1 /*- 2 * Core routines and tables shareable across OS platforms. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 * 6 * Copyright (c) 1994-2002, 2004 Justin T. Gibbs. 7 * Copyright (c) 2000-2003 Adaptec Inc. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions, and the following disclaimer, 15 * without modification. 16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 17 * substantially similar to the "NO WARRANTY" disclaimer below 18 * ("Disclaimer") and any redistribution must be conditioned upon 19 * including a substantially similar Disclaimer requirement for further 20 * binary redistribution. 21 * 3. Neither the names of the above-listed copyright holders nor the names 22 * of any contributors may be used to endorse or promote products derived 23 * from this software without specific prior written permission. 24 * 25 * Alternatively, this software may be distributed under the terms of the 26 * GNU General Public License ("GPL") version 2 as published by the Free 27 * Software Foundation. 28 * 29 * NO WARRANTY 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 34 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 35 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 36 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 37 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 38 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 39 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 40 * POSSIBILITY OF SUCH DAMAGES. 41 * 42 * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#246 $ 43 */ 44 45 #ifdef __linux__ 46 #include "aic79xx_osm.h" 47 #include "aic79xx_inline.h" 48 #include "aicasm/aicasm_insformat.h" 49 #else 50 #include <sys/cdefs.h> 51 __FBSDID("$FreeBSD$"); 52 #include <dev/aic7xxx/aic79xx_osm.h> 53 #include <dev/aic7xxx/aic79xx_inline.h> 54 #include <dev/aic7xxx/aicasm/aicasm_insformat.h> 55 #endif 56 57 /******************************** Globals *************************************/ 58 struct ahd_softc_tailq ahd_tailq = TAILQ_HEAD_INITIALIZER(ahd_tailq); 59 uint32_t ahd_attach_to_HostRAID_controllers = 1; 60 61 /***************************** Lookup Tables **********************************/ 62 char *ahd_chip_names[] = 63 { 64 "NONE", 65 "aic7901", 66 "aic7902", 67 "aic7901A" 68 }; 69 70 /* 71 * Hardware error codes. 72 */ 73 struct ahd_hard_error_entry { 74 uint8_t errno; 75 char *errmesg; 76 }; 77 78 static struct ahd_hard_error_entry ahd_hard_errors[] = { 79 { DSCTMOUT, "Discard Timer has timed out" }, 80 { ILLOPCODE, "Illegal Opcode in sequencer program" }, 81 { SQPARERR, "Sequencer Parity Error" }, 82 { DPARERR, "Data-path Parity Error" }, 83 { MPARERR, "Scratch or SCB Memory Parity Error" }, 84 { CIOPARERR, "CIOBUS Parity Error" }, 85 }; 86 static const u_int num_errors = NUM_ELEMENTS(ahd_hard_errors); 87 88 static struct ahd_phase_table_entry ahd_phase_table[] = 89 { 90 { P_DATAOUT, MSG_NOOP, "in Data-out phase" }, 91 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" }, 92 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" }, 93 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" }, 94 { P_COMMAND, MSG_NOOP, "in Command phase" }, 95 { P_MESGOUT, MSG_NOOP, "in Message-out phase" }, 96 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" }, 97 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" }, 98 { P_BUSFREE, MSG_NOOP, "while idle" }, 99 { 0, MSG_NOOP, "in unknown phase" } 100 }; 101 102 /* 103 * In most cases we only wish to itterate over real phases, so 104 * exclude the last element from the count. 105 */ 106 static const u_int num_phases = NUM_ELEMENTS(ahd_phase_table) - 1; 107 108 /* Our Sequencer Program */ 109 #include "aic79xx_seq.h" 110 111 /**************************** Function Declarations ***************************/ 112 static void ahd_handle_transmission_error(struct ahd_softc *ahd); 113 static void ahd_handle_lqiphase_error(struct ahd_softc *ahd, 114 u_int lqistat1); 115 static int ahd_handle_pkt_busfree(struct ahd_softc *ahd, 116 u_int busfreetime); 117 static int ahd_handle_nonpkt_busfree(struct ahd_softc *ahd); 118 static void ahd_handle_proto_violation(struct ahd_softc *ahd); 119 static void ahd_force_renegotiation(struct ahd_softc *ahd, 120 struct ahd_devinfo *devinfo); 121 122 static struct ahd_tmode_tstate* 123 ahd_alloc_tstate(struct ahd_softc *ahd, 124 u_int scsi_id, char channel); 125 #ifdef AHD_TARGET_MODE 126 static void ahd_free_tstate(struct ahd_softc *ahd, 127 u_int scsi_id, char channel, int force); 128 #endif 129 static void ahd_devlimited_syncrate(struct ahd_softc *ahd, 130 struct ahd_initiator_tinfo *, 131 u_int *period, 132 u_int *ppr_options, 133 role_t role); 134 static void ahd_update_neg_table(struct ahd_softc *ahd, 135 struct ahd_devinfo *devinfo, 136 struct ahd_transinfo *tinfo); 137 static void ahd_update_pending_scbs(struct ahd_softc *ahd); 138 static void ahd_fetch_devinfo(struct ahd_softc *ahd, 139 struct ahd_devinfo *devinfo); 140 static void ahd_scb_devinfo(struct ahd_softc *ahd, 141 struct ahd_devinfo *devinfo, 142 struct scb *scb); 143 static void ahd_setup_initiator_msgout(struct ahd_softc *ahd, 144 struct ahd_devinfo *devinfo, 145 struct scb *scb); 146 static void ahd_build_transfer_msg(struct ahd_softc *ahd, 147 struct ahd_devinfo *devinfo); 148 static void ahd_construct_sdtr(struct ahd_softc *ahd, 149 struct ahd_devinfo *devinfo, 150 u_int period, u_int offset); 151 static void ahd_construct_wdtr(struct ahd_softc *ahd, 152 struct ahd_devinfo *devinfo, 153 u_int bus_width); 154 static void ahd_construct_ppr(struct ahd_softc *ahd, 155 struct ahd_devinfo *devinfo, 156 u_int period, u_int offset, 157 u_int bus_width, u_int ppr_options); 158 static void ahd_clear_msg_state(struct ahd_softc *ahd); 159 static void ahd_handle_message_phase(struct ahd_softc *ahd); 160 typedef enum { 161 AHDMSG_1B, 162 AHDMSG_2B, 163 AHDMSG_EXT 164 } ahd_msgtype; 165 static int ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, 166 u_int msgval, int full); 167 static int ahd_parse_msg(struct ahd_softc *ahd, 168 struct ahd_devinfo *devinfo); 169 static int ahd_handle_msg_reject(struct ahd_softc *ahd, 170 struct ahd_devinfo *devinfo); 171 static void ahd_handle_ign_wide_residue(struct ahd_softc *ahd, 172 struct ahd_devinfo *devinfo); 173 static void ahd_reinitialize_dataptrs(struct ahd_softc *ahd); 174 static void ahd_handle_devreset(struct ahd_softc *ahd, 175 struct ahd_devinfo *devinfo, 176 u_int lun, cam_status status, 177 char *message, int verbose_level); 178 #ifdef AHD_TARGET_MODE 179 static void ahd_setup_target_msgin(struct ahd_softc *ahd, 180 struct ahd_devinfo *devinfo, 181 struct scb *scb); 182 #endif 183 184 static u_int ahd_sglist_size(struct ahd_softc *ahd); 185 static u_int ahd_sglist_allocsize(struct ahd_softc *ahd); 186 static bus_dmamap_callback_t 187 ahd_dmamap_cb; 188 static void ahd_initialize_hscbs(struct ahd_softc *ahd); 189 static int ahd_init_scbdata(struct ahd_softc *ahd); 190 static void ahd_fini_scbdata(struct ahd_softc *ahd); 191 static void ahd_setup_iocell_workaround(struct ahd_softc *ahd); 192 static void ahd_iocell_first_selection(struct ahd_softc *ahd); 193 static void ahd_add_col_list(struct ahd_softc *ahd, 194 struct scb *scb, u_int col_idx); 195 static void ahd_rem_col_list(struct ahd_softc *ahd, 196 struct scb *scb); 197 static void ahd_chip_init(struct ahd_softc *ahd); 198 static void ahd_qinfifo_requeue(struct ahd_softc *ahd, 199 struct scb *prev_scb, 200 struct scb *scb); 201 static int ahd_qinfifo_count(struct ahd_softc *ahd); 202 static int ahd_search_scb_list(struct ahd_softc *ahd, int target, 203 char channel, int lun, u_int tag, 204 role_t role, uint32_t status, 205 ahd_search_action action, 206 u_int *list_head, u_int *list_tail, 207 u_int tid); 208 static void ahd_stitch_tid_list(struct ahd_softc *ahd, 209 u_int tid_prev, u_int tid_cur, 210 u_int tid_next); 211 static void ahd_add_scb_to_free_list(struct ahd_softc *ahd, 212 u_int scbid); 213 static u_int ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 214 u_int prev, u_int next, u_int tid); 215 static void ahd_reset_current_bus(struct ahd_softc *ahd); 216 static ahd_callback_t ahd_reset_poll; 217 static ahd_callback_t ahd_stat_timer; 218 #ifdef AHD_DUMP_SEQ 219 static void ahd_dumpseq(struct ahd_softc *ahd); 220 #endif 221 static void ahd_loadseq(struct ahd_softc *ahd); 222 static int ahd_check_patch(struct ahd_softc *ahd, 223 struct patch **start_patch, 224 u_int start_instr, u_int *skip_addr); 225 static u_int ahd_resolve_seqaddr(struct ahd_softc *ahd, 226 u_int address); 227 static void ahd_download_instr(struct ahd_softc *ahd, 228 u_int instrptr, uint8_t *dconsts); 229 static int ahd_probe_stack_size(struct ahd_softc *ahd); 230 static int ahd_other_scb_timeout(struct ahd_softc *ahd, 231 struct scb *scb, 232 struct scb *other_scb); 233 static int ahd_scb_active_in_fifo(struct ahd_softc *ahd, 234 struct scb *scb); 235 static void ahd_run_data_fifo(struct ahd_softc *ahd, 236 struct scb *scb); 237 238 #ifdef AHD_TARGET_MODE 239 static void ahd_queue_lstate_event(struct ahd_softc *ahd, 240 struct ahd_tmode_lstate *lstate, 241 u_int initiator_id, 242 u_int event_type, 243 u_int event_arg); 244 static void ahd_update_scsiid(struct ahd_softc *ahd, 245 u_int targid_mask); 246 static int ahd_handle_target_cmd(struct ahd_softc *ahd, 247 struct target_cmd *cmd); 248 #endif 249 250 /******************************** Private Inlines *****************************/ 251 static __inline void ahd_assert_atn(struct ahd_softc *ahd); 252 static __inline int ahd_currently_packetized(struct ahd_softc *ahd); 253 static __inline int ahd_set_active_fifo(struct ahd_softc *ahd); 254 255 static __inline void 256 ahd_assert_atn(struct ahd_softc *ahd) 257 { 258 ahd_outb(ahd, SCSISIGO, ATNO); 259 } 260 261 /* 262 * Determine if the current connection has a packetized 263 * agreement. This does not necessarily mean that we 264 * are currently in a packetized transfer. We could 265 * just as easily be sending or receiving a message. 266 */ 267 static __inline int 268 ahd_currently_packetized(struct ahd_softc *ahd) 269 { 270 ahd_mode_state saved_modes; 271 int packetized; 272 273 saved_modes = ahd_save_modes(ahd); 274 if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) { 275 /* 276 * The packetized bit refers to the last 277 * connection, not the current one. Check 278 * for non-zero LQISTATE instead. 279 */ 280 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 281 packetized = ahd_inb(ahd, LQISTATE) != 0; 282 } else { 283 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 284 packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED; 285 } 286 ahd_restore_modes(ahd, saved_modes); 287 return (packetized); 288 } 289 290 static __inline int 291 ahd_set_active_fifo(struct ahd_softc *ahd) 292 { 293 u_int active_fifo; 294 295 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 296 active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 297 switch (active_fifo) { 298 case 0: 299 case 1: 300 ahd_set_modes(ahd, active_fifo, active_fifo); 301 return (1); 302 default: 303 return (0); 304 } 305 } 306 307 /************************* Sequencer Execution Control ************************/ 308 /* 309 * Restart the sequencer program from address zero 310 */ 311 void 312 ahd_restart(struct ahd_softc *ahd) 313 { 314 315 ahd_pause(ahd); 316 317 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 318 319 /* No more pending messages */ 320 ahd_clear_msg_state(ahd); 321 ahd_outb(ahd, SCSISIGO, 0); /* De-assert BSY */ 322 ahd_outb(ahd, MSG_OUT, MSG_NOOP); /* No message to send */ 323 ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET); 324 ahd_outb(ahd, SEQINTCTL, 0); 325 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 326 ahd_outb(ahd, SEQ_FLAGS, 0); 327 ahd_outb(ahd, SAVED_SCSIID, 0xFF); 328 ahd_outb(ahd, SAVED_LUN, 0xFF); 329 330 /* 331 * Ensure that the sequencer's idea of TQINPOS 332 * matches our own. The sequencer increments TQINPOS 333 * only after it sees a DMA complete and a reset could 334 * occur before the increment leaving the kernel to believe 335 * the command arrived but the sequencer to not. 336 */ 337 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 338 339 /* Always allow reselection */ 340 ahd_outb(ahd, SCSISEQ1, 341 ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP)); 342 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 343 344 /* 345 * Clear any pending sequencer interrupt. It is no 346 * longer relevant since we're resetting the Program 347 * Counter. 348 */ 349 ahd_outb(ahd, CLRINT, CLRSEQINT); 350 351 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 352 ahd_unpause(ahd); 353 } 354 355 void 356 ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo) 357 { 358 ahd_mode_state saved_modes; 359 360 #ifdef AHD_DEBUG 361 if ((ahd_debug & AHD_SHOW_FIFOS) != 0) 362 printf("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo); 363 #endif 364 saved_modes = ahd_save_modes(ahd); 365 ahd_set_modes(ahd, fifo, fifo); 366 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 367 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 368 ahd_outb(ahd, CCSGCTL, CCSGRESET); 369 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 370 ahd_outb(ahd, SG_STATE, 0); 371 ahd_restore_modes(ahd, saved_modes); 372 } 373 374 /************************* Input/Output Queues ********************************/ 375 /* 376 * Flush and completed commands that are sitting in the command 377 * complete queues down on the chip but have yet to be dma'ed back up. 378 */ 379 void 380 ahd_flush_qoutfifo(struct ahd_softc *ahd) 381 { 382 struct scb *scb; 383 ahd_mode_state saved_modes; 384 u_int saved_scbptr; 385 u_int ccscbctl; 386 u_int scbid; 387 u_int next_scbid; 388 389 saved_modes = ahd_save_modes(ahd); 390 391 /* 392 * Flush the good status FIFO for completed packetized commands. 393 */ 394 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 395 saved_scbptr = ahd_get_scbptr(ahd); 396 while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) { 397 u_int fifo_mode; 398 u_int i; 399 400 scbid = ahd_inw(ahd, GSFIFO); 401 scb = ahd_lookup_scb(ahd, scbid); 402 if (scb == NULL) { 403 printf("%s: Warning - GSFIFO SCB %d invalid\n", 404 ahd_name(ahd), scbid); 405 AHD_CORRECTABLE_ERROR(ahd); 406 continue; 407 } 408 /* 409 * Determine if this transaction is still active in 410 * any FIFO. If it is, we must flush that FIFO to 411 * the host before completing the command. 412 */ 413 fifo_mode = 0; 414 rescan_fifos: 415 for (i = 0; i < 2; i++) { 416 /* Toggle to the other mode. */ 417 fifo_mode ^= 1; 418 ahd_set_modes(ahd, fifo_mode, fifo_mode); 419 420 if (ahd_scb_active_in_fifo(ahd, scb) == 0) 421 continue; 422 423 ahd_run_data_fifo(ahd, scb); 424 425 /* 426 * Running this FIFO may cause a CFG4DATA for 427 * this same transaction to assert in the other 428 * FIFO or a new snapshot SAVEPTRS interrupt 429 * in this FIFO. Even running a FIFO may not 430 * clear the transaction if we are still waiting 431 * for data to drain to the host. We must loop 432 * until the transaction is not active in either 433 * FIFO just to be sure. Reset our loop counter 434 * so we will visit both FIFOs again before 435 * declaring this transaction finished. We 436 * also delay a bit so that status has a chance 437 * to change before we look at this FIFO again. 438 */ 439 aic_delay(200); 440 goto rescan_fifos; 441 } 442 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 443 ahd_set_scbptr(ahd, scbid); 444 if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0 445 && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0 446 || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR) 447 & SG_LIST_NULL) != 0)) { 448 u_int comp_head; 449 450 /* 451 * The transfer completed with a residual. 452 * Place this SCB on the complete DMA list 453 * so that we update our in-core copy of the 454 * SCB before completing the command. 455 */ 456 ahd_outb(ahd, SCB_SCSI_STATUS, 0); 457 ahd_outb(ahd, SCB_SGPTR, 458 ahd_inb_scbram(ahd, SCB_SGPTR) 459 | SG_STATUS_VALID); 460 ahd_outw(ahd, SCB_TAG, scbid); 461 ahd_outw(ahd, SCB_NEXT_COMPLETE, SCB_LIST_NULL); 462 comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 463 if (SCBID_IS_NULL(comp_head)) { 464 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, scbid); 465 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); 466 } else { 467 u_int tail; 468 469 tail = ahd_inw(ahd, COMPLETE_DMA_SCB_TAIL); 470 ahd_set_scbptr(ahd, tail); 471 ahd_outw(ahd, SCB_NEXT_COMPLETE, scbid); 472 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); 473 ahd_set_scbptr(ahd, scbid); 474 } 475 } else 476 ahd_complete_scb(ahd, scb); 477 } 478 ahd_set_scbptr(ahd, saved_scbptr); 479 480 /* 481 * Setup for command channel portion of flush. 482 */ 483 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 484 485 /* 486 * Wait for any inprogress DMA to complete and clear DMA state 487 * if this if for an SCB in the qinfifo. 488 */ 489 while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) { 490 if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) { 491 if ((ccscbctl & ARRDONE) != 0) 492 break; 493 } else if ((ccscbctl & CCSCBDONE) != 0) 494 break; 495 aic_delay(200); 496 } 497 /* 498 * We leave the sequencer to cleanup in the case of DMA's to 499 * update the qoutfifo. In all other cases (DMA's to the 500 * chip or a push of an SCB from the COMPLETE_DMA_SCB list), 501 * we disable the DMA engine so that the sequencer will not 502 * attempt to handle the DMA completion. 503 */ 504 if ((ccscbctl & CCSCBDIR) != 0 || (ccscbctl & ARRDONE) != 0) 505 ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN)); 506 507 /* 508 * Complete any SCBs that just finished 509 * being DMA'ed into the qoutfifo. 510 */ 511 ahd_run_qoutfifo(ahd); 512 513 saved_scbptr = ahd_get_scbptr(ahd); 514 /* 515 * Manually update/complete any completed SCBs that are waiting to be 516 * DMA'ed back up to the host. 517 */ 518 scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 519 while (!SCBID_IS_NULL(scbid)) { 520 uint8_t *hscb_ptr; 521 u_int i; 522 523 ahd_set_scbptr(ahd, scbid); 524 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 525 scb = ahd_lookup_scb(ahd, scbid); 526 if (scb == NULL) { 527 printf("%s: Warning - DMA-up and complete " 528 "SCB %d invalid\n", ahd_name(ahd), scbid); 529 AHD_CORRECTABLE_ERROR(ahd); 530 continue; 531 } 532 hscb_ptr = (uint8_t *)scb->hscb; 533 for (i = 0; i < sizeof(struct hardware_scb); i++) 534 *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i); 535 536 ahd_complete_scb(ahd, scb); 537 scbid = next_scbid; 538 } 539 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 540 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); 541 542 scbid = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); 543 while (!SCBID_IS_NULL(scbid)) { 544 ahd_set_scbptr(ahd, scbid); 545 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 546 scb = ahd_lookup_scb(ahd, scbid); 547 if (scb == NULL) { 548 printf("%s: Warning - Complete Qfrz SCB %d invalid\n", 549 ahd_name(ahd), scbid); 550 AHD_CORRECTABLE_ERROR(ahd); 551 continue; 552 } 553 554 ahd_complete_scb(ahd, scb); 555 scbid = next_scbid; 556 } 557 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); 558 559 scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD); 560 while (!SCBID_IS_NULL(scbid)) { 561 ahd_set_scbptr(ahd, scbid); 562 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 563 scb = ahd_lookup_scb(ahd, scbid); 564 if (scb == NULL) { 565 printf("%s: Warning - Complete SCB %d invalid\n", 566 ahd_name(ahd), scbid); 567 AHD_CORRECTABLE_ERROR(ahd); 568 continue; 569 } 570 571 ahd_complete_scb(ahd, scb); 572 scbid = next_scbid; 573 } 574 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 575 576 /* 577 * Restore state. 578 */ 579 ahd_set_scbptr(ahd, saved_scbptr); 580 ahd_restore_modes(ahd, saved_modes); 581 ahd->flags |= AHD_UPDATE_PEND_CMDS; 582 } 583 584 /* 585 * Determine if an SCB for a packetized transaction 586 * is active in a FIFO. 587 */ 588 static int 589 ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb) 590 { 591 592 /* 593 * The FIFO is only active for our transaction if 594 * the SCBPTR matches the SCB's ID and the firmware 595 * has installed a handler for the FIFO or we have 596 * a pending SAVEPTRS or CFG4DATA interrupt. 597 */ 598 if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb) 599 || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0 600 && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0)) 601 return (0); 602 603 return (1); 604 } 605 606 /* 607 * Run a data fifo to completion for a transaction we know 608 * has completed across the SCSI bus (good status has been 609 * received). We are already set to the correct FIFO mode 610 * on entry to this routine. 611 * 612 * This function attempts to operate exactly as the firmware 613 * would when running this FIFO. Care must be taken to update 614 * this routine any time the firmware's FIFO algorithm is 615 * changed. 616 */ 617 static void 618 ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb) 619 { 620 u_int seqintsrc; 621 622 seqintsrc = ahd_inb(ahd, SEQINTSRC); 623 if ((seqintsrc & CFG4DATA) != 0) { 624 uint32_t datacnt; 625 uint32_t sgptr; 626 627 /* 628 * Clear full residual flag. 629 */ 630 sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID; 631 ahd_outb(ahd, SCB_SGPTR, sgptr); 632 633 /* 634 * Load datacnt and address. 635 */ 636 datacnt = ahd_inl_scbram(ahd, SCB_DATACNT); 637 if ((datacnt & AHD_DMA_LAST_SEG) != 0) { 638 sgptr |= LAST_SEG; 639 ahd_outb(ahd, SG_STATE, 0); 640 } else 641 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 642 ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR)); 643 ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK); 644 ahd_outb(ahd, SG_CACHE_PRE, sgptr); 645 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 646 647 /* 648 * Initialize Residual Fields. 649 */ 650 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24); 651 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK); 652 653 /* 654 * Mark the SCB as having a FIFO in use. 655 */ 656 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 657 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1); 658 659 /* 660 * Install a "fake" handler for this FIFO. 661 */ 662 ahd_outw(ahd, LONGJMP_ADDR, 0); 663 664 /* 665 * Notify the hardware that we have satisfied 666 * this sequencer interrupt. 667 */ 668 ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA); 669 } else if ((seqintsrc & SAVEPTRS) != 0) { 670 uint32_t sgptr; 671 uint32_t resid; 672 673 if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) { 674 /* 675 * Snapshot Save Pointers. All that 676 * is necessary to clear the snapshot 677 * is a CLRCHN. 678 */ 679 goto clrchn; 680 } 681 682 /* 683 * Disable S/G fetch so the DMA engine 684 * is available to future users. 685 */ 686 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 687 ahd_outb(ahd, CCSGCTL, 0); 688 ahd_outb(ahd, SG_STATE, 0); 689 690 /* 691 * Flush the data FIFO. Strickly only 692 * necessary for Rev A parts. 693 */ 694 ahd_outb(ahd, DFCNTRL, ahd_inb(ahd, DFCNTRL) | FIFOFLUSH); 695 696 /* 697 * Calculate residual. 698 */ 699 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 700 resid = ahd_inl(ahd, SHCNT); 701 resid |= ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24; 702 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid); 703 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) { 704 /* 705 * Must back up to the correct S/G element. 706 * Typically this just means resetting our 707 * low byte to the offset in the SG_CACHE, 708 * but if we wrapped, we have to correct 709 * the other bytes of the sgptr too. 710 */ 711 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0 712 && (sgptr & 0x80) == 0) 713 sgptr -= 0x100; 714 sgptr &= ~0xFF; 715 sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW) 716 & SG_ADDR_MASK; 717 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 718 ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0); 719 } else if ((resid & AHD_SG_LEN_MASK) == 0) { 720 ahd_outb(ahd, SCB_RESIDUAL_SGPTR, 721 sgptr | SG_LIST_NULL); 722 } 723 /* 724 * Save Pointers. 725 */ 726 ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR)); 727 ahd_outl(ahd, SCB_DATACNT, resid); 728 ahd_outl(ahd, SCB_SGPTR, sgptr); 729 ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS); 730 ahd_outb(ahd, SEQIMODE, 731 ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS); 732 /* 733 * If the data is to the SCSI bus, we are 734 * done, otherwise wait for FIFOEMP. 735 */ 736 if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0) 737 goto clrchn; 738 } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) { 739 uint32_t sgptr; 740 uint64_t data_addr; 741 uint32_t data_len; 742 u_int dfcntrl; 743 744 /* 745 * Disable S/G fetch so the DMA engine 746 * is available to future users. We won't 747 * be using the DMA engine to load segments. 748 */ 749 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) { 750 ahd_outb(ahd, CCSGCTL, 0); 751 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 752 } 753 754 /* 755 * Wait for the DMA engine to notice that the 756 * host transfer is enabled and that there is 757 * space in the S/G FIFO for new segments before 758 * loading more segments. 759 */ 760 if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) != 0 761 && (ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) { 762 /* 763 * Determine the offset of the next S/G 764 * element to load. 765 */ 766 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 767 sgptr &= SG_PTR_MASK; 768 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 769 struct ahd_dma64_seg *sg; 770 771 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 772 data_addr = sg->addr; 773 data_len = sg->len; 774 sgptr += sizeof(*sg); 775 } else { 776 struct ahd_dma_seg *sg; 777 778 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 779 data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK; 780 data_addr <<= 8; 781 data_addr |= sg->addr; 782 data_len = sg->len; 783 sgptr += sizeof(*sg); 784 } 785 786 /* 787 * Update residual information. 788 */ 789 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24); 790 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 791 792 /* 793 * Load the S/G. 794 */ 795 if (data_len & AHD_DMA_LAST_SEG) { 796 sgptr |= LAST_SEG; 797 ahd_outb(ahd, SG_STATE, 0); 798 } 799 ahd_outq(ahd, HADDR, data_addr); 800 ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK); 801 ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF); 802 803 /* 804 * Advertise the segment to the hardware. 805 */ 806 dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN; 807 if ((ahd->features & AHD_NEW_DFCNTRL_OPTS) != 0) { 808 /* 809 * Use SCSIENWRDIS so that SCSIEN 810 * is never modified by this 811 * operation. 812 */ 813 dfcntrl |= SCSIENWRDIS; 814 } 815 ahd_outb(ahd, DFCNTRL, dfcntrl); 816 } 817 } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG_DONE) != 0) { 818 /* 819 * Transfer completed to the end of SG list 820 * and has flushed to the host. 821 */ 822 ahd_outb(ahd, SCB_SGPTR, 823 ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL); 824 goto clrchn; 825 } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) { 826 clrchn: 827 /* 828 * Clear any handler for this FIFO, decrement 829 * the FIFO use count for the SCB, and release 830 * the FIFO. 831 */ 832 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 833 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 834 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1); 835 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 836 } 837 } 838 839 /* 840 * Look for entries in the QoutFIFO that have completed. 841 * The valid_tag completion field indicates the validity 842 * of the entry - the valid value toggles each time through 843 * the queue. We use the sg_status field in the completion 844 * entry to avoid referencing the hscb if the completion 845 * occurred with no errors and no residual. sg_status is 846 * a copy of the first byte (little endian) of the sgptr 847 * hscb field. 848 */ 849 void 850 ahd_run_qoutfifo(struct ahd_softc *ahd) 851 { 852 struct ahd_completion *completion; 853 struct scb *scb; 854 u_int scb_index; 855 856 if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0) 857 panic("ahd_run_qoutfifo recursion"); 858 ahd->flags |= AHD_RUNNING_QOUTFIFO; 859 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD); 860 for (;;) { 861 completion = &ahd->qoutfifo[ahd->qoutfifonext]; 862 863 if (completion->valid_tag != ahd->qoutfifonext_valid_tag) 864 break; 865 866 scb_index = aic_le16toh(completion->tag); 867 scb = ahd_lookup_scb(ahd, scb_index); 868 if (scb == NULL) { 869 printf("%s: WARNING no command for scb %d " 870 "(cmdcmplt)\nQOUTPOS = %d\n", 871 ahd_name(ahd), scb_index, 872 ahd->qoutfifonext); 873 AHD_CORRECTABLE_ERROR(ahd); 874 ahd_dump_card_state(ahd); 875 } else if ((completion->sg_status & SG_STATUS_VALID) != 0) { 876 ahd_handle_scb_status(ahd, scb); 877 } else { 878 ahd_done(ahd, scb); 879 } 880 881 ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1); 882 if (ahd->qoutfifonext == 0) 883 ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID; 884 } 885 ahd->flags &= ~AHD_RUNNING_QOUTFIFO; 886 } 887 888 /************************* Interrupt Handling *********************************/ 889 void 890 ahd_handle_hwerrint(struct ahd_softc *ahd) 891 { 892 /* 893 * Some catastrophic hardware error has occurred. 894 * Print it for the user and disable the controller. 895 */ 896 int i; 897 int error; 898 899 error = ahd_inb(ahd, ERROR); 900 for (i = 0; i < num_errors; i++) { 901 if ((error & ahd_hard_errors[i].errno) != 0) { 902 printf("%s: hwerrint, %s\n", 903 ahd_name(ahd), ahd_hard_errors[i].errmesg); 904 AHD_UNCORRECTABLE_ERROR(ahd); 905 } 906 } 907 908 ahd_dump_card_state(ahd); 909 panic("BRKADRINT"); 910 911 /* Tell everyone that this HBA is no longer available */ 912 ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 913 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN, 914 CAM_NO_HBA); 915 916 /* Tell the system that this controller has gone away. */ 917 ahd_free(ahd); 918 } 919 920 void 921 ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat) 922 { 923 u_int seqintcode; 924 925 /* 926 * Save the sequencer interrupt code and clear the SEQINT 927 * bit. We will unpause the sequencer, if appropriate, 928 * after servicing the request. 929 */ 930 seqintcode = ahd_inb(ahd, SEQINTCODE); 931 ahd_outb(ahd, CLRINT, CLRSEQINT); 932 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) { 933 /* 934 * Unpause the sequencer and let it clear 935 * SEQINT by writing NO_SEQINT to it. This 936 * will cause the sequencer to be paused again, 937 * which is the expected state of this routine. 938 */ 939 ahd_unpause(ahd); 940 while (!ahd_is_paused(ahd)) 941 ; 942 ahd_outb(ahd, CLRINT, CLRSEQINT); 943 } 944 ahd_update_modes(ahd); 945 #ifdef AHD_DEBUG 946 if ((ahd_debug & AHD_SHOW_MISC) != 0) 947 printf("%s: Handle Seqint Called for code %d\n", 948 ahd_name(ahd), seqintcode); 949 #endif 950 switch (seqintcode) { 951 case ENTERING_NONPACK: 952 { 953 struct scb *scb; 954 u_int scbid; 955 956 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 957 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 958 scbid = ahd_get_scbptr(ahd); 959 scb = ahd_lookup_scb(ahd, scbid); 960 if (scb == NULL) { 961 /* 962 * Somehow need to know if this 963 * is from a selection or reselection. 964 * From that, we can determine target 965 * ID so we at least have an I_T nexus. 966 */ 967 } else { 968 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 969 ahd_outb(ahd, SAVED_LUN, scb->hscb->lun); 970 ahd_outb(ahd, SEQ_FLAGS, 0x0); 971 } 972 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0 973 && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 974 /* 975 * Phase change after read stream with 976 * CRC error with P0 asserted on last 977 * packet. 978 */ 979 #ifdef AHD_DEBUG 980 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 981 printf("%s: Assuming LQIPHASE_NLQ with " 982 "P0 assertion\n", ahd_name(ahd)); 983 #endif 984 } 985 #ifdef AHD_DEBUG 986 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 987 printf("%s: Entering NONPACK\n", ahd_name(ahd)); 988 #endif 989 break; 990 } 991 case INVALID_SEQINT: 992 printf("%s: Invalid Sequencer interrupt occurred.\n", 993 ahd_name(ahd)); 994 ahd_dump_card_state(ahd); 995 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 996 AHD_UNCORRECTABLE_ERROR(ahd); 997 break; 998 case STATUS_OVERRUN: 999 { 1000 struct scb *scb; 1001 u_int scbid; 1002 1003 scbid = ahd_get_scbptr(ahd); 1004 scb = ahd_lookup_scb(ahd, scbid); 1005 if (scb != NULL) 1006 ahd_print_path(ahd, scb); 1007 else 1008 printf("%s: ", ahd_name(ahd)); 1009 printf("SCB %d Packetized Status Overrun", scbid); 1010 ahd_dump_card_state(ahd); 1011 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1012 AHD_UNCORRECTABLE_ERROR(ahd); 1013 break; 1014 } 1015 case CFG4ISTAT_INTR: 1016 { 1017 struct scb *scb; 1018 u_int scbid; 1019 1020 scbid = ahd_get_scbptr(ahd); 1021 scb = ahd_lookup_scb(ahd, scbid); 1022 if (scb == NULL) { 1023 ahd_dump_card_state(ahd); 1024 printf("CFG4ISTAT: Free SCB %d referenced", scbid); 1025 AHD_FATAL_ERROR(ahd); 1026 panic("For safety"); 1027 } 1028 ahd_outq(ahd, HADDR, scb->sense_busaddr); 1029 ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE); 1030 ahd_outb(ahd, HCNT + 2, 0); 1031 ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG); 1032 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 1033 break; 1034 } 1035 case ILLEGAL_PHASE: 1036 { 1037 u_int bus_phase; 1038 1039 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1040 printf("%s: ILLEGAL_PHASE 0x%x\n", 1041 ahd_name(ahd), bus_phase); 1042 1043 switch (bus_phase) { 1044 case P_DATAOUT: 1045 case P_DATAIN: 1046 case P_DATAOUT_DT: 1047 case P_DATAIN_DT: 1048 case P_MESGOUT: 1049 case P_STATUS: 1050 case P_MESGIN: 1051 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1052 printf("%s: Issued Bus Reset.\n", ahd_name(ahd)); 1053 AHD_UNCORRECTABLE_ERROR(ahd); 1054 break; 1055 case P_COMMAND: 1056 { 1057 struct ahd_devinfo devinfo; 1058 struct scb *scb; 1059 struct ahd_tmode_tstate *tstate; 1060 u_int scbid; 1061 1062 /* 1063 * If a target takes us into the command phase 1064 * assume that it has been externally reset and 1065 * has thus lost our previous packetized negotiation 1066 * agreement. Since we have not sent an identify 1067 * message and may not have fully qualified the 1068 * connection, we change our command to TUR, assert 1069 * ATN and ABORT the task when we go to message in 1070 * phase. The OSM will see the REQUEUE_REQUEST 1071 * status and retry the command. 1072 */ 1073 scbid = ahd_get_scbptr(ahd); 1074 scb = ahd_lookup_scb(ahd, scbid); 1075 if (scb == NULL) { 1076 AHD_CORRECTABLE_ERROR(ahd); 1077 printf("Invalid phase with no valid SCB. " 1078 "Resetting bus.\n"); 1079 ahd_reset_channel(ahd, 'A', 1080 /*Initiate Reset*/TRUE); 1081 break; 1082 } 1083 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 1084 SCB_GET_TARGET(ahd, scb), 1085 SCB_GET_LUN(scb), 1086 SCB_GET_CHANNEL(ahd, scb), 1087 ROLE_INITIATOR); 1088 ahd_fetch_transinfo(ahd, 1089 devinfo.channel, 1090 devinfo.our_scsiid, 1091 devinfo.target, 1092 &tstate); 1093 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 1094 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1095 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 1096 /*offset*/0, /*ppr_options*/0, 1097 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1098 ahd_outb(ahd, SCB_CDB_STORE, 0); 1099 ahd_outb(ahd, SCB_CDB_STORE+1, 0); 1100 ahd_outb(ahd, SCB_CDB_STORE+2, 0); 1101 ahd_outb(ahd, SCB_CDB_STORE+3, 0); 1102 ahd_outb(ahd, SCB_CDB_STORE+4, 0); 1103 ahd_outb(ahd, SCB_CDB_STORE+5, 0); 1104 ahd_outb(ahd, SCB_CDB_LEN, 6); 1105 scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE); 1106 scb->hscb->control |= MK_MESSAGE; 1107 ahd_outb(ahd, SCB_CONTROL, scb->hscb->control); 1108 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1109 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 1110 /* 1111 * The lun is 0, regardless of the SCB's lun 1112 * as we have not sent an identify message. 1113 */ 1114 ahd_outb(ahd, SAVED_LUN, 0); 1115 ahd_outb(ahd, SEQ_FLAGS, 0); 1116 ahd_assert_atn(ahd); 1117 scb->flags &= ~SCB_PACKETIZED; 1118 scb->flags |= SCB_ABORT|SCB_CMDPHASE_ABORT; 1119 ahd_freeze_devq(ahd, scb); 1120 aic_set_transaction_status(scb, CAM_REQUEUE_REQ); 1121 aic_freeze_scb(scb); 1122 1123 /* 1124 * Allow the sequencer to continue with 1125 * non-pack processing. 1126 */ 1127 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1128 ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT); 1129 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 1130 ahd_outb(ahd, CLRLQOINT1, 0); 1131 } 1132 #ifdef AHD_DEBUG 1133 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1134 ahd_print_path(ahd, scb); 1135 AHD_CORRECTABLE_ERROR(ahd); 1136 printf("Unexpected command phase from " 1137 "packetized target\n"); 1138 } 1139 #endif 1140 break; 1141 } 1142 } 1143 break; 1144 } 1145 case CFG4OVERRUN: 1146 { 1147 struct scb *scb; 1148 u_int scb_index; 1149 1150 #ifdef AHD_DEBUG 1151 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1152 printf("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd), 1153 ahd_inb(ahd, MODE_PTR)); 1154 } 1155 #endif 1156 scb_index = ahd_get_scbptr(ahd); 1157 scb = ahd_lookup_scb(ahd, scb_index); 1158 if (scb == NULL) { 1159 /* 1160 * Attempt to transfer to an SCB that is 1161 * not outstanding. 1162 */ 1163 ahd_assert_atn(ahd); 1164 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1165 ahd->msgout_buf[0] = MSG_ABORT_TASK; 1166 ahd->msgout_len = 1; 1167 ahd->msgout_index = 0; 1168 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1169 /* 1170 * Clear status received flag to prevent any 1171 * attempt to complete this bogus SCB. 1172 */ 1173 ahd_outb(ahd, SCB_CONTROL, 1174 ahd_inb_scbram(ahd, SCB_CONTROL) 1175 & ~STATUS_RCVD); 1176 } 1177 break; 1178 } 1179 case DUMP_CARD_STATE: 1180 { 1181 ahd_dump_card_state(ahd); 1182 break; 1183 } 1184 case PDATA_REINIT: 1185 { 1186 #ifdef AHD_DEBUG 1187 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1188 printf("%s: PDATA_REINIT - DFCNTRL = 0x%x " 1189 "SG_CACHE_SHADOW = 0x%x\n", 1190 ahd_name(ahd), ahd_inb(ahd, DFCNTRL), 1191 ahd_inb(ahd, SG_CACHE_SHADOW)); 1192 } 1193 #endif 1194 ahd_reinitialize_dataptrs(ahd); 1195 break; 1196 } 1197 case HOST_MSG_LOOP: 1198 { 1199 struct ahd_devinfo devinfo; 1200 1201 /* 1202 * The sequencer has encountered a message phase 1203 * that requires host assistance for completion. 1204 * While handling the message phase(s), we will be 1205 * notified by the sequencer after each byte is 1206 * transferred so we can track bus phase changes. 1207 * 1208 * If this is the first time we've seen a HOST_MSG_LOOP 1209 * interrupt, initialize the state of the host message 1210 * loop. 1211 */ 1212 ahd_fetch_devinfo(ahd, &devinfo); 1213 if (ahd->msg_type == MSG_TYPE_NONE) { 1214 struct scb *scb; 1215 u_int scb_index; 1216 u_int bus_phase; 1217 1218 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1219 if (bus_phase != P_MESGIN 1220 && bus_phase != P_MESGOUT) { 1221 printf("ahd_intr: HOST_MSG_LOOP bad " 1222 "phase 0x%x\n", bus_phase); 1223 AHD_CORRECTABLE_ERROR(ahd); 1224 /* 1225 * Probably transitioned to bus free before 1226 * we got here. Just punt the message. 1227 */ 1228 ahd_dump_card_state(ahd); 1229 ahd_clear_intstat(ahd); 1230 ahd_restart(ahd); 1231 return; 1232 } 1233 1234 scb_index = ahd_get_scbptr(ahd); 1235 scb = ahd_lookup_scb(ahd, scb_index); 1236 if (devinfo.role == ROLE_INITIATOR) { 1237 if (bus_phase == P_MESGOUT) 1238 ahd_setup_initiator_msgout(ahd, 1239 &devinfo, 1240 scb); 1241 else { 1242 ahd->msg_type = 1243 MSG_TYPE_INITIATOR_MSGIN; 1244 ahd->msgin_index = 0; 1245 } 1246 } 1247 #ifdef AHD_TARGET_MODE 1248 else { 1249 if (bus_phase == P_MESGOUT) { 1250 ahd->msg_type = 1251 MSG_TYPE_TARGET_MSGOUT; 1252 ahd->msgin_index = 0; 1253 } 1254 else 1255 ahd_setup_target_msgin(ahd, 1256 &devinfo, 1257 scb); 1258 } 1259 #endif 1260 } 1261 1262 ahd_handle_message_phase(ahd); 1263 break; 1264 } 1265 case NO_MATCH: 1266 { 1267 /* Ensure we don't leave the selection hardware on */ 1268 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 1269 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 1270 1271 printf("%s:%c:%d: no active SCB for reconnecting " 1272 "target - issuing BUS DEVICE RESET\n", 1273 ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4); 1274 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " 1275 "REG0 == 0x%x ACCUM = 0x%x\n", 1276 ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN), 1277 ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM)); 1278 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " 1279 "SINDEX == 0x%x\n", 1280 ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd), 1281 ahd_find_busy_tcl(ahd, 1282 BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID), 1283 ahd_inb(ahd, SAVED_LUN))), 1284 ahd_inw(ahd, SINDEX)); 1285 printf("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " 1286 "SCB_CONTROL == 0x%x\n", 1287 ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID), 1288 ahd_inb_scbram(ahd, SCB_LUN), 1289 ahd_inb_scbram(ahd, SCB_CONTROL)); 1290 printf("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n", 1291 ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI)); 1292 printf("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0)); 1293 printf("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0)); 1294 ahd_dump_card_state(ahd); 1295 ahd->msgout_buf[0] = MSG_BUS_DEV_RESET; 1296 ahd->msgout_len = 1; 1297 ahd->msgout_index = 0; 1298 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1299 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1300 ahd_assert_atn(ahd); 1301 break; 1302 } 1303 case PROTO_VIOLATION: 1304 { 1305 ahd_handle_proto_violation(ahd); 1306 break; 1307 } 1308 case IGN_WIDE_RES: 1309 { 1310 struct ahd_devinfo devinfo; 1311 1312 ahd_fetch_devinfo(ahd, &devinfo); 1313 ahd_handle_ign_wide_residue(ahd, &devinfo); 1314 break; 1315 } 1316 case BAD_PHASE: 1317 { 1318 u_int lastphase; 1319 1320 lastphase = ahd_inb(ahd, LASTPHASE); 1321 printf("%s:%c:%d: unknown scsi bus phase %x, " 1322 "lastphase = 0x%x. Attempting to continue\n", 1323 ahd_name(ahd), 'A', 1324 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1325 lastphase, ahd_inb(ahd, SCSISIGI)); 1326 AHD_CORRECTABLE_ERROR(ahd); 1327 break; 1328 } 1329 case MISSED_BUSFREE: 1330 { 1331 u_int lastphase; 1332 1333 lastphase = ahd_inb(ahd, LASTPHASE); 1334 printf("%s:%c:%d: Missed busfree. " 1335 "Lastphase = 0x%x, Curphase = 0x%x\n", 1336 ahd_name(ahd), 'A', 1337 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1338 lastphase, ahd_inb(ahd, SCSISIGI)); 1339 AHD_CORRECTABLE_ERROR(ahd); 1340 ahd_restart(ahd); 1341 return; 1342 } 1343 case DATA_OVERRUN: 1344 { 1345 /* 1346 * When the sequencer detects an overrun, it 1347 * places the controller in "BITBUCKET" mode 1348 * and allows the target to complete its transfer. 1349 * Unfortunately, none of the counters get updated 1350 * when the controller is in this mode, so we have 1351 * no way of knowing how large the overrun was. 1352 */ 1353 struct scb *scb; 1354 u_int scbindex; 1355 #ifdef AHD_DEBUG 1356 u_int lastphase; 1357 #endif 1358 1359 scbindex = ahd_get_scbptr(ahd); 1360 scb = ahd_lookup_scb(ahd, scbindex); 1361 #ifdef AHD_DEBUG 1362 lastphase = ahd_inb(ahd, LASTPHASE); 1363 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1364 ahd_print_path(ahd, scb); 1365 printf("data overrun detected %s. Tag == 0x%x.\n", 1366 ahd_lookup_phase_entry(lastphase)->phasemsg, 1367 SCB_GET_TAG(scb)); 1368 ahd_print_path(ahd, scb); 1369 printf("%s seen Data Phase. Length = %ld. " 1370 "NumSGs = %d.\n", 1371 ahd_inb(ahd, SEQ_FLAGS) & DPHASE 1372 ? "Have" : "Haven't", 1373 aic_get_transfer_length(scb), scb->sg_count); 1374 ahd_dump_sglist(scb); 1375 } 1376 #endif 1377 1378 /* 1379 * Set this and it will take effect when the 1380 * target does a command complete. 1381 */ 1382 ahd_freeze_devq(ahd, scb); 1383 aic_set_transaction_status(scb, CAM_DATA_RUN_ERR); 1384 aic_freeze_scb(scb); 1385 break; 1386 } 1387 case MKMSG_FAILED: 1388 { 1389 struct ahd_devinfo devinfo; 1390 struct scb *scb; 1391 u_int scbid; 1392 1393 ahd_fetch_devinfo(ahd, &devinfo); 1394 printf("%s:%c:%d:%d: Attempt to issue message failed\n", 1395 ahd_name(ahd), devinfo.channel, devinfo.target, 1396 devinfo.lun); 1397 scbid = ahd_get_scbptr(ahd); 1398 scb = ahd_lookup_scb(ahd, scbid); 1399 AHD_CORRECTABLE_ERROR(ahd); 1400 if (scb != NULL 1401 && (scb->flags & SCB_RECOVERY_SCB) != 0) 1402 /* 1403 * Ensure that we didn't put a second instance of this 1404 * SCB into the QINFIFO. 1405 */ 1406 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1407 SCB_GET_CHANNEL(ahd, scb), 1408 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1409 ROLE_INITIATOR, /*status*/0, 1410 SEARCH_REMOVE); 1411 ahd_outb(ahd, SCB_CONTROL, 1412 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 1413 break; 1414 } 1415 case TASKMGMT_FUNC_COMPLETE: 1416 { 1417 u_int scbid; 1418 struct scb *scb; 1419 1420 scbid = ahd_get_scbptr(ahd); 1421 scb = ahd_lookup_scb(ahd, scbid); 1422 if (scb != NULL) { 1423 u_int lun; 1424 u_int tag; 1425 cam_status error; 1426 1427 ahd_print_path(ahd, scb); 1428 printf("Task Management Func 0x%x Complete\n", 1429 scb->hscb->task_management); 1430 lun = CAM_LUN_WILDCARD; 1431 tag = SCB_LIST_NULL; 1432 1433 switch (scb->hscb->task_management) { 1434 case SIU_TASKMGMT_ABORT_TASK: 1435 tag = SCB_GET_TAG(scb); 1436 case SIU_TASKMGMT_ABORT_TASK_SET: 1437 case SIU_TASKMGMT_CLEAR_TASK_SET: 1438 lun = scb->hscb->lun; 1439 error = CAM_REQ_ABORTED; 1440 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 1441 'A', lun, tag, ROLE_INITIATOR, 1442 error); 1443 break; 1444 case SIU_TASKMGMT_LUN_RESET: 1445 lun = scb->hscb->lun; 1446 case SIU_TASKMGMT_TARGET_RESET: 1447 { 1448 struct ahd_devinfo devinfo; 1449 1450 ahd_scb_devinfo(ahd, &devinfo, scb); 1451 error = CAM_BDR_SENT; 1452 ahd_handle_devreset(ahd, &devinfo, lun, 1453 CAM_BDR_SENT, 1454 lun != CAM_LUN_WILDCARD 1455 ? "Lun Reset" 1456 : "Target Reset", 1457 /*verbose_level*/0); 1458 break; 1459 } 1460 default: 1461 panic("Unexpected TaskMgmt Func\n"); 1462 break; 1463 } 1464 } 1465 break; 1466 } 1467 case TASKMGMT_CMD_CMPLT_OKAY: 1468 { 1469 u_int scbid; 1470 struct scb *scb; 1471 1472 /* 1473 * An ABORT TASK TMF failed to be delivered before 1474 * the targeted command completed normally. 1475 */ 1476 scbid = ahd_get_scbptr(ahd); 1477 scb = ahd_lookup_scb(ahd, scbid); 1478 if (scb != NULL) { 1479 /* 1480 * Remove the second instance of this SCB from 1481 * the QINFIFO if it is still there. 1482 */ 1483 ahd_print_path(ahd, scb); 1484 printf("SCB completes before TMF\n"); 1485 /* 1486 * Handle losing the race. Wait until any 1487 * current selection completes. We will then 1488 * set the TMF back to zero in this SCB so that 1489 * the sequencer doesn't bother to issue another 1490 * sequencer interrupt for its completion. 1491 */ 1492 while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 1493 && (ahd_inb(ahd, SSTAT0) & SELDO) == 0 1494 && (ahd_inb(ahd, SSTAT1) & SELTO) == 0) 1495 ; 1496 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0); 1497 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1498 SCB_GET_CHANNEL(ahd, scb), 1499 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1500 ROLE_INITIATOR, /*status*/0, 1501 SEARCH_REMOVE); 1502 } 1503 break; 1504 } 1505 case TRACEPOINT0: 1506 case TRACEPOINT1: 1507 case TRACEPOINT2: 1508 case TRACEPOINT3: 1509 printf("%s: Tracepoint %d\n", ahd_name(ahd), 1510 seqintcode - TRACEPOINT0); 1511 break; 1512 case NO_SEQINT: 1513 break; 1514 case SAW_HWERR: 1515 ahd_handle_hwerrint(ahd); 1516 break; 1517 default: 1518 printf("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd), 1519 seqintcode); 1520 break; 1521 } 1522 /* 1523 * The sequencer is paused immediately on 1524 * a SEQINT, so we should restart it when 1525 * we're done. 1526 */ 1527 ahd_unpause(ahd); 1528 } 1529 1530 void 1531 ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) 1532 { 1533 struct scb *scb; 1534 u_int status0; 1535 u_int status3; 1536 u_int status; 1537 u_int lqistat1; 1538 u_int lqostat0; 1539 u_int scbid; 1540 u_int busfreetime; 1541 1542 ahd_update_modes(ahd); 1543 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1544 1545 status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR); 1546 status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO); 1547 status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR); 1548 lqistat1 = ahd_inb(ahd, LQISTAT1); 1549 lqostat0 = ahd_inb(ahd, LQOSTAT0); 1550 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1551 if ((status0 & (SELDI|SELDO)) != 0) { 1552 u_int simode0; 1553 1554 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1555 simode0 = ahd_inb(ahd, SIMODE0); 1556 status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO); 1557 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1558 } 1559 scbid = ahd_get_scbptr(ahd); 1560 scb = ahd_lookup_scb(ahd, scbid); 1561 if (scb != NULL 1562 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 1563 scb = NULL; 1564 1565 if ((status0 & IOERR) != 0) { 1566 u_int now_lvd; 1567 1568 now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40; 1569 printf("%s: Transceiver State Has Changed to %s mode\n", 1570 ahd_name(ahd), now_lvd ? "LVD" : "SE"); 1571 ahd_outb(ahd, CLRSINT0, CLRIOERR); 1572 /* 1573 * A change in I/O mode is equivalent to a bus reset. 1574 */ 1575 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1576 ahd_pause(ahd); 1577 ahd_setup_iocell_workaround(ahd); 1578 ahd_unpause(ahd); 1579 } else if ((status0 & OVERRUN) != 0) { 1580 printf("%s: SCSI offset overrun detected. Resetting bus.\n", 1581 ahd_name(ahd)); 1582 AHD_CORRECTABLE_ERROR(ahd); 1583 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1584 } else if ((status & SCSIRSTI) != 0) { 1585 printf("%s: Someone reset channel A\n", ahd_name(ahd)); 1586 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE); 1587 AHD_UNCORRECTABLE_ERROR(ahd); 1588 } else if ((status & SCSIPERR) != 0) { 1589 /* Make sure the sequencer is in a safe location. */ 1590 ahd_clear_critical_section(ahd); 1591 1592 ahd_handle_transmission_error(ahd); 1593 } else if (lqostat0 != 0) { 1594 printf("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0); 1595 ahd_outb(ahd, CLRLQOINT0, lqostat0); 1596 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 1597 ahd_outb(ahd, CLRLQOINT1, 0); 1598 } else if ((status & SELTO) != 0) { 1599 u_int scbid; 1600 1601 /* Stop the selection */ 1602 ahd_outb(ahd, SCSISEQ0, 0); 1603 1604 /* Make sure the sequencer is in a safe location. */ 1605 ahd_clear_critical_section(ahd); 1606 1607 /* No more pending messages */ 1608 ahd_clear_msg_state(ahd); 1609 1610 /* Clear interrupt state */ 1611 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR); 1612 1613 /* 1614 * Although the driver does not care about the 1615 * 'Selection in Progress' status bit, the busy 1616 * LED does. SELINGO is only cleared by a successful 1617 * selection, so we must manually clear it to insure 1618 * the LED turns off just incase no future successful 1619 * selections occur (e.g. no devices on the bus). 1620 */ 1621 ahd_outb(ahd, CLRSINT0, CLRSELINGO); 1622 1623 scbid = ahd_inw(ahd, WAITING_TID_HEAD); 1624 scb = ahd_lookup_scb(ahd, scbid); 1625 if (scb == NULL) { 1626 printf("%s: ahd_intr - referenced scb not " 1627 "valid during SELTO scb(0x%x)\n", 1628 ahd_name(ahd), scbid); 1629 ahd_dump_card_state(ahd); 1630 AHD_UNCORRECTABLE_ERROR(ahd); 1631 } else { 1632 struct ahd_devinfo devinfo; 1633 #ifdef AHD_DEBUG 1634 if ((ahd_debug & AHD_SHOW_SELTO) != 0) { 1635 ahd_print_path(ahd, scb); 1636 printf("Saw Selection Timeout for SCB 0x%x\n", 1637 scbid); 1638 } 1639 #endif 1640 ahd_scb_devinfo(ahd, &devinfo, scb); 1641 aic_set_transaction_status(scb, CAM_SEL_TIMEOUT); 1642 ahd_freeze_devq(ahd, scb); 1643 1644 /* 1645 * Cancel any pending transactions on the device 1646 * now that it seems to be missing. This will 1647 * also revert us to async/narrow transfers until 1648 * we can renegotiate with the device. 1649 */ 1650 ahd_handle_devreset(ahd, &devinfo, 1651 CAM_LUN_WILDCARD, 1652 CAM_SEL_TIMEOUT, 1653 "Selection Timeout", 1654 /*verbose_level*/1); 1655 } 1656 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1657 ahd_iocell_first_selection(ahd); 1658 ahd_unpause(ahd); 1659 } else if ((status0 & (SELDI|SELDO)) != 0) { 1660 ahd_iocell_first_selection(ahd); 1661 ahd_unpause(ahd); 1662 } else if (status3 != 0) { 1663 printf("%s: SCSI Cell parity error SSTAT3 == 0x%x\n", 1664 ahd_name(ahd), status3); 1665 AHD_CORRECTABLE_ERROR(ahd); 1666 ahd_outb(ahd, CLRSINT3, status3); 1667 } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) { 1668 /* Make sure the sequencer is in a safe location. */ 1669 ahd_clear_critical_section(ahd); 1670 1671 ahd_handle_lqiphase_error(ahd, lqistat1); 1672 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1673 /* 1674 * This status can be delayed during some 1675 * streaming operations. The SCSIPHASE 1676 * handler has already dealt with this case 1677 * so just clear the error. 1678 */ 1679 ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ); 1680 } else if ((status & BUSFREE) != 0 1681 || (lqistat1 & LQOBUSFREE) != 0) { 1682 u_int lqostat1; 1683 int restart; 1684 int clear_fifo; 1685 int packetized; 1686 u_int mode; 1687 1688 /* 1689 * Clear our selection hardware as soon as possible. 1690 * We may have an entry in the waiting Q for this target, 1691 * that is affected by this busfree and we don't want to 1692 * go about selecting the target while we handle the event. 1693 */ 1694 ahd_outb(ahd, SCSISEQ0, 0); 1695 1696 /* Make sure the sequencer is in a safe location. */ 1697 ahd_clear_critical_section(ahd); 1698 1699 /* 1700 * Determine what we were up to at the time of 1701 * the busfree. 1702 */ 1703 mode = AHD_MODE_SCSI; 1704 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1705 lqostat1 = ahd_inb(ahd, LQOSTAT1); 1706 switch (busfreetime) { 1707 case BUSFREE_DFF0: 1708 case BUSFREE_DFF1: 1709 { 1710 u_int scbid; 1711 struct scb *scb; 1712 1713 mode = busfreetime == BUSFREE_DFF0 1714 ? AHD_MODE_DFF0 : AHD_MODE_DFF1; 1715 ahd_set_modes(ahd, mode, mode); 1716 scbid = ahd_get_scbptr(ahd); 1717 scb = ahd_lookup_scb(ahd, scbid); 1718 if (scb == NULL) { 1719 printf("%s: Invalid SCB %d in DFF%d " 1720 "during unexpected busfree\n", 1721 ahd_name(ahd), scbid, mode); 1722 packetized = 0; 1723 AHD_CORRECTABLE_ERROR(ahd); 1724 } else 1725 packetized = (scb->flags & SCB_PACKETIZED) != 0; 1726 clear_fifo = 1; 1727 break; 1728 } 1729 case BUSFREE_LQO: 1730 clear_fifo = 0; 1731 packetized = 1; 1732 break; 1733 default: 1734 clear_fifo = 0; 1735 packetized = (lqostat1 & LQOBUSFREE) != 0; 1736 if (!packetized 1737 && ahd_inb(ahd, LASTPHASE) == P_BUSFREE 1738 && (ahd_inb(ahd, SSTAT0) & SELDI) == 0 1739 && ((ahd_inb(ahd, SSTAT0) & SELDO) == 0 1740 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) == 0)) 1741 /* 1742 * Assume packetized if we are not 1743 * on the bus in a non-packetized 1744 * capacity and any pending selection 1745 * was a packetized selection. 1746 */ 1747 packetized = 1; 1748 break; 1749 } 1750 1751 #ifdef AHD_DEBUG 1752 if ((ahd_debug & AHD_SHOW_MISC) != 0) 1753 printf("Saw Busfree. Busfreetime = 0x%x.\n", 1754 busfreetime); 1755 #endif 1756 /* 1757 * Busfrees that occur in non-packetized phases are 1758 * handled by the nonpkt_busfree handler. 1759 */ 1760 if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) { 1761 restart = ahd_handle_pkt_busfree(ahd, busfreetime); 1762 } else { 1763 packetized = 0; 1764 restart = ahd_handle_nonpkt_busfree(ahd); 1765 } 1766 /* 1767 * Clear the busfree interrupt status. The setting of 1768 * the interrupt is a pulse, so in a perfect world, we 1769 * would not need to muck with the ENBUSFREE logic. This 1770 * would ensure that if the bus moves on to another 1771 * connection, busfree protection is still in force. If 1772 * BUSFREEREV is broken, however, we must manually clear 1773 * the ENBUSFREE if the busfree occurred during a non-pack 1774 * connection so that we don't get false positives during 1775 * future, packetized, connections. 1776 */ 1777 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 1778 if (packetized == 0 1779 && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0) 1780 ahd_outb(ahd, SIMODE1, 1781 ahd_inb(ahd, SIMODE1) & ~ENBUSFREE); 1782 1783 if (clear_fifo) 1784 ahd_clear_fifo(ahd, mode); 1785 1786 ahd_clear_msg_state(ahd); 1787 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1788 if (restart) { 1789 ahd_restart(ahd); 1790 } else { 1791 ahd_unpause(ahd); 1792 } 1793 } else { 1794 printf("%s: Missing case in ahd_handle_scsiint. status = %x\n", 1795 ahd_name(ahd), status); 1796 ahd_dump_card_state(ahd); 1797 ahd_clear_intstat(ahd); 1798 ahd_unpause(ahd); 1799 } 1800 } 1801 1802 static void 1803 ahd_handle_transmission_error(struct ahd_softc *ahd) 1804 { 1805 struct scb *scb; 1806 u_int scbid; 1807 u_int lqistat1; 1808 u_int msg_out; 1809 u_int curphase; 1810 u_int lastphase; 1811 u_int perrdiag; 1812 u_int cur_col; 1813 int silent; 1814 1815 scb = NULL; 1816 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1817 lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ); 1818 ahd_inb(ahd, LQISTAT2); 1819 if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0 1820 && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) { 1821 u_int lqistate; 1822 1823 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1824 lqistate = ahd_inb(ahd, LQISTATE); 1825 if ((lqistate >= 0x1E && lqistate <= 0x24) 1826 || (lqistate == 0x29)) { 1827 #ifdef AHD_DEBUG 1828 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1829 printf("%s: NLQCRC found via LQISTATE\n", 1830 ahd_name(ahd)); 1831 } 1832 #endif 1833 lqistat1 |= LQICRCI_NLQ; 1834 } 1835 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1836 } 1837 1838 ahd_outb(ahd, CLRLQIINT1, lqistat1); 1839 lastphase = ahd_inb(ahd, LASTPHASE); 1840 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1841 perrdiag = ahd_inb(ahd, PERRDIAG); 1842 msg_out = MSG_INITIATOR_DET_ERR; 1843 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR); 1844 1845 /* 1846 * Try to find the SCB associated with this error. 1847 */ 1848 silent = FALSE; 1849 if (lqistat1 == 0 1850 || (lqistat1 & LQICRCI_NLQ) != 0) { 1851 if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0) 1852 ahd_set_active_fifo(ahd); 1853 scbid = ahd_get_scbptr(ahd); 1854 scb = ahd_lookup_scb(ahd, scbid); 1855 if (scb != NULL && SCB_IS_SILENT(scb)) 1856 silent = TRUE; 1857 } 1858 1859 cur_col = 0; 1860 if (silent == FALSE) { 1861 printf("%s: Transmission error detected\n", ahd_name(ahd)); 1862 ahd_lqistat1_print(lqistat1, &cur_col, 50); 1863 ahd_lastphase_print(lastphase, &cur_col, 50); 1864 ahd_scsisigi_print(curphase, &cur_col, 50); 1865 ahd_perrdiag_print(perrdiag, &cur_col, 50); 1866 printf("\n"); 1867 AHD_CORRECTABLE_ERROR(ahd); 1868 ahd_dump_card_state(ahd); 1869 } 1870 1871 if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) { 1872 if (silent == FALSE) { 1873 printf("%s: Gross protocol error during incoming " 1874 "packet. lqistat1 == 0x%x. Resetting bus.\n", 1875 ahd_name(ahd), lqistat1); 1876 AHD_UNCORRECTABLE_ERROR(ahd); 1877 } 1878 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1879 return; 1880 } else if ((lqistat1 & LQICRCI_LQ) != 0) { 1881 /* 1882 * A CRC error has been detected on an incoming LQ. 1883 * The bus is currently hung on the last ACK. 1884 * Hit LQIRETRY to release the last ack, and 1885 * wait for the sequencer to determine that ATNO 1886 * is asserted while in message out to take us 1887 * to our host message loop. No NONPACKREQ or 1888 * LQIPHASE type errors will occur in this 1889 * scenario. After this first LQIRETRY, the LQI 1890 * manager will be in ISELO where it will 1891 * happily sit until another packet phase begins. 1892 * Unexpected bus free detection is enabled 1893 * through any phases that occur after we release 1894 * this last ack until the LQI manager sees a 1895 * packet phase. This implies we may have to 1896 * ignore a perfectly valid "unexected busfree" 1897 * after our "initiator detected error" message is 1898 * sent. A busfree is the expected response after 1899 * we tell the target that it's L_Q was corrupted. 1900 * (SPI4R09 10.7.3.3.3) 1901 */ 1902 ahd_outb(ahd, LQCTL2, LQIRETRY); 1903 printf("LQIRetry for LQICRCI_LQ to release ACK\n"); 1904 AHD_CORRECTABLE_ERROR(ahd); 1905 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1906 /* 1907 * We detected a CRC error in a NON-LQ packet. 1908 * The hardware has varying behavior in this situation 1909 * depending on whether this packet was part of a 1910 * stream or not. 1911 * 1912 * PKT by PKT mode: 1913 * The hardware has already acked the complete packet. 1914 * If the target honors our outstanding ATN condition, 1915 * we should be (or soon will be) in MSGOUT phase. 1916 * This will trigger the LQIPHASE_LQ status bit as the 1917 * hardware was expecting another LQ. Unexpected 1918 * busfree detection is enabled. Once LQIPHASE_LQ is 1919 * true (first entry into host message loop is much 1920 * the same), we must clear LQIPHASE_LQ and hit 1921 * LQIRETRY so the hardware is ready to handle 1922 * a future LQ. NONPACKREQ will not be asserted again 1923 * once we hit LQIRETRY until another packet is 1924 * processed. The target may either go busfree 1925 * or start another packet in response to our message. 1926 * 1927 * Read Streaming P0 asserted: 1928 * If we raise ATN and the target completes the entire 1929 * stream (P0 asserted during the last packet), the 1930 * hardware will ack all data and return to the ISTART 1931 * state. When the target reponds to our ATN condition, 1932 * LQIPHASE_LQ will be asserted. We should respond to 1933 * this with an LQIRETRY to prepare for any future 1934 * packets. NONPACKREQ will not be asserted again 1935 * once we hit LQIRETRY until another packet is 1936 * processed. The target may either go busfree or 1937 * start another packet in response to our message. 1938 * Busfree detection is enabled. 1939 * 1940 * Read Streaming P0 not asserted: 1941 * If we raise ATN and the target transitions to 1942 * MSGOUT in or after a packet where P0 is not 1943 * asserted, the hardware will assert LQIPHASE_NLQ. 1944 * We should respond to the LQIPHASE_NLQ with an 1945 * LQIRETRY. Should the target stay in a non-pkt 1946 * phase after we send our message, the hardware 1947 * will assert LQIPHASE_LQ. Recovery is then just as 1948 * listed above for the read streaming with P0 asserted. 1949 * Busfree detection is enabled. 1950 */ 1951 if (silent == FALSE) 1952 printf("LQICRC_NLQ\n"); 1953 if (scb == NULL) { 1954 printf("%s: No SCB valid for LQICRC_NLQ. " 1955 "Resetting bus\n", ahd_name(ahd)); 1956 AHD_UNCORRECTABLE_ERROR(ahd); 1957 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1958 return; 1959 } 1960 } else if ((lqistat1 & LQIBADLQI) != 0) { 1961 printf("Need to handle BADLQI!\n"); 1962 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1963 return; 1964 } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) { 1965 if ((curphase & ~P_DATAIN_DT) != 0) { 1966 /* Ack the byte. So we can continue. */ 1967 if (silent == FALSE) 1968 printf("Acking %s to clear perror\n", 1969 ahd_lookup_phase_entry(curphase)->phasemsg); 1970 ahd_inb(ahd, SCSIDAT); 1971 } 1972 1973 if (curphase == P_MESGIN) 1974 msg_out = MSG_PARITY_ERROR; 1975 } 1976 1977 /* 1978 * We've set the hardware to assert ATN if we 1979 * get a parity error on "in" phases, so all we 1980 * need to do is stuff the message buffer with 1981 * the appropriate message. "In" phases have set 1982 * mesg_out to something other than MSG_NOP. 1983 */ 1984 ahd->send_msg_perror = msg_out; 1985 if (scb != NULL && msg_out == MSG_INITIATOR_DET_ERR) 1986 scb->flags |= SCB_TRANSMISSION_ERROR; 1987 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1988 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1989 ahd_unpause(ahd); 1990 } 1991 1992 static void 1993 ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1) 1994 { 1995 /* 1996 * Clear the sources of the interrupts. 1997 */ 1998 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1999 ahd_outb(ahd, CLRLQIINT1, lqistat1); 2000 2001 /* 2002 * If the "illegal" phase changes were in response 2003 * to our ATN to flag a CRC error, AND we ended up 2004 * on packet boundaries, clear the error, restart the 2005 * LQI manager as appropriate, and go on our merry 2006 * way toward sending the message. Otherwise, reset 2007 * the bus to clear the error. 2008 */ 2009 ahd_set_active_fifo(ahd); 2010 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0 2011 && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) { 2012 if ((lqistat1 & LQIPHASE_LQ) != 0) { 2013 printf("LQIRETRY for LQIPHASE_LQ\n"); 2014 AHD_CORRECTABLE_ERROR(ahd); 2015 ahd_outb(ahd, LQCTL2, LQIRETRY); 2016 } else if ((lqistat1 & LQIPHASE_NLQ) != 0) { 2017 printf("LQIRETRY for LQIPHASE_NLQ\n"); 2018 AHD_CORRECTABLE_ERROR(ahd); 2019 ahd_outb(ahd, LQCTL2, LQIRETRY); 2020 } else 2021 panic("ahd_handle_lqiphase_error: No phase errors\n"); 2022 ahd_dump_card_state(ahd); 2023 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2024 ahd_unpause(ahd); 2025 } else { 2026 printf("Reseting Channel for LQI Phase error\n"); 2027 AHD_CORRECTABLE_ERROR(ahd); 2028 ahd_dump_card_state(ahd); 2029 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 2030 } 2031 } 2032 2033 /* 2034 * Packetized unexpected or expected busfree. 2035 * Entered in mode based on busfreetime. 2036 */ 2037 static int 2038 ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime) 2039 { 2040 u_int lqostat1; 2041 2042 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 2043 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 2044 lqostat1 = ahd_inb(ahd, LQOSTAT1); 2045 if ((lqostat1 & LQOBUSFREE) != 0) { 2046 struct scb *scb; 2047 u_int scbid; 2048 u_int saved_scbptr; 2049 u_int waiting_h; 2050 u_int waiting_t; 2051 u_int next; 2052 2053 /* 2054 * The LQO manager detected an unexpected busfree 2055 * either: 2056 * 2057 * 1) During an outgoing LQ. 2058 * 2) After an outgoing LQ but before the first 2059 * REQ of the command packet. 2060 * 3) During an outgoing command packet. 2061 * 2062 * In all cases, CURRSCB is pointing to the 2063 * SCB that encountered the failure. Clean 2064 * up the queue, clear SELDO and LQOBUSFREE, 2065 * and allow the sequencer to restart the select 2066 * out at its lesure. 2067 */ 2068 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2069 scbid = ahd_inw(ahd, CURRSCB); 2070 scb = ahd_lookup_scb(ahd, scbid); 2071 if (scb == NULL) 2072 panic("SCB not valid during LQOBUSFREE"); 2073 /* 2074 * Clear the status. 2075 */ 2076 ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE); 2077 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 2078 ahd_outb(ahd, CLRLQOINT1, 0); 2079 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2080 ahd_flush_device_writes(ahd); 2081 ahd_outb(ahd, CLRSINT0, CLRSELDO); 2082 2083 /* 2084 * Return the LQO manager to its idle loop. It will 2085 * not do this automatically if the busfree occurs 2086 * after the first REQ of either the LQ or command 2087 * packet or between the LQ and command packet. 2088 */ 2089 ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE); 2090 2091 /* 2092 * Update the waiting for selection queue so 2093 * we restart on the correct SCB. 2094 */ 2095 waiting_h = ahd_inw(ahd, WAITING_TID_HEAD); 2096 saved_scbptr = ahd_get_scbptr(ahd); 2097 if (waiting_h != scbid) { 2098 ahd_outw(ahd, WAITING_TID_HEAD, scbid); 2099 waiting_t = ahd_inw(ahd, WAITING_TID_TAIL); 2100 if (waiting_t == waiting_h) { 2101 ahd_outw(ahd, WAITING_TID_TAIL, scbid); 2102 next = SCB_LIST_NULL; 2103 } else { 2104 ahd_set_scbptr(ahd, waiting_h); 2105 next = ahd_inw_scbram(ahd, SCB_NEXT2); 2106 } 2107 ahd_set_scbptr(ahd, scbid); 2108 ahd_outw(ahd, SCB_NEXT2, next); 2109 } 2110 ahd_set_scbptr(ahd, saved_scbptr); 2111 if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) { 2112 if (SCB_IS_SILENT(scb) == FALSE) { 2113 ahd_print_path(ahd, scb); 2114 printf("Probable outgoing LQ CRC error. " 2115 "Retrying command\n"); 2116 AHD_CORRECTABLE_ERROR(ahd); 2117 } 2118 scb->crc_retry_count++; 2119 } else { 2120 aic_set_transaction_status(scb, CAM_UNCOR_PARITY); 2121 aic_freeze_scb(scb); 2122 ahd_freeze_devq(ahd, scb); 2123 } 2124 /* Return unpausing the sequencer. */ 2125 return (0); 2126 } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) { 2127 /* 2128 * Ignore what are really parity errors that 2129 * occur on the last REQ of a free running 2130 * clock prior to going busfree. Some drives 2131 * do not properly active negate just before 2132 * going busfree resulting in a parity glitch. 2133 */ 2134 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE); 2135 #ifdef AHD_DEBUG 2136 if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0) 2137 printf("%s: Parity on last REQ detected " 2138 "during busfree phase.\n", 2139 ahd_name(ahd)); 2140 #endif 2141 /* Return unpausing the sequencer. */ 2142 return (0); 2143 } 2144 if (ahd->src_mode != AHD_MODE_SCSI) { 2145 u_int scbid; 2146 struct scb *scb; 2147 2148 scbid = ahd_get_scbptr(ahd); 2149 scb = ahd_lookup_scb(ahd, scbid); 2150 ahd_print_path(ahd, scb); 2151 printf("Unexpected PKT busfree condition\n"); 2152 AHD_UNCORRECTABLE_ERROR(ahd); 2153 ahd_dump_card_state(ahd); 2154 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A', 2155 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 2156 ROLE_INITIATOR, CAM_UNEXP_BUSFREE); 2157 2158 /* Return restarting the sequencer. */ 2159 return (1); 2160 } 2161 printf("%s: Unexpected PKT busfree condition\n", ahd_name(ahd)); 2162 AHD_UNCORRECTABLE_ERROR(ahd); 2163 ahd_dump_card_state(ahd); 2164 /* Restart the sequencer. */ 2165 return (1); 2166 } 2167 2168 /* 2169 * Non-packetized unexpected or expected busfree. 2170 */ 2171 static int 2172 ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) 2173 { 2174 struct ahd_devinfo devinfo; 2175 struct scb *scb; 2176 u_int lastphase; 2177 u_int saved_scsiid; 2178 u_int saved_lun; 2179 u_int target; 2180 u_int initiator_role_id; 2181 u_int scbid; 2182 u_int ppr_busfree; 2183 int printerror; 2184 2185 /* 2186 * Look at what phase we were last in. If its message out, 2187 * chances are pretty good that the busfree was in response 2188 * to one of our abort requests. 2189 */ 2190 lastphase = ahd_inb(ahd, LASTPHASE); 2191 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 2192 saved_lun = ahd_inb(ahd, SAVED_LUN); 2193 target = SCSIID_TARGET(ahd, saved_scsiid); 2194 initiator_role_id = SCSIID_OUR_ID(saved_scsiid); 2195 ahd_compile_devinfo(&devinfo, initiator_role_id, 2196 target, saved_lun, 'A', ROLE_INITIATOR); 2197 printerror = 1; 2198 2199 scbid = ahd_get_scbptr(ahd); 2200 scb = ahd_lookup_scb(ahd, scbid); 2201 if (scb != NULL 2202 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 2203 scb = NULL; 2204 2205 ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0; 2206 if (lastphase == P_MESGOUT) { 2207 u_int tag; 2208 2209 tag = SCB_LIST_NULL; 2210 if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT_TAG, TRUE) 2211 || ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT, TRUE)) { 2212 int found; 2213 int sent_msg; 2214 2215 if (scb == NULL) { 2216 ahd_print_devinfo(ahd, &devinfo); 2217 printf("Abort for unidentified " 2218 "connection completed.\n"); 2219 /* restart the sequencer. */ 2220 return (1); 2221 } 2222 sent_msg = ahd->msgout_buf[ahd->msgout_index - 1]; 2223 ahd_print_path(ahd, scb); 2224 printf("SCB %d - Abort%s Completed.\n", 2225 SCB_GET_TAG(scb), 2226 sent_msg == MSG_ABORT_TAG ? "" : " Tag"); 2227 2228 if (sent_msg == MSG_ABORT_TAG) 2229 tag = SCB_GET_TAG(scb); 2230 2231 if ((scb->flags & SCB_CMDPHASE_ABORT) != 0) { 2232 /* 2233 * This abort is in response to an 2234 * unexpected switch to command phase 2235 * for a packetized connection. Since 2236 * the identify message was never sent, 2237 * "saved lun" is 0. We really want to 2238 * abort only the SCB that encountered 2239 * this error, which could have a different 2240 * lun. The SCB will be retried so the OS 2241 * will see the UA after renegotiating to 2242 * packetized. 2243 */ 2244 tag = SCB_GET_TAG(scb); 2245 saved_lun = scb->hscb->lun; 2246 } 2247 found = ahd_abort_scbs(ahd, target, 'A', saved_lun, 2248 tag, ROLE_INITIATOR, 2249 CAM_REQ_ABORTED); 2250 printf("found == 0x%x\n", found); 2251 printerror = 0; 2252 } else if (ahd_sent_msg(ahd, AHDMSG_1B, 2253 MSG_BUS_DEV_RESET, TRUE)) { 2254 #ifdef __FreeBSD__ 2255 /* 2256 * Don't mark the user's request for this BDR 2257 * as completing with CAM_BDR_SENT. CAM3 2258 * specifies CAM_REQ_CMP. 2259 */ 2260 if (scb != NULL 2261 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV 2262 && ahd_match_scb(ahd, scb, target, 'A', 2263 CAM_LUN_WILDCARD, SCB_LIST_NULL, 2264 ROLE_INITIATOR)) 2265 aic_set_transaction_status(scb, CAM_REQ_CMP); 2266 #endif 2267 ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD, 2268 CAM_BDR_SENT, "Bus Device Reset", 2269 /*verbose_level*/0); 2270 printerror = 0; 2271 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, FALSE) 2272 && ppr_busfree == 0) { 2273 struct ahd_initiator_tinfo *tinfo; 2274 struct ahd_tmode_tstate *tstate; 2275 2276 /* 2277 * PPR Rejected. 2278 * 2279 * If the previous negotiation was packetized, 2280 * this could be because the device has been 2281 * reset without our knowledge. Force our 2282 * current negotiation to async and retry the 2283 * negotiation. Otherwise retry the command 2284 * with non-ppr negotiation. 2285 */ 2286 #ifdef AHD_DEBUG 2287 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2288 printf("PPR negotiation rejected busfree.\n"); 2289 #endif 2290 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel, 2291 devinfo.our_scsiid, 2292 devinfo.target, &tstate); 2293 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)!=0) { 2294 ahd_set_width(ahd, &devinfo, 2295 MSG_EXT_WDTR_BUS_8_BIT, 2296 AHD_TRANS_CUR, 2297 /*paused*/TRUE); 2298 ahd_set_syncrate(ahd, &devinfo, 2299 /*period*/0, /*offset*/0, 2300 /*ppr_options*/0, 2301 AHD_TRANS_CUR, 2302 /*paused*/TRUE); 2303 /* 2304 * The expect PPR busfree handler below 2305 * will effect the retry and necessary 2306 * abort. 2307 */ 2308 } else { 2309 tinfo->curr.transport_version = 2; 2310 tinfo->goal.transport_version = 2; 2311 tinfo->goal.ppr_options = 0; 2312 /* 2313 * Remove any SCBs in the waiting for selection 2314 * queue that may also be for this target so 2315 * that command ordering is preserved. 2316 */ 2317 ahd_freeze_devq(ahd, scb); 2318 ahd_qinfifo_requeue_tail(ahd, scb); 2319 printerror = 0; 2320 } 2321 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE) 2322 && ppr_busfree == 0) { 2323 /* 2324 * Negotiation Rejected. Go-narrow and 2325 * retry command. 2326 */ 2327 #ifdef AHD_DEBUG 2328 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2329 printf("WDTR negotiation rejected busfree.\n"); 2330 #endif 2331 ahd_set_width(ahd, &devinfo, 2332 MSG_EXT_WDTR_BUS_8_BIT, 2333 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2334 /*paused*/TRUE); 2335 /* 2336 * Remove any SCBs in the waiting for selection 2337 * queue that may also be for this target so that 2338 * command ordering is preserved. 2339 */ 2340 ahd_freeze_devq(ahd, scb); 2341 ahd_qinfifo_requeue_tail(ahd, scb); 2342 printerror = 0; 2343 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE) 2344 && ppr_busfree == 0) { 2345 /* 2346 * Negotiation Rejected. Go-async and 2347 * retry command. 2348 */ 2349 #ifdef AHD_DEBUG 2350 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2351 printf("SDTR negotiation rejected busfree.\n"); 2352 #endif 2353 ahd_set_syncrate(ahd, &devinfo, 2354 /*period*/0, /*offset*/0, 2355 /*ppr_options*/0, 2356 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2357 /*paused*/TRUE); 2358 /* 2359 * Remove any SCBs in the waiting for selection 2360 * queue that may also be for this target so that 2361 * command ordering is preserved. 2362 */ 2363 ahd_freeze_devq(ahd, scb); 2364 ahd_qinfifo_requeue_tail(ahd, scb); 2365 printerror = 0; 2366 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0 2367 && ahd_sent_msg(ahd, AHDMSG_1B, 2368 MSG_INITIATOR_DET_ERR, TRUE)) { 2369 #ifdef AHD_DEBUG 2370 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2371 printf("Expected IDE Busfree\n"); 2372 #endif 2373 printerror = 0; 2374 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE) 2375 && ahd_sent_msg(ahd, AHDMSG_1B, 2376 MSG_MESSAGE_REJECT, TRUE)) { 2377 #ifdef AHD_DEBUG 2378 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2379 printf("Expected QAS Reject Busfree\n"); 2380 #endif 2381 printerror = 0; 2382 } 2383 } 2384 2385 /* 2386 * The busfree required flag is honored at the end of 2387 * the message phases. We check it last in case we 2388 * had to send some other message that caused a busfree. 2389 */ 2390 if (printerror != 0 2391 && (lastphase == P_MESGIN || lastphase == P_MESGOUT) 2392 && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) { 2393 ahd_freeze_devq(ahd, scb); 2394 aic_set_transaction_status(scb, CAM_REQUEUE_REQ); 2395 aic_freeze_scb(scb); 2396 if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) { 2397 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 2398 SCB_GET_CHANNEL(ahd, scb), 2399 SCB_GET_LUN(scb), SCB_LIST_NULL, 2400 ROLE_INITIATOR, CAM_REQ_ABORTED); 2401 } else { 2402 #ifdef AHD_DEBUG 2403 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2404 printf("PPR Negotiation Busfree.\n"); 2405 #endif 2406 ahd_done(ahd, scb); 2407 } 2408 printerror = 0; 2409 } 2410 if (printerror != 0) { 2411 int aborted; 2412 2413 aborted = 0; 2414 if (scb != NULL) { 2415 u_int tag; 2416 2417 if ((scb->hscb->control & TAG_ENB) != 0) 2418 tag = SCB_GET_TAG(scb); 2419 else 2420 tag = SCB_LIST_NULL; 2421 ahd_print_path(ahd, scb); 2422 aborted = ahd_abort_scbs(ahd, target, 'A', 2423 SCB_GET_LUN(scb), tag, 2424 ROLE_INITIATOR, 2425 CAM_UNEXP_BUSFREE); 2426 } else { 2427 /* 2428 * We had not fully identified this connection, 2429 * so we cannot abort anything. 2430 */ 2431 printf("%s: ", ahd_name(ahd)); 2432 } 2433 printf("Unexpected busfree %s, %d SCBs aborted, " 2434 "PRGMCNT == 0x%x\n", 2435 ahd_lookup_phase_entry(lastphase)->phasemsg, 2436 aborted, 2437 ahd_inw(ahd, PRGMCNT)); 2438 AHD_UNCORRECTABLE_ERROR(ahd); 2439 ahd_dump_card_state(ahd); 2440 if (lastphase != P_BUSFREE) 2441 ahd_force_renegotiation(ahd, &devinfo); 2442 } 2443 /* Always restart the sequencer. */ 2444 return (1); 2445 } 2446 2447 static void 2448 ahd_handle_proto_violation(struct ahd_softc *ahd) 2449 { 2450 struct ahd_devinfo devinfo; 2451 struct scb *scb; 2452 u_int scbid; 2453 u_int seq_flags; 2454 u_int curphase; 2455 u_int lastphase; 2456 int found; 2457 2458 ahd_fetch_devinfo(ahd, &devinfo); 2459 scbid = ahd_get_scbptr(ahd); 2460 scb = ahd_lookup_scb(ahd, scbid); 2461 seq_flags = ahd_inb(ahd, SEQ_FLAGS); 2462 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 2463 lastphase = ahd_inb(ahd, LASTPHASE); 2464 if ((seq_flags & NOT_IDENTIFIED) != 0) { 2465 /* 2466 * The reconnecting target either did not send an 2467 * identify message, or did, but we didn't find an SCB 2468 * to match. 2469 */ 2470 ahd_print_devinfo(ahd, &devinfo); 2471 printf("Target did not send an IDENTIFY message. " 2472 "LASTPHASE = 0x%x.\n", lastphase); 2473 AHD_UNCORRECTABLE_ERROR(ahd); 2474 scb = NULL; 2475 } else if (scb == NULL) { 2476 /* 2477 * We don't seem to have an SCB active for this 2478 * transaction. Print an error and reset the bus. 2479 */ 2480 ahd_print_devinfo(ahd, &devinfo); 2481 printf("No SCB found during protocol violation\n"); 2482 AHD_UNCORRECTABLE_ERROR(ahd); 2483 goto proto_violation_reset; 2484 } else { 2485 aic_set_transaction_status(scb, CAM_SEQUENCE_FAIL); 2486 if ((seq_flags & NO_CDB_SENT) != 0) { 2487 ahd_print_path(ahd, scb); 2488 printf("No or incomplete CDB sent to device.\n"); 2489 AHD_UNCORRECTABLE_ERROR(ahd); 2490 } else if ((ahd_inb_scbram(ahd, SCB_CONTROL) 2491 & STATUS_RCVD) == 0) { 2492 /* 2493 * The target never bothered to provide status to 2494 * us prior to completing the command. Since we don't 2495 * know the disposition of this command, we must attempt 2496 * to abort it. Assert ATN and prepare to send an abort 2497 * message. 2498 */ 2499 ahd_print_path(ahd, scb); 2500 printf("Completed command without status.\n"); 2501 } else { 2502 ahd_print_path(ahd, scb); 2503 printf("Unknown protocol violation.\n"); 2504 AHD_UNCORRECTABLE_ERROR(ahd); 2505 ahd_dump_card_state(ahd); 2506 } 2507 } 2508 if ((lastphase & ~P_DATAIN_DT) == 0 2509 || lastphase == P_COMMAND) { 2510 proto_violation_reset: 2511 /* 2512 * Target either went directly to data 2513 * phase or didn't respond to our ATN. 2514 * The only safe thing to do is to blow 2515 * it away with a bus reset. 2516 */ 2517 found = ahd_reset_channel(ahd, 'A', TRUE); 2518 printf("%s: Issued Channel %c Bus Reset. " 2519 "%d SCBs aborted\n", ahd_name(ahd), 'A', found); 2520 AHD_UNCORRECTABLE_ERROR(ahd); 2521 } else { 2522 /* 2523 * Leave the selection hardware off in case 2524 * this abort attempt will affect yet to 2525 * be sent commands. 2526 */ 2527 ahd_outb(ahd, SCSISEQ0, 2528 ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2529 ahd_assert_atn(ahd); 2530 ahd_outb(ahd, MSG_OUT, HOST_MSG); 2531 if (scb == NULL) { 2532 ahd_print_devinfo(ahd, &devinfo); 2533 ahd->msgout_buf[0] = MSG_ABORT_TASK; 2534 ahd->msgout_len = 1; 2535 ahd->msgout_index = 0; 2536 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2537 } else { 2538 ahd_print_path(ahd, scb); 2539 scb->flags |= SCB_ABORT; 2540 } 2541 printf("Protocol violation %s. Attempting to abort.\n", 2542 ahd_lookup_phase_entry(curphase)->phasemsg); 2543 AHD_UNCORRECTABLE_ERROR(ahd); 2544 } 2545 } 2546 2547 /* 2548 * Force renegotiation to occur the next time we initiate 2549 * a command to the current device. 2550 */ 2551 static void 2552 ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 2553 { 2554 struct ahd_initiator_tinfo *targ_info; 2555 struct ahd_tmode_tstate *tstate; 2556 2557 #ifdef AHD_DEBUG 2558 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 2559 ahd_print_devinfo(ahd, devinfo); 2560 printf("Forcing renegotiation\n"); 2561 } 2562 #endif 2563 targ_info = ahd_fetch_transinfo(ahd, 2564 devinfo->channel, 2565 devinfo->our_scsiid, 2566 devinfo->target, 2567 &tstate); 2568 ahd_update_neg_request(ahd, devinfo, tstate, 2569 targ_info, AHD_NEG_IF_NON_ASYNC); 2570 } 2571 2572 #define AHD_MAX_STEPS 2000 2573 void 2574 ahd_clear_critical_section(struct ahd_softc *ahd) 2575 { 2576 ahd_mode_state saved_modes; 2577 int stepping; 2578 int steps; 2579 int first_instr; 2580 u_int simode0; 2581 u_int simode1; 2582 u_int simode3; 2583 u_int lqimode0; 2584 u_int lqimode1; 2585 u_int lqomode0; 2586 u_int lqomode1; 2587 2588 if (ahd->num_critical_sections == 0) 2589 return; 2590 2591 stepping = FALSE; 2592 steps = 0; 2593 first_instr = 0; 2594 simode0 = 0; 2595 simode1 = 0; 2596 simode3 = 0; 2597 lqimode0 = 0; 2598 lqimode1 = 0; 2599 lqomode0 = 0; 2600 lqomode1 = 0; 2601 saved_modes = ahd_save_modes(ahd); 2602 for (;;) { 2603 struct cs *cs; 2604 u_int seqaddr; 2605 u_int i; 2606 2607 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2608 seqaddr = ahd_inw(ahd, CURADDR); 2609 2610 cs = ahd->critical_sections; 2611 for (i = 0; i < ahd->num_critical_sections; i++, cs++) { 2612 2613 if (cs->begin < seqaddr && cs->end >= seqaddr) 2614 break; 2615 } 2616 2617 if (i == ahd->num_critical_sections) 2618 break; 2619 2620 if (steps > AHD_MAX_STEPS) { 2621 printf("%s: Infinite loop in critical section\n" 2622 "%s: First Instruction 0x%x now 0x%x\n", 2623 ahd_name(ahd), ahd_name(ahd), first_instr, 2624 seqaddr); 2625 AHD_FATAL_ERROR(ahd); 2626 ahd_dump_card_state(ahd); 2627 panic("critical section loop"); 2628 } 2629 2630 steps++; 2631 #ifdef AHD_DEBUG 2632 if ((ahd_debug & AHD_SHOW_MISC) != 0) 2633 printf("%s: Single stepping at 0x%x\n", ahd_name(ahd), 2634 seqaddr); 2635 #endif 2636 if (stepping == FALSE) { 2637 first_instr = seqaddr; 2638 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2639 simode0 = ahd_inb(ahd, SIMODE0); 2640 simode3 = ahd_inb(ahd, SIMODE3); 2641 lqimode0 = ahd_inb(ahd, LQIMODE0); 2642 lqimode1 = ahd_inb(ahd, LQIMODE1); 2643 lqomode0 = ahd_inb(ahd, LQOMODE0); 2644 lqomode1 = ahd_inb(ahd, LQOMODE1); 2645 ahd_outb(ahd, SIMODE0, 0); 2646 ahd_outb(ahd, SIMODE3, 0); 2647 ahd_outb(ahd, LQIMODE0, 0); 2648 ahd_outb(ahd, LQIMODE1, 0); 2649 ahd_outb(ahd, LQOMODE0, 0); 2650 ahd_outb(ahd, LQOMODE1, 0); 2651 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2652 simode1 = ahd_inb(ahd, SIMODE1); 2653 /* 2654 * We don't clear ENBUSFREE. Unfortunately 2655 * we cannot re-enable busfree detection within 2656 * the current connection, so we must leave it 2657 * on while single stepping. 2658 */ 2659 ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE); 2660 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP); 2661 stepping = TRUE; 2662 } 2663 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 2664 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2665 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 2666 ahd_outb(ahd, HCNTRL, ahd->unpause); 2667 while (!ahd_is_paused(ahd)) 2668 aic_delay(200); 2669 ahd_update_modes(ahd); 2670 } 2671 if (stepping) { 2672 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2673 ahd_outb(ahd, SIMODE0, simode0); 2674 ahd_outb(ahd, SIMODE3, simode3); 2675 ahd_outb(ahd, LQIMODE0, lqimode0); 2676 ahd_outb(ahd, LQIMODE1, lqimode1); 2677 ahd_outb(ahd, LQOMODE0, lqomode0); 2678 ahd_outb(ahd, LQOMODE1, lqomode1); 2679 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2680 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP); 2681 ahd_outb(ahd, SIMODE1, simode1); 2682 /* 2683 * SCSIINT seems to glitch occasionally when 2684 * the interrupt masks are restored. Clear SCSIINT 2685 * one more time so that only persistent errors 2686 * are seen as a real interrupt. 2687 */ 2688 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2689 } 2690 ahd_restore_modes(ahd, saved_modes); 2691 } 2692 2693 /* 2694 * Clear any pending interrupt status. 2695 */ 2696 void 2697 ahd_clear_intstat(struct ahd_softc *ahd) 2698 { 2699 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 2700 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 2701 /* Clear any interrupt conditions this may have caused */ 2702 ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2 2703 |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD); 2704 ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT 2705 |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI 2706 |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ); 2707 ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ 2708 |CLRLQOATNPKT|CLRLQOTCRC); 2709 ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS 2710 |CLRLQOBUSFREE|CLRLQOPHACHGINPKT); 2711 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 2712 ahd_outb(ahd, CLRLQOINT0, 0); 2713 ahd_outb(ahd, CLRLQOINT1, 0); 2714 } 2715 ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR); 2716 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI 2717 |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT); 2718 ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO 2719 |CLRIOERR|CLROVERRUN); 2720 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2721 } 2722 2723 /**************************** Debugging Routines ******************************/ 2724 #ifdef AHD_DEBUG 2725 uint32_t ahd_debug = AHD_DEBUG_OPTS; 2726 #endif 2727 void 2728 ahd_print_scb(struct scb *scb) 2729 { 2730 struct hardware_scb *hscb; 2731 int i; 2732 2733 hscb = scb->hscb; 2734 printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n", 2735 (void *)scb, 2736 hscb->control, 2737 hscb->scsiid, 2738 hscb->lun, 2739 hscb->cdb_len); 2740 printf("Shared Data: "); 2741 for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++) 2742 printf("%#02x", hscb->shared_data.idata.cdb[i]); 2743 printf(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n", 2744 (uint32_t)((aic_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF), 2745 (uint32_t)(aic_le64toh(hscb->dataptr) & 0xFFFFFFFF), 2746 aic_le32toh(hscb->datacnt), 2747 aic_le32toh(hscb->sgptr), 2748 SCB_GET_TAG(scb)); 2749 ahd_dump_sglist(scb); 2750 } 2751 2752 void 2753 ahd_dump_sglist(struct scb *scb) 2754 { 2755 int i; 2756 2757 if (scb->sg_count > 0) { 2758 if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) { 2759 struct ahd_dma64_seg *sg_list; 2760 2761 sg_list = (struct ahd_dma64_seg*)scb->sg_list; 2762 for (i = 0; i < scb->sg_count; i++) { 2763 uint64_t addr; 2764 2765 addr = aic_le64toh(sg_list[i].addr); 2766 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2767 i, 2768 (uint32_t)((addr >> 32) & 0xFFFFFFFF), 2769 (uint32_t)(addr & 0xFFFFFFFF), 2770 sg_list[i].len & AHD_SG_LEN_MASK, 2771 (sg_list[i].len & AHD_DMA_LAST_SEG) 2772 ? " Last" : ""); 2773 } 2774 } else { 2775 struct ahd_dma_seg *sg_list; 2776 2777 sg_list = (struct ahd_dma_seg*)scb->sg_list; 2778 for (i = 0; i < scb->sg_count; i++) { 2779 uint32_t len; 2780 2781 len = aic_le32toh(sg_list[i].len); 2782 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2783 i, 2784 (len & AHD_SG_HIGH_ADDR_MASK) >> 24, 2785 aic_le32toh(sg_list[i].addr), 2786 len & AHD_SG_LEN_MASK, 2787 len & AHD_DMA_LAST_SEG ? " Last" : ""); 2788 } 2789 } 2790 } 2791 } 2792 2793 /************************* Transfer Negotiation *******************************/ 2794 /* 2795 * Allocate per target mode instance (ID we respond to as a target) 2796 * transfer negotiation data structures. 2797 */ 2798 static struct ahd_tmode_tstate * 2799 ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel) 2800 { 2801 struct ahd_tmode_tstate *master_tstate; 2802 struct ahd_tmode_tstate *tstate; 2803 int i; 2804 2805 master_tstate = ahd->enabled_targets[ahd->our_id]; 2806 if (ahd->enabled_targets[scsi_id] != NULL 2807 && ahd->enabled_targets[scsi_id] != master_tstate) 2808 panic("%s: ahd_alloc_tstate - Target already allocated", 2809 ahd_name(ahd)); 2810 tstate = malloc(sizeof(*tstate), M_DEVBUF, M_NOWAIT); 2811 if (tstate == NULL) 2812 return (NULL); 2813 2814 /* 2815 * If we have allocated a master tstate, copy user settings from 2816 * the master tstate (taken from SRAM or the EEPROM) for this 2817 * channel, but reset our current and goal settings to async/narrow 2818 * until an initiator talks to us. 2819 */ 2820 if (master_tstate != NULL) { 2821 memcpy(tstate, master_tstate, sizeof(*tstate)); 2822 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns)); 2823 for (i = 0; i < 16; i++) { 2824 memset(&tstate->transinfo[i].curr, 0, 2825 sizeof(tstate->transinfo[i].curr)); 2826 memset(&tstate->transinfo[i].goal, 0, 2827 sizeof(tstate->transinfo[i].goal)); 2828 } 2829 } else 2830 memset(tstate, 0, sizeof(*tstate)); 2831 ahd->enabled_targets[scsi_id] = tstate; 2832 return (tstate); 2833 } 2834 2835 #ifdef AHD_TARGET_MODE 2836 /* 2837 * Free per target mode instance (ID we respond to as a target) 2838 * transfer negotiation data structures. 2839 */ 2840 static void 2841 ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force) 2842 { 2843 struct ahd_tmode_tstate *tstate; 2844 2845 /* 2846 * Don't clean up our "master" tstate. 2847 * It has our default user settings. 2848 */ 2849 if (scsi_id == ahd->our_id 2850 && force == FALSE) 2851 return; 2852 2853 tstate = ahd->enabled_targets[scsi_id]; 2854 if (tstate != NULL) 2855 free(tstate, M_DEVBUF); 2856 ahd->enabled_targets[scsi_id] = NULL; 2857 } 2858 #endif 2859 2860 /* 2861 * Called when we have an active connection to a target on the bus, 2862 * this function finds the nearest period to the input period limited 2863 * by the capabilities of the bus connectivity of and sync settings for 2864 * the target. 2865 */ 2866 void 2867 ahd_devlimited_syncrate(struct ahd_softc *ahd, 2868 struct ahd_initiator_tinfo *tinfo, 2869 u_int *period, u_int *ppr_options, role_t role) 2870 { 2871 struct ahd_transinfo *transinfo; 2872 u_int maxsync; 2873 2874 if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0 2875 && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) { 2876 maxsync = AHD_SYNCRATE_PACED; 2877 } else { 2878 maxsync = AHD_SYNCRATE_ULTRA; 2879 /* Can't do DT related options on an SE bus */ 2880 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2881 } 2882 /* 2883 * Never allow a value higher than our current goal 2884 * period otherwise we may allow a target initiated 2885 * negotiation to go above the limit as set by the 2886 * user. In the case of an initiator initiated 2887 * sync negotiation, we limit based on the user 2888 * setting. This allows the system to still accept 2889 * incoming negotiations even if target initiated 2890 * negotiation is not performed. 2891 */ 2892 if (role == ROLE_TARGET) 2893 transinfo = &tinfo->user; 2894 else 2895 transinfo = &tinfo->goal; 2896 *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN); 2897 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) { 2898 maxsync = MAX(maxsync, AHD_SYNCRATE_ULTRA2); 2899 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2900 } 2901 if (transinfo->period == 0) { 2902 *period = 0; 2903 *ppr_options = 0; 2904 } else { 2905 *period = MAX(*period, transinfo->period); 2906 ahd_find_syncrate(ahd, period, ppr_options, maxsync); 2907 } 2908 } 2909 2910 /* 2911 * Look up the valid period to SCSIRATE conversion in our table. 2912 * Return the period and offset that should be sent to the target 2913 * if this was the beginning of an SDTR. 2914 */ 2915 void 2916 ahd_find_syncrate(struct ahd_softc *ahd, u_int *period, 2917 u_int *ppr_options, u_int maxsync) 2918 { 2919 if (*period < maxsync) 2920 *period = maxsync; 2921 2922 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0 2923 && *period > AHD_SYNCRATE_MIN_DT) 2924 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2925 2926 if (*period > AHD_SYNCRATE_MIN) 2927 *period = 0; 2928 2929 /* Honor PPR option conformance rules. */ 2930 if (*period > AHD_SYNCRATE_PACED) 2931 *ppr_options &= ~MSG_EXT_PPR_RTI; 2932 2933 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 2934 *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ); 2935 2936 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0) 2937 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2938 2939 /* Skip all PACED only entries if IU is not available */ 2940 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0 2941 && *period < AHD_SYNCRATE_DT) 2942 *period = AHD_SYNCRATE_DT; 2943 2944 /* Skip all DT only entries if DT is not available */ 2945 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0 2946 && *period < AHD_SYNCRATE_ULTRA2) 2947 *period = AHD_SYNCRATE_ULTRA2; 2948 } 2949 2950 /* 2951 * Truncate the given synchronous offset to a value the 2952 * current adapter type and syncrate are capable of. 2953 */ 2954 void 2955 ahd_validate_offset(struct ahd_softc *ahd, 2956 struct ahd_initiator_tinfo *tinfo, 2957 u_int period, u_int *offset, int wide, 2958 role_t role) 2959 { 2960 u_int maxoffset; 2961 2962 /* Limit offset to what we can do */ 2963 if (period == 0) 2964 maxoffset = 0; 2965 else if (period <= AHD_SYNCRATE_PACED) { 2966 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) 2967 maxoffset = MAX_OFFSET_PACED_BUG; 2968 else 2969 maxoffset = MAX_OFFSET_PACED; 2970 } else 2971 maxoffset = MAX_OFFSET_NON_PACED; 2972 *offset = MIN(*offset, maxoffset); 2973 if (tinfo != NULL) { 2974 if (role == ROLE_TARGET) 2975 *offset = MIN(*offset, tinfo->user.offset); 2976 else 2977 *offset = MIN(*offset, tinfo->goal.offset); 2978 } 2979 } 2980 2981 /* 2982 * Truncate the given transfer width parameter to a value the 2983 * current adapter type is capable of. 2984 */ 2985 void 2986 ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo, 2987 u_int *bus_width, role_t role) 2988 { 2989 switch (*bus_width) { 2990 default: 2991 if (ahd->features & AHD_WIDE) { 2992 /* Respond Wide */ 2993 *bus_width = MSG_EXT_WDTR_BUS_16_BIT; 2994 break; 2995 } 2996 /* FALLTHROUGH */ 2997 case MSG_EXT_WDTR_BUS_8_BIT: 2998 *bus_width = MSG_EXT_WDTR_BUS_8_BIT; 2999 break; 3000 } 3001 if (tinfo != NULL) { 3002 if (role == ROLE_TARGET) 3003 *bus_width = MIN(tinfo->user.width, *bus_width); 3004 else 3005 *bus_width = MIN(tinfo->goal.width, *bus_width); 3006 } 3007 } 3008 3009 /* 3010 * Update the bitmask of targets for which the controller should 3011 * negotiate with at the next convenient opportunity. This currently 3012 * means the next time we send the initial identify messages for 3013 * a new transaction. 3014 */ 3015 int 3016 ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3017 struct ahd_tmode_tstate *tstate, 3018 struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type) 3019 { 3020 u_int auto_negotiate_orig; 3021 3022 auto_negotiate_orig = tstate->auto_negotiate; 3023 if (neg_type == AHD_NEG_ALWAYS) { 3024 /* 3025 * Force our "current" settings to be 3026 * unknown so that unless a bus reset 3027 * occurs the need to renegotiate is 3028 * recorded persistently. 3029 */ 3030 if ((ahd->features & AHD_WIDE) != 0) 3031 tinfo->curr.width = AHD_WIDTH_UNKNOWN; 3032 tinfo->curr.period = AHD_PERIOD_UNKNOWN; 3033 tinfo->curr.offset = AHD_OFFSET_UNKNOWN; 3034 } 3035 if (tinfo->curr.period != tinfo->goal.period 3036 || tinfo->curr.width != tinfo->goal.width 3037 || tinfo->curr.offset != tinfo->goal.offset 3038 || tinfo->curr.ppr_options != tinfo->goal.ppr_options 3039 || (neg_type == AHD_NEG_IF_NON_ASYNC 3040 && (tinfo->goal.offset != 0 3041 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT 3042 || tinfo->goal.ppr_options != 0))) 3043 tstate->auto_negotiate |= devinfo->target_mask; 3044 else 3045 tstate->auto_negotiate &= ~devinfo->target_mask; 3046 3047 return (auto_negotiate_orig != tstate->auto_negotiate); 3048 } 3049 3050 /* 3051 * Update the user/goal/curr tables of synchronous negotiation 3052 * parameters as well as, in the case of a current or active update, 3053 * any data structures on the host controller. In the case of an 3054 * active update, the specified target is currently talking to us on 3055 * the bus, so the transfer parameter update must take effect 3056 * immediately. 3057 */ 3058 void 3059 ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3060 u_int period, u_int offset, u_int ppr_options, 3061 u_int type, int paused) 3062 { 3063 struct ahd_initiator_tinfo *tinfo; 3064 struct ahd_tmode_tstate *tstate; 3065 u_int old_period; 3066 u_int old_offset; 3067 u_int old_ppr; 3068 int active; 3069 int update_needed; 3070 3071 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 3072 update_needed = 0; 3073 3074 if (period == 0 || offset == 0) { 3075 period = 0; 3076 offset = 0; 3077 } 3078 3079 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3080 devinfo->target, &tstate); 3081 3082 if ((type & AHD_TRANS_USER) != 0) { 3083 tinfo->user.period = period; 3084 tinfo->user.offset = offset; 3085 tinfo->user.ppr_options = ppr_options; 3086 } 3087 3088 if ((type & AHD_TRANS_GOAL) != 0) { 3089 tinfo->goal.period = period; 3090 tinfo->goal.offset = offset; 3091 tinfo->goal.ppr_options = ppr_options; 3092 } 3093 3094 old_period = tinfo->curr.period; 3095 old_offset = tinfo->curr.offset; 3096 old_ppr = tinfo->curr.ppr_options; 3097 3098 if ((type & AHD_TRANS_CUR) != 0 3099 && (old_period != period 3100 || old_offset != offset 3101 || old_ppr != ppr_options)) { 3102 update_needed++; 3103 3104 tinfo->curr.period = period; 3105 tinfo->curr.offset = offset; 3106 tinfo->curr.ppr_options = ppr_options; 3107 3108 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3109 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3110 if (bootverbose) { 3111 if (offset != 0) { 3112 int options; 3113 3114 printf("%s: target %d synchronous with " 3115 "period = 0x%x, offset = 0x%x", 3116 ahd_name(ahd), devinfo->target, 3117 period, offset); 3118 options = 0; 3119 if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) { 3120 printf("(RDSTRM"); 3121 options++; 3122 } 3123 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) { 3124 printf("%s", options ? "|DT" : "(DT"); 3125 options++; 3126 } 3127 if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) { 3128 printf("%s", options ? "|IU" : "(IU"); 3129 options++; 3130 } 3131 if ((ppr_options & MSG_EXT_PPR_RTI) != 0) { 3132 printf("%s", options ? "|RTI" : "(RTI"); 3133 options++; 3134 } 3135 if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) { 3136 printf("%s", options ? "|QAS" : "(QAS"); 3137 options++; 3138 } 3139 if (options != 0) 3140 printf(")\n"); 3141 else 3142 printf("\n"); 3143 } else { 3144 printf("%s: target %d using " 3145 "asynchronous transfers%s\n", 3146 ahd_name(ahd), devinfo->target, 3147 (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0 3148 ? "(QAS)" : ""); 3149 } 3150 } 3151 } 3152 /* 3153 * Always refresh the neg-table to handle the case of the 3154 * sequencer setting the ENATNO bit for a MK_MESSAGE request. 3155 * We will always renegotiate in that case if this is a 3156 * packetized request. Also manage the busfree expected flag 3157 * from this common routine so that we catch changes due to 3158 * WDTR or SDTR messages. 3159 */ 3160 if ((type & AHD_TRANS_CUR) != 0) { 3161 if (!paused) 3162 ahd_pause(ahd); 3163 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3164 if (!paused) 3165 ahd_unpause(ahd); 3166 if (ahd->msg_type != MSG_TYPE_NONE) { 3167 if ((old_ppr & MSG_EXT_PPR_IU_REQ) 3168 != (ppr_options & MSG_EXT_PPR_IU_REQ)) { 3169 #ifdef AHD_DEBUG 3170 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3171 ahd_print_devinfo(ahd, devinfo); 3172 printf("Expecting IU Change busfree\n"); 3173 } 3174 #endif 3175 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 3176 | MSG_FLAG_IU_REQ_CHANGED; 3177 } 3178 if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) { 3179 #ifdef AHD_DEBUG 3180 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3181 printf("PPR with IU_REQ outstanding\n"); 3182 #endif 3183 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE; 3184 } 3185 } 3186 } 3187 3188 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3189 tinfo, AHD_NEG_TO_GOAL); 3190 3191 if (update_needed && active) 3192 ahd_update_pending_scbs(ahd); 3193 } 3194 3195 /* 3196 * Update the user/goal/curr tables of wide negotiation 3197 * parameters as well as, in the case of a current or active update, 3198 * any data structures on the host controller. In the case of an 3199 * active update, the specified target is currently talking to us on 3200 * the bus, so the transfer parameter update must take effect 3201 * immediately. 3202 */ 3203 void 3204 ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3205 u_int width, u_int type, int paused) 3206 { 3207 struct ahd_initiator_tinfo *tinfo; 3208 struct ahd_tmode_tstate *tstate; 3209 u_int oldwidth; 3210 int active; 3211 int update_needed; 3212 3213 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 3214 update_needed = 0; 3215 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3216 devinfo->target, &tstate); 3217 3218 if ((type & AHD_TRANS_USER) != 0) 3219 tinfo->user.width = width; 3220 3221 if ((type & AHD_TRANS_GOAL) != 0) 3222 tinfo->goal.width = width; 3223 3224 oldwidth = tinfo->curr.width; 3225 if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) { 3226 update_needed++; 3227 3228 tinfo->curr.width = width; 3229 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3230 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3231 if (bootverbose) { 3232 printf("%s: target %d using %dbit transfers\n", 3233 ahd_name(ahd), devinfo->target, 3234 8 * (0x01 << width)); 3235 } 3236 } 3237 3238 if ((type & AHD_TRANS_CUR) != 0) { 3239 if (!paused) 3240 ahd_pause(ahd); 3241 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3242 if (!paused) 3243 ahd_unpause(ahd); 3244 } 3245 3246 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3247 tinfo, AHD_NEG_TO_GOAL); 3248 if (update_needed && active) 3249 ahd_update_pending_scbs(ahd); 3250 3251 } 3252 3253 /* 3254 * Update the current state of tagged queuing for a given target. 3255 */ 3256 void 3257 ahd_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3258 ahd_queue_alg alg) 3259 { 3260 ahd_platform_set_tags(ahd, devinfo, alg); 3261 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3262 devinfo->lun, AC_TRANSFER_NEG, &alg); 3263 } 3264 3265 static void 3266 ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3267 struct ahd_transinfo *tinfo) 3268 { 3269 ahd_mode_state saved_modes; 3270 u_int period; 3271 u_int ppr_opts; 3272 u_int con_opts; 3273 u_int offset; 3274 u_int saved_negoaddr; 3275 uint8_t iocell_opts[sizeof(ahd->iocell_opts)]; 3276 3277 saved_modes = ahd_save_modes(ahd); 3278 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3279 3280 saved_negoaddr = ahd_inb(ahd, NEGOADDR); 3281 ahd_outb(ahd, NEGOADDR, devinfo->target); 3282 period = tinfo->period; 3283 offset = tinfo->offset; 3284 memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts)); 3285 ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ 3286 |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI); 3287 con_opts = 0; 3288 if (period == 0) 3289 period = AHD_SYNCRATE_ASYNC; 3290 if (period == AHD_SYNCRATE_160) { 3291 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 3292 /* 3293 * When the SPI4 spec was finalized, PACE transfers 3294 * was not made a configurable option in the PPR 3295 * message. Instead it is assumed to be enabled for 3296 * any syncrate faster than 80MHz. Nevertheless, 3297 * Harpoon2A4 allows this to be configurable. 3298 * 3299 * Harpoon2A4 also assumes at most 2 data bytes per 3300 * negotiated REQ/ACK offset. Paced transfers take 3301 * 4, so we must adjust our offset. 3302 */ 3303 ppr_opts |= PPROPT_PACE; 3304 offset *= 2; 3305 3306 /* 3307 * Harpoon2A assumed that there would be a 3308 * fallback rate between 160MHz and 80Mhz, 3309 * so 7 is used as the period factor rather 3310 * than 8 for 160MHz. 3311 */ 3312 period = AHD_SYNCRATE_REVA_160; 3313 } 3314 if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0) 3315 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 3316 ~AHD_PRECOMP_MASK; 3317 } else { 3318 /* 3319 * Precomp should be disabled for non-paced transfers. 3320 */ 3321 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK; 3322 3323 if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0 3324 && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0 3325 && (ppr_opts & MSG_EXT_PPR_IU_REQ) == 0) { 3326 /* 3327 * Slow down our CRC interval to be 3328 * compatible with non-packetized 3329 * U160 devices that can't handle a 3330 * CRC at full speed. 3331 */ 3332 con_opts |= ENSLOWCRC; 3333 } 3334 3335 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 3336 /* 3337 * On H2A4, revert to a slower slewrate 3338 * on non-paced transfers. 3339 */ 3340 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 3341 ~AHD_SLEWRATE_MASK; 3342 } 3343 } 3344 3345 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW); 3346 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]); 3347 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE); 3348 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]); 3349 3350 ahd_outb(ahd, NEGPERIOD, period); 3351 ahd_outb(ahd, NEGPPROPTS, ppr_opts); 3352 ahd_outb(ahd, NEGOFFSET, offset); 3353 3354 if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT) 3355 con_opts |= WIDEXFER; 3356 3357 /* 3358 * During packetized transfers, the target will 3359 * give us the opportunity to send command packets 3360 * without us asserting attention. 3361 */ 3362 if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 3363 con_opts |= ENAUTOATNO; 3364 ahd_outb(ahd, NEGCONOPTS, con_opts); 3365 ahd_outb(ahd, NEGOADDR, saved_negoaddr); 3366 ahd_restore_modes(ahd, saved_modes); 3367 } 3368 3369 /* 3370 * When the transfer settings for a connection change, setup for 3371 * negotiation in pending SCBs to effect the change as quickly as 3372 * possible. We also cancel any negotiations that are scheduled 3373 * for inflight SCBs that have not been started yet. 3374 */ 3375 static void 3376 ahd_update_pending_scbs(struct ahd_softc *ahd) 3377 { 3378 struct scb *pending_scb; 3379 int pending_scb_count; 3380 int paused; 3381 u_int saved_scbptr; 3382 ahd_mode_state saved_modes; 3383 3384 /* 3385 * Traverse the pending SCB list and ensure that all of the 3386 * SCBs there have the proper settings. We can only safely 3387 * clear the negotiation required flag (setting requires the 3388 * execution queue to be modified) and this is only possible 3389 * if we are not already attempting to select out for this 3390 * SCB. For this reason, all callers only call this routine 3391 * if we are changing the negotiation settings for the currently 3392 * active transaction on the bus. 3393 */ 3394 pending_scb_count = 0; 3395 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 3396 struct ahd_devinfo devinfo; 3397 struct ahd_tmode_tstate *tstate; 3398 3399 ahd_scb_devinfo(ahd, &devinfo, pending_scb); 3400 ahd_fetch_transinfo(ahd, devinfo.channel, 3401 devinfo.our_scsiid, 3402 devinfo.target, &tstate); 3403 if ((tstate->auto_negotiate & devinfo.target_mask) == 0 3404 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) { 3405 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE; 3406 pending_scb->hscb->control &= ~MK_MESSAGE; 3407 } 3408 ahd_sync_scb(ahd, pending_scb, 3409 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 3410 pending_scb_count++; 3411 } 3412 3413 if (pending_scb_count == 0) 3414 return; 3415 3416 if (ahd_is_paused(ahd)) { 3417 paused = 1; 3418 } else { 3419 paused = 0; 3420 ahd_pause(ahd); 3421 } 3422 3423 /* 3424 * Force the sequencer to reinitialize the selection for 3425 * the command at the head of the execution queue if it 3426 * has already been setup. The negotiation changes may 3427 * effect whether we select-out with ATN. It is only 3428 * safe to clear ENSELO when the bus is not free and no 3429 * selection is in progres or completed. 3430 */ 3431 saved_modes = ahd_save_modes(ahd); 3432 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3433 if ((ahd_inb(ahd, SCSISIGI) & BSYI) != 0 3434 && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0) 3435 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 3436 saved_scbptr = ahd_get_scbptr(ahd); 3437 /* Ensure that the hscbs down on the card match the new information */ 3438 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 3439 u_int scb_tag; 3440 u_int control; 3441 3442 scb_tag = SCB_GET_TAG(pending_scb); 3443 ahd_set_scbptr(ahd, scb_tag); 3444 control = ahd_inb_scbram(ahd, SCB_CONTROL); 3445 control &= ~MK_MESSAGE; 3446 control |= pending_scb->hscb->control & MK_MESSAGE; 3447 ahd_outb(ahd, SCB_CONTROL, control); 3448 } 3449 ahd_set_scbptr(ahd, saved_scbptr); 3450 ahd_restore_modes(ahd, saved_modes); 3451 3452 if (paused == 0) 3453 ahd_unpause(ahd); 3454 } 3455 3456 /**************************** Pathing Information *****************************/ 3457 static void 3458 ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3459 { 3460 ahd_mode_state saved_modes; 3461 u_int saved_scsiid; 3462 role_t role; 3463 int our_id; 3464 3465 saved_modes = ahd_save_modes(ahd); 3466 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3467 3468 if (ahd_inb(ahd, SSTAT0) & TARGET) 3469 role = ROLE_TARGET; 3470 else 3471 role = ROLE_INITIATOR; 3472 3473 if (role == ROLE_TARGET 3474 && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) { 3475 /* We were selected, so pull our id from TARGIDIN */ 3476 our_id = ahd_inb(ahd, TARGIDIN) & OID; 3477 } else if (role == ROLE_TARGET) 3478 our_id = ahd_inb(ahd, TOWNID); 3479 else 3480 our_id = ahd_inb(ahd, IOWNID); 3481 3482 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 3483 ahd_compile_devinfo(devinfo, 3484 our_id, 3485 SCSIID_TARGET(ahd, saved_scsiid), 3486 ahd_inb(ahd, SAVED_LUN), 3487 SCSIID_CHANNEL(ahd, saved_scsiid), 3488 role); 3489 ahd_restore_modes(ahd, saved_modes); 3490 } 3491 3492 void 3493 ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3494 { 3495 printf("%s:%c:%d:%d: ", ahd_name(ahd), 'A', 3496 devinfo->target, devinfo->lun); 3497 } 3498 3499 struct ahd_phase_table_entry* 3500 ahd_lookup_phase_entry(int phase) 3501 { 3502 struct ahd_phase_table_entry *entry; 3503 struct ahd_phase_table_entry *last_entry; 3504 3505 /* 3506 * num_phases doesn't include the default entry which 3507 * will be returned if the phase doesn't match. 3508 */ 3509 last_entry = &ahd_phase_table[num_phases]; 3510 for (entry = ahd_phase_table; entry < last_entry; entry++) { 3511 if (phase == entry->phase) 3512 break; 3513 } 3514 return (entry); 3515 } 3516 3517 void 3518 ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target, 3519 u_int lun, char channel, role_t role) 3520 { 3521 devinfo->our_scsiid = our_id; 3522 devinfo->target = target; 3523 devinfo->lun = lun; 3524 devinfo->target_offset = target; 3525 devinfo->channel = channel; 3526 devinfo->role = role; 3527 if (channel == 'B') 3528 devinfo->target_offset += 8; 3529 devinfo->target_mask = (0x01 << devinfo->target_offset); 3530 } 3531 3532 static void 3533 ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3534 struct scb *scb) 3535 { 3536 role_t role; 3537 int our_id; 3538 3539 our_id = SCSIID_OUR_ID(scb->hscb->scsiid); 3540 role = ROLE_INITIATOR; 3541 if ((scb->hscb->control & TARGET_SCB) != 0) 3542 role = ROLE_TARGET; 3543 ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb), 3544 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role); 3545 } 3546 3547 /************************ Message Phase Processing ****************************/ 3548 /* 3549 * When an initiator transaction with the MK_MESSAGE flag either reconnects 3550 * or enters the initial message out phase, we are interrupted. Fill our 3551 * outgoing message buffer with the appropriate message and beging handing 3552 * the message phase(s) manually. 3553 */ 3554 static void 3555 ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3556 struct scb *scb) 3557 { 3558 /* 3559 * To facilitate adding multiple messages together, 3560 * each routine should increment the index and len 3561 * variables instead of setting them explicitly. 3562 */ 3563 ahd->msgout_index = 0; 3564 ahd->msgout_len = 0; 3565 3566 if (ahd_currently_packetized(ahd)) 3567 ahd->msg_flags |= MSG_FLAG_PACKETIZED; 3568 3569 if (ahd->send_msg_perror 3570 && ahd_inb(ahd, MSG_OUT) == HOST_MSG) { 3571 ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror; 3572 ahd->msgout_len++; 3573 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3574 #ifdef AHD_DEBUG 3575 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3576 printf("Setting up for Parity Error delivery\n"); 3577 #endif 3578 return; 3579 } else if (scb == NULL) { 3580 printf("%s: WARNING. No pending message for " 3581 "I_T msgin. Issuing NO-OP\n", ahd_name(ahd)); 3582 AHD_CORRECTABLE_ERROR(ahd); 3583 ahd->msgout_buf[ahd->msgout_index++] = MSG_NOOP; 3584 ahd->msgout_len++; 3585 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3586 return; 3587 } 3588 3589 if ((scb->flags & SCB_DEVICE_RESET) == 0 3590 && (scb->flags & SCB_PACKETIZED) == 0 3591 && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) { 3592 u_int identify_msg; 3593 3594 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb); 3595 if ((scb->hscb->control & DISCENB) != 0) 3596 identify_msg |= MSG_IDENTIFY_DISCFLAG; 3597 ahd->msgout_buf[ahd->msgout_index++] = identify_msg; 3598 ahd->msgout_len++; 3599 3600 if ((scb->hscb->control & TAG_ENB) != 0) { 3601 ahd->msgout_buf[ahd->msgout_index++] = 3602 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE); 3603 ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb); 3604 ahd->msgout_len += 2; 3605 } 3606 } 3607 3608 if (scb->flags & SCB_DEVICE_RESET) { 3609 ahd->msgout_buf[ahd->msgout_index++] = MSG_BUS_DEV_RESET; 3610 ahd->msgout_len++; 3611 ahd_print_path(ahd, scb); 3612 printf("Bus Device Reset Message Sent\n"); 3613 AHD_CORRECTABLE_ERROR(ahd); 3614 /* 3615 * Clear our selection hardware in advance of 3616 * the busfree. We may have an entry in the waiting 3617 * Q for this target, and we don't want to go about 3618 * selecting while we handle the busfree and blow it 3619 * away. 3620 */ 3621 ahd_outb(ahd, SCSISEQ0, 0); 3622 } else if ((scb->flags & SCB_ABORT) != 0) { 3623 if ((scb->hscb->control & TAG_ENB) != 0) { 3624 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT_TAG; 3625 } else { 3626 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT; 3627 } 3628 ahd->msgout_len++; 3629 ahd_print_path(ahd, scb); 3630 printf("Abort%s Message Sent\n", 3631 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : ""); 3632 AHD_CORRECTABLE_ERROR(ahd); 3633 /* 3634 * Clear our selection hardware in advance of 3635 * the busfree. We may have an entry in the waiting 3636 * Q for this target, and we don't want to go about 3637 * selecting while we handle the busfree and blow it 3638 * away. 3639 */ 3640 ahd_outb(ahd, SCSISEQ0, 0); 3641 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) { 3642 ahd_build_transfer_msg(ahd, devinfo); 3643 /* 3644 * Clear our selection hardware in advance of potential 3645 * PPR IU status change busfree. We may have an entry in 3646 * the waiting Q for this target, and we don't want to go 3647 * about selecting while we handle the busfree and blow 3648 * it away. 3649 */ 3650 ahd_outb(ahd, SCSISEQ0, 0); 3651 } else { 3652 printf("ahd_intr: AWAITING_MSG for an SCB that " 3653 "does not have a waiting message\n"); 3654 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid, 3655 devinfo->target_mask); 3656 AHD_FATAL_ERROR(ahd); 3657 panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x " 3658 "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control, 3659 ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT), 3660 scb->flags); 3661 } 3662 3663 /* 3664 * Clear the MK_MESSAGE flag from the SCB so we aren't 3665 * asked to send this message again. 3666 */ 3667 ahd_outb(ahd, SCB_CONTROL, 3668 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 3669 scb->hscb->control &= ~MK_MESSAGE; 3670 ahd->msgout_index = 0; 3671 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3672 } 3673 3674 /* 3675 * Build an appropriate transfer negotiation message for the 3676 * currently active target. 3677 */ 3678 static void 3679 ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3680 { 3681 /* 3682 * We need to initiate transfer negotiations. 3683 * If our current and goal settings are identical, 3684 * we want to renegotiate due to a check condition. 3685 */ 3686 struct ahd_initiator_tinfo *tinfo; 3687 struct ahd_tmode_tstate *tstate; 3688 int dowide; 3689 int dosync; 3690 int doppr; 3691 u_int period; 3692 u_int ppr_options; 3693 u_int offset; 3694 3695 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3696 devinfo->target, &tstate); 3697 /* 3698 * Filter our period based on the current connection. 3699 * If we can't perform DT transfers on this segment (not in LVD 3700 * mode for instance), then our decision to issue a PPR message 3701 * may change. 3702 */ 3703 period = tinfo->goal.period; 3704 offset = tinfo->goal.offset; 3705 ppr_options = tinfo->goal.ppr_options; 3706 /* Target initiated PPR is not allowed in the SCSI spec */ 3707 if (devinfo->role == ROLE_TARGET) 3708 ppr_options = 0; 3709 ahd_devlimited_syncrate(ahd, tinfo, &period, 3710 &ppr_options, devinfo->role); 3711 dowide = tinfo->curr.width != tinfo->goal.width; 3712 dosync = tinfo->curr.offset != offset || tinfo->curr.period != period; 3713 /* 3714 * Only use PPR if we have options that need it, even if the device 3715 * claims to support it. There might be an expander in the way 3716 * that doesn't. 3717 */ 3718 doppr = ppr_options != 0; 3719 3720 if (!dowide && !dosync && !doppr) { 3721 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT; 3722 dosync = tinfo->goal.offset != 0; 3723 } 3724 3725 if (!dowide && !dosync && !doppr) { 3726 /* 3727 * Force async with a WDTR message if we have a wide bus, 3728 * or just issue an SDTR with a 0 offset. 3729 */ 3730 if ((ahd->features & AHD_WIDE) != 0) 3731 dowide = 1; 3732 else 3733 dosync = 1; 3734 3735 if (bootverbose) { 3736 ahd_print_devinfo(ahd, devinfo); 3737 printf("Ensuring async\n"); 3738 } 3739 } 3740 /* Target initiated PPR is not allowed in the SCSI spec */ 3741 if (devinfo->role == ROLE_TARGET) 3742 doppr = 0; 3743 3744 /* 3745 * Both the PPR message and SDTR message require the 3746 * goal syncrate to be limited to what the target device 3747 * is capable of handling (based on whether an LVD->SE 3748 * expander is on the bus), so combine these two cases. 3749 * Regardless, guarantee that if we are using WDTR and SDTR 3750 * messages that WDTR comes first. 3751 */ 3752 if (doppr || (dosync && !dowide)) { 3753 offset = tinfo->goal.offset; 3754 ahd_validate_offset(ahd, tinfo, period, &offset, 3755 doppr ? tinfo->goal.width 3756 : tinfo->curr.width, 3757 devinfo->role); 3758 if (doppr) { 3759 ahd_construct_ppr(ahd, devinfo, period, offset, 3760 tinfo->goal.width, ppr_options); 3761 } else { 3762 ahd_construct_sdtr(ahd, devinfo, period, offset); 3763 } 3764 } else { 3765 ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width); 3766 } 3767 } 3768 3769 /* 3770 * Build a synchronous negotiation message in our message 3771 * buffer based on the input parameters. 3772 */ 3773 static void 3774 ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3775 u_int period, u_int offset) 3776 { 3777 if (offset == 0) 3778 period = AHD_ASYNC_XFER_PERIOD; 3779 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3780 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR_LEN; 3781 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR; 3782 ahd->msgout_buf[ahd->msgout_index++] = period; 3783 ahd->msgout_buf[ahd->msgout_index++] = offset; 3784 ahd->msgout_len += 5; 3785 if (bootverbose) { 3786 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n", 3787 ahd_name(ahd), devinfo->channel, devinfo->target, 3788 devinfo->lun, period, offset); 3789 } 3790 } 3791 3792 /* 3793 * Build a wide negotiateion message in our message 3794 * buffer based on the input parameters. 3795 */ 3796 static void 3797 ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3798 u_int bus_width) 3799 { 3800 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3801 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR_LEN; 3802 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR; 3803 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3804 ahd->msgout_len += 4; 3805 if (bootverbose) { 3806 printf("(%s:%c:%d:%d): Sending WDTR %x\n", 3807 ahd_name(ahd), devinfo->channel, devinfo->target, 3808 devinfo->lun, bus_width); 3809 } 3810 } 3811 3812 /* 3813 * Build a parallel protocol request message in our message 3814 * buffer based on the input parameters. 3815 */ 3816 static void 3817 ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3818 u_int period, u_int offset, u_int bus_width, 3819 u_int ppr_options) 3820 { 3821 /* 3822 * Always request precompensation from 3823 * the other target if we are running 3824 * at paced syncrates. 3825 */ 3826 if (period <= AHD_SYNCRATE_PACED) 3827 ppr_options |= MSG_EXT_PPR_PCOMP_EN; 3828 if (offset == 0) 3829 period = AHD_ASYNC_XFER_PERIOD; 3830 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3831 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR_LEN; 3832 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR; 3833 ahd->msgout_buf[ahd->msgout_index++] = period; 3834 ahd->msgout_buf[ahd->msgout_index++] = 0; 3835 ahd->msgout_buf[ahd->msgout_index++] = offset; 3836 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3837 ahd->msgout_buf[ahd->msgout_index++] = ppr_options; 3838 ahd->msgout_len += 8; 3839 if (bootverbose) { 3840 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, " 3841 "offset %x, ppr_options %x\n", ahd_name(ahd), 3842 devinfo->channel, devinfo->target, devinfo->lun, 3843 bus_width, period, offset, ppr_options); 3844 } 3845 } 3846 3847 /* 3848 * Clear any active message state. 3849 */ 3850 static void 3851 ahd_clear_msg_state(struct ahd_softc *ahd) 3852 { 3853 ahd_mode_state saved_modes; 3854 3855 saved_modes = ahd_save_modes(ahd); 3856 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3857 ahd->send_msg_perror = 0; 3858 ahd->msg_flags = MSG_FLAG_NONE; 3859 ahd->msgout_len = 0; 3860 ahd->msgin_index = 0; 3861 ahd->msg_type = MSG_TYPE_NONE; 3862 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 3863 /* 3864 * The target didn't care to respond to our 3865 * message request, so clear ATN. 3866 */ 3867 ahd_outb(ahd, CLRSINT1, CLRATNO); 3868 } 3869 ahd_outb(ahd, MSG_OUT, MSG_NOOP); 3870 ahd_outb(ahd, SEQ_FLAGS2, 3871 ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING); 3872 ahd_restore_modes(ahd, saved_modes); 3873 } 3874 3875 /* 3876 * Manual message loop handler. 3877 */ 3878 static void 3879 ahd_handle_message_phase(struct ahd_softc *ahd) 3880 { 3881 struct ahd_devinfo devinfo; 3882 u_int bus_phase; 3883 int end_session; 3884 3885 ahd_fetch_devinfo(ahd, &devinfo); 3886 end_session = FALSE; 3887 bus_phase = ahd_inb(ahd, LASTPHASE); 3888 3889 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) { 3890 printf("LQIRETRY for LQIPHASE_OUTPKT\n"); 3891 ahd_outb(ahd, LQCTL2, LQIRETRY); 3892 } 3893 reswitch: 3894 switch (ahd->msg_type) { 3895 case MSG_TYPE_INITIATOR_MSGOUT: 3896 { 3897 int lastbyte; 3898 int phasemis; 3899 int msgdone; 3900 3901 if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0) 3902 panic("HOST_MSG_LOOP interrupt with no active message"); 3903 3904 #ifdef AHD_DEBUG 3905 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3906 ahd_print_devinfo(ahd, &devinfo); 3907 printf("INITIATOR_MSG_OUT"); 3908 } 3909 #endif 3910 phasemis = bus_phase != P_MESGOUT; 3911 if (phasemis) { 3912 #ifdef AHD_DEBUG 3913 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3914 printf(" PHASEMIS %s\n", 3915 ahd_lookup_phase_entry(bus_phase) 3916 ->phasemsg); 3917 } 3918 #endif 3919 if (bus_phase == P_MESGIN) { 3920 /* 3921 * Change gears and see if 3922 * this messages is of interest to 3923 * us or should be passed back to 3924 * the sequencer. 3925 */ 3926 ahd_outb(ahd, CLRSINT1, CLRATNO); 3927 ahd->send_msg_perror = 0; 3928 ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN; 3929 ahd->msgin_index = 0; 3930 goto reswitch; 3931 } 3932 end_session = TRUE; 3933 break; 3934 } 3935 3936 if (ahd->send_msg_perror) { 3937 ahd_outb(ahd, CLRSINT1, CLRATNO); 3938 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3939 #ifdef AHD_DEBUG 3940 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3941 printf(" byte 0x%x\n", ahd->send_msg_perror); 3942 #endif 3943 /* 3944 * If we are notifying the target of a CRC error 3945 * during packetized operations, the target is 3946 * within its rights to acknowledge our message 3947 * with a busfree. 3948 */ 3949 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0 3950 && ahd->send_msg_perror == MSG_INITIATOR_DET_ERR) 3951 ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE; 3952 3953 ahd_outb(ahd, RETURN_2, ahd->send_msg_perror); 3954 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 3955 break; 3956 } 3957 3958 msgdone = ahd->msgout_index == ahd->msgout_len; 3959 if (msgdone) { 3960 /* 3961 * The target has requested a retry. 3962 * Re-assert ATN, reset our message index to 3963 * 0, and try again. 3964 */ 3965 ahd->msgout_index = 0; 3966 ahd_assert_atn(ahd); 3967 } 3968 3969 lastbyte = ahd->msgout_index == (ahd->msgout_len - 1); 3970 if (lastbyte) { 3971 /* Last byte is signified by dropping ATN */ 3972 ahd_outb(ahd, CLRSINT1, CLRATNO); 3973 } 3974 3975 /* 3976 * Clear our interrupt status and present 3977 * the next byte on the bus. 3978 */ 3979 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3980 #ifdef AHD_DEBUG 3981 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3982 printf(" byte 0x%x\n", 3983 ahd->msgout_buf[ahd->msgout_index]); 3984 #endif 3985 ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]); 3986 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 3987 break; 3988 } 3989 case MSG_TYPE_INITIATOR_MSGIN: 3990 { 3991 int phasemis; 3992 int message_done; 3993 3994 #ifdef AHD_DEBUG 3995 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3996 ahd_print_devinfo(ahd, &devinfo); 3997 printf("INITIATOR_MSG_IN"); 3998 } 3999 #endif 4000 phasemis = bus_phase != P_MESGIN; 4001 if (phasemis) { 4002 #ifdef AHD_DEBUG 4003 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4004 printf(" PHASEMIS %s\n", 4005 ahd_lookup_phase_entry(bus_phase) 4006 ->phasemsg); 4007 } 4008 #endif 4009 ahd->msgin_index = 0; 4010 if (bus_phase == P_MESGOUT 4011 && (ahd->send_msg_perror != 0 4012 || (ahd->msgout_len != 0 4013 && ahd->msgout_index == 0))) { 4014 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 4015 goto reswitch; 4016 } 4017 end_session = TRUE; 4018 break; 4019 } 4020 4021 /* Pull the byte in without acking it */ 4022 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS); 4023 #ifdef AHD_DEBUG 4024 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4025 printf(" byte 0x%x\n", 4026 ahd->msgin_buf[ahd->msgin_index]); 4027 #endif 4028 4029 message_done = ahd_parse_msg(ahd, &devinfo); 4030 4031 if (message_done) { 4032 /* 4033 * Clear our incoming message buffer in case there 4034 * is another message following this one. 4035 */ 4036 ahd->msgin_index = 0; 4037 4038 /* 4039 * If this message illicited a response, 4040 * assert ATN so the target takes us to the 4041 * message out phase. 4042 */ 4043 if (ahd->msgout_len != 0) { 4044 #ifdef AHD_DEBUG 4045 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4046 ahd_print_devinfo(ahd, &devinfo); 4047 printf("Asserting ATN for response\n"); 4048 } 4049 #endif 4050 ahd_assert_atn(ahd); 4051 } 4052 } else 4053 ahd->msgin_index++; 4054 4055 if (message_done == MSGLOOP_TERMINATED) { 4056 end_session = TRUE; 4057 } else { 4058 /* Ack the byte */ 4059 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 4060 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ); 4061 } 4062 break; 4063 } 4064 case MSG_TYPE_TARGET_MSGIN: 4065 { 4066 int msgdone; 4067 int msgout_request; 4068 4069 /* 4070 * By default, the message loop will continue. 4071 */ 4072 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4073 4074 if (ahd->msgout_len == 0) 4075 panic("Target MSGIN with no active message"); 4076 4077 /* 4078 * If we interrupted a mesgout session, the initiator 4079 * will not know this until our first REQ. So, we 4080 * only honor mesgout requests after we've sent our 4081 * first byte. 4082 */ 4083 if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0 4084 && ahd->msgout_index > 0) 4085 msgout_request = TRUE; 4086 else 4087 msgout_request = FALSE; 4088 4089 if (msgout_request) { 4090 /* 4091 * Change gears and see if 4092 * this messages is of interest to 4093 * us or should be passed back to 4094 * the sequencer. 4095 */ 4096 ahd->msg_type = MSG_TYPE_TARGET_MSGOUT; 4097 ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO); 4098 ahd->msgin_index = 0; 4099 /* Dummy read to REQ for first byte */ 4100 ahd_inb(ahd, SCSIDAT); 4101 ahd_outb(ahd, SXFRCTL0, 4102 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4103 break; 4104 } 4105 4106 msgdone = ahd->msgout_index == ahd->msgout_len; 4107 if (msgdone) { 4108 ahd_outb(ahd, SXFRCTL0, 4109 ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4110 end_session = TRUE; 4111 break; 4112 } 4113 4114 /* 4115 * Present the next byte on the bus. 4116 */ 4117 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4118 ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]); 4119 break; 4120 } 4121 case MSG_TYPE_TARGET_MSGOUT: 4122 { 4123 int lastbyte; 4124 int msgdone; 4125 4126 /* 4127 * By default, the message loop will continue. 4128 */ 4129 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4130 4131 /* 4132 * The initiator signals that this is 4133 * the last byte by dropping ATN. 4134 */ 4135 lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0; 4136 4137 /* 4138 * Read the latched byte, but turn off SPIOEN first 4139 * so that we don't inadvertently cause a REQ for the 4140 * next byte. 4141 */ 4142 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4143 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT); 4144 msgdone = ahd_parse_msg(ahd, &devinfo); 4145 if (msgdone == MSGLOOP_TERMINATED) { 4146 /* 4147 * The message is *really* done in that it caused 4148 * us to go to bus free. The sequencer has already 4149 * been reset at this point, so pull the ejection 4150 * handle. 4151 */ 4152 return; 4153 } 4154 4155 ahd->msgin_index++; 4156 4157 /* 4158 * XXX Read spec about initiator dropping ATN too soon 4159 * and use msgdone to detect it. 4160 */ 4161 if (msgdone == MSGLOOP_MSGCOMPLETE) { 4162 ahd->msgin_index = 0; 4163 4164 /* 4165 * If this message illicited a response, transition 4166 * to the Message in phase and send it. 4167 */ 4168 if (ahd->msgout_len != 0) { 4169 ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO); 4170 ahd_outb(ahd, SXFRCTL0, 4171 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4172 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 4173 ahd->msgin_index = 0; 4174 break; 4175 } 4176 } 4177 4178 if (lastbyte) 4179 end_session = TRUE; 4180 else { 4181 /* Ask for the next byte. */ 4182 ahd_outb(ahd, SXFRCTL0, 4183 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4184 } 4185 4186 break; 4187 } 4188 default: 4189 panic("Unknown REQINIT message type"); 4190 } 4191 4192 if (end_session) { 4193 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) { 4194 printf("%s: Returning to Idle Loop\n", 4195 ahd_name(ahd)); 4196 ahd_clear_msg_state(ahd); 4197 4198 /* 4199 * Perform the equivalent of a clear_target_state. 4200 */ 4201 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 4202 ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT); 4203 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 4204 } else { 4205 ahd_clear_msg_state(ahd); 4206 ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP); 4207 } 4208 } 4209 } 4210 4211 /* 4212 * See if we sent a particular extended message to the target. 4213 * If "full" is true, return true only if the target saw the full 4214 * message. If "full" is false, return true if the target saw at 4215 * least the first byte of the message. 4216 */ 4217 static int 4218 ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full) 4219 { 4220 int found; 4221 u_int index; 4222 4223 found = FALSE; 4224 index = 0; 4225 4226 while (index < ahd->msgout_len) { 4227 if (ahd->msgout_buf[index] == MSG_EXTENDED) { 4228 u_int end_index; 4229 4230 end_index = index + 1 + ahd->msgout_buf[index + 1]; 4231 if (ahd->msgout_buf[index+2] == msgval 4232 && type == AHDMSG_EXT) { 4233 if (full) { 4234 if (ahd->msgout_index > end_index) 4235 found = TRUE; 4236 } else if (ahd->msgout_index > index) 4237 found = TRUE; 4238 } 4239 index = end_index; 4240 } else if (ahd->msgout_buf[index] >= MSG_SIMPLE_TASK 4241 && ahd->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) { 4242 /* Skip tag type and tag id or residue param*/ 4243 index += 2; 4244 } else { 4245 /* Single byte message */ 4246 if (type == AHDMSG_1B 4247 && ahd->msgout_index > index 4248 && (ahd->msgout_buf[index] == msgval 4249 || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0 4250 && msgval == MSG_IDENTIFYFLAG))) 4251 found = TRUE; 4252 index++; 4253 } 4254 4255 if (found) 4256 break; 4257 } 4258 return (found); 4259 } 4260 4261 /* 4262 * Wait for a complete incoming message, parse it, and respond accordingly. 4263 */ 4264 static int 4265 ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4266 { 4267 struct ahd_initiator_tinfo *tinfo; 4268 struct ahd_tmode_tstate *tstate; 4269 int reject; 4270 int done; 4271 int response; 4272 4273 done = MSGLOOP_IN_PROG; 4274 response = FALSE; 4275 reject = FALSE; 4276 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 4277 devinfo->target, &tstate); 4278 4279 /* 4280 * Parse as much of the message as is available, 4281 * rejecting it if we don't support it. When 4282 * the entire message is available and has been 4283 * handled, return MSGLOOP_MSGCOMPLETE, indicating 4284 * that we have parsed an entire message. 4285 * 4286 * In the case of extended messages, we accept the length 4287 * byte outright and perform more checking once we know the 4288 * extended message type. 4289 */ 4290 switch (ahd->msgin_buf[0]) { 4291 case MSG_DISCONNECT: 4292 case MSG_SAVEDATAPOINTER: 4293 case MSG_CMDCOMPLETE: 4294 case MSG_RESTOREPOINTERS: 4295 case MSG_IGN_WIDE_RESIDUE: 4296 /* 4297 * End our message loop as these are messages 4298 * the sequencer handles on its own. 4299 */ 4300 done = MSGLOOP_TERMINATED; 4301 break; 4302 case MSG_MESSAGE_REJECT: 4303 response = ahd_handle_msg_reject(ahd, devinfo); 4304 /* FALLTHROUGH */ 4305 case MSG_NOOP: 4306 done = MSGLOOP_MSGCOMPLETE; 4307 break; 4308 case MSG_EXTENDED: 4309 { 4310 /* Wait for enough of the message to begin validation */ 4311 if (ahd->msgin_index < 2) 4312 break; 4313 switch (ahd->msgin_buf[2]) { 4314 case MSG_EXT_SDTR: 4315 { 4316 u_int period; 4317 u_int ppr_options; 4318 u_int offset; 4319 u_int saved_offset; 4320 4321 if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) { 4322 reject = TRUE; 4323 break; 4324 } 4325 4326 /* 4327 * Wait until we have both args before validating 4328 * and acting on this message. 4329 * 4330 * Add one to MSG_EXT_SDTR_LEN to account for 4331 * the extended message preamble. 4332 */ 4333 if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1)) 4334 break; 4335 4336 period = ahd->msgin_buf[3]; 4337 ppr_options = 0; 4338 saved_offset = offset = ahd->msgin_buf[4]; 4339 ahd_devlimited_syncrate(ahd, tinfo, &period, 4340 &ppr_options, devinfo->role); 4341 ahd_validate_offset(ahd, tinfo, period, &offset, 4342 tinfo->curr.width, devinfo->role); 4343 if (bootverbose) { 4344 printf("(%s:%c:%d:%d): Received " 4345 "SDTR period %x, offset %x\n\t" 4346 "Filtered to period %x, offset %x\n", 4347 ahd_name(ahd), devinfo->channel, 4348 devinfo->target, devinfo->lun, 4349 ahd->msgin_buf[3], saved_offset, 4350 period, offset); 4351 } 4352 ahd_set_syncrate(ahd, devinfo, period, 4353 offset, ppr_options, 4354 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4355 /*paused*/TRUE); 4356 4357 /* 4358 * See if we initiated Sync Negotiation 4359 * and didn't have to fall down to async 4360 * transfers. 4361 */ 4362 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, TRUE)) { 4363 /* We started it */ 4364 if (saved_offset != offset) { 4365 /* Went too low - force async */ 4366 reject = TRUE; 4367 } 4368 } else { 4369 /* 4370 * Send our own SDTR in reply 4371 */ 4372 if (bootverbose 4373 && devinfo->role == ROLE_INITIATOR) { 4374 printf("(%s:%c:%d:%d): Target " 4375 "Initiated SDTR\n", 4376 ahd_name(ahd), devinfo->channel, 4377 devinfo->target, devinfo->lun); 4378 } 4379 ahd->msgout_index = 0; 4380 ahd->msgout_len = 0; 4381 ahd_construct_sdtr(ahd, devinfo, 4382 period, offset); 4383 ahd->msgout_index = 0; 4384 response = TRUE; 4385 } 4386 done = MSGLOOP_MSGCOMPLETE; 4387 break; 4388 } 4389 case MSG_EXT_WDTR: 4390 { 4391 u_int bus_width; 4392 u_int saved_width; 4393 u_int sending_reply; 4394 4395 sending_reply = FALSE; 4396 if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) { 4397 reject = TRUE; 4398 break; 4399 } 4400 4401 /* 4402 * Wait until we have our arg before validating 4403 * and acting on this message. 4404 * 4405 * Add one to MSG_EXT_WDTR_LEN to account for 4406 * the extended message preamble. 4407 */ 4408 if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1)) 4409 break; 4410 4411 bus_width = ahd->msgin_buf[3]; 4412 saved_width = bus_width; 4413 ahd_validate_width(ahd, tinfo, &bus_width, 4414 devinfo->role); 4415 if (bootverbose) { 4416 printf("(%s:%c:%d:%d): Received WDTR " 4417 "%x filtered to %x\n", 4418 ahd_name(ahd), devinfo->channel, 4419 devinfo->target, devinfo->lun, 4420 saved_width, bus_width); 4421 } 4422 4423 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, TRUE)) { 4424 /* 4425 * Don't send a WDTR back to the 4426 * target, since we asked first. 4427 * If the width went higher than our 4428 * request, reject it. 4429 */ 4430 if (saved_width > bus_width) { 4431 reject = TRUE; 4432 printf("(%s:%c:%d:%d): requested %dBit " 4433 "transfers. Rejecting...\n", 4434 ahd_name(ahd), devinfo->channel, 4435 devinfo->target, devinfo->lun, 4436 8 * (0x01 << bus_width)); 4437 bus_width = 0; 4438 } 4439 } else { 4440 /* 4441 * Send our own WDTR in reply 4442 */ 4443 if (bootverbose 4444 && devinfo->role == ROLE_INITIATOR) { 4445 printf("(%s:%c:%d:%d): Target " 4446 "Initiated WDTR\n", 4447 ahd_name(ahd), devinfo->channel, 4448 devinfo->target, devinfo->lun); 4449 } 4450 ahd->msgout_index = 0; 4451 ahd->msgout_len = 0; 4452 ahd_construct_wdtr(ahd, devinfo, bus_width); 4453 ahd->msgout_index = 0; 4454 response = TRUE; 4455 sending_reply = TRUE; 4456 } 4457 /* 4458 * After a wide message, we are async, but 4459 * some devices don't seem to honor this portion 4460 * of the spec. Force a renegotiation of the 4461 * sync component of our transfer agreement even 4462 * if our goal is async. By updating our width 4463 * after forcing the negotiation, we avoid 4464 * renegotiating for width. 4465 */ 4466 ahd_update_neg_request(ahd, devinfo, tstate, 4467 tinfo, AHD_NEG_ALWAYS); 4468 ahd_set_width(ahd, devinfo, bus_width, 4469 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4470 /*paused*/TRUE); 4471 if (sending_reply == FALSE && reject == FALSE) { 4472 /* 4473 * We will always have an SDTR to send. 4474 */ 4475 ahd->msgout_index = 0; 4476 ahd->msgout_len = 0; 4477 ahd_build_transfer_msg(ahd, devinfo); 4478 ahd->msgout_index = 0; 4479 response = TRUE; 4480 } 4481 done = MSGLOOP_MSGCOMPLETE; 4482 break; 4483 } 4484 case MSG_EXT_PPR: 4485 { 4486 u_int period; 4487 u_int offset; 4488 u_int bus_width; 4489 u_int ppr_options; 4490 u_int saved_width; 4491 u_int saved_offset; 4492 u_int saved_ppr_options; 4493 4494 if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) { 4495 reject = TRUE; 4496 break; 4497 } 4498 4499 /* 4500 * Wait until we have all args before validating 4501 * and acting on this message. 4502 * 4503 * Add one to MSG_EXT_PPR_LEN to account for 4504 * the extended message preamble. 4505 */ 4506 if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1)) 4507 break; 4508 4509 period = ahd->msgin_buf[3]; 4510 offset = ahd->msgin_buf[5]; 4511 bus_width = ahd->msgin_buf[6]; 4512 saved_width = bus_width; 4513 ppr_options = ahd->msgin_buf[7]; 4514 /* 4515 * According to the spec, a DT only 4516 * period factor with no DT option 4517 * set implies async. 4518 */ 4519 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0 4520 && period <= 9) 4521 offset = 0; 4522 saved_ppr_options = ppr_options; 4523 saved_offset = offset; 4524 4525 /* 4526 * Transfer options are only available if we 4527 * are negotiating wide. 4528 */ 4529 if (bus_width == 0) 4530 ppr_options &= MSG_EXT_PPR_QAS_REQ; 4531 4532 ahd_validate_width(ahd, tinfo, &bus_width, 4533 devinfo->role); 4534 ahd_devlimited_syncrate(ahd, tinfo, &period, 4535 &ppr_options, devinfo->role); 4536 ahd_validate_offset(ahd, tinfo, period, &offset, 4537 bus_width, devinfo->role); 4538 4539 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, TRUE)) { 4540 /* 4541 * If we are unable to do any of the 4542 * requested options (we went too low), 4543 * then we'll have to reject the message. 4544 */ 4545 if (saved_width > bus_width 4546 || saved_offset != offset 4547 || saved_ppr_options != ppr_options) { 4548 reject = TRUE; 4549 period = 0; 4550 offset = 0; 4551 bus_width = 0; 4552 ppr_options = 0; 4553 } 4554 } else { 4555 if (devinfo->role != ROLE_TARGET) 4556 printf("(%s:%c:%d:%d): Target " 4557 "Initiated PPR\n", 4558 ahd_name(ahd), devinfo->channel, 4559 devinfo->target, devinfo->lun); 4560 else 4561 printf("(%s:%c:%d:%d): Initiator " 4562 "Initiated PPR\n", 4563 ahd_name(ahd), devinfo->channel, 4564 devinfo->target, devinfo->lun); 4565 ahd->msgout_index = 0; 4566 ahd->msgout_len = 0; 4567 ahd_construct_ppr(ahd, devinfo, period, offset, 4568 bus_width, ppr_options); 4569 ahd->msgout_index = 0; 4570 response = TRUE; 4571 } 4572 if (bootverbose) { 4573 printf("(%s:%c:%d:%d): Received PPR width %x, " 4574 "period %x, offset %x,options %x\n" 4575 "\tFiltered to width %x, period %x, " 4576 "offset %x, options %x\n", 4577 ahd_name(ahd), devinfo->channel, 4578 devinfo->target, devinfo->lun, 4579 saved_width, ahd->msgin_buf[3], 4580 saved_offset, saved_ppr_options, 4581 bus_width, period, offset, ppr_options); 4582 } 4583 ahd_set_width(ahd, devinfo, bus_width, 4584 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4585 /*paused*/TRUE); 4586 ahd_set_syncrate(ahd, devinfo, period, 4587 offset, ppr_options, 4588 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4589 /*paused*/TRUE); 4590 4591 done = MSGLOOP_MSGCOMPLETE; 4592 break; 4593 } 4594 default: 4595 /* Unknown extended message. Reject it. */ 4596 reject = TRUE; 4597 break; 4598 } 4599 break; 4600 } 4601 #ifdef AHD_TARGET_MODE 4602 case MSG_BUS_DEV_RESET: 4603 ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD, 4604 CAM_BDR_SENT, 4605 "Bus Device Reset Received", 4606 /*verbose_level*/0); 4607 ahd_restart(ahd); 4608 done = MSGLOOP_TERMINATED; 4609 break; 4610 case MSG_ABORT_TAG: 4611 case MSG_ABORT: 4612 case MSG_CLEAR_QUEUE: 4613 { 4614 int tag; 4615 4616 /* Target mode messages */ 4617 if (devinfo->role != ROLE_TARGET) { 4618 reject = TRUE; 4619 break; 4620 } 4621 tag = SCB_LIST_NULL; 4622 if (ahd->msgin_buf[0] == MSG_ABORT_TAG) 4623 tag = ahd_inb(ahd, INITIATOR_TAG); 4624 ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 4625 devinfo->lun, tag, ROLE_TARGET, 4626 CAM_REQ_ABORTED); 4627 4628 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 4629 if (tstate != NULL) { 4630 struct ahd_tmode_lstate* lstate; 4631 4632 lstate = tstate->enabled_luns[devinfo->lun]; 4633 if (lstate != NULL) { 4634 ahd_queue_lstate_event(ahd, lstate, 4635 devinfo->our_scsiid, 4636 ahd->msgin_buf[0], 4637 /*arg*/tag); 4638 ahd_send_lstate_events(ahd, lstate); 4639 } 4640 } 4641 ahd_restart(ahd); 4642 done = MSGLOOP_TERMINATED; 4643 break; 4644 } 4645 #endif 4646 case MSG_QAS_REQUEST: 4647 #ifdef AHD_DEBUG 4648 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4649 printf("%s: QAS request. SCSISIGI == 0x%x\n", 4650 ahd_name(ahd), ahd_inb(ahd, SCSISIGI)); 4651 #endif 4652 ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE; 4653 /* FALLTHROUGH */ 4654 case MSG_TERM_IO_PROC: 4655 default: 4656 reject = TRUE; 4657 break; 4658 } 4659 4660 if (reject) { 4661 /* 4662 * Setup to reject the message. 4663 */ 4664 ahd->msgout_index = 0; 4665 ahd->msgout_len = 1; 4666 ahd->msgout_buf[0] = MSG_MESSAGE_REJECT; 4667 done = MSGLOOP_MSGCOMPLETE; 4668 response = TRUE; 4669 } 4670 4671 if (done != MSGLOOP_IN_PROG && !response) 4672 /* Clear the outgoing message buffer */ 4673 ahd->msgout_len = 0; 4674 4675 return (done); 4676 } 4677 4678 /* 4679 * Process a message reject message. 4680 */ 4681 static int 4682 ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4683 { 4684 /* 4685 * What we care about here is if we had an 4686 * outstanding SDTR or WDTR message for this 4687 * target. If we did, this is a signal that 4688 * the target is refusing negotiation. 4689 */ 4690 struct scb *scb; 4691 struct ahd_initiator_tinfo *tinfo; 4692 struct ahd_tmode_tstate *tstate; 4693 u_int scb_index; 4694 u_int last_msg; 4695 int response = 0; 4696 4697 scb_index = ahd_get_scbptr(ahd); 4698 scb = ahd_lookup_scb(ahd, scb_index); 4699 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, 4700 devinfo->our_scsiid, 4701 devinfo->target, &tstate); 4702 /* Might be necessary */ 4703 last_msg = ahd_inb(ahd, LAST_MSG); 4704 4705 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) { 4706 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/TRUE) 4707 && tinfo->goal.period <= AHD_SYNCRATE_PACED) { 4708 /* 4709 * Target may not like our SPI-4 PPR Options. 4710 * Attempt to negotiate 80MHz which will turn 4711 * off these options. 4712 */ 4713 if (bootverbose) { 4714 printf("(%s:%c:%d:%d): PPR Rejected. " 4715 "Trying simple U160 PPR\n", 4716 ahd_name(ahd), devinfo->channel, 4717 devinfo->target, devinfo->lun); 4718 } 4719 tinfo->goal.period = AHD_SYNCRATE_DT; 4720 tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ 4721 | MSG_EXT_PPR_QAS_REQ 4722 | MSG_EXT_PPR_DT_REQ; 4723 } else { 4724 /* 4725 * Target does not support the PPR message. 4726 * Attempt to negotiate SPI-2 style. 4727 */ 4728 if (bootverbose) { 4729 printf("(%s:%c:%d:%d): PPR Rejected. " 4730 "Trying WDTR/SDTR\n", 4731 ahd_name(ahd), devinfo->channel, 4732 devinfo->target, devinfo->lun); 4733 } 4734 tinfo->goal.ppr_options = 0; 4735 tinfo->curr.transport_version = 2; 4736 tinfo->goal.transport_version = 2; 4737 } 4738 ahd->msgout_index = 0; 4739 ahd->msgout_len = 0; 4740 ahd_build_transfer_msg(ahd, devinfo); 4741 ahd->msgout_index = 0; 4742 response = 1; 4743 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) { 4744 /* note 8bit xfers */ 4745 printf("(%s:%c:%d:%d): refuses WIDE negotiation. Using " 4746 "8bit transfers\n", ahd_name(ahd), 4747 devinfo->channel, devinfo->target, devinfo->lun); 4748 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 4749 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4750 /*paused*/TRUE); 4751 /* 4752 * No need to clear the sync rate. If the target 4753 * did not accept the command, our syncrate is 4754 * unaffected. If the target started the negotiation, 4755 * but rejected our response, we already cleared the 4756 * sync rate before sending our WDTR. 4757 */ 4758 if (tinfo->goal.offset != tinfo->curr.offset) { 4759 /* Start the sync negotiation */ 4760 ahd->msgout_index = 0; 4761 ahd->msgout_len = 0; 4762 ahd_build_transfer_msg(ahd, devinfo); 4763 ahd->msgout_index = 0; 4764 response = 1; 4765 } 4766 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) { 4767 /* note asynch xfers and clear flag */ 4768 ahd_set_syncrate(ahd, devinfo, /*period*/0, 4769 /*offset*/0, /*ppr_options*/0, 4770 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4771 /*paused*/TRUE); 4772 printf("(%s:%c:%d:%d): refuses synchronous negotiation. " 4773 "Using asynchronous transfers\n", 4774 ahd_name(ahd), devinfo->channel, 4775 devinfo->target, devinfo->lun); 4776 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) { 4777 int tag_type; 4778 int mask; 4779 4780 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK); 4781 4782 if (tag_type == MSG_SIMPLE_TASK) { 4783 printf("(%s:%c:%d:%d): refuses tagged commands. " 4784 "Performing non-tagged I/O\n", ahd_name(ahd), 4785 devinfo->channel, devinfo->target, devinfo->lun); 4786 ahd_set_tags(ahd, devinfo, AHD_QUEUE_NONE); 4787 mask = ~0x23; 4788 } else { 4789 printf("(%s:%c:%d:%d): refuses %s tagged commands. " 4790 "Performing simple queue tagged I/O only\n", 4791 ahd_name(ahd), devinfo->channel, devinfo->target, 4792 devinfo->lun, tag_type == MSG_ORDERED_TASK 4793 ? "ordered" : "head of queue"); 4794 ahd_set_tags(ahd, devinfo, AHD_QUEUE_BASIC); 4795 mask = ~0x03; 4796 } 4797 4798 /* 4799 * Resend the identify for this CCB as the target 4800 * may believe that the selection is invalid otherwise. 4801 */ 4802 ahd_outb(ahd, SCB_CONTROL, 4803 ahd_inb_scbram(ahd, SCB_CONTROL) & mask); 4804 scb->hscb->control &= mask; 4805 aic_set_transaction_tag(scb, /*enabled*/FALSE, 4806 /*type*/MSG_SIMPLE_TASK); 4807 ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG); 4808 ahd_assert_atn(ahd); 4809 ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun), 4810 SCB_GET_TAG(scb)); 4811 4812 /* 4813 * Requeue all tagged commands for this target 4814 * currently in our possession so they can be 4815 * converted to untagged commands. 4816 */ 4817 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 4818 SCB_GET_CHANNEL(ahd, scb), 4819 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL, 4820 ROLE_INITIATOR, CAM_REQUEUE_REQ, 4821 SEARCH_COMPLETE); 4822 } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) { 4823 /* 4824 * Most likely the device believes that we had 4825 * previously negotiated packetized. 4826 */ 4827 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 4828 | MSG_FLAG_IU_REQ_CHANGED; 4829 4830 ahd_force_renegotiation(ahd, devinfo); 4831 ahd->msgout_index = 0; 4832 ahd->msgout_len = 0; 4833 ahd_build_transfer_msg(ahd, devinfo); 4834 ahd->msgout_index = 0; 4835 response = 1; 4836 } else { 4837 /* 4838 * Otherwise, we ignore it. 4839 */ 4840 printf("%s:%c:%d: Message reject for %x -- ignored\n", 4841 ahd_name(ahd), devinfo->channel, devinfo->target, 4842 last_msg); 4843 } 4844 return (response); 4845 } 4846 4847 /* 4848 * Process an ingnore wide residue message. 4849 */ 4850 static void 4851 ahd_handle_ign_wide_residue(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4852 { 4853 u_int scb_index; 4854 struct scb *scb; 4855 4856 scb_index = ahd_get_scbptr(ahd); 4857 scb = ahd_lookup_scb(ahd, scb_index); 4858 /* 4859 * XXX Actually check data direction in the sequencer? 4860 * Perhaps add datadir to some spare bits in the hscb? 4861 */ 4862 if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0 4863 || aic_get_transfer_dir(scb) != CAM_DIR_IN) { 4864 /* 4865 * Ignore the message if we haven't 4866 * seen an appropriate data phase yet. 4867 */ 4868 } else { 4869 /* 4870 * If the residual occurred on the last 4871 * transfer and the transfer request was 4872 * expected to end on an odd count, do 4873 * nothing. Otherwise, subtract a byte 4874 * and update the residual count accordingly. 4875 */ 4876 uint32_t sgptr; 4877 4878 sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR); 4879 if ((sgptr & SG_LIST_NULL) != 0 4880 && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 4881 & SCB_XFERLEN_ODD) != 0) { 4882 /* 4883 * If the residual occurred on the last 4884 * transfer and the transfer request was 4885 * expected to end on an odd count, do 4886 * nothing. 4887 */ 4888 } else { 4889 uint32_t data_cnt; 4890 uint32_t sglen; 4891 4892 /* Pull in the rest of the sgptr */ 4893 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 4894 data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT); 4895 if ((sgptr & SG_LIST_NULL) != 0) { 4896 /* 4897 * The residual data count is not updated 4898 * for the command run to completion case. 4899 * Explicitly zero the count. 4900 */ 4901 data_cnt &= ~AHD_SG_LEN_MASK; 4902 } 4903 data_cnt += 1; 4904 sgptr &= SG_PTR_MASK; 4905 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 4906 struct ahd_dma64_seg *sg; 4907 4908 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4909 4910 /* 4911 * The residual sg ptr points to the next S/G 4912 * to load so we must go back one. 4913 */ 4914 sg--; 4915 sglen = aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 4916 if (sg != scb->sg_list 4917 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4918 sg--; 4919 sglen = aic_le32toh(sg->len); 4920 /* 4921 * Preserve High Address and SG_LIST 4922 * bits while setting the count to 1. 4923 */ 4924 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4925 4926 /* 4927 * Increment sg so it points to the 4928 * "next" sg. 4929 */ 4930 sg++; 4931 sgptr = ahd_sg_virt_to_bus(ahd, scb, 4932 sg); 4933 } 4934 } else { 4935 struct ahd_dma_seg *sg; 4936 4937 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4938 4939 /* 4940 * The residual sg ptr points to the next S/G 4941 * to load so we must go back one. 4942 */ 4943 sg--; 4944 sglen = aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 4945 if (sg != scb->sg_list 4946 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4947 sg--; 4948 sglen = aic_le32toh(sg->len); 4949 /* 4950 * Preserve High Address and SG_LIST 4951 * bits while setting the count to 1. 4952 */ 4953 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4954 4955 /* 4956 * Increment sg so it points to the 4957 * "next" sg. 4958 */ 4959 sg++; 4960 sgptr = ahd_sg_virt_to_bus(ahd, scb, 4961 sg); 4962 } 4963 } 4964 /* 4965 * Toggle the "oddness" of the transfer length 4966 * to handle this mid-transfer ignore wide 4967 * residue. This ensures that the oddness is 4968 * correct for subsequent data transfers. 4969 */ 4970 ahd_outb(ahd, SCB_TASK_ATTRIBUTE, 4971 ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 4972 ^ SCB_XFERLEN_ODD); 4973 4974 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 4975 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt); 4976 /* 4977 * The FIFO's pointers will be updated if/when the 4978 * sequencer re-enters a data phase. 4979 */ 4980 } 4981 } 4982 } 4983 4984 /* 4985 * Reinitialize the data pointers for the active transfer 4986 * based on its current residual. 4987 */ 4988 static void 4989 ahd_reinitialize_dataptrs(struct ahd_softc *ahd) 4990 { 4991 struct scb *scb; 4992 ahd_mode_state saved_modes; 4993 u_int scb_index; 4994 u_int wait; 4995 uint32_t sgptr; 4996 uint32_t resid; 4997 uint64_t dataptr; 4998 4999 AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK, 5000 AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK); 5001 5002 scb_index = ahd_get_scbptr(ahd); 5003 scb = ahd_lookup_scb(ahd, scb_index); 5004 5005 /* 5006 * Release and reacquire the FIFO so we 5007 * have a clean slate. 5008 */ 5009 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 5010 wait = 1000; 5011 while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE)) 5012 aic_delay(100); 5013 if (wait == 0) { 5014 ahd_print_path(ahd, scb); 5015 printf("ahd_reinitialize_dataptrs: Forcing FIFO free.\n"); 5016 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 5017 } 5018 saved_modes = ahd_save_modes(ahd); 5019 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5020 ahd_outb(ahd, DFFSTAT, 5021 ahd_inb(ahd, DFFSTAT) 5022 | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0)); 5023 5024 /* 5025 * Determine initial values for data_addr and data_cnt 5026 * for resuming the data phase. 5027 */ 5028 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 5029 sgptr &= SG_PTR_MASK; 5030 5031 resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16) 5032 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8) 5033 | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT); 5034 5035 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 5036 struct ahd_dma64_seg *sg; 5037 5038 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5039 5040 /* The residual sg_ptr always points to the next sg */ 5041 sg--; 5042 5043 dataptr = aic_le64toh(sg->addr) 5044 + (aic_le32toh(sg->len) & AHD_SG_LEN_MASK) 5045 - resid; 5046 ahd_outl(ahd, HADDR + 4, dataptr >> 32); 5047 } else { 5048 struct ahd_dma_seg *sg; 5049 5050 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5051 5052 /* The residual sg_ptr always points to the next sg */ 5053 sg--; 5054 5055 dataptr = aic_le32toh(sg->addr) 5056 + (aic_le32toh(sg->len) & AHD_SG_LEN_MASK) 5057 - resid; 5058 ahd_outb(ahd, HADDR + 4, 5059 (aic_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24); 5060 } 5061 ahd_outl(ahd, HADDR, dataptr); 5062 ahd_outb(ahd, HCNT + 2, resid >> 16); 5063 ahd_outb(ahd, HCNT + 1, resid >> 8); 5064 ahd_outb(ahd, HCNT, resid); 5065 } 5066 5067 /* 5068 * Handle the effects of issuing a bus device reset message. 5069 */ 5070 static void 5071 ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5072 u_int lun, cam_status status, char *message, 5073 int verbose_level) 5074 { 5075 #ifdef AHD_TARGET_MODE 5076 struct ahd_tmode_tstate* tstate; 5077 #endif 5078 int found; 5079 5080 found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 5081 lun, SCB_LIST_NULL, devinfo->role, 5082 status); 5083 5084 #ifdef AHD_TARGET_MODE 5085 /* 5086 * Send an immediate notify ccb to all target mord peripheral 5087 * drivers affected by this action. 5088 */ 5089 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 5090 if (tstate != NULL) { 5091 u_int cur_lun; 5092 u_int max_lun; 5093 5094 if (lun != CAM_LUN_WILDCARD) { 5095 cur_lun = 0; 5096 max_lun = AHD_NUM_LUNS - 1; 5097 } else { 5098 cur_lun = lun; 5099 max_lun = lun; 5100 } 5101 for (cur_lun <= max_lun; cur_lun++) { 5102 struct ahd_tmode_lstate* lstate; 5103 5104 lstate = tstate->enabled_luns[cur_lun]; 5105 if (lstate == NULL) 5106 continue; 5107 5108 ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid, 5109 MSG_BUS_DEV_RESET, /*arg*/0); 5110 ahd_send_lstate_events(ahd, lstate); 5111 } 5112 } 5113 #endif 5114 5115 /* 5116 * Go back to async/narrow transfers and renegotiate. 5117 */ 5118 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 5119 AHD_TRANS_CUR, /*paused*/TRUE); 5120 ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0, 5121 /*ppr_options*/0, AHD_TRANS_CUR, 5122 /*paused*/TRUE); 5123 5124 if (status != CAM_SEL_TIMEOUT) 5125 ahd_send_async(ahd, devinfo->channel, devinfo->target, 5126 lun, AC_SENT_BDR, NULL); 5127 5128 if (message != NULL 5129 && (verbose_level <= bootverbose)) { 5130 AHD_CORRECTABLE_ERROR(ahd); 5131 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd), 5132 message, devinfo->channel, devinfo->target, found); 5133 } 5134 } 5135 5136 #ifdef AHD_TARGET_MODE 5137 static void 5138 ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5139 struct scb *scb) 5140 { 5141 5142 /* 5143 * To facilitate adding multiple messages together, 5144 * each routine should increment the index and len 5145 * variables instead of setting them explicitly. 5146 */ 5147 ahd->msgout_index = 0; 5148 ahd->msgout_len = 0; 5149 5150 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0) 5151 ahd_build_transfer_msg(ahd, devinfo); 5152 else 5153 panic("ahd_intr: AWAITING target message with no message"); 5154 5155 ahd->msgout_index = 0; 5156 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 5157 } 5158 #endif 5159 /**************************** Initialization **********************************/ 5160 static u_int 5161 ahd_sglist_size(struct ahd_softc *ahd) 5162 { 5163 bus_size_t list_size; 5164 5165 list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG; 5166 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 5167 list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG; 5168 return (list_size); 5169 } 5170 5171 /* 5172 * Calculate the optimum S/G List allocation size. S/G elements used 5173 * for a given transaction must be physically contiguous. Assume the 5174 * OS will allocate full pages to us, so it doesn't make sense to request 5175 * less than a page. 5176 */ 5177 static u_int 5178 ahd_sglist_allocsize(struct ahd_softc *ahd) 5179 { 5180 bus_size_t sg_list_increment; 5181 bus_size_t sg_list_size; 5182 bus_size_t max_list_size; 5183 bus_size_t best_list_size; 5184 5185 /* Start out with the minimum required for AHD_NSEG. */ 5186 sg_list_increment = ahd_sglist_size(ahd); 5187 sg_list_size = sg_list_increment; 5188 5189 /* Get us as close as possible to a page in size. */ 5190 while ((sg_list_size + sg_list_increment) <= PAGE_SIZE) 5191 sg_list_size += sg_list_increment; 5192 5193 /* 5194 * Try to reduce the amount of wastage by allocating 5195 * multiple pages. 5196 */ 5197 best_list_size = sg_list_size; 5198 max_list_size = roundup(sg_list_increment, PAGE_SIZE); 5199 if (max_list_size < 4 * PAGE_SIZE) 5200 max_list_size = 4 * PAGE_SIZE; 5201 if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment)) 5202 max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment); 5203 while ((sg_list_size + sg_list_increment) <= max_list_size 5204 && (sg_list_size % PAGE_SIZE) != 0) { 5205 bus_size_t new_mod; 5206 bus_size_t best_mod; 5207 5208 sg_list_size += sg_list_increment; 5209 new_mod = sg_list_size % PAGE_SIZE; 5210 best_mod = best_list_size % PAGE_SIZE; 5211 if (new_mod > best_mod || new_mod == 0) { 5212 best_list_size = sg_list_size; 5213 } 5214 } 5215 return (best_list_size); 5216 } 5217 5218 /* 5219 * Allocate a controller structure for a new device 5220 * and perform initial initializion. 5221 */ 5222 struct ahd_softc * 5223 ahd_alloc(void *platform_arg, char *name) 5224 { 5225 struct ahd_softc *ahd; 5226 5227 #ifndef __FreeBSD__ 5228 ahd = malloc(sizeof(*ahd), M_DEVBUF, M_NOWAIT); 5229 if (!ahd) { 5230 printf("aic7xxx: cannot malloc softc!\n"); 5231 free(name, M_DEVBUF); 5232 return NULL; 5233 } 5234 #else 5235 ahd = device_get_softc((device_t)platform_arg); 5236 #endif 5237 memset(ahd, 0, sizeof(*ahd)); 5238 ahd->seep_config = malloc(sizeof(*ahd->seep_config), 5239 M_DEVBUF, M_NOWAIT); 5240 if (ahd->seep_config == NULL) { 5241 #ifndef __FreeBSD__ 5242 free(ahd, M_DEVBUF); 5243 #endif 5244 free(name, M_DEVBUF); 5245 return (NULL); 5246 } 5247 LIST_INIT(&ahd->pending_scbs); 5248 LIST_INIT(&ahd->timedout_scbs); 5249 /* We don't know our unit number until the OSM sets it */ 5250 ahd->name = name; 5251 ahd->unit = -1; 5252 ahd->description = NULL; 5253 ahd->bus_description = NULL; 5254 ahd->channel = 'A'; 5255 ahd->chip = AHD_NONE; 5256 ahd->features = AHD_FENONE; 5257 ahd->bugs = AHD_BUGNONE; 5258 ahd->flags = AHD_SPCHK_ENB_A|AHD_RESET_BUS_A|AHD_TERM_ENB_A 5259 | AHD_EXTENDED_TRANS_A|AHD_STPWLEVEL_A; 5260 aic_timer_init(&ahd->reset_timer); 5261 aic_timer_init(&ahd->stat_timer); 5262 ahd->int_coalescing_timer = AHD_INT_COALESCING_TIMER_DEFAULT; 5263 ahd->int_coalescing_maxcmds = AHD_INT_COALESCING_MAXCMDS_DEFAULT; 5264 ahd->int_coalescing_mincmds = AHD_INT_COALESCING_MINCMDS_DEFAULT; 5265 ahd->int_coalescing_threshold = AHD_INT_COALESCING_THRESHOLD_DEFAULT; 5266 ahd->int_coalescing_stop_threshold = 5267 AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT; 5268 5269 if (ahd_platform_alloc(ahd, platform_arg) != 0) { 5270 ahd_free(ahd); 5271 ahd = NULL; 5272 } 5273 ahd_lockinit(ahd); 5274 #ifdef AHD_DEBUG 5275 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) { 5276 printf("%s: scb size = 0x%x, hscb size = 0x%x\n", 5277 ahd_name(ahd), (u_int)sizeof(struct scb), 5278 (u_int)sizeof(struct hardware_scb)); 5279 } 5280 #endif 5281 return (ahd); 5282 } 5283 5284 int 5285 ahd_softc_init(struct ahd_softc *ahd) 5286 { 5287 5288 ahd->unpause = 0; 5289 ahd->pause = PAUSE; 5290 return (0); 5291 } 5292 5293 void 5294 ahd_softc_insert(struct ahd_softc *ahd) 5295 { 5296 struct ahd_softc *list_ahd; 5297 5298 #if AIC_PCI_CONFIG > 0 5299 /* 5300 * Second Function PCI devices need to inherit some 5301 * settings from function 0. 5302 */ 5303 if ((ahd->features & AHD_MULTI_FUNC) != 0) { 5304 TAILQ_FOREACH(list_ahd, &ahd_tailq, links) { 5305 aic_dev_softc_t list_pci; 5306 aic_dev_softc_t pci; 5307 5308 list_pci = list_ahd->dev_softc; 5309 pci = ahd->dev_softc; 5310 if (aic_get_pci_slot(list_pci) == aic_get_pci_slot(pci) 5311 && aic_get_pci_bus(list_pci) == aic_get_pci_bus(pci)) { 5312 struct ahd_softc *master; 5313 struct ahd_softc *slave; 5314 5315 if (aic_get_pci_function(list_pci) == 0) { 5316 master = list_ahd; 5317 slave = ahd; 5318 } else { 5319 master = ahd; 5320 slave = list_ahd; 5321 } 5322 slave->flags &= ~AHD_BIOS_ENABLED; 5323 slave->flags |= 5324 master->flags & AHD_BIOS_ENABLED; 5325 break; 5326 } 5327 } 5328 } 5329 #endif 5330 5331 /* 5332 * Insertion sort into our list of softcs. 5333 */ 5334 list_ahd = TAILQ_FIRST(&ahd_tailq); 5335 while (list_ahd != NULL 5336 && ahd_softc_comp(ahd, list_ahd) <= 0) 5337 list_ahd = TAILQ_NEXT(list_ahd, links); 5338 if (list_ahd != NULL) 5339 TAILQ_INSERT_BEFORE(list_ahd, ahd, links); 5340 else 5341 TAILQ_INSERT_TAIL(&ahd_tailq, ahd, links); 5342 ahd->init_level++; 5343 } 5344 5345 void 5346 ahd_set_unit(struct ahd_softc *ahd, int unit) 5347 { 5348 ahd->unit = unit; 5349 } 5350 5351 void 5352 ahd_set_name(struct ahd_softc *ahd, char *name) 5353 { 5354 if (ahd->name != NULL) 5355 free(ahd->name, M_DEVBUF); 5356 ahd->name = name; 5357 } 5358 5359 void 5360 ahd_free(struct ahd_softc *ahd) 5361 { 5362 int i; 5363 5364 ahd_terminate_recovery_thread(ahd); 5365 switch (ahd->init_level) { 5366 default: 5367 case 5: 5368 ahd_shutdown(ahd); 5369 /* FALLTHROUGH */ 5370 case 4: 5371 aic_dmamap_unload(ahd, ahd->shared_data_dmat, 5372 ahd->shared_data_map.dmamap); 5373 /* FALLTHROUGH */ 5374 case 3: 5375 aic_dmamem_free(ahd, ahd->shared_data_dmat, ahd->qoutfifo, 5376 ahd->shared_data_map.dmamap); 5377 /* FALLTHROUGH */ 5378 case 2: 5379 aic_dma_tag_destroy(ahd, ahd->shared_data_dmat); 5380 case 1: 5381 #ifndef __linux__ 5382 aic_dma_tag_destroy(ahd, ahd->buffer_dmat); 5383 #endif 5384 break; 5385 case 0: 5386 break; 5387 } 5388 5389 #ifndef __linux__ 5390 aic_dma_tag_destroy(ahd, ahd->parent_dmat); 5391 #endif 5392 ahd_platform_free(ahd); 5393 ahd_fini_scbdata(ahd); 5394 for (i = 0; i < AHD_NUM_TARGETS; i++) { 5395 struct ahd_tmode_tstate *tstate; 5396 5397 tstate = ahd->enabled_targets[i]; 5398 if (tstate != NULL) { 5399 #ifdef AHD_TARGET_MODE 5400 int j; 5401 5402 for (j = 0; j < AHD_NUM_LUNS; j++) { 5403 struct ahd_tmode_lstate *lstate; 5404 5405 lstate = tstate->enabled_luns[j]; 5406 if (lstate != NULL) { 5407 xpt_free_path(lstate->path); 5408 free(lstate, M_DEVBUF); 5409 } 5410 } 5411 #endif 5412 free(tstate, M_DEVBUF); 5413 } 5414 } 5415 #ifdef AHD_TARGET_MODE 5416 if (ahd->black_hole != NULL) { 5417 xpt_free_path(ahd->black_hole->path); 5418 free(ahd->black_hole, M_DEVBUF); 5419 } 5420 #endif 5421 if (ahd->name != NULL) 5422 free(ahd->name, M_DEVBUF); 5423 if (ahd->seep_config != NULL) 5424 free(ahd->seep_config, M_DEVBUF); 5425 if (ahd->saved_stack != NULL) 5426 free(ahd->saved_stack, M_DEVBUF); 5427 #ifndef __FreeBSD__ 5428 free(ahd, M_DEVBUF); 5429 #endif 5430 return; 5431 } 5432 5433 void 5434 ahd_shutdown(void *arg) 5435 { 5436 struct ahd_softc *ahd; 5437 5438 ahd = (struct ahd_softc *)arg; 5439 5440 /* 5441 * Stop periodic timer callbacks. 5442 */ 5443 aic_timer_stop(&ahd->reset_timer); 5444 aic_timer_stop(&ahd->stat_timer); 5445 5446 /* This will reset most registers to 0, but not all */ 5447 ahd_reset(ahd, /*reinit*/FALSE); 5448 } 5449 5450 /* 5451 * Reset the controller and record some information about it 5452 * that is only available just after a reset. If "reinit" is 5453 * non-zero, this reset occurred after initial configuration 5454 * and the caller requests that the chip be fully reinitialized 5455 * to a runable state. Chip interrupts are *not* enabled after 5456 * a reinitialization. The caller must enable interrupts via 5457 * ahd_intr_enable(). 5458 */ 5459 int 5460 ahd_reset(struct ahd_softc *ahd, int reinit) 5461 { 5462 u_int sxfrctl1; 5463 int wait; 5464 uint32_t cmd; 5465 5466 /* 5467 * Preserve the value of the SXFRCTL1 register for all channels. 5468 * It contains settings that affect termination and we don't want 5469 * to disturb the integrity of the bus. 5470 */ 5471 ahd_pause(ahd); 5472 ahd_update_modes(ahd); 5473 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5474 sxfrctl1 = ahd_inb(ahd, SXFRCTL1); 5475 5476 cmd = aic_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2); 5477 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5478 uint32_t mod_cmd; 5479 5480 /* 5481 * A4 Razor #632 5482 * During the assertion of CHIPRST, the chip 5483 * does not disable its parity logic prior to 5484 * the start of the reset. This may cause a 5485 * parity error to be detected and thus a 5486 * spurious SERR or PERR assertion. Disable 5487 * PERR and SERR responses during the CHIPRST. 5488 */ 5489 mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN); 5490 aic_pci_write_config(ahd->dev_softc, PCIR_COMMAND, 5491 mod_cmd, /*bytes*/2); 5492 } 5493 ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause); 5494 5495 /* 5496 * Ensure that the reset has finished. We delay 1000us 5497 * prior to reading the register to make sure the chip 5498 * has sufficiently completed its reset to handle register 5499 * accesses. 5500 */ 5501 wait = 1000; 5502 do { 5503 aic_delay(1000); 5504 } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK)); 5505 5506 if (wait == 0) { 5507 printf("%s: WARNING - Failed chip reset! " 5508 "Trying to initialize anyway.\n", ahd_name(ahd)); 5509 AHD_FATAL_ERROR(ahd); 5510 } 5511 ahd_outb(ahd, HCNTRL, ahd->pause); 5512 5513 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5514 /* 5515 * Clear any latched PCI error status and restore 5516 * previous SERR and PERR response enables. 5517 */ 5518 aic_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1, 5519 0xFF, /*bytes*/1); 5520 aic_pci_write_config(ahd->dev_softc, PCIR_COMMAND, 5521 cmd, /*bytes*/2); 5522 } 5523 5524 /* 5525 * Mode should be SCSI after a chip reset, but lets 5526 * set it just to be safe. We touch the MODE_PTR 5527 * register directly so as to bypass the lazy update 5528 * code in ahd_set_modes(). 5529 */ 5530 ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5531 ahd_outb(ahd, MODE_PTR, 5532 ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI)); 5533 5534 /* 5535 * Restore SXFRCTL1. 5536 * 5537 * We must always initialize STPWEN to 1 before we 5538 * restore the saved values. STPWEN is initialized 5539 * to a tri-state condition which can only be cleared 5540 * by turning it on. 5541 */ 5542 ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN); 5543 ahd_outb(ahd, SXFRCTL1, sxfrctl1); 5544 5545 /* Determine chip configuration */ 5546 ahd->features &= ~AHD_WIDE; 5547 if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0) 5548 ahd->features |= AHD_WIDE; 5549 5550 /* 5551 * If a recovery action has forced a chip reset, 5552 * re-initialize the chip to our liking. 5553 */ 5554 if (reinit != 0) 5555 ahd_chip_init(ahd); 5556 5557 return (0); 5558 } 5559 5560 /* 5561 * Determine the number of SCBs available on the controller 5562 */ 5563 int 5564 ahd_probe_scbs(struct ahd_softc *ahd) { 5565 int i; 5566 5567 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 5568 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 5569 for (i = 0; i < AHD_SCB_MAX; i++) { 5570 int j; 5571 5572 ahd_set_scbptr(ahd, i); 5573 ahd_outw(ahd, SCB_BASE, i); 5574 for (j = 2; j < 64; j++) 5575 ahd_outb(ahd, SCB_BASE+j, 0); 5576 /* Start out life as unallocated (needing an abort) */ 5577 ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE); 5578 if (ahd_inw_scbram(ahd, SCB_BASE) != i) 5579 break; 5580 ahd_set_scbptr(ahd, 0); 5581 if (ahd_inw_scbram(ahd, SCB_BASE) != 0) 5582 break; 5583 } 5584 return (i); 5585 } 5586 5587 static void 5588 ahd_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 5589 { 5590 bus_addr_t *baddr; 5591 5592 baddr = (bus_addr_t *)arg; 5593 *baddr = segs->ds_addr; 5594 } 5595 5596 static void 5597 ahd_initialize_hscbs(struct ahd_softc *ahd) 5598 { 5599 int i; 5600 5601 for (i = 0; i < ahd->scb_data.maxhscbs; i++) { 5602 ahd_set_scbptr(ahd, i); 5603 5604 /* Clear the control byte. */ 5605 ahd_outb(ahd, SCB_CONTROL, 0); 5606 5607 /* Set the next pointer */ 5608 ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL); 5609 } 5610 } 5611 5612 static int 5613 ahd_init_scbdata(struct ahd_softc *ahd) 5614 { 5615 struct scb_data *scb_data; 5616 int i; 5617 5618 scb_data = &ahd->scb_data; 5619 TAILQ_INIT(&scb_data->free_scbs); 5620 for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++) 5621 LIST_INIT(&scb_data->free_scb_lists[i]); 5622 LIST_INIT(&scb_data->any_dev_free_scb_list); 5623 SLIST_INIT(&scb_data->hscb_maps); 5624 SLIST_INIT(&scb_data->sg_maps); 5625 SLIST_INIT(&scb_data->sense_maps); 5626 5627 /* Determine the number of hardware SCBs and initialize them */ 5628 scb_data->maxhscbs = ahd_probe_scbs(ahd); 5629 if (scb_data->maxhscbs == 0) { 5630 printf("%s: No SCB space found\n", ahd_name(ahd)); 5631 AHD_FATAL_ERROR(ahd); 5632 return (ENXIO); 5633 } 5634 5635 ahd_initialize_hscbs(ahd); 5636 5637 /* 5638 * Create our DMA tags. These tags define the kinds of device 5639 * accessible memory allocations and memory mappings we will 5640 * need to perform during normal operation. 5641 * 5642 * Unless we need to further restrict the allocation, we rely 5643 * on the restrictions of the parent dmat, hence the common 5644 * use of MAXADDR and MAXSIZE. 5645 */ 5646 5647 /* DMA tag for our hardware scb structures */ 5648 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 5649 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5650 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5651 /*highaddr*/BUS_SPACE_MAXADDR, 5652 /*filter*/NULL, /*filterarg*/NULL, 5653 PAGE_SIZE, /*nsegments*/1, 5654 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5655 /*flags*/0, &scb_data->hscb_dmat) != 0) { 5656 goto error_exit; 5657 } 5658 5659 scb_data->init_level++; 5660 5661 /* DMA tag for our S/G structures. */ 5662 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/8, 5663 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5664 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5665 /*highaddr*/BUS_SPACE_MAXADDR, 5666 /*filter*/NULL, /*filterarg*/NULL, 5667 ahd_sglist_allocsize(ahd), /*nsegments*/1, 5668 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5669 /*flags*/0, &scb_data->sg_dmat) != 0) { 5670 goto error_exit; 5671 } 5672 #ifdef AHD_DEBUG 5673 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) 5674 printf("%s: ahd_sglist_allocsize = 0x%x\n", ahd_name(ahd), 5675 ahd_sglist_allocsize(ahd)); 5676 #endif 5677 5678 scb_data->init_level++; 5679 5680 /* DMA tag for our sense buffers. We allocate in page sized chunks */ 5681 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 5682 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5683 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5684 /*highaddr*/BUS_SPACE_MAXADDR, 5685 /*filter*/NULL, /*filterarg*/NULL, 5686 PAGE_SIZE, /*nsegments*/1, 5687 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5688 /*flags*/0, &scb_data->sense_dmat) != 0) { 5689 goto error_exit; 5690 } 5691 5692 scb_data->init_level++; 5693 5694 /* Perform initial CCB allocation */ 5695 while (ahd_alloc_scbs(ahd) != 0) 5696 ; 5697 5698 if (scb_data->numscbs == 0) { 5699 printf("%s: ahd_init_scbdata - " 5700 "Unable to allocate initial scbs\n", 5701 ahd_name(ahd)); 5702 goto error_exit; 5703 } 5704 5705 /* 5706 * Note that we were successful 5707 */ 5708 return (0); 5709 5710 error_exit: 5711 5712 return (ENOMEM); 5713 } 5714 5715 static struct scb * 5716 ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag) 5717 { 5718 struct scb *scb; 5719 5720 /* 5721 * Look on the pending list. 5722 */ 5723 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 5724 if (SCB_GET_TAG(scb) == tag) 5725 return (scb); 5726 } 5727 5728 /* 5729 * Then on all of the collision free lists. 5730 */ 5731 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5732 struct scb *list_scb; 5733 5734 list_scb = scb; 5735 do { 5736 if (SCB_GET_TAG(list_scb) == tag) 5737 return (list_scb); 5738 list_scb = LIST_NEXT(list_scb, collision_links); 5739 } while (list_scb); 5740 } 5741 5742 /* 5743 * And finally on the generic free list. 5744 */ 5745 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 5746 if (SCB_GET_TAG(scb) == tag) 5747 return (scb); 5748 } 5749 5750 return (NULL); 5751 } 5752 5753 static void 5754 ahd_fini_scbdata(struct ahd_softc *ahd) 5755 { 5756 struct scb_data *scb_data; 5757 5758 scb_data = &ahd->scb_data; 5759 if (scb_data == NULL) 5760 return; 5761 5762 switch (scb_data->init_level) { 5763 default: 5764 case 7: 5765 { 5766 struct map_node *sns_map; 5767 5768 while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) { 5769 SLIST_REMOVE_HEAD(&scb_data->sense_maps, links); 5770 aic_dmamap_unload(ahd, scb_data->sense_dmat, 5771 sns_map->dmamap); 5772 aic_dmamem_free(ahd, scb_data->sense_dmat, 5773 sns_map->vaddr, sns_map->dmamap); 5774 free(sns_map, M_DEVBUF); 5775 } 5776 aic_dma_tag_destroy(ahd, scb_data->sense_dmat); 5777 /* FALLTHROUGH */ 5778 } 5779 case 6: 5780 { 5781 struct map_node *sg_map; 5782 5783 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) { 5784 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links); 5785 aic_dmamap_unload(ahd, scb_data->sg_dmat, 5786 sg_map->dmamap); 5787 aic_dmamem_free(ahd, scb_data->sg_dmat, 5788 sg_map->vaddr, sg_map->dmamap); 5789 free(sg_map, M_DEVBUF); 5790 } 5791 aic_dma_tag_destroy(ahd, scb_data->sg_dmat); 5792 /* FALLTHROUGH */ 5793 } 5794 case 5: 5795 { 5796 struct map_node *hscb_map; 5797 5798 while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) { 5799 SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links); 5800 aic_dmamap_unload(ahd, scb_data->hscb_dmat, 5801 hscb_map->dmamap); 5802 aic_dmamem_free(ahd, scb_data->hscb_dmat, 5803 hscb_map->vaddr, hscb_map->dmamap); 5804 free(hscb_map, M_DEVBUF); 5805 } 5806 aic_dma_tag_destroy(ahd, scb_data->hscb_dmat); 5807 /* FALLTHROUGH */ 5808 } 5809 case 4: 5810 case 3: 5811 case 2: 5812 case 1: 5813 case 0: 5814 break; 5815 } 5816 } 5817 5818 /* 5819 * DSP filter Bypass must be enabled until the first selection 5820 * after a change in bus mode (Razor #491 and #493). 5821 */ 5822 static void 5823 ahd_setup_iocell_workaround(struct ahd_softc *ahd) 5824 { 5825 ahd_mode_state saved_modes; 5826 5827 saved_modes = ahd_save_modes(ahd); 5828 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5829 ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL) 5830 | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS); 5831 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI)); 5832 #ifdef AHD_DEBUG 5833 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5834 printf("%s: Setting up iocell workaround\n", ahd_name(ahd)); 5835 #endif 5836 ahd_restore_modes(ahd, saved_modes); 5837 ahd->flags &= ~AHD_HAD_FIRST_SEL; 5838 } 5839 5840 static void 5841 ahd_iocell_first_selection(struct ahd_softc *ahd) 5842 { 5843 ahd_mode_state saved_modes; 5844 u_int sblkctl; 5845 5846 if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0) 5847 return; 5848 saved_modes = ahd_save_modes(ahd); 5849 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5850 sblkctl = ahd_inb(ahd, SBLKCTL); 5851 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5852 #ifdef AHD_DEBUG 5853 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5854 printf("%s: iocell first selection\n", ahd_name(ahd)); 5855 #endif 5856 if ((sblkctl & ENAB40) != 0) { 5857 ahd_outb(ahd, DSPDATACTL, 5858 ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB); 5859 #ifdef AHD_DEBUG 5860 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5861 printf("%s: BYPASS now disabled\n", ahd_name(ahd)); 5862 #endif 5863 } 5864 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI)); 5865 ahd_outb(ahd, CLRINT, CLRSCSIINT); 5866 ahd_restore_modes(ahd, saved_modes); 5867 ahd->flags |= AHD_HAD_FIRST_SEL; 5868 } 5869 5870 /*************************** SCB Management ***********************************/ 5871 static void 5872 ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx) 5873 { 5874 struct scb_list *free_list; 5875 struct scb_tailq *free_tailq; 5876 struct scb *first_scb; 5877 5878 scb->flags |= SCB_ON_COL_LIST; 5879 AHD_SET_SCB_COL_IDX(scb, col_idx); 5880 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5881 free_tailq = &ahd->scb_data.free_scbs; 5882 first_scb = LIST_FIRST(free_list); 5883 if (first_scb != NULL) { 5884 LIST_INSERT_AFTER(first_scb, scb, collision_links); 5885 } else { 5886 LIST_INSERT_HEAD(free_list, scb, collision_links); 5887 TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe); 5888 } 5889 } 5890 5891 static void 5892 ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb) 5893 { 5894 struct scb_list *free_list; 5895 struct scb_tailq *free_tailq; 5896 struct scb *first_scb; 5897 u_int col_idx; 5898 5899 scb->flags &= ~SCB_ON_COL_LIST; 5900 col_idx = AHD_GET_SCB_COL_IDX(ahd, scb); 5901 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5902 free_tailq = &ahd->scb_data.free_scbs; 5903 first_scb = LIST_FIRST(free_list); 5904 if (first_scb == scb) { 5905 struct scb *next_scb; 5906 5907 /* 5908 * Maintain order in the collision free 5909 * lists for fairness if this device has 5910 * other colliding tags active. 5911 */ 5912 next_scb = LIST_NEXT(scb, collision_links); 5913 if (next_scb != NULL) { 5914 TAILQ_INSERT_AFTER(free_tailq, scb, 5915 next_scb, links.tqe); 5916 } 5917 TAILQ_REMOVE(free_tailq, scb, links.tqe); 5918 } 5919 LIST_REMOVE(scb, collision_links); 5920 } 5921 5922 /* 5923 * Get a free scb. If there are none, see if we can allocate a new SCB. 5924 */ 5925 struct scb * 5926 ahd_get_scb(struct ahd_softc *ahd, u_int col_idx) 5927 { 5928 struct scb *scb; 5929 int tries; 5930 5931 tries = 0; 5932 look_again: 5933 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5934 if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) { 5935 ahd_rem_col_list(ahd, scb); 5936 goto found; 5937 } 5938 } 5939 if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL) { 5940 if (tries++ != 0) 5941 return (NULL); 5942 if (ahd_alloc_scbs(ahd) == 0) 5943 return (NULL); 5944 goto look_again; 5945 } 5946 LIST_REMOVE(scb, links.le); 5947 if (col_idx != AHD_NEVER_COL_IDX 5948 && (scb->col_scb != NULL) 5949 && (scb->col_scb->flags & SCB_ACTIVE) == 0) { 5950 LIST_REMOVE(scb->col_scb, links.le); 5951 ahd_add_col_list(ahd, scb->col_scb, col_idx); 5952 } 5953 found: 5954 scb->flags |= SCB_ACTIVE; 5955 return (scb); 5956 } 5957 5958 /* 5959 * Return an SCB resource to the free list. 5960 */ 5961 void 5962 ahd_free_scb(struct ahd_softc *ahd, struct scb *scb) 5963 { 5964 5965 /* Clean up for the next user */ 5966 scb->flags = SCB_FLAG_NONE; 5967 scb->hscb->control = 0; 5968 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL; 5969 5970 if (scb->col_scb == NULL) { 5971 /* 5972 * No collision possible. Just free normally. 5973 */ 5974 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5975 scb, links.le); 5976 } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) { 5977 /* 5978 * The SCB we might have collided with is on 5979 * a free collision list. Put both SCBs on 5980 * the generic list. 5981 */ 5982 ahd_rem_col_list(ahd, scb->col_scb); 5983 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5984 scb, links.le); 5985 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5986 scb->col_scb, links.le); 5987 } else if ((scb->col_scb->flags 5988 & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE 5989 && (scb->col_scb->hscb->control & TAG_ENB) != 0) { 5990 /* 5991 * The SCB we might collide with on the next allocation 5992 * is still active in a non-packetized, tagged, context. 5993 * Put us on the SCB collision list. 5994 */ 5995 ahd_add_col_list(ahd, scb, 5996 AHD_GET_SCB_COL_IDX(ahd, scb->col_scb)); 5997 } else { 5998 /* 5999 * The SCB we might collide with on the next allocation 6000 * is either active in a packetized context, or free. 6001 * Since we can't collide, put this SCB on the generic 6002 * free list. 6003 */ 6004 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 6005 scb, links.le); 6006 } 6007 6008 aic_platform_scb_free(ahd, scb); 6009 } 6010 6011 int 6012 ahd_alloc_scbs(struct ahd_softc *ahd) 6013 { 6014 struct scb_data *scb_data; 6015 struct scb *next_scb; 6016 struct hardware_scb *hscb; 6017 struct map_node *hscb_map; 6018 struct map_node *sg_map; 6019 struct map_node *sense_map; 6020 uint8_t *segs; 6021 uint8_t *sense_data; 6022 bus_addr_t hscb_busaddr; 6023 bus_addr_t sg_busaddr; 6024 bus_addr_t sense_busaddr; 6025 int newcount; 6026 int i; 6027 6028 scb_data = &ahd->scb_data; 6029 if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC) 6030 /* Can't allocate any more */ 6031 return (0); 6032 6033 if (scb_data->scbs_left != 0) { 6034 int offset; 6035 6036 offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left; 6037 hscb_map = SLIST_FIRST(&scb_data->hscb_maps); 6038 hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset]; 6039 hscb_busaddr = hscb_map->busaddr + (offset * sizeof(*hscb)); 6040 } else { 6041 hscb_map = malloc(sizeof(*hscb_map), M_DEVBUF, M_NOWAIT); 6042 6043 if (hscb_map == NULL) 6044 return (0); 6045 6046 /* Allocate the next batch of hardware SCBs */ 6047 if (aic_dmamem_alloc(ahd, scb_data->hscb_dmat, 6048 (void **)&hscb_map->vaddr, 6049 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6050 &hscb_map->dmamap) != 0) { 6051 free(hscb_map, M_DEVBUF); 6052 return (0); 6053 } 6054 6055 SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links); 6056 6057 aic_dmamap_load(ahd, scb_data->hscb_dmat, hscb_map->dmamap, 6058 hscb_map->vaddr, PAGE_SIZE, ahd_dmamap_cb, 6059 &hscb_map->busaddr, /*flags*/0); 6060 6061 hscb = (struct hardware_scb *)hscb_map->vaddr; 6062 hscb_busaddr = hscb_map->busaddr; 6063 scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb); 6064 } 6065 6066 if (scb_data->sgs_left != 0) { 6067 int offset; 6068 6069 offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd)) 6070 - scb_data->sgs_left) * ahd_sglist_size(ahd); 6071 sg_map = SLIST_FIRST(&scb_data->sg_maps); 6072 segs = sg_map->vaddr + offset; 6073 sg_busaddr = sg_map->busaddr + offset; 6074 } else { 6075 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT); 6076 6077 if (sg_map == NULL) 6078 return (0); 6079 6080 /* Allocate the next batch of S/G lists */ 6081 if (aic_dmamem_alloc(ahd, scb_data->sg_dmat, 6082 (void **)&sg_map->vaddr, 6083 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6084 &sg_map->dmamap) != 0) { 6085 free(sg_map, M_DEVBUF); 6086 return (0); 6087 } 6088 6089 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links); 6090 6091 aic_dmamap_load(ahd, scb_data->sg_dmat, sg_map->dmamap, 6092 sg_map->vaddr, ahd_sglist_allocsize(ahd), 6093 ahd_dmamap_cb, &sg_map->busaddr, /*flags*/0); 6094 6095 segs = sg_map->vaddr; 6096 sg_busaddr = sg_map->busaddr; 6097 scb_data->sgs_left = 6098 ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd); 6099 #ifdef AHD_DEBUG 6100 if (ahd_debug & AHD_SHOW_MEMORY) 6101 printf("Mapped SG data\n"); 6102 #endif 6103 } 6104 6105 if (scb_data->sense_left != 0) { 6106 int offset; 6107 6108 offset = PAGE_SIZE - (AHD_SENSE_BUFSIZE * scb_data->sense_left); 6109 sense_map = SLIST_FIRST(&scb_data->sense_maps); 6110 sense_data = sense_map->vaddr + offset; 6111 sense_busaddr = sense_map->busaddr + offset; 6112 } else { 6113 sense_map = malloc(sizeof(*sense_map), M_DEVBUF, M_NOWAIT); 6114 6115 if (sense_map == NULL) 6116 return (0); 6117 6118 /* Allocate the next batch of sense buffers */ 6119 if (aic_dmamem_alloc(ahd, scb_data->sense_dmat, 6120 (void **)&sense_map->vaddr, 6121 BUS_DMA_NOWAIT, &sense_map->dmamap) != 0) { 6122 free(sense_map, M_DEVBUF); 6123 return (0); 6124 } 6125 6126 SLIST_INSERT_HEAD(&scb_data->sense_maps, sense_map, links); 6127 6128 aic_dmamap_load(ahd, scb_data->sense_dmat, sense_map->dmamap, 6129 sense_map->vaddr, PAGE_SIZE, ahd_dmamap_cb, 6130 &sense_map->busaddr, /*flags*/0); 6131 6132 sense_data = sense_map->vaddr; 6133 sense_busaddr = sense_map->busaddr; 6134 scb_data->sense_left = PAGE_SIZE / AHD_SENSE_BUFSIZE; 6135 #ifdef AHD_DEBUG 6136 if (ahd_debug & AHD_SHOW_MEMORY) 6137 printf("Mapped sense data\n"); 6138 #endif 6139 } 6140 6141 newcount = MIN(scb_data->sense_left, scb_data->scbs_left); 6142 newcount = MIN(newcount, scb_data->sgs_left); 6143 newcount = MIN(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs)); 6144 scb_data->sense_left -= newcount; 6145 scb_data->scbs_left -= newcount; 6146 scb_data->sgs_left -= newcount; 6147 for (i = 0; i < newcount; i++) { 6148 struct scb_platform_data *pdata; 6149 u_int col_tag; 6150 #ifndef __linux__ 6151 int error; 6152 #endif 6153 6154 next_scb = (struct scb *)malloc(sizeof(*next_scb), 6155 M_DEVBUF, M_NOWAIT); 6156 if (next_scb == NULL) 6157 break; 6158 6159 pdata = (struct scb_platform_data *)malloc(sizeof(*pdata), 6160 M_DEVBUF, M_NOWAIT); 6161 if (pdata == NULL) { 6162 free(next_scb, M_DEVBUF); 6163 break; 6164 } 6165 next_scb->platform_data = pdata; 6166 next_scb->hscb_map = hscb_map; 6167 next_scb->sg_map = sg_map; 6168 next_scb->sense_map = sense_map; 6169 next_scb->sg_list = segs; 6170 next_scb->sense_data = sense_data; 6171 next_scb->sense_busaddr = sense_busaddr; 6172 memset(hscb, 0, sizeof(*hscb)); 6173 next_scb->hscb = hscb; 6174 hscb->hscb_busaddr = aic_htole32(hscb_busaddr); 6175 6176 /* 6177 * The sequencer always starts with the second entry. 6178 * The first entry is embedded in the scb. 6179 */ 6180 next_scb->sg_list_busaddr = sg_busaddr; 6181 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 6182 next_scb->sg_list_busaddr 6183 += sizeof(struct ahd_dma64_seg); 6184 else 6185 next_scb->sg_list_busaddr += sizeof(struct ahd_dma_seg); 6186 next_scb->ahd_softc = ahd; 6187 next_scb->flags = SCB_FLAG_NONE; 6188 #ifndef __linux__ 6189 error = aic_dmamap_create(ahd, ahd->buffer_dmat, /*flags*/0, 6190 &next_scb->dmamap); 6191 if (error != 0) { 6192 free(next_scb, M_DEVBUF); 6193 free(pdata, M_DEVBUF); 6194 break; 6195 } 6196 #endif 6197 next_scb->hscb->tag = aic_htole16(scb_data->numscbs); 6198 col_tag = scb_data->numscbs ^ 0x100; 6199 next_scb->col_scb = ahd_find_scb_by_tag(ahd, col_tag); 6200 if (next_scb->col_scb != NULL) 6201 next_scb->col_scb->col_scb = next_scb; 6202 aic_timer_init(&next_scb->io_timer); 6203 ahd_free_scb(ahd, next_scb); 6204 hscb++; 6205 hscb_busaddr += sizeof(*hscb); 6206 segs += ahd_sglist_size(ahd); 6207 sg_busaddr += ahd_sglist_size(ahd); 6208 sense_data += AHD_SENSE_BUFSIZE; 6209 sense_busaddr += AHD_SENSE_BUFSIZE; 6210 scb_data->numscbs++; 6211 } 6212 return (i); 6213 } 6214 6215 void 6216 ahd_controller_info(struct ahd_softc *ahd, char *buf) 6217 { 6218 const char *speed; 6219 const char *type; 6220 int len; 6221 6222 len = sprintf(buf, "%s: ", ahd_chip_names[ahd->chip & AHD_CHIPID_MASK]); 6223 buf += len; 6224 6225 speed = "Ultra320 "; 6226 if ((ahd->features & AHD_WIDE) != 0) { 6227 type = "Wide "; 6228 } else { 6229 type = "Single "; 6230 } 6231 len = sprintf(buf, "%s%sChannel %c, SCSI Id=%d, ", 6232 speed, type, ahd->channel, ahd->our_id); 6233 buf += len; 6234 6235 sprintf(buf, "%s, %d SCBs", ahd->bus_description, 6236 ahd->scb_data.maxhscbs); 6237 } 6238 6239 static const char *channel_strings[] = { 6240 "Primary Low", 6241 "Primary High", 6242 "Secondary Low", 6243 "Secondary High" 6244 }; 6245 6246 static const char *termstat_strings[] = { 6247 "Terminated Correctly", 6248 "Over Terminated", 6249 "Under Terminated", 6250 "Not Configured" 6251 }; 6252 6253 /* 6254 * Start the board, ready for normal operation 6255 */ 6256 int 6257 ahd_init(struct ahd_softc *ahd) 6258 { 6259 uint8_t *next_vaddr; 6260 bus_addr_t next_baddr; 6261 size_t driver_data_size; 6262 int i; 6263 int error; 6264 u_int warn_user; 6265 uint8_t current_sensing; 6266 uint8_t fstat; 6267 6268 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6269 6270 ahd->stack_size = ahd_probe_stack_size(ahd); 6271 ahd->saved_stack = malloc(ahd->stack_size * sizeof(uint16_t), 6272 M_DEVBUF, M_NOWAIT); 6273 if (ahd->saved_stack == NULL) 6274 return (ENOMEM); 6275 6276 /* 6277 * Verify that the compiler hasn't over-agressively 6278 * padded important structures. 6279 */ 6280 if (sizeof(struct hardware_scb) != 64) 6281 panic("Hardware SCB size is incorrect"); 6282 6283 #ifdef AHD_DEBUG 6284 if ((ahd_debug & AHD_DEBUG_SEQUENCER) != 0) 6285 ahd->flags |= AHD_SEQUENCER_DEBUG; 6286 #endif 6287 6288 /* 6289 * Default to allowing initiator operations. 6290 */ 6291 ahd->flags |= AHD_INITIATORROLE; 6292 6293 /* 6294 * Only allow target mode features if this unit has them enabled. 6295 */ 6296 if ((AHD_TMODE_ENABLE & (0x1 << ahd->unit)) == 0) 6297 ahd->features &= ~AHD_TARGETMODE; 6298 6299 #ifndef __linux__ 6300 /* DMA tag for mapping buffers into device visible space. */ 6301 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 6302 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 6303 /*lowaddr*/ahd->flags & AHD_39BIT_ADDRESSING 6304 ? (bus_addr_t)0x7FFFFFFFFFULL 6305 : BUS_SPACE_MAXADDR_32BIT, 6306 /*highaddr*/BUS_SPACE_MAXADDR, 6307 /*filter*/NULL, /*filterarg*/NULL, 6308 /*maxsize*/(AHD_NSEG - 1) * PAGE_SIZE, 6309 /*nsegments*/AHD_NSEG, 6310 /*maxsegsz*/AHD_MAXTRANSFER_SIZE, 6311 /*flags*/BUS_DMA_ALLOCNOW, 6312 &ahd->buffer_dmat) != 0) { 6313 return (ENOMEM); 6314 } 6315 #endif 6316 6317 ahd->init_level++; 6318 6319 /* 6320 * DMA tag for our command fifos and other data in system memory 6321 * the card's sequencer must be able to access. For initiator 6322 * roles, we need to allocate space for the qoutfifo. When providing 6323 * for the target mode role, we must additionally provide space for 6324 * the incoming target command fifo. 6325 */ 6326 driver_data_size = AHD_SCB_MAX * sizeof(*ahd->qoutfifo) 6327 + sizeof(struct hardware_scb); 6328 if ((ahd->features & AHD_TARGETMODE) != 0) 6329 driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6330 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) 6331 driver_data_size += PKT_OVERRUN_BUFSIZE; 6332 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 6333 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 6334 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 6335 /*highaddr*/BUS_SPACE_MAXADDR, 6336 /*filter*/NULL, /*filterarg*/NULL, 6337 driver_data_size, 6338 /*nsegments*/1, 6339 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 6340 /*flags*/0, &ahd->shared_data_dmat) != 0) { 6341 return (ENOMEM); 6342 } 6343 6344 ahd->init_level++; 6345 6346 /* Allocation of driver data */ 6347 if (aic_dmamem_alloc(ahd, ahd->shared_data_dmat, 6348 (void **)&ahd->shared_data_map.vaddr, 6349 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6350 &ahd->shared_data_map.dmamap) != 0) { 6351 return (ENOMEM); 6352 } 6353 6354 ahd->init_level++; 6355 6356 /* And permanently map it in */ 6357 aic_dmamap_load(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap, 6358 ahd->shared_data_map.vaddr, driver_data_size, 6359 ahd_dmamap_cb, &ahd->shared_data_map.busaddr, 6360 /*flags*/0); 6361 ahd->qoutfifo = (struct ahd_completion *)ahd->shared_data_map.vaddr; 6362 next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE]; 6363 next_baddr = ahd->shared_data_map.busaddr 6364 + AHD_QOUT_SIZE*sizeof(struct ahd_completion); 6365 if ((ahd->features & AHD_TARGETMODE) != 0) { 6366 ahd->targetcmds = (struct target_cmd *)next_vaddr; 6367 next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6368 next_baddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6369 } 6370 6371 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) { 6372 ahd->overrun_buf = next_vaddr; 6373 next_vaddr += PKT_OVERRUN_BUFSIZE; 6374 next_baddr += PKT_OVERRUN_BUFSIZE; 6375 } 6376 6377 /* 6378 * We need one SCB to serve as the "next SCB". Since the 6379 * tag identifier in this SCB will never be used, there is 6380 * no point in using a valid HSCB tag from an SCB pulled from 6381 * the standard free pool. So, we allocate this "sentinel" 6382 * specially from the DMA safe memory chunk used for the QOUTFIFO. 6383 */ 6384 ahd->next_queued_hscb = (struct hardware_scb *)next_vaddr; 6385 ahd->next_queued_hscb_map = &ahd->shared_data_map; 6386 ahd->next_queued_hscb->hscb_busaddr = aic_htole32(next_baddr); 6387 6388 ahd->init_level++; 6389 6390 /* Allocate SCB data now that buffer_dmat is initialized */ 6391 if (ahd_init_scbdata(ahd) != 0) 6392 return (ENOMEM); 6393 6394 if ((ahd->flags & AHD_INITIATORROLE) == 0) 6395 ahd->flags &= ~AHD_RESET_BUS_A; 6396 6397 /* 6398 * Before committing these settings to the chip, give 6399 * the OSM one last chance to modify our configuration. 6400 */ 6401 ahd_platform_init(ahd); 6402 6403 /* Bring up the chip. */ 6404 ahd_chip_init(ahd); 6405 6406 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6407 6408 if ((ahd->flags & AHD_CURRENT_SENSING) == 0) 6409 goto init_done; 6410 6411 /* 6412 * Verify termination based on current draw and 6413 * warn user if the bus is over/under terminated. 6414 */ 6415 error = ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 6416 CURSENSE_ENB); 6417 if (error != 0) { 6418 printf("%s: current sensing timeout 1\n", ahd_name(ahd)); 6419 goto init_done; 6420 } 6421 for (i = 20, fstat = FLX_FSTAT_BUSY; 6422 (fstat & FLX_FSTAT_BUSY) != 0 && i; i--) { 6423 error = ahd_read_flexport(ahd, FLXADDR_FLEXSTAT, &fstat); 6424 if (error != 0) { 6425 printf("%s: current sensing timeout 2\n", 6426 ahd_name(ahd)); 6427 goto init_done; 6428 } 6429 } 6430 if (i == 0) { 6431 printf("%s: Timedout during current-sensing test\n", 6432 ahd_name(ahd)); 6433 goto init_done; 6434 } 6435 6436 /* Latch Current Sensing status. */ 6437 error = ahd_read_flexport(ahd, FLXADDR_CURRENT_STAT, ¤t_sensing); 6438 if (error != 0) { 6439 printf("%s: current sensing timeout 3\n", ahd_name(ahd)); 6440 goto init_done; 6441 } 6442 6443 /* Diable current sensing. */ 6444 ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0); 6445 6446 #ifdef AHD_DEBUG 6447 if ((ahd_debug & AHD_SHOW_TERMCTL) != 0) { 6448 printf("%s: current_sensing == 0x%x\n", 6449 ahd_name(ahd), current_sensing); 6450 } 6451 #endif 6452 warn_user = 0; 6453 for (i = 0; i < 4; i++, current_sensing >>= FLX_CSTAT_SHIFT) { 6454 u_int term_stat; 6455 6456 term_stat = (current_sensing & FLX_CSTAT_MASK); 6457 switch (term_stat) { 6458 case FLX_CSTAT_OVER: 6459 case FLX_CSTAT_UNDER: 6460 warn_user++; 6461 case FLX_CSTAT_INVALID: 6462 case FLX_CSTAT_OKAY: 6463 if (warn_user == 0 && bootverbose == 0) 6464 break; 6465 printf("%s: %s Channel %s\n", ahd_name(ahd), 6466 channel_strings[i], termstat_strings[term_stat]); 6467 break; 6468 } 6469 } 6470 if (warn_user) { 6471 printf("%s: WARNING. Termination is not configured correctly.\n" 6472 "%s: WARNING. SCSI bus operations may FAIL.\n", 6473 ahd_name(ahd), ahd_name(ahd)); 6474 AHD_CORRECTABLE_ERROR(ahd); 6475 } 6476 init_done: 6477 ahd_restart(ahd); 6478 aic_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_MS, 6479 ahd_stat_timer, ahd); 6480 return (0); 6481 } 6482 6483 /* 6484 * (Re)initialize chip state after a chip reset. 6485 */ 6486 static void 6487 ahd_chip_init(struct ahd_softc *ahd) 6488 { 6489 uint32_t busaddr; 6490 u_int sxfrctl1; 6491 u_int scsiseq_template; 6492 u_int wait; 6493 u_int i; 6494 u_int target; 6495 6496 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6497 /* 6498 * Take the LED out of diagnostic mode 6499 */ 6500 ahd_outb(ahd, SBLKCTL, ahd_inb(ahd, SBLKCTL) & ~(DIAGLEDEN|DIAGLEDON)); 6501 6502 /* 6503 * Return HS_MAILBOX to its default value. 6504 */ 6505 ahd->hs_mailbox = 0; 6506 ahd_outb(ahd, HS_MAILBOX, 0); 6507 6508 /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1. */ 6509 ahd_outb(ahd, IOWNID, ahd->our_id); 6510 ahd_outb(ahd, TOWNID, ahd->our_id); 6511 sxfrctl1 = (ahd->flags & AHD_TERM_ENB_A) != 0 ? STPWEN : 0; 6512 sxfrctl1 |= (ahd->flags & AHD_SPCHK_ENB_A) != 0 ? ENSPCHK : 0; 6513 if ((ahd->bugs & AHD_LONG_SETIMO_BUG) 6514 && (ahd->seltime != STIMESEL_MIN)) { 6515 /* 6516 * The selection timer duration is twice as long 6517 * as it should be. Halve it by adding "1" to 6518 * the user specified setting. 6519 */ 6520 sxfrctl1 |= ahd->seltime + STIMESEL_BUG_ADJ; 6521 } else { 6522 sxfrctl1 |= ahd->seltime; 6523 } 6524 6525 ahd_outb(ahd, SXFRCTL0, DFON); 6526 ahd_outb(ahd, SXFRCTL1, sxfrctl1|ahd->seltime|ENSTIMER|ACTNEGEN); 6527 ahd_outb(ahd, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR); 6528 6529 /* 6530 * Now that termination is set, wait for up 6531 * to 500ms for our transceivers to settle. If 6532 * the adapter does not have a cable attached, 6533 * the transceivers may never settle, so don't 6534 * complain if we fail here. 6535 */ 6536 for (wait = 10000; 6537 (ahd_inb(ahd, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait; 6538 wait--) 6539 aic_delay(100); 6540 6541 /* Clear any false bus resets due to the transceivers settling */ 6542 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 6543 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6544 6545 /* Initialize mode specific S/G state. */ 6546 for (i = 0; i < 2; i++) { 6547 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 6548 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 6549 ahd_outb(ahd, SG_STATE, 0); 6550 ahd_outb(ahd, CLRSEQINTSRC, 0xFF); 6551 ahd_outb(ahd, SEQIMODE, 6552 ENSAVEPTRS|ENCFG4DATA|ENCFG4ISTAT 6553 |ENCFG4TSTAT|ENCFG4ICMD|ENCFG4TCMD); 6554 } 6555 6556 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 6557 ahd_outb(ahd, DSCOMMAND0, ahd_inb(ahd, DSCOMMAND0)|MPARCKEN|CACHETHEN); 6558 ahd_outb(ahd, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75); 6559 ahd_outb(ahd, SIMODE0, ENIOERR|ENOVERRUN); 6560 ahd_outb(ahd, SIMODE3, ENNTRAMPERR|ENOSRAMPERR); 6561 if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) { 6562 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|AUTO_MSGOUT_DE); 6563 } else { 6564 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|BUSFREEREV|AUTO_MSGOUT_DE); 6565 } 6566 ahd_outb(ahd, SCSCHKN, CURRFIFODEF|WIDERESEN|SHVALIDSTDIS); 6567 if ((ahd->chip & AHD_BUS_MASK) == AHD_PCIX) 6568 /* 6569 * Do not issue a target abort when a split completion 6570 * error occurs. Let our PCIX interrupt handler deal 6571 * with it instead. H2A4 Razor #625 6572 */ 6573 ahd_outb(ahd, PCIXCTL, ahd_inb(ahd, PCIXCTL) | SPLTSTADIS); 6574 6575 if ((ahd->bugs & AHD_LQOOVERRUN_BUG) != 0) 6576 ahd_outb(ahd, LQOSCSCTL, LQONOCHKOVER); 6577 6578 /* 6579 * Tweak IOCELL settings. 6580 */ 6581 if ((ahd->flags & AHD_HP_BOARD) != 0) { 6582 for (i = 0; i < NUMDSPS; i++) { 6583 ahd_outb(ahd, DSPSELECT, i); 6584 ahd_outb(ahd, WRTBIASCTL, WRTBIASCTL_HP_DEFAULT); 6585 } 6586 #ifdef AHD_DEBUG 6587 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6588 printf("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd), 6589 WRTBIASCTL_HP_DEFAULT); 6590 #endif 6591 } 6592 ahd_setup_iocell_workaround(ahd); 6593 6594 /* 6595 * Enable LQI Manager interrupts. 6596 */ 6597 ahd_outb(ahd, LQIMODE1, ENLQIPHASE_LQ|ENLQIPHASE_NLQ|ENLIQABORT 6598 | ENLQICRCI_LQ|ENLQICRCI_NLQ|ENLQIBADLQI 6599 | ENLQIOVERI_LQ|ENLQIOVERI_NLQ); 6600 ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC); 6601 /* 6602 * We choose to have the sequencer catch LQOPHCHGINPKT errors 6603 * manually for the command phase at the start of a packetized 6604 * selection case. ENLQOBUSFREE should be made redundant by 6605 * the BUSFREE interrupt, but it seems that some LQOBUSFREE 6606 * events fail to assert the BUSFREE interrupt so we must 6607 * also enable LQOBUSFREE interrupts. 6608 */ 6609 ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE); 6610 6611 /* 6612 * Setup sequencer interrupt handlers. 6613 */ 6614 ahd_outw(ahd, INTVEC1_ADDR, ahd_resolve_seqaddr(ahd, LABEL_seq_isr)); 6615 ahd_outw(ahd, INTVEC2_ADDR, ahd_resolve_seqaddr(ahd, LABEL_timer_isr)); 6616 6617 /* 6618 * Setup SCB Offset registers. 6619 */ 6620 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6621 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, 6622 pkt_long_lun)); 6623 } else { 6624 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, lun)); 6625 } 6626 ahd_outb(ahd, CMDLENPTR, offsetof(struct hardware_scb, cdb_len)); 6627 ahd_outb(ahd, ATTRPTR, offsetof(struct hardware_scb, task_attribute)); 6628 ahd_outb(ahd, FLAGPTR, offsetof(struct hardware_scb, task_management)); 6629 ahd_outb(ahd, CMDPTR, offsetof(struct hardware_scb, 6630 shared_data.idata.cdb)); 6631 ahd_outb(ahd, QNEXTPTR, 6632 offsetof(struct hardware_scb, next_hscb_busaddr)); 6633 ahd_outb(ahd, ABRTBITPTR, MK_MESSAGE_BIT_OFFSET); 6634 ahd_outb(ahd, ABRTBYTEPTR, offsetof(struct hardware_scb, control)); 6635 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6636 ahd_outb(ahd, LUNLEN, 6637 sizeof(ahd->next_queued_hscb->pkt_long_lun) - 1); 6638 } else { 6639 ahd_outb(ahd, LUNLEN, LUNLEN_SINGLE_LEVEL_LUN); 6640 } 6641 ahd_outb(ahd, CDBLIMIT, SCB_CDB_LEN_PTR - 1); 6642 ahd_outb(ahd, MAXCMD, 0xFF); 6643 ahd_outb(ahd, SCBAUTOPTR, 6644 AUSCBPTR_EN | offsetof(struct hardware_scb, tag)); 6645 6646 /* We haven't been enabled for target mode yet. */ 6647 ahd_outb(ahd, MULTARGID, 0); 6648 ahd_outb(ahd, MULTARGID + 1, 0); 6649 6650 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6651 /* Initialize the negotiation table. */ 6652 if ((ahd->features & AHD_NEW_IOCELL_OPTS) == 0) { 6653 /* 6654 * Clear the spare bytes in the neg table to avoid 6655 * spurious parity errors. 6656 */ 6657 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6658 ahd_outb(ahd, NEGOADDR, target); 6659 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PER_DEV0); 6660 for (i = 0; i < AHD_NUM_PER_DEV_ANNEXCOLS; i++) 6661 ahd_outb(ahd, ANNEXDAT, 0); 6662 } 6663 } 6664 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6665 struct ahd_devinfo devinfo; 6666 struct ahd_initiator_tinfo *tinfo; 6667 struct ahd_tmode_tstate *tstate; 6668 6669 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6670 target, &tstate); 6671 ahd_compile_devinfo(&devinfo, ahd->our_id, 6672 target, CAM_LUN_WILDCARD, 6673 'A', ROLE_INITIATOR); 6674 ahd_update_neg_table(ahd, &devinfo, &tinfo->curr); 6675 } 6676 6677 ahd_outb(ahd, CLRSINT3, NTRAMPERR|OSRAMPERR); 6678 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6679 6680 #ifdef NEEDS_MORE_TESTING 6681 /* 6682 * Always enable abort on incoming L_Qs if this feature is 6683 * supported. We use this to catch invalid SCB references. 6684 */ 6685 if ((ahd->bugs & AHD_ABORT_LQI_BUG) == 0) 6686 ahd_outb(ahd, LQCTL1, ABORTPENDING); 6687 else 6688 #endif 6689 ahd_outb(ahd, LQCTL1, 0); 6690 6691 /* All of our queues are empty */ 6692 ahd->qoutfifonext = 0; 6693 ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID; 6694 ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID); 6695 for (i = 0; i < AHD_QOUT_SIZE; i++) 6696 ahd->qoutfifo[i].valid_tag = 0; 6697 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD); 6698 6699 ahd->qinfifonext = 0; 6700 for (i = 0; i < AHD_QIN_SIZE; i++) 6701 ahd->qinfifo[i] = SCB_LIST_NULL; 6702 6703 if ((ahd->features & AHD_TARGETMODE) != 0) { 6704 /* All target command blocks start out invalid. */ 6705 for (i = 0; i < AHD_TMODE_CMDS; i++) 6706 ahd->targetcmds[i].cmd_valid = 0; 6707 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_PREREAD); 6708 ahd->tqinfifonext = 1; 6709 ahd_outb(ahd, KERNEL_TQINPOS, ahd->tqinfifonext - 1); 6710 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 6711 } 6712 6713 /* Initialize Scratch Ram. */ 6714 ahd_outb(ahd, SEQ_FLAGS, 0); 6715 ahd_outb(ahd, SEQ_FLAGS2, 0); 6716 6717 /* We don't have any waiting selections */ 6718 ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL); 6719 ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL); 6720 ahd_outw(ahd, MK_MESSAGE_SCB, SCB_LIST_NULL); 6721 ahd_outw(ahd, MK_MESSAGE_SCSIID, 0xFF); 6722 for (i = 0; i < AHD_NUM_TARGETS; i++) 6723 ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL); 6724 6725 /* 6726 * Nobody is waiting to be DMAed into the QOUTFIFO. 6727 */ 6728 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 6729 ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL); 6730 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 6731 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); 6732 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); 6733 6734 /* 6735 * The Freeze Count is 0. 6736 */ 6737 ahd->qfreeze_cnt = 0; 6738 ahd_outw(ahd, QFREEZE_COUNT, 0); 6739 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, 0); 6740 6741 /* 6742 * Tell the sequencer where it can find our arrays in memory. 6743 */ 6744 busaddr = ahd->shared_data_map.busaddr; 6745 ahd_outl(ahd, SHARED_DATA_ADDR, busaddr); 6746 ahd_outl(ahd, QOUTFIFO_NEXT_ADDR, busaddr); 6747 6748 /* 6749 * Setup the allowed SCSI Sequences based on operational mode. 6750 * If we are a target, we'll enable select in operations once 6751 * we've had a lun enabled. 6752 */ 6753 scsiseq_template = ENAUTOATNP; 6754 if ((ahd->flags & AHD_INITIATORROLE) != 0) 6755 scsiseq_template |= ENRSELI; 6756 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq_template); 6757 6758 /* There are no busy SCBs yet. */ 6759 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6760 int lun; 6761 6762 for (lun = 0; lun < AHD_NUM_LUNS_NONPKT; lun++) 6763 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(target, 'A', lun)); 6764 } 6765 6766 /* 6767 * Initialize the group code to command length table. 6768 * Vendor Unique codes are set to 0 so we only capture 6769 * the first byte of the cdb. These can be overridden 6770 * when target mode is enabled. 6771 */ 6772 ahd_outb(ahd, CMDSIZE_TABLE, 5); 6773 ahd_outb(ahd, CMDSIZE_TABLE + 1, 9); 6774 ahd_outb(ahd, CMDSIZE_TABLE + 2, 9); 6775 ahd_outb(ahd, CMDSIZE_TABLE + 3, 0); 6776 ahd_outb(ahd, CMDSIZE_TABLE + 4, 15); 6777 ahd_outb(ahd, CMDSIZE_TABLE + 5, 11); 6778 ahd_outb(ahd, CMDSIZE_TABLE + 6, 0); 6779 ahd_outb(ahd, CMDSIZE_TABLE + 7, 0); 6780 6781 /* Tell the sequencer of our initial queue positions */ 6782 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 6783 ahd_outb(ahd, QOFF_CTLSTA, SCB_QSIZE_512); 6784 ahd->qinfifonext = 0; 6785 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 6786 ahd_set_hescb_qoff(ahd, 0); 6787 ahd_set_snscb_qoff(ahd, 0); 6788 ahd_set_sescb_qoff(ahd, 0); 6789 ahd_set_sdscb_qoff(ahd, 0); 6790 6791 /* 6792 * Tell the sequencer which SCB will be the next one it receives. 6793 */ 6794 busaddr = aic_le32toh(ahd->next_queued_hscb->hscb_busaddr); 6795 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 6796 6797 /* 6798 * Default to coalescing disabled. 6799 */ 6800 ahd_outw(ahd, INT_COALESCING_CMDCOUNT, 0); 6801 ahd_outw(ahd, CMDS_PENDING, 0); 6802 ahd_update_coalescing_values(ahd, ahd->int_coalescing_timer, 6803 ahd->int_coalescing_maxcmds, 6804 ahd->int_coalescing_mincmds); 6805 ahd_enable_coalescing(ahd, FALSE); 6806 6807 ahd_loadseq(ahd); 6808 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6809 } 6810 6811 /* 6812 * Setup default device and controller settings. 6813 * This should only be called if our probe has 6814 * determined that no configuration data is available. 6815 */ 6816 int 6817 ahd_default_config(struct ahd_softc *ahd) 6818 { 6819 int targ; 6820 6821 ahd->our_id = 7; 6822 6823 /* 6824 * Allocate a tstate to house information for our 6825 * initiator presence on the bus as well as the user 6826 * data for any target mode initiator. 6827 */ 6828 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6829 printf("%s: unable to allocate ahd_tmode_tstate. " 6830 "Failing attach\n", ahd_name(ahd)); 6831 AHD_FATAL_ERROR(ahd); 6832 return (ENOMEM); 6833 } 6834 6835 for (targ = 0; targ < AHD_NUM_TARGETS; targ++) { 6836 struct ahd_devinfo devinfo; 6837 struct ahd_initiator_tinfo *tinfo; 6838 struct ahd_tmode_tstate *tstate; 6839 uint16_t target_mask; 6840 6841 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6842 targ, &tstate); 6843 /* 6844 * We support SPC2 and SPI4. 6845 */ 6846 tinfo->user.protocol_version = 4; 6847 tinfo->user.transport_version = 4; 6848 6849 target_mask = 0x01 << targ; 6850 ahd->user_discenable |= target_mask; 6851 tstate->discenable |= target_mask; 6852 ahd->user_tagenable |= target_mask; 6853 #ifdef AHD_FORCE_160 6854 tinfo->user.period = AHD_SYNCRATE_DT; 6855 #else 6856 tinfo->user.period = AHD_SYNCRATE_160; 6857 #endif 6858 tinfo->user.offset = MAX_OFFSET; 6859 tinfo->user.ppr_options = MSG_EXT_PPR_RD_STRM 6860 | MSG_EXT_PPR_WR_FLOW 6861 | MSG_EXT_PPR_HOLD_MCS 6862 | MSG_EXT_PPR_IU_REQ 6863 | MSG_EXT_PPR_QAS_REQ 6864 | MSG_EXT_PPR_DT_REQ; 6865 if ((ahd->features & AHD_RTI) != 0) 6866 tinfo->user.ppr_options |= MSG_EXT_PPR_RTI; 6867 6868 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT; 6869 6870 /* 6871 * Start out Async/Narrow/Untagged and with 6872 * conservative protocol support. 6873 */ 6874 tinfo->goal.protocol_version = 2; 6875 tinfo->goal.transport_version = 2; 6876 tinfo->curr.protocol_version = 2; 6877 tinfo->curr.transport_version = 2; 6878 ahd_compile_devinfo(&devinfo, ahd->our_id, 6879 targ, CAM_LUN_WILDCARD, 6880 'A', ROLE_INITIATOR); 6881 tstate->tagenable &= ~target_mask; 6882 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6883 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 6884 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 6885 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 6886 /*paused*/TRUE); 6887 } 6888 return (0); 6889 } 6890 6891 /* 6892 * Parse device configuration information. 6893 */ 6894 int 6895 ahd_parse_cfgdata(struct ahd_softc *ahd, struct seeprom_config *sc) 6896 { 6897 int targ; 6898 int max_targ; 6899 6900 max_targ = sc->max_targets & CFMAXTARG; 6901 ahd->our_id = sc->brtime_id & CFSCSIID; 6902 6903 /* 6904 * Allocate a tstate to house information for our 6905 * initiator presence on the bus as well as the user 6906 * data for any target mode initiator. 6907 */ 6908 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6909 printf("%s: unable to allocate ahd_tmode_tstate. " 6910 "Failing attach\n", ahd_name(ahd)); 6911 AHD_FATAL_ERROR(ahd); 6912 return (ENOMEM); 6913 } 6914 6915 for (targ = 0; targ < max_targ; targ++) { 6916 struct ahd_devinfo devinfo; 6917 struct ahd_initiator_tinfo *tinfo; 6918 struct ahd_transinfo *user_tinfo; 6919 struct ahd_tmode_tstate *tstate; 6920 uint16_t target_mask; 6921 6922 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6923 targ, &tstate); 6924 user_tinfo = &tinfo->user; 6925 6926 /* 6927 * We support SPC2 and SPI4. 6928 */ 6929 tinfo->user.protocol_version = 4; 6930 tinfo->user.transport_version = 4; 6931 6932 target_mask = 0x01 << targ; 6933 ahd->user_discenable &= ~target_mask; 6934 tstate->discenable &= ~target_mask; 6935 ahd->user_tagenable &= ~target_mask; 6936 if (sc->device_flags[targ] & CFDISC) { 6937 tstate->discenable |= target_mask; 6938 ahd->user_discenable |= target_mask; 6939 ahd->user_tagenable |= target_mask; 6940 } else { 6941 /* 6942 * Cannot be packetized without disconnection. 6943 */ 6944 sc->device_flags[targ] &= ~CFPACKETIZED; 6945 } 6946 6947 user_tinfo->ppr_options = 0; 6948 user_tinfo->period = (sc->device_flags[targ] & CFXFER); 6949 if (user_tinfo->period < CFXFER_ASYNC) { 6950 if (user_tinfo->period <= AHD_PERIOD_10MHz) 6951 user_tinfo->ppr_options |= MSG_EXT_PPR_DT_REQ; 6952 user_tinfo->offset = MAX_OFFSET; 6953 } else { 6954 user_tinfo->offset = 0; 6955 user_tinfo->period = AHD_ASYNC_XFER_PERIOD; 6956 } 6957 #ifdef AHD_FORCE_160 6958 if (user_tinfo->period <= AHD_SYNCRATE_160) 6959 user_tinfo->period = AHD_SYNCRATE_DT; 6960 #endif 6961 6962 if ((sc->device_flags[targ] & CFPACKETIZED) != 0) { 6963 user_tinfo->ppr_options |= MSG_EXT_PPR_RD_STRM 6964 | MSG_EXT_PPR_WR_FLOW 6965 | MSG_EXT_PPR_HOLD_MCS 6966 | MSG_EXT_PPR_IU_REQ; 6967 if ((ahd->features & AHD_RTI) != 0) 6968 user_tinfo->ppr_options |= MSG_EXT_PPR_RTI; 6969 } 6970 6971 if ((sc->device_flags[targ] & CFQAS) != 0) 6972 user_tinfo->ppr_options |= MSG_EXT_PPR_QAS_REQ; 6973 6974 if ((sc->device_flags[targ] & CFWIDEB) != 0) 6975 user_tinfo->width = MSG_EXT_WDTR_BUS_16_BIT; 6976 else 6977 user_tinfo->width = MSG_EXT_WDTR_BUS_8_BIT; 6978 #ifdef AHD_DEBUG 6979 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6980 printf("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width, 6981 user_tinfo->period, user_tinfo->offset, 6982 user_tinfo->ppr_options); 6983 #endif 6984 /* 6985 * Start out Async/Narrow/Untagged and with 6986 * conservative protocol support. 6987 */ 6988 tstate->tagenable &= ~target_mask; 6989 tinfo->goal.protocol_version = 2; 6990 tinfo->goal.transport_version = 2; 6991 tinfo->curr.protocol_version = 2; 6992 tinfo->curr.transport_version = 2; 6993 ahd_compile_devinfo(&devinfo, ahd->our_id, 6994 targ, CAM_LUN_WILDCARD, 6995 'A', ROLE_INITIATOR); 6996 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6997 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 6998 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 6999 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 7000 /*paused*/TRUE); 7001 } 7002 7003 ahd->flags &= ~AHD_SPCHK_ENB_A; 7004 if (sc->bios_control & CFSPARITY) 7005 ahd->flags |= AHD_SPCHK_ENB_A; 7006 7007 ahd->flags &= ~AHD_RESET_BUS_A; 7008 if (sc->bios_control & CFRESETB) 7009 ahd->flags |= AHD_RESET_BUS_A; 7010 7011 ahd->flags &= ~AHD_EXTENDED_TRANS_A; 7012 if (sc->bios_control & CFEXTEND) 7013 ahd->flags |= AHD_EXTENDED_TRANS_A; 7014 7015 ahd->flags &= ~AHD_BIOS_ENABLED; 7016 if ((sc->bios_control & CFBIOSSTATE) == CFBS_ENABLED) 7017 ahd->flags |= AHD_BIOS_ENABLED; 7018 7019 ahd->flags &= ~AHD_STPWLEVEL_A; 7020 if ((sc->adapter_control & CFSTPWLEVEL) != 0) 7021 ahd->flags |= AHD_STPWLEVEL_A; 7022 7023 return (0); 7024 } 7025 7026 /* 7027 * Parse device configuration information. 7028 */ 7029 int 7030 ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd) 7031 { 7032 int error; 7033 7034 error = ahd_verify_vpd_cksum(vpd); 7035 if (error == 0) 7036 return (EINVAL); 7037 if ((vpd->bios_flags & VPDBOOTHOST) != 0) 7038 ahd->flags |= AHD_BOOT_CHANNEL; 7039 return (0); 7040 } 7041 7042 void 7043 ahd_intr_enable(struct ahd_softc *ahd, int enable) 7044 { 7045 u_int hcntrl; 7046 7047 hcntrl = ahd_inb(ahd, HCNTRL); 7048 hcntrl &= ~INTEN; 7049 ahd->pause &= ~INTEN; 7050 ahd->unpause &= ~INTEN; 7051 if (enable) { 7052 hcntrl |= INTEN; 7053 ahd->pause |= INTEN; 7054 ahd->unpause |= INTEN; 7055 } 7056 ahd_outb(ahd, HCNTRL, hcntrl); 7057 } 7058 7059 void 7060 ahd_update_coalescing_values(struct ahd_softc *ahd, u_int timer, u_int maxcmds, 7061 u_int mincmds) 7062 { 7063 if (timer > AHD_TIMER_MAX_US) 7064 timer = AHD_TIMER_MAX_US; 7065 ahd->int_coalescing_timer = timer; 7066 7067 if (maxcmds > AHD_INT_COALESCING_MAXCMDS_MAX) 7068 maxcmds = AHD_INT_COALESCING_MAXCMDS_MAX; 7069 if (mincmds > AHD_INT_COALESCING_MINCMDS_MAX) 7070 mincmds = AHD_INT_COALESCING_MINCMDS_MAX; 7071 ahd->int_coalescing_maxcmds = maxcmds; 7072 ahd_outw(ahd, INT_COALESCING_TIMER, timer / AHD_TIMER_US_PER_TICK); 7073 ahd_outb(ahd, INT_COALESCING_MAXCMDS, -maxcmds); 7074 ahd_outb(ahd, INT_COALESCING_MINCMDS, -mincmds); 7075 } 7076 7077 void 7078 ahd_enable_coalescing(struct ahd_softc *ahd, int enable) 7079 { 7080 7081 ahd->hs_mailbox &= ~ENINT_COALESCE; 7082 if (enable) 7083 ahd->hs_mailbox |= ENINT_COALESCE; 7084 ahd_outb(ahd, HS_MAILBOX, ahd->hs_mailbox); 7085 ahd_flush_device_writes(ahd); 7086 ahd_run_qoutfifo(ahd); 7087 } 7088 7089 /* 7090 * Ensure that the card is paused in a location 7091 * outside of all critical sections and that all 7092 * pending work is completed prior to returning. 7093 * This routine should only be called from outside 7094 * an interrupt context. 7095 */ 7096 void 7097 ahd_pause_and_flushwork(struct ahd_softc *ahd) 7098 { 7099 u_int intstat; 7100 u_int maxloops; 7101 7102 maxloops = 1000; 7103 ahd->flags |= AHD_ALL_INTERRUPTS; 7104 ahd_pause(ahd); 7105 /* 7106 * Freeze the outgoing selections. We do this only 7107 * until we are safely paused without further selections 7108 * pending. 7109 */ 7110 ahd->qfreeze_cnt--; 7111 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 7112 ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN); 7113 do { 7114 ahd_unpause(ahd); 7115 /* 7116 * Give the sequencer some time to service 7117 * any active selections. 7118 */ 7119 aic_delay(500); 7120 7121 ahd_intr(ahd); 7122 ahd_pause(ahd); 7123 intstat = ahd_inb(ahd, INTSTAT); 7124 if ((intstat & INT_PEND) == 0) { 7125 ahd_clear_critical_section(ahd); 7126 intstat = ahd_inb(ahd, INTSTAT); 7127 } 7128 } while (--maxloops 7129 && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0) 7130 && ((intstat & INT_PEND) != 0 7131 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 7132 || (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0)); 7133 7134 if (maxloops == 0) { 7135 printf("Infinite interrupt loop, INTSTAT = %x", 7136 ahd_inb(ahd, INTSTAT)); 7137 AHD_FATAL_ERROR(ahd); 7138 } 7139 ahd->qfreeze_cnt++; 7140 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 7141 7142 ahd_flush_qoutfifo(ahd); 7143 7144 ahd_platform_flushwork(ahd); 7145 ahd->flags &= ~AHD_ALL_INTERRUPTS; 7146 } 7147 7148 int 7149 ahd_suspend(struct ahd_softc *ahd) 7150 { 7151 7152 ahd_pause_and_flushwork(ahd); 7153 7154 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 7155 ahd_unpause(ahd); 7156 return (EBUSY); 7157 } 7158 ahd_shutdown(ahd); 7159 return (0); 7160 } 7161 7162 int 7163 ahd_resume(struct ahd_softc *ahd) 7164 { 7165 7166 ahd_reset(ahd, /*reinit*/TRUE); 7167 ahd_intr_enable(ahd, TRUE); 7168 ahd_restart(ahd); 7169 return (0); 7170 } 7171 7172 /************************** Busy Target Table *********************************/ 7173 /* 7174 * Set SCBPTR to the SCB that contains the busy 7175 * table entry for TCL. Return the offset into 7176 * the SCB that contains the entry for TCL. 7177 * saved_scbid is dereferenced and set to the 7178 * scbid that should be restored once manipualtion 7179 * of the TCL entry is complete. 7180 */ 7181 static __inline u_int 7182 ahd_index_busy_tcl(struct ahd_softc *ahd, u_int *saved_scbid, u_int tcl) 7183 { 7184 /* 7185 * Index to the SCB that contains the busy entry. 7186 */ 7187 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7188 *saved_scbid = ahd_get_scbptr(ahd); 7189 ahd_set_scbptr(ahd, TCL_LUN(tcl) 7190 | ((TCL_TARGET_OFFSET(tcl) & 0xC) << 4)); 7191 7192 /* 7193 * And now calculate the SCB offset to the entry. 7194 * Each entry is 2 bytes wide, hence the 7195 * multiplication by 2. 7196 */ 7197 return (((TCL_TARGET_OFFSET(tcl) & 0x3) << 1) + SCB_DISCONNECTED_LISTS); 7198 } 7199 7200 /* 7201 * Return the untagged transaction id for a given target/channel lun. 7202 */ 7203 u_int 7204 ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl) 7205 { 7206 u_int scbid; 7207 u_int scb_offset; 7208 u_int saved_scbptr; 7209 7210 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 7211 scbid = ahd_inw_scbram(ahd, scb_offset); 7212 ahd_set_scbptr(ahd, saved_scbptr); 7213 return (scbid); 7214 } 7215 7216 void 7217 ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid) 7218 { 7219 u_int scb_offset; 7220 u_int saved_scbptr; 7221 7222 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 7223 ahd_outw(ahd, scb_offset, scbid); 7224 ahd_set_scbptr(ahd, saved_scbptr); 7225 } 7226 7227 /************************** SCB and SCB queue management **********************/ 7228 int 7229 ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target, 7230 char channel, int lun, u_int tag, role_t role) 7231 { 7232 int targ = SCB_GET_TARGET(ahd, scb); 7233 char chan = SCB_GET_CHANNEL(ahd, scb); 7234 int slun = SCB_GET_LUN(scb); 7235 int match; 7236 7237 match = ((chan == channel) || (channel == ALL_CHANNELS)); 7238 if (match != 0) 7239 match = ((targ == target) || (target == CAM_TARGET_WILDCARD)); 7240 if (match != 0) 7241 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD)); 7242 if (match != 0) { 7243 #ifdef AHD_TARGET_MODE 7244 int group; 7245 7246 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code); 7247 if (role == ROLE_INITIATOR) { 7248 match = (group != XPT_FC_GROUP_TMODE) 7249 && ((tag == SCB_GET_TAG(scb)) 7250 || (tag == SCB_LIST_NULL)); 7251 } else if (role == ROLE_TARGET) { 7252 match = (group == XPT_FC_GROUP_TMODE) 7253 && ((tag == scb->io_ctx->csio.tag_id) 7254 || (tag == SCB_LIST_NULL)); 7255 } 7256 #else /* !AHD_TARGET_MODE */ 7257 match = ((tag == SCB_GET_TAG(scb)) || (tag == SCB_LIST_NULL)); 7258 #endif /* AHD_TARGET_MODE */ 7259 } 7260 7261 return match; 7262 } 7263 7264 void 7265 ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb) 7266 { 7267 int target; 7268 char channel; 7269 int lun; 7270 7271 target = SCB_GET_TARGET(ahd, scb); 7272 lun = SCB_GET_LUN(scb); 7273 channel = SCB_GET_CHANNEL(ahd, scb); 7274 7275 ahd_search_qinfifo(ahd, target, channel, lun, 7276 /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN, 7277 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7278 7279 ahd_platform_freeze_devq(ahd, scb); 7280 } 7281 7282 void 7283 ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, struct scb *scb) 7284 { 7285 struct scb *prev_scb; 7286 ahd_mode_state saved_modes; 7287 7288 saved_modes = ahd_save_modes(ahd); 7289 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7290 prev_scb = NULL; 7291 if (ahd_qinfifo_count(ahd) != 0) { 7292 u_int prev_tag; 7293 u_int prev_pos; 7294 7295 prev_pos = AHD_QIN_WRAP(ahd->qinfifonext - 1); 7296 prev_tag = ahd->qinfifo[prev_pos]; 7297 prev_scb = ahd_lookup_scb(ahd, prev_tag); 7298 } 7299 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7300 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7301 ahd_restore_modes(ahd, saved_modes); 7302 } 7303 7304 static void 7305 ahd_qinfifo_requeue(struct ahd_softc *ahd, struct scb *prev_scb, 7306 struct scb *scb) 7307 { 7308 if (prev_scb == NULL) { 7309 uint32_t busaddr; 7310 7311 busaddr = aic_le32toh(scb->hscb->hscb_busaddr); 7312 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 7313 } else { 7314 prev_scb->hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr; 7315 ahd_sync_scb(ahd, prev_scb, 7316 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7317 } 7318 ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb); 7319 ahd->qinfifonext++; 7320 scb->hscb->next_hscb_busaddr = ahd->next_queued_hscb->hscb_busaddr; 7321 ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7322 } 7323 7324 static int 7325 ahd_qinfifo_count(struct ahd_softc *ahd) 7326 { 7327 u_int qinpos; 7328 u_int wrap_qinpos; 7329 u_int wrap_qinfifonext; 7330 7331 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7332 qinpos = ahd_get_snscb_qoff(ahd); 7333 wrap_qinpos = AHD_QIN_WRAP(qinpos); 7334 wrap_qinfifonext = AHD_QIN_WRAP(ahd->qinfifonext); 7335 if (wrap_qinfifonext >= wrap_qinpos) 7336 return (wrap_qinfifonext - wrap_qinpos); 7337 else 7338 return (wrap_qinfifonext 7339 + NUM_ELEMENTS(ahd->qinfifo) - wrap_qinpos); 7340 } 7341 7342 void 7343 ahd_reset_cmds_pending(struct ahd_softc *ahd) 7344 { 7345 struct scb *scb; 7346 ahd_mode_state saved_modes; 7347 u_int pending_cmds; 7348 7349 saved_modes = ahd_save_modes(ahd); 7350 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7351 7352 /* 7353 * Don't count any commands as outstanding that the 7354 * sequencer has already marked for completion. 7355 */ 7356 ahd_flush_qoutfifo(ahd); 7357 7358 pending_cmds = 0; 7359 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 7360 pending_cmds++; 7361 } 7362 ahd_outw(ahd, CMDS_PENDING, pending_cmds - ahd_qinfifo_count(ahd)); 7363 ahd_restore_modes(ahd, saved_modes); 7364 ahd->flags &= ~AHD_UPDATE_PEND_CMDS; 7365 } 7366 7367 void 7368 ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status) 7369 { 7370 cam_status ostat; 7371 cam_status cstat; 7372 7373 ostat = aic_get_transaction_status(scb); 7374 if (ostat == CAM_REQ_INPROG) 7375 aic_set_transaction_status(scb, status); 7376 cstat = aic_get_transaction_status(scb); 7377 if (cstat != CAM_REQ_CMP) 7378 aic_freeze_scb(scb); 7379 ahd_done(ahd, scb); 7380 } 7381 7382 int 7383 ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel, 7384 int lun, u_int tag, role_t role, uint32_t status, 7385 ahd_search_action action) 7386 { 7387 struct scb *scb; 7388 struct scb *mk_msg_scb; 7389 struct scb *prev_scb; 7390 ahd_mode_state saved_modes; 7391 u_int qinstart; 7392 u_int qinpos; 7393 u_int qintail; 7394 u_int tid_next; 7395 u_int tid_prev; 7396 u_int scbid; 7397 u_int seq_flags2; 7398 u_int savedscbptr; 7399 uint32_t busaddr; 7400 int found; 7401 int targets; 7402 7403 /* Must be in CCHAN mode */ 7404 saved_modes = ahd_save_modes(ahd); 7405 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7406 7407 /* 7408 * Halt any pending SCB DMA. The sequencer will reinitiate 7409 * this dma if the qinfifo is not empty once we unpause. 7410 */ 7411 if ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN|CCSCBDIR)) 7412 == (CCARREN|CCSCBEN|CCSCBDIR)) { 7413 ahd_outb(ahd, CCSCBCTL, 7414 ahd_inb(ahd, CCSCBCTL) & ~(CCARREN|CCSCBEN)); 7415 while ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN)) != 0) 7416 ; 7417 } 7418 /* Determine sequencer's position in the qinfifo. */ 7419 qintail = AHD_QIN_WRAP(ahd->qinfifonext); 7420 qinstart = ahd_get_snscb_qoff(ahd); 7421 qinpos = AHD_QIN_WRAP(qinstart); 7422 found = 0; 7423 prev_scb = NULL; 7424 7425 if (action == SEARCH_PRINT) { 7426 printf("qinstart = %d qinfifonext = %d\nQINFIFO:", 7427 qinstart, ahd->qinfifonext); 7428 } 7429 7430 /* 7431 * Start with an empty queue. Entries that are not chosen 7432 * for removal will be re-added to the queue as we go. 7433 */ 7434 ahd->qinfifonext = qinstart; 7435 busaddr = aic_le32toh(ahd->next_queued_hscb->hscb_busaddr); 7436 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 7437 7438 while (qinpos != qintail) { 7439 scb = ahd_lookup_scb(ahd, ahd->qinfifo[qinpos]); 7440 if (scb == NULL) { 7441 printf("qinpos = %d, SCB index = %d\n", 7442 qinpos, ahd->qinfifo[qinpos]); 7443 AHD_FATAL_ERROR(ahd); 7444 panic("Loop 1\n"); 7445 } 7446 7447 if (ahd_match_scb(ahd, scb, target, channel, lun, tag, role)) { 7448 /* 7449 * We found an scb that needs to be acted on. 7450 */ 7451 found++; 7452 switch (action) { 7453 case SEARCH_COMPLETE: 7454 if ((scb->flags & SCB_ACTIVE) == 0) 7455 printf("Inactive SCB in qinfifo\n"); 7456 ahd_done_with_status(ahd, scb, status); 7457 /* FALLTHROUGH */ 7458 case SEARCH_REMOVE: 7459 break; 7460 case SEARCH_PRINT: 7461 printf(" 0x%x", ahd->qinfifo[qinpos]); 7462 /* FALLTHROUGH */ 7463 case SEARCH_COUNT: 7464 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7465 prev_scb = scb; 7466 break; 7467 } 7468 } else { 7469 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7470 prev_scb = scb; 7471 } 7472 qinpos = AHD_QIN_WRAP(qinpos+1); 7473 } 7474 7475 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7476 7477 if (action == SEARCH_PRINT) 7478 printf("\nWAITING_TID_QUEUES:\n"); 7479 7480 /* 7481 * Search waiting for selection lists. We traverse the 7482 * list of "their ids" waiting for selection and, if 7483 * appropriate, traverse the SCBs of each "their id" 7484 * looking for matches. 7485 */ 7486 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7487 seq_flags2 = ahd_inb(ahd, SEQ_FLAGS2); 7488 if ((seq_flags2 & PENDING_MK_MESSAGE) != 0) { 7489 scbid = ahd_inw(ahd, MK_MESSAGE_SCB); 7490 mk_msg_scb = ahd_lookup_scb(ahd, scbid); 7491 } else 7492 mk_msg_scb = NULL; 7493 savedscbptr = ahd_get_scbptr(ahd); 7494 tid_next = ahd_inw(ahd, WAITING_TID_HEAD); 7495 tid_prev = SCB_LIST_NULL; 7496 targets = 0; 7497 for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) { 7498 u_int tid_head; 7499 u_int tid_tail; 7500 7501 targets++; 7502 if (targets > AHD_NUM_TARGETS) 7503 panic("TID LIST LOOP"); 7504 7505 if (scbid >= ahd->scb_data.numscbs) { 7506 printf("%s: Waiting TID List inconsistency. " 7507 "SCB index == 0x%x, yet numscbs == 0x%x.", 7508 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7509 ahd_dump_card_state(ahd); 7510 panic("for safety"); 7511 } 7512 scb = ahd_lookup_scb(ahd, scbid); 7513 if (scb == NULL) { 7514 printf("%s: SCB = 0x%x Not Active!\n", 7515 ahd_name(ahd), scbid); 7516 panic("Waiting TID List traversal\n"); 7517 } 7518 ahd_set_scbptr(ahd, scbid); 7519 tid_next = ahd_inw_scbram(ahd, SCB_NEXT2); 7520 if (ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 7521 SCB_LIST_NULL, ROLE_UNKNOWN) == 0) { 7522 tid_prev = scbid; 7523 continue; 7524 } 7525 7526 /* 7527 * We found a list of scbs that needs to be searched. 7528 */ 7529 if (action == SEARCH_PRINT) 7530 printf(" %d ( ", SCB_GET_TARGET(ahd, scb)); 7531 tid_head = scbid; 7532 found += ahd_search_scb_list(ahd, target, channel, 7533 lun, tag, role, status, 7534 action, &tid_head, &tid_tail, 7535 SCB_GET_TARGET(ahd, scb)); 7536 /* 7537 * Check any MK_MESSAGE SCB that is still waiting to 7538 * enter this target's waiting for selection queue. 7539 */ 7540 if (mk_msg_scb != NULL 7541 && ahd_match_scb(ahd, mk_msg_scb, target, channel, 7542 lun, tag, role)) { 7543 /* 7544 * We found an scb that needs to be acted on. 7545 */ 7546 found++; 7547 switch (action) { 7548 case SEARCH_COMPLETE: 7549 if ((mk_msg_scb->flags & SCB_ACTIVE) == 0) 7550 printf("Inactive SCB pending MK_MSG\n"); 7551 ahd_done_with_status(ahd, mk_msg_scb, status); 7552 /* FALLTHROUGH */ 7553 case SEARCH_REMOVE: 7554 { 7555 u_int tail_offset; 7556 7557 printf("Removing MK_MSG scb\n"); 7558 7559 /* 7560 * Reset our tail to the tail of the 7561 * main per-target list. 7562 */ 7563 tail_offset = WAITING_SCB_TAILS 7564 + (2 * SCB_GET_TARGET(ahd, mk_msg_scb)); 7565 ahd_outw(ahd, tail_offset, tid_tail); 7566 7567 seq_flags2 &= ~PENDING_MK_MESSAGE; 7568 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2); 7569 ahd_outw(ahd, CMDS_PENDING, 7570 ahd_inw(ahd, CMDS_PENDING)-1); 7571 mk_msg_scb = NULL; 7572 break; 7573 } 7574 case SEARCH_PRINT: 7575 printf(" 0x%x", SCB_GET_TAG(scb)); 7576 /* FALLTHROUGH */ 7577 case SEARCH_COUNT: 7578 break; 7579 } 7580 } 7581 7582 if (mk_msg_scb != NULL 7583 && SCBID_IS_NULL(tid_head) 7584 && ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 7585 SCB_LIST_NULL, ROLE_UNKNOWN)) { 7586 /* 7587 * When removing the last SCB for a target 7588 * queue with a pending MK_MESSAGE scb, we 7589 * must queue the MK_MESSAGE scb. 7590 */ 7591 printf("Queueing mk_msg_scb\n"); 7592 tid_head = ahd_inw(ahd, MK_MESSAGE_SCB); 7593 seq_flags2 &= ~PENDING_MK_MESSAGE; 7594 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2); 7595 mk_msg_scb = NULL; 7596 } 7597 if (tid_head != scbid) 7598 ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next); 7599 if (!SCBID_IS_NULL(tid_head)) 7600 tid_prev = tid_head; 7601 if (action == SEARCH_PRINT) 7602 printf(")\n"); 7603 } 7604 7605 /* Restore saved state. */ 7606 ahd_set_scbptr(ahd, savedscbptr); 7607 ahd_restore_modes(ahd, saved_modes); 7608 return (found); 7609 } 7610 7611 static int 7612 ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel, 7613 int lun, u_int tag, role_t role, uint32_t status, 7614 ahd_search_action action, u_int *list_head, 7615 u_int *list_tail, u_int tid) 7616 { 7617 struct scb *scb; 7618 u_int scbid; 7619 u_int next; 7620 u_int prev; 7621 int found; 7622 7623 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7624 found = 0; 7625 prev = SCB_LIST_NULL; 7626 next = *list_head; 7627 *list_tail = SCB_LIST_NULL; 7628 for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) { 7629 if (scbid >= ahd->scb_data.numscbs) { 7630 printf("%s:SCB List inconsistency. " 7631 "SCB == 0x%x, yet numscbs == 0x%x.", 7632 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7633 ahd_dump_card_state(ahd); 7634 panic("for safety"); 7635 } 7636 scb = ahd_lookup_scb(ahd, scbid); 7637 if (scb == NULL) { 7638 printf("%s: SCB = %d Not Active!\n", 7639 ahd_name(ahd), scbid); 7640 panic("Waiting List traversal\n"); 7641 } 7642 ahd_set_scbptr(ahd, scbid); 7643 *list_tail = scbid; 7644 next = ahd_inw_scbram(ahd, SCB_NEXT); 7645 if (ahd_match_scb(ahd, scb, target, channel, 7646 lun, SCB_LIST_NULL, role) == 0) { 7647 prev = scbid; 7648 continue; 7649 } 7650 found++; 7651 switch (action) { 7652 case SEARCH_COMPLETE: 7653 if ((scb->flags & SCB_ACTIVE) == 0) 7654 printf("Inactive SCB in Waiting List\n"); 7655 ahd_done_with_status(ahd, scb, status); 7656 /* FALLTHROUGH */ 7657 case SEARCH_REMOVE: 7658 ahd_rem_wscb(ahd, scbid, prev, next, tid); 7659 *list_tail = prev; 7660 if (SCBID_IS_NULL(prev)) 7661 *list_head = next; 7662 break; 7663 case SEARCH_PRINT: 7664 printf("0x%x ", scbid); 7665 case SEARCH_COUNT: 7666 prev = scbid; 7667 break; 7668 } 7669 if (found > AHD_SCB_MAX) 7670 panic("SCB LIST LOOP"); 7671 } 7672 if (action == SEARCH_COMPLETE 7673 || action == SEARCH_REMOVE) 7674 ahd_outw(ahd, CMDS_PENDING, ahd_inw(ahd, CMDS_PENDING) - found); 7675 return (found); 7676 } 7677 7678 static void 7679 ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev, 7680 u_int tid_cur, u_int tid_next) 7681 { 7682 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7683 7684 if (SCBID_IS_NULL(tid_cur)) { 7685 /* Bypass current TID list */ 7686 if (SCBID_IS_NULL(tid_prev)) { 7687 ahd_outw(ahd, WAITING_TID_HEAD, tid_next); 7688 } else { 7689 ahd_set_scbptr(ahd, tid_prev); 7690 ahd_outw(ahd, SCB_NEXT2, tid_next); 7691 } 7692 if (SCBID_IS_NULL(tid_next)) 7693 ahd_outw(ahd, WAITING_TID_TAIL, tid_prev); 7694 } else { 7695 /* Stitch through tid_cur */ 7696 if (SCBID_IS_NULL(tid_prev)) { 7697 ahd_outw(ahd, WAITING_TID_HEAD, tid_cur); 7698 } else { 7699 ahd_set_scbptr(ahd, tid_prev); 7700 ahd_outw(ahd, SCB_NEXT2, tid_cur); 7701 } 7702 ahd_set_scbptr(ahd, tid_cur); 7703 ahd_outw(ahd, SCB_NEXT2, tid_next); 7704 7705 if (SCBID_IS_NULL(tid_next)) 7706 ahd_outw(ahd, WAITING_TID_TAIL, tid_cur); 7707 } 7708 } 7709 7710 /* 7711 * Manipulate the waiting for selection list and return the 7712 * scb that follows the one that we remove. 7713 */ 7714 static u_int 7715 ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 7716 u_int prev, u_int next, u_int tid) 7717 { 7718 u_int tail_offset; 7719 7720 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7721 if (!SCBID_IS_NULL(prev)) { 7722 ahd_set_scbptr(ahd, prev); 7723 ahd_outw(ahd, SCB_NEXT, next); 7724 } 7725 7726 /* 7727 * SCBs that have MK_MESSAGE set in them may 7728 * cause the tail pointer to be updated without 7729 * setting the next pointer of the previous tail. 7730 * Only clear the tail if the removed SCB was 7731 * the tail. 7732 */ 7733 tail_offset = WAITING_SCB_TAILS + (2 * tid); 7734 if (SCBID_IS_NULL(next) 7735 && ahd_inw(ahd, tail_offset) == scbid) 7736 ahd_outw(ahd, tail_offset, prev); 7737 7738 ahd_add_scb_to_free_list(ahd, scbid); 7739 return (next); 7740 } 7741 7742 /* 7743 * Add the SCB as selected by SCBPTR onto the on chip list of 7744 * free hardware SCBs. This list is empty/unused if we are not 7745 * performing SCB paging. 7746 */ 7747 static void 7748 ahd_add_scb_to_free_list(struct ahd_softc *ahd, u_int scbid) 7749 { 7750 /* XXX Need some other mechanism to designate "free". */ 7751 /* 7752 * Invalidate the tag so that our abort 7753 * routines don't think it's active. 7754 ahd_outb(ahd, SCB_TAG, SCB_LIST_NULL); 7755 */ 7756 } 7757 7758 /******************************** Error Handling ******************************/ 7759 /* 7760 * Abort all SCBs that match the given description (target/channel/lun/tag), 7761 * setting their status to the passed in status if the status has not already 7762 * been modified from CAM_REQ_INPROG. This routine assumes that the sequencer 7763 * is paused before it is called. 7764 */ 7765 int 7766 ahd_abort_scbs(struct ahd_softc *ahd, int target, char channel, 7767 int lun, u_int tag, role_t role, uint32_t status) 7768 { 7769 struct scb *scbp; 7770 struct scb *scbp_next; 7771 u_int i, j; 7772 u_int maxtarget; 7773 u_int minlun; 7774 u_int maxlun; 7775 int found; 7776 ahd_mode_state saved_modes; 7777 7778 /* restore this when we're done */ 7779 saved_modes = ahd_save_modes(ahd); 7780 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7781 7782 found = ahd_search_qinfifo(ahd, target, channel, lun, SCB_LIST_NULL, 7783 role, CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7784 7785 /* 7786 * Clean out the busy target table for any untagged commands. 7787 */ 7788 i = 0; 7789 maxtarget = 16; 7790 if (target != CAM_TARGET_WILDCARD) { 7791 i = target; 7792 if (channel == 'B') 7793 i += 8; 7794 maxtarget = i + 1; 7795 } 7796 7797 if (lun == CAM_LUN_WILDCARD) { 7798 minlun = 0; 7799 maxlun = AHD_NUM_LUNS_NONPKT; 7800 } else if (lun >= AHD_NUM_LUNS_NONPKT) { 7801 minlun = maxlun = 0; 7802 } else { 7803 minlun = lun; 7804 maxlun = lun + 1; 7805 } 7806 7807 if (role != ROLE_TARGET) { 7808 for (;i < maxtarget; i++) { 7809 for (j = minlun;j < maxlun; j++) { 7810 u_int scbid; 7811 u_int tcl; 7812 7813 tcl = BUILD_TCL_RAW(i, 'A', j); 7814 scbid = ahd_find_busy_tcl(ahd, tcl); 7815 scbp = ahd_lookup_scb(ahd, scbid); 7816 if (scbp == NULL 7817 || ahd_match_scb(ahd, scbp, target, channel, 7818 lun, tag, role) == 0) 7819 continue; 7820 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(i, 'A', j)); 7821 } 7822 } 7823 } 7824 7825 /* 7826 * Don't abort commands that have already completed, 7827 * but haven't quite made it up to the host yet. 7828 */ 7829 ahd_flush_qoutfifo(ahd); 7830 7831 /* 7832 * Go through the pending CCB list and look for 7833 * commands for this target that are still active. 7834 * These are other tagged commands that were 7835 * disconnected when the reset occurred. 7836 */ 7837 scbp_next = LIST_FIRST(&ahd->pending_scbs); 7838 while (scbp_next != NULL) { 7839 scbp = scbp_next; 7840 scbp_next = LIST_NEXT(scbp, pending_links); 7841 if (ahd_match_scb(ahd, scbp, target, channel, lun, tag, role)) { 7842 cam_status ostat; 7843 7844 ostat = aic_get_transaction_status(scbp); 7845 if (ostat == CAM_REQ_INPROG) 7846 aic_set_transaction_status(scbp, status); 7847 if (aic_get_transaction_status(scbp) != CAM_REQ_CMP) 7848 aic_freeze_scb(scbp); 7849 if ((scbp->flags & SCB_ACTIVE) == 0) 7850 printf("Inactive SCB on pending list\n"); 7851 ahd_done(ahd, scbp); 7852 found++; 7853 } 7854 } 7855 ahd_restore_modes(ahd, saved_modes); 7856 ahd_platform_abort_scbs(ahd, target, channel, lun, tag, role, status); 7857 ahd->flags |= AHD_UPDATE_PEND_CMDS; 7858 return found; 7859 } 7860 7861 static void 7862 ahd_reset_current_bus(struct ahd_softc *ahd) 7863 { 7864 uint8_t scsiseq; 7865 7866 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7867 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) & ~ENSCSIRST); 7868 scsiseq = ahd_inb(ahd, SCSISEQ0) & ~(ENSELO|ENARBO|SCSIRSTO); 7869 ahd_outb(ahd, SCSISEQ0, scsiseq | SCSIRSTO); 7870 ahd_flush_device_writes(ahd); 7871 aic_delay(AHD_BUSRESET_DELAY); 7872 /* Turn off the bus reset */ 7873 ahd_outb(ahd, SCSISEQ0, scsiseq); 7874 ahd_flush_device_writes(ahd); 7875 aic_delay(AHD_BUSRESET_DELAY); 7876 if ((ahd->bugs & AHD_SCSIRST_BUG) != 0) { 7877 /* 7878 * 2A Razor #474 7879 * Certain chip state is not cleared for 7880 * SCSI bus resets that we initiate, so 7881 * we must reset the chip. 7882 */ 7883 ahd_reset(ahd, /*reinit*/TRUE); 7884 ahd_intr_enable(ahd, /*enable*/TRUE); 7885 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7886 } 7887 7888 ahd_clear_intstat(ahd); 7889 } 7890 7891 int 7892 ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset) 7893 { 7894 struct ahd_devinfo devinfo; 7895 u_int initiator; 7896 u_int target; 7897 u_int max_scsiid; 7898 int found; 7899 u_int fifo; 7900 u_int next_fifo; 7901 7902 ahd->pending_device = NULL; 7903 7904 ahd_compile_devinfo(&devinfo, 7905 CAM_TARGET_WILDCARD, 7906 CAM_TARGET_WILDCARD, 7907 CAM_LUN_WILDCARD, 7908 channel, ROLE_UNKNOWN); 7909 ahd_pause(ahd); 7910 7911 /* Make sure the sequencer is in a safe location. */ 7912 ahd_clear_critical_section(ahd); 7913 7914 #ifdef AHD_TARGET_MODE 7915 if ((ahd->flags & AHD_TARGETROLE) != 0) { 7916 ahd_run_tqinfifo(ahd, /*paused*/TRUE); 7917 } 7918 #endif 7919 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7920 7921 /* 7922 * Disable selections so no automatic hardware 7923 * functions will modify chip state. 7924 */ 7925 ahd_outb(ahd, SCSISEQ0, 0); 7926 ahd_outb(ahd, SCSISEQ1, 0); 7927 7928 /* 7929 * Safely shut down our DMA engines. Always start with 7930 * the FIFO that is not currently active (if any are 7931 * actively connected). 7932 */ 7933 next_fifo = fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 7934 if (next_fifo > CURRFIFO_1) 7935 /* If disconneced, arbitrarily start with FIFO1. */ 7936 next_fifo = fifo = 0; 7937 do { 7938 next_fifo ^= CURRFIFO_1; 7939 ahd_set_modes(ahd, next_fifo, next_fifo); 7940 ahd_outb(ahd, DFCNTRL, 7941 ahd_inb(ahd, DFCNTRL) & ~(SCSIEN|HDMAEN)); 7942 while ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) 7943 aic_delay(10); 7944 /* 7945 * Set CURRFIFO to the now inactive channel. 7946 */ 7947 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7948 ahd_outb(ahd, DFFSTAT, next_fifo); 7949 } while (next_fifo != fifo); 7950 7951 /* 7952 * Reset the bus if we are initiating this reset 7953 */ 7954 ahd_clear_msg_state(ahd); 7955 ahd_outb(ahd, SIMODE1, 7956 ahd_inb(ahd, SIMODE1) & ~(ENBUSFREE|ENSCSIRST)); 7957 7958 if (initiate_reset) 7959 ahd_reset_current_bus(ahd); 7960 7961 ahd_clear_intstat(ahd); 7962 7963 /* 7964 * Clean up all the state information for the 7965 * pending transactions on this bus. 7966 */ 7967 found = ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, channel, 7968 CAM_LUN_WILDCARD, SCB_LIST_NULL, 7969 ROLE_UNKNOWN, CAM_SCSI_BUS_RESET); 7970 7971 /* 7972 * Cleanup anything left in the FIFOs. 7973 */ 7974 ahd_clear_fifo(ahd, 0); 7975 ahd_clear_fifo(ahd, 1); 7976 7977 /* 7978 * Revert to async/narrow transfers until we renegotiate. 7979 */ 7980 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 7981 for (target = 0; target <= max_scsiid; target++) { 7982 if (ahd->enabled_targets[target] == NULL) 7983 continue; 7984 for (initiator = 0; initiator <= max_scsiid; initiator++) { 7985 struct ahd_devinfo devinfo; 7986 7987 ahd_compile_devinfo(&devinfo, target, initiator, 7988 CAM_LUN_WILDCARD, 7989 'A', ROLE_UNKNOWN); 7990 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 7991 AHD_TRANS_CUR, /*paused*/TRUE); 7992 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 7993 /*offset*/0, /*ppr_options*/0, 7994 AHD_TRANS_CUR, /*paused*/TRUE); 7995 } 7996 } 7997 7998 #ifdef AHD_TARGET_MODE 7999 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 8000 8001 /* 8002 * Send an immediate notify ccb to all target more peripheral 8003 * drivers affected by this action. 8004 */ 8005 for (target = 0; target <= max_scsiid; target++) { 8006 struct ahd_tmode_tstate* tstate; 8007 u_int lun; 8008 8009 tstate = ahd->enabled_targets[target]; 8010 if (tstate == NULL) 8011 continue; 8012 for (lun = 0; lun < AHD_NUM_LUNS; lun++) { 8013 struct ahd_tmode_lstate* lstate; 8014 8015 lstate = tstate->enabled_luns[lun]; 8016 if (lstate == NULL) 8017 continue; 8018 8019 ahd_queue_lstate_event(ahd, lstate, CAM_TARGET_WILDCARD, 8020 EVENT_TYPE_BUS_RESET, /*arg*/0); 8021 ahd_send_lstate_events(ahd, lstate); 8022 } 8023 } 8024 #endif 8025 /* Notify the XPT that a bus reset occurred */ 8026 ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD, 8027 CAM_LUN_WILDCARD, AC_BUS_RESET, NULL); 8028 ahd_restart(ahd); 8029 /* 8030 * Freeze the SIMQ until our poller can determine that 8031 * the bus reset has really gone away. We set the initial 8032 * timer to 0 to have the check performed as soon as possible 8033 * from the timer context. 8034 */ 8035 if ((ahd->flags & AHD_RESET_POLL_ACTIVE) == 0) { 8036 ahd->flags |= AHD_RESET_POLL_ACTIVE; 8037 aic_freeze_simq(ahd); 8038 aic_timer_reset(&ahd->reset_timer, 0, ahd_reset_poll, ahd); 8039 } 8040 return (found); 8041 } 8042 8043 #define AHD_RESET_POLL_MS 1 8044 static void 8045 ahd_reset_poll(void *arg) 8046 { 8047 struct ahd_softc *ahd = (struct ahd_softc *)arg; 8048 u_int scsiseq1; 8049 8050 ahd_lock(ahd); 8051 ahd_pause(ahd); 8052 ahd_update_modes(ahd); 8053 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8054 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 8055 if ((ahd_inb(ahd, SSTAT1) & SCSIRSTI) != 0) { 8056 aic_timer_reset(&ahd->reset_timer, AHD_RESET_POLL_MS, 8057 ahd_reset_poll, ahd); 8058 ahd_unpause(ahd); 8059 ahd_unlock(ahd); 8060 return; 8061 } 8062 8063 /* Reset is now low. Complete chip reinitialization. */ 8064 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST); 8065 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 8066 ahd_outb(ahd, SCSISEQ1, scsiseq1 & (ENSELI|ENRSELI|ENAUTOATNP)); 8067 ahd_unpause(ahd); 8068 ahd->flags &= ~AHD_RESET_POLL_ACTIVE; 8069 aic_release_simq(ahd); 8070 ahd_unlock(ahd); 8071 } 8072 8073 /**************************** Statistics Processing ***************************/ 8074 static void 8075 ahd_stat_timer(void *arg) 8076 { 8077 struct ahd_softc *ahd = (struct ahd_softc *)arg; 8078 int enint_coal; 8079 8080 ahd_lock(ahd); 8081 enint_coal = ahd->hs_mailbox & ENINT_COALESCE; 8082 if (ahd->cmdcmplt_total > ahd->int_coalescing_threshold) 8083 enint_coal |= ENINT_COALESCE; 8084 else if (ahd->cmdcmplt_total < ahd->int_coalescing_stop_threshold) 8085 enint_coal &= ~ENINT_COALESCE; 8086 8087 if (enint_coal != (ahd->hs_mailbox & ENINT_COALESCE)) { 8088 ahd_enable_coalescing(ahd, enint_coal); 8089 #ifdef AHD_DEBUG 8090 if ((ahd_debug & AHD_SHOW_INT_COALESCING) != 0) 8091 printf("%s: Interrupt coalescing " 8092 "now %sabled. Cmds %d\n", 8093 ahd_name(ahd), 8094 (enint_coal & ENINT_COALESCE) ? "en" : "dis", 8095 ahd->cmdcmplt_total); 8096 #endif 8097 } 8098 8099 ahd->cmdcmplt_bucket = (ahd->cmdcmplt_bucket+1) & (AHD_STAT_BUCKETS-1); 8100 ahd->cmdcmplt_total -= ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]; 8101 ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket] = 0; 8102 aic_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_MS, 8103 ahd_stat_timer, ahd); 8104 ahd_unlock(ahd); 8105 } 8106 8107 /****************************** Status Processing *****************************/ 8108 void 8109 ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb) 8110 { 8111 if (scb->hscb->shared_data.istatus.scsi_status != 0) { 8112 ahd_handle_scsi_status(ahd, scb); 8113 } else { 8114 ahd_calc_residual(ahd, scb); 8115 ahd_done(ahd, scb); 8116 } 8117 } 8118 8119 void 8120 ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb) 8121 { 8122 struct hardware_scb *hscb; 8123 int paused; 8124 8125 /* 8126 * The sequencer freezes its select-out queue 8127 * anytime a SCSI status error occurs. We must 8128 * handle the error and increment our qfreeze count 8129 * to allow the sequencer to continue. We don't 8130 * bother clearing critical sections here since all 8131 * operations are on data structures that the sequencer 8132 * is not touching once the queue is frozen. 8133 */ 8134 hscb = scb->hscb; 8135 8136 if (ahd_is_paused(ahd)) { 8137 paused = 1; 8138 } else { 8139 paused = 0; 8140 ahd_pause(ahd); 8141 } 8142 8143 /* Freeze the queue until the client sees the error. */ 8144 ahd_freeze_devq(ahd, scb); 8145 aic_freeze_scb(scb); 8146 ahd->qfreeze_cnt++; 8147 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 8148 8149 if (paused == 0) 8150 ahd_unpause(ahd); 8151 8152 /* Don't want to clobber the original sense code */ 8153 if ((scb->flags & SCB_SENSE) != 0) { 8154 /* 8155 * Clear the SCB_SENSE Flag and perform 8156 * a normal command completion. 8157 */ 8158 scb->flags &= ~SCB_SENSE; 8159 aic_set_transaction_status(scb, CAM_AUTOSENSE_FAIL); 8160 ahd_done(ahd, scb); 8161 return; 8162 } 8163 aic_set_transaction_status(scb, CAM_SCSI_STATUS_ERROR); 8164 aic_set_scsi_status(scb, hscb->shared_data.istatus.scsi_status); 8165 switch (hscb->shared_data.istatus.scsi_status) { 8166 case STATUS_PKT_SENSE: 8167 { 8168 struct scsi_status_iu_header *siu; 8169 8170 ahd_sync_sense(ahd, scb, BUS_DMASYNC_POSTREAD); 8171 siu = (struct scsi_status_iu_header *)scb->sense_data; 8172 aic_set_scsi_status(scb, siu->status); 8173 #ifdef AHD_DEBUG 8174 if ((ahd_debug & AHD_SHOW_SENSE) != 0) { 8175 ahd_print_path(ahd, scb); 8176 printf("SCB 0x%x Received PKT Status of 0x%x\n", 8177 SCB_GET_TAG(scb), siu->status); 8178 printf("\tflags = 0x%x, sense len = 0x%x, " 8179 "pktfail = 0x%x\n", 8180 siu->flags, scsi_4btoul(siu->sense_length), 8181 scsi_4btoul(siu->pkt_failures_length)); 8182 } 8183 #endif 8184 if ((siu->flags & SIU_RSPVALID) != 0) { 8185 ahd_print_path(ahd, scb); 8186 if (scsi_4btoul(siu->pkt_failures_length) < 4) { 8187 printf("Unable to parse pkt_failures\n"); 8188 } else { 8189 switch (SIU_PKTFAIL_CODE(siu)) { 8190 case SIU_PFC_NONE: 8191 printf("No packet failure found\n"); 8192 AHD_UNCORRECTABLE_ERROR(ahd); 8193 break; 8194 case SIU_PFC_CIU_FIELDS_INVALID: 8195 printf("Invalid Command IU Field\n"); 8196 AHD_UNCORRECTABLE_ERROR(ahd); 8197 break; 8198 case SIU_PFC_TMF_NOT_SUPPORTED: 8199 printf("TMF not supportd\n"); 8200 AHD_UNCORRECTABLE_ERROR(ahd); 8201 break; 8202 case SIU_PFC_TMF_FAILED: 8203 printf("TMF failed\n"); 8204 AHD_UNCORRECTABLE_ERROR(ahd); 8205 break; 8206 case SIU_PFC_INVALID_TYPE_CODE: 8207 printf("Invalid L_Q Type code\n"); 8208 AHD_UNCORRECTABLE_ERROR(ahd); 8209 break; 8210 case SIU_PFC_ILLEGAL_REQUEST: 8211 AHD_UNCORRECTABLE_ERROR(ahd); 8212 printf("Illegal request\n"); 8213 default: 8214 break; 8215 } 8216 } 8217 if (siu->status == SCSI_STATUS_OK) 8218 aic_set_transaction_status(scb, 8219 CAM_REQ_CMP_ERR); 8220 } 8221 if ((siu->flags & SIU_SNSVALID) != 0) { 8222 scb->flags |= SCB_PKT_SENSE; 8223 #ifdef AHD_DEBUG 8224 if ((ahd_debug & AHD_SHOW_SENSE) != 0) 8225 printf("Sense data available\n"); 8226 #endif 8227 } 8228 ahd_done(ahd, scb); 8229 break; 8230 } 8231 case SCSI_STATUS_CMD_TERMINATED: 8232 case SCSI_STATUS_CHECK_COND: 8233 { 8234 struct ahd_devinfo devinfo; 8235 struct ahd_dma_seg *sg; 8236 struct scsi_sense *sc; 8237 struct ahd_initiator_tinfo *targ_info; 8238 struct ahd_tmode_tstate *tstate; 8239 struct ahd_transinfo *tinfo; 8240 #ifdef AHD_DEBUG 8241 if (ahd_debug & AHD_SHOW_SENSE) { 8242 ahd_print_path(ahd, scb); 8243 printf("SCB %d: requests Check Status\n", 8244 SCB_GET_TAG(scb)); 8245 } 8246 #endif 8247 8248 if (aic_perform_autosense(scb) == 0) 8249 break; 8250 8251 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 8252 SCB_GET_TARGET(ahd, scb), 8253 SCB_GET_LUN(scb), 8254 SCB_GET_CHANNEL(ahd, scb), 8255 ROLE_INITIATOR); 8256 targ_info = ahd_fetch_transinfo(ahd, 8257 devinfo.channel, 8258 devinfo.our_scsiid, 8259 devinfo.target, 8260 &tstate); 8261 tinfo = &targ_info->curr; 8262 sg = scb->sg_list; 8263 sc = (struct scsi_sense *)hscb->shared_data.idata.cdb; 8264 /* 8265 * Save off the residual if there is one. 8266 */ 8267 ahd_update_residual(ahd, scb); 8268 #ifdef AHD_DEBUG 8269 if (ahd_debug & AHD_SHOW_SENSE) { 8270 ahd_print_path(ahd, scb); 8271 printf("Sending Sense\n"); 8272 } 8273 #endif 8274 scb->sg_count = 0; 8275 sg = ahd_sg_setup(ahd, scb, sg, ahd_get_sense_bufaddr(ahd, scb), 8276 aic_get_sense_bufsize(ahd, scb), 8277 /*last*/TRUE); 8278 sc->opcode = REQUEST_SENSE; 8279 sc->byte2 = 0; 8280 if (tinfo->protocol_version <= SCSI_REV_2 8281 && SCB_GET_LUN(scb) < 8) 8282 sc->byte2 = SCB_GET_LUN(scb) << 5; 8283 sc->unused[0] = 0; 8284 sc->unused[1] = 0; 8285 sc->length = aic_get_sense_bufsize(ahd, scb); 8286 sc->control = 0; 8287 8288 /* 8289 * We can't allow the target to disconnect. 8290 * This will be an untagged transaction and 8291 * having the target disconnect will make this 8292 * transaction indestinguishable from outstanding 8293 * tagged transactions. 8294 */ 8295 hscb->control = 0; 8296 8297 /* 8298 * This request sense could be because the 8299 * the device lost power or in some other 8300 * way has lost our transfer negotiations. 8301 * Renegotiate if appropriate. Unit attention 8302 * errors will be reported before any data 8303 * phases occur. 8304 */ 8305 if (aic_get_residual(scb) == aic_get_transfer_length(scb)) { 8306 ahd_update_neg_request(ahd, &devinfo, 8307 tstate, targ_info, 8308 AHD_NEG_IF_NON_ASYNC); 8309 } 8310 if (tstate->auto_negotiate & devinfo.target_mask) { 8311 hscb->control |= MK_MESSAGE; 8312 scb->flags &= 8313 ~(SCB_NEGOTIATE|SCB_ABORT|SCB_DEVICE_RESET); 8314 scb->flags |= SCB_AUTO_NEGOTIATE; 8315 } 8316 hscb->cdb_len = sizeof(*sc); 8317 ahd_setup_data_scb(ahd, scb); 8318 scb->flags |= SCB_SENSE; 8319 ahd_queue_scb(ahd, scb); 8320 /* 8321 * Ensure we have enough time to actually 8322 * retrieve the sense, but only schedule 8323 * the timer if we are not in recovery or 8324 * this is a recovery SCB that is allowed 8325 * to have an active timer. 8326 */ 8327 if (ahd->scb_data.recovery_scbs == 0 8328 || (scb->flags & SCB_RECOVERY_SCB) != 0) 8329 aic_scb_timer_reset(scb, 5 * 1000); 8330 break; 8331 } 8332 case SCSI_STATUS_OK: 8333 printf("%s: Interrupted for staus of 0???\n", 8334 ahd_name(ahd)); 8335 /* FALLTHROUGH */ 8336 default: 8337 ahd_done(ahd, scb); 8338 break; 8339 } 8340 } 8341 8342 /* 8343 * Calculate the residual for a just completed SCB. 8344 */ 8345 void 8346 ahd_calc_residual(struct ahd_softc *ahd, struct scb *scb) 8347 { 8348 struct hardware_scb *hscb; 8349 struct initiator_status *spkt; 8350 uint32_t sgptr; 8351 uint32_t resid_sgptr; 8352 uint32_t resid; 8353 8354 /* 8355 * 5 cases. 8356 * 1) No residual. 8357 * SG_STATUS_VALID clear in sgptr. 8358 * 2) Transferless command 8359 * 3) Never performed any transfers. 8360 * sgptr has SG_FULL_RESID set. 8361 * 4) No residual but target did not 8362 * save data pointers after the 8363 * last transfer, so sgptr was 8364 * never updated. 8365 * 5) We have a partial residual. 8366 * Use residual_sgptr to determine 8367 * where we are. 8368 */ 8369 8370 hscb = scb->hscb; 8371 sgptr = aic_le32toh(hscb->sgptr); 8372 if ((sgptr & SG_STATUS_VALID) == 0) 8373 /* Case 1 */ 8374 return; 8375 sgptr &= ~SG_STATUS_VALID; 8376 8377 if ((sgptr & SG_LIST_NULL) != 0) 8378 /* Case 2 */ 8379 return; 8380 8381 /* 8382 * Residual fields are the same in both 8383 * target and initiator status packets, 8384 * so we can always use the initiator fields 8385 * regardless of the role for this SCB. 8386 */ 8387 spkt = &hscb->shared_data.istatus; 8388 resid_sgptr = aic_le32toh(spkt->residual_sgptr); 8389 if ((sgptr & SG_FULL_RESID) != 0) { 8390 /* Case 3 */ 8391 resid = aic_get_transfer_length(scb); 8392 } else if ((resid_sgptr & SG_LIST_NULL) != 0) { 8393 /* Case 4 */ 8394 return; 8395 } else if ((resid_sgptr & SG_OVERRUN_RESID) != 0) { 8396 ahd_print_path(ahd, scb); 8397 printf("data overrun detected Tag == 0x%x.\n", 8398 SCB_GET_TAG(scb)); 8399 ahd_freeze_devq(ahd, scb); 8400 aic_set_transaction_status(scb, CAM_DATA_RUN_ERR); 8401 aic_freeze_scb(scb); 8402 return; 8403 } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) { 8404 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr); 8405 /* NOTREACHED */ 8406 } else { 8407 struct ahd_dma_seg *sg; 8408 8409 /* 8410 * Remainder of the SG where the transfer 8411 * stopped. 8412 */ 8413 resid = aic_le32toh(spkt->residual_datacnt) & AHD_SG_LEN_MASK; 8414 sg = ahd_sg_bus_to_virt(ahd, scb, resid_sgptr & SG_PTR_MASK); 8415 8416 /* The residual sg_ptr always points to the next sg */ 8417 sg--; 8418 8419 /* 8420 * Add up the contents of all residual 8421 * SG segments that are after the SG where 8422 * the transfer stopped. 8423 */ 8424 while ((aic_le32toh(sg->len) & AHD_DMA_LAST_SEG) == 0) { 8425 sg++; 8426 resid += aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 8427 } 8428 } 8429 if ((scb->flags & SCB_SENSE) == 0) 8430 aic_set_residual(scb, resid); 8431 else 8432 aic_set_sense_residual(scb, resid); 8433 8434 #ifdef AHD_DEBUG 8435 if ((ahd_debug & AHD_SHOW_MISC) != 0) { 8436 ahd_print_path(ahd, scb); 8437 printf("Handled %sResidual of %d bytes\n", 8438 (scb->flags & SCB_SENSE) ? "Sense " : "", resid); 8439 } 8440 #endif 8441 } 8442 8443 /******************************* Target Mode **********************************/ 8444 #ifdef AHD_TARGET_MODE 8445 /* 8446 * Add a target mode event to this lun's queue 8447 */ 8448 static void 8449 ahd_queue_lstate_event(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate, 8450 u_int initiator_id, u_int event_type, u_int event_arg) 8451 { 8452 struct ahd_tmode_event *event; 8453 int pending; 8454 8455 xpt_freeze_devq(lstate->path, /*count*/1); 8456 if (lstate->event_w_idx >= lstate->event_r_idx) 8457 pending = lstate->event_w_idx - lstate->event_r_idx; 8458 else 8459 pending = AHD_TMODE_EVENT_BUFFER_SIZE + 1 8460 - (lstate->event_r_idx - lstate->event_w_idx); 8461 8462 if (event_type == EVENT_TYPE_BUS_RESET 8463 || event_type == MSG_BUS_DEV_RESET) { 8464 /* 8465 * Any earlier events are irrelevant, so reset our buffer. 8466 * This has the effect of allowing us to deal with reset 8467 * floods (an external device holding down the reset line) 8468 * without losing the event that is really interesting. 8469 */ 8470 lstate->event_r_idx = 0; 8471 lstate->event_w_idx = 0; 8472 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE); 8473 } 8474 8475 if (pending == AHD_TMODE_EVENT_BUFFER_SIZE) { 8476 xpt_print_path(lstate->path); 8477 printf("immediate event %x:%x lost\n", 8478 lstate->event_buffer[lstate->event_r_idx].event_type, 8479 lstate->event_buffer[lstate->event_r_idx].event_arg); 8480 lstate->event_r_idx++; 8481 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8482 lstate->event_r_idx = 0; 8483 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE); 8484 } 8485 8486 event = &lstate->event_buffer[lstate->event_w_idx]; 8487 event->initiator_id = initiator_id; 8488 event->event_type = event_type; 8489 event->event_arg = event_arg; 8490 lstate->event_w_idx++; 8491 if (lstate->event_w_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8492 lstate->event_w_idx = 0; 8493 } 8494 8495 /* 8496 * Send any target mode events queued up waiting 8497 * for immediate notify resources. 8498 */ 8499 void 8500 ahd_send_lstate_events(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate) 8501 { 8502 struct ccb_hdr *ccbh; 8503 struct ccb_immediate_notify *inot; 8504 8505 while (lstate->event_r_idx != lstate->event_w_idx 8506 && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) { 8507 struct ahd_tmode_event *event; 8508 8509 event = &lstate->event_buffer[lstate->event_r_idx]; 8510 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle); 8511 inot = (struct ccb_immediate_notify *)ccbh; 8512 switch (event->event_type) { 8513 case EVENT_TYPE_BUS_RESET: 8514 ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN; 8515 break; 8516 default: 8517 ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN; 8518 inot->arg = event->event_type; 8519 inot->seq_id = event->event_arg; 8520 break; 8521 } 8522 inot->initiator_id = event->initiator_id; 8523 xpt_done((union ccb *)inot); 8524 lstate->event_r_idx++; 8525 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8526 lstate->event_r_idx = 0; 8527 } 8528 } 8529 #endif 8530 8531 /******************** Sequencer Program Patching/Download *********************/ 8532 8533 #ifdef AHD_DUMP_SEQ 8534 void 8535 ahd_dumpseq(struct ahd_softc* ahd) 8536 { 8537 int i; 8538 int max_prog; 8539 8540 max_prog = 2048; 8541 8542 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8543 ahd_outw(ahd, PRGMCNT, 0); 8544 for (i = 0; i < max_prog; i++) { 8545 uint8_t ins_bytes[4]; 8546 8547 ahd_insb(ahd, SEQRAM, ins_bytes, 4); 8548 printf("0x%08x\n", ins_bytes[0] << 24 8549 | ins_bytes[1] << 16 8550 | ins_bytes[2] << 8 8551 | ins_bytes[3]); 8552 } 8553 } 8554 #endif 8555 8556 static void 8557 ahd_loadseq(struct ahd_softc *ahd) 8558 { 8559 struct cs cs_table[num_critical_sections]; 8560 u_int begin_set[num_critical_sections]; 8561 u_int end_set[num_critical_sections]; 8562 struct patch *cur_patch; 8563 u_int cs_count; 8564 u_int cur_cs; 8565 u_int i; 8566 int downloaded; 8567 u_int skip_addr; 8568 u_int sg_prefetch_cnt; 8569 u_int sg_prefetch_cnt_limit; 8570 u_int sg_prefetch_align; 8571 u_int sg_size; 8572 u_int cacheline_mask; 8573 uint8_t download_consts[DOWNLOAD_CONST_COUNT]; 8574 8575 if (bootverbose) 8576 printf("%s: Downloading Sequencer Program...", 8577 ahd_name(ahd)); 8578 8579 #if DOWNLOAD_CONST_COUNT != 8 8580 #error "Download Const Mismatch" 8581 #endif 8582 /* 8583 * Start out with 0 critical sections 8584 * that apply to this firmware load. 8585 */ 8586 cs_count = 0; 8587 cur_cs = 0; 8588 memset(begin_set, 0, sizeof(begin_set)); 8589 memset(end_set, 0, sizeof(end_set)); 8590 8591 /* 8592 * Setup downloadable constant table. 8593 * 8594 * The computation for the S/G prefetch variables is 8595 * a bit complicated. We would like to always fetch 8596 * in terms of cachelined sized increments. However, 8597 * if the cacheline is not an even multiple of the 8598 * SG element size or is larger than our SG RAM, using 8599 * just the cache size might leave us with only a portion 8600 * of an SG element at the tail of a prefetch. If the 8601 * cacheline is larger than our S/G prefetch buffer less 8602 * the size of an SG element, we may round down to a cacheline 8603 * that doesn't contain any or all of the S/G of interest 8604 * within the bounds of our S/G ram. Provide variables to 8605 * the sequencer that will allow it to handle these edge 8606 * cases. 8607 */ 8608 /* Start by aligning to the nearest cacheline. */ 8609 sg_prefetch_align = ahd->pci_cachesize; 8610 if (sg_prefetch_align == 0) 8611 sg_prefetch_align = 8; 8612 /* Round down to the nearest power of 2. */ 8613 while (powerof2(sg_prefetch_align) == 0) 8614 sg_prefetch_align--; 8615 8616 cacheline_mask = sg_prefetch_align - 1; 8617 8618 /* 8619 * If the cacheline boundary is greater than half our prefetch RAM 8620 * we risk not being able to fetch even a single complete S/G 8621 * segment if we align to that boundary. 8622 */ 8623 if (sg_prefetch_align > CCSGADDR_MAX/2) 8624 sg_prefetch_align = CCSGADDR_MAX/2; 8625 /* Start by fetching a single cacheline. */ 8626 sg_prefetch_cnt = sg_prefetch_align; 8627 /* 8628 * Increment the prefetch count by cachelines until 8629 * at least one S/G element will fit. 8630 */ 8631 sg_size = sizeof(struct ahd_dma_seg); 8632 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 8633 sg_size = sizeof(struct ahd_dma64_seg); 8634 while (sg_prefetch_cnt < sg_size) 8635 sg_prefetch_cnt += sg_prefetch_align; 8636 /* 8637 * If the cacheline is not an even multiple of 8638 * the S/G size, we may only get a partial S/G when 8639 * we align. Add a cacheline if this is the case. 8640 */ 8641 if ((sg_prefetch_align % sg_size) != 0 8642 && (sg_prefetch_cnt < CCSGADDR_MAX)) 8643 sg_prefetch_cnt += sg_prefetch_align; 8644 /* 8645 * Lastly, compute a value that the sequencer can use 8646 * to determine if the remainder of the CCSGRAM buffer 8647 * has a full S/G element in it. 8648 */ 8649 sg_prefetch_cnt_limit = -(sg_prefetch_cnt - sg_size + 1); 8650 download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt; 8651 download_consts[SG_PREFETCH_CNT_LIMIT] = sg_prefetch_cnt_limit; 8652 download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_align - 1); 8653 download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_align - 1); 8654 download_consts[SG_SIZEOF] = sg_size; 8655 download_consts[PKT_OVERRUN_BUFOFFSET] = 8656 (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256; 8657 download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN; 8658 download_consts[CACHELINE_MASK] = cacheline_mask; 8659 cur_patch = patches; 8660 downloaded = 0; 8661 skip_addr = 0; 8662 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8663 ahd_outw(ahd, PRGMCNT, 0); 8664 8665 for (i = 0; i < sizeof(seqprog)/4; i++) { 8666 if (ahd_check_patch(ahd, &cur_patch, i, &skip_addr) == 0) { 8667 /* 8668 * Don't download this instruction as it 8669 * is in a patch that was removed. 8670 */ 8671 continue; 8672 } 8673 /* 8674 * Move through the CS table until we find a CS 8675 * that might apply to this instruction. 8676 */ 8677 for (; cur_cs < num_critical_sections; cur_cs++) { 8678 if (critical_sections[cur_cs].end <= i) { 8679 if (begin_set[cs_count] == TRUE 8680 && end_set[cs_count] == FALSE) { 8681 cs_table[cs_count].end = downloaded; 8682 end_set[cs_count] = TRUE; 8683 cs_count++; 8684 } 8685 continue; 8686 } 8687 if (critical_sections[cur_cs].begin <= i 8688 && begin_set[cs_count] == FALSE) { 8689 cs_table[cs_count].begin = downloaded; 8690 begin_set[cs_count] = TRUE; 8691 } 8692 break; 8693 } 8694 ahd_download_instr(ahd, i, download_consts); 8695 downloaded++; 8696 } 8697 8698 ahd->num_critical_sections = cs_count; 8699 if (cs_count != 0) { 8700 cs_count *= sizeof(struct cs); 8701 ahd->critical_sections = malloc(cs_count, M_DEVBUF, M_NOWAIT); 8702 if (ahd->critical_sections == NULL) 8703 panic("ahd_loadseq: Could not malloc"); 8704 memcpy(ahd->critical_sections, cs_table, cs_count); 8705 } 8706 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE); 8707 8708 if (bootverbose) { 8709 printf(" %d instructions downloaded\n", downloaded); 8710 printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n", 8711 ahd_name(ahd), ahd->features, ahd->bugs, ahd->flags); 8712 } 8713 } 8714 8715 static int 8716 ahd_check_patch(struct ahd_softc *ahd, struct patch **start_patch, 8717 u_int start_instr, u_int *skip_addr) 8718 { 8719 struct patch *cur_patch; 8720 struct patch *last_patch; 8721 u_int num_patches; 8722 8723 num_patches = sizeof(patches)/sizeof(struct patch); 8724 last_patch = &patches[num_patches]; 8725 cur_patch = *start_patch; 8726 8727 while (cur_patch < last_patch && start_instr == cur_patch->begin) { 8728 if (cur_patch->patch_func(ahd) == 0) { 8729 /* Start rejecting code */ 8730 *skip_addr = start_instr + cur_patch->skip_instr; 8731 cur_patch += cur_patch->skip_patch; 8732 } else { 8733 /* Accepted this patch. Advance to the next 8734 * one and wait for our instruction pointer to 8735 * hit this point. 8736 */ 8737 cur_patch++; 8738 } 8739 } 8740 8741 *start_patch = cur_patch; 8742 if (start_instr < *skip_addr) 8743 /* Still skipping */ 8744 return (0); 8745 8746 return (1); 8747 } 8748 8749 static u_int 8750 ahd_resolve_seqaddr(struct ahd_softc *ahd, u_int address) 8751 { 8752 struct patch *cur_patch; 8753 int address_offset; 8754 u_int skip_addr; 8755 u_int i; 8756 8757 address_offset = 0; 8758 cur_patch = patches; 8759 skip_addr = 0; 8760 8761 for (i = 0; i < address;) { 8762 ahd_check_patch(ahd, &cur_patch, i, &skip_addr); 8763 8764 if (skip_addr > i) { 8765 int end_addr; 8766 8767 end_addr = MIN(address, skip_addr); 8768 address_offset += end_addr - i; 8769 i = skip_addr; 8770 } else { 8771 i++; 8772 } 8773 } 8774 return (address - address_offset); 8775 } 8776 8777 static void 8778 ahd_download_instr(struct ahd_softc *ahd, u_int instrptr, uint8_t *dconsts) 8779 { 8780 union ins_formats instr; 8781 struct ins_format1 *fmt1_ins; 8782 struct ins_format3 *fmt3_ins; 8783 u_int opcode; 8784 8785 /* 8786 * The firmware is always compiled into a little endian format. 8787 */ 8788 instr.integer = aic_le32toh(*(uint32_t*)&seqprog[instrptr * 4]); 8789 8790 fmt1_ins = &instr.format1; 8791 fmt3_ins = NULL; 8792 8793 /* Pull the opcode */ 8794 opcode = instr.format1.opcode; 8795 switch (opcode) { 8796 case AIC_OP_JMP: 8797 case AIC_OP_JC: 8798 case AIC_OP_JNC: 8799 case AIC_OP_CALL: 8800 case AIC_OP_JNE: 8801 case AIC_OP_JNZ: 8802 case AIC_OP_JE: 8803 case AIC_OP_JZ: 8804 { 8805 fmt3_ins = &instr.format3; 8806 fmt3_ins->address = ahd_resolve_seqaddr(ahd, fmt3_ins->address); 8807 /* FALLTHROUGH */ 8808 } 8809 case AIC_OP_OR: 8810 case AIC_OP_AND: 8811 case AIC_OP_XOR: 8812 case AIC_OP_ADD: 8813 case AIC_OP_ADC: 8814 case AIC_OP_BMOV: 8815 if (fmt1_ins->parity != 0) { 8816 fmt1_ins->immediate = dconsts[fmt1_ins->immediate]; 8817 } 8818 fmt1_ins->parity = 0; 8819 /* FALLTHROUGH */ 8820 case AIC_OP_ROL: 8821 { 8822 int i, count; 8823 8824 /* Calculate odd parity for the instruction */ 8825 for (i = 0, count = 0; i < 31; i++) { 8826 uint32_t mask; 8827 8828 mask = 0x01 << i; 8829 if ((instr.integer & mask) != 0) 8830 count++; 8831 } 8832 if ((count & 0x01) == 0) 8833 instr.format1.parity = 1; 8834 8835 /* The sequencer is a little endian cpu */ 8836 instr.integer = aic_htole32(instr.integer); 8837 ahd_outsb(ahd, SEQRAM, instr.bytes, 4); 8838 break; 8839 } 8840 default: 8841 panic("Unknown opcode encountered in seq program"); 8842 break; 8843 } 8844 } 8845 8846 static int 8847 ahd_probe_stack_size(struct ahd_softc *ahd) 8848 { 8849 int last_probe; 8850 8851 last_probe = 0; 8852 while (1) { 8853 int i; 8854 8855 /* 8856 * We avoid using 0 as a pattern to avoid 8857 * confusion if the stack implementation 8858 * "back-fills" with zeros when "poping' 8859 * entries. 8860 */ 8861 for (i = 1; i <= last_probe+1; i++) { 8862 ahd_outb(ahd, STACK, i & 0xFF); 8863 ahd_outb(ahd, STACK, (i >> 8) & 0xFF); 8864 } 8865 8866 /* Verify */ 8867 for (i = last_probe+1; i > 0; i--) { 8868 u_int stack_entry; 8869 8870 stack_entry = ahd_inb(ahd, STACK) 8871 |(ahd_inb(ahd, STACK) << 8); 8872 if (stack_entry != i) 8873 goto sized; 8874 } 8875 last_probe++; 8876 } 8877 sized: 8878 return (last_probe); 8879 } 8880 8881 void 8882 ahd_dump_all_cards_state(void) 8883 { 8884 struct ahd_softc *list_ahd; 8885 8886 TAILQ_FOREACH(list_ahd, &ahd_tailq, links) { 8887 ahd_dump_card_state(list_ahd); 8888 } 8889 } 8890 8891 int 8892 ahd_print_register(ahd_reg_parse_entry_t *table, u_int num_entries, 8893 const char *name, u_int address, u_int value, 8894 u_int *cur_column, u_int wrap_point) 8895 { 8896 int printed; 8897 u_int printed_mask; 8898 u_int dummy_column; 8899 8900 if (cur_column == NULL) { 8901 dummy_column = 0; 8902 cur_column = &dummy_column; 8903 } 8904 8905 if (cur_column != NULL && *cur_column >= wrap_point) { 8906 printf("\n"); 8907 *cur_column = 0; 8908 } 8909 printed = printf("%s[0x%x]", name, value); 8910 if (table == NULL) { 8911 printed += printf(" "); 8912 *cur_column += printed; 8913 return (printed); 8914 } 8915 printed_mask = 0; 8916 while (printed_mask != 0xFF) { 8917 int entry; 8918 8919 for (entry = 0; entry < num_entries; entry++) { 8920 if (((value & table[entry].mask) 8921 != table[entry].value) 8922 || ((printed_mask & table[entry].mask) 8923 == table[entry].mask)) 8924 continue; 8925 8926 printed += printf("%s%s", 8927 printed_mask == 0 ? ":(" : "|", 8928 table[entry].name); 8929 printed_mask |= table[entry].mask; 8930 8931 break; 8932 } 8933 if (entry >= num_entries) 8934 break; 8935 } 8936 if (printed_mask != 0) 8937 printed += printf(") "); 8938 else 8939 printed += printf(" "); 8940 *cur_column += printed; 8941 return (printed); 8942 } 8943 8944 void 8945 ahd_dump_card_state(struct ahd_softc *ahd) 8946 { 8947 struct scb *scb; 8948 ahd_mode_state saved_modes; 8949 u_int dffstat; 8950 int paused; 8951 u_int scb_index; 8952 u_int saved_scb_index; 8953 u_int cur_col; 8954 int i; 8955 8956 if (ahd_is_paused(ahd)) { 8957 paused = 1; 8958 } else { 8959 paused = 0; 8960 ahd_pause(ahd); 8961 } 8962 saved_modes = ahd_save_modes(ahd); 8963 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8964 printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n" 8965 "%s: Dumping Card State at program address 0x%x Mode 0x%x\n", 8966 ahd_name(ahd), 8967 ahd_inw(ahd, CURADDR), 8968 ahd_build_mode_state(ahd, ahd->saved_src_mode, 8969 ahd->saved_dst_mode)); 8970 if (paused) 8971 printf("Card was paused\n"); 8972 8973 if (ahd_check_cmdcmpltqueues(ahd)) 8974 printf("Completions are pending\n"); 8975 8976 /* 8977 * Mode independent registers. 8978 */ 8979 cur_col = 0; 8980 ahd_intstat_print(ahd_inb(ahd, INTSTAT), &cur_col, 50); 8981 ahd_seloid_print(ahd_inb(ahd, SELOID), &cur_col, 50); 8982 ahd_selid_print(ahd_inb(ahd, SELID), &cur_col, 50); 8983 ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50); 8984 ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50); 8985 ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50); 8986 ahd_saved_mode_print(ahd_inb(ahd, SAVED_MODE), &cur_col, 50); 8987 ahd_dffstat_print(ahd_inb(ahd, DFFSTAT), &cur_col, 50); 8988 ahd_scsisigi_print(ahd_inb(ahd, SCSISIGI), &cur_col, 50); 8989 ahd_scsiphase_print(ahd_inb(ahd, SCSIPHASE), &cur_col, 50); 8990 ahd_scsibus_print(ahd_inb(ahd, SCSIBUS), &cur_col, 50); 8991 ahd_lastphase_print(ahd_inb(ahd, LASTPHASE), &cur_col, 50); 8992 ahd_scsiseq0_print(ahd_inb(ahd, SCSISEQ0), &cur_col, 50); 8993 ahd_scsiseq1_print(ahd_inb(ahd, SCSISEQ1), &cur_col, 50); 8994 ahd_seqctl0_print(ahd_inb(ahd, SEQCTL0), &cur_col, 50); 8995 ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50); 8996 ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50); 8997 ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50); 8998 ahd_qfreeze_count_print(ahd_inw(ahd, QFREEZE_COUNT), &cur_col, 50); 8999 ahd_kernel_qfreeze_count_print(ahd_inw(ahd, KERNEL_QFREEZE_COUNT), 9000 &cur_col, 50); 9001 ahd_mk_message_scb_print(ahd_inw(ahd, MK_MESSAGE_SCB), &cur_col, 50); 9002 ahd_mk_message_scsiid_print(ahd_inb(ahd, MK_MESSAGE_SCSIID), 9003 &cur_col, 50); 9004 ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50); 9005 ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50); 9006 ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50); 9007 ahd_sstat3_print(ahd_inb(ahd, SSTAT3), &cur_col, 50); 9008 ahd_perrdiag_print(ahd_inb(ahd, PERRDIAG), &cur_col, 50); 9009 ahd_simode1_print(ahd_inb(ahd, SIMODE1), &cur_col, 50); 9010 ahd_lqistat0_print(ahd_inb(ahd, LQISTAT0), &cur_col, 50); 9011 ahd_lqistat1_print(ahd_inb(ahd, LQISTAT1), &cur_col, 50); 9012 ahd_lqistat2_print(ahd_inb(ahd, LQISTAT2), &cur_col, 50); 9013 ahd_lqostat0_print(ahd_inb(ahd, LQOSTAT0), &cur_col, 50); 9014 ahd_lqostat1_print(ahd_inb(ahd, LQOSTAT1), &cur_col, 50); 9015 ahd_lqostat2_print(ahd_inb(ahd, LQOSTAT2), &cur_col, 50); 9016 printf("\n"); 9017 printf("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x " 9018 "CURRSCB 0x%x NEXTSCB 0x%x\n", 9019 ahd->scb_data.numscbs, ahd_inw(ahd, CMDS_PENDING), 9020 ahd_inw(ahd, LASTSCB), ahd_inw(ahd, CURRSCB), 9021 ahd_inw(ahd, NEXTSCB)); 9022 cur_col = 0; 9023 /* QINFIFO */ 9024 ahd_search_qinfifo(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 9025 CAM_LUN_WILDCARD, SCB_LIST_NULL, 9026 ROLE_UNKNOWN, /*status*/0, SEARCH_PRINT); 9027 saved_scb_index = ahd_get_scbptr(ahd); 9028 printf("Pending list:"); 9029 i = 0; 9030 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 9031 if (i++ > AHD_SCB_MAX) 9032 break; 9033 cur_col = printf("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb), 9034 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT)); 9035 ahd_set_scbptr(ahd, SCB_GET_TAG(scb)); 9036 ahd_scb_control_print(ahd_inb_scbram(ahd, SCB_CONTROL), 9037 &cur_col, 60); 9038 ahd_scb_scsiid_print(ahd_inb_scbram(ahd, SCB_SCSIID), 9039 &cur_col, 60); 9040 } 9041 printf("\nTotal %d\n", i); 9042 9043 printf("Kernel Free SCB lists: "); 9044 i = 0; 9045 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 9046 struct scb *list_scb; 9047 9048 printf("\n COLIDX[%d]: ", AHD_GET_SCB_COL_IDX(ahd, scb)); 9049 list_scb = scb; 9050 do { 9051 printf("%d ", SCB_GET_TAG(list_scb)); 9052 list_scb = LIST_NEXT(list_scb, collision_links); 9053 } while (list_scb && i++ < AHD_SCB_MAX); 9054 } 9055 9056 printf("\n Any Device: "); 9057 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 9058 if (i++ > AHD_SCB_MAX) 9059 break; 9060 printf("%d ", SCB_GET_TAG(scb)); 9061 } 9062 printf("\n"); 9063 9064 printf("Sequencer Complete DMA-inprog list: "); 9065 scb_index = ahd_inw(ahd, COMPLETE_SCB_DMAINPROG_HEAD); 9066 i = 0; 9067 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9068 ahd_set_scbptr(ahd, scb_index); 9069 printf("%d ", scb_index); 9070 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9071 } 9072 printf("\n"); 9073 9074 printf("Sequencer Complete list: "); 9075 scb_index = ahd_inw(ahd, COMPLETE_SCB_HEAD); 9076 i = 0; 9077 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9078 ahd_set_scbptr(ahd, scb_index); 9079 printf("%d ", scb_index); 9080 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9081 } 9082 printf("\n"); 9083 9084 printf("Sequencer DMA-Up and Complete list: "); 9085 scb_index = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 9086 i = 0; 9087 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9088 ahd_set_scbptr(ahd, scb_index); 9089 printf("%d ", scb_index); 9090 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9091 } 9092 printf("\n"); 9093 printf("Sequencer On QFreeze and Complete list: "); 9094 scb_index = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); 9095 i = 0; 9096 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9097 ahd_set_scbptr(ahd, scb_index); 9098 printf("%d ", scb_index); 9099 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9100 } 9101 printf("\n"); 9102 ahd_set_scbptr(ahd, saved_scb_index); 9103 dffstat = ahd_inb(ahd, DFFSTAT); 9104 for (i = 0; i < 2; i++) { 9105 #ifdef AHD_DEBUG 9106 struct scb *fifo_scb; 9107 #endif 9108 u_int fifo_scbptr; 9109 9110 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 9111 fifo_scbptr = ahd_get_scbptr(ahd); 9112 printf("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n", 9113 ahd_name(ahd), i, 9114 (dffstat & (FIFO0FREE << i)) ? "Free" : "Active", 9115 ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr); 9116 cur_col = 0; 9117 ahd_seqimode_print(ahd_inb(ahd, SEQIMODE), &cur_col, 50); 9118 ahd_seqintsrc_print(ahd_inb(ahd, SEQINTSRC), &cur_col, 50); 9119 ahd_dfcntrl_print(ahd_inb(ahd, DFCNTRL), &cur_col, 50); 9120 ahd_dfstatus_print(ahd_inb(ahd, DFSTATUS), &cur_col, 50); 9121 ahd_sg_cache_shadow_print(ahd_inb(ahd, SG_CACHE_SHADOW), 9122 &cur_col, 50); 9123 ahd_sg_state_print(ahd_inb(ahd, SG_STATE), &cur_col, 50); 9124 ahd_dffsxfrctl_print(ahd_inb(ahd, DFFSXFRCTL), &cur_col, 50); 9125 ahd_soffcnt_print(ahd_inb(ahd, SOFFCNT), &cur_col, 50); 9126 ahd_mdffstat_print(ahd_inb(ahd, MDFFSTAT), &cur_col, 50); 9127 if (cur_col > 50) { 9128 printf("\n"); 9129 cur_col = 0; 9130 } 9131 cur_col += printf("SHADDR = 0x%x%x, SHCNT = 0x%x ", 9132 ahd_inl(ahd, SHADDR+4), 9133 ahd_inl(ahd, SHADDR), 9134 (ahd_inb(ahd, SHCNT) 9135 | (ahd_inb(ahd, SHCNT + 1) << 8) 9136 | (ahd_inb(ahd, SHCNT + 2) << 16))); 9137 if (cur_col > 50) { 9138 printf("\n"); 9139 cur_col = 0; 9140 } 9141 cur_col += printf("HADDR = 0x%x%x, HCNT = 0x%x ", 9142 ahd_inl(ahd, HADDR+4), 9143 ahd_inl(ahd, HADDR), 9144 (ahd_inb(ahd, HCNT) 9145 | (ahd_inb(ahd, HCNT + 1) << 8) 9146 | (ahd_inb(ahd, HCNT + 2) << 16))); 9147 ahd_ccsgctl_print(ahd_inb(ahd, CCSGCTL), &cur_col, 50); 9148 #ifdef AHD_DEBUG 9149 if ((ahd_debug & AHD_SHOW_SG) != 0) { 9150 fifo_scb = ahd_lookup_scb(ahd, fifo_scbptr); 9151 if (fifo_scb != NULL) 9152 ahd_dump_sglist(fifo_scb); 9153 } 9154 #endif 9155 } 9156 printf("\nLQIN: "); 9157 for (i = 0; i < 20; i++) 9158 printf("0x%x ", ahd_inb(ahd, LQIN + i)); 9159 printf("\n"); 9160 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 9161 printf("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n", 9162 ahd_name(ahd), ahd_inb(ahd, LQISTATE), ahd_inb(ahd, LQOSTATE), 9163 ahd_inb(ahd, OPTIONMODE)); 9164 printf("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n", 9165 ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT), 9166 ahd_inb(ahd, MAXCMDCNT)); 9167 printf("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n", 9168 ahd_name(ahd), ahd_inb(ahd, SAVED_SCSIID), 9169 ahd_inb(ahd, SAVED_LUN)); 9170 ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50); 9171 printf("\n"); 9172 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 9173 cur_col = 0; 9174 ahd_ccscbctl_print(ahd_inb(ahd, CCSCBCTL), &cur_col, 50); 9175 printf("\n"); 9176 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 9177 printf("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n", 9178 ahd_name(ahd), ahd_inw(ahd, REG0), ahd_inw(ahd, SINDEX), 9179 ahd_inw(ahd, DINDEX)); 9180 printf("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n", 9181 ahd_name(ahd), ahd_get_scbptr(ahd), 9182 ahd_inw_scbram(ahd, SCB_NEXT), 9183 ahd_inw_scbram(ahd, SCB_NEXT2)); 9184 printf("CDB %x %x %x %x %x %x\n", 9185 ahd_inb_scbram(ahd, SCB_CDB_STORE), 9186 ahd_inb_scbram(ahd, SCB_CDB_STORE+1), 9187 ahd_inb_scbram(ahd, SCB_CDB_STORE+2), 9188 ahd_inb_scbram(ahd, SCB_CDB_STORE+3), 9189 ahd_inb_scbram(ahd, SCB_CDB_STORE+4), 9190 ahd_inb_scbram(ahd, SCB_CDB_STORE+5)); 9191 printf("STACK:"); 9192 for (i = 0; i < ahd->stack_size; i++) { 9193 ahd->saved_stack[i] = 9194 ahd_inb(ahd, STACK)|(ahd_inb(ahd, STACK) << 8); 9195 printf(" 0x%x", ahd->saved_stack[i]); 9196 } 9197 for (i = ahd->stack_size-1; i >= 0; i--) { 9198 ahd_outb(ahd, STACK, ahd->saved_stack[i] & 0xFF); 9199 ahd_outb(ahd, STACK, (ahd->saved_stack[i] >> 8) & 0xFF); 9200 } 9201 printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n"); 9202 ahd_platform_dump_card_state(ahd); 9203 ahd_restore_modes(ahd, saved_modes); 9204 if (paused == 0) 9205 ahd_unpause(ahd); 9206 } 9207 9208 void 9209 ahd_dump_scbs(struct ahd_softc *ahd) 9210 { 9211 ahd_mode_state saved_modes; 9212 u_int saved_scb_index; 9213 int i; 9214 9215 saved_modes = ahd_save_modes(ahd); 9216 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9217 saved_scb_index = ahd_get_scbptr(ahd); 9218 for (i = 0; i < AHD_SCB_MAX; i++) { 9219 ahd_set_scbptr(ahd, i); 9220 printf("%3d", i); 9221 printf("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n", 9222 ahd_inb_scbram(ahd, SCB_CONTROL), 9223 ahd_inb_scbram(ahd, SCB_SCSIID), 9224 ahd_inw_scbram(ahd, SCB_NEXT), 9225 ahd_inw_scbram(ahd, SCB_NEXT2), 9226 ahd_inl_scbram(ahd, SCB_SGPTR), 9227 ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR)); 9228 } 9229 printf("\n"); 9230 ahd_set_scbptr(ahd, saved_scb_index); 9231 ahd_restore_modes(ahd, saved_modes); 9232 } 9233 9234 /*************************** Timeout Handling *********************************/ 9235 void 9236 ahd_timeout(struct scb *scb) 9237 { 9238 struct ahd_softc *ahd; 9239 9240 ahd = scb->ahd_softc; 9241 if ((scb->flags & SCB_ACTIVE) != 0) { 9242 if ((scb->flags & SCB_TIMEDOUT) == 0) { 9243 LIST_INSERT_HEAD(&ahd->timedout_scbs, scb, 9244 timedout_links); 9245 scb->flags |= SCB_TIMEDOUT; 9246 } 9247 ahd_wakeup_recovery_thread(ahd); 9248 } 9249 } 9250 9251 /* 9252 * ahd_recover_commands determines if any of the commands that have currently 9253 * timedout are the root cause for this timeout. Innocent commands are given 9254 * a new timeout while we wait for the command executing on the bus to timeout. 9255 * This routine is invoked from a thread context so we are allowed to sleep. 9256 * Our lock is not held on entry. 9257 */ 9258 void 9259 ahd_recover_commands(struct ahd_softc *ahd) 9260 { 9261 struct scb *scb; 9262 struct scb *active_scb; 9263 int found; 9264 int was_paused; 9265 u_int active_scbptr; 9266 u_int last_phase; 9267 9268 /* 9269 * Pause the controller and manually flush any 9270 * commands that have just completed but that our 9271 * interrupt handler has yet to see. 9272 */ 9273 was_paused = ahd_is_paused(ahd); 9274 9275 printf("%s: Recovery Initiated - Card was %spaused\n", ahd_name(ahd), 9276 was_paused ? "" : "not "); 9277 AHD_CORRECTABLE_ERROR(ahd); 9278 ahd_dump_card_state(ahd); 9279 9280 ahd_pause_and_flushwork(ahd); 9281 9282 if (LIST_EMPTY(&ahd->timedout_scbs) != 0) { 9283 /* 9284 * The timedout commands have already 9285 * completed. This typically means 9286 * that either the timeout value was on 9287 * the hairy edge of what the device 9288 * requires or - more likely - interrupts 9289 * are not happening. 9290 */ 9291 printf("%s: Timedout SCBs already complete. " 9292 "Interrupts may not be functioning.\n", ahd_name(ahd)); 9293 ahd_unpause(ahd); 9294 return; 9295 } 9296 9297 /* 9298 * Determine identity of SCB acting on the bus. 9299 * This test only catches non-packetized transactions. 9300 * Due to the fleeting nature of packetized operations, 9301 * we can't easily determine that a packetized operation 9302 * is on the bus. 9303 */ 9304 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9305 last_phase = ahd_inb(ahd, LASTPHASE); 9306 active_scbptr = ahd_get_scbptr(ahd); 9307 active_scb = NULL; 9308 if (last_phase != P_BUSFREE 9309 || (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) 9310 active_scb = ahd_lookup_scb(ahd, active_scbptr); 9311 9312 while ((scb = LIST_FIRST(&ahd->timedout_scbs)) != NULL) { 9313 int target; 9314 int lun; 9315 char channel; 9316 9317 target = SCB_GET_TARGET(ahd, scb); 9318 channel = SCB_GET_CHANNEL(ahd, scb); 9319 lun = SCB_GET_LUN(scb); 9320 9321 ahd_print_path(ahd, scb); 9322 printf("SCB %d - timed out\n", SCB_GET_TAG(scb)); 9323 9324 if (scb->flags & (SCB_DEVICE_RESET|SCB_ABORT)) { 9325 /* 9326 * Been down this road before. 9327 * Do a full bus reset. 9328 */ 9329 aic_set_transaction_status(scb, CAM_CMD_TIMEOUT); 9330 bus_reset: 9331 found = ahd_reset_channel(ahd, channel, 9332 /*Initiate Reset*/TRUE); 9333 printf("%s: Issued Channel %c Bus Reset. " 9334 "%d SCBs aborted\n", ahd_name(ahd), channel, 9335 found); 9336 continue; 9337 } 9338 9339 /* 9340 * Remove the command from the timedout list in 9341 * preparation for requeing it. 9342 */ 9343 LIST_REMOVE(scb, timedout_links); 9344 scb->flags &= ~SCB_TIMEDOUT; 9345 9346 if (active_scb != NULL) { 9347 if (active_scb != scb) { 9348 /* 9349 * If the active SCB is not us, assume that 9350 * the active SCB has a longer timeout than 9351 * the timedout SCB, and wait for the active 9352 * SCB to timeout. As a safeguard, only 9353 * allow this deferral to continue if some 9354 * untimed-out command is outstanding. 9355 */ 9356 if (ahd_other_scb_timeout(ahd, scb, 9357 active_scb) == 0) 9358 goto bus_reset; 9359 continue; 9360 } 9361 9362 /* 9363 * We're active on the bus, so assert ATN 9364 * and hope that the target responds. 9365 */ 9366 ahd_set_recoveryscb(ahd, active_scb); 9367 active_scb->flags |= SCB_RECOVERY_SCB|SCB_DEVICE_RESET; 9368 ahd_outb(ahd, MSG_OUT, HOST_MSG); 9369 ahd_outb(ahd, SCSISIGO, last_phase|ATNO); 9370 ahd_print_path(ahd, active_scb); 9371 printf("BDR message in message buffer\n"); 9372 aic_scb_timer_reset(scb, 2 * 1000); 9373 break; 9374 } else if (last_phase != P_BUSFREE 9375 && ahd_inb(ahd, SCSIPHASE) == 0) { 9376 /* 9377 * SCB is not identified, there 9378 * is no pending REQ, and the sequencer 9379 * has not seen a busfree. Looks like 9380 * a stuck connection waiting to 9381 * go busfree. Reset the bus. 9382 */ 9383 printf("%s: Connection stuck awaiting busfree or " 9384 "Identify Msg.\n", ahd_name(ahd)); 9385 goto bus_reset; 9386 } else if (ahd_search_qinfifo(ahd, target, channel, lun, 9387 SCB_GET_TAG(scb), 9388 ROLE_INITIATOR, /*status*/0, 9389 SEARCH_COUNT) > 0) { 9390 /* 9391 * We haven't even gone out on the bus 9392 * yet, so the timeout must be due to 9393 * some other command. Reset the timer 9394 * and go on. 9395 */ 9396 if (ahd_other_scb_timeout(ahd, scb, NULL) == 0) 9397 goto bus_reset; 9398 } else { 9399 /* 9400 * This SCB is for a disconnected transaction 9401 * and we haven't found a better candidate on 9402 * the bus to explain this timeout. 9403 */ 9404 ahd_set_recoveryscb(ahd, scb); 9405 9406 /* 9407 * Actually re-queue this SCB in an attempt 9408 * to select the device before it reconnects. 9409 * In either case (selection or reselection), 9410 * we will now issue a target reset to the 9411 * timed-out device. 9412 */ 9413 scb->flags |= SCB_DEVICE_RESET; 9414 scb->hscb->cdb_len = 0; 9415 scb->hscb->task_attribute = 0; 9416 scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK; 9417 9418 ahd_set_scbptr(ahd, SCB_GET_TAG(scb)); 9419 if ((scb->flags & SCB_PACKETIZED) != 0) { 9420 /* 9421 * Mark the SCB has having an outstanding 9422 * task management function. Should the command 9423 * complete normally before the task management 9424 * function can be sent, the host will be 9425 * notified to abort our requeued SCB. 9426 */ 9427 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 9428 scb->hscb->task_management); 9429 } else { 9430 /* 9431 * If non-packetized, set the MK_MESSAGE control 9432 * bit indicating that we desire to send a 9433 * message. We also set the disconnected flag 9434 * since there is no guarantee that our SCB 9435 * control byte matches the version on the 9436 * card. We don't want the sequencer to abort 9437 * the command thinking an unsolicited 9438 * reselection occurred. 9439 */ 9440 scb->hscb->control |= MK_MESSAGE|DISCONNECTED; 9441 9442 /* 9443 * The sequencer will never re-reference the 9444 * in-core SCB. To make sure we are notified 9445 * during reslection, set the MK_MESSAGE flag in 9446 * the card's copy of the SCB. 9447 */ 9448 ahd_outb(ahd, SCB_CONTROL, 9449 ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE); 9450 } 9451 9452 /* 9453 * Clear out any entries in the QINFIFO first 9454 * so we are the next SCB for this target 9455 * to run. 9456 */ 9457 ahd_search_qinfifo(ahd, target, channel, lun, 9458 SCB_LIST_NULL, ROLE_INITIATOR, 9459 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 9460 ahd_qinfifo_requeue_tail(ahd, scb); 9461 ahd_set_scbptr(ahd, active_scbptr); 9462 ahd_print_path(ahd, scb); 9463 printf("Queuing a BDR SCB\n"); 9464 aic_scb_timer_reset(scb, 2 * 1000); 9465 break; 9466 } 9467 } 9468 9469 /* 9470 * Any remaining SCBs were not the "culprit", so remove 9471 * them from the timeout list. The timer for these commands 9472 * will be reset once the recovery SCB completes. 9473 */ 9474 while ((scb = LIST_FIRST(&ahd->timedout_scbs)) != NULL) { 9475 LIST_REMOVE(scb, timedout_links); 9476 scb->flags &= ~SCB_TIMEDOUT; 9477 } 9478 9479 ahd_unpause(ahd); 9480 } 9481 9482 /* 9483 * Re-schedule a timeout for the passed in SCB if we determine that some 9484 * other SCB is in the process of recovery or an SCB with a longer 9485 * timeout is still pending. Limit our search to just "other_scb" 9486 * if it is non-NULL. 9487 */ 9488 static int 9489 ahd_other_scb_timeout(struct ahd_softc *ahd, struct scb *scb, 9490 struct scb *other_scb) 9491 { 9492 u_int newtimeout; 9493 int found; 9494 9495 ahd_print_path(ahd, scb); 9496 printf("Other SCB Timeout%s", 9497 (scb->flags & SCB_OTHERTCL_TIMEOUT) != 0 9498 ? " again\n" : "\n"); 9499 9500 AHD_UNCORRECTABLE_ERROR(ahd); 9501 newtimeout = aic_get_timeout(scb); 9502 scb->flags |= SCB_OTHERTCL_TIMEOUT; 9503 found = 0; 9504 if (other_scb != NULL) { 9505 if ((other_scb->flags 9506 & (SCB_OTHERTCL_TIMEOUT|SCB_TIMEDOUT)) == 0 9507 || (other_scb->flags & SCB_RECOVERY_SCB) != 0) { 9508 found++; 9509 newtimeout = MAX(aic_get_timeout(other_scb), 9510 newtimeout); 9511 } 9512 } else { 9513 LIST_FOREACH(other_scb, &ahd->pending_scbs, pending_links) { 9514 if ((other_scb->flags 9515 & (SCB_OTHERTCL_TIMEOUT|SCB_TIMEDOUT)) == 0 9516 || (other_scb->flags & SCB_RECOVERY_SCB) != 0) { 9517 found++; 9518 newtimeout = MAX(aic_get_timeout(other_scb), 9519 newtimeout); 9520 } 9521 } 9522 } 9523 9524 if (found != 0) 9525 aic_scb_timer_reset(scb, newtimeout); 9526 else { 9527 ahd_print_path(ahd, scb); 9528 printf("No other SCB worth waiting for...\n"); 9529 } 9530 9531 return (found != 0); 9532 } 9533 9534 /**************************** Flexport Logic **********************************/ 9535 /* 9536 * Read count 16bit words from 16bit word address start_addr from the 9537 * SEEPROM attached to the controller, into buf, using the controller's 9538 * SEEPROM reading state machine. Optionally treat the data as a byte 9539 * stream in terms of byte order. 9540 */ 9541 int 9542 ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf, 9543 u_int start_addr, u_int count, int bytestream) 9544 { 9545 u_int cur_addr; 9546 u_int end_addr; 9547 int error; 9548 9549 /* 9550 * If we never make it through the loop even once, 9551 * we were passed invalid arguments. 9552 */ 9553 error = EINVAL; 9554 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9555 end_addr = start_addr + count; 9556 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 9557 ahd_outb(ahd, SEEADR, cur_addr); 9558 ahd_outb(ahd, SEECTL, SEEOP_READ | SEESTART); 9559 9560 error = ahd_wait_seeprom(ahd); 9561 if (error) 9562 break; 9563 if (bytestream != 0) { 9564 uint8_t *bytestream_ptr; 9565 9566 bytestream_ptr = (uint8_t *)buf; 9567 *bytestream_ptr++ = ahd_inb(ahd, SEEDAT); 9568 *bytestream_ptr = ahd_inb(ahd, SEEDAT+1); 9569 } else { 9570 /* 9571 * ahd_inw() already handles machine byte order. 9572 */ 9573 *buf = ahd_inw(ahd, SEEDAT); 9574 } 9575 buf++; 9576 } 9577 return (error); 9578 } 9579 9580 /* 9581 * Write count 16bit words from buf, into SEEPROM attache to the 9582 * controller starting at 16bit word address start_addr, using the 9583 * controller's SEEPROM writing state machine. 9584 */ 9585 int 9586 ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf, 9587 u_int start_addr, u_int count) 9588 { 9589 u_int cur_addr; 9590 u_int end_addr; 9591 int error; 9592 int retval; 9593 9594 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9595 error = ENOENT; 9596 9597 /* Place the chip into write-enable mode */ 9598 ahd_outb(ahd, SEEADR, SEEOP_EWEN_ADDR); 9599 ahd_outb(ahd, SEECTL, SEEOP_EWEN | SEESTART); 9600 error = ahd_wait_seeprom(ahd); 9601 if (error) 9602 return (error); 9603 9604 /* 9605 * Write the data. If we don't get through the loop at 9606 * least once, the arguments were invalid. 9607 */ 9608 retval = EINVAL; 9609 end_addr = start_addr + count; 9610 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 9611 ahd_outw(ahd, SEEDAT, *buf++); 9612 ahd_outb(ahd, SEEADR, cur_addr); 9613 ahd_outb(ahd, SEECTL, SEEOP_WRITE | SEESTART); 9614 9615 retval = ahd_wait_seeprom(ahd); 9616 if (retval) 9617 break; 9618 } 9619 9620 /* 9621 * Disable writes. 9622 */ 9623 ahd_outb(ahd, SEEADR, SEEOP_EWDS_ADDR); 9624 ahd_outb(ahd, SEECTL, SEEOP_EWDS | SEESTART); 9625 error = ahd_wait_seeprom(ahd); 9626 if (error) 9627 return (error); 9628 return (retval); 9629 } 9630 9631 /* 9632 * Wait ~100us for the serial eeprom to satisfy our request. 9633 */ 9634 int 9635 ahd_wait_seeprom(struct ahd_softc *ahd) 9636 { 9637 int cnt; 9638 9639 cnt = 5000; 9640 while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt) 9641 aic_delay(5); 9642 9643 if (cnt == 0) 9644 return (ETIMEDOUT); 9645 return (0); 9646 } 9647 9648 /* 9649 * Validate the two checksums in the per_channel 9650 * vital product data struct. 9651 */ 9652 int 9653 ahd_verify_vpd_cksum(struct vpd_config *vpd) 9654 { 9655 int i; 9656 int maxaddr; 9657 uint32_t checksum; 9658 uint8_t *vpdarray; 9659 9660 vpdarray = (uint8_t *)vpd; 9661 maxaddr = offsetof(struct vpd_config, vpd_checksum); 9662 checksum = 0; 9663 for (i = offsetof(struct vpd_config, resource_type); i < maxaddr; i++) 9664 checksum = checksum + vpdarray[i]; 9665 if (checksum == 0 9666 || (-checksum & 0xFF) != vpd->vpd_checksum) 9667 return (0); 9668 9669 checksum = 0; 9670 maxaddr = offsetof(struct vpd_config, checksum); 9671 for (i = offsetof(struct vpd_config, default_target_flags); 9672 i < maxaddr; i++) 9673 checksum = checksum + vpdarray[i]; 9674 if (checksum == 0 9675 || (-checksum & 0xFF) != vpd->checksum) 9676 return (0); 9677 return (1); 9678 } 9679 9680 int 9681 ahd_verify_cksum(struct seeprom_config *sc) 9682 { 9683 int i; 9684 int maxaddr; 9685 uint32_t checksum; 9686 uint16_t *scarray; 9687 9688 maxaddr = (sizeof(*sc)/2) - 1; 9689 checksum = 0; 9690 scarray = (uint16_t *)sc; 9691 9692 for (i = 0; i < maxaddr; i++) 9693 checksum = checksum + scarray[i]; 9694 if (checksum == 0 9695 || (checksum & 0xFFFF) != sc->checksum) { 9696 return (0); 9697 } else { 9698 return (1); 9699 } 9700 } 9701 9702 int 9703 ahd_acquire_seeprom(struct ahd_softc *ahd) 9704 { 9705 /* 9706 * We should be able to determine the SEEPROM type 9707 * from the flexport logic, but unfortunately not 9708 * all implementations have this logic and there is 9709 * no programatic method for determining if the logic 9710 * is present. 9711 */ 9712 return (1); 9713 #if 0 9714 uint8_t seetype; 9715 int error; 9716 9717 error = ahd_read_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, &seetype); 9718 if (error != 0 9719 || ((seetype & FLX_ROMSTAT_SEECFG) == FLX_ROMSTAT_SEE_NONE)) 9720 return (0); 9721 return (1); 9722 #endif 9723 } 9724 9725 void 9726 ahd_release_seeprom(struct ahd_softc *ahd) 9727 { 9728 /* Currently a no-op */ 9729 } 9730 9731 int 9732 ahd_write_flexport(struct ahd_softc *ahd, u_int addr, u_int value) 9733 { 9734 int error; 9735 9736 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9737 if (addr > 7) 9738 panic("ahd_write_flexport: address out of range"); 9739 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9740 error = ahd_wait_flexport(ahd); 9741 if (error != 0) 9742 return (error); 9743 ahd_outb(ahd, BRDDAT, value); 9744 ahd_flush_device_writes(ahd); 9745 ahd_outb(ahd, BRDCTL, BRDSTB|BRDEN|(addr << 3)); 9746 ahd_flush_device_writes(ahd); 9747 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9748 ahd_flush_device_writes(ahd); 9749 ahd_outb(ahd, BRDCTL, 0); 9750 ahd_flush_device_writes(ahd); 9751 return (0); 9752 } 9753 9754 int 9755 ahd_read_flexport(struct ahd_softc *ahd, u_int addr, uint8_t *value) 9756 { 9757 int error; 9758 9759 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9760 if (addr > 7) 9761 panic("ahd_read_flexport: address out of range"); 9762 ahd_outb(ahd, BRDCTL, BRDRW|BRDEN|(addr << 3)); 9763 error = ahd_wait_flexport(ahd); 9764 if (error != 0) 9765 return (error); 9766 *value = ahd_inb(ahd, BRDDAT); 9767 ahd_outb(ahd, BRDCTL, 0); 9768 ahd_flush_device_writes(ahd); 9769 return (0); 9770 } 9771 9772 /* 9773 * Wait at most 2 seconds for flexport arbitration to succeed. 9774 */ 9775 int 9776 ahd_wait_flexport(struct ahd_softc *ahd) 9777 { 9778 int cnt; 9779 9780 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9781 cnt = 1000000 * 2 / 5; 9782 while ((ahd_inb(ahd, BRDCTL) & FLXARBACK) == 0 && --cnt) 9783 aic_delay(5); 9784 9785 if (cnt == 0) 9786 return (ETIMEDOUT); 9787 return (0); 9788 } 9789 9790 /************************* Target Mode ****************************************/ 9791 #ifdef AHD_TARGET_MODE 9792 cam_status 9793 ahd_find_tmode_devs(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb, 9794 struct ahd_tmode_tstate **tstate, 9795 struct ahd_tmode_lstate **lstate, 9796 int notfound_failure) 9797 { 9798 9799 if ((ahd->features & AHD_TARGETMODE) == 0) 9800 return (CAM_REQ_INVALID); 9801 9802 /* 9803 * Handle the 'black hole' device that sucks up 9804 * requests to unattached luns on enabled targets. 9805 */ 9806 if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD 9807 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) { 9808 *tstate = NULL; 9809 *lstate = ahd->black_hole; 9810 } else { 9811 u_int max_id; 9812 9813 max_id = (ahd->features & AHD_WIDE) ? 15 : 7; 9814 if (ccb->ccb_h.target_id > max_id) 9815 return (CAM_TID_INVALID); 9816 9817 if (ccb->ccb_h.target_lun >= AHD_NUM_LUNS) 9818 return (CAM_LUN_INVALID); 9819 9820 *tstate = ahd->enabled_targets[ccb->ccb_h.target_id]; 9821 *lstate = NULL; 9822 if (*tstate != NULL) 9823 *lstate = 9824 (*tstate)->enabled_luns[ccb->ccb_h.target_lun]; 9825 } 9826 9827 if (notfound_failure != 0 && *lstate == NULL) 9828 return (CAM_PATH_INVALID); 9829 9830 return (CAM_REQ_CMP); 9831 } 9832 9833 void 9834 ahd_handle_en_lun(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb) 9835 { 9836 #if NOT_YET 9837 struct ahd_tmode_tstate *tstate; 9838 struct ahd_tmode_lstate *lstate; 9839 struct ccb_en_lun *cel; 9840 cam_status status; 9841 u_int target; 9842 u_int lun; 9843 u_int target_mask; 9844 u_long s; 9845 char channel; 9846 9847 status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate, &lstate, 9848 /*notfound_failure*/FALSE); 9849 9850 if (status != CAM_REQ_CMP) { 9851 ccb->ccb_h.status = status; 9852 return; 9853 } 9854 9855 if ((ahd->features & AHD_MULTIROLE) != 0) { 9856 u_int our_id; 9857 9858 our_id = ahd->our_id; 9859 if (ccb->ccb_h.target_id != our_id 9860 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 9861 if ((ahd->features & AHD_MULTI_TID) != 0 9862 && (ahd->flags & AHD_INITIATORROLE) != 0) { 9863 /* 9864 * Only allow additional targets if 9865 * the initiator role is disabled. 9866 * The hardware cannot handle a re-select-in 9867 * on the initiator id during a re-select-out 9868 * on a different target id. 9869 */ 9870 status = CAM_TID_INVALID; 9871 } else if ((ahd->flags & AHD_INITIATORROLE) != 0 9872 || ahd->enabled_luns > 0) { 9873 /* 9874 * Only allow our target id to change 9875 * if the initiator role is not configured 9876 * and there are no enabled luns which 9877 * are attached to the currently registered 9878 * scsi id. 9879 */ 9880 status = CAM_TID_INVALID; 9881 } 9882 } 9883 } 9884 9885 if (status != CAM_REQ_CMP) { 9886 ccb->ccb_h.status = status; 9887 return; 9888 } 9889 9890 /* 9891 * We now have an id that is valid. 9892 * If we aren't in target mode, switch modes. 9893 */ 9894 if ((ahd->flags & AHD_TARGETROLE) == 0 9895 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 9896 printf("Configuring Target Mode\n"); 9897 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 9898 ccb->ccb_h.status = CAM_BUSY; 9899 return; 9900 } 9901 ahd->flags |= AHD_TARGETROLE; 9902 if ((ahd->features & AHD_MULTIROLE) == 0) 9903 ahd->flags &= ~AHD_INITIATORROLE; 9904 ahd_pause(ahd); 9905 ahd_loadseq(ahd); 9906 ahd_restart(ahd); 9907 } 9908 cel = &ccb->cel; 9909 target = ccb->ccb_h.target_id; 9910 lun = ccb->ccb_h.target_lun; 9911 channel = SIM_CHANNEL(ahd, sim); 9912 target_mask = 0x01 << target; 9913 if (channel == 'B') 9914 target_mask <<= 8; 9915 9916 if (cel->enable != 0) { 9917 u_int scsiseq1; 9918 9919 /* Are we already enabled?? */ 9920 if (lstate != NULL) { 9921 xpt_print_path(ccb->ccb_h.path); 9922 printf("Lun already enabled\n"); 9923 AHD_CORRECTABLE_ERROR(ahd); 9924 ccb->ccb_h.status = CAM_LUN_ALRDY_ENA; 9925 return; 9926 } 9927 9928 if (cel->grp6_len != 0 9929 || cel->grp7_len != 0) { 9930 /* 9931 * Don't (yet?) support vendor 9932 * specific commands. 9933 */ 9934 ccb->ccb_h.status = CAM_REQ_INVALID; 9935 printf("Non-zero Group Codes\n"); 9936 return; 9937 } 9938 9939 /* 9940 * Seems to be okay. 9941 * Setup our data structures. 9942 */ 9943 if (target != CAM_TARGET_WILDCARD && tstate == NULL) { 9944 tstate = ahd_alloc_tstate(ahd, target, channel); 9945 if (tstate == NULL) { 9946 xpt_print_path(ccb->ccb_h.path); 9947 printf("Couldn't allocate tstate\n"); 9948 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9949 return; 9950 } 9951 } 9952 lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT); 9953 if (lstate == NULL) { 9954 xpt_print_path(ccb->ccb_h.path); 9955 printf("Couldn't allocate lstate\n"); 9956 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9957 return; 9958 } 9959 memset(lstate, 0, sizeof(*lstate)); 9960 status = xpt_create_path(&lstate->path, /*periph*/NULL, 9961 xpt_path_path_id(ccb->ccb_h.path), 9962 xpt_path_target_id(ccb->ccb_h.path), 9963 xpt_path_lun_id(ccb->ccb_h.path)); 9964 if (status != CAM_REQ_CMP) { 9965 free(lstate, M_DEVBUF); 9966 xpt_print_path(ccb->ccb_h.path); 9967 printf("Couldn't allocate path\n"); 9968 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9969 return; 9970 } 9971 SLIST_INIT(&lstate->accept_tios); 9972 SLIST_INIT(&lstate->immed_notifies); 9973 ahd_pause(ahd); 9974 if (target != CAM_TARGET_WILDCARD) { 9975 tstate->enabled_luns[lun] = lstate; 9976 ahd->enabled_luns++; 9977 9978 if ((ahd->features & AHD_MULTI_TID) != 0) { 9979 u_int targid_mask; 9980 9981 targid_mask = ahd_inw(ahd, TARGID); 9982 targid_mask |= target_mask; 9983 ahd_outw(ahd, TARGID, targid_mask); 9984 ahd_update_scsiid(ahd, targid_mask); 9985 } else { 9986 u_int our_id; 9987 char channel; 9988 9989 channel = SIM_CHANNEL(ahd, sim); 9990 our_id = SIM_SCSI_ID(ahd, sim); 9991 9992 /* 9993 * This can only happen if selections 9994 * are not enabled 9995 */ 9996 if (target != our_id) { 9997 u_int sblkctl; 9998 char cur_channel; 9999 int swap; 10000 10001 sblkctl = ahd_inb(ahd, SBLKCTL); 10002 cur_channel = (sblkctl & SELBUSB) 10003 ? 'B' : 'A'; 10004 if ((ahd->features & AHD_TWIN) == 0) 10005 cur_channel = 'A'; 10006 swap = cur_channel != channel; 10007 ahd->our_id = target; 10008 10009 if (swap) 10010 ahd_outb(ahd, SBLKCTL, 10011 sblkctl ^ SELBUSB); 10012 10013 ahd_outb(ahd, SCSIID, target); 10014 10015 if (swap) 10016 ahd_outb(ahd, SBLKCTL, sblkctl); 10017 } 10018 } 10019 } else 10020 ahd->black_hole = lstate; 10021 /* Allow select-in operations */ 10022 if (ahd->black_hole != NULL && ahd->enabled_luns > 0) { 10023 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 10024 scsiseq1 |= ENSELI; 10025 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 10026 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 10027 scsiseq1 |= ENSELI; 10028 ahd_outb(ahd, SCSISEQ1, scsiseq1); 10029 } 10030 ahd_unpause(ahd); 10031 ccb->ccb_h.status = CAM_REQ_CMP; 10032 xpt_print_path(ccb->ccb_h.path); 10033 printf("Lun now enabled for target mode\n"); 10034 } else { 10035 struct scb *scb; 10036 int i, empty; 10037 10038 if (lstate == NULL) { 10039 ccb->ccb_h.status = CAM_LUN_INVALID; 10040 return; 10041 } 10042 10043 ccb->ccb_h.status = CAM_REQ_CMP; 10044 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 10045 struct ccb_hdr *ccbh; 10046 10047 ccbh = &scb->io_ctx->ccb_h; 10048 if (ccbh->func_code == XPT_CONT_TARGET_IO 10049 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){ 10050 printf("CTIO pending\n"); 10051 ccb->ccb_h.status = CAM_REQ_INVALID; 10052 return; 10053 } 10054 } 10055 10056 if (SLIST_FIRST(&lstate->accept_tios) != NULL) { 10057 printf("ATIOs pending\n"); 10058 ccb->ccb_h.status = CAM_REQ_INVALID; 10059 } 10060 10061 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) { 10062 printf("INOTs pending\n"); 10063 ccb->ccb_h.status = CAM_REQ_INVALID; 10064 } 10065 10066 if (ccb->ccb_h.status != CAM_REQ_CMP) { 10067 return; 10068 } 10069 10070 xpt_print_path(ccb->ccb_h.path); 10071 printf("Target mode disabled\n"); 10072 xpt_free_path(lstate->path); 10073 free(lstate, M_DEVBUF); 10074 10075 ahd_pause(ahd); 10076 /* Can we clean up the target too? */ 10077 if (target != CAM_TARGET_WILDCARD) { 10078 tstate->enabled_luns[lun] = NULL; 10079 ahd->enabled_luns--; 10080 for (empty = 1, i = 0; i < 8; i++) 10081 if (tstate->enabled_luns[i] != NULL) { 10082 empty = 0; 10083 break; 10084 } 10085 10086 if (empty) { 10087 ahd_free_tstate(ahd, target, channel, 10088 /*force*/FALSE); 10089 if (ahd->features & AHD_MULTI_TID) { 10090 u_int targid_mask; 10091 10092 targid_mask = ahd_inw(ahd, TARGID); 10093 targid_mask &= ~target_mask; 10094 ahd_outw(ahd, TARGID, targid_mask); 10095 ahd_update_scsiid(ahd, targid_mask); 10096 } 10097 } 10098 } else { 10099 ahd->black_hole = NULL; 10100 10101 /* 10102 * We can't allow selections without 10103 * our black hole device. 10104 */ 10105 empty = TRUE; 10106 } 10107 if (ahd->enabled_luns == 0) { 10108 /* Disallow select-in */ 10109 u_int scsiseq1; 10110 10111 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 10112 scsiseq1 &= ~ENSELI; 10113 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 10114 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 10115 scsiseq1 &= ~ENSELI; 10116 ahd_outb(ahd, SCSISEQ1, scsiseq1); 10117 10118 if ((ahd->features & AHD_MULTIROLE) == 0) { 10119 printf("Configuring Initiator Mode\n"); 10120 ahd->flags &= ~AHD_TARGETROLE; 10121 ahd->flags |= AHD_INITIATORROLE; 10122 ahd_pause(ahd); 10123 ahd_loadseq(ahd); 10124 ahd_restart(ahd); 10125 /* 10126 * Unpaused. The extra unpause 10127 * that follows is harmless. 10128 */ 10129 } 10130 } 10131 ahd_unpause(ahd); 10132 } 10133 #endif 10134 } 10135 10136 static void 10137 ahd_update_scsiid(struct ahd_softc *ahd, u_int targid_mask) 10138 { 10139 #if NOT_YET 10140 u_int scsiid_mask; 10141 u_int scsiid; 10142 10143 if ((ahd->features & AHD_MULTI_TID) == 0) 10144 panic("ahd_update_scsiid called on non-multitid unit\n"); 10145 10146 /* 10147 * Since we will rely on the TARGID mask 10148 * for selection enables, ensure that OID 10149 * in SCSIID is not set to some other ID 10150 * that we don't want to allow selections on. 10151 */ 10152 if ((ahd->features & AHD_ULTRA2) != 0) 10153 scsiid = ahd_inb(ahd, SCSIID_ULTRA2); 10154 else 10155 scsiid = ahd_inb(ahd, SCSIID); 10156 scsiid_mask = 0x1 << (scsiid & OID); 10157 if ((targid_mask & scsiid_mask) == 0) { 10158 u_int our_id; 10159 10160 /* ffs counts from 1 */ 10161 our_id = ffs(targid_mask); 10162 if (our_id == 0) 10163 our_id = ahd->our_id; 10164 else 10165 our_id--; 10166 scsiid &= TID; 10167 scsiid |= our_id; 10168 } 10169 if ((ahd->features & AHD_ULTRA2) != 0) 10170 ahd_outb(ahd, SCSIID_ULTRA2, scsiid); 10171 else 10172 ahd_outb(ahd, SCSIID, scsiid); 10173 #endif 10174 } 10175 10176 void 10177 ahd_run_tqinfifo(struct ahd_softc *ahd, int paused) 10178 { 10179 struct target_cmd *cmd; 10180 10181 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_POSTREAD); 10182 while ((cmd = &ahd->targetcmds[ahd->tqinfifonext])->cmd_valid != 0) { 10183 /* 10184 * Only advance through the queue if we 10185 * have the resources to process the command. 10186 */ 10187 if (ahd_handle_target_cmd(ahd, cmd) != 0) 10188 break; 10189 10190 cmd->cmd_valid = 0; 10191 ahd_dmamap_sync(ahd, ahd->shared_data_dmat, 10192 ahd->shared_data_dmamap, 10193 ahd_targetcmd_offset(ahd, ahd->tqinfifonext), 10194 sizeof(struct target_cmd), 10195 BUS_DMASYNC_PREREAD); 10196 ahd->tqinfifonext++; 10197 10198 /* 10199 * Lazily update our position in the target mode incoming 10200 * command queue as seen by the sequencer. 10201 */ 10202 if ((ahd->tqinfifonext & (HOST_TQINPOS - 1)) == 1) { 10203 u_int hs_mailbox; 10204 10205 hs_mailbox = ahd_inb(ahd, HS_MAILBOX); 10206 hs_mailbox &= ~HOST_TQINPOS; 10207 hs_mailbox |= ahd->tqinfifonext & HOST_TQINPOS; 10208 ahd_outb(ahd, HS_MAILBOX, hs_mailbox); 10209 } 10210 } 10211 } 10212 10213 static int 10214 ahd_handle_target_cmd(struct ahd_softc *ahd, struct target_cmd *cmd) 10215 { 10216 struct ahd_tmode_tstate *tstate; 10217 struct ahd_tmode_lstate *lstate; 10218 struct ccb_accept_tio *atio; 10219 uint8_t *byte; 10220 int initiator; 10221 int target; 10222 int lun; 10223 10224 initiator = SCSIID_TARGET(ahd, cmd->scsiid); 10225 target = SCSIID_OUR_ID(cmd->scsiid); 10226 lun = (cmd->identify & MSG_IDENTIFY_LUNMASK); 10227 10228 byte = cmd->bytes; 10229 tstate = ahd->enabled_targets[target]; 10230 lstate = NULL; 10231 if (tstate != NULL) 10232 lstate = tstate->enabled_luns[lun]; 10233 10234 /* 10235 * Commands for disabled luns go to the black hole driver. 10236 */ 10237 if (lstate == NULL) 10238 lstate = ahd->black_hole; 10239 10240 atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios); 10241 if (atio == NULL) { 10242 ahd->flags |= AHD_TQINFIFO_BLOCKED; 10243 /* 10244 * Wait for more ATIOs from the peripheral driver for this lun. 10245 */ 10246 return (1); 10247 } else 10248 ahd->flags &= ~AHD_TQINFIFO_BLOCKED; 10249 #ifdef AHD_DEBUG 10250 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 10251 printf("Incoming command from %d for %d:%d%s\n", 10252 initiator, target, lun, 10253 lstate == ahd->black_hole ? "(Black Holed)" : ""); 10254 #endif 10255 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle); 10256 10257 if (lstate == ahd->black_hole) { 10258 /* Fill in the wildcards */ 10259 atio->ccb_h.target_id = target; 10260 atio->ccb_h.target_lun = lun; 10261 } 10262 10263 /* 10264 * Package it up and send it off to 10265 * whomever has this lun enabled. 10266 */ 10267 atio->sense_len = 0; 10268 atio->init_id = initiator; 10269 if (byte[0] != 0xFF) { 10270 /* Tag was included */ 10271 atio->tag_action = *byte++; 10272 atio->tag_id = *byte++; 10273 atio->ccb_h.flags |= CAM_TAG_ACTION_VALID; 10274 } else { 10275 atio->ccb_h.flags &= ~CAM_TAG_ACTION_VALID; 10276 } 10277 byte++; 10278 10279 /* Okay. Now determine the cdb size based on the command code */ 10280 switch (*byte >> CMD_GROUP_CODE_SHIFT) { 10281 case 0: 10282 atio->cdb_len = 6; 10283 break; 10284 case 1: 10285 case 2: 10286 atio->cdb_len = 10; 10287 break; 10288 case 4: 10289 atio->cdb_len = 16; 10290 break; 10291 case 5: 10292 atio->cdb_len = 12; 10293 break; 10294 case 3: 10295 default: 10296 /* Only copy the opcode. */ 10297 atio->cdb_len = 1; 10298 printf("Reserved or VU command code type encountered\n"); 10299 break; 10300 } 10301 10302 memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len); 10303 10304 atio->ccb_h.status |= CAM_CDB_RECVD; 10305 10306 if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) { 10307 /* 10308 * We weren't allowed to disconnect. 10309 * We're hanging on the bus until a 10310 * continue target I/O comes in response 10311 * to this accept tio. 10312 */ 10313 #ifdef AHD_DEBUG 10314 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 10315 printf("Received Immediate Command %d:%d:%d - %p\n", 10316 initiator, target, lun, ahd->pending_device); 10317 #endif 10318 ahd->pending_device = lstate; 10319 ahd_freeze_ccb((union ccb *)atio); 10320 atio->ccb_h.flags |= CAM_DIS_DISCONNECT; 10321 } 10322 xpt_done((union ccb*)atio); 10323 return (0); 10324 } 10325 10326 #endif 10327