1 /*- 2 * Aic7xxx SCSI host adapter firmware asssembler 3 * 4 * Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs. 5 * Copyright (c) 2001, 2002 Adaptec Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 15 * substantially similar to the "NO WARRANTY" disclaimer below 16 * ("Disclaimer") and any redistribution must be conditioned upon 17 * including a substantially similar Disclaimer requirement for further 18 * binary redistribution. 19 * 3. Neither the names of the above-listed copyright holders nor the names 20 * of any contributors may be used to endorse or promote products derived 21 * from this software without specific prior written permission. 22 * 23 * Alternatively, this software may be distributed under the terms of the 24 * GNU General Public License ("GPL") version 2 as published by the Free 25 * Software Foundation. 26 * 27 * NO WARRANTY 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGES. 39 * 40 * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $ 41 * 42 * $FreeBSD$ 43 */ 44 #include <sys/types.h> 45 #include <sys/mman.h> 46 47 #include <ctype.h> 48 #include <inttypes.h> 49 #include <regex.h> 50 #include <stdio.h> 51 #include <stdlib.h> 52 #include <string.h> 53 #include <sysexits.h> 54 #include <unistd.h> 55 56 #if linux 57 #include <endian.h> 58 #else 59 #include <machine/endian.h> 60 #endif 61 62 #include "aicasm.h" 63 #include "aicasm_symbol.h" 64 #include "aicasm_insformat.h" 65 66 typedef struct patch { 67 STAILQ_ENTRY(patch) links; 68 int patch_func; 69 u_int begin; 70 u_int skip_instr; 71 u_int skip_patch; 72 } patch_t; 73 74 STAILQ_HEAD(patch_list, patch) patches; 75 76 static void usage(void); 77 static void back_patch(void); 78 static void output_code(void); 79 static void output_listing(char *ifilename); 80 static void dump_scope(scope_t *scope); 81 static void emit_patch(scope_t *scope, int patch); 82 static int check_patch(patch_t **start_patch, unsigned int start_instr, 83 unsigned int *skip_addr, int *func_vals); 84 85 struct path_list search_path; 86 int includes_search_curdir; 87 char *appname; 88 char *stock_include_file; 89 FILE *ofile; 90 char *ofilename; 91 char *regfilename; 92 FILE *regfile; 93 char *listfilename; 94 FILE *listfile; 95 char *regdiagfilename; 96 FILE *regdiagfile; 97 int src_mode; 98 int dst_mode; 99 100 static STAILQ_HEAD(,instruction) seq_program; 101 struct cs_tailq cs_tailq; 102 struct scope_list scope_stack; 103 symlist_t patch_functions; 104 105 #if DEBUG 106 extern int yy_flex_debug; 107 extern int mm_flex_debug; 108 extern int yydebug; 109 extern int mmdebug; 110 #endif 111 extern FILE *yyin; 112 extern int yyparse(void); 113 114 int main(int argc, char *argv[]); 115 116 int 117 main(int argc, char *argv[]) 118 { 119 int ch; 120 int retval; 121 char *inputfilename; 122 scope_t *sentinal; 123 124 STAILQ_INIT(&patches); 125 SLIST_INIT(&search_path); 126 STAILQ_INIT(&seq_program); 127 TAILQ_INIT(&cs_tailq); 128 SLIST_INIT(&scope_stack); 129 130 /* Set Sentinal scope node */ 131 sentinal = scope_alloc(); 132 sentinal->type = SCOPE_ROOT; 133 134 includes_search_curdir = 1; 135 appname = *argv; 136 regfile = NULL; 137 listfile = NULL; 138 #if DEBUG 139 yy_flex_debug = 0; 140 mm_flex_debug = 0; 141 yydebug = 0; 142 mmdebug = 0; 143 #endif 144 while ((ch = getopt(argc, argv, "d:i:l:n:o:p:r:I:X")) != -1) { 145 switch(ch) { 146 case 'd': 147 #if DEBUG 148 if (strcmp(optarg, "s") == 0) { 149 yy_flex_debug = 1; 150 mm_flex_debug = 1; 151 } else if (strcmp(optarg, "p") == 0) { 152 yydebug = 1; 153 mmdebug = 1; 154 } else { 155 fprintf(stderr, "%s: -d Requires either an " 156 "'s' or 'p' argument\n", appname); 157 usage(); 158 } 159 #else 160 stop("-d: Assembler not built with debugging " 161 "information", EX_SOFTWARE); 162 #endif 163 break; 164 case 'i': 165 stock_include_file = optarg; 166 break; 167 case 'l': 168 /* Create a program listing */ 169 if ((listfile = fopen(optarg, "w")) == NULL) { 170 perror(optarg); 171 stop(NULL, EX_CANTCREAT); 172 } 173 listfilename = optarg; 174 break; 175 case 'n': 176 /* Don't complain about the -nostdinc directrive */ 177 if (strcmp(optarg, "ostdinc")) { 178 fprintf(stderr, "%s: Unknown option -%c%s\n", 179 appname, ch, optarg); 180 usage(); 181 /* NOTREACHED */ 182 } 183 break; 184 case 'o': 185 if ((ofile = fopen(optarg, "w")) == NULL) { 186 perror(optarg); 187 stop(NULL, EX_CANTCREAT); 188 } 189 ofilename = optarg; 190 break; 191 case 'p': 192 /* Create Register Diagnostic "printing" Functions */ 193 if ((regdiagfile = fopen(optarg, "w")) == NULL) { 194 perror(optarg); 195 stop(NULL, EX_CANTCREAT); 196 } 197 regdiagfilename = optarg; 198 break; 199 case 'r': 200 if ((regfile = fopen(optarg, "w")) == NULL) { 201 perror(optarg); 202 stop(NULL, EX_CANTCREAT); 203 } 204 regfilename = optarg; 205 break; 206 case 'I': 207 { 208 path_entry_t include_dir; 209 210 if (strcmp(optarg, "-") == 0) { 211 if (includes_search_curdir == 0) { 212 fprintf(stderr, "%s: Warning - '-I-' " 213 "specified multiple " 214 "times\n", appname); 215 } 216 includes_search_curdir = 0; 217 for (include_dir = SLIST_FIRST(&search_path); 218 include_dir != NULL; 219 include_dir = SLIST_NEXT(include_dir, 220 links)) 221 /* 222 * All entries before a '-I-' only 223 * apply to includes specified with 224 * quotes instead of "<>". 225 */ 226 include_dir->quoted_includes_only = 1; 227 } else { 228 include_dir = 229 (path_entry_t)malloc(sizeof(*include_dir)); 230 if (include_dir == NULL) { 231 perror(optarg); 232 stop(NULL, EX_OSERR); 233 } 234 include_dir->directory = strdup(optarg); 235 if (include_dir->directory == NULL) { 236 perror(optarg); 237 stop(NULL, EX_OSERR); 238 } 239 include_dir->quoted_includes_only = 0; 240 SLIST_INSERT_HEAD(&search_path, include_dir, 241 links); 242 } 243 break; 244 } 245 case 'X': 246 /* icc version of -nostdinc */ 247 break; 248 case '?': 249 default: 250 usage(); 251 /* NOTREACHED */ 252 } 253 } 254 argc -= optind; 255 argv += optind; 256 257 if (argc != 1) { 258 fprintf(stderr, "%s: No input file specifiled\n", appname); 259 usage(); 260 /* NOTREACHED */ 261 } 262 263 if (regdiagfile != NULL 264 && (regfile == NULL || stock_include_file == NULL)) { 265 fprintf(stderr, 266 "%s: The -p option requires the -r and -i options.\n", 267 appname); 268 usage(); 269 /* NOTREACHED */ 270 } 271 symtable_open(); 272 inputfilename = *argv; 273 include_file(*argv, SOURCE_FILE); 274 retval = yyparse(); 275 if (retval == 0) { 276 if (SLIST_FIRST(&scope_stack) == NULL 277 || SLIST_FIRST(&scope_stack)->type != SCOPE_ROOT) { 278 stop("Unterminated conditional expression", EX_DATAERR); 279 /* NOTREACHED */ 280 } 281 282 /* Process outmost scope */ 283 process_scope(SLIST_FIRST(&scope_stack)); 284 /* 285 * Decend the tree of scopes and insert/emit 286 * patches as appropriate. We perform a depth first 287 * tranversal, recursively handling each scope. 288 */ 289 /* start at the root scope */ 290 dump_scope(SLIST_FIRST(&scope_stack)); 291 292 /* Patch up forward jump addresses */ 293 back_patch(); 294 295 if (ofile != NULL) 296 output_code(); 297 if (regfile != NULL) 298 symtable_dump(regfile, regdiagfile); 299 if (listfile != NULL) 300 output_listing(inputfilename); 301 } 302 303 stop(NULL, 0); 304 /* NOTREACHED */ 305 return (0); 306 } 307 308 static void 309 usage() 310 { 311 312 (void)fprintf(stderr, 313 "usage: %-16s [-nostdinc|-X] [-I-] [-I directory] [-o output_file]\n" 314 " [-r register_output_file [-p register_diag_file -i includefile]]\n" 315 " [-l program_list_file]\n" 316 " input_file\n", appname); 317 exit(EX_USAGE); 318 } 319 320 static void 321 back_patch() 322 { 323 struct instruction *cur_instr; 324 325 for (cur_instr = STAILQ_FIRST(&seq_program); 326 cur_instr != NULL; 327 cur_instr = STAILQ_NEXT(cur_instr, links)) { 328 if (cur_instr->patch_label != NULL) { 329 struct ins_format3 *f3_instr; 330 u_int address; 331 332 if (cur_instr->patch_label->type != LABEL) { 333 char buf[255]; 334 335 snprintf(buf, sizeof(buf), 336 "Undefined label %s", 337 cur_instr->patch_label->name); 338 stop(buf, EX_DATAERR); 339 /* NOTREACHED */ 340 } 341 f3_instr = &cur_instr->format.format3; 342 address = f3_instr->address; 343 address += cur_instr->patch_label->info.linfo->address; 344 f3_instr->address = address; 345 } 346 } 347 } 348 349 static void 350 output_code() 351 { 352 struct instruction *cur_instr; 353 patch_t *cur_patch; 354 critical_section_t *cs; 355 symbol_node_t *cur_node; 356 int instrcount; 357 358 instrcount = 0; 359 fprintf(ofile, 360 "/*\n" 361 " * DO NOT EDIT - This file is automatically generated\n" 362 " * from the following source files:\n" 363 " *\n" 364 "%s */\n", versions); 365 366 fprintf(ofile, "static uint8_t seqprog[] = {\n"); 367 for (cur_instr = STAILQ_FIRST(&seq_program); 368 cur_instr != NULL; 369 cur_instr = STAILQ_NEXT(cur_instr, links)) { 370 371 fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x", 372 cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n", 373 #if BYTE_ORDER == LITTLE_ENDIAN 374 cur_instr->format.bytes[0], 375 cur_instr->format.bytes[1], 376 cur_instr->format.bytes[2], 377 cur_instr->format.bytes[3]); 378 #else 379 cur_instr->format.bytes[3], 380 cur_instr->format.bytes[2], 381 cur_instr->format.bytes[1], 382 cur_instr->format.bytes[0]); 383 #endif 384 instrcount++; 385 } 386 fprintf(ofile, "\n};\n\n"); 387 388 if (patch_arg_list == NULL) 389 stop("Patch argument list not defined", 390 EX_DATAERR); 391 392 /* 393 * Output patch information. Patch functions first. 394 */ 395 fprintf(ofile, 396 "typedef int %spatch_func_t (%s);\n", prefix, patch_arg_list); 397 398 for (cur_node = SLIST_FIRST(&patch_functions); 399 cur_node != NULL; 400 cur_node = SLIST_NEXT(cur_node,links)) { 401 fprintf(ofile, 402 "static %spatch_func_t %spatch%d_func;\n" 403 "\n" 404 "static int\n" 405 "%spatch%d_func(%s)\n" 406 "{\n" 407 " return (%s);\n" 408 "}\n\n", 409 prefix, 410 prefix, 411 cur_node->symbol->info.condinfo->func_num, 412 prefix, 413 cur_node->symbol->info.condinfo->func_num, 414 patch_arg_list, 415 cur_node->symbol->name); 416 } 417 418 fprintf(ofile, 419 "static struct patch {\n" 420 " %spatch_func_t *patch_func;\n" 421 " uint32_t begin :10,\n" 422 " skip_instr :10,\n" 423 " skip_patch :12;\n" 424 "} patches[] = {\n", prefix); 425 426 for (cur_patch = STAILQ_FIRST(&patches); 427 cur_patch != NULL; 428 cur_patch = STAILQ_NEXT(cur_patch,links)) { 429 fprintf(ofile, "%s\t{ %spatch%d_func, %d, %d, %d }", 430 cur_patch == STAILQ_FIRST(&patches) ? "" : ",\n", 431 prefix, 432 cur_patch->patch_func, cur_patch->begin, 433 cur_patch->skip_instr, cur_patch->skip_patch); 434 } 435 436 fprintf(ofile, "\n};\n\n"); 437 438 fprintf(ofile, 439 "static struct cs {\n" 440 " uint16_t begin;\n" 441 " uint16_t end;\n" 442 "} critical_sections[] = {\n"); 443 444 for (cs = TAILQ_FIRST(&cs_tailq); 445 cs != NULL; 446 cs = TAILQ_NEXT(cs, links)) { 447 fprintf(ofile, "%s\t{ %d, %d }", 448 cs == TAILQ_FIRST(&cs_tailq) ? "" : ",\n", 449 cs->begin_addr, cs->end_addr); 450 } 451 452 fprintf(ofile, "\n};\n\n"); 453 454 fprintf(ofile, 455 "static const int num_critical_sections = sizeof(critical_sections)\n" 456 " / sizeof(*critical_sections);\n"); 457 458 fprintf(stderr, "%s: %d instructions used\n", appname, instrcount); 459 } 460 461 static void 462 dump_scope(scope_t *scope) 463 { 464 scope_t *cur_scope; 465 466 /* 467 * Emit the first patch for this scope 468 */ 469 emit_patch(scope, 0); 470 471 /* 472 * Dump each scope within this one. 473 */ 474 cur_scope = TAILQ_FIRST(&scope->inner_scope); 475 476 while (cur_scope != NULL) { 477 478 dump_scope(cur_scope); 479 480 cur_scope = TAILQ_NEXT(cur_scope, scope_links); 481 } 482 483 /* 484 * Emit the second, closing, patch for this scope 485 */ 486 emit_patch(scope, 1); 487 } 488 489 void 490 emit_patch(scope_t *scope, int patch) 491 { 492 patch_info_t *pinfo; 493 patch_t *new_patch; 494 495 pinfo = &scope->patches[patch]; 496 497 if (pinfo->skip_instr == 0) 498 /* No-Op patch */ 499 return; 500 501 new_patch = (patch_t *)malloc(sizeof(*new_patch)); 502 503 if (new_patch == NULL) 504 stop("Could not malloc patch structure", EX_OSERR); 505 506 memset(new_patch, 0, sizeof(*new_patch)); 507 508 if (patch == 0) { 509 new_patch->patch_func = scope->func_num; 510 new_patch->begin = scope->begin_addr; 511 } else { 512 new_patch->patch_func = 0; 513 new_patch->begin = scope->end_addr; 514 } 515 new_patch->skip_instr = pinfo->skip_instr; 516 new_patch->skip_patch = pinfo->skip_patch; 517 STAILQ_INSERT_TAIL(&patches, new_patch, links); 518 } 519 520 void 521 output_listing(char *ifilename) 522 { 523 char buf[1024]; 524 FILE *ifile; 525 struct instruction *cur_instr; 526 patch_t *cur_patch; 527 symbol_node_t *cur_func; 528 int *func_values; 529 int instrcount; 530 int instrptr; 531 unsigned int line; 532 int func_count; 533 int skip_addr; 534 535 instrcount = 0; 536 instrptr = 0; 537 line = 1; 538 skip_addr = 0; 539 if ((ifile = fopen(ifilename, "r")) == NULL) { 540 perror(ifilename); 541 stop(NULL, EX_DATAERR); 542 } 543 544 /* 545 * Determine which options to apply to this listing. 546 */ 547 for (func_count = 0, cur_func = SLIST_FIRST(&patch_functions); 548 cur_func != NULL; 549 cur_func = SLIST_NEXT(cur_func, links)) 550 func_count++; 551 552 func_values = NULL; 553 if (func_count != 0) { 554 func_values = (int *)malloc(func_count * sizeof(int)); 555 556 if (func_values == NULL) 557 stop("Could not malloc", EX_OSERR); 558 559 func_values[0] = 0; /* FALSE func */ 560 func_count--; 561 562 /* 563 * Ask the user to fill in the return values for 564 * the rest of the functions. 565 */ 566 567 568 for (cur_func = SLIST_FIRST(&patch_functions); 569 cur_func != NULL && SLIST_NEXT(cur_func, links) != NULL; 570 cur_func = SLIST_NEXT(cur_func, links), func_count--) { 571 int input; 572 573 fprintf(stdout, "\n(%s)\n", cur_func->symbol->name); 574 fprintf(stdout, 575 "Enter the return value for " 576 "this expression[T/F]:"); 577 578 while (1) { 579 580 input = getchar(); 581 input = toupper(input); 582 583 if (input == 'T') { 584 func_values[func_count] = 1; 585 break; 586 } else if (input == 'F') { 587 func_values[func_count] = 0; 588 break; 589 } 590 } 591 if (isatty(fileno(stdin)) == 0) 592 putchar(input); 593 } 594 fprintf(stdout, "\nThanks!\n"); 595 } 596 597 /* Now output the listing */ 598 cur_patch = STAILQ_FIRST(&patches); 599 for (cur_instr = STAILQ_FIRST(&seq_program); 600 cur_instr != NULL; 601 cur_instr = STAILQ_NEXT(cur_instr, links), instrcount++) { 602 603 if (check_patch(&cur_patch, instrcount, 604 &skip_addr, func_values) == 0) { 605 /* Don't count this instruction as it is in a patch 606 * that was removed. 607 */ 608 continue; 609 } 610 611 while (line < cur_instr->srcline) { 612 fgets(buf, sizeof(buf), ifile); 613 fprintf(listfile, " \t%s", buf); 614 line++; 615 } 616 fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr, 617 #if BYTE_ORDER == LITTLE_ENDIAN 618 cur_instr->format.bytes[0], 619 cur_instr->format.bytes[1], 620 cur_instr->format.bytes[2], 621 cur_instr->format.bytes[3]); 622 #else 623 cur_instr->format.bytes[3], 624 cur_instr->format.bytes[2], 625 cur_instr->format.bytes[1], 626 cur_instr->format.bytes[0]); 627 #endif 628 /* 629 * Macro expansions can cause several instructions 630 * to be output for a single source line. Only 631 * advance the line once in these cases. 632 */ 633 if (line == cur_instr->srcline) { 634 fgets(buf, sizeof(buf), ifile); 635 fprintf(listfile, "\t%s", buf); 636 line++; 637 } else { 638 fprintf(listfile, "\n"); 639 } 640 instrptr++; 641 } 642 /* Dump the remainder of the file */ 643 while(fgets(buf, sizeof(buf), ifile) != NULL) 644 fprintf(listfile, " %s", buf); 645 646 fclose(ifile); 647 } 648 649 static int 650 check_patch(patch_t **start_patch, unsigned int start_instr, 651 unsigned int *skip_addr, int *func_vals) 652 { 653 patch_t *cur_patch; 654 655 cur_patch = *start_patch; 656 657 while (cur_patch != NULL && start_instr == cur_patch->begin) { 658 if (func_vals[cur_patch->patch_func] == 0) { 659 int skip; 660 661 /* Start rejecting code */ 662 *skip_addr = start_instr + cur_patch->skip_instr; 663 for (skip = cur_patch->skip_patch; 664 skip > 0 && cur_patch != NULL; 665 skip--) 666 cur_patch = STAILQ_NEXT(cur_patch, links); 667 } else { 668 /* Accepted this patch. Advance to the next 669 * one and wait for our intruction pointer to 670 * hit this point. 671 */ 672 cur_patch = STAILQ_NEXT(cur_patch, links); 673 } 674 } 675 676 *start_patch = cur_patch; 677 if (start_instr < *skip_addr) 678 /* Still skipping */ 679 return (0); 680 681 return (1); 682 } 683 684 /* 685 * Print out error information if appropriate, and clean up before 686 * terminating the program. 687 */ 688 void 689 stop(const char *string, int err_code) 690 { 691 if (string != NULL) { 692 fprintf(stderr, "%s: ", appname); 693 if (yyfilename != NULL) { 694 fprintf(stderr, "Stopped at file %s, line %d - ", 695 yyfilename, yylineno); 696 } 697 fprintf(stderr, "%s\n", string); 698 } 699 700 if (ofile != NULL) { 701 fclose(ofile); 702 if (err_code != 0) { 703 fprintf(stderr, "%s: Removing %s due to error\n", 704 appname, ofilename); 705 unlink(ofilename); 706 } 707 } 708 709 if (regfile != NULL) { 710 fclose(regfile); 711 if (err_code != 0) { 712 fprintf(stderr, "%s: Removing %s due to error\n", 713 appname, regfilename); 714 unlink(regfilename); 715 } 716 } 717 718 if (listfile != NULL) { 719 fclose(listfile); 720 if (err_code != 0) { 721 fprintf(stderr, "%s: Removing %s due to error\n", 722 appname, listfilename); 723 unlink(listfilename); 724 } 725 } 726 727 symlist_free(&patch_functions); 728 symtable_close(); 729 730 exit(err_code); 731 } 732 733 struct instruction * 734 seq_alloc() 735 { 736 struct instruction *new_instr; 737 738 new_instr = (struct instruction *)malloc(sizeof(struct instruction)); 739 if (new_instr == NULL) 740 stop("Unable to malloc instruction object", EX_SOFTWARE); 741 memset(new_instr, 0, sizeof(*new_instr)); 742 STAILQ_INSERT_TAIL(&seq_program, new_instr, links); 743 new_instr->srcline = yylineno; 744 return new_instr; 745 } 746 747 critical_section_t * 748 cs_alloc() 749 { 750 critical_section_t *new_cs; 751 752 new_cs= (critical_section_t *)malloc(sizeof(critical_section_t)); 753 if (new_cs == NULL) 754 stop("Unable to malloc critical_section object", EX_SOFTWARE); 755 memset(new_cs, 0, sizeof(*new_cs)); 756 757 TAILQ_INSERT_TAIL(&cs_tailq, new_cs, links); 758 return new_cs; 759 } 760 761 scope_t * 762 scope_alloc() 763 { 764 scope_t *new_scope; 765 766 new_scope = (scope_t *)malloc(sizeof(scope_t)); 767 if (new_scope == NULL) 768 stop("Unable to malloc scope object", EX_SOFTWARE); 769 memset(new_scope, 0, sizeof(*new_scope)); 770 TAILQ_INIT(&new_scope->inner_scope); 771 772 if (SLIST_FIRST(&scope_stack) != NULL) { 773 TAILQ_INSERT_TAIL(&SLIST_FIRST(&scope_stack)->inner_scope, 774 new_scope, scope_links); 775 } 776 /* This patch is now the current scope */ 777 SLIST_INSERT_HEAD(&scope_stack, new_scope, scope_stack_links); 778 return new_scope; 779 } 780 781 void 782 process_scope(scope_t *scope) 783 { 784 /* 785 * We are "leaving" this scope. We should now have 786 * enough information to process the lists of scopes 787 * we encapsulate. 788 */ 789 scope_t *cur_scope; 790 u_int skip_patch_count; 791 u_int skip_instr_count; 792 793 cur_scope = TAILQ_LAST(&scope->inner_scope, scope_tailq); 794 skip_patch_count = 0; 795 skip_instr_count = 0; 796 while (cur_scope != NULL) { 797 u_int patch0_patch_skip; 798 799 patch0_patch_skip = 0; 800 switch (cur_scope->type) { 801 case SCOPE_IF: 802 case SCOPE_ELSE_IF: 803 if (skip_instr_count != 0) { 804 /* Create a tail patch */ 805 patch0_patch_skip++; 806 cur_scope->patches[1].skip_patch = 807 skip_patch_count + 1; 808 cur_scope->patches[1].skip_instr = 809 skip_instr_count; 810 } 811 812 /* Count Head patch */ 813 patch0_patch_skip++; 814 815 /* Count any patches contained in our inner scope */ 816 patch0_patch_skip += cur_scope->inner_scope_patches; 817 818 cur_scope->patches[0].skip_patch = patch0_patch_skip; 819 cur_scope->patches[0].skip_instr = 820 cur_scope->end_addr - cur_scope->begin_addr; 821 822 skip_instr_count += cur_scope->patches[0].skip_instr; 823 824 skip_patch_count += patch0_patch_skip; 825 if (cur_scope->type == SCOPE_IF) { 826 scope->inner_scope_patches += skip_patch_count; 827 skip_patch_count = 0; 828 skip_instr_count = 0; 829 } 830 break; 831 case SCOPE_ELSE: 832 /* Count any patches contained in our innter scope */ 833 skip_patch_count += cur_scope->inner_scope_patches; 834 835 skip_instr_count += cur_scope->end_addr 836 - cur_scope->begin_addr; 837 break; 838 case SCOPE_ROOT: 839 stop("Unexpected scope type encountered", EX_SOFTWARE); 840 /* NOTREACHED */ 841 } 842 843 cur_scope = TAILQ_PREV(cur_scope, scope_tailq, scope_links); 844 } 845 } 846