoted_includes_only = 1; 229 } else { 230 include_dir = 231 (path_entry_t)malloc(sizeof(*include_dir)); 232 if (include_dir == NULL) { 233 perror(optarg); 234 stop(NULL, EX_OSERR); 235 } 236 include_dir->directory = strdup(optarg); 237 if (include_dir->directory == NULL) { 238 perror(optarg); 239 stop(NULL, EX_OSERR); 240 } 241 include_dir->quoted_includes_only = 0; 242 SLIST_INSERT_HEAD(&search_path, include_dir, 243 links); 244 } 245 break; 246 } 247 case 'X': 248 /* icc version of -nostdinc */ 249 break; 250 case '?': 251 default: 252 usage(); 253 /* NOTREACHED */ 254 } 255 } 256 argc -= optind; 257 argv += optind; 258 259 if (argc != 1) { 260 fprintf(stderr, "%s: No input file specified\n", appname); 261 usage(); 262 /* NOTREACHED */ 263 } 264 265 if (regdiagfile != NULL 266 && (regfile == NULL || stock_include_file == NULL)) { 267 fprintf(stderr, 268 "%s: The -p option requires the -r and -i options.\n", 269 appname); 270 usage(); 271 /* NOTREACHED */ 272 } 273 symtable_open(); 274 inputfilename = *argv; 275 include_file(*argv, SOURCE_FILE); 276 retval = yyparse(); 277 if (retval == 0) { 278 if (SLIST_FIRST(&scope_stack) == NULL 279 || SLIST_FIRST(&scope_stack)->type != SCOPE_ROOT) { 280 stop("Unterminated conditional expression", EX_DATAERR); 281 /* NOTREACHED */ 282 } 283 284 /* Process outmost scope */ 285 process_scope(SLIST_FIRST(&scope_stack)); 286 /* 287 * Descend the tree of scopes and insert/emit 288 * patches as appropriate. We perform a depth first 289 * transversal, recursively handling each scope. 290 */ 291 /* start at the root scope */ 292 dump_scope(SLIST_FIRST(&scope_stack)); 293 294 /* Patch up forward jump addresses */ 295 back_patch(); 296 297 if (ofile != NULL) 298 output_code(); 299 if (regfile != NULL) 300 symtable_dump(regfile, regdiagfile); 301 if (listfile != NULL) 302 output_listing(inputfilename); 303 } 304 305 stop(NULL, 0); 306 /* NOTREACHED */ 307 return (0); 308 } 309 310 static void 311 usage(void) 312 { 313 314 (void)fprintf(stderr, 315 "usage: %-16s [-nostdinc|-X] [-I-] [-I directory] [-o output_file]\n" 316 " [-r register_output_file [-p register_diag_file -i includefile]]\n" 317 " [-l program_list_file]\n" 318 " input_file\n", appname); 319 exit(EX_USAGE); 320 } 321 322 static void 323 back_patch(void) 324 { 325 struct instruction *cur_instr; 326 327 for (cur_instr = STAILQ_FIRST(&seq_program); 328 cur_instr != NULL; 329 cur_instr = STAILQ_NEXT(cur_instr, links)) { 330 if (cur_instr->patch_label != NULL) { 331 struct ins_format3 *f3_instr; 332 u_int address; 333 334 if (cur_instr->patch_label->type != LABEL) { 335 char buf[255]; 336 337 snprintf(buf, sizeof(buf), 338 "Undefined label %s", 339 cur_instr->patch_label->name); 340 stop(buf, EX_DATAERR); 341 /* NOTREACHED */ 342 } 343 f3_instr = &cur_instr->format.format3; 344 address = f3_instr->address; 345 address += cur_instr->patch_label->info.linfo->address; 346 f3_instr->address = address; 347 } 348 } 349 } 350 351 static void 352 output_code(void) 353 { 354 struct instruction *cur_instr; 355 patch_t *cur_patch; 356 critical_section_t *cs; 357 symbol_node_t *cur_node; 358 int instrcount; 359 360 instrcount = 0; 361 fprintf(ofile, 362 "/*\n" 363 " * DO NOT EDIT - This file is automatically generated\n" 364 " * from the following source files:\n" 365 " *\n" 366 "%s */\n", versions); 367 368 fprintf(ofile, "static uint8_t seqprog[] = {\n"); 369 for (cur_instr = STAILQ_FIRST(&seq_program); 370 cur_instr != NULL; 371 cur_instr = STAILQ_NEXT(cur_instr, links)) { 372 fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x", 373 cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n", 374 #if BYTE_ORDER == LITTLE_ENDIAN 375 cur_instr->format.bytes[0], 376 cur_instr->format.bytes[1], 377 cur_instr->format.bytes[2], 378 cur_instr->format.bytes[3]); 379 #else 380 cur_instr->format.bytes[3], 381 cur_instr->format.bytes[2], 382 cur_instr->format.bytes[1], 383 cur_instr->format.bytes[0]); 384 #endif 385 instrcount++; 386 } 387 fprintf(ofile, "\n};\n\n"); 388 389 if (patch_arg_list == NULL) 390 stop("Patch argument list not defined", 391 EX_DATAERR); 392 393 /* 394 * Output patch information. Patch functions first. 395 */ 396 fprintf(ofile, 397 "typedef int %spatch_func_t (%s);\n", prefix, patch_arg_list); 398 399 for (cur_node = SLIST_FIRST(&patch_functions); 400 cur_node != NULL; 401 cur_node = SLIST_NEXT(cur_node,links)) { 402 fprintf(ofile, 403 "static %spatch_func_t %spatch%d_func;\n" 404 "\n" 405 "static int\n" 406 "%spatch%d_func(%s)\n" 407 "{\n" 408 " return (%s);\n" 409 "}\n\n", 410 prefix, 411 prefix, 412 cur_node->symbol->info.condinfo->func_num, 413 prefix, 414 cur_node->symbol->info.condinfo->func_num, 415 patch_arg_list, 416 cur_node->symbol->name); 417 } 418 419 fprintf(ofile, 420 "static struct patch {\n" 421 " %spatch_func_t *patch_func;\n" 422 " uint32_t begin :10,\n" 423 " skip_instr :10,\n" 424 " skip_patch :12;\n" 425 "} patches[] = {\n", prefix); 426 427 for (cur_patch = STAILQ_FIRST(&patches); 428 cur_patch != NULL; 429 cur_patch = STAILQ_NEXT(cur_patch,links)) { 430 fprintf(ofile, "%s\t{ %spatch%d_func, %d, %d, %d }", 431 cur_patch == STAILQ_FIRST(&patches) ? "" : ",\n", 432 prefix, 433 cur_patch->patch_func, cur_patch->begin, 434 cur_patch->skip_instr, cur_patch->skip_patch); 435 } 436 437 fprintf(ofile, "\n};\n\n"); 438 439 fprintf(ofile, 440 "static struct cs {\n" 441 " uint16_t begin;\n" 442 " uint16_t end;\n" 443 "} critical_sections[] = {\n"); 444 445 for (cs = TAILQ_FIRST(&cs_tailq); 446 cs != NULL; 447 cs = TAILQ_NEXT(cs, links)) { 448 fprintf(ofile, "%s\t{ %d, %d }", 449 cs == TAILQ_FIRST(&cs_tailq) ? "" : ",\n", 450 cs->begin_addr, cs->end_addr); 451 } 452 453 fprintf(ofile, "\n};\n\n"); 454 455 fprintf(ofile, 456 "static const int num_critical_sections = sizeof(critical_sections)\n" 457 " / sizeof(*critical_sections);\n"); 458 459 fprintf(stderr, "%s: %d instructions used\n", appname, instrcount); 460 } 461 462 static void 463 dump_scope(scope_t *scope) 464 { 465 scope_t *cur_scope; 466 467 /* 468 * Emit the first patch for this scope 469 */ 470 emit_patch(scope, 0); 471 472 /* 473 * Dump each scope within this one. 474 */ 475 cur_scope = TAILQ_FIRST(&scope->inner_scope); 476 477 while (cur_scope != NULL) { 478 dump_scope(cur_scope); 479 480 cur_scope = TAILQ_NEXT(cur_scope, scope_links); 481 } 482 483 /* 484 * Emit the second, closing, patch for this scope 485 */ 486 emit_patch(scope, 1); 487 } 488 489 void 490 emit_patch(scope_t *scope, int patch) 491 { 492 patch_info_t *pinfo; 493 patch_t *new_patch; 494 495 pinfo = &scope->patches[patch]; 496 497 if (pinfo->skip_instr == 0) 498 /* No-Op patch */ 499 return; 500 501 new_patch = (patch_t *)malloc(sizeof(*new_patch)); 502 503 if (new_patch == NULL) 504 stop("Could not malloc patch structure", EX_OSERR); 505 506 memset(new_patch, 0, sizeof(*new_patch)); 507 508 if (patch == 0) { 509 new_patch->patch_func = scope->func_num; 510 new_patch->begin = scope->begin_addr; 511 } else { 512 new_patch->patch_func = 0; 513 new_patch->begin = scope->end_addr; 514 } 515 new_patch->skip_instr = pinfo->skip_instr; 516 new_patch->skip_patch = pinfo->skip_patch; 517 STAILQ_INSERT_TAIL(&patches, new_patch, links); 518 } 519 520 void 521 output_listing(char *ifilename) 522 { 523 char buf[1024]; 524 FILE *ifile; 525 struct instruction *cur_instr; 526 patch_t *cur_patch; 527 symbol_node_t *cur_func; 528 int *func_values; 529 int instrcount; 530 int instrptr; 531 unsigned int line; 532 int func_count; 533 unsigned int skip_addr; 534 535 instrcount = 0; 536 instrptr = 0; 537 line = 1; 538 skip_addr = 0; 539 if ((ifile = fopen(ifilename, "r")) == NULL) { 540 perror(ifilename); 541 stop(NULL, EX_DATAERR); 542 } 543 544 /* 545 * Determine which options to apply to this listing. 546 */ 547 for (func_count = 0, cur_func = SLIST_FIRST(&patch_functions); 548 cur_func != NULL; 549 cur_func = SLIST_NEXT(cur_func, links)) 550 func_count++; 551 552 func_values = NULL; 553 if (func_count != 0) { 554 func_values = (int *)malloc(func_count * sizeof(int)); 555 556 if (func_values == NULL) 557 stop("Could not malloc", EX_OSERR); 558 559 func_values[0] = 0; /* FALSE func */ 560 func_count--; 561 562 /* 563 * Ask the user to fill in the return values for 564 * the rest of the functions. 565 */ 566 567 568 for (cur_func = SLIST_FIRST(&patch_functions); 569 cur_func != NULL && SLIST_NEXT(cur_func, links) != NULL; 570 cur_func = SLIST_NEXT(cur_func, links), func_count--) { 571 int input; 572 573 fprintf(stdout, "\n(%s)\n", cur_func->symbol->name); 574 fprintf(stdout, 575 "Enter the return value for " 576 "this expression[T/F]:"); 577 578 while (1) { 579 input = getchar(); 580 input = toupper(input); 581 582 if (input == 'T') { 583 func_values[func_count] = 1; 584 break; 585 } else if (input == 'F') { 586 func_values[func_count] = 0; 587 break; 588 } 589 } 590 if (isatty(fileno(stdin)) == 0) 591 putchar(input); 592 } 593 fprintf(stdout, "\nThanks!\n"); 594 } 595 596 /* Now output the listing */ 597 cur_patch = STAILQ_FIRST(&patches); 598 for (cur_instr = STAILQ_FIRST(&seq_program); 599 cur_instr != NULL; 600 cur_instr = STAILQ_NEXT(cur_instr, links), instrcount++) { 601 if (check_patch(&cur_patch, instrcount, 602 &skip_addr, func_values) == 0) { 603 /* Don't count this instruction as it is in a patch 604 * that was removed. 605 */ 606 continue; 607 } 608 609 while (line < cur_instr->srcline) { 610 fgets(buf, sizeof(buf), ifile); 611 fprintf(listfile, " \t%s", buf); 612 line++; 613 } 614 fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr, 615 #if BYTE_ORDER == LITTLE_ENDIAN 616 cur_instr->format.bytes[0], 617 cur_instr->format.bytes[1], 618 cur_instr->format.bytes[2], 619 cur_instr->format.bytes[3]); 620 #else 621 cur_instr->format.bytes[3], 622 cur_instr->format.bytes[2], 623 cur_instr->format.bytes[1], 624 cur_instr->format.bytes[0]); 625 #endif 626 /* 627 * Macro expansions can cause several instructions 628 * to be output for a single source line. Only 629 * advance the line once in these cases. 630 */ 631 if (line == cur_instr->srcline) { 632 fgets(buf, sizeof(buf), ifile); 633 fprintf(listfile, "\t%s", buf); 634 line++; 635 } else { 636 fprintf(listfile, "\n"); 637 } 638 instrptr++; 639 } 640 free(func_values); 641 642 /* Dump the remainder of the file */ 643 while(fgets(buf, sizeof(buf), ifile) != NULL) 644 fprintf(listfile, " %s", buf); 645 646 fclose(ifile); 647 } 648 649 static int 650 check_patch(patch_t **start_patch, unsigned int start_instr, 651 unsigned int *skip_addr, int *func_vals) 652 { 653 patch_t *cur_patch; 654 655 cur_patch = *start_patch; 656 657 while (cur_patch != NULL && start_instr == cur_patch->begin) { 658 if (func_vals[cur_patch->patch_func] == 0) { 659 int skip; 660 661 /* Start rejecting code */ 662 *skip_addr = start_instr + cur_patch->skip_instr; 663 for (skip = cur_patch->skip_patch; 664 skip > 0 && cur_patch != NULL; 665 skip--) 666 cur_patch = STAILQ_NEXT(cur_patch, links); 667 } else { 668 /* Accepted this patch. Advance to the next 669 * one and wait for our instruction pointer to 670 * hit this point. 671 */ 672 cur_patch = STAILQ_NEXT(cur_patch, links); 673 } 674 } 675 676 *start_patch = cur_patch; 677 if (start_instr < *skip_addr) 678 /* Still skipping */ 679 return (0); 680 681 return (1); 682 } 683 684 /* 685 * Print out error information if appropriate, and clean up before 686 * terminating the program. 687 */ 688 void 689 stop(const char *string, int err_code) 690 { 691 if (string != NULL) { 692 fprintf(stderr, "%s: ", appname); 693 if (yyfilename != NULL) { 694 fprintf(stderr, "Stopped at file %s, line %d - ", 695 yyfilename, yylineno); 696 } 697 fprintf(stderr, "%s\n", string); 698 } 699 700 if (ofile != NULL) { 701 fclose(ofile); 702 if (err_code != 0) { 703 fprintf(stderr, "%s: Removing %s due to error\n", 704 appname, ofilename); 705 unlink(ofilename); 706 } 707 } 708 709 if (regfile != NULL) { 710 fclose(regfile); 711 if (err_code != 0) { 712 fprintf(stderr, "%s: Removing %s due to error\n", 713 appname, regfilename); 714 unlink(regfilename); 715 } 716 } 717 718 if (listfile != NULL) { 719 fclose(listfile); 720 if (err_code != 0) { 721 fprintf(stderr, "%s: Removing %s due to error\n", 722 appname, listfilename); 723 unlink(listfilename); 724 } 725 } 726 727 symlist_free(&patch_functions); 728 symtable_close(); 729 730 exit(err_code); 731 } 732 733 struct instruction * 734 seq_alloc(void) 735 { 736 struct instruction *new_instr; 737 738 new_instr = (struct instruction *)malloc(sizeof(struct instruction)); 739 if (new_instr == NULL) 740 stop("Unable to malloc instruction object", EX_SOFTWARE); 741 memset(new_instr, 0, sizeof(*new_instr)); 742 STAILQ_INSERT_TAIL(&seq_program, new_instr, links); 743 new_instr->srcline = yylineno; 744 return new_instr; 745 } 746 747 critical_section_t * 748 cs_alloc(void) 749 { 750 critical_section_t *new_cs; 751 752 new_cs= (critical_section_t *)malloc(sizeof(critical_section_t)); 753 if (new_cs == NULL) 754 stop("Unable to malloc critical_section object", EX_SOFTWARE); 755 memset(new_cs, 0, sizeof(*new_cs)); 756 757 TAILQ_INSERT_TAIL(&cs_tailq, new_cs, links); 758 return new_cs; 759 } 760 761 scope_t * 762 scope_alloc(void) 763 { 764 scope_t *new_scope; 765 766 new_scope = (scope_t *)malloc(sizeof(scope_t)); 767 if (new_scope == NULL) 768 stop("Unable to malloc scope object", EX_SOFTWARE); 769 memset(new_scope, 0, sizeof(*new_scope)); 770 TAILQ_INIT(&new_scope->inner_scope); 771 772 if (SLIST_FIRST(&scope_stack) != NULL) { 773 TAILQ_INSERT_TAIL(&SLIST_FIRST(&scope_stack)->inner_scope, 774 new_scope, scope_links); 775 } 776 /* This patch is now the current scope */ 777 SLIST_INSERT_HEAD(&scope_stack, new_scope, scope_stack_links); 778 return new_scope; 779 } 780 781 void 782 process_scope(scope_t *scope) 783 { 784 /* 785 * We are "leaving" this scope. We should now have 786 * enough information to process the lists of scopes 787 * we encapsulate. 788 */ 789 scope_t *cur_scope; 790 u_int skip_patch_count; 791 u_int skip_instr_count; 792 793 cur_scope = TAILQ_LAST(&scope->inner_scope, scope_tailq); 794 skip_patch_count = 0; 795 skip_instr_count = 0; 796 while (cur_scope != NULL) { 797 u_int patch0_patch_skip; 798 799 patch0_patch_skip = 0; 800 switch (cur_scope->type) { 801 case SCOPE_IF: 802 case SCOPE_ELSE_IF: 803 if (skip_instr_count != 0) { 804 /* Create a tail patch */ 805 patch0_patch_skip++; 806 cur_scope->patches[1].skip_patch = 807 skip_patch_count + 1; 808 cur_scope->patches[1].skip_instr = 809 skip_instr_count; 810 } 811 812 /* Count Head patch */ 813 patch0_patch_skip++; 814 815 /* Count any patches contained in our inner scope */ 816 patch0_patch_skip += cur_scope->inner_scope_patches; 817 818 cur_scope->patches[0].skip_patch = patch0_patch_skip; 819 cur_scope->patches[0].skip_instr = 820 cur_scope->end_addr - cur_scope->begin_addr; 821 822 skip_instr_count += cur_scope->patches[0].skip_instr; 823 824 skip_patch_count += patch0_patch_skip; 825 if (cur_scope->type == SCOPE_IF) { 826 scope->inner_scope_patches += skip_patch_count; 827 skip_patch_count = 0; 828 skip_instr_count = 0; 829 } 830 break; 831 case SCOPE_ELSE: 832 /* Count any patches contained in our innter scope */ 833 skip_patch_count += cur_scope->inner_scope_patches; 834 835 skip_instr_count += cur_scope->end_addr 836 - cur_scope->begin_addr; 837 break; 838 case SCOPE_ROOT: 839 stop("Unexpected scope type encountered", EX_SOFTWARE); 840 /* NOTREACHED */ 841 } 842 843 cur_scope = TAILQ_PREV(cur_scope, scope_tailq, scope_links); 844 } 845 } 846