1 /* 2 * Core definitions and data structures shareable across OS platforms. 3 * 4 * Copyright (c) 1994-2002 Justin T. Gibbs. 5 * Copyright (c) 2000-2002 Adaptec Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification. 14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 15 * substantially similar to the "NO WARRANTY" disclaimer below 16 * ("Disclaimer") and any redistribution must be conditioned upon 17 * including a substantially similar Disclaimer requirement for further 18 * binary redistribution. 19 * 3. Neither the names of the above-listed copyright holders nor the names 20 * of any contributors may be used to endorse or promote products derived 21 * from this software without specific prior written permission. 22 * 23 * Alternatively, this software may be distributed under the terms of the 24 * GNU General Public License ("GPL") version 2 as published by the Free 25 * Software Foundation. 26 * 27 * NO WARRANTY 28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 38 * POSSIBILITY OF SUCH DAMAGES. 39 * 40 * $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#61 $ 41 * 42 * $FreeBSD$ 43 */ 44 45 #ifndef _AIC79XX_H_ 46 #define _AIC79XX_H_ 47 48 /* Register Definitions */ 49 #include "aic79xx_reg.h" 50 51 /************************* Forward Declarations *******************************/ 52 struct ahd_platform_data; 53 struct scb_platform_data; 54 55 /****************************** Useful Macros *********************************/ 56 #ifndef MAX 57 #define MAX(a,b) (((a) > (b)) ? (a) : (b)) 58 #endif 59 60 #ifndef MIN 61 #define MIN(a,b) (((a) < (b)) ? (a) : (b)) 62 #endif 63 64 #ifndef TRUE 65 #define TRUE 1 66 #endif 67 #ifndef FALSE 68 #define FALSE 0 69 #endif 70 71 #define NUM_ELEMENTS(array) (sizeof(array) / sizeof(*array)) 72 73 #define ALL_CHANNELS '\0' 74 #define ALL_TARGETS_MASK 0xFFFF 75 #define INITIATOR_WILDCARD (~0) 76 #define SCB_LIST_NULL 0xFF00 77 #define SCB_LIST_NULL_LE (ahd_htole16(SCB_LIST_NULL)) 78 #define QOUTFIFO_ENTRY_VALID 0x8000 79 #define QOUTFIFO_ENTRY_VALID_LE (ahd_htole16(0x8000)) 80 #define SCBID_IS_NULL(scbid) (((scbid) & 0xFF00 ) == SCB_LIST_NULL) 81 82 #define SCSIID_TARGET(ahd, scsiid) \ 83 (((scsiid) & TID) >> TID_SHIFT) 84 #define SCSIID_OUR_ID(scsiid) \ 85 ((scsiid) & OID) 86 #define SCSIID_CHANNEL(ahd, scsiid) ('A') 87 #define SCB_IS_SCSIBUS_B(ahd, scb) (0) 88 #define SCB_GET_OUR_ID(scb) \ 89 SCSIID_OUR_ID((scb)->hscb->scsiid) 90 #define SCB_GET_TARGET(ahd, scb) \ 91 SCSIID_TARGET((ahd), (scb)->hscb->scsiid) 92 #define SCB_GET_CHANNEL(ahd, scb) \ 93 SCSIID_CHANNEL(ahd, (scb)->hscb->scsiid) 94 #define SCB_GET_LUN(scb) \ 95 ((scb)->hscb->lun) 96 #define SCB_GET_TARGET_OFFSET(ahd, scb) \ 97 SCB_GET_TARGET(ahd, scb) 98 #define SCB_GET_TARGET_MASK(ahd, scb) \ 99 (0x01 << (SCB_GET_TARGET_OFFSET(ahd, scb))) 100 /* 101 * TCLs have the following format: TTTTLLLLLLLL 102 */ 103 #define TCL_TARGET_OFFSET(tcl) \ 104 ((((tcl) >> 4) & TID) >> 4) 105 #define TCL_LUN(tcl) \ 106 (tcl & (AHD_NUM_LUNS - 1)) 107 #define BUILD_TCL(scsiid, lun) \ 108 ((lun) | (((scsiid) & TID) << 4)) 109 #define BUILD_TCL_RAW(target, channel, lun) \ 110 ((lun) | ((target) << 8)) 111 112 #define SCB_GET_TAG(scb) \ 113 ahd_le16toh(scb->hscb->tag) 114 115 #ifndef AHD_TARGET_MODE 116 #undef AHD_TMODE_ENABLE 117 #define AHD_TMODE_ENABLE 0 118 #endif 119 120 #define AHD_BUILD_COL_IDX(target, lun) \ 121 (((lun) << 4) | target) 122 123 #define AHD_GET_SCB_COL_IDX(ahd, scb) \ 124 ((SCB_GET_LUN(scb) << 4) | SCB_GET_TARGET(ahd, scb)) 125 126 #define AHD_SET_SCB_COL_IDX(scb, col_idx) \ 127 do { \ 128 (scb)->hscb->scsiid = ((col_idx) << TID_SHIFT) & TID; \ 129 (scb)->hscb->lun = ((col_idx) >> 4) & (AHD_NUM_LUNS_NONPKT-1); \ 130 } while (0) 131 132 #define AHD_COPY_SCB_COL_IDX(dst, src) \ 133 do { \ 134 dst->hscb->scsiid = src->hscb->scsiid; \ 135 dst->hscb->lun = src->hscb->lun; \ 136 } while (0) 137 138 #define AHD_NEVER_COL_IDX 0xFFFF 139 140 /**************************** Driver Constants ********************************/ 141 /* 142 * The maximum number of supported targets. 143 */ 144 #define AHD_NUM_TARGETS 16 145 146 /* 147 * The maximum number of supported luns. 148 * The identify message only supports 64 luns in non-packetized transfers. 149 * You can have 2^64 luns when information unit transfers are enabled, 150 * but until we see a need to support that many, we support 256. 151 */ 152 #define AHD_NUM_LUNS_NONPKT 64 153 #define AHD_NUM_LUNS 256 154 155 /* 156 * The maximum transfer per S/G segment. 157 */ 158 #define AHD_MAXTRANSFER_SIZE 0x00ffffff /* limited by 24bit counter */ 159 160 /* 161 * The maximum amount of SCB storage in hardware on a controller. 162 * This value represents an upper bound. Due to software design, 163 * we may not be able to use this number. 164 */ 165 #define AHD_SCB_MAX 512 166 167 /* 168 * The maximum number of concurrent transactions supported per driver instance. 169 * Sequencer Control Blocks (SCBs) store per-transaction information. 170 */ 171 #define AHD_MAX_QUEUE AHD_SCB_MAX 172 173 /* 174 * Define the size of our QIN and QOUT FIFOs. They must be a power of 2 175 * in size and accomodate as many transactions as can be queued concurrently. 176 */ 177 #define AHD_QIN_SIZE AHD_MAX_QUEUE 178 #define AHD_QOUT_SIZE AHD_MAX_QUEUE 179 180 #define AHD_QIN_WRAP(x) ((x) & (AHD_QIN_SIZE-1)) 181 /* 182 * The maximum amount of SCB storage we allocate in host memory. 183 */ 184 #define AHD_SCB_MAX_ALLOC AHD_MAX_QUEUE 185 186 /* 187 * Ring Buffer of incoming target commands. 188 * We allocate 256 to simplify the logic in the sequencer 189 * by using the natural wrap point of an 8bit counter. 190 */ 191 #define AHD_TMODE_CMDS 256 192 193 /* Reset line assertion time in us */ 194 #define AHD_BUSRESET_DELAY 25 195 196 /******************* Chip Characteristics/Operating Settings *****************/ 197 /* 198 * Chip Type 199 * The chip order is from least sophisticated to most sophisticated. 200 */ 201 typedef enum { 202 AHD_NONE = 0x0000, 203 AHD_CHIPID_MASK = 0x00FF, 204 AHD_AIC7901 = 0x0001, 205 AHD_AIC7902 = 0x0002, 206 AHD_AIC7901A = 0x0003, 207 AHD_PCI = 0x0100, /* Bus type PCI */ 208 AHD_PCIX = 0x0200, /* Bus type PCIX */ 209 AHD_BUS_MASK = 0x0F00 210 } ahd_chip; 211 212 /* 213 * Features available in each chip type. 214 */ 215 typedef enum { 216 AHD_FENONE = 0x00000, 217 AHD_WIDE = 0x00001, /* Wide Channel */ 218 AHD_MULTI_FUNC = 0x00100, /* Multi-Function Twin Channel Device */ 219 AHD_TARGETMODE = 0x01000, /* Has tested target mode support */ 220 AHD_MULTIROLE = 0x02000, /* Space for two roles at a time */ 221 AHD_REMOVABLE = 0x00000, /* Hot-Swap supported - None so far*/ 222 AHD_AIC7901_FE = AHD_FENONE, 223 AHD_AIC7902_FE = AHD_MULTI_FUNC 224 } ahd_feature; 225 226 /* 227 * Bugs in the silicon that we work around in software. 228 */ 229 typedef enum { 230 AHD_BUGNONE = 0x0000, 231 AHD_SENT_SCB_UPDATE_BUG = 0x0001, 232 AHD_ABORT_LQI_BUG = 0x0002, 233 AHD_PKT_BITBUCKET_BUG = 0x0004, 234 AHD_LONG_SETIMO_BUG = 0x0008, 235 AHD_NLQICRC_DELAYED_BUG = 0x0010, 236 AHD_SCSIRST_BUG = 0x0020, 237 AHD_PCIX_CHIPRST_BUG = 0x0040, 238 AHD_PCIX_MMAPIO_BUG = 0x0080, 239 /* Bug workarounds that can be disabled on non-PCIX busses. */ 240 AHD_PCIX_BUG_MASK = AHD_PCIX_CHIPRST_BUG 241 | AHD_PCIX_MMAPIO_BUG, 242 AHD_LQO_ATNO_BUG = 0x0100, 243 AHD_AUTOFLUSH_BUG = 0x0200, 244 AHD_CLRLQO_AUTOCLR_BUG = 0x0400, 245 AHD_PKTIZED_STATUS_BUG = 0x0800, 246 AHD_PKT_LUN_BUG = 0x1000, 247 AHD_MDFF_WSCBPTR_BUG = 0x2000, 248 AHD_REG_SLOW_SETTLE_BUG = 0x4000, 249 AHD_SET_MODE_BUG = 0x8000, 250 AHD_BUSFREEREV_BUG = 0x10000 251 } ahd_bug; 252 253 /* 254 * Configuration specific settings. 255 * The driver determines these settings by probing the 256 * chip/controller's configuration. 257 */ 258 typedef enum { 259 AHD_FNONE = 0x00000, 260 AHD_PRIMARY_CHANNEL = 0x00003,/* 261 * The channel that should 262 * be probed first. 263 */ 264 AHD_USEDEFAULTS = 0x00004,/* 265 * For cards without an seeprom 266 * or a BIOS to initialize the chip's 267 * SRAM, we use the default target 268 * settings. 269 */ 270 AHD_SEQUENCER_DEBUG = 0x00008, 271 AHD_RESET_BUS_A = 0x00010, 272 AHD_EXTENDED_TRANS_A = 0x00020, 273 AHD_TERM_ENB_A = 0x00040, 274 AHD_SPCHK_ENB_A = 0x00080, 275 AHD_STPWLEVEL_A = 0x00100, 276 AHD_INITIATORROLE = 0x00200,/* 277 * Allow initiator operations on 278 * this controller. 279 */ 280 AHD_TARGETROLE = 0x00400,/* 281 * Allow target operations on this 282 * controller. 283 */ 284 AHD_RESOURCE_SHORTAGE = 0x00800, 285 AHD_TQINFIFO_BLOCKED = 0x01000,/* Blocked waiting for ATIOs */ 286 AHD_INT50_SPEEDFLEX = 0x02000,/* 287 * Internal 50pin connector 288 * sits behind an aic3860 289 */ 290 AHD_BIOS_ENABLED = 0x04000, 291 AHD_ALL_INTERRUPTS = 0x08000, 292 AHD_39BIT_ADDRESSING = 0x10000,/* Use 39 bit addressing scheme. */ 293 AHD_64BIT_ADDRESSING = 0x20000,/* Use 64 bit addressing scheme. */ 294 AHD_CURRENT_SENSING = 0x40000, 295 AHD_SCB_CONFIG_USED = 0x80000,/* No SEEPROM but SCB had info. */ 296 AHD_CPQ_BOARD = 0x100000, 297 AHD_RESET_POLL_ACTIVE = 0x200000 298 } ahd_flag; 299 300 /************************* Hardware SCB Definition ***************************/ 301 302 /* 303 * The driver keeps up to MAX_SCB scb structures per card in memory. The SCB 304 * consists of a "hardware SCB" mirroring the fields availible on the card 305 * and additional information the kernel stores for each transaction. 306 * 307 * To minimize space utilization, a portion of the hardware scb stores 308 * different data during different portions of a SCSI transaction. 309 * As initialized by the host driver for the initiator role, this area 310 * contains the SCSI cdb (or a pointer to the cdb) to be executed. After 311 * the cdb has been presented to the target, this area serves to store 312 * residual transfer information and the SCSI status byte. 313 * For the target role, the contents of this area do not change, but 314 * still serve a different purpose than for the initiator role. See 315 * struct target_data for details. 316 */ 317 318 /* 319 * Status information embedded in the shared poriton of 320 * an SCB after passing the cdb to the target. The kernel 321 * driver will only read this data for transactions that 322 * complete abnormally. 323 */ 324 struct initiator_status { 325 uint32_t residual_datacnt; /* Residual in the current S/G seg */ 326 uint32_t residual_sgptr; /* The next S/G for this transfer */ 327 uint8_t scsi_status; /* Standard SCSI status byte */ 328 }; 329 330 struct target_status { 331 uint32_t residual_datacnt; /* Residual in the current S/G seg */ 332 uint32_t residual_sgptr; /* The next S/G for this transfer */ 333 uint8_t scsi_status; /* SCSI status to give to initiator */ 334 uint8_t target_phases; /* Bitmap of phases to execute */ 335 uint8_t data_phase; /* Data-In or Data-Out */ 336 uint8_t initiator_tag; /* Initiator's transaction tag */ 337 }; 338 339 /* 340 * Initiator mode SCB shared data area. 341 * If the embedded CDB is 12 bytes or less, we embed 342 * the sense buffer address in the SCB. This allows 343 * us to retrieve sense information without interupting 344 * the host in packetized mode. 345 */ 346 typedef uint32_t sense_addr_t; 347 #define MAX_CDB_LEN 16 348 #define MAX_CDB_LEN_WITH_SENSE_ADDR (MAX_CDB_LEN - sizeof(sense_addr_t)) 349 union initiator_data { 350 uint64_t cdbptr; 351 uint8_t cdb[MAX_CDB_LEN]; 352 struct { 353 uint8_t cdb[MAX_CDB_LEN_WITH_SENSE_ADDR]; 354 sense_addr_t sense_addr; 355 } cdb_plus_saddr; 356 }; 357 358 /* 359 * Target mode version of the shared data SCB segment. 360 */ 361 struct target_data { 362 uint32_t spare[2]; 363 uint8_t scsi_status; /* SCSI status to give to initiator */ 364 uint8_t target_phases; /* Bitmap of phases to execute */ 365 uint8_t data_phase; /* Data-In or Data-Out */ 366 uint8_t initiator_tag; /* Initiator's transaction tag */ 367 }; 368 369 struct hardware_scb { 370 /*0*/ union { 371 union initiator_data idata; 372 struct target_data tdata; 373 struct initiator_status istatus; 374 struct target_status tstatus; 375 } shared_data; 376 /* 377 * A word about residuals. 378 * The scb is presented to the sequencer with the dataptr and datacnt 379 * fields initialized to the contents of the first S/G element to 380 * transfer. The sgptr field is initialized to the bus address for 381 * the S/G element that follows the first in the in core S/G array 382 * or'ed with the SG_FULL_RESID flag. Sgptr may point to an invalid 383 * S/G entry for this transfer (single S/G element transfer with the 384 * first elements address and length preloaded in the dataptr/datacnt 385 * fields). If no transfer is to occur, sgptr is set to SG_LIST_NULL. 386 * The SG_FULL_RESID flag ensures that the residual will be correctly 387 * noted even if no data transfers occur. Once the data phase is entered, 388 * the residual sgptr and datacnt are loaded from the sgptr and the 389 * datacnt fields. After each S/G element's dataptr and length are 390 * loaded into the hardware, the residual sgptr is advanced. After 391 * each S/G element is expired, its datacnt field is checked to see 392 * if the LAST_SEG flag is set. If so, SG_LIST_NULL is set in the 393 * residual sg ptr and the transfer is considered complete. If the 394 * sequencer determines that there is a residual in the tranfer, or 395 * there is non-zero status, it will set the SG_STATUS_VALID flag in 396 * sgptr and dma the scb back into host memory. To sumarize: 397 * 398 * Sequencer: 399 * o A residual has occurred if SG_FULL_RESID is set in sgptr, 400 * or residual_sgptr does not have SG_LIST_NULL set. 401 * 402 * o We are transfering the last segment if residual_datacnt has 403 * the SG_LAST_SEG flag set. 404 * 405 * Host: 406 * o A residual can only have occurred if a completed scb has the 407 * SG_STATUS_VALID flag set. Inspection of the SCSI status field, 408 * the residual_datacnt, and the residual_sgptr field will tell 409 * for sure. 410 * 411 * o residual_sgptr and sgptr refer to the "next" sg entry 412 * and so may point beyond the last valid sg entry for the 413 * transfer. 414 */ 415 #define SG_PTR_MASK 0xFFFFFFF8 416 /*16*/ uint16_t tag; 417 /*18*/ uint8_t cdb_len; 418 /*19*/ uint8_t task_management; 419 /*20*/ uint32_t next_hscb_busaddr; 420 /*24*/ uint64_t dataptr; 421 /*32*/ uint32_t datacnt; /* Byte 3 is spare. */ 422 /*36*/ uint32_t sgptr; 423 /*40*/ uint8_t control; /* See SCB_CONTROL in aic79xx.reg for details */ 424 /*41*/ uint8_t scsiid; /* 425 * Selection out Id 426 * Our Id (bits 0-3) Their ID (bits 4-7) 427 */ 428 /*42*/ uint8_t lun; 429 /*43*/ uint8_t task_attribute; 430 /*44*/ uint32_t hscb_busaddr; 431 /******* Long lun field only downloaded for full 8 byte lun support *******/ 432 /*48*/ uint8_t pkt_long_lun[8]; 433 /******* Fields below are not Downloaded (Sequencer may use for scratch) ******/ 434 /*56*/ uint8_t spare[8]; 435 }; 436 437 /************************ Kernel SCB Definitions ******************************/ 438 /* 439 * Some fields of the SCB are OS dependent. Here we collect the 440 * definitions for elements that all OS platforms need to include 441 * in there SCB definition. 442 */ 443 444 /* 445 * Definition of a scatter/gather element as transfered to the controller. 446 * The aic7xxx chips only support a 24bit length. We use the top byte of 447 * the length to store additional address bits and a flag to indicate 448 * that a given segment terminates the transfer. This gives us an 449 * addressable range of 512GB on machines with 64bit PCI or with chips 450 * that can support dual address cycles on 32bit PCI busses. 451 */ 452 struct ahd_dma_seg { 453 uint32_t addr; 454 uint32_t len; 455 #define AHD_DMA_LAST_SEG 0x80000000 456 #define AHD_SG_HIGH_ADDR_MASK 0x7F000000 457 #define AHD_SG_LEN_MASK 0x00FFFFFF 458 }; 459 460 struct ahd_dma64_seg { 461 uint64_t addr; 462 uint32_t len; 463 uint32_t pad; 464 }; 465 466 struct map_node { 467 bus_dmamap_t dmamap; 468 bus_addr_t physaddr; 469 uint8_t *vaddr; 470 SLIST_ENTRY(map_node) links; 471 }; 472 473 /* 474 * The current state of this SCB. 475 */ 476 typedef enum { 477 SCB_FLAG_NONE = 0x00000, 478 SCB_TRANSMISSION_ERROR = 0x00001,/* 479 * We detected a parity or CRC 480 * error that has effected the 481 * payload of the command. This 482 * flag is checked when normal 483 * status is returned to catch 484 * the case of a target not 485 * responding to our attempt 486 * to report the error. 487 */ 488 SCB_OTHERTCL_TIMEOUT = 0x00002,/* 489 * Another device was active 490 * during the first timeout for 491 * this SCB so we gave ourselves 492 * an additional timeout period 493 * in case it was hogging the 494 * bus. 495 */ 496 SCB_DEVICE_RESET = 0x00004, 497 SCB_SENSE = 0x00008, 498 SCB_CDB32_PTR = 0x00010, 499 SCB_RECOVERY_SCB = 0x00020, 500 SCB_AUTO_NEGOTIATE = 0x00040,/* Negotiate to achieve goal. */ 501 SCB_NEGOTIATE = 0x00080,/* Negotiation forced for command. */ 502 SCB_ABORT = 0x00100, 503 SCB_ACTIVE = 0x00400, 504 SCB_TARGET_IMMEDIATE = 0x00800, 505 SCB_PACKETIZED = 0x01000, 506 SCB_EXPECT_PPR_BUSFREE = 0x02000, 507 SCB_PKT_SENSE = 0x04000, 508 SCB_CMDPHASE_ABORT = 0x08000, 509 SCB_ON_COL_LIST = 0x10000 510 } scb_flag; 511 512 struct scb { 513 struct hardware_scb *hscb; 514 union { 515 SLIST_ENTRY(scb) sle; 516 LIST_ENTRY(scb) le; 517 TAILQ_ENTRY(scb) tqe; 518 } links; 519 union { 520 SLIST_ENTRY(scb) sle; 521 LIST_ENTRY(scb) le; 522 TAILQ_ENTRY(scb) tqe; 523 } links2; 524 #define pending_links links2.le 525 #define collision_links links2.le 526 struct scb *col_scb; 527 ahd_io_ctx_t io_ctx; 528 struct ahd_softc *ahd_softc; 529 scb_flag flags; 530 #ifndef __linux__ 531 bus_dmamap_t dmamap; 532 #endif 533 struct scb_platform_data *platform_data; 534 struct map_node *hscb_map; 535 struct map_node *sg_map; 536 struct map_node *sense_map; 537 void *sg_list; 538 uint8_t *sense_data; 539 bus_addr_t sg_list_busaddr; 540 bus_addr_t sense_busaddr; 541 u_int sg_count;/* How full ahd_dma_seg is */ 542 }; 543 544 TAILQ_HEAD(scb_tailq, scb); 545 LIST_HEAD(scb_list, scb); 546 547 struct scb_data { 548 /* 549 * TAILQ of lists of free SCBs grouped by device 550 * collision domains. 551 */ 552 struct scb_tailq free_scbs; 553 554 /* 555 * Per-device lists of SCBs whose tag ID would collide 556 * with an already active tag on the device. 557 */ 558 struct scb_list free_scb_lists[AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT]; 559 560 /* 561 * SCBs that will not collide with any active device. 562 */ 563 struct scb_list any_dev_free_scb_list; 564 565 /* 566 * Mapping from tag to SCB. 567 */ 568 struct scb *scbindex[AHD_SCB_MAX]; 569 570 /* 571 * "Bus" addresses of our data structures. 572 */ 573 bus_dma_tag_t hscb_dmat; /* dmat for our hardware SCB array */ 574 bus_dma_tag_t sg_dmat; /* dmat for our sg segments */ 575 bus_dma_tag_t sense_dmat; /* dmat for our sense buffers */ 576 SLIST_HEAD(, map_node) hscb_maps; 577 SLIST_HEAD(, map_node) sg_maps; 578 SLIST_HEAD(, map_node) sense_maps; 579 int scbs_left; /* unallocated scbs in head map_node */ 580 int sgs_left; /* unallocated sgs in head map_node */ 581 int sense_left; /* unallocated sense in head map_node */ 582 uint16_t numscbs; 583 uint16_t maxhscbs; /* Number of SCBs on the card */ 584 uint8_t init_level; /* 585 * How far we've initialized 586 * this structure. 587 */ 588 }; 589 590 /************************ Target Mode Definitions *****************************/ 591 592 /* 593 * Connection desciptor for select-in requests in target mode. 594 */ 595 struct target_cmd { 596 uint8_t scsiid; /* Our ID and the initiator's ID */ 597 uint8_t identify; /* Identify message */ 598 uint8_t bytes[22]; /* 599 * Bytes contains any additional message 600 * bytes terminated by 0xFF. The remainder 601 * is the cdb to execute. 602 */ 603 uint8_t cmd_valid; /* 604 * When a command is complete, the firmware 605 * will set cmd_valid to all bits set. 606 * After the host has seen the command, 607 * the bits are cleared. This allows us 608 * to just peek at host memory to determine 609 * if more work is complete. cmd_valid is on 610 * an 8 byte boundary to simplify setting 611 * it on aic7880 hardware which only has 612 * limited direct access to the DMA FIFO. 613 */ 614 uint8_t pad[7]; 615 }; 616 617 /* 618 * Number of events we can buffer up if we run out 619 * of immediate notify ccbs. 620 */ 621 #define AHD_TMODE_EVENT_BUFFER_SIZE 8 622 struct ahd_tmode_event { 623 uint8_t initiator_id; 624 uint8_t event_type; /* MSG type or EVENT_TYPE_BUS_RESET */ 625 #define EVENT_TYPE_BUS_RESET 0xFF 626 uint8_t event_arg; 627 }; 628 629 /* 630 * Per enabled lun target mode state. 631 * As this state is directly influenced by the host OS'es target mode 632 * environment, we let the OS module define it. Forward declare the 633 * structure here so we can store arrays of them, etc. in OS neutral 634 * data structures. 635 */ 636 #ifdef AHD_TARGET_MODE 637 struct ahd_tmode_lstate { 638 struct cam_path *path; 639 struct ccb_hdr_slist accept_tios; 640 struct ccb_hdr_slist immed_notifies; 641 struct ahd_tmode_event event_buffer[AHD_TMODE_EVENT_BUFFER_SIZE]; 642 uint8_t event_r_idx; 643 uint8_t event_w_idx; 644 }; 645 #else 646 struct ahd_tmode_lstate; 647 #endif 648 649 /******************** Transfer Negotiation Datastructures *********************/ 650 #define AHD_TRANS_CUR 0x01 /* Modify current neogtiation status */ 651 #define AHD_TRANS_ACTIVE 0x03 /* Assume this target is on the bus */ 652 #define AHD_TRANS_GOAL 0x04 /* Modify negotiation goal */ 653 #define AHD_TRANS_USER 0x08 /* Modify user negotiation settings */ 654 #define AHD_PERIOD_ASYNC 0xFF 655 #define AHD_PERIOD_10MHz 0x19 656 657 /* 658 * Transfer Negotiation Information. 659 */ 660 struct ahd_transinfo { 661 uint8_t protocol_version; /* SCSI Revision level */ 662 uint8_t transport_version; /* SPI Revision level */ 663 uint8_t width; /* Bus width */ 664 uint8_t period; /* Sync rate factor */ 665 uint8_t offset; /* Sync offset */ 666 uint8_t ppr_options; /* Parallel Protocol Request options */ 667 }; 668 669 /* 670 * Per-initiator current, goal and user transfer negotiation information. */ 671 struct ahd_initiator_tinfo { 672 struct ahd_transinfo curr; 673 struct ahd_transinfo goal; 674 struct ahd_transinfo user; 675 }; 676 677 /* 678 * Per enabled target ID state. 679 * Pointers to lun target state as well as sync/wide negotiation information 680 * for each initiator<->target mapping. For the initiator role we pretend 681 * that we are the target and the targets are the initiators since the 682 * negotiation is the same regardless of role. 683 */ 684 struct ahd_tmode_tstate { 685 struct ahd_tmode_lstate* enabled_luns[AHD_NUM_LUNS]; 686 struct ahd_initiator_tinfo transinfo[AHD_NUM_TARGETS]; 687 688 /* 689 * Per initiator state bitmasks. 690 */ 691 uint16_t auto_negotiate;/* Auto Negotiation Required */ 692 uint16_t discenable; /* Disconnection allowed */ 693 uint16_t tagenable; /* Tagged Queuing allowed */ 694 }; 695 696 /* 697 * Points of interest along the negotiated transfer scale. 698 */ 699 #define AHD_SYNCRATE_MAX 0x8 700 #define AHD_SYNCRATE_160 0x8 701 #define AHD_SYNCRATE_PACED 0x8 702 #define AHD_SYNCRATE_DT 0x9 703 #define AHD_SYNCRATE_ULTRA2 0xa 704 #define AHD_SYNCRATE_ULTRA 0xc 705 #define AHD_SYNCRATE_FAST 0x19 706 #define AHD_SYNCRATE_MIN_DT AHD_SYNCRATE_FAST 707 #define AHD_SYNCRATE_SYNC 0x32 708 #define AHD_SYNCRATE_MIN 0x60 709 #define AHD_SYNCRATE_ASYNC 0xFF 710 711 /* 712 * In RevA, the synctable uses a 120MHz rate for the period 713 * factor 8 and 160MHz for the period factor 7. The 120MHz 714 * rate never made it into the official SCSI spec, so we must 715 * compensate when setting the negotiation table for Rev A 716 * parts. 717 */ 718 #define AHD_SYNCRATE_REVA_120 0x8 719 #define AHD_SYNCRATE_REVA_160 0x7 720 721 /***************************** Lookup Tables **********************************/ 722 /* 723 * Phase -> name and message out response 724 * to parity errors in each phase table. 725 */ 726 struct ahd_phase_table_entry { 727 uint8_t phase; 728 uint8_t mesg_out; /* Message response to parity errors */ 729 char *phasemsg; 730 }; 731 732 /************************** Serial EEPROM Format ******************************/ 733 734 struct seeprom_config { 735 /* 736 * Per SCSI ID Configuration Flags 737 */ 738 uint16_t device_flags[16]; /* words 0-15 */ 739 #define CFXFER 0x003F /* synchronous transfer rate */ 740 #define CFXFER_ASYNC 0x3F 741 #define CFQAS 0x0040 /* Negotiate QAS */ 742 #define CFPACKETIZED 0x0080 /* Negotiate Packetized Transfers */ 743 #define CFSTART 0x0100 /* send start unit SCSI command */ 744 #define CFINCBIOS 0x0200 /* include in BIOS scan */ 745 #define CFDISC 0x0400 /* enable disconnection */ 746 #define CFMULTILUNDEV 0x0800 /* Probe multiple luns in BIOS scan */ 747 #define CFWIDEB 0x1000 /* wide bus device */ 748 #define CFHOSTMANAGED 0x8000 /* Managed by a RAID controller */ 749 750 /* 751 * BIOS Control Bits 752 */ 753 uint16_t bios_control; /* word 16 */ 754 #define CFSUPREM 0x0001 /* support all removeable drives */ 755 #define CFSUPREMB 0x0002 /* support removeable boot drives */ 756 #define CFBIOSSTATE 0x000C /* BIOS Action State */ 757 #define CFBS_DISABLED 0x00 758 #define CFBS_ENABLED 0x04 759 #define CFBS_DISABLED_SCAN 0x08 760 #define CFENABLEDV 0x0010 /* Perform Domain Validation */ 761 #define CFCTRL_A 0x0020 /* BIOS displays Ctrl-A message */ 762 #define CFSPARITY 0x0040 /* SCSI parity */ 763 #define CFEXTEND 0x0080 /* extended translation enabled */ 764 #define CFBOOTCD 0x0100 /* Support Bootable CD-ROM */ 765 #define CFMSG_LEVEL 0x0600 /* BIOS Message Level */ 766 #define CFMSG_VERBOSE 0x0000 767 #define CFMSG_SILENT 0x0200 768 #define CFMSG_DIAG 0x0400 769 #define CFRESETB 0x0800 /* reset SCSI bus at boot */ 770 /* UNUSED 0xf000 */ 771 772 /* 773 * Host Adapter Control Bits 774 */ 775 uint16_t adapter_control; /* word 17 */ 776 #define CFAUTOTERM 0x0001 /* Perform Auto termination */ 777 #define CFSTERM 0x0002 /* SCSI low byte termination */ 778 #define CFWSTERM 0x0004 /* SCSI high byte termination */ 779 #define CFSEAUTOTERM 0x0008 /* Ultra2 Perform secondary Auto Term*/ 780 #define CFSELOWTERM 0x0010 /* Ultra2 secondary low term */ 781 #define CFSEHIGHTERM 0x0020 /* Ultra2 secondary high term */ 782 #define CFSTPWLEVEL 0x0040 /* Termination level control */ 783 #define CFBIOSAUTOTERM 0x0080 /* Perform Auto termination */ 784 #define CFTERM_MENU 0x0100 /* BIOS displays termination menu */ 785 #define CFCLUSTERENB 0x8000 /* Cluster Enable */ 786 787 /* 788 * Bus Release Time, Host Adapter ID 789 */ 790 uint16_t brtime_id; /* word 18 */ 791 #define CFSCSIID 0x000f /* host adapter SCSI ID */ 792 /* UNUSED 0x00f0 */ 793 #define CFBRTIME 0xff00 /* bus release time/PCI Latency Time */ 794 795 /* 796 * Maximum targets 797 */ 798 uint16_t max_targets; /* word 19 */ 799 #define CFMAXTARG 0x00ff /* maximum targets */ 800 #define CFBOOTLUN 0x0f00 /* Lun to boot from */ 801 #define CFBOOTID 0xf000 /* Target to boot from */ 802 uint16_t res_1[10]; /* words 20-29 */ 803 uint16_t signature; /* BIOS Signature */ 804 #define CFSIGNATURE 0x400 805 uint16_t checksum; /* word 31 */ 806 }; 807 808 /****************************** Flexport Logic ********************************/ 809 #define FLXADDR_TERMCTL 0x0 810 #define FLX_TERMCTL_ENSECHIGH 0x8 811 #define FLX_TERMCTL_ENSECLOW 0x4 812 #define FLX_TERMCTL_ENPRIHIGH 0x2 813 #define FLX_TERMCTL_ENPRILOW 0x1 814 #define FLXADDR_ROMSTAT_CURSENSECTL 0x1 815 #define FLX_ROMSTAT_SEECFG 0xF0 816 #define FLX_ROMSTAT_EECFG 0x0F 817 #define FLX_ROMSTAT_SEE_93C66 0x00 818 #define FLX_ROMSTAT_SEE_NONE 0xF0 819 #define FLX_ROMSTAT_EE_512x8 0x0 820 #define FLX_ROMSTAT_EE_1MBx8 0x1 821 #define FLX_ROMSTAT_EE_2MBx8 0x2 822 #define FLX_ROMSTAT_EE_4MBx8 0x3 823 #define FLX_ROMSTAT_EE_16MBx8 0x4 824 #define CURSENSE_ENB 0x1 825 #define FLXADDR_FLEXSTAT 0x2 826 #define FLX_FSTAT_BUSY 0x1 827 #define FLXADDR_CURRENT_STAT 0x4 828 #define FLX_CSTAT_SEC_HIGH 0xC0 829 #define FLX_CSTAT_SEC_LOW 0x30 830 #define FLX_CSTAT_PRI_HIGH 0x0C 831 #define FLX_CSTAT_PRI_LOW 0x03 832 #define FLX_CSTAT_MASK 0x03 833 #define FLX_CSTAT_SHIFT 2 834 #define FLX_CSTAT_OKAY 0x0 835 #define FLX_CSTAT_OVER 0x1 836 #define FLX_CSTAT_UNDER 0x2 837 #define FLX_CSTAT_INVALID 0x3 838 839 int ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf, 840 u_int start_addr, u_int count); 841 842 int ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf, 843 u_int start_addr, u_int count); 844 int ahd_wait_seeprom(struct ahd_softc *ahd); 845 int ahd_verify_cksum(struct seeprom_config *sc); 846 int ahd_acquire_seeprom(struct ahd_softc *ahd); 847 void ahd_release_seeprom(struct ahd_softc *ahd); 848 849 /**************************** Message Buffer *********************************/ 850 typedef enum { 851 MSG_FLAG_NONE = 0x00, 852 MSG_FLAG_EXPECT_PPR_BUSFREE = 0x01, 853 MSG_FLAG_IU_REQ_CHANGED = 0x02, 854 MSG_FLAG_EXPECT_IDE_BUSFREE = 0x04, 855 MSG_FLAG_PACKETIZED = 0x08 856 } ahd_msg_flags; 857 858 typedef enum { 859 MSG_TYPE_NONE = 0x00, 860 MSG_TYPE_INITIATOR_MSGOUT = 0x01, 861 MSG_TYPE_INITIATOR_MSGIN = 0x02, 862 MSG_TYPE_TARGET_MSGOUT = 0x03, 863 MSG_TYPE_TARGET_MSGIN = 0x04 864 } ahd_msg_type; 865 866 typedef enum { 867 MSGLOOP_IN_PROG, 868 MSGLOOP_MSGCOMPLETE, 869 MSGLOOP_TERMINATED 870 } msg_loop_stat; 871 872 /*********************** Software Configuration Structure *********************/ 873 struct ahd_suspend_channel_state { 874 uint8_t scsiseq; 875 uint8_t sxfrctl0; 876 uint8_t sxfrctl1; 877 uint8_t simode0; 878 uint8_t simode1; 879 uint8_t seltimer; 880 uint8_t seqctl; 881 }; 882 883 struct ahd_suspend_state { 884 struct ahd_suspend_channel_state channel[2]; 885 uint8_t optionmode; 886 uint8_t dscommand0; 887 uint8_t dspcistatus; 888 /* hsmailbox */ 889 uint8_t crccontrol1; 890 uint8_t scbbaddr; 891 /* Host and sequencer SCB counts */ 892 uint8_t dff_thrsh; 893 uint8_t *scratch_ram; 894 uint8_t *btt; 895 }; 896 897 typedef void (*ahd_bus_intr_t)(struct ahd_softc *); 898 899 typedef enum { 900 AHD_MODE_DFF0, 901 AHD_MODE_DFF1, 902 AHD_MODE_CCHAN, 903 AHD_MODE_SCSI, 904 AHD_MODE_CFG, 905 AHD_MODE_UNKNOWN 906 } ahd_mode; 907 908 #define AHD_MK_MSK(x) (0x01 << (x)) 909 #define AHD_MODE_DFF0_MSK AHD_MK_MSK(AHD_MODE_DFF0) 910 #define AHD_MODE_DFF1_MSK AHD_MK_MSK(AHD_MODE_DFF1) 911 #define AHD_MODE_CCHAN_MSK AHD_MK_MSK(AHD_MODE_CCHAN) 912 #define AHD_MODE_SCSI_MSK AHD_MK_MSK(AHD_MODE_SCSI) 913 #define AHD_MODE_CFG_MSK AHD_MK_MSK(AHD_MODE_CFG) 914 #define AHD_MODE_UNKNOWN_MSK AHD_MK_MSK(AHD_MODE_UNKNOWN) 915 #define AHD_MODE_ANY_MSK (~0) 916 917 typedef uint8_t ahd_mode_state; 918 919 typedef void ahd_callback_t (void *); 920 921 struct ahd_softc { 922 bus_space_tag_t tags[2]; 923 bus_space_handle_t bshs[2]; 924 #ifndef __linux__ 925 bus_dma_tag_t buffer_dmat; /* dmat for buffer I/O */ 926 #endif 927 struct scb_data scb_data; 928 929 struct hardware_scb *next_queued_hscb; 930 931 /* 932 * SCBs that have been sent to the controller 933 */ 934 LIST_HEAD(, scb) pending_scbs; 935 936 /* 937 * Current register window mode information. 938 */ 939 ahd_mode dst_mode; 940 ahd_mode src_mode; 941 942 /* 943 * Saved register window mode information 944 * used for restore on next unpause. 945 */ 946 ahd_mode saved_dst_mode; 947 ahd_mode saved_src_mode; 948 949 /* 950 * Platform specific data. 951 */ 952 struct ahd_platform_data *platform_data; 953 954 /* 955 * Platform specific device information. 956 */ 957 ahd_dev_softc_t dev_softc; 958 959 /* 960 * Bus specific device information. 961 */ 962 ahd_bus_intr_t bus_intr; 963 964 /* 965 * Target mode related state kept on a per enabled lun basis. 966 * Targets that are not enabled will have null entries. 967 * As an initiator, we keep one target entry for our initiator 968 * ID to store our sync/wide transfer settings. 969 */ 970 struct ahd_tmode_tstate *enabled_targets[AHD_NUM_TARGETS]; 971 972 /* 973 * The black hole device responsible for handling requests for 974 * disabled luns on enabled targets. 975 */ 976 struct ahd_tmode_lstate *black_hole; 977 978 /* 979 * Device instance currently on the bus awaiting a continue TIO 980 * for a command that was not given the disconnect priveledge. 981 */ 982 struct ahd_tmode_lstate *pending_device; 983 984 /* 985 * Timer handles for timer driven callbacks. 986 */ 987 ahd_timer_t reset_timer; 988 989 /* 990 * Card characteristics 991 */ 992 ahd_chip chip; 993 ahd_feature features; 994 ahd_bug bugs; 995 ahd_flag flags; 996 struct seeprom_config *seep_config; 997 998 /* Values to store in the SEQCTL register for pause and unpause */ 999 uint8_t unpause; 1000 uint8_t pause; 1001 1002 /* Command Queues */ 1003 uint16_t qoutfifonext; 1004 uint16_t qoutfifonext_valid_tag; 1005 uint16_t qinfifonext; 1006 uint16_t qinfifo[AHD_SCB_MAX]; 1007 uint16_t *qoutfifo; 1008 1009 /* Critical Section Data */ 1010 struct cs *critical_sections; 1011 u_int num_critical_sections; 1012 1013 /* Buffer for handling packetized bitbucket. */ 1014 uint8_t *overrun_buf; 1015 1016 /* Links for chaining softcs */ 1017 TAILQ_ENTRY(ahd_softc) links; 1018 1019 /* Channel Names ('A', 'B', etc.) */ 1020 char channel; 1021 1022 /* Initiator Bus ID */ 1023 uint8_t our_id; 1024 1025 /* 1026 * PCI error detection. 1027 */ 1028 int unsolicited_ints; 1029 1030 /* 1031 * Target incoming command FIFO. 1032 */ 1033 struct target_cmd *targetcmds; 1034 uint8_t tqinfifonext; 1035 1036 /* 1037 * Incoming and outgoing message handling. 1038 */ 1039 uint8_t send_msg_perror; 1040 ahd_msg_flags msg_flags; 1041 ahd_msg_type msg_type; 1042 uint8_t msgout_buf[12];/* Message we are sending */ 1043 uint8_t msgin_buf[12];/* Message we are receiving */ 1044 u_int msgout_len; /* Length of message to send */ 1045 u_int msgout_index; /* Current index in msgout */ 1046 u_int msgin_index; /* Current index in msgin */ 1047 1048 /* 1049 * Mapping information for data structures shared 1050 * between the sequencer and kernel. 1051 */ 1052 bus_dma_tag_t parent_dmat; 1053 bus_dma_tag_t shared_data_dmat; 1054 bus_dmamap_t shared_data_dmamap; 1055 bus_addr_t shared_data_busaddr; 1056 1057 /* Information saved through suspend/resume cycles */ 1058 struct ahd_suspend_state suspend_state; 1059 1060 /* Number of enabled target mode device on this card */ 1061 u_int enabled_luns; 1062 1063 /* Initialization level of this data structure */ 1064 u_int init_level; 1065 1066 /* PCI cacheline size. */ 1067 u_int pci_cachesize; 1068 1069 /* Per-Unit descriptive information */ 1070 const char *description; 1071 const char *bus_description; 1072 char *name; 1073 int unit; 1074 1075 /* Selection Timer settings */ 1076 int seltime; 1077 1078 uint16_t user_discenable;/* Disconnection allowed */ 1079 uint16_t user_tagenable;/* Tagged Queuing allowed */ 1080 }; 1081 1082 TAILQ_HEAD(ahd_softc_tailq, ahd_softc); 1083 extern struct ahd_softc_tailq ahd_tailq; 1084 1085 /************************ Active Device Information ***************************/ 1086 typedef enum { 1087 ROLE_UNKNOWN, 1088 ROLE_INITIATOR, 1089 ROLE_TARGET 1090 } role_t; 1091 1092 struct ahd_devinfo { 1093 int our_scsiid; 1094 int target_offset; 1095 uint16_t target_mask; 1096 u_int target; 1097 u_int lun; 1098 char channel; 1099 role_t role; /* 1100 * Only guaranteed to be correct if not 1101 * in the busfree state. 1102 */ 1103 }; 1104 1105 /****************************** PCI Structures ********************************/ 1106 #define AHD_PCI_IOADDR0 PCIR_MAPS /* I/O BAR*/ 1107 #define AHD_PCI_MEMADDR (PCIR_MAPS + 4) /* Memory BAR */ 1108 #define AHD_PCI_IOADDR1 (PCIR_MAPS + 12)/* Second I/O BAR */ 1109 1110 typedef int (ahd_device_setup_t)(struct ahd_softc *); 1111 1112 struct ahd_pci_identity { 1113 uint64_t full_id; 1114 uint64_t id_mask; 1115 char *name; 1116 ahd_device_setup_t *setup; 1117 }; 1118 extern struct ahd_pci_identity ahd_pci_ident_table []; 1119 extern const u_int ahd_num_pci_devs; 1120 1121 /***************************** VL/EISA Declarations ***************************/ 1122 struct aic7770_identity { 1123 uint32_t full_id; 1124 uint32_t id_mask; 1125 char *name; 1126 ahd_device_setup_t *setup; 1127 }; 1128 extern struct aic7770_identity aic7770_ident_table []; 1129 extern const int ahd_num_aic7770_devs; 1130 1131 #define AHD_EISA_SLOT_OFFSET 0xc00 1132 #define AHD_EISA_IOSIZE 0x100 1133 1134 /*************************** Function Declarations ****************************/ 1135 /******************************************************************************/ 1136 u_int ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl); 1137 void ahd_busy_tcl(struct ahd_softc *ahd, 1138 u_int tcl, u_int busyid); 1139 static __inline void ahd_unbusy_tcl(struct ahd_softc *ahd, u_int tcl); 1140 static __inline void 1141 ahd_unbusy_tcl(struct ahd_softc *ahd, u_int tcl) 1142 { 1143 ahd_busy_tcl(ahd, tcl, SCB_LIST_NULL); 1144 } 1145 1146 /***************************** PCI Front End *********************************/ 1147 struct ahd_pci_identity *ahd_find_pci_device(ahd_dev_softc_t); 1148 int ahd_pci_config(struct ahd_softc *, 1149 struct ahd_pci_identity *); 1150 1151 /*************************** EISA/VL Front End ********************************/ 1152 struct aic7770_identity *aic7770_find_device(uint32_t); 1153 int aic7770_config(struct ahd_softc *ahd, 1154 struct aic7770_identity *); 1155 1156 /************************** SCB and SCB queue management **********************/ 1157 int ahd_probe_scbs(struct ahd_softc *); 1158 void ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, 1159 struct scb *scb); 1160 int ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, 1161 int target, char channel, int lun, 1162 u_int tag, role_t role); 1163 1164 /****************************** Initialization ********************************/ 1165 struct ahd_softc *ahd_alloc(void *platform_arg, char *name); 1166 int ahd_softc_init(struct ahd_softc *); 1167 void ahd_controller_info(struct ahd_softc *ahd, char *buf); 1168 int ahd_init(struct ahd_softc *ahd); 1169 int ahd_default_config(struct ahd_softc *ahd); 1170 int ahd_parse_cfgdata(struct ahd_softc *ahd, 1171 struct seeprom_config *sc); 1172 void ahd_intr_enable(struct ahd_softc *ahd, int enable); 1173 void ahd_pause_and_flushwork(struct ahd_softc *ahd); 1174 int ahd_suspend(struct ahd_softc *ahd); 1175 int ahd_resume(struct ahd_softc *ahd); 1176 void ahd_softc_insert(struct ahd_softc *); 1177 struct ahd_softc *ahd_find_softc(struct ahd_softc *ahd); 1178 void ahd_set_unit(struct ahd_softc *, int); 1179 void ahd_set_name(struct ahd_softc *, char *); 1180 struct scb *ahd_get_scb(struct ahd_softc *ahd, u_int col_idx); 1181 void ahd_free_scb(struct ahd_softc *ahd, struct scb *scb); 1182 void ahd_alloc_scbs(struct ahd_softc *ahd); 1183 void ahd_free(struct ahd_softc *ahd); 1184 int ahd_reset(struct ahd_softc *ahd); 1185 void ahd_shutdown(void *arg); 1186 int ahd_write_flexport(struct ahd_softc *ahd, 1187 u_int addr, u_int value); 1188 int ahd_read_flexport(struct ahd_softc *ahd, u_int addr, 1189 uint8_t *value); 1190 int ahd_wait_flexport(struct ahd_softc *ahd); 1191 1192 /*************************** Interrupt Services *******************************/ 1193 void ahd_pci_intr(struct ahd_softc *ahd); 1194 void ahd_clear_intstat(struct ahd_softc *ahd); 1195 void ahd_run_qoutfifo(struct ahd_softc *ahd); 1196 #ifdef AHD_TARGET_MODE 1197 void ahd_run_tqinfifo(struct ahd_softc *ahd, int paused); 1198 #endif 1199 void ahd_handle_hwerrint(struct ahd_softc *ahd); 1200 void ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat); 1201 void ahd_handle_scsiint(struct ahd_softc *ahd, 1202 u_int intstat); 1203 void ahd_clear_critical_section(struct ahd_softc *ahd); 1204 1205 /***************************** Error Recovery *********************************/ 1206 typedef enum { 1207 SEARCH_COMPLETE, 1208 SEARCH_COUNT, 1209 SEARCH_REMOVE, 1210 SEARCH_PRINT 1211 } ahd_search_action; 1212 int ahd_search_qinfifo(struct ahd_softc *ahd, int target, 1213 char channel, int lun, u_int tag, 1214 role_t role, uint32_t status, 1215 ahd_search_action action); 1216 int ahd_search_disc_list(struct ahd_softc *ahd, int target, 1217 char channel, int lun, u_int tag, 1218 int stop_on_first, int remove, 1219 int save_state); 1220 void ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb); 1221 int ahd_reset_channel(struct ahd_softc *ahd, char channel, 1222 int initiate_reset); 1223 int ahd_abort_scbs(struct ahd_softc *ahd, int target, 1224 char channel, int lun, u_int tag, 1225 role_t role, uint32_t status); 1226 void ahd_restart(struct ahd_softc *ahd); 1227 void ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo); 1228 void ahd_handle_scb_status(struct ahd_softc *ahd, 1229 struct scb *scb); 1230 void ahd_handle_scsi_status(struct ahd_softc *ahd, 1231 struct scb *scb); 1232 void ahd_calc_residual(struct ahd_softc *ahd, 1233 struct scb *scb); 1234 /*************************** Utility Functions ********************************/ 1235 struct ahd_phase_table_entry* 1236 ahd_lookup_phase_entry(int phase); 1237 void ahd_compile_devinfo(struct ahd_devinfo *devinfo, 1238 u_int our_id, u_int target, 1239 u_int lun, char channel, 1240 role_t role); 1241 /************************** Transfer Negotiation ******************************/ 1242 void ahd_find_syncrate(struct ahd_softc *ahd, u_int *period, 1243 u_int *ppr_options, u_int maxsync); 1244 void ahd_validate_offset(struct ahd_softc *ahd, 1245 struct ahd_initiator_tinfo *tinfo, 1246 u_int period, u_int *offset, 1247 int wide, role_t role); 1248 void ahd_validate_width(struct ahd_softc *ahd, 1249 struct ahd_initiator_tinfo *tinfo, 1250 u_int *bus_width, 1251 role_t role); 1252 int ahd_update_neg_request(struct ahd_softc*, 1253 struct ahd_devinfo*, 1254 struct ahd_tmode_tstate*, 1255 struct ahd_initiator_tinfo*, 1256 int /*force*/); 1257 void ahd_set_width(struct ahd_softc *ahd, 1258 struct ahd_devinfo *devinfo, 1259 u_int width, u_int type, int paused); 1260 void ahd_set_syncrate(struct ahd_softc *ahd, 1261 struct ahd_devinfo *devinfo, 1262 u_int period, u_int offset, 1263 u_int ppr_options, 1264 u_int type, int paused); 1265 typedef enum { 1266 AHD_QUEUE_NONE, 1267 AHD_QUEUE_BASIC, 1268 AHD_QUEUE_TAGGED 1269 } ahd_queue_alg; 1270 1271 void ahd_set_tags(struct ahd_softc *ahd, 1272 struct ahd_devinfo *devinfo, 1273 ahd_queue_alg alg); 1274 1275 /**************************** Target Mode *************************************/ 1276 #ifdef AHD_TARGET_MODE 1277 void ahd_send_lstate_events(struct ahd_softc *, 1278 struct ahd_tmode_lstate *); 1279 void ahd_handle_en_lun(struct ahd_softc *ahd, 1280 struct cam_sim *sim, union ccb *ccb); 1281 cam_status ahd_find_tmode_devs(struct ahd_softc *ahd, 1282 struct cam_sim *sim, union ccb *ccb, 1283 struct ahd_tmode_tstate **tstate, 1284 struct ahd_tmode_lstate **lstate, 1285 int notfound_failure); 1286 #ifndef AHD_TMODE_ENABLE 1287 #define AHD_TMODE_ENABLE 0 1288 #endif 1289 #endif 1290 /******************************* Debug ***************************************/ 1291 #ifdef AHD_DEBUG 1292 extern uint32_t ahd_debug; 1293 #define AHD_SHOW_MISC 0x0001 1294 #define AHD_SHOW_SENSE 0x0002 1295 #define AHD_DUMP_SEEPROM 0x0004 1296 #define AHD_SHOW_TERMCTL 0x0008 1297 #define AHD_SHOW_MEMORY 0x0010 1298 #define AHD_SHOW_MESSAGES 0x0020 1299 #define AHD_SHOW_MODEPTR 0x0040 1300 #define AHD_SHOW_SELTO 0x0080 1301 #define AHD_SHOW_FIFOS 0x0100 1302 #define AHD_SHOW_QFULL 0x0200 1303 #define AHD_SHOW_QUEUE 0x0400 1304 #define AHD_SHOW_TQIN 0x0800 1305 #define AHD_SHOW_SG 0x1000 1306 #define AHD_DEBUG_SEQUENCER 0x2000 1307 #endif 1308 void ahd_print_scb(struct scb *scb); 1309 void ahd_dump_sglist(struct scb *scb); 1310 void ahd_dump_all_cards_state(void); 1311 void ahd_dump_card_state(struct ahd_softc *ahd); 1312 int ahd_print_register(ahd_reg_parse_entry_t *table, 1313 u_int num_entries, 1314 const char *name, 1315 u_int address, 1316 u_int value, 1317 u_int *cur_column, 1318 u_int wrap_point); 1319 void ahd_dump_scbs(struct ahd_softc *ahd); 1320 #endif /* _AIC79XX_H_ */ 1321