1/*- 2 * Aic79xx register and scratch ram definitions. 3 * 4 * Copyright (c) 1994-2001, 2004 Justin T. Gibbs. 5 * Copyright (c) 2000-2002 Adaptec Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 15 * substantially similar to the "NO WARRANTY" disclaimer below 16 * ("Disclaimer") and any redistribution must be conditioned upon 17 * including a substantially similar Disclaimer requirement for further 18 * binary redistribution. 19 * 3. Neither the names of the above-listed copyright holders nor the names 20 * of any contributors may be used to endorse or promote products derived 21 * from this software without specific prior written permission. 22 * 23 * Alternatively, this software may be distributed under the terms of the 24 * GNU General Public License ("GPL") version 2 as published by the Free 25 * Software Foundation. 26 * 27 * NO WARRANTY 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGES. 39 * 40 * $FreeBSD$ 41 */ 42VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#76 $" 43 44/* 45 * This file is processed by the aic7xxx_asm utility for use in assembling 46 * firmware for the aic79xx family of SCSI host adapters as well as to generate 47 * a C header file for use in the kernel portion of the Aic79xx driver. 48 */ 49 50/* Register window Modes */ 51#define M_DFF0 0 52#define M_DFF1 1 53#define M_CCHAN 2 54#define M_SCSI 3 55#define M_CFG 4 56#define M_DST_SHIFT 4 57 58#define MK_MODE(src, dst) ((src) | ((dst) << M_DST_SHIFT)) 59#define SET_MODE(src, dst) \ 60 SET_SRC_MODE src; \ 61 SET_DST_MODE dst; \ 62 if ((ahd->bugs & AHD_SET_MODE_BUG) != 0) { \ 63 mvi MK_MODE(src, dst) call set_mode_work_around; \ 64 } else { \ 65 mvi MODE_PTR, MK_MODE(src, dst); \ 66 } 67 68#define RESTORE_MODE(mode) \ 69 if ((ahd->bugs & AHD_SET_MODE_BUG) != 0) { \ 70 mov mode call set_mode_work_around; \ 71 } else { \ 72 mov MODE_PTR, mode; \ 73 } 74 75#define SET_SEQINTCODE(code) \ 76 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) { \ 77 mvi code call set_seqint_work_around; \ 78 } else { \ 79 mvi SEQINTCODE, code; \ 80 } 81 82/* 83 * Mode Pointer 84 * Controls which of the 5, 512byte, address spaces should be used 85 * as the source and destination of any register accesses in our 86 * register window. 87 */ 88register MODE_PTR { 89 address 0x000 90 access_mode RW 91 field DST_MODE 0x70 92 field SRC_MODE 0x07 93 mode_pointer 94} 95 96const SRC_MODE_SHIFT 0 97const DST_MODE_SHIFT 4 98 99/* 100 * Host Interrupt Status 101 */ 102register INTSTAT { 103 address 0x001 104 access_mode RW 105 field HWERRINT 0x80 106 field BRKADRINT 0x40 107 field SWTMINT 0x20 108 field PCIINT 0x10 109 field SCSIINT 0x08 110 field SEQINT 0x04 111 field CMDCMPLT 0x02 112 field SPLTINT 0x01 113 mask INT_PEND 0xFF 114} 115 116/* 117 * Sequencer Interrupt Code 118 */ 119register SEQINTCODE { 120 address 0x002 121 access_mode RW 122 field { 123 NO_SEQINT, /* No seqint pending. */ 124 BAD_PHASE, /* unknown scsi bus phase */ 125 SEND_REJECT, /* sending a message reject */ 126 PROTO_VIOLATION, /* Protocol Violation */ 127 NO_MATCH, /* no cmd match for reconnect */ 128 IGN_WIDE_RES, /* Complex IGN Wide Res Msg */ 129 PDATA_REINIT, /* 130 * Returned to data phase 131 * that requires data 132 * transfer pointers to be 133 * recalculated from the 134 * transfer residual. 135 */ 136 HOST_MSG_LOOP, /* 137 * The bus is ready for the 138 * host to perform another 139 * message transaction. This 140 * mechanism is used for things 141 * like sync/wide negotiation 142 * that require a kernel based 143 * message state engine. 144 */ 145 BAD_STATUS, /* Bad status from target */ 146 DATA_OVERRUN, /* 147 * Target attempted to write 148 * beyond the bounds of its 149 * command. 150 */ 151 MKMSG_FAILED, /* 152 * Target completed command 153 * without honoring our ATN 154 * request to issue a message. 155 */ 156 MISSED_BUSFREE, /* 157 * The sequencer never saw 158 * the bus go free after 159 * either a command complete 160 * or disconnect message. 161 */ 162 DUMP_CARD_STATE, 163 ILLEGAL_PHASE, 164 INVALID_SEQINT, 165 CFG4ISTAT_INTR, 166 STATUS_OVERRUN, 167 CFG4OVERRUN, 168 ENTERING_NONPACK, 169 TASKMGMT_FUNC_COMPLETE, /* 170 * Task management function 171 * request completed with 172 * an expected busfree. 173 */ 174 TASKMGMT_CMD_CMPLT_OKAY, /* 175 * A command with a non-zero 176 * task management function 177 * has completed via the normal 178 * command completion method 179 * for commands with a zero 180 * task management function. 181 * This happens when an attempt 182 * to abort a command loses 183 * the race for the command to 184 * complete normally. 185 */ 186 TRACEPOINT0, 187 TRACEPOINT1, 188 TRACEPOINT2, 189 TRACEPOINT3, 190 SAW_HWERR, 191 BAD_SCB_STATUS 192 } 193} 194 195/* 196 * Clear Host Interrupt 197 */ 198register CLRINT { 199 address 0x003 200 access_mode WO 201 field CLRHWERRINT 0x80 /* Rev B or greater */ 202 field CLRBRKADRINT 0x40 203 field CLRSWTMINT 0x20 204 field CLRPCIINT 0x10 205 field CLRSCSIINT 0x08 206 field CLRSEQINT 0x04 207 field CLRCMDINT 0x02 208 field CLRSPLTINT 0x01 209} 210 211/* 212 * Error Register 213 */ 214register ERROR { 215 address 0x004 216 access_mode RO 217 field CIOPARERR 0x80 218 field CIOACCESFAIL 0x40 /* Rev B or greater */ 219 field MPARERR 0x20 220 field DPARERR 0x10 221 field SQPARERR 0x08 222 field ILLOPCODE 0x04 223 field DSCTMOUT 0x02 224} 225 226/* 227 * Clear Error 228 */ 229register CLRERR { 230 address 0x004 231 access_mode WO 232 field CLRCIOPARERR 0x80 233 field CLRCIOACCESFAIL 0x40 /* Rev B or greater */ 234 field CLRMPARERR 0x20 235 field CLRDPARERR 0x10 236 field CLRSQPARERR 0x08 237 field CLRILLOPCODE 0x04 238 field CLRDSCTMOUT 0x02 239} 240 241/* 242 * Host Control Register 243 * Overall host control of the device. 244 */ 245register HCNTRL { 246 address 0x005 247 access_mode RW 248 field SEQ_RESET 0x80 /* Rev B or greater */ 249 field POWRDN 0x40 250 field SWINT 0x10 251 field SWTIMER_START_B 0x08 /* Rev B or greater */ 252 field PAUSE 0x04 253 field INTEN 0x02 254 field CHIPRST 0x01 255 field CHIPRSTACK 0x01 256} 257 258/* 259 * Host New SCB Queue Offset 260 */ 261register HNSCB_QOFF { 262 address 0x006 263 access_mode RW 264 size 2 265} 266 267/* 268 * Host Empty SCB Queue Offset 269 */ 270register HESCB_QOFF { 271 address 0x008 272 access_mode RW 273} 274 275/* 276 * Host Mailbox 277 */ 278register HS_MAILBOX { 279 address 0x00B 280 access_mode RW 281 mask HOST_TQINPOS 0x80 /* Boundary at either 0 or 128 */ 282 mask ENINT_COALESCE 0x40 /* Perform interrupt coalescing */ 283} 284 285/* 286 * Sequencer Interrupt Status 287 */ 288register SEQINTSTAT { 289 address 0x00C 290 access_mode RO 291 field SEQ_SWTMRTO 0x10 292 field SEQ_SEQINT 0x08 293 field SEQ_SCSIINT 0x04 294 field SEQ_PCIINT 0x02 295 field SEQ_SPLTINT 0x01 296} 297 298/* 299 * Clear SEQ Interrupt 300 */ 301register CLRSEQINTSTAT { 302 address 0x00C 303 access_mode WO 304 field CLRSEQ_SWTMRTO 0x10 305 field CLRSEQ_SEQINT 0x08 306 field CLRSEQ_SCSIINT 0x04 307 field CLRSEQ_PCIINT 0x02 308 field CLRSEQ_SPLTINT 0x01 309} 310 311/* 312 * Software Timer 313 */ 314register SWTIMER { 315 address 0x00E 316 access_mode RW 317 size 2 318} 319 320/* 321 * SEQ New SCB Queue Offset 322 */ 323register SNSCB_QOFF { 324 address 0x010 325 access_mode RW 326 size 2 327 modes M_CCHAN 328} 329 330/* 331 * SEQ Empty SCB Queue Offset 332 */ 333register SESCB_QOFF { 334 address 0x012 335 access_mode RW 336 modes M_CCHAN 337} 338 339/* 340 * SEQ Done SCB Queue Offset 341 */ 342register SDSCB_QOFF { 343 address 0x014 344 access_mode RW 345 modes M_CCHAN 346 size 2 347} 348 349/* 350 * Queue Offset Control & Status 351 */ 352register QOFF_CTLSTA { 353 address 0x016 354 access_mode RW 355 modes M_CCHAN 356 field EMPTY_SCB_AVAIL 0x80 357 field NEW_SCB_AVAIL 0x40 358 field SDSCB_ROLLOVR 0x20 359 field HS_MAILBOX_ACT 0x10 360 field SCB_QSIZE 0x0F { 361 SCB_QSIZE_4, 362 SCB_QSIZE_8, 363 SCB_QSIZE_16, 364 SCB_QSIZE_32, 365 SCB_QSIZE_64, 366 SCB_QSIZE_128, 367 SCB_QSIZE_256, 368 SCB_QSIZE_512, 369 SCB_QSIZE_1024, 370 SCB_QSIZE_2048, 371 SCB_QSIZE_4096, 372 SCB_QSIZE_8192, 373 SCB_QSIZE_16384 374 } 375} 376 377/* 378 * Interrupt Control 379 */ 380register INTCTL { 381 address 0x018 382 access_mode RW 383 field SWTMINTMASK 0x80 384 field SWTMINTEN 0x40 385 field SWTIMER_START 0x20 386 field AUTOCLRCMDINT 0x10 387 field PCIINTEN 0x08 388 field SCSIINTEN 0x04 389 field SEQINTEN 0x02 390 field SPLTINTEN 0x01 391} 392 393/* 394 * Data FIFO Control 395 */ 396register DFCNTRL { 397 address 0x019 398 access_mode RW 399 modes M_DFF0, M_DFF1 400 field PRELOADEN 0x80 401 field SCSIENWRDIS 0x40 /* Rev B only. */ 402 field SCSIEN 0x20 403 field SCSIENACK 0x20 404 field HDMAEN 0x08 405 field HDMAENACK 0x08 406 field DIRECTION 0x04 407 field DIRECTIONACK 0x04 408 field FIFOFLUSH 0x02 409 field FIFOFLUSHACK 0x02 410 field DIRECTIONEN 0x01 411} 412 413/* 414 * Device Space Command 0 415 */ 416register DSCOMMAND0 { 417 address 0x019 418 access_mode RW 419 modes M_CFG 420 field CACHETHEN 0x80 /* Cache Threshold enable */ 421 field DPARCKEN 0x40 /* Data Parity Check Enable */ 422 field MPARCKEN 0x20 /* Memory Parity Check Enable */ 423 field EXTREQLCK 0x10 /* External Request Lock */ 424 field DISABLE_TWATE 0x02 /* Rev B or greater */ 425 field CIOPARCKEN 0x01 /* Internal bus parity error enable */ 426} 427 428/* 429 * Data FIFO Status 430 */ 431register DFSTATUS { 432 address 0x01A 433 access_mode RO 434 modes M_DFF0, M_DFF1 435 field PRELOAD_AVAIL 0x80 436 field PKT_PRELOAD_AVAIL 0x40 437 field MREQPEND 0x10 438 field HDONE 0x08 439 field DFTHRESH 0x04 440 field FIFOFULL 0x02 441 field FIFOEMP 0x01 442} 443 444/* 445 * S/G Cache Pointer 446 */ 447register SG_CACHE_PRE { 448 address 0x01B 449 access_mode WO 450 modes M_DFF0, M_DFF1 451 field SG_ADDR_MASK 0xf8 452 field ODD_SEG 0x04 453 field LAST_SEG 0x02 454} 455 456register SG_CACHE_SHADOW { 457 address 0x01B 458 access_mode RO 459 modes M_DFF0, M_DFF1 460 field SG_ADDR_MASK 0xf8 461 field ODD_SEG 0x04 462 field LAST_SEG 0x02 463 field LAST_SEG_DONE 0x01 464} 465 466/* 467 * Arbiter Control 468 */ 469register ARBCTL { 470 address 0x01B 471 access_mode RW 472 modes M_CFG 473 field RESET_HARB 0x80 474 field RETRY_SWEN 0x08 475 field USE_TIME 0x07 476} 477 478/* 479 * Data Channel Host Address 480 */ 481register HADDR { 482 address 0x070 483 access_mode RW 484 size 8 485 modes M_DFF0, M_DFF1 486} 487 488/* 489 * Host Overlay DMA Address 490 */ 491register HODMAADR { 492 address 0x070 493 access_mode RW 494 size 8 495 modes M_SCSI 496} 497 498/* 499 * PCI PLL Delay. 500 */ 501register PLLDELAY { 502 address 0x070 503 access_mode RW 504 size 1 505 modes M_CFG 506 field SPLIT_DROP_REQ 0x80 507} 508 509/* 510 * Data Channel Host Count 511 */ 512register HCNT { 513 address 0x078 514 access_mode RW 515 size 3 516 modes M_DFF0, M_DFF1 517} 518 519/* 520 * Host Overlay DMA Count 521 */ 522register HODMACNT { 523 address 0x078 524 access_mode RW 525 size 2 526 modes M_SCSI 527} 528 529/* 530 * Host Overlay DMA Enable 531 */ 532register HODMAEN { 533 address 0x07A 534 access_mode RW 535 modes M_SCSI 536} 537 538/* 539 * Scatter/Gather Host Address 540 */ 541register SGHADDR { 542 address 0x07C 543 access_mode RW 544 size 8 545 modes M_DFF0, M_DFF1 546} 547 548/* 549 * SCB Host Address 550 */ 551register SCBHADDR { 552 address 0x07C 553 access_mode RW 554 size 8 555 modes M_CCHAN 556} 557 558/* 559 * Scatter/Gather Host Count 560 */ 561register SGHCNT { 562 address 0x084 563 access_mode RW 564 modes M_DFF0, M_DFF1 565} 566 567/* 568 * SCB Host Count 569 */ 570register SCBHCNT { 571 address 0x084 572 access_mode RW 573 modes M_CCHAN 574} 575 576/* 577 * Data FIFO Threshold 578 */ 579register DFF_THRSH { 580 address 0x088 581 access_mode RW 582 modes M_CFG 583 field WR_DFTHRSH 0x70 { 584 WR_DFTHRSH_MIN, 585 WR_DFTHRSH_25, 586 WR_DFTHRSH_50, 587 WR_DFTHRSH_63, 588 WR_DFTHRSH_75, 589 WR_DFTHRSH_85, 590 WR_DFTHRSH_90, 591 WR_DFTHRSH_MAX 592 } 593 field RD_DFTHRSH 0x07 { 594 RD_DFTHRSH_MIN, 595 RD_DFTHRSH_25, 596 RD_DFTHRSH_50, 597 RD_DFTHRSH_63, 598 RD_DFTHRSH_75, 599 RD_DFTHRSH_85, 600 RD_DFTHRSH_90, 601 RD_DFTHRSH_MAX 602 } 603} 604 605/* 606 * ROM Address 607 */ 608register ROMADDR { 609 address 0x08A 610 access_mode RW 611 size 3 612} 613 614/* 615 * ROM Control 616 */ 617register ROMCNTRL { 618 address 0x08D 619 access_mode RW 620 field ROMOP 0xE0 621 field ROMSPD 0x18 622 field REPEAT 0x02 623 field RDY 0x01 624} 625 626/* 627 * ROM Data 628 */ 629register ROMDATA { 630 address 0x08E 631 access_mode RW 632} 633 634/* 635 * Data Channel Receive Message 0 636 */ 637register DCHRXMSG0 { 638 address 0x090 639 access_mode RO 640 modes M_DFF0, M_DFF1 641 field CDNUM 0xF8 642 field CFNUM 0x07 643} 644 645/* 646 * CMC Receive Message 0 647 */ 648register CMCRXMSG0 { 649 address 0x090 650 access_mode RO 651 modes M_CCHAN 652 field CDNUM 0xF8 653 field CFNUM 0x07 654} 655 656/* 657 * Overlay Receive Message 0 658 */ 659register OVLYRXMSG0 { 660 address 0x090 661 access_mode RO 662 modes M_SCSI 663 field CDNUM 0xF8 664 field CFNUM 0x07 665} 666 667/* 668 * Relaxed Order Enable 669 */ 670register ROENABLE { 671 address 0x090 672 access_mode RW 673 modes M_CFG 674 field MSIROEN 0x20 675 field OVLYROEN 0x10 676 field CMCROEN 0x08 677 field SGROEN 0x04 678 field DCH1ROEN 0x02 679 field DCH0ROEN 0x01 680} 681 682/* 683 * Data Channel Receive Message 1 684 */ 685register DCHRXMSG1 { 686 address 0x091 687 access_mode RO 688 modes M_DFF0, M_DFF1 689 field CBNUM 0xFF 690} 691 692/* 693 * CMC Receive Message 1 694 */ 695register CMCRXMSG1 { 696 address 0x091 697 access_mode RO 698 modes M_CCHAN 699 field CBNUM 0xFF 700} 701 702/* 703 * Overlay Receive Message 1 704 */ 705register OVLYRXMSG1 { 706 address 0x091 707 access_mode RO 708 modes M_SCSI 709 field CBNUM 0xFF 710} 711 712/* 713 * No Snoop Enable 714 */ 715register NSENABLE { 716 address 0x091 717 access_mode RW 718 modes M_CFG 719 field MSINSEN 0x20 720 field OVLYNSEN 0x10 721 field CMCNSEN 0x08 722 field SGNSEN 0x04 723 field DCH1NSEN 0x02 724 field DCH0NSEN 0x01 725} 726 727/* 728 * Data Channel Receive Message 2 729 */ 730register DCHRXMSG2 { 731 address 0x092 732 access_mode RO 733 modes M_DFF0, M_DFF1 734 field MINDEX 0xFF 735} 736 737/* 738 * CMC Receive Message 2 739 */ 740register CMCRXMSG2 { 741 address 0x092 742 access_mode RO 743 modes M_CCHAN 744 field MINDEX 0xFF 745} 746 747/* 748 * Overlay Receive Message 2 749 */ 750register OVLYRXMSG2 { 751 address 0x092 752 access_mode RO 753 modes M_SCSI 754 field MINDEX 0xFF 755} 756 757/* 758 * Outstanding Split Transactions 759 */ 760register OST { 761 address 0x092 762 access_mode RW 763 modes M_CFG 764} 765 766/* 767 * Data Channel Receive Message 3 768 */ 769register DCHRXMSG3 { 770 address 0x093 771 access_mode RO 772 modes M_DFF0, M_DFF1 773 field MCLASS 0x0F 774} 775 776/* 777 * CMC Receive Message 3 778 */ 779register CMCRXMSG3 { 780 address 0x093 781 access_mode RO 782 modes M_CCHAN 783 field MCLASS 0x0F 784} 785 786/* 787 * Overlay Receive Message 3 788 */ 789register OVLYRXMSG3 { 790 address 0x093 791 access_mode RO 792 modes M_SCSI 793 field MCLASS 0x0F 794} 795 796/* 797 * PCI-X Control 798 */ 799register PCIXCTL { 800 address 0x093 801 access_mode RW 802 modes M_CFG 803 field SERRPULSE 0x80 804 field UNEXPSCIEN 0x20 805 field SPLTSMADIS 0x10 806 field SPLTSTADIS 0x08 807 field SRSPDPEEN 0x04 808 field TSCSERREN 0x02 809 field CMPABCDIS 0x01 810} 811 812/* 813 * CMC Sequencer Byte Count 814 */ 815register CMCSEQBCNT { 816 address 0x094 817 access_mode RO 818 modes M_CCHAN 819} 820 821/* 822 * Overlay Sequencer Byte Count 823 */ 824register OVLYSEQBCNT { 825 address 0x094 826 access_mode RO 827 modes M_SCSI 828} 829 830/* 831 * Data Channel Sequencer Byte Count 832 */ 833register DCHSEQBCNT { 834 address 0x094 835 access_mode RO 836 size 2 837 modes M_DFF0, M_DFF1 838} 839 840/* 841 * Data Channel Split Status 0 842 */ 843register DCHSPLTSTAT0 { 844 address 0x096 845 access_mode RW 846 modes M_DFF0, M_DFF1 847 field STAETERM 0x80 848 field SCBCERR 0x40 849 field SCADERR 0x20 850 field SCDATBUCKET 0x10 851 field CNTNOTCMPLT 0x08 852 field RXOVRUN 0x04 853 field RXSCEMSG 0x02 854 field RXSPLTRSP 0x01 855} 856 857/* 858 * CMC Split Status 0 859 */ 860register CMCSPLTSTAT0 { 861 address 0x096 862 access_mode RW 863 modes M_CCHAN 864 field STAETERM 0x80 865 field SCBCERR 0x40 866 field SCADERR 0x20 867 field SCDATBUCKET 0x10 868 field CNTNOTCMPLT 0x08 869 field RXOVRUN 0x04 870 field RXSCEMSG 0x02 871 field RXSPLTRSP 0x01 872} 873 874/* 875 * Overlay Split Status 0 876 */ 877register OVLYSPLTSTAT0 { 878 address 0x096 879 access_mode RW 880 modes M_SCSI 881 field STAETERM 0x80 882 field SCBCERR 0x40 883 field SCADERR 0x20 884 field SCDATBUCKET 0x10 885 field CNTNOTCMPLT 0x08 886 field RXOVRUN 0x04 887 field RXSCEMSG 0x02 888 field RXSPLTRSP 0x01 889} 890 891/* 892 * Data Channel Split Status 1 893 */ 894register DCHSPLTSTAT1 { 895 address 0x097 896 access_mode RW 897 modes M_DFF0, M_DFF1 898 field RXDATABUCKET 0x01 899} 900 901/* 902 * CMC Split Status 1 903 */ 904register CMCSPLTSTAT1 { 905 address 0x097 906 access_mode RW 907 modes M_CCHAN 908 field RXDATABUCKET 0x01 909} 910 911/* 912 * Overlay Split Status 1 913 */ 914register OVLYSPLTSTAT1 { 915 address 0x097 916 access_mode RW 917 modes M_SCSI 918 field RXDATABUCKET 0x01 919} 920 921/* 922 * S/G Receive Message 0 923 */ 924register SGRXMSG0 { 925 address 0x098 926 access_mode RO 927 modes M_DFF0, M_DFF1 928 field CDNUM 0xF8 929 field CFNUM 0x07 930} 931 932/* 933 * S/G Receive Message 1 934 */ 935register SGRXMSG1 { 936 address 0x099 937 access_mode RO 938 modes M_DFF0, M_DFF1 939 field CBNUM 0xFF 940} 941 942/* 943 * S/G Receive Message 2 944 */ 945register SGRXMSG2 { 946 address 0x09A 947 access_mode RO 948 modes M_DFF0, M_DFF1 949 field MINDEX 0xFF 950} 951 952/* 953 * S/G Receive Message 3 954 */ 955register SGRXMSG3 { 956 address 0x09B 957 access_mode RO 958 modes M_DFF0, M_DFF1 959 field MCLASS 0x0F 960} 961 962/* 963 * Slave Split Out Address 0 964 */ 965register SLVSPLTOUTADR0 { 966 address 0x098 967 access_mode RO 968 modes M_SCSI 969 field LOWER_ADDR 0x7F 970} 971 972/* 973 * Slave Split Out Address 1 974 */ 975register SLVSPLTOUTADR1 { 976 address 0x099 977 access_mode RO 978 modes M_SCSI 979 field REQ_DNUM 0xF8 980 field REQ_FNUM 0x07 981} 982 983/* 984 * Slave Split Out Address 2 985 */ 986register SLVSPLTOUTADR2 { 987 address 0x09A 988 access_mode RO 989 modes M_SCSI 990 field REQ_BNUM 0xFF 991} 992 993/* 994 * Slave Split Out Address 3 995 */ 996register SLVSPLTOUTADR3 { 997 address 0x09B 998 access_mode RO 999 modes M_SCSI 1000 field RLXORD 020 1001 field TAG_NUM 0x1F 1002} 1003 1004/* 1005 * SG Sequencer Byte Count 1006 */ 1007register SGSEQBCNT { 1008 address 0x09C 1009 access_mode RO 1010 modes M_DFF0, M_DFF1 1011} 1012 1013/* 1014 * Slave Split Out Attribute 0 1015 */ 1016register SLVSPLTOUTATTR0 { 1017 address 0x09C 1018 access_mode RO 1019 modes M_SCSI 1020 field LOWER_BCNT 0xFF 1021} 1022 1023/* 1024 * Slave Split Out Attribute 1 1025 */ 1026register SLVSPLTOUTATTR1 { 1027 address 0x09D 1028 access_mode RO 1029 modes M_SCSI 1030 field CMPLT_DNUM 0xF8 1031 field CMPLT_FNUM 0x07 1032} 1033 1034/* 1035 * Slave Split Out Attribute 2 1036 */ 1037register SLVSPLTOUTATTR2 { 1038 address 0x09E 1039 access_mode RO 1040 size 2 1041 modes M_SCSI 1042 field CMPLT_BNUM 0xFF 1043} 1044/* 1045 * S/G Split Status 0 1046 */ 1047register SGSPLTSTAT0 { 1048 address 0x09E 1049 access_mode RW 1050 modes M_DFF0, M_DFF1 1051 field STAETERM 0x80 1052 field SCBCERR 0x40 1053 field SCADERR 0x20 1054 field SCDATBUCKET 0x10 1055 field CNTNOTCMPLT 0x08 1056 field RXOVRUN 0x04 1057 field RXSCEMSG 0x02 1058 field RXSPLTRSP 0x01 1059} 1060 1061/* 1062 * S/G Split Status 1 1063 */ 1064register SGSPLTSTAT1 { 1065 address 0x09F 1066 access_mode RW 1067 modes M_DFF0, M_DFF1 1068 field RXDATABUCKET 0x01 1069} 1070 1071/* 1072 * Special Function 1073 */ 1074register SFUNCT { 1075 address 0x09f 1076 access_mode RW 1077 modes M_CFG 1078 field TEST_GROUP 0xF0 1079 field TEST_NUM 0x0F 1080} 1081 1082/* 1083 * Data FIFO 0 PCI Status 1084 */ 1085register DF0PCISTAT { 1086 address 0x0A0 1087 access_mode RW 1088 modes M_CFG 1089 field DPE 0x80 1090 field SSE 0x40 1091 field RMA 0x20 1092 field RTA 0x10 1093 field SCAAPERR 0x08 1094 field RDPERR 0x04 1095 field TWATERR 0x02 1096 field DPR 0x01 1097} 1098 1099/* 1100 * Data FIFO 1 PCI Status 1101 */ 1102register DF1PCISTAT { 1103 address 0x0A1 1104 access_mode RW 1105 modes M_CFG 1106 field DPE 0x80 1107 field SSE 0x40 1108 field RMA 0x20 1109 field RTA 0x10 1110 field SCAAPERR 0x08 1111 field RDPERR 0x04 1112 field TWATERR 0x02 1113 field DPR 0x01 1114} 1115 1116/* 1117 * S/G PCI Status 1118 */ 1119register SGPCISTAT { 1120 address 0x0A2 1121 access_mode RW 1122 modes M_CFG 1123 field DPE 0x80 1124 field SSE 0x40 1125 field RMA 0x20 1126 field RTA 0x10 1127 field SCAAPERR 0x08 1128 field RDPERR 0x04 1129 field DPR 0x01 1130} 1131 1132/* 1133 * CMC PCI Status 1134 */ 1135register CMCPCISTAT { 1136 address 0x0A3 1137 access_mode RW 1138 modes M_CFG 1139 field DPE 0x80 1140 field SSE 0x40 1141 field RMA 0x20 1142 field RTA 0x10 1143 field SCAAPERR 0x08 1144 field RDPERR 0x04 1145 field TWATERR 0x02 1146 field DPR 0x01 1147} 1148 1149/* 1150 * Overlay PCI Status 1151 */ 1152register OVLYPCISTAT { 1153 address 0x0A4 1154 access_mode RW 1155 modes M_CFG 1156 field DPE 0x80 1157 field SSE 0x40 1158 field RMA 0x20 1159 field RTA 0x10 1160 field SCAAPERR 0x08 1161 field RDPERR 0x04 1162 field DPR 0x01 1163} 1164 1165/* 1166 * PCI Status for MSI Master DMA Transfer 1167 */ 1168register MSIPCISTAT { 1169 address 0x0A6 1170 access_mode RW 1171 modes M_CFG 1172 field SSE 0x40 1173 field RMA 0x20 1174 field RTA 0x10 1175 field CLRPENDMSI 0x08 1176 field TWATERR 0x02 1177 field DPR 0x01 1178} 1179 1180/* 1181 * PCI Status for Target 1182 */ 1183register TARGPCISTAT { 1184 address 0x0A7 1185 access_mode RW 1186 modes M_CFG 1187 field DPE 0x80 1188 field SSE 0x40 1189 field STA 0x08 1190 field TWATERR 0x02 1191} 1192 1193/* 1194 * LQ Packet In 1195 * The last LQ Packet received 1196 */ 1197register LQIN { 1198 address 0x020 1199 access_mode RW 1200 size 20 1201 modes M_DFF0, M_DFF1, M_SCSI 1202} 1203 1204/* 1205 * SCB Type Pointer 1206 * SCB offset for Target Mode SCB type information 1207 */ 1208register TYPEPTR { 1209 address 0x020 1210 access_mode RW 1211 modes M_CFG 1212} 1213 1214/* 1215 * Queue Tag Pointer 1216 * SCB offset to the Two Byte tag identifier used for target mode. 1217 */ 1218register TAGPTR { 1219 address 0x021 1220 access_mode RW 1221 modes M_CFG 1222} 1223 1224/* 1225 * Logical Unit Number Pointer 1226 * SCB offset to the LSB (little endian) of the lun field. 1227 */ 1228register LUNPTR { 1229 address 0x022 1230 access_mode RW 1231 modes M_CFG 1232} 1233 1234/* 1235 * Data Length Pointer 1236 * SCB offset for the 4 byte data length field in target mode. 1237 */ 1238register DATALENPTR { 1239 address 0x023 1240 access_mode RW 1241 modes M_CFG 1242} 1243 1244/* 1245 * Status Length Pointer 1246 * SCB offset to the two byte status field in target SCBs. 1247 */ 1248register STATLENPTR { 1249 address 0x024 1250 access_mode RW 1251 modes M_CFG 1252} 1253 1254/* 1255 * Command Length Pointer 1256 * Scb offset for the CDB length field in initiator SCBs. 1257 */ 1258register CMDLENPTR { 1259 address 0x025 1260 access_mode RW 1261 modes M_CFG 1262} 1263 1264/* 1265 * Task Attribute Pointer 1266 * Scb offset for the byte field specifying the attribute byte 1267 * to be used in command packets. 1268 */ 1269register ATTRPTR { 1270 address 0x026 1271 access_mode RW 1272 modes M_CFG 1273} 1274 1275/* 1276 * Task Management Flags Pointer 1277 * Scb offset for the byte field specifying the attribute flags 1278 * byte to be used in command packets. 1279 */ 1280register FLAGPTR { 1281 address 0x027 1282 access_mode RW 1283 modes M_CFG 1284} 1285 1286/* 1287 * Command Pointer 1288 * Scb offset for the first byte in the CDB for initiator SCBs. 1289 */ 1290register CMDPTR { 1291 address 0x028 1292 access_mode RW 1293 modes M_CFG 1294} 1295 1296/* 1297 * Queue Next Pointer 1298 * Scb offset for the 2 byte "next scb link". 1299 */ 1300register QNEXTPTR { 1301 address 0x029 1302 access_mode RW 1303 modes M_CFG 1304} 1305 1306/* 1307 * SCSI ID Pointer 1308 * Scb offset to the value to place in the SCSIID register 1309 * during target mode connections. 1310 */ 1311register IDPTR { 1312 address 0x02A 1313 access_mode RW 1314 modes M_CFG 1315} 1316 1317/* 1318 * Command Aborted Byte Pointer 1319 * Offset to the SCB flags field that includes the 1320 * "SCB aborted" status bit. 1321 */ 1322register ABRTBYTEPTR { 1323 address 0x02B 1324 access_mode RW 1325 modes M_CFG 1326} 1327 1328/* 1329 * Command Aborted Bit Pointer 1330 * Bit offset in the SCB flags field for "SCB aborted" status. 1331 */ 1332register ABRTBITPTR { 1333 address 0x02C 1334 access_mode RW 1335 modes M_CFG 1336} 1337 1338/* 1339 * Rev B or greater. 1340 */ 1341register MAXCMDBYTES { 1342 address 0x02D 1343 access_mode RW 1344 modes M_CFG 1345} 1346 1347/* 1348 * Rev B or greater. 1349 */ 1350register MAXCMD2RCV { 1351 address 0x02E 1352 access_mode RW 1353 modes M_CFG 1354} 1355 1356/* 1357 * Rev B or greater. 1358 */ 1359register SHORTTHRESH { 1360 address 0x02F 1361 access_mode RW 1362 modes M_CFG 1363} 1364 1365/* 1366 * Logical Unit Number Length 1367 * The length, in bytes, of the SCB lun field. 1368 */ 1369register LUNLEN { 1370 address 0x030 1371 access_mode RW 1372 modes M_CFG 1373 mask ILUNLEN 0x0F 1374 mask TLUNLEN 0xF0 1375} 1376const LUNLEN_SINGLE_LEVEL_LUN 0xF 1377 1378/* 1379 * CDB Limit 1380 * The size, in bytes, of the embedded CDB field in initator SCBs. 1381 */ 1382register CDBLIMIT { 1383 address 0x031 1384 access_mode RW 1385 modes M_CFG 1386} 1387 1388/* 1389 * Maximum Commands 1390 * The maximum number of commands to issue during a 1391 * single packetized connection. 1392 */ 1393register MAXCMD { 1394 address 0x032 1395 access_mode RW 1396 modes M_CFG 1397} 1398 1399/* 1400 * Maximum Command Counter 1401 * The number of commands already sent during this connection 1402 */ 1403register MAXCMDCNT { 1404 address 0x033 1405 access_mode RW 1406 modes M_CFG 1407} 1408 1409/* 1410 * LQ Packet Reserved Bytes 1411 * The bytes to be sent in the currently reserved fileds 1412 * of all LQ packets. 1413 */ 1414register LQRSVD01 { 1415 address 0x034 1416 access_mode RW 1417 modes M_SCSI 1418} 1419register LQRSVD16 { 1420 address 0x035 1421 access_mode RW 1422 modes M_SCSI 1423} 1424register LQRSVD17 { 1425 address 0x036 1426 access_mode RW 1427 modes M_SCSI 1428} 1429 1430/* 1431 * Command Reserved 0 1432 * The byte to be sent for the reserved byte 0 of 1433 * outgoing command packets. 1434 */ 1435register CMDRSVD0 { 1436 address 0x037 1437 access_mode RW 1438 modes M_CFG 1439} 1440 1441/* 1442 * LQ Manager Control 0 1443 */ 1444register LQCTL0 { 1445 address 0x038 1446 access_mode RW 1447 modes M_CFG 1448 field LQITARGCLT 0xC0 1449 field LQIINITGCLT 0x30 1450 field LQ0TARGCLT 0x0C 1451 field LQ0INITGCLT 0x03 1452} 1453 1454/* 1455 * LQ Manager Control 1 1456 */ 1457register LQCTL1 { 1458 address 0x038 1459 access_mode RW 1460 modes M_DFF0, M_DFF1, M_SCSI 1461 field PCI2PCI 0x04 1462 field SINGLECMD 0x02 1463 field ABORTPENDING 0x01 1464} 1465 1466/* 1467 * LQ Manager Control 2 1468 */ 1469register LQCTL2 { 1470 address 0x039 1471 access_mode RW 1472 modes M_DFF0, M_DFF1, M_SCSI 1473 field LQIRETRY 0x80 1474 field LQICONTINUE 0x40 1475 field LQITOIDLE 0x20 1476 field LQIPAUSE 0x10 1477 field LQORETRY 0x08 1478 field LQOCONTINUE 0x04 1479 field LQOTOIDLE 0x02 1480 field LQOPAUSE 0x01 1481} 1482 1483/* 1484 * SCSI RAM BIST0 1485 */ 1486register SCSBIST0 { 1487 address 0x039 1488 access_mode RW 1489 modes M_CFG 1490 field GSBISTERR 0x40 1491 field GSBISTDONE 0x20 1492 field GSBISTRUN 0x10 1493 field OSBISTERR 0x04 1494 field OSBISTDONE 0x02 1495 field OSBISTRUN 0x01 1496} 1497 1498/* 1499 * SCSI Sequence Control0 1500 */ 1501register SCSISEQ0 { 1502 address 0x03A 1503 access_mode RW 1504 modes M_DFF0, M_DFF1, M_SCSI 1505 field TEMODEO 0x80 1506 field ENSELO 0x40 1507 field ENARBO 0x20 1508 field FORCEBUSFREE 0x10 1509 field SCSIRSTO 0x01 1510} 1511 1512/* 1513 * SCSI RAM BIST 1 1514 */ 1515register SCSBIST1 { 1516 address 0x03A 1517 access_mode RW 1518 modes M_CFG 1519 field NTBISTERR 0x04 1520 field NTBISTDONE 0x02 1521 field NTBISTRUN 0x01 1522} 1523 1524/* 1525 * SCSI Sequence Control 1 1526 */ 1527register SCSISEQ1 { 1528 address 0x03B 1529 access_mode RW 1530 modes M_DFF0, M_DFF1, M_SCSI 1531 field MANUALCTL 0x40 1532 field ENSELI 0x20 1533 field ENRSELI 0x10 1534 field MANUALP 0x0C 1535 field ENAUTOATNP 0x02 1536 field ALTSTIM 0x01 1537} 1538 1539/* 1540 * SCSI Transfer Control 0 1541 */ 1542register SXFRCTL0 { 1543 address 0x03C 1544 access_mode RW 1545 modes M_SCSI 1546 field DFON 0x80 1547 field DFPEXP 0x40 1548 field BIOSCANCELEN 0x10 1549 field SPIOEN 0x08 1550} 1551 1552/* 1553 * SCSI Transfer Control 1 1554 */ 1555register SXFRCTL1 { 1556 address 0x03D 1557 access_mode RW 1558 modes M_SCSI 1559 field BITBUCKET 0x80 1560 field ENSACHK 0x40 1561 field ENSPCHK 0x20 1562 field STIMESEL 0x18 1563 field ENSTIMER 0x04 1564 field ACTNEGEN 0x02 1565 field STPWEN 0x01 1566} 1567 1568/* 1569 * SCSI Transfer Control 2 1570 */ 1571register SXFRCTL2 { 1572 address 0x03E 1573 access_mode RW 1574 modes M_SCSI 1575 field AUTORSTDIS 0x10 1576 field CMDDMAEN 0x08 1577 field ASU 0x07 1578} 1579 1580/* 1581 * SCSI Bus Initiator IDs 1582 * Bitmask of observed initiators on the bus. 1583 */ 1584register BUSINITID { 1585 address 0x03C 1586 access_mode RW 1587 modes M_CFG 1588 size 2 1589} 1590 1591/* 1592 * Data Length Counters 1593 * Packet byte counter. 1594 */ 1595register DLCOUNT { 1596 address 0x03C 1597 access_mode RW 1598 modes M_DFF0, M_DFF1 1599 size 3 1600} 1601 1602/* 1603 * Data FIFO Status 1604 */ 1605register DFFSTAT { 1606 address 0x03F 1607 access_mode RW 1608 modes M_SCSI 1609 field FIFO1FREE 0x20 1610 field FIFO0FREE 0x10 1611 /* 1612 * On the B, this enum only works 1613 * in the read direction. For writes, 1614 * you must use the B version of the 1615 * CURRFIFO_0 definition which is defined 1616 * as a constant outside of this register 1617 * definition to avoid confusing the 1618 * register pretty printing code. 1619 */ 1620 enum CURRFIFO 0x03 { 1621 CURRFIFO_0, 1622 CURRFIFO_1, 1623 CURRFIFO_NONE 0x3 1624 } 1625} 1626 1627const B_CURRFIFO_0 0x2 1628 1629/* 1630 * SCSI Bus Target IDs 1631 * Bitmask of observed targets on the bus. 1632 */ 1633register BUSTARGID { 1634 address 0x03E 1635 access_mode RW 1636 modes M_CFG 1637 size 2 1638} 1639 1640/* 1641 * SCSI Control Signal Out 1642 */ 1643register SCSISIGO { 1644 address 0x040 1645 access_mode RW 1646 modes M_DFF0, M_DFF1, M_SCSI 1647 field CDO 0x80 1648 field IOO 0x40 1649 field MSGO 0x20 1650 field ATNO 0x10 1651 field SELO 0x08 1652 field BSYO 0x04 1653 field REQO 0x02 1654 field ACKO 0x01 1655/* 1656 * Possible phases to write into SCSISIG0 1657 */ 1658 enum PHASE_MASK CDO|IOO|MSGO { 1659 P_DATAOUT 0x0, 1660 P_DATAIN IOO, 1661 P_DATAOUT_DT P_DATAOUT|MSGO, 1662 P_DATAIN_DT P_DATAIN|MSGO, 1663 P_COMMAND CDO, 1664 P_MESGOUT CDO|MSGO, 1665 P_STATUS CDO|IOO, 1666 P_MESGIN CDO|IOO|MSGO 1667 } 1668} 1669 1670register SCSISIGI { 1671 address 0x041 1672 access_mode RO 1673 modes M_DFF0, M_DFF1, M_SCSI 1674 field CDI 0x80 1675 field IOI 0x40 1676 field MSGI 0x20 1677 field ATNI 0x10 1678 field SELI 0x08 1679 field BSYI 0x04 1680 field REQI 0x02 1681 field ACKI 0x01 1682/* 1683 * Possible phases in SCSISIGI 1684 */ 1685 enum PHASE_MASK CDO|IOO|MSGO { 1686 P_DATAOUT 0x0, 1687 P_DATAIN IOO, 1688 P_DATAOUT_DT P_DATAOUT|MSGO, 1689 P_DATAIN_DT P_DATAIN|MSGO, 1690 P_COMMAND CDO, 1691 P_MESGOUT CDO|MSGO, 1692 P_STATUS CDO|IOO, 1693 P_MESGIN CDO|IOO|MSGO 1694 } 1695} 1696 1697/* 1698 * Multiple Target IDs 1699 * Bitmask of ids to respond as a target. 1700 */ 1701register MULTARGID { 1702 address 0x040 1703 access_mode RW 1704 modes M_CFG 1705 size 2 1706} 1707 1708/* 1709 * SCSI Phase 1710 */ 1711register SCSIPHASE { 1712 address 0x042 1713 access_mode RO 1714 modes M_DFF0, M_DFF1, M_SCSI 1715 field STATUS_PHASE 0x20 1716 field COMMAND_PHASE 0x10 1717 field MSG_IN_PHASE 0x08 1718 field MSG_OUT_PHASE 0x04 1719 field DATA_PHASE_MASK 0x03 { 1720 DATA_OUT_PHASE 0x01, 1721 DATA_IN_PHASE 0x02 1722 } 1723} 1724 1725/* 1726 * SCSI Data 0 Image 1727 */ 1728register SCSIDAT0_IMG { 1729 address 0x043 1730 access_mode RW 1731 modes M_DFF0, M_DFF1, M_SCSI 1732} 1733 1734/* 1735 * SCSI Latched Data 1736 */ 1737register SCSIDAT { 1738 address 0x044 1739 access_mode RW 1740 modes M_DFF0, M_DFF1, M_SCSI 1741 size 2 1742} 1743 1744/* 1745 * SCSI Data Bus 1746 */ 1747register SCSIBUS { 1748 address 0x046 1749 access_mode RW 1750 modes M_DFF0, M_DFF1, M_SCSI 1751 size 2 1752} 1753 1754/* 1755 * Target ID In 1756 */ 1757register TARGIDIN { 1758 address 0x048 1759 access_mode RO 1760 modes M_DFF0, M_DFF1, M_SCSI 1761 field CLKOUT 0x80 1762 field TARGID 0x0F 1763} 1764 1765/* 1766 * Selection/Reselection ID 1767 * Upper four bits are the device id. The ONEBIT is set when the re/selecting 1768 * device did not set its own ID. 1769 */ 1770register SELID { 1771 address 0x049 1772 access_mode RW 1773 modes M_DFF0, M_DFF1, M_SCSI 1774 field SELID_MASK 0xf0 1775 field ONEBIT 0x08 1776} 1777 1778/* 1779 * SCSI Block Control 1780 * Controls Bus type and channel selection. SELWIDE allows for the 1781 * coexistence of 8bit and 16bit devices on a wide bus. 1782 */ 1783register SBLKCTL { 1784 address 0x04A 1785 access_mode RW 1786 modes M_DFF0, M_DFF1, M_SCSI 1787 field DIAGLEDEN 0x80 1788 field DIAGLEDON 0x40 1789 field ENAB40 0x08 /* LVD transceiver active */ 1790 field ENAB20 0x04 /* SE/HVD transceiver active */ 1791 field SELWIDE 0x02 1792} 1793 1794/* 1795 * Option Mode 1796 */ 1797register OPTIONMODE { 1798 address 0x04A 1799 access_mode RW 1800 modes M_CFG 1801 field BIOSCANCTL 0x80 1802 field AUTOACKEN 0x40 1803 field BIASCANCTL 0x20 1804 field BUSFREEREV 0x10 1805 field ENDGFORMCHK 0x04 1806 field AUTO_MSGOUT_DE 0x02 1807 mask OPTIONMODE_DEFAULTS AUTO_MSGOUT_DE 1808} 1809 1810/* 1811 * SCSI Status 0 1812 */ 1813register SSTAT0 { 1814 address 0x04B 1815 access_mode RO 1816 modes M_DFF0, M_DFF1, M_SCSI 1817 field TARGET 0x80 /* Board acting as target */ 1818 field SELDO 0x40 /* Selection Done */ 1819 field SELDI 0x20 /* Board has been selected */ 1820 field SELINGO 0x10 /* Selection In Progress */ 1821 field IOERR 0x08 /* LVD Tranceiver mode changed */ 1822 field OVERRUN 0x04 /* SCSI Offset overrun detected */ 1823 field SPIORDY 0x02 /* SCSI PIO Ready */ 1824 field ARBDO 0x01 /* Arbitration Done Out */ 1825} 1826 1827/* 1828 * Clear SCSI Interrupt 0 1829 * Writing a 1 to a bit clears the associated SCSI Interrupt in SSTAT0. 1830 */ 1831register CLRSINT0 { 1832 address 0x04B 1833 access_mode WO 1834 modes M_DFF0, M_DFF1, M_SCSI 1835 field CLRSELDO 0x40 1836 field CLRSELDI 0x20 1837 field CLRSELINGO 0x10 1838 field CLRIOERR 0x08 1839 field CLROVERRUN 0x04 1840 field CLRSPIORDY 0x02 1841 field CLRARBDO 0x01 1842} 1843 1844/* 1845 * SCSI Interrupt Mode 0 1846 * Setting any bit will enable the corresponding function 1847 * in SIMODE0 to interrupt via the IRQ pin. 1848 */ 1849register SIMODE0 { 1850 address 0x04B 1851 access_mode RW 1852 modes M_CFG 1853 field ENSELDO 0x40 1854 field ENSELDI 0x20 1855 field ENSELINGO 0x10 1856 field ENIOERR 0x08 1857 field ENOVERRUN 0x04 1858 field ENSPIORDY 0x02 1859 field ENARBDO 0x01 1860} 1861 1862/* 1863 * SCSI Status 1 1864 */ 1865register SSTAT1 { 1866 address 0x04C 1867 access_mode RO 1868 modes M_DFF0, M_DFF1, M_SCSI 1869 field SELTO 0x80 1870 field ATNTARG 0x40 1871 field SCSIRSTI 0x20 1872 field PHASEMIS 0x10 1873 field BUSFREE 0x08 1874 field SCSIPERR 0x04 1875 field STRB2FAST 0x02 1876 field REQINIT 0x01 1877} 1878 1879/* 1880 * Clear SCSI Interrupt 1 1881 * Writing a 1 to a bit clears the associated SCSI Interrupt in SSTAT1. 1882 */ 1883register CLRSINT1 { 1884 address 0x04C 1885 access_mode WO 1886 modes M_DFF0, M_DFF1, M_SCSI 1887 field CLRSELTIMEO 0x80 1888 field CLRATNO 0x40 1889 field CLRSCSIRSTI 0x20 1890 field CLRBUSFREE 0x08 1891 field CLRSCSIPERR 0x04 1892 field CLRSTRB2FAST 0x02 1893 field CLRREQINIT 0x01 1894} 1895 1896/* 1897 * SCSI Status 2 1898 */ 1899register SSTAT2 { 1900 address 0x04d 1901 access_mode RO 1902 modes M_DFF0, M_DFF1, M_SCSI 1903 field BUSFREETIME 0xc0 { 1904 BUSFREE_LQO 0x40, 1905 BUSFREE_DFF0 0x80, 1906 BUSFREE_DFF1 0xC0 1907 } 1908 field NONPACKREQ 0x20 1909 field EXP_ACTIVE 0x10 /* SCSI Expander Active */ 1910 field BSYX 0x08 /* Busy Expander */ 1911 field WIDE_RES 0x04 /* Modes 0 and 1 only */ 1912 field SDONE 0x02 /* Modes 0 and 1 only */ 1913 field DMADONE 0x01 /* Modes 0 and 1 only */ 1914} 1915 1916/* 1917 * Clear SCSI Interrupt 2 1918 */ 1919register CLRSINT2 { 1920 address 0x04D 1921 access_mode WO 1922 modes M_DFF0, M_DFF1, M_SCSI 1923 field CLRNONPACKREQ 0x20 1924 field CLRWIDE_RES 0x04 /* Modes 0 and 1 only */ 1925 field CLRSDONE 0x02 /* Modes 0 and 1 only */ 1926 field CLRDMADONE 0x01 /* Modes 0 and 1 only */ 1927} 1928 1929/* 1930 * SCSI Interrupt Mode 2 1931 */ 1932register SIMODE2 { 1933 address 0x04D 1934 access_mode RW 1935 modes M_CFG 1936 field ENWIDE_RES 0x04 1937 field ENSDONE 0x02 1938 field ENDMADONE 0x01 1939} 1940 1941/* 1942 * Physical Error Diagnosis 1943 */ 1944register PERRDIAG { 1945 address 0x04E 1946 access_mode RO 1947 modes M_DFF0, M_DFF1, M_SCSI 1948 field HIZERO 0x80 1949 field HIPERR 0x40 1950 field PREVPHASE 0x20 1951 field PARITYERR 0x10 1952 field AIPERR 0x08 1953 field CRCERR 0x04 1954 field DGFORMERR 0x02 1955 field DTERR 0x01 1956} 1957 1958/* 1959 * LQI Manager Current State 1960 */ 1961register LQISTATE { 1962 address 0x04E 1963 access_mode RO 1964 modes M_CFG 1965} 1966 1967/* 1968 * SCSI Offset Count 1969 */ 1970register SOFFCNT { 1971 address 0x04F 1972 access_mode RO 1973 modes M_DFF0, M_DFF1, M_SCSI 1974} 1975 1976/* 1977 * LQO Manager Current State 1978 */ 1979register LQOSTATE { 1980 address 0x04F 1981 access_mode RO 1982 modes M_CFG 1983} 1984 1985/* 1986 * LQI Manager Status 1987 */ 1988register LQISTAT0 { 1989 address 0x050 1990 access_mode RO 1991 modes M_DFF0, M_DFF1, M_SCSI 1992 field LQIATNQAS 0x20 1993 field LQICRCT1 0x10 1994 field LQICRCT2 0x08 1995 field LQIBADLQT 0x04 1996 field LQIATNLQ 0x02 1997 field LQIATNCMD 0x01 1998} 1999 2000/* 2001 * Clear LQI Interrupts 0 2002 */ 2003register CLRLQIINT0 { 2004 address 0x050 2005 access_mode WO 2006 modes M_DFF0, M_DFF1, M_SCSI 2007 field CLRLQIATNQAS 0x20 2008 field CLRLQICRCT1 0x10 2009 field CLRLQICRCT2 0x08 2010 field CLRLQIBADLQT 0x04 2011 field CLRLQIATNLQ 0x02 2012 field CLRLQIATNCMD 0x01 2013} 2014 2015/* 2016 * LQI Manager Interrupt Mode 0 2017 */ 2018register LQIMODE0 { 2019 address 0x050 2020 access_mode RW 2021 modes M_CFG 2022 field ENLQIATNQASK 0x20 2023 field ENLQICRCT1 0x10 2024 field ENLQICRCT2 0x08 2025 field ENLQIBADLQT 0x04 2026 field ENLQIATNLQ 0x02 2027 field ENLQIATNCMD 0x01 2028} 2029 2030/* 2031 * LQI Manager Status 1 2032 */ 2033register LQISTAT1 { 2034 address 0x051 2035 access_mode RO 2036 modes M_DFF0, M_DFF1, M_SCSI 2037 field LQIPHASE_LQ 0x80 2038 field LQIPHASE_NLQ 0x40 2039 field LQIABORT 0x20 2040 field LQICRCI_LQ 0x10 2041 field LQICRCI_NLQ 0x08 2042 field LQIBADLQI 0x04 2043 field LQIOVERI_LQ 0x02 2044 field LQIOVERI_NLQ 0x01 2045} 2046 2047/* 2048 * Clear LQI Manager Interrupts1 2049 */ 2050register CLRLQIINT1 { 2051 address 0x051 2052 access_mode WO 2053 modes M_DFF0, M_DFF1, M_SCSI 2054 field CLRLQIPHASE_LQ 0x80 2055 field CLRLQIPHASE_NLQ 0x40 2056 field CLRLIQABORT 0x20 2057 field CLRLQICRCI_LQ 0x10 2058 field CLRLQICRCI_NLQ 0x08 2059 field CLRLQIBADLQI 0x04 2060 field CLRLQIOVERI_LQ 0x02 2061 field CLRLQIOVERI_NLQ 0x01 2062} 2063 2064/* 2065 * LQI Manager Interrupt Mode 1 2066 */ 2067register LQIMODE1 { 2068 address 0x051 2069 access_mode RW 2070 modes M_CFG 2071 field ENLQIPHASE_LQ 0x80 /* LQIPHASE1 */ 2072 field ENLQIPHASE_NLQ 0x40 /* LQIPHASE2 */ 2073 field ENLIQABORT 0x20 2074 field ENLQICRCI_LQ 0x10 /* LQICRCI1 */ 2075 field ENLQICRCI_NLQ 0x08 /* LQICRCI2 */ 2076 field ENLQIBADLQI 0x04 2077 field ENLQIOVERI_LQ 0x02 /* LQIOVERI1 */ 2078 field ENLQIOVERI_NLQ 0x01 /* LQIOVERI2 */ 2079} 2080 2081/* 2082 * LQI Manager Status 2 2083 */ 2084register LQISTAT2 { 2085 address 0x052 2086 access_mode RO 2087 modes M_DFF0, M_DFF1, M_SCSI 2088 field PACKETIZED 0x80 2089 field LQIPHASE_OUTPKT 0x40 2090 field LQIWORKONLQ 0x20 2091 field LQIWAITFIFO 0x10 2092 field LQISTOPPKT 0x08 2093 field LQISTOPLQ 0x04 2094 field LQISTOPCMD 0x02 2095 field LQIGSAVAIL 0x01 2096} 2097 2098/* 2099 * SCSI Status 3 2100 */ 2101register SSTAT3 { 2102 address 0x053 2103 access_mode RO 2104 modes M_DFF0, M_DFF1, M_SCSI 2105 field NTRAMPERR 0x02 2106 field OSRAMPERR 0x01 2107} 2108 2109/* 2110 * Clear SCSI Status 3 2111 */ 2112register CLRSINT3 { 2113 address 0x053 2114 access_mode WO 2115 modes M_DFF0, M_DFF1, M_SCSI 2116 field CLRNTRAMPERR 0x02 2117 field CLROSRAMPERR 0x01 2118} 2119 2120/* 2121 * SCSI Interrupt Mode 3 2122 */ 2123register SIMODE3 { 2124 address 0x053 2125 access_mode RW 2126 modes M_CFG 2127 field ENNTRAMPERR 0x02 2128 field ENOSRAMPERR 0x01 2129} 2130 2131/* 2132 * LQO Manager Status 0 2133 */ 2134register LQOSTAT0 { 2135 address 0x054 2136 access_mode RO 2137 modes M_DFF0, M_DFF1, M_SCSI 2138 field LQOTARGSCBPERR 0x10 2139 field LQOSTOPT2 0x08 2140 field LQOATNLQ 0x04 2141 field LQOATNPKT 0x02 2142 field LQOTCRC 0x01 2143} 2144 2145/* 2146 * Clear LQO Manager interrupt 0 2147 */ 2148register CLRLQOINT0 { 2149 address 0x054 2150 access_mode WO 2151 modes M_DFF0, M_DFF1, M_SCSI 2152 field CLRLQOTARGSCBPERR 0x10 2153 field CLRLQOSTOPT2 0x08 2154 field CLRLQOATNLQ 0x04 2155 field CLRLQOATNPKT 0x02 2156 field CLRLQOTCRC 0x01 2157} 2158 2159/* 2160 * LQO Manager Interrupt Mode 0 2161 */ 2162register LQOMODE0 { 2163 address 0x054 2164 access_mode RW 2165 modes M_CFG 2166 field ENLQOTARGSCBPERR 0x10 2167 field ENLQOSTOPT2 0x08 2168 field ENLQOATNLQ 0x04 2169 field ENLQOATNPKT 0x02 2170 field ENLQOTCRC 0x01 2171} 2172 2173/* 2174 * LQO Manager Status 1 2175 */ 2176register LQOSTAT1 { 2177 address 0x055 2178 access_mode RO 2179 modes M_DFF0, M_DFF1, M_SCSI 2180 field LQOINITSCBPERR 0x10 2181 field LQOSTOPI2 0x08 2182 field LQOBADQAS 0x04 2183 field LQOBUSFREE 0x02 2184 field LQOPHACHGINPKT 0x01 2185} 2186 2187/* 2188 * Clear LOQ Interrupt 1 2189 */ 2190register CLRLQOINT1 { 2191 address 0x055 2192 access_mode WO 2193 modes M_DFF0, M_DFF1, M_SCSI 2194 field CLRLQOINITSCBPERR 0x10 2195 field CLRLQOSTOPI2 0x08 2196 field CLRLQOBADQAS 0x04 2197 field CLRLQOBUSFREE 0x02 2198 field CLRLQOPHACHGINPKT 0x01 2199} 2200 2201/* 2202 * LQO Manager Interrupt Mode 1 2203 */ 2204register LQOMODE1 { 2205 address 0x055 2206 access_mode RW 2207 modes M_CFG 2208 field ENLQOINITSCBPERR 0x10 2209 field ENLQOSTOPI2 0x08 2210 field ENLQOBADQAS 0x04 2211 field ENLQOBUSFREE 0x02 2212 field ENLQOPHACHGINPKT 0x01 2213} 2214 2215/* 2216 * LQO Manager Status 2 2217 */ 2218register LQOSTAT2 { 2219 address 0x056 2220 access_mode RO 2221 modes M_DFF0, M_DFF1, M_SCSI 2222 field LQOPKT 0xE0 2223 field LQOWAITFIFO 0x10 2224 field LQOPHACHGOUTPKT 0x02 /* outside of packet boundaries. */ 2225 field LQOSTOP0 0x01 /* Stopped after sending all packets */ 2226} 2227 2228/* 2229 * Output Synchronizer Space Count 2230 */ 2231register OS_SPACE_CNT { 2232 address 0x056 2233 access_mode RO 2234 modes M_CFG 2235} 2236 2237/* 2238 * SCSI Interrupt Mode 1 2239 * Setting any bit will enable the corresponding function 2240 * in SIMODE1 to interrupt via the IRQ pin. 2241 */ 2242register SIMODE1 { 2243 address 0x057 2244 access_mode RW 2245 modes M_DFF0, M_DFF1, M_SCSI 2246 field ENSELTIMO 0x80 2247 field ENATNTARG 0x40 2248 field ENSCSIRST 0x20 2249 field ENPHASEMIS 0x10 2250 field ENBUSFREE 0x08 2251 field ENSCSIPERR 0x04 2252 field ENSTRB2FAST 0x02 2253 field ENREQINIT 0x01 2254} 2255 2256/* 2257 * Good Status FIFO 2258 */ 2259register GSFIFO { 2260 address 0x058 2261 access_mode RO 2262 size 2 2263 modes M_DFF0, M_DFF1, M_SCSI 2264} 2265 2266/* 2267 * Data FIFO SCSI Transfer Control 2268 */ 2269register DFFSXFRCTL { 2270 address 0x05A 2271 access_mode RW 2272 modes M_DFF0, M_DFF1 2273 field DFFBITBUCKET 0x08 2274 field CLRSHCNT 0x04 2275 field CLRCHN 0x02 2276 field RSTCHN 0x01 2277} 2278 2279/* 2280 * Next SCSI Control Block 2281 */ 2282register NEXTSCB { 2283 address 0x05A 2284 access_mode RW 2285 size 2 2286 modes M_SCSI 2287} 2288 2289/* Rev B only. */ 2290register LQOSCSCTL { 2291 address 0x05A 2292 access_mode RW 2293 size 1 2294 modes M_CFG 2295 field LQOH2A_VERSION 0x80 2296 field LQONOCHKOVER 0x01 2297} 2298 2299/* 2300 * SEQ Interrupts 2301 */ 2302register SEQINTSRC { 2303 address 0x05B 2304 access_mode RO 2305 modes M_DFF0, M_DFF1 2306 field CTXTDONE 0x40 2307 field SAVEPTRS 0x20 2308 field CFG4DATA 0x10 2309 field CFG4ISTAT 0x08 2310 field CFG4TSTAT 0x04 2311 field CFG4ICMD 0x02 2312 field CFG4TCMD 0x01 2313} 2314 2315/* 2316 * Clear Arp Interrupts 2317 */ 2318register CLRSEQINTSRC { 2319 address 0x05B 2320 access_mode WO 2321 modes M_DFF0, M_DFF1 2322 field CLRCTXTDONE 0x40 2323 field CLRSAVEPTRS 0x20 2324 field CLRCFG4DATA 0x10 2325 field CLRCFG4ISTAT 0x08 2326 field CLRCFG4TSTAT 0x04 2327 field CLRCFG4ICMD 0x02 2328 field CLRCFG4TCMD 0x01 2329} 2330 2331/* 2332 * SEQ Interrupt Enabled (Shared) 2333 */ 2334register SEQIMODE { 2335 address 0x05C 2336 access_mode RW 2337 modes M_DFF0, M_DFF1 2338 field ENCTXTDONE 0x40 2339 field ENSAVEPTRS 0x20 2340 field ENCFG4DATA 0x10 2341 field ENCFG4ISTAT 0x08 2342 field ENCFG4TSTAT 0x04 2343 field ENCFG4ICMD 0x02 2344 field ENCFG4TCMD 0x01 2345} 2346 2347/* 2348 * Current SCSI Control Block 2349 */ 2350register CURRSCB { 2351 address 0x05C 2352 access_mode RW 2353 size 2 2354 modes M_SCSI 2355} 2356 2357/* 2358 * Data FIFO Status 2359 */ 2360register MDFFSTAT { 2361 address 0x05D 2362 access_mode RO 2363 modes M_DFF0, M_DFF1 2364 field SHCNTNEGATIVE 0x40 /* Rev B or higher */ 2365 field SHCNTMINUS1 0x20 /* Rev B or higher */ 2366 field LASTSDONE 0x10 2367 field SHVALID 0x08 2368 field DLZERO 0x04 /* FIFO data ends on packet boundary. */ 2369 field DATAINFIFO 0x02 2370 field FIFOFREE 0x01 2371} 2372 2373/* 2374 * CRC Control 2375 */ 2376register CRCCONTROL { 2377 address 0x05d 2378 access_mode RW 2379 modes M_CFG 2380 field CRCVALCHKEN 0x40 2381} 2382 2383/* 2384 * SCSI Test Control 2385 */ 2386register SCSITEST { 2387 address 0x05E 2388 access_mode RW 2389 modes M_CFG 2390 field CNTRTEST 0x08 2391 field SEL_TXPLL_DEBUG 0x04 2392} 2393 2394/* 2395 * Data FIFO Queue Tag 2396 */ 2397register DFFTAG { 2398 address 0x05E 2399 access_mode RW 2400 size 2 2401 modes M_DFF0, M_DFF1 2402} 2403 2404/* 2405 * Last SCSI Control Block 2406 */ 2407register LASTSCB { 2408 address 0x05E 2409 access_mode RW 2410 size 2 2411 modes M_SCSI 2412} 2413 2414/* 2415 * SCSI I/O Cell Power-down Control 2416 */ 2417register IOPDNCTL { 2418 address 0x05F 2419 access_mode RW 2420 modes M_CFG 2421 field DISABLE_OE 0x80 2422 field PDN_IDIST 0x04 2423 field PDN_DIFFSENSE 0x01 2424} 2425 2426/* 2427 * Shadow Host Address. 2428 */ 2429register SHADDR { 2430 address 0x060 2431 access_mode RO 2432 size 8 2433 modes M_DFF0, M_DFF1 2434} 2435 2436/* 2437 * Data Group CRC Interval. 2438 */ 2439register DGRPCRCI { 2440 address 0x060 2441 access_mode RW 2442 size 2 2443 modes M_CFG 2444} 2445 2446/* 2447 * Data Transfer Negotiation Address 2448 */ 2449register NEGOADDR { 2450 address 0x060 2451 access_mode RW 2452 modes M_SCSI 2453} 2454 2455/* 2456 * Data Transfer Negotiation Data - Period Byte 2457 */ 2458register NEGPERIOD { 2459 address 0x061 2460 access_mode RW 2461 modes M_SCSI 2462} 2463 2464/* 2465 * Packetized CRC Interval 2466 */ 2467register PACKCRCI { 2468 address 0x062 2469 access_mode RW 2470 size 2 2471 modes M_CFG 2472} 2473 2474/* 2475 * Data Transfer Negotiation Data - Offset Byte 2476 */ 2477register NEGOFFSET { 2478 address 0x062 2479 access_mode RW 2480 modes M_SCSI 2481} 2482 2483/* 2484 * Data Transfer Negotiation Data - PPR Options 2485 */ 2486register NEGPPROPTS { 2487 address 0x063 2488 access_mode RW 2489 modes M_SCSI 2490 field PPROPT_PACE 0x08 2491 field PPROPT_QAS 0x04 2492 field PPROPT_DT 0x02 2493 field PPROPT_IUT 0x01 2494} 2495 2496/* 2497 * Data Transfer Negotiation Data - Connection Options 2498 */ 2499register NEGCONOPTS { 2500 address 0x064 2501 access_mode RW 2502 modes M_SCSI 2503 field ENSNAPSHOT 0x40 2504 field RTI_WRTDIS 0x20 2505 field RTI_OVRDTRN 0x10 2506 field ENSLOWCRC 0x08 2507 field ENAUTOATNI 0x04 2508 field ENAUTOATNO 0x02 2509 field WIDEXFER 0x01 2510} 2511 2512/* 2513 * Negotiation Table Annex Column Index. 2514 */ 2515register ANNEXCOL { 2516 address 0x065 2517 access_mode RW 2518 modes M_SCSI 2519} 2520 2521register SCSCHKN { 2522 address 0x066 2523 access_mode RW 2524 modes M_CFG 2525 field STSELSKIDDIS 0x40 2526 field CURRFIFODEF 0x20 2527 field WIDERESEN 0x10 2528 field SDONEMSKDIS 0x08 2529 field DFFACTCLR 0x04 2530 field SHVALIDSTDIS 0x02 2531 field LSTSGCLRDIS 0x01 2532} 2533 2534const AHD_ANNEXCOL_PER_DEV0 4 2535const AHD_NUM_PER_DEV_ANNEXCOLS 4 2536const AHD_ANNEXCOL_PRECOMP_SLEW 4 2537const AHD_PRECOMP_MASK 0x07 2538const AHD_PRECOMP_SHIFT 0 2539const AHD_PRECOMP_CUTBACK_17 0x04 2540const AHD_PRECOMP_CUTBACK_29 0x06 2541const AHD_PRECOMP_CUTBACK_37 0x07 2542const AHD_SLEWRATE_MASK 0x78 2543const AHD_SLEWRATE_SHIFT 3 2544/* 2545 * Rev A has only a single bit (high bit of field) of slew adjustment. 2546 * Rev B has 4 bits. The current default happens to be the same for both. 2547 */ 2548const AHD_SLEWRATE_DEF_REVA 0x08 2549const AHD_SLEWRATE_DEF_REVB 0x08 2550 2551/* Rev A does not have any amplitude setting. */ 2552const AHD_ANNEXCOL_AMPLITUDE 6 2553const AHD_AMPLITUDE_MASK 0x7 2554const AHD_AMPLITUDE_SHIFT 0 2555const AHD_AMPLITUDE_DEF 0x7 2556 2557/* 2558 * Negotiation Table Annex Data Port. 2559 */ 2560register ANNEXDAT { 2561 address 0x066 2562 access_mode RW 2563 modes M_SCSI 2564} 2565 2566/* 2567 * Initiator's Own Id. 2568 * The SCSI ID to use for Selection Out and seen during a reselection.. 2569 */ 2570register IOWNID { 2571 address 0x067 2572 access_mode RW 2573 modes M_SCSI 2574} 2575 2576/* 2577 * 960MHz Phase-Locked Loop Control 0 2578 */ 2579register PLL960CTL0 { 2580 address 0x068 2581 access_mode RW 2582 modes M_CFG 2583 field PLL_VCOSEL 0x80 2584 field PLL_PWDN 0x40 2585 field PLL_NS 0x30 2586 field PLL_ENLUD 0x08 2587 field PLL_ENLPF 0x04 2588 field PLL_DLPF 0x02 2589 field PLL_ENFBM 0x01 2590} 2591 2592/* 2593 * Target Own Id 2594 */ 2595register TOWNID { 2596 address 0x069 2597 access_mode RW 2598 modes M_SCSI 2599} 2600 2601/* 2602 * 960MHz Phase-Locked Loop Control 1 2603 */ 2604register PLL960CTL1 { 2605 address 0x069 2606 access_mode RW 2607 modes M_CFG 2608 field PLL_CNTEN 0x80 2609 field PLL_CNTCLR 0x40 2610 field PLL_RST 0x01 2611} 2612 2613/* 2614 * Expander Signature 2615 */ 2616register XSIG { 2617 address 0x06A 2618 access_mode RW 2619 modes M_SCSI 2620} 2621 2622/* 2623 * Shadow Byte Count 2624 */ 2625register SHCNT { 2626 address 0x068 2627 access_mode RW 2628 size 3 2629 modes M_DFF0, M_DFF1 2630} 2631 2632/* 2633 * Selection Out ID 2634 */ 2635register SELOID { 2636 address 0x06B 2637 access_mode RW 2638 modes M_SCSI 2639} 2640 2641/* 2642 * 960-MHz Phase-Locked Loop Test Count 2643 */ 2644register PLL960CNT0 { 2645 address 0x06A 2646 access_mode RO 2647 size 2 2648 modes M_CFG 2649} 2650 2651/* 2652 * 400-MHz Phase-Locked Loop Control 0 2653 */ 2654register PLL400CTL0 { 2655 address 0x06C 2656 access_mode RW 2657 modes M_CFG 2658 field PLL_VCOSEL 0x80 2659 field PLL_PWDN 0x40 2660 field PLL_NS 0x30 2661 field PLL_ENLUD 0x08 2662 field PLL_ENLPF 0x04 2663 field PLL_DLPF 0x02 2664 field PLL_ENFBM 0x01 2665} 2666 2667/* 2668 * Arbitration Fairness 2669 */ 2670register FAIRNESS { 2671 address 0x06C 2672 access_mode RW 2673 size 2 2674 modes M_SCSI 2675} 2676 2677/* 2678 * 400-MHz Phase-Locked Loop Control 1 2679 */ 2680register PLL400CTL1 { 2681 address 0x06D 2682 access_mode RW 2683 modes M_CFG 2684 field PLL_CNTEN 0x80 2685 field PLL_CNTCLR 0x40 2686 field PLL_RST 0x01 2687} 2688 2689/* 2690 * Arbitration Unfairness 2691 */ 2692register UNFAIRNESS { 2693 address 0x06E 2694 access_mode RW 2695 size 2 2696 modes M_SCSI 2697} 2698 2699/* 2700 * 400-MHz Phase-Locked Loop Test Count 2701 */ 2702register PLL400CNT0 { 2703 address 0x06E 2704 access_mode RO 2705 size 2 2706 modes M_CFG 2707} 2708 2709/* 2710 * SCB Page Pointer 2711 */ 2712register SCBPTR { 2713 address 0x0A8 2714 access_mode RW 2715 size 2 2716 modes M_DFF0, M_DFF1, M_CCHAN, M_SCSI 2717} 2718 2719/* 2720 * CMC SCB Array Count 2721 * Number of bytes to transfer between CMC SCB memory and SCBRAM. 2722 * Transfers must be 8byte aligned and sized. 2723 */ 2724register CCSCBACNT { 2725 address 0x0AB 2726 access_mode RW 2727 modes M_CCHAN 2728} 2729 2730/* 2731 * SCB Autopointer 2732 * SCB-Next Address Snooping logic. When an SCB is transferred to 2733 * the card, the next SCB address to be used by the CMC array can 2734 * be autoloaded from that transfer. 2735 */ 2736register SCBAUTOPTR { 2737 address 0x0AB 2738 access_mode RW 2739 modes M_CFG 2740 field AUSCBPTR_EN 0x80 2741 field SCBPTR_ADDR 0x38 2742 field SCBPTR_OFF 0x07 2743} 2744 2745/* 2746 * CMC SG Ram Address Pointer 2747 */ 2748register CCSGADDR { 2749 address 0x0AC 2750 access_mode RW 2751 modes M_DFF0, M_DFF1 2752} 2753 2754/* 2755 * CMC SCB RAM Address Pointer 2756 */ 2757register CCSCBADDR { 2758 address 0x0AC 2759 access_mode RW 2760 modes M_CCHAN 2761} 2762 2763/* 2764 * CMC SCB Ram Back-up Address Pointer 2765 * Indicates the true stop location of transfers halted prior 2766 * to SCBHCNT going to 0. 2767 */ 2768register CCSCBADR_BK { 2769 address 0x0AC 2770 access_mode RO 2771 modes M_CFG 2772} 2773 2774/* 2775 * CMC SG Control 2776 */ 2777register CCSGCTL { 2778 address 0x0AD 2779 access_mode RW 2780 modes M_DFF0, M_DFF1 2781 field CCSGDONE 0x80 2782 field SG_CACHE_AVAIL 0x10 2783 field CCSGENACK 0x08 2784 mask CCSGEN 0x0C 2785 field SG_FETCH_REQ 0x02 2786 field CCSGRESET 0x01 2787} 2788 2789/* 2790 * CMD SCB Control 2791 */ 2792register CCSCBCTL { 2793 address 0x0AD 2794 access_mode RW 2795 modes M_CCHAN 2796 field CCSCBDONE 0x80 2797 field ARRDONE 0x40 2798 field CCARREN 0x10 2799 field CCSCBEN 0x08 2800 field CCSCBDIR 0x04 2801 field CCSCBRESET 0x01 2802} 2803 2804/* 2805 * CMC Ram BIST 2806 */ 2807register CMC_RAMBIST { 2808 address 0x0AD 2809 access_mode RW 2810 modes M_CFG 2811 field SG_ELEMENT_SIZE 0x80 2812 field SCBRAMBIST_FAIL 0x40 2813 field SG_BIST_FAIL 0x20 2814 field SG_BIST_EN 0x10 2815 field CMC_BUFFER_BIST_FAIL 0x02 2816 field CMC_BUFFER_BIST_EN 0x01 2817} 2818 2819/* 2820 * CMC SG RAM Data Port 2821 */ 2822register CCSGRAM { 2823 address 0x0B0 2824 access_mode RW 2825 modes M_DFF0, M_DFF1 2826} 2827 2828/* 2829 * CMC SCB RAM Data Port 2830 */ 2831register CCSCBRAM { 2832 address 0x0B0 2833 access_mode RW 2834 modes M_CCHAN 2835} 2836 2837/* 2838 * Flex DMA Address. 2839 */ 2840register FLEXADR { 2841 address 0x0B0 2842 access_mode RW 2843 size 3 2844 modes M_SCSI 2845} 2846 2847/* 2848 * Flex DMA Byte Count 2849 */ 2850register FLEXCNT { 2851 address 0x0B3 2852 access_mode RW 2853 size 2 2854 modes M_SCSI 2855} 2856 2857/* 2858 * Flex DMA Status 2859 */ 2860register FLEXDMASTAT { 2861 address 0x0B5 2862 access_mode RW 2863 modes M_SCSI 2864 field FLEXDMAERR 0x02 2865 field FLEXDMADONE 0x01 2866} 2867 2868/* 2869 * Flex DMA Data Port 2870 */ 2871register FLEXDATA { 2872 address 0x0B6 2873 access_mode RW 2874 modes M_SCSI 2875} 2876 2877/* 2878 * Board Data 2879 */ 2880register BRDDAT { 2881 address 0x0B8 2882 access_mode RW 2883 modes M_SCSI 2884} 2885 2886/* 2887 * Board Control 2888 */ 2889register BRDCTL { 2890 address 0x0B9 2891 access_mode RW 2892 modes M_SCSI 2893 field FLXARBACK 0x80 2894 field FLXARBREQ 0x40 2895 field BRDADDR 0x38 2896 field BRDEN 0x04 2897 field BRDRW 0x02 2898 field BRDSTB 0x01 2899} 2900 2901/* 2902 * Serial EEPROM Address 2903 */ 2904register SEEADR { 2905 address 0x0BA 2906 access_mode RW 2907 modes M_SCSI 2908} 2909 2910/* 2911 * Serial EEPROM Data 2912 */ 2913register SEEDAT { 2914 address 0x0BC 2915 access_mode RW 2916 size 2 2917 modes M_SCSI 2918} 2919 2920/* 2921 * Serial EEPROM Status 2922 */ 2923register SEESTAT { 2924 address 0x0BE 2925 access_mode RO 2926 modes M_SCSI 2927 field INIT_DONE 0x80 2928 field SEEOPCODE 0x70 2929 field LDALTID_L 0x08 2930 field SEEARBACK 0x04 2931 field SEEBUSY 0x02 2932 field SEESTART 0x01 2933} 2934 2935/* 2936 * Serial EEPROM Control 2937 */ 2938register SEECTL { 2939 address 0x0BE 2940 access_mode RW 2941 modes M_SCSI 2942 field SEEOPCODE 0x70 { 2943 SEEOP_ERASE 0x70, 2944 SEEOP_READ 0x60, 2945 SEEOP_WRITE 0x50, 2946 /* 2947 * The following four commands use special 2948 * addresses for differentiation. 2949 */ 2950 SEEOP_ERAL 0x40 2951 } 2952 mask SEEOP_EWEN 0x40 2953 mask SEEOP_WALL 0x40 2954 mask SEEOP_EWDS 0x40 2955 field SEERST 0x02 2956 field SEESTART 0x01 2957} 2958 2959const SEEOP_ERAL_ADDR 0x80 2960const SEEOP_EWEN_ADDR 0xC0 2961const SEEOP_WRAL_ADDR 0x40 2962const SEEOP_EWDS_ADDR 0x00 2963 2964/* 2965 * SCB Counter 2966 */ 2967register SCBCNT { 2968 address 0x0BF 2969 access_mode RW 2970 modes M_SCSI 2971} 2972 2973/* 2974 * Data FIFO Write Address 2975 * Pointer to the next QWD location to be written to the data FIFO. 2976 */ 2977register DFWADDR { 2978 address 0x0C0 2979 access_mode RW 2980 size 2 2981 modes M_DFF0, M_DFF1 2982} 2983 2984/* 2985 * DSP Filter Control 2986 */ 2987register DSPFLTRCTL { 2988 address 0x0C0 2989 access_mode RW 2990 modes M_CFG 2991 field FLTRDISABLE 0x20 2992 field EDGESENSE 0x10 2993 field DSPFCNTSEL 0x0F 2994} 2995 2996/* 2997 * DSP Data Channel Control 2998 */ 2999register DSPDATACTL { 3000 address 0x0C1 3001 access_mode RW 3002 modes M_CFG 3003 field BYPASSENAB 0x80 3004 field DESQDIS 0x10 3005 field RCVROFFSTDIS 0x04 3006 field XMITOFFSTDIS 0x02 3007} 3008 3009/* 3010 * Data FIFO Read Address 3011 * Pointer to the next QWD location to be read from the data FIFO. 3012 */ 3013register DFRADDR { 3014 address 0x0C2 3015 access_mode RW 3016 size 2 3017 modes M_DFF0, M_DFF1 3018} 3019 3020/* 3021 * DSP REQ Control 3022 */ 3023register DSPREQCTL { 3024 address 0x0C2 3025 access_mode RW 3026 modes M_CFG 3027 field MANREQCTL 0xC0 3028 field MANREQDLY 0x3F 3029} 3030 3031/* 3032 * DSP ACK Control 3033 */ 3034register DSPACKCTL { 3035 address 0x0C3 3036 access_mode RW 3037 modes M_CFG 3038 field MANACKCTL 0xC0 3039 field MANACKDLY 0x3F 3040} 3041 3042/* 3043 * Data FIFO Data 3044 * Read/Write byte port into the data FIFO. The read and write 3045 * FIFO pointers increment with each read and write respectively 3046 * to this port. 3047 */ 3048register DFDAT { 3049 address 0x0C4 3050 access_mode RW 3051 modes M_DFF0, M_DFF1 3052} 3053 3054/* 3055 * DSP Channel Select 3056 */ 3057register DSPSELECT { 3058 address 0x0C4 3059 access_mode RW 3060 modes M_CFG 3061 field AUTOINCEN 0x80 3062 field DSPSEL 0x1F 3063} 3064 3065const NUMDSPS 0x14 3066 3067/* 3068 * Write Bias Control 3069 */ 3070register WRTBIASCTL { 3071 address 0x0C5 3072 access_mode WO 3073 modes M_CFG 3074 field AUTOXBCDIS 0x80 3075 field XMITMANVAL 0x3F 3076} 3077 3078/* 3079 * Currently the WRTBIASCTL is the same as the default. 3080 */ 3081const WRTBIASCTL_HP_DEFAULT 0x0 3082 3083/* 3084 * Receiver Bias Control 3085 */ 3086register RCVRBIOSCTL { 3087 address 0x0C6 3088 access_mode WO 3089 modes M_CFG 3090 field AUTORBCDIS 0x80 3091 field RCVRMANVAL 0x3F 3092} 3093 3094/* 3095 * Write Bias Calculator 3096 */ 3097register WRTBIASCALC { 3098 address 0x0C7 3099 access_mode RO 3100 modes M_CFG 3101} 3102 3103/* 3104 * Data FIFO Pointers 3105 * Contains the byte offset from DFWADDR and DWRADDR to the current 3106 * FIFO write/read locations. 3107 */ 3108register DFPTRS { 3109 address 0x0C8 3110 access_mode RW 3111 modes M_DFF0, M_DFF1 3112} 3113 3114/* 3115 * Receiver Bias Calculator 3116 */ 3117register RCVRBIASCALC { 3118 address 0x0C8 3119 access_mode RO 3120 modes M_CFG 3121} 3122 3123/* 3124 * Data FIFO Backup Read Pointer 3125 * Contains the data FIFO address to be restored if the last 3126 * data accessed from the data FIFO was not transferred successfully. 3127 */ 3128register DFBKPTR { 3129 address 0x0C9 3130 access_mode RW 3131 size 2 3132 modes M_DFF0, M_DFF1 3133} 3134 3135/* 3136 * Skew Calculator 3137 */ 3138register SKEWCALC { 3139 address 0x0C9 3140 access_mode RO 3141 modes M_CFG 3142} 3143 3144/* 3145 * Data FIFO Debug Control 3146 */ 3147register DFDBCTL { 3148 address 0x0CB 3149 access_mode RW 3150 modes M_DFF0, M_DFF1 3151 field DFF_CIO_WR_RDY 0x20 3152 field DFF_CIO_RD_RDY 0x10 3153 field DFF_DIR_ERR 0x08 3154 field DFF_RAMBIST_FAIL 0x04 3155 field DFF_RAMBIST_DONE 0x02 3156 field DFF_RAMBIST_EN 0x01 3157} 3158 3159/* 3160 * Data FIFO Space Count 3161 * Number of FIFO locations that are free. 3162 */ 3163register DFSCNT { 3164 address 0x0CC 3165 access_mode RO 3166 size 2 3167 modes M_DFF0, M_DFF1 3168} 3169 3170/* 3171 * Data FIFO Byte Count 3172 * Number of filled FIFO locations. 3173 */ 3174register DFBCNT { 3175 address 0x0CE 3176 access_mode RO 3177 size 2 3178 modes M_DFF0, M_DFF1 3179} 3180 3181/* 3182 * Sequencer Program Overlay Address. 3183 * Low address must be written prior to high address. 3184 */ 3185register OVLYADDR { 3186 address 0x0D4 3187 modes M_SCSI 3188 size 2 3189 access_mode RW 3190} 3191 3192/* 3193 * Sequencer Control 0 3194 * Error detection mode, speed configuration, 3195 * single step, breakpoints and program load. 3196 */ 3197register SEQCTL0 { 3198 address 0x0D6 3199 access_mode RW 3200 field PERRORDIS 0x80 3201 field PAUSEDIS 0x40 3202 field FAILDIS 0x20 3203 field FASTMODE 0x10 3204 field BRKADRINTEN 0x08 3205 field STEP 0x04 3206 field SEQRESET 0x02 3207 field LOADRAM 0x01 3208} 3209 3210/* 3211 * Sequencer Control 1 3212 * Instruction RAM Diagnostics 3213 */ 3214register SEQCTL1 { 3215 address 0x0D7 3216 access_mode RW 3217 field OVRLAY_DATA_CHK 0x08 3218 field RAMBIST_DONE 0x04 3219 field RAMBIST_FAIL 0x02 3220 field RAMBIST_EN 0x01 3221} 3222 3223/* 3224 * Sequencer Flags 3225 * Zero and Carry state of the ALU. 3226 */ 3227register FLAGS { 3228 address 0x0D8 3229 access_mode RO 3230 field ZERO 0x02 3231 field CARRY 0x01 3232} 3233 3234/* 3235 * Sequencer Interrupt Control 3236 */ 3237register SEQINTCTL { 3238 address 0x0D9 3239 access_mode RW 3240 field INTVEC1DSL 0x80 3241 field INT1_CONTEXT 0x20 3242 field SCS_SEQ_INT1M1 0x10 3243 field SCS_SEQ_INT1M0 0x08 3244 field INTMASK2 0x04 3245 field INTMASK1 0x02 3246 field IRET 0x01 3247} 3248 3249/* 3250 * Sequencer RAM Data Port 3251 * Single byte window into the Sequencer Instruction Ram area starting 3252 * at the address specified by OVLYADDR. To write a full instruction word, 3253 * simply write four bytes in succession. OVLYADDR will increment after the 3254 * most significant instrution byte (the byte with the parity bit) is written. 3255 */ 3256register SEQRAM { 3257 address 0x0DA 3258 access_mode RW 3259} 3260 3261/* 3262 * Sequencer Program Counter 3263 * Low byte must be written prior to high byte. 3264 */ 3265register PRGMCNT { 3266 address 0x0DE 3267 access_mode RW 3268 size 2 3269} 3270 3271/* 3272 * Accumulator 3273 */ 3274register ACCUM { 3275 address 0x0E0 3276 access_mode RW 3277 accumulator 3278} 3279 3280/* 3281 * Source Index Register 3282 * Incrementing index for reads of SINDIR and the destination (low byte only) 3283 * for any immediate operands passed in jmp, jc, jnc, call instructions. 3284 * Example: 3285 * mvi 0xFF call some_routine; 3286 * 3287 * Will set SINDEX[0] to 0xFF and call the routine "some_routine. 3288 */ 3289register SINDEX { 3290 address 0x0E2 3291 access_mode RW 3292 size 2 3293 sindex 3294} 3295 3296/* 3297 * Destination Index Register 3298 * Incrementing index for writes to DINDIR. Can be used as a scratch register. 3299 */ 3300register DINDEX { 3301 address 0x0E4 3302 access_mode RW 3303 size 2 3304} 3305 3306/* 3307 * Break Address 3308 * Sequencer instruction breakpoint address address. 3309 */ 3310register BRKADDR0 { 3311 address 0x0E6 3312 access_mode RW 3313} 3314 3315register BRKADDR1 { 3316 address 0x0E6 3317 access_mode RW 3318 field BRKDIS 0x80 /* Disable Breakpoint */ 3319} 3320 3321/* 3322 * All Ones 3323 * All reads to this register return the value 0xFF. 3324 */ 3325register ALLONES { 3326 address 0x0E8 3327 access_mode RO 3328 allones 3329} 3330 3331/* 3332 * All Zeros 3333 * All reads to this register return the value 0. 3334 */ 3335register ALLZEROS { 3336 address 0x0EA 3337 access_mode RO 3338 allzeros 3339} 3340 3341/* 3342 * No Destination 3343 * Writes to this register have no effect. 3344 */ 3345register NONE { 3346 address 0x0EA 3347 access_mode WO 3348 none 3349} 3350 3351/* 3352 * Source Index Indirect 3353 * Reading this register is equivalent to reading (register_base + SINDEX) and 3354 * incrementing SINDEX by 1. 3355 */ 3356register SINDIR { 3357 address 0x0EC 3358 access_mode RO 3359} 3360 3361/* 3362 * Destination Index Indirect 3363 * Writing this register is equivalent to writing to (register_base + DINDEX) 3364 * and incrementing DINDEX by 1. 3365 */ 3366register DINDIR { 3367 address 0x0ED 3368 access_mode WO 3369} 3370 3371/* 3372 * Function One 3373 * 2's complement to bit value conversion. Write the 2's complement value 3374 * (0-7 only) to the top nibble and retrieve the bit indexed by that value 3375 * on the next read of this register. 3376 * Example: 3377 * Write 0x60 3378 * Read 0x40 3379 */ 3380register FUNCTION1 { 3381 address 0x0F0 3382 access_mode RW 3383} 3384 3385/* 3386 * Stack 3387 * Window into the stack. Each stack location is 10 bits wide reported 3388 * low byte followed by high byte. There are 8 stack locations. 3389 */ 3390register STACK { 3391 address 0x0F2 3392 access_mode RW 3393} 3394 3395/* 3396 * Interrupt Vector 1 Address 3397 * Interrupt branch address for SCS SEQ_INT1 mode 0 and 1 interrupts. 3398 */ 3399register INTVEC1_ADDR { 3400 address 0x0F4 3401 access_mode RW 3402 size 2 3403 modes M_CFG 3404} 3405 3406/* 3407 * Current Address 3408 * Address of the SEQRAM instruction currently executing instruction. 3409 */ 3410register CURADDR { 3411 address 0x0F4 3412 access_mode RW 3413 size 2 3414 modes M_SCSI 3415} 3416 3417/* 3418 * Interrupt Vector 2 Address 3419 * Interrupt branch address for HST_SEQ_INT2 interrupts. 3420 */ 3421register INTVEC2_ADDR { 3422 address 0x0F6 3423 access_mode RW 3424 size 2 3425 modes M_CFG 3426} 3427 3428/* 3429 * Last Address 3430 * Address of the SEQRAM instruction executed prior to the current instruction. 3431 */ 3432register LASTADDR { 3433 address 0x0F6 3434 access_mode RW 3435 size 2 3436 modes M_SCSI 3437} 3438 3439register AHD_PCI_CONFIG_BASE { 3440 address 0x100 3441 access_mode RW 3442 size 256 3443 modes M_CFG 3444} 3445 3446/* ---------------------- Scratch RAM Offsets ------------------------- */ 3447scratch_ram { 3448 /* Mode Specific */ 3449 address 0x0A0 3450 size 8 3451 modes 0, 1, 2, 3 3452 REG0 { 3453 size 2 3454 } 3455 REG1 { 3456 size 2 3457 } 3458 REG_ISR { 3459 size 2 3460 } 3461 SG_STATE { 3462 size 1 3463 field SEGS_AVAIL 0x01 3464 field LOADING_NEEDED 0x02 3465 field FETCH_INPROG 0x04 3466 } 3467 /* 3468 * Track whether the transfer byte count for 3469 * the current data phase is odd. 3470 */ 3471 DATA_COUNT_ODD { 3472 size 1 3473 } 3474} 3475 3476scratch_ram { 3477 /* Mode Specific */ 3478 address 0x0F8 3479 size 8 3480 modes 0, 1, 2, 3 3481 LONGJMP_ADDR { 3482 size 2 3483 } 3484 ACCUM_SAVE { 3485 size 1 3486 } 3487} 3488 3489 3490scratch_ram { 3491 address 0x100 3492 size 128 3493 modes 0, 1, 2, 3 3494 /* 3495 * Per "other-id" execution queues. We use an array of 3496 * tail pointers into lists of SCBs sorted by "other-id". 3497 * The execution head pointer threads the head SCBs for 3498 * each list. 3499 */ 3500 WAITING_SCB_TAILS { 3501 size 32 3502 } 3503 WAITING_TID_HEAD { 3504 size 2 3505 } 3506 WAITING_TID_TAIL { 3507 size 2 3508 } 3509 /* 3510 * SCBID of the next SCB in the new SCB queue. 3511 */ 3512 NEXT_QUEUED_SCB_ADDR { 3513 size 4 3514 } 3515 /* 3516 * head of list of SCBs that have 3517 * completed but have not been 3518 * put into the qoutfifo. 3519 */ 3520 COMPLETE_SCB_HEAD { 3521 size 2 3522 } 3523 /* 3524 * The list of completed SCBs in 3525 * the active DMA. 3526 */ 3527 COMPLETE_SCB_DMAINPROG_HEAD { 3528 size 2 3529 } 3530 /* 3531 * head of list of SCBs that have 3532 * completed but need to be uploaded 3533 * to the host prior to being completed. 3534 */ 3535 COMPLETE_DMA_SCB_HEAD { 3536 size 2 3537 } 3538 /* 3539 * tail of list of SCBs that have 3540 * completed but need to be uploaded 3541 * to the host prior to being completed. 3542 */ 3543 COMPLETE_DMA_SCB_TAIL { 3544 size 2 3545 } 3546 /* 3547 * head of list of SCBs that have 3548 * been uploaded to the host, but cannot 3549 * be completed until the QFREEZE is in 3550 * full effect (i.e. no selections pending). 3551 */ 3552 COMPLETE_ON_QFREEZE_HEAD { 3553 size 2 3554 } 3555 /* 3556 * Counting semaphore to prevent new select-outs 3557 * The queue is frozen so long as the sequencer 3558 * and kernel freeze counts differ. 3559 */ 3560 QFREEZE_COUNT { 3561 size 2 3562 } 3563 KERNEL_QFREEZE_COUNT { 3564 size 2 3565 } 3566 /* 3567 * Mode to restore on legacy idle loop exit. 3568 */ 3569 SAVED_MODE { 3570 size 1 3571 } 3572 /* 3573 * Single byte buffer used to designate the type or message 3574 * to send to a target. 3575 */ 3576 MSG_OUT { 3577 size 1 3578 } 3579 /* Parameters for DMA Logic */ 3580 DMAPARAMS { 3581 size 1 3582 field PRELOADEN 0x80 3583 field WIDEODD 0x40 3584 field SCSIEN 0x20 3585 field SDMAEN 0x10 3586 field SDMAENACK 0x10 3587 field HDMAEN 0x08 3588 field HDMAENACK 0x08 3589 field DIRECTION 0x04 /* Set indicates PCI->SCSI */ 3590 field FIFOFLUSH 0x02 3591 field FIFORESET 0x01 3592 } 3593 SEQ_FLAGS { 3594 size 1 3595 field NOT_IDENTIFIED 0x80 3596 field NO_CDB_SENT 0x40 3597 field TARGET_CMD_IS_TAGGED 0x40 3598 field DPHASE 0x20 3599 /* Target flags */ 3600 field TARG_CMD_PENDING 0x10 3601 field CMDPHASE_PENDING 0x08 3602 field DPHASE_PENDING 0x04 3603 field SPHASE_PENDING 0x02 3604 field NO_DISCONNECT 0x01 3605 } 3606 /* 3607 * Temporary storage for the 3608 * target/channel/lun of a 3609 * reconnecting target 3610 */ 3611 SAVED_SCSIID { 3612 size 1 3613 } 3614 SAVED_LUN { 3615 size 1 3616 } 3617 /* 3618 * The last bus phase as seen by the sequencer. 3619 */ 3620 LASTPHASE { 3621 size 1 3622 field CDI 0x80 3623 field IOI 0x40 3624 field MSGI 0x20 3625 field P_BUSFREE 0x01 3626 enum PHASE_MASK CDO|IOO|MSGO { 3627 P_DATAOUT 0x0, 3628 P_DATAIN IOO, 3629 P_DATAOUT_DT P_DATAOUT|MSGO, 3630 P_DATAIN_DT P_DATAIN|MSGO, 3631 P_COMMAND CDO, 3632 P_MESGOUT CDO|MSGO, 3633 P_STATUS CDO|IOO, 3634 P_MESGIN CDO|IOO|MSGO 3635 } 3636 } 3637 /* 3638 * Value to "or" into the SCBPTR[1] value to 3639 * indicate that an entry in the QINFIFO is valid. 3640 */ 3641 QOUTFIFO_ENTRY_VALID_TAG { 3642 size 1 3643 } 3644 /* 3645 * Kernel and sequencer offsets into the queue of 3646 * incoming target mode command descriptors. The 3647 * queue is full when the KERNEL_TQINPOS == TQINPOS. 3648 */ 3649 KERNEL_TQINPOS { 3650 size 1 3651 } 3652 TQINPOS { 3653 size 1 3654 } 3655 /* 3656 * Base address of our shared data with the kernel driver in host 3657 * memory. This includes the qoutfifo and target mode 3658 * incoming command queue. 3659 */ 3660 SHARED_DATA_ADDR { 3661 size 4 3662 } 3663 /* 3664 * Pointer to location in host memory for next 3665 * position in the qoutfifo. 3666 */ 3667 QOUTFIFO_NEXT_ADDR { 3668 size 4 3669 } 3670 ARG_1 { 3671 size 1 3672 mask SEND_MSG 0x80 3673 mask SEND_SENSE 0x40 3674 mask SEND_REJ 0x20 3675 mask MSGOUT_PHASEMIS 0x10 3676 mask EXIT_MSG_LOOP 0x08 3677 mask CONT_MSG_LOOP_WRITE 0x04 3678 mask CONT_MSG_LOOP_READ 0x03 3679 mask CONT_MSG_LOOP_TARG 0x02 3680 alias RETURN_1 3681 } 3682 ARG_2 { 3683 size 1 3684 alias RETURN_2 3685 } 3686 3687 /* 3688 * Snapshot of MSG_OUT taken after each message is sent. 3689 */ 3690 LAST_MSG { 3691 size 1 3692 } 3693 3694 /* 3695 * Sequences the kernel driver has okayed for us. This allows 3696 * the driver to do things like prevent initiator or target 3697 * operations. 3698 */ 3699 SCSISEQ_TEMPLATE { 3700 size 1 3701 field MANUALCTL 0x40 3702 field ENSELI 0x20 3703 field ENRSELI 0x10 3704 field MANUALP 0x0C 3705 field ENAUTOATNP 0x02 3706 field ALTSTIM 0x01 3707 } 3708 3709 /* 3710 * The initiator specified tag for this target mode transaction. 3711 */ 3712 INITIATOR_TAG { 3713 size 1 3714 } 3715 3716 SEQ_FLAGS2 { 3717 size 1 3718 field PENDING_MK_MESSAGE 0x01 3719 field TARGET_MSG_PENDING 0x02 3720 field SELECTOUT_QFROZEN 0x04 3721 } 3722 3723 ALLOCFIFO_SCBPTR { 3724 size 2 3725 } 3726 3727 /* 3728 * The maximum amount of time to wait, when interrupt coalescing 3729 * is enabled, before issuing a CMDCMPLT interrupt for a completed 3730 * command. 3731 */ 3732 INT_COALESCING_TIMER { 3733 size 2 3734 } 3735 3736 /* 3737 * The maximum number of commands to coalesce into a single interrupt. 3738 * Actually the 2's complement of that value to simplify sequencer 3739 * code. 3740 */ 3741 INT_COALESCING_MAXCMDS { 3742 size 1 3743 } 3744 3745 /* 3746 * The minimum number of commands still outstanding required 3747 * to continue coalescing (2's complement of value). 3748 */ 3749 INT_COALESCING_MINCMDS { 3750 size 1 3751 } 3752 3753 /* 3754 * Number of commands "in-flight". 3755 */ 3756 CMDS_PENDING { 3757 size 2 3758 } 3759 3760 /* 3761 * The count of commands that have been coalesced. 3762 */ 3763 INT_COALESCING_CMDCOUNT { 3764 size 1 3765 } 3766 3767 /* 3768 * Since the HS_MAIBOX is self clearing, copy its contents to 3769 * this position in scratch ram every time it changes. 3770 */ 3771 LOCAL_HS_MAILBOX { 3772 size 1 3773 } 3774 /* 3775 * Target-mode CDB type to CDB length table used 3776 * in non-packetized operation. 3777 */ 3778 CMDSIZE_TABLE { 3779 size 8 3780 } 3781 /* 3782 * When an SCB with the MK_MESSAGE flag is 3783 * queued to the controller, it cannot enter 3784 * the waiting for selection list until the 3785 * selections for any previously queued 3786 * commands to that target complete. During 3787 * the wait, the MK_MESSAGE SCB is queued 3788 * here. 3789 */ 3790 MK_MESSAGE_SCB { 3791 size 2 3792 } 3793 /* 3794 * Saved SCSIID of MK_MESSAGE_SCB to avoid 3795 * an extra SCBPTR operation when deciding 3796 * if the MK_MESSAGE_SCB can be run. 3797 */ 3798 MK_MESSAGE_SCSIID { 3799 size 1 3800 } 3801} 3802 3803/************************* Hardware SCB Definition ****************************/ 3804scb { 3805 address 0x180 3806 size 64 3807 modes 0, 1, 2, 3 3808 SCB_RESIDUAL_DATACNT { 3809 size 4 3810 alias SCB_CDB_STORE 3811 alias SCB_HOST_CDB_PTR 3812 } 3813 SCB_RESIDUAL_SGPTR { 3814 size 4 3815 field SG_ADDR_MASK 0xf8 /* In the last byte */ 3816 field SG_ADDR_BIT 0x04 3817 field SG_OVERRUN_RESID 0x02 /* In the first byte */ 3818 field SG_LIST_NULL 0x01 /* In the first byte */ 3819 } 3820 SCB_SCSI_STATUS { 3821 size 1 3822 alias SCB_HOST_CDB_LEN 3823 } 3824 SCB_TARGET_PHASES { 3825 size 1 3826 } 3827 SCB_TARGET_DATA_DIR { 3828 size 1 3829 } 3830 SCB_TARGET_ITAG { 3831 size 1 3832 } 3833 SCB_SENSE_BUSADDR { 3834 /* 3835 * Only valid if CDB length is less than 13 bytes or 3836 * we are using a CDB pointer. Otherwise contains 3837 * the last 4 bytes of embedded cdb information. 3838 */ 3839 size 4 3840 alias SCB_NEXT_COMPLETE 3841 } 3842 SCB_TAG { 3843 alias SCB_FIFO_USE_COUNT 3844 size 2 3845 } 3846 SCB_CONTROL { 3847 size 1 3848 field TARGET_SCB 0x80 3849 field DISCENB 0x40 3850 field TAG_ENB 0x20 3851 field MK_MESSAGE 0x10 3852 field STATUS_RCVD 0x08 3853 field DISCONNECTED 0x04 3854 field SCB_TAG_TYPE 0x03 3855 } 3856 SCB_SCSIID { 3857 size 1 3858 field TID 0xF0 3859 field OID 0x0F 3860 } 3861 SCB_LUN { 3862 size 1 3863 field LID 0xff 3864 } 3865 SCB_TASK_ATTRIBUTE { 3866 size 1 3867 /* 3868 * Overloaded field for non-packetized 3869 * ignore wide residue message handling. 3870 */ 3871 field SCB_XFERLEN_ODD 0x01 3872 } 3873 SCB_CDB_LEN { 3874 size 1 3875 field SCB_CDB_LEN_PTR 0x80 /* CDB in host memory */ 3876 } 3877 SCB_TASK_MANAGEMENT { 3878 size 1 3879 } 3880 SCB_DATAPTR { 3881 size 8 3882 } 3883 SCB_DATACNT { 3884 /* 3885 * The last byte is really the high address bits for 3886 * the data address. 3887 */ 3888 size 4 3889 field SG_LAST_SEG 0x80 /* In the fourth byte */ 3890 field SG_HIGH_ADDR_BITS 0x7F /* In the fourth byte */ 3891 } 3892 SCB_SGPTR { 3893 size 4 3894 field SG_STATUS_VALID 0x04 /* In the first byte */ 3895 field SG_FULL_RESID 0x02 /* In the first byte */ 3896 field SG_LIST_NULL 0x01 /* In the first byte */ 3897 } 3898 SCB_BUSADDR { 3899 size 4 3900 } 3901 SCB_NEXT { 3902 alias SCB_NEXT_SCB_BUSADDR 3903 size 2 3904 } 3905 SCB_NEXT2 { 3906 size 2 3907 } 3908 SCB_SPARE { 3909 size 8 3910 alias SCB_PKT_LUN 3911 } 3912 SCB_DISCONNECTED_LISTS { 3913 size 8 3914 } 3915} 3916 3917/*********************************** Constants ********************************/ 3918const MK_MESSAGE_BIT_OFFSET 4 3919const TID_SHIFT 4 3920const TARGET_CMD_CMPLT 0xfe 3921const INVALID_ADDR 0x80 3922#define SCB_LIST_NULL 0xff 3923#define QOUTFIFO_ENTRY_VALID_TOGGLE 0x80 3924 3925const CCSGADDR_MAX 0x80 3926const CCSCBADDR_MAX 0x80 3927const CCSGRAM_MAXSEGS 16 3928 3929/* Selection Timeout Timer Constants */ 3930const STIMESEL_SHIFT 3 3931const STIMESEL_MIN 0x18 3932const STIMESEL_BUG_ADJ 0x8 3933 3934/* WDTR Message values */ 3935const BUS_8_BIT 0x00 3936const BUS_16_BIT 0x01 3937const BUS_32_BIT 0x02 3938 3939/* Offset maximums */ 3940const MAX_OFFSET 0xfe 3941const MAX_OFFSET_PACED 0xfe 3942const MAX_OFFSET_PACED_BUG 0x7f 3943/* 3944 * Some 160 devices incorrectly accept 0xfe as a 3945 * sync offset, but will overrun this value. Limit 3946 * to 0x7f for speed lower than U320 which will 3947 * avoid the persistent sync offset overruns. 3948 */ 3949const MAX_OFFSET_NON_PACED 0x7f 3950const HOST_MSG 0xff 3951 3952/* 3953 * The size of our sense buffers. 3954 * Sense buffer mapping can be handled in either of two ways. 3955 * The first is to allocate a dmamap for each transaction. 3956 * Depending on the architecture, dmamaps can be costly. The 3957 * alternative is to statically map the buffers in much the same 3958 * way we handle our scatter gather lists. The driver implements 3959 * the later. 3960 */ 3961const AHD_SENSE_BUFSIZE 256 3962 3963/* Target mode command processing constants */ 3964const CMD_GROUP_CODE_SHIFT 0x05 3965 3966const STATUS_BUSY 0x08 3967const STATUS_QUEUE_FULL 0x28 3968const STATUS_PKT_SENSE 0xFF 3969const TARGET_DATA_IN 1 3970 3971const SCB_TRANSFER_SIZE_FULL_LUN 56 3972const SCB_TRANSFER_SIZE_1BYTE_LUN 48 3973/* PKT_OVERRUN_BUFSIZE must be a multiple of 256 less than 64K */ 3974const PKT_OVERRUN_BUFSIZE 512 3975 3976/* 3977 * Timer parameters. 3978 */ 3979const AHD_TIMER_US_PER_TICK 25 3980const AHD_TIMER_MAX_TICKS 0xFFFF 3981const AHD_TIMER_MAX_US (AHD_TIMER_MAX_TICKS * AHD_TIMER_US_PER_TICK) 3982 3983/* 3984 * Downloaded (kernel inserted) constants 3985 */ 3986const SG_PREFETCH_CNT download 3987const SG_PREFETCH_CNT_LIMIT download 3988const SG_PREFETCH_ALIGN_MASK download 3989const SG_PREFETCH_ADDR_MASK download 3990const SG_SIZEOF download 3991const PKT_OVERRUN_BUFOFFSET download 3992const SCB_TRANSFER_SIZE download 3993const CACHELINE_MASK download 3994 3995/* 3996 * BIOS SCB offsets 3997 */ 3998const NVRAM_SCB_OFFSET 0x2C 3999