1 /*- 2 * Core routines and tables shareable across OS platforms. 3 * 4 * SPDX-License-Identifier: BSD-3-Clause 5 * 6 * Copyright (c) 1994-2002, 2004 Justin T. Gibbs. 7 * Copyright (c) 2000-2003 Adaptec Inc. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions, and the following disclaimer, 15 * without modification. 16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 17 * substantially similar to the "NO WARRANTY" disclaimer below 18 * ("Disclaimer") and any redistribution must be conditioned upon 19 * including a substantially similar Disclaimer requirement for further 20 * binary redistribution. 21 * 3. Neither the names of the above-listed copyright holders nor the names 22 * of any contributors may be used to endorse or promote products derived 23 * from this software without specific prior written permission. 24 * 25 * Alternatively, this software may be distributed under the terms of the 26 * GNU General Public License ("GPL") version 2 as published by the Free 27 * Software Foundation. 28 * 29 * NO WARRANTY 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 34 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 35 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 36 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 37 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 38 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 39 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 40 * POSSIBILITY OF SUCH DAMAGES. 41 * 42 * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#246 $ 43 */ 44 45 #include <dev/aic7xxx/aic79xx_osm.h> 46 #include <dev/aic7xxx/aic79xx_inline.h> 47 #include <dev/aic7xxx/aicasm/aicasm_insformat.h> 48 49 /******************************** Globals *************************************/ 50 struct ahd_softc_tailq ahd_tailq = TAILQ_HEAD_INITIALIZER(ahd_tailq); 51 uint32_t ahd_attach_to_HostRAID_controllers = 1; 52 53 /***************************** Lookup Tables **********************************/ 54 char *ahd_chip_names[] = 55 { 56 "NONE", 57 "aic7901", 58 "aic7902", 59 "aic7901A" 60 }; 61 62 /* 63 * Hardware error codes. 64 */ 65 struct ahd_hard_error_entry { 66 uint8_t errno; 67 char *errmesg; 68 }; 69 70 static struct ahd_hard_error_entry ahd_hard_errors[] = { 71 { DSCTMOUT, "Discard Timer has timed out" }, 72 { ILLOPCODE, "Illegal Opcode in sequencer program" }, 73 { SQPARERR, "Sequencer Parity Error" }, 74 { DPARERR, "Data-path Parity Error" }, 75 { MPARERR, "Scratch or SCB Memory Parity Error" }, 76 { CIOPARERR, "CIOBUS Parity Error" }, 77 }; 78 static const u_int num_errors = NUM_ELEMENTS(ahd_hard_errors); 79 80 static struct ahd_phase_table_entry ahd_phase_table[] = 81 { 82 { P_DATAOUT, MSG_NOOP, "in Data-out phase" }, 83 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" }, 84 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" }, 85 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" }, 86 { P_COMMAND, MSG_NOOP, "in Command phase" }, 87 { P_MESGOUT, MSG_NOOP, "in Message-out phase" }, 88 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" }, 89 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" }, 90 { P_BUSFREE, MSG_NOOP, "while idle" }, 91 { 0, MSG_NOOP, "in unknown phase" } 92 }; 93 94 /* 95 * In most cases we only wish to itterate over real phases, so 96 * exclude the last element from the count. 97 */ 98 static const u_int num_phases = NUM_ELEMENTS(ahd_phase_table) - 1; 99 100 /* Our Sequencer Program */ 101 #include "aic79xx_seq.h" 102 103 /**************************** Function Declarations ***************************/ 104 static void ahd_handle_transmission_error(struct ahd_softc *ahd); 105 static void ahd_handle_lqiphase_error(struct ahd_softc *ahd, 106 u_int lqistat1); 107 static int ahd_handle_pkt_busfree(struct ahd_softc *ahd, 108 u_int busfreetime); 109 static int ahd_handle_nonpkt_busfree(struct ahd_softc *ahd); 110 static void ahd_handle_proto_violation(struct ahd_softc *ahd); 111 static void ahd_force_renegotiation(struct ahd_softc *ahd, 112 struct ahd_devinfo *devinfo); 113 114 static struct ahd_tmode_tstate* 115 ahd_alloc_tstate(struct ahd_softc *ahd, 116 u_int scsi_id, char channel); 117 #ifdef AHD_TARGET_MODE 118 static void ahd_free_tstate(struct ahd_softc *ahd, 119 u_int scsi_id, char channel, int force); 120 #endif 121 static void ahd_devlimited_syncrate(struct ahd_softc *ahd, 122 struct ahd_initiator_tinfo *, 123 u_int *period, 124 u_int *ppr_options, 125 role_t role); 126 static void ahd_update_neg_table(struct ahd_softc *ahd, 127 struct ahd_devinfo *devinfo, 128 struct ahd_transinfo *tinfo); 129 static void ahd_update_pending_scbs(struct ahd_softc *ahd); 130 static void ahd_fetch_devinfo(struct ahd_softc *ahd, 131 struct ahd_devinfo *devinfo); 132 static void ahd_scb_devinfo(struct ahd_softc *ahd, 133 struct ahd_devinfo *devinfo, 134 struct scb *scb); 135 static void ahd_setup_initiator_msgout(struct ahd_softc *ahd, 136 struct ahd_devinfo *devinfo, 137 struct scb *scb); 138 static void ahd_build_transfer_msg(struct ahd_softc *ahd, 139 struct ahd_devinfo *devinfo); 140 static void ahd_construct_sdtr(struct ahd_softc *ahd, 141 struct ahd_devinfo *devinfo, 142 u_int period, u_int offset); 143 static void ahd_construct_wdtr(struct ahd_softc *ahd, 144 struct ahd_devinfo *devinfo, 145 u_int bus_width); 146 static void ahd_construct_ppr(struct ahd_softc *ahd, 147 struct ahd_devinfo *devinfo, 148 u_int period, u_int offset, 149 u_int bus_width, u_int ppr_options); 150 static void ahd_clear_msg_state(struct ahd_softc *ahd); 151 static void ahd_handle_message_phase(struct ahd_softc *ahd); 152 typedef enum { 153 AHDMSG_1B, 154 AHDMSG_2B, 155 AHDMSG_EXT 156 } ahd_msgtype; 157 static int ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, 158 u_int msgval, int full); 159 static int ahd_parse_msg(struct ahd_softc *ahd, 160 struct ahd_devinfo *devinfo); 161 static int ahd_handle_msg_reject(struct ahd_softc *ahd, 162 struct ahd_devinfo *devinfo); 163 static void ahd_handle_ign_wide_residue(struct ahd_softc *ahd, 164 struct ahd_devinfo *devinfo); 165 static void ahd_reinitialize_dataptrs(struct ahd_softc *ahd); 166 static void ahd_handle_devreset(struct ahd_softc *ahd, 167 struct ahd_devinfo *devinfo, 168 u_int lun, cam_status status, 169 char *message, int verbose_level); 170 #ifdef AHD_TARGET_MODE 171 static void ahd_setup_target_msgin(struct ahd_softc *ahd, 172 struct ahd_devinfo *devinfo, 173 struct scb *scb); 174 #endif 175 176 static u_int ahd_sglist_size(struct ahd_softc *ahd); 177 static u_int ahd_sglist_allocsize(struct ahd_softc *ahd); 178 static bus_dmamap_callback_t 179 ahd_dmamap_cb; 180 static void ahd_initialize_hscbs(struct ahd_softc *ahd); 181 static int ahd_init_scbdata(struct ahd_softc *ahd); 182 static void ahd_fini_scbdata(struct ahd_softc *ahd); 183 static void ahd_setup_iocell_workaround(struct ahd_softc *ahd); 184 static void ahd_iocell_first_selection(struct ahd_softc *ahd); 185 static void ahd_add_col_list(struct ahd_softc *ahd, 186 struct scb *scb, u_int col_idx); 187 static void ahd_rem_col_list(struct ahd_softc *ahd, 188 struct scb *scb); 189 static void ahd_chip_init(struct ahd_softc *ahd); 190 static void ahd_qinfifo_requeue(struct ahd_softc *ahd, 191 struct scb *prev_scb, 192 struct scb *scb); 193 static int ahd_qinfifo_count(struct ahd_softc *ahd); 194 static int ahd_search_scb_list(struct ahd_softc *ahd, int target, 195 char channel, int lun, u_int tag, 196 role_t role, uint32_t status, 197 ahd_search_action action, 198 u_int *list_head, u_int *list_tail, 199 u_int tid); 200 static void ahd_stitch_tid_list(struct ahd_softc *ahd, 201 u_int tid_prev, u_int tid_cur, 202 u_int tid_next); 203 static void ahd_add_scb_to_free_list(struct ahd_softc *ahd, 204 u_int scbid); 205 static u_int ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 206 u_int prev, u_int next, u_int tid); 207 static void ahd_reset_current_bus(struct ahd_softc *ahd); 208 static ahd_callback_t ahd_reset_poll; 209 static ahd_callback_t ahd_stat_timer; 210 #ifdef AHD_DUMP_SEQ 211 static void ahd_dumpseq(struct ahd_softc *ahd); 212 #endif 213 static void ahd_loadseq(struct ahd_softc *ahd); 214 static int ahd_check_patch(struct ahd_softc *ahd, 215 struct patch **start_patch, 216 u_int start_instr, u_int *skip_addr); 217 static u_int ahd_resolve_seqaddr(struct ahd_softc *ahd, 218 u_int address); 219 static void ahd_download_instr(struct ahd_softc *ahd, 220 u_int instrptr, uint8_t *dconsts); 221 static int ahd_probe_stack_size(struct ahd_softc *ahd); 222 static int ahd_other_scb_timeout(struct ahd_softc *ahd, 223 struct scb *scb, 224 struct scb *other_scb); 225 static int ahd_scb_active_in_fifo(struct ahd_softc *ahd, 226 struct scb *scb); 227 static void ahd_run_data_fifo(struct ahd_softc *ahd, 228 struct scb *scb); 229 230 #ifdef AHD_TARGET_MODE 231 static void ahd_queue_lstate_event(struct ahd_softc *ahd, 232 struct ahd_tmode_lstate *lstate, 233 u_int initiator_id, 234 u_int event_type, 235 u_int event_arg); 236 static void ahd_update_scsiid(struct ahd_softc *ahd, 237 u_int targid_mask); 238 static int ahd_handle_target_cmd(struct ahd_softc *ahd, 239 struct target_cmd *cmd); 240 #endif 241 242 /******************************** Private Inlines *****************************/ 243 static __inline void ahd_assert_atn(struct ahd_softc *ahd); 244 static __inline int ahd_currently_packetized(struct ahd_softc *ahd); 245 static __inline int ahd_set_active_fifo(struct ahd_softc *ahd); 246 247 static __inline void 248 ahd_assert_atn(struct ahd_softc *ahd) 249 { 250 ahd_outb(ahd, SCSISIGO, ATNO); 251 } 252 253 /* 254 * Determine if the current connection has a packetized 255 * agreement. This does not necessarily mean that we 256 * are currently in a packetized transfer. We could 257 * just as easily be sending or receiving a message. 258 */ 259 static __inline int 260 ahd_currently_packetized(struct ahd_softc *ahd) 261 { 262 ahd_mode_state saved_modes; 263 int packetized; 264 265 saved_modes = ahd_save_modes(ahd); 266 if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) { 267 /* 268 * The packetized bit refers to the last 269 * connection, not the current one. Check 270 * for non-zero LQISTATE instead. 271 */ 272 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 273 packetized = ahd_inb(ahd, LQISTATE) != 0; 274 } else { 275 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 276 packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED; 277 } 278 ahd_restore_modes(ahd, saved_modes); 279 return (packetized); 280 } 281 282 static __inline int 283 ahd_set_active_fifo(struct ahd_softc *ahd) 284 { 285 u_int active_fifo; 286 287 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 288 active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 289 switch (active_fifo) { 290 case 0: 291 case 1: 292 ahd_set_modes(ahd, active_fifo, active_fifo); 293 return (1); 294 default: 295 return (0); 296 } 297 } 298 299 /************************* Sequencer Execution Control ************************/ 300 /* 301 * Restart the sequencer program from address zero 302 */ 303 void 304 ahd_restart(struct ahd_softc *ahd) 305 { 306 307 ahd_pause(ahd); 308 309 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 310 311 /* No more pending messages */ 312 ahd_clear_msg_state(ahd); 313 ahd_outb(ahd, SCSISIGO, 0); /* De-assert BSY */ 314 ahd_outb(ahd, MSG_OUT, MSG_NOOP); /* No message to send */ 315 ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET); 316 ahd_outb(ahd, SEQINTCTL, 0); 317 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 318 ahd_outb(ahd, SEQ_FLAGS, 0); 319 ahd_outb(ahd, SAVED_SCSIID, 0xFF); 320 ahd_outb(ahd, SAVED_LUN, 0xFF); 321 322 /* 323 * Ensure that the sequencer's idea of TQINPOS 324 * matches our own. The sequencer increments TQINPOS 325 * only after it sees a DMA complete and a reset could 326 * occur before the increment leaving the kernel to believe 327 * the command arrived but the sequencer to not. 328 */ 329 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 330 331 /* Always allow reselection */ 332 ahd_outb(ahd, SCSISEQ1, 333 ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP)); 334 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 335 336 /* 337 * Clear any pending sequencer interrupt. It is no 338 * longer relevant since we're resetting the Program 339 * Counter. 340 */ 341 ahd_outb(ahd, CLRINT, CLRSEQINT); 342 343 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 344 ahd_unpause(ahd); 345 } 346 347 void 348 ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo) 349 { 350 ahd_mode_state saved_modes; 351 352 #ifdef AHD_DEBUG 353 if ((ahd_debug & AHD_SHOW_FIFOS) != 0) 354 printf("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo); 355 #endif 356 saved_modes = ahd_save_modes(ahd); 357 ahd_set_modes(ahd, fifo, fifo); 358 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 359 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 360 ahd_outb(ahd, CCSGCTL, CCSGRESET); 361 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 362 ahd_outb(ahd, SG_STATE, 0); 363 ahd_restore_modes(ahd, saved_modes); 364 } 365 366 /************************* Input/Output Queues ********************************/ 367 /* 368 * Flush and completed commands that are sitting in the command 369 * complete queues down on the chip but have yet to be dma'ed back up. 370 */ 371 void 372 ahd_flush_qoutfifo(struct ahd_softc *ahd) 373 { 374 struct scb *scb; 375 ahd_mode_state saved_modes; 376 u_int saved_scbptr; 377 u_int ccscbctl; 378 u_int scbid; 379 u_int next_scbid; 380 381 saved_modes = ahd_save_modes(ahd); 382 383 /* 384 * Flush the good status FIFO for completed packetized commands. 385 */ 386 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 387 saved_scbptr = ahd_get_scbptr(ahd); 388 while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) { 389 u_int fifo_mode; 390 u_int i; 391 392 scbid = ahd_inw(ahd, GSFIFO); 393 scb = ahd_lookup_scb(ahd, scbid); 394 if (scb == NULL) { 395 printf("%s: Warning - GSFIFO SCB %d invalid\n", 396 ahd_name(ahd), scbid); 397 AHD_CORRECTABLE_ERROR(ahd); 398 continue; 399 } 400 /* 401 * Determine if this transaction is still active in 402 * any FIFO. If it is, we must flush that FIFO to 403 * the host before completing the command. 404 */ 405 fifo_mode = 0; 406 rescan_fifos: 407 for (i = 0; i < 2; i++) { 408 /* Toggle to the other mode. */ 409 fifo_mode ^= 1; 410 ahd_set_modes(ahd, fifo_mode, fifo_mode); 411 412 if (ahd_scb_active_in_fifo(ahd, scb) == 0) 413 continue; 414 415 ahd_run_data_fifo(ahd, scb); 416 417 /* 418 * Running this FIFO may cause a CFG4DATA for 419 * this same transaction to assert in the other 420 * FIFO or a new snapshot SAVEPTRS interrupt 421 * in this FIFO. Even running a FIFO may not 422 * clear the transaction if we are still waiting 423 * for data to drain to the host. We must loop 424 * until the transaction is not active in either 425 * FIFO just to be sure. Reset our loop counter 426 * so we will visit both FIFOs again before 427 * declaring this transaction finished. We 428 * also delay a bit so that status has a chance 429 * to change before we look at this FIFO again. 430 */ 431 aic_delay(200); 432 goto rescan_fifos; 433 } 434 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 435 ahd_set_scbptr(ahd, scbid); 436 if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0 437 && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0 438 || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR) 439 & SG_LIST_NULL) != 0)) { 440 u_int comp_head; 441 442 /* 443 * The transfer completed with a residual. 444 * Place this SCB on the complete DMA list 445 * so that we update our in-core copy of the 446 * SCB before completing the command. 447 */ 448 ahd_outb(ahd, SCB_SCSI_STATUS, 0); 449 ahd_outb(ahd, SCB_SGPTR, 450 ahd_inb_scbram(ahd, SCB_SGPTR) 451 | SG_STATUS_VALID); 452 ahd_outw(ahd, SCB_TAG, scbid); 453 ahd_outw(ahd, SCB_NEXT_COMPLETE, SCB_LIST_NULL); 454 comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 455 if (SCBID_IS_NULL(comp_head)) { 456 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, scbid); 457 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); 458 } else { 459 u_int tail; 460 461 tail = ahd_inw(ahd, COMPLETE_DMA_SCB_TAIL); 462 ahd_set_scbptr(ahd, tail); 463 ahd_outw(ahd, SCB_NEXT_COMPLETE, scbid); 464 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid); 465 ahd_set_scbptr(ahd, scbid); 466 } 467 } else 468 ahd_complete_scb(ahd, scb); 469 } 470 ahd_set_scbptr(ahd, saved_scbptr); 471 472 /* 473 * Setup for command channel portion of flush. 474 */ 475 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 476 477 /* 478 * Wait for any inprogress DMA to complete and clear DMA state 479 * if this if for an SCB in the qinfifo. 480 */ 481 while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) { 482 if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) { 483 if ((ccscbctl & ARRDONE) != 0) 484 break; 485 } else if ((ccscbctl & CCSCBDONE) != 0) 486 break; 487 aic_delay(200); 488 } 489 /* 490 * We leave the sequencer to cleanup in the case of DMA's to 491 * update the qoutfifo. In all other cases (DMA's to the 492 * chip or a push of an SCB from the COMPLETE_DMA_SCB list), 493 * we disable the DMA engine so that the sequencer will not 494 * attempt to handle the DMA completion. 495 */ 496 if ((ccscbctl & CCSCBDIR) != 0 || (ccscbctl & ARRDONE) != 0) 497 ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN)); 498 499 /* 500 * Complete any SCBs that just finished 501 * being DMA'ed into the qoutfifo. 502 */ 503 ahd_run_qoutfifo(ahd); 504 505 saved_scbptr = ahd_get_scbptr(ahd); 506 /* 507 * Manually update/complete any completed SCBs that are waiting to be 508 * DMA'ed back up to the host. 509 */ 510 scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 511 while (!SCBID_IS_NULL(scbid)) { 512 uint8_t *hscb_ptr; 513 u_int i; 514 515 ahd_set_scbptr(ahd, scbid); 516 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 517 scb = ahd_lookup_scb(ahd, scbid); 518 if (scb == NULL) { 519 printf("%s: Warning - DMA-up and complete " 520 "SCB %d invalid\n", ahd_name(ahd), scbid); 521 AHD_CORRECTABLE_ERROR(ahd); 522 continue; 523 } 524 hscb_ptr = (uint8_t *)scb->hscb; 525 for (i = 0; i < sizeof(struct hardware_scb); i++) 526 *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i); 527 528 ahd_complete_scb(ahd, scb); 529 scbid = next_scbid; 530 } 531 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 532 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); 533 534 scbid = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); 535 while (!SCBID_IS_NULL(scbid)) { 536 ahd_set_scbptr(ahd, scbid); 537 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 538 scb = ahd_lookup_scb(ahd, scbid); 539 if (scb == NULL) { 540 printf("%s: Warning - Complete Qfrz SCB %d invalid\n", 541 ahd_name(ahd), scbid); 542 AHD_CORRECTABLE_ERROR(ahd); 543 continue; 544 } 545 546 ahd_complete_scb(ahd, scb); 547 scbid = next_scbid; 548 } 549 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); 550 551 scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD); 552 while (!SCBID_IS_NULL(scbid)) { 553 ahd_set_scbptr(ahd, scbid); 554 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 555 scb = ahd_lookup_scb(ahd, scbid); 556 if (scb == NULL) { 557 printf("%s: Warning - Complete SCB %d invalid\n", 558 ahd_name(ahd), scbid); 559 AHD_CORRECTABLE_ERROR(ahd); 560 continue; 561 } 562 563 ahd_complete_scb(ahd, scb); 564 scbid = next_scbid; 565 } 566 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 567 568 /* 569 * Restore state. 570 */ 571 ahd_set_scbptr(ahd, saved_scbptr); 572 ahd_restore_modes(ahd, saved_modes); 573 ahd->flags |= AHD_UPDATE_PEND_CMDS; 574 } 575 576 /* 577 * Determine if an SCB for a packetized transaction 578 * is active in a FIFO. 579 */ 580 static int 581 ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb) 582 { 583 584 /* 585 * The FIFO is only active for our transaction if 586 * the SCBPTR matches the SCB's ID and the firmware 587 * has installed a handler for the FIFO or we have 588 * a pending SAVEPTRS or CFG4DATA interrupt. 589 */ 590 if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb) 591 || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0 592 && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0)) 593 return (0); 594 595 return (1); 596 } 597 598 /* 599 * Run a data fifo to completion for a transaction we know 600 * has completed across the SCSI bus (good status has been 601 * received). We are already set to the correct FIFO mode 602 * on entry to this routine. 603 * 604 * This function attempts to operate exactly as the firmware 605 * would when running this FIFO. Care must be taken to update 606 * this routine any time the firmware's FIFO algorithm is 607 * changed. 608 */ 609 static void 610 ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb) 611 { 612 u_int seqintsrc; 613 614 seqintsrc = ahd_inb(ahd, SEQINTSRC); 615 if ((seqintsrc & CFG4DATA) != 0) { 616 uint32_t datacnt; 617 uint32_t sgptr; 618 619 /* 620 * Clear full residual flag. 621 */ 622 sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID; 623 ahd_outb(ahd, SCB_SGPTR, sgptr); 624 625 /* 626 * Load datacnt and address. 627 */ 628 datacnt = ahd_inl_scbram(ahd, SCB_DATACNT); 629 if ((datacnt & AHD_DMA_LAST_SEG) != 0) { 630 sgptr |= LAST_SEG; 631 ahd_outb(ahd, SG_STATE, 0); 632 } else 633 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 634 ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR)); 635 ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK); 636 ahd_outb(ahd, SG_CACHE_PRE, sgptr); 637 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 638 639 /* 640 * Initialize Residual Fields. 641 */ 642 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24); 643 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK); 644 645 /* 646 * Mark the SCB as having a FIFO in use. 647 */ 648 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 649 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1); 650 651 /* 652 * Install a "fake" handler for this FIFO. 653 */ 654 ahd_outw(ahd, LONGJMP_ADDR, 0); 655 656 /* 657 * Notify the hardware that we have satisfied 658 * this sequencer interrupt. 659 */ 660 ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA); 661 } else if ((seqintsrc & SAVEPTRS) != 0) { 662 uint32_t sgptr; 663 uint32_t resid; 664 665 if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) { 666 /* 667 * Snapshot Save Pointers. All that 668 * is necessary to clear the snapshot 669 * is a CLRCHN. 670 */ 671 goto clrchn; 672 } 673 674 /* 675 * Disable S/G fetch so the DMA engine 676 * is available to future users. 677 */ 678 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) 679 ahd_outb(ahd, CCSGCTL, 0); 680 ahd_outb(ahd, SG_STATE, 0); 681 682 /* 683 * Flush the data FIFO. Strickly only 684 * necessary for Rev A parts. 685 */ 686 ahd_outb(ahd, DFCNTRL, ahd_inb(ahd, DFCNTRL) | FIFOFLUSH); 687 688 /* 689 * Calculate residual. 690 */ 691 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 692 resid = ahd_inl(ahd, SHCNT); 693 resid |= ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24; 694 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid); 695 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) { 696 /* 697 * Must back up to the correct S/G element. 698 * Typically this just means resetting our 699 * low byte to the offset in the SG_CACHE, 700 * but if we wrapped, we have to correct 701 * the other bytes of the sgptr too. 702 */ 703 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0 704 && (sgptr & 0x80) == 0) 705 sgptr -= 0x100; 706 sgptr &= ~0xFF; 707 sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW) 708 & SG_ADDR_MASK; 709 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 710 ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0); 711 } else if ((resid & AHD_SG_LEN_MASK) == 0) { 712 ahd_outb(ahd, SCB_RESIDUAL_SGPTR, 713 sgptr | SG_LIST_NULL); 714 } 715 /* 716 * Save Pointers. 717 */ 718 ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR)); 719 ahd_outl(ahd, SCB_DATACNT, resid); 720 ahd_outl(ahd, SCB_SGPTR, sgptr); 721 ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS); 722 ahd_outb(ahd, SEQIMODE, 723 ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS); 724 /* 725 * If the data is to the SCSI bus, we are 726 * done, otherwise wait for FIFOEMP. 727 */ 728 if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0) 729 goto clrchn; 730 } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) { 731 uint32_t sgptr; 732 uint64_t data_addr; 733 uint32_t data_len; 734 u_int dfcntrl; 735 736 /* 737 * Disable S/G fetch so the DMA engine 738 * is available to future users. We won't 739 * be using the DMA engine to load segments. 740 */ 741 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) { 742 ahd_outb(ahd, CCSGCTL, 0); 743 ahd_outb(ahd, SG_STATE, LOADING_NEEDED); 744 } 745 746 /* 747 * Wait for the DMA engine to notice that the 748 * host transfer is enabled and that there is 749 * space in the S/G FIFO for new segments before 750 * loading more segments. 751 */ 752 if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) != 0 753 && (ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) { 754 /* 755 * Determine the offset of the next S/G 756 * element to load. 757 */ 758 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 759 sgptr &= SG_PTR_MASK; 760 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 761 struct ahd_dma64_seg *sg; 762 763 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 764 data_addr = sg->addr; 765 data_len = sg->len; 766 sgptr += sizeof(*sg); 767 } else { 768 struct ahd_dma_seg *sg; 769 770 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 771 data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK; 772 data_addr <<= 8; 773 data_addr |= sg->addr; 774 data_len = sg->len; 775 sgptr += sizeof(*sg); 776 } 777 778 /* 779 * Update residual information. 780 */ 781 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24); 782 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 783 784 /* 785 * Load the S/G. 786 */ 787 if (data_len & AHD_DMA_LAST_SEG) { 788 sgptr |= LAST_SEG; 789 ahd_outb(ahd, SG_STATE, 0); 790 } 791 ahd_outq(ahd, HADDR, data_addr); 792 ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK); 793 ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF); 794 795 /* 796 * Advertise the segment to the hardware. 797 */ 798 dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN; 799 if ((ahd->features & AHD_NEW_DFCNTRL_OPTS) != 0) { 800 /* 801 * Use SCSIENWRDIS so that SCSIEN 802 * is never modified by this 803 * operation. 804 */ 805 dfcntrl |= SCSIENWRDIS; 806 } 807 ahd_outb(ahd, DFCNTRL, dfcntrl); 808 } 809 } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG_DONE) != 0) { 810 /* 811 * Transfer completed to the end of SG list 812 * and has flushed to the host. 813 */ 814 ahd_outb(ahd, SCB_SGPTR, 815 ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL); 816 goto clrchn; 817 } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) { 818 clrchn: 819 /* 820 * Clear any handler for this FIFO, decrement 821 * the FIFO use count for the SCB, and release 822 * the FIFO. 823 */ 824 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 825 ahd_outb(ahd, SCB_FIFO_USE_COUNT, 826 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1); 827 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 828 } 829 } 830 831 /* 832 * Look for entries in the QoutFIFO that have completed. 833 * The valid_tag completion field indicates the validity 834 * of the entry - the valid value toggles each time through 835 * the queue. We use the sg_status field in the completion 836 * entry to avoid referencing the hscb if the completion 837 * occurred with no errors and no residual. sg_status is 838 * a copy of the first byte (little endian) of the sgptr 839 * hscb field. 840 */ 841 void 842 ahd_run_qoutfifo(struct ahd_softc *ahd) 843 { 844 struct ahd_completion *completion; 845 struct scb *scb; 846 u_int scb_index; 847 848 if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0) 849 panic("ahd_run_qoutfifo recursion"); 850 ahd->flags |= AHD_RUNNING_QOUTFIFO; 851 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD); 852 for (;;) { 853 completion = &ahd->qoutfifo[ahd->qoutfifonext]; 854 855 if (completion->valid_tag != ahd->qoutfifonext_valid_tag) 856 break; 857 858 scb_index = aic_le16toh(completion->tag); 859 scb = ahd_lookup_scb(ahd, scb_index); 860 if (scb == NULL) { 861 printf("%s: WARNING no command for scb %d " 862 "(cmdcmplt)\nQOUTPOS = %d\n", 863 ahd_name(ahd), scb_index, 864 ahd->qoutfifonext); 865 AHD_CORRECTABLE_ERROR(ahd); 866 ahd_dump_card_state(ahd); 867 } else if ((completion->sg_status & SG_STATUS_VALID) != 0) { 868 ahd_handle_scb_status(ahd, scb); 869 } else { 870 ahd_done(ahd, scb); 871 } 872 873 ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1); 874 if (ahd->qoutfifonext == 0) 875 ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID; 876 } 877 ahd->flags &= ~AHD_RUNNING_QOUTFIFO; 878 } 879 880 /************************* Interrupt Handling *********************************/ 881 void 882 ahd_handle_hwerrint(struct ahd_softc *ahd) 883 { 884 /* 885 * Some catastrophic hardware error has occurred. 886 * Print it for the user and disable the controller. 887 */ 888 int i; 889 int error; 890 891 error = ahd_inb(ahd, ERROR); 892 for (i = 0; i < num_errors; i++) { 893 if ((error & ahd_hard_errors[i].errno) != 0) { 894 printf("%s: hwerrint, %s\n", 895 ahd_name(ahd), ahd_hard_errors[i].errmesg); 896 AHD_UNCORRECTABLE_ERROR(ahd); 897 } 898 } 899 900 ahd_dump_card_state(ahd); 901 panic("BRKADRINT"); 902 903 /* Tell everyone that this HBA is no longer available */ 904 ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 905 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN, 906 CAM_NO_HBA); 907 908 /* Tell the system that this controller has gone away. */ 909 ahd_free(ahd); 910 } 911 912 void 913 ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat) 914 { 915 u_int seqintcode; 916 917 /* 918 * Save the sequencer interrupt code and clear the SEQINT 919 * bit. We will unpause the sequencer, if appropriate, 920 * after servicing the request. 921 */ 922 seqintcode = ahd_inb(ahd, SEQINTCODE); 923 ahd_outb(ahd, CLRINT, CLRSEQINT); 924 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) { 925 /* 926 * Unpause the sequencer and let it clear 927 * SEQINT by writing NO_SEQINT to it. This 928 * will cause the sequencer to be paused again, 929 * which is the expected state of this routine. 930 */ 931 ahd_unpause(ahd); 932 while (!ahd_is_paused(ahd)) 933 ; 934 ahd_outb(ahd, CLRINT, CLRSEQINT); 935 } 936 ahd_update_modes(ahd); 937 #ifdef AHD_DEBUG 938 if ((ahd_debug & AHD_SHOW_MISC) != 0) 939 printf("%s: Handle Seqint Called for code %d\n", 940 ahd_name(ahd), seqintcode); 941 #endif 942 switch (seqintcode) { 943 case ENTERING_NONPACK: 944 { 945 struct scb *scb; 946 u_int scbid; 947 948 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 949 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 950 scbid = ahd_get_scbptr(ahd); 951 scb = ahd_lookup_scb(ahd, scbid); 952 if (scb == NULL) { 953 /* 954 * Somehow need to know if this 955 * is from a selection or reselection. 956 * From that, we can determine target 957 * ID so we at least have an I_T nexus. 958 */ 959 } else { 960 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 961 ahd_outb(ahd, SAVED_LUN, scb->hscb->lun); 962 ahd_outb(ahd, SEQ_FLAGS, 0x0); 963 } 964 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0 965 && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 966 /* 967 * Phase change after read stream with 968 * CRC error with P0 asserted on last 969 * packet. 970 */ 971 #ifdef AHD_DEBUG 972 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 973 printf("%s: Assuming LQIPHASE_NLQ with " 974 "P0 assertion\n", ahd_name(ahd)); 975 #endif 976 } 977 #ifdef AHD_DEBUG 978 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) 979 printf("%s: Entering NONPACK\n", ahd_name(ahd)); 980 #endif 981 break; 982 } 983 case INVALID_SEQINT: 984 printf("%s: Invalid Sequencer interrupt occurred.\n", 985 ahd_name(ahd)); 986 ahd_dump_card_state(ahd); 987 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 988 AHD_UNCORRECTABLE_ERROR(ahd); 989 break; 990 case STATUS_OVERRUN: 991 { 992 struct scb *scb; 993 u_int scbid; 994 995 scbid = ahd_get_scbptr(ahd); 996 scb = ahd_lookup_scb(ahd, scbid); 997 if (scb != NULL) 998 ahd_print_path(ahd, scb); 999 else 1000 printf("%s: ", ahd_name(ahd)); 1001 printf("SCB %d Packetized Status Overrun", scbid); 1002 ahd_dump_card_state(ahd); 1003 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1004 AHD_UNCORRECTABLE_ERROR(ahd); 1005 break; 1006 } 1007 case CFG4ISTAT_INTR: 1008 { 1009 struct scb *scb; 1010 u_int scbid; 1011 1012 scbid = ahd_get_scbptr(ahd); 1013 scb = ahd_lookup_scb(ahd, scbid); 1014 if (scb == NULL) { 1015 ahd_dump_card_state(ahd); 1016 printf("CFG4ISTAT: Free SCB %d referenced", scbid); 1017 AHD_FATAL_ERROR(ahd); 1018 panic("For safety"); 1019 } 1020 ahd_outq(ahd, HADDR, scb->sense_busaddr); 1021 ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE); 1022 ahd_outb(ahd, HCNT + 2, 0); 1023 ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG); 1024 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN); 1025 break; 1026 } 1027 case ILLEGAL_PHASE: 1028 { 1029 u_int bus_phase; 1030 1031 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1032 printf("%s: ILLEGAL_PHASE 0x%x\n", 1033 ahd_name(ahd), bus_phase); 1034 1035 switch (bus_phase) { 1036 case P_DATAOUT: 1037 case P_DATAIN: 1038 case P_DATAOUT_DT: 1039 case P_DATAIN_DT: 1040 case P_MESGOUT: 1041 case P_STATUS: 1042 case P_MESGIN: 1043 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1044 printf("%s: Issued Bus Reset.\n", ahd_name(ahd)); 1045 AHD_UNCORRECTABLE_ERROR(ahd); 1046 break; 1047 case P_COMMAND: 1048 { 1049 struct ahd_devinfo devinfo; 1050 struct scb *scb; 1051 struct ahd_tmode_tstate *tstate; 1052 u_int scbid; 1053 1054 /* 1055 * If a target takes us into the command phase 1056 * assume that it has been externally reset and 1057 * has thus lost our previous packetized negotiation 1058 * agreement. Since we have not sent an identify 1059 * message and may not have fully qualified the 1060 * connection, we change our command to TUR, assert 1061 * ATN and ABORT the task when we go to message in 1062 * phase. The OSM will see the REQUEUE_REQUEST 1063 * status and retry the command. 1064 */ 1065 scbid = ahd_get_scbptr(ahd); 1066 scb = ahd_lookup_scb(ahd, scbid); 1067 if (scb == NULL) { 1068 AHD_CORRECTABLE_ERROR(ahd); 1069 printf("Invalid phase with no valid SCB. " 1070 "Resetting bus.\n"); 1071 ahd_reset_channel(ahd, 'A', 1072 /*Initiate Reset*/TRUE); 1073 break; 1074 } 1075 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 1076 SCB_GET_TARGET(ahd, scb), 1077 SCB_GET_LUN(scb), 1078 SCB_GET_CHANNEL(ahd, scb), 1079 ROLE_INITIATOR); 1080 ahd_fetch_transinfo(ahd, 1081 devinfo.channel, 1082 devinfo.our_scsiid, 1083 devinfo.target, 1084 &tstate); 1085 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 1086 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1087 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 1088 /*offset*/0, /*ppr_options*/0, 1089 AHD_TRANS_ACTIVE, /*paused*/TRUE); 1090 ahd_outb(ahd, SCB_CDB_STORE, 0); 1091 ahd_outb(ahd, SCB_CDB_STORE+1, 0); 1092 ahd_outb(ahd, SCB_CDB_STORE+2, 0); 1093 ahd_outb(ahd, SCB_CDB_STORE+3, 0); 1094 ahd_outb(ahd, SCB_CDB_STORE+4, 0); 1095 ahd_outb(ahd, SCB_CDB_STORE+5, 0); 1096 ahd_outb(ahd, SCB_CDB_LEN, 6); 1097 scb->hscb->control &= ~(TAG_ENB|SCB_TAG_TYPE); 1098 scb->hscb->control |= MK_MESSAGE; 1099 ahd_outb(ahd, SCB_CONTROL, scb->hscb->control); 1100 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1101 ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid); 1102 /* 1103 * The lun is 0, regardless of the SCB's lun 1104 * as we have not sent an identify message. 1105 */ 1106 ahd_outb(ahd, SAVED_LUN, 0); 1107 ahd_outb(ahd, SEQ_FLAGS, 0); 1108 ahd_assert_atn(ahd); 1109 scb->flags &= ~SCB_PACKETIZED; 1110 scb->flags |= SCB_ABORT|SCB_CMDPHASE_ABORT; 1111 ahd_freeze_devq(ahd, scb); 1112 aic_set_transaction_status(scb, CAM_REQUEUE_REQ); 1113 aic_freeze_scb(scb); 1114 1115 /* 1116 * Allow the sequencer to continue with 1117 * non-pack processing. 1118 */ 1119 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1120 ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT); 1121 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 1122 ahd_outb(ahd, CLRLQOINT1, 0); 1123 } 1124 #ifdef AHD_DEBUG 1125 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1126 ahd_print_path(ahd, scb); 1127 AHD_CORRECTABLE_ERROR(ahd); 1128 printf("Unexpected command phase from " 1129 "packetized target\n"); 1130 } 1131 #endif 1132 break; 1133 } 1134 } 1135 break; 1136 } 1137 case CFG4OVERRUN: 1138 { 1139 struct scb *scb; 1140 u_int scb_index; 1141 1142 #ifdef AHD_DEBUG 1143 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1144 printf("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd), 1145 ahd_inb(ahd, MODE_PTR)); 1146 } 1147 #endif 1148 scb_index = ahd_get_scbptr(ahd); 1149 scb = ahd_lookup_scb(ahd, scb_index); 1150 if (scb == NULL) { 1151 /* 1152 * Attempt to transfer to an SCB that is 1153 * not outstanding. 1154 */ 1155 ahd_assert_atn(ahd); 1156 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1157 ahd->msgout_buf[0] = MSG_ABORT_TASK; 1158 ahd->msgout_len = 1; 1159 ahd->msgout_index = 0; 1160 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1161 /* 1162 * Clear status received flag to prevent any 1163 * attempt to complete this bogus SCB. 1164 */ 1165 ahd_outb(ahd, SCB_CONTROL, 1166 ahd_inb_scbram(ahd, SCB_CONTROL) 1167 & ~STATUS_RCVD); 1168 } 1169 break; 1170 } 1171 case DUMP_CARD_STATE: 1172 { 1173 ahd_dump_card_state(ahd); 1174 break; 1175 } 1176 case PDATA_REINIT: 1177 { 1178 #ifdef AHD_DEBUG 1179 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1180 printf("%s: PDATA_REINIT - DFCNTRL = 0x%x " 1181 "SG_CACHE_SHADOW = 0x%x\n", 1182 ahd_name(ahd), ahd_inb(ahd, DFCNTRL), 1183 ahd_inb(ahd, SG_CACHE_SHADOW)); 1184 } 1185 #endif 1186 ahd_reinitialize_dataptrs(ahd); 1187 break; 1188 } 1189 case HOST_MSG_LOOP: 1190 { 1191 struct ahd_devinfo devinfo; 1192 1193 /* 1194 * The sequencer has encountered a message phase 1195 * that requires host assistance for completion. 1196 * While handling the message phase(s), we will be 1197 * notified by the sequencer after each byte is 1198 * transferred so we can track bus phase changes. 1199 * 1200 * If this is the first time we've seen a HOST_MSG_LOOP 1201 * interrupt, initialize the state of the host message 1202 * loop. 1203 */ 1204 ahd_fetch_devinfo(ahd, &devinfo); 1205 if (ahd->msg_type == MSG_TYPE_NONE) { 1206 struct scb *scb; 1207 u_int scb_index; 1208 u_int bus_phase; 1209 1210 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1211 if (bus_phase != P_MESGIN 1212 && bus_phase != P_MESGOUT) { 1213 printf("ahd_intr: HOST_MSG_LOOP bad " 1214 "phase 0x%x\n", bus_phase); 1215 AHD_CORRECTABLE_ERROR(ahd); 1216 /* 1217 * Probably transitioned to bus free before 1218 * we got here. Just punt the message. 1219 */ 1220 ahd_dump_card_state(ahd); 1221 ahd_clear_intstat(ahd); 1222 ahd_restart(ahd); 1223 return; 1224 } 1225 1226 scb_index = ahd_get_scbptr(ahd); 1227 scb = ahd_lookup_scb(ahd, scb_index); 1228 if (devinfo.role == ROLE_INITIATOR) { 1229 if (bus_phase == P_MESGOUT) 1230 ahd_setup_initiator_msgout(ahd, 1231 &devinfo, 1232 scb); 1233 else { 1234 ahd->msg_type = 1235 MSG_TYPE_INITIATOR_MSGIN; 1236 ahd->msgin_index = 0; 1237 } 1238 } 1239 #ifdef AHD_TARGET_MODE 1240 else { 1241 if (bus_phase == P_MESGOUT) { 1242 ahd->msg_type = 1243 MSG_TYPE_TARGET_MSGOUT; 1244 ahd->msgin_index = 0; 1245 } 1246 else 1247 ahd_setup_target_msgin(ahd, 1248 &devinfo, 1249 scb); 1250 } 1251 #endif 1252 } 1253 1254 ahd_handle_message_phase(ahd); 1255 break; 1256 } 1257 case NO_MATCH: 1258 { 1259 /* Ensure we don't leave the selection hardware on */ 1260 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 1261 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 1262 1263 printf("%s:%c:%d: no active SCB for reconnecting " 1264 "target - issuing BUS DEVICE RESET\n", 1265 ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4); 1266 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " 1267 "REG0 == 0x%x ACCUM = 0x%x\n", 1268 ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN), 1269 ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM)); 1270 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " 1271 "SINDEX == 0x%x\n", 1272 ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd), 1273 ahd_find_busy_tcl(ahd, 1274 BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID), 1275 ahd_inb(ahd, SAVED_LUN))), 1276 ahd_inw(ahd, SINDEX)); 1277 printf("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " 1278 "SCB_CONTROL == 0x%x\n", 1279 ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID), 1280 ahd_inb_scbram(ahd, SCB_LUN), 1281 ahd_inb_scbram(ahd, SCB_CONTROL)); 1282 printf("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n", 1283 ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI)); 1284 printf("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0)); 1285 printf("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0)); 1286 ahd_dump_card_state(ahd); 1287 ahd->msgout_buf[0] = MSG_BUS_DEV_RESET; 1288 ahd->msgout_len = 1; 1289 ahd->msgout_index = 0; 1290 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 1291 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1292 ahd_assert_atn(ahd); 1293 break; 1294 } 1295 case PROTO_VIOLATION: 1296 { 1297 ahd_handle_proto_violation(ahd); 1298 break; 1299 } 1300 case IGN_WIDE_RES: 1301 { 1302 struct ahd_devinfo devinfo; 1303 1304 ahd_fetch_devinfo(ahd, &devinfo); 1305 ahd_handle_ign_wide_residue(ahd, &devinfo); 1306 break; 1307 } 1308 case BAD_PHASE: 1309 { 1310 u_int lastphase; 1311 1312 lastphase = ahd_inb(ahd, LASTPHASE); 1313 printf("%s:%c:%d: unknown scsi bus phase %x, " 1314 "lastphase = 0x%x. Attempting to continue\n", 1315 ahd_name(ahd), 'A', 1316 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1317 lastphase, ahd_inb(ahd, SCSISIGI)); 1318 AHD_CORRECTABLE_ERROR(ahd); 1319 break; 1320 } 1321 case MISSED_BUSFREE: 1322 { 1323 u_int lastphase; 1324 1325 lastphase = ahd_inb(ahd, LASTPHASE); 1326 printf("%s:%c:%d: Missed busfree. " 1327 "Lastphase = 0x%x, Curphase = 0x%x\n", 1328 ahd_name(ahd), 'A', 1329 SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)), 1330 lastphase, ahd_inb(ahd, SCSISIGI)); 1331 AHD_CORRECTABLE_ERROR(ahd); 1332 ahd_restart(ahd); 1333 return; 1334 } 1335 case DATA_OVERRUN: 1336 { 1337 /* 1338 * When the sequencer detects an overrun, it 1339 * places the controller in "BITBUCKET" mode 1340 * and allows the target to complete its transfer. 1341 * Unfortunately, none of the counters get updated 1342 * when the controller is in this mode, so we have 1343 * no way of knowing how large the overrun was. 1344 */ 1345 struct scb *scb; 1346 u_int scbindex; 1347 #ifdef AHD_DEBUG 1348 u_int lastphase; 1349 #endif 1350 1351 scbindex = ahd_get_scbptr(ahd); 1352 scb = ahd_lookup_scb(ahd, scbindex); 1353 #ifdef AHD_DEBUG 1354 lastphase = ahd_inb(ahd, LASTPHASE); 1355 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1356 ahd_print_path(ahd, scb); 1357 printf("data overrun detected %s. Tag == 0x%x.\n", 1358 ahd_lookup_phase_entry(lastphase)->phasemsg, 1359 SCB_GET_TAG(scb)); 1360 ahd_print_path(ahd, scb); 1361 printf("%s seen Data Phase. Length = %ld. " 1362 "NumSGs = %d.\n", 1363 ahd_inb(ahd, SEQ_FLAGS) & DPHASE 1364 ? "Have" : "Haven't", 1365 aic_get_transfer_length(scb), scb->sg_count); 1366 ahd_dump_sglist(scb); 1367 } 1368 #endif 1369 1370 /* 1371 * Set this and it will take effect when the 1372 * target does a command complete. 1373 */ 1374 ahd_freeze_devq(ahd, scb); 1375 aic_set_transaction_status(scb, CAM_DATA_RUN_ERR); 1376 aic_freeze_scb(scb); 1377 break; 1378 } 1379 case MKMSG_FAILED: 1380 { 1381 struct ahd_devinfo devinfo; 1382 struct scb *scb; 1383 u_int scbid; 1384 1385 ahd_fetch_devinfo(ahd, &devinfo); 1386 printf("%s:%c:%d:%d: Attempt to issue message failed\n", 1387 ahd_name(ahd), devinfo.channel, devinfo.target, 1388 devinfo.lun); 1389 scbid = ahd_get_scbptr(ahd); 1390 scb = ahd_lookup_scb(ahd, scbid); 1391 AHD_CORRECTABLE_ERROR(ahd); 1392 if (scb != NULL 1393 && (scb->flags & SCB_RECOVERY_SCB) != 0) 1394 /* 1395 * Ensure that we didn't put a second instance of this 1396 * SCB into the QINFIFO. 1397 */ 1398 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1399 SCB_GET_CHANNEL(ahd, scb), 1400 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1401 ROLE_INITIATOR, /*status*/0, 1402 SEARCH_REMOVE); 1403 ahd_outb(ahd, SCB_CONTROL, 1404 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 1405 break; 1406 } 1407 case TASKMGMT_FUNC_COMPLETE: 1408 { 1409 u_int scbid; 1410 struct scb *scb; 1411 1412 scbid = ahd_get_scbptr(ahd); 1413 scb = ahd_lookup_scb(ahd, scbid); 1414 if (scb != NULL) { 1415 u_int lun; 1416 u_int tag; 1417 cam_status error; 1418 1419 ahd_print_path(ahd, scb); 1420 printf("Task Management Func 0x%x Complete\n", 1421 scb->hscb->task_management); 1422 lun = CAM_LUN_WILDCARD; 1423 tag = SCB_LIST_NULL; 1424 1425 switch (scb->hscb->task_management) { 1426 case SIU_TASKMGMT_ABORT_TASK: 1427 tag = SCB_GET_TAG(scb); 1428 case SIU_TASKMGMT_ABORT_TASK_SET: 1429 case SIU_TASKMGMT_CLEAR_TASK_SET: 1430 lun = scb->hscb->lun; 1431 error = CAM_REQ_ABORTED; 1432 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 1433 'A', lun, tag, ROLE_INITIATOR, 1434 error); 1435 break; 1436 case SIU_TASKMGMT_LUN_RESET: 1437 lun = scb->hscb->lun; 1438 case SIU_TASKMGMT_TARGET_RESET: 1439 { 1440 struct ahd_devinfo devinfo; 1441 1442 ahd_scb_devinfo(ahd, &devinfo, scb); 1443 error = CAM_BDR_SENT; 1444 ahd_handle_devreset(ahd, &devinfo, lun, 1445 CAM_BDR_SENT, 1446 lun != CAM_LUN_WILDCARD 1447 ? "Lun Reset" 1448 : "Target Reset", 1449 /*verbose_level*/0); 1450 break; 1451 } 1452 default: 1453 panic("Unexpected TaskMgmt Func\n"); 1454 break; 1455 } 1456 } 1457 break; 1458 } 1459 case TASKMGMT_CMD_CMPLT_OKAY: 1460 { 1461 u_int scbid; 1462 struct scb *scb; 1463 1464 /* 1465 * An ABORT TASK TMF failed to be delivered before 1466 * the targeted command completed normally. 1467 */ 1468 scbid = ahd_get_scbptr(ahd); 1469 scb = ahd_lookup_scb(ahd, scbid); 1470 if (scb != NULL) { 1471 /* 1472 * Remove the second instance of this SCB from 1473 * the QINFIFO if it is still there. 1474 */ 1475 ahd_print_path(ahd, scb); 1476 printf("SCB completes before TMF\n"); 1477 /* 1478 * Handle losing the race. Wait until any 1479 * current selection completes. We will then 1480 * set the TMF back to zero in this SCB so that 1481 * the sequencer doesn't bother to issue another 1482 * sequencer interrupt for its completion. 1483 */ 1484 while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 1485 && (ahd_inb(ahd, SSTAT0) & SELDO) == 0 1486 && (ahd_inb(ahd, SSTAT1) & SELTO) == 0) 1487 ; 1488 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0); 1489 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 1490 SCB_GET_CHANNEL(ahd, scb), 1491 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 1492 ROLE_INITIATOR, /*status*/0, 1493 SEARCH_REMOVE); 1494 } 1495 break; 1496 } 1497 case TRACEPOINT0: 1498 case TRACEPOINT1: 1499 case TRACEPOINT2: 1500 case TRACEPOINT3: 1501 printf("%s: Tracepoint %d\n", ahd_name(ahd), 1502 seqintcode - TRACEPOINT0); 1503 break; 1504 case NO_SEQINT: 1505 break; 1506 case SAW_HWERR: 1507 ahd_handle_hwerrint(ahd); 1508 break; 1509 default: 1510 printf("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd), 1511 seqintcode); 1512 break; 1513 } 1514 /* 1515 * The sequencer is paused immediately on 1516 * a SEQINT, so we should restart it when 1517 * we're done. 1518 */ 1519 ahd_unpause(ahd); 1520 } 1521 1522 void 1523 ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) 1524 { 1525 struct scb *scb; 1526 u_int status0; 1527 u_int status3; 1528 u_int status; 1529 u_int lqistat1; 1530 u_int lqostat0; 1531 u_int scbid; 1532 u_int busfreetime; 1533 1534 ahd_update_modes(ahd); 1535 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1536 1537 status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR); 1538 status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO); 1539 status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR); 1540 lqistat1 = ahd_inb(ahd, LQISTAT1); 1541 lqostat0 = ahd_inb(ahd, LQOSTAT0); 1542 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1543 if ((status0 & (SELDI|SELDO)) != 0) { 1544 u_int simode0; 1545 1546 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1547 simode0 = ahd_inb(ahd, SIMODE0); 1548 status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO); 1549 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1550 } 1551 scbid = ahd_get_scbptr(ahd); 1552 scb = ahd_lookup_scb(ahd, scbid); 1553 if (scb != NULL 1554 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 1555 scb = NULL; 1556 1557 if ((status0 & IOERR) != 0) { 1558 u_int now_lvd; 1559 1560 now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40; 1561 printf("%s: Transceiver State Has Changed to %s mode\n", 1562 ahd_name(ahd), now_lvd ? "LVD" : "SE"); 1563 ahd_outb(ahd, CLRSINT0, CLRIOERR); 1564 /* 1565 * A change in I/O mode is equivalent to a bus reset. 1566 */ 1567 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1568 ahd_pause(ahd); 1569 ahd_setup_iocell_workaround(ahd); 1570 ahd_unpause(ahd); 1571 } else if ((status0 & OVERRUN) != 0) { 1572 printf("%s: SCSI offset overrun detected. Resetting bus.\n", 1573 ahd_name(ahd)); 1574 AHD_CORRECTABLE_ERROR(ahd); 1575 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1576 } else if ((status & SCSIRSTI) != 0) { 1577 printf("%s: Someone reset channel A\n", ahd_name(ahd)); 1578 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE); 1579 AHD_UNCORRECTABLE_ERROR(ahd); 1580 } else if ((status & SCSIPERR) != 0) { 1581 /* Make sure the sequencer is in a safe location. */ 1582 ahd_clear_critical_section(ahd); 1583 1584 ahd_handle_transmission_error(ahd); 1585 } else if (lqostat0 != 0) { 1586 printf("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0); 1587 ahd_outb(ahd, CLRLQOINT0, lqostat0); 1588 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 1589 ahd_outb(ahd, CLRLQOINT1, 0); 1590 } else if ((status & SELTO) != 0) { 1591 u_int scbid; 1592 1593 /* Stop the selection */ 1594 ahd_outb(ahd, SCSISEQ0, 0); 1595 1596 /* Make sure the sequencer is in a safe location. */ 1597 ahd_clear_critical_section(ahd); 1598 1599 /* No more pending messages */ 1600 ahd_clear_msg_state(ahd); 1601 1602 /* Clear interrupt state */ 1603 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR); 1604 1605 /* 1606 * Although the driver does not care about the 1607 * 'Selection in Progress' status bit, the busy 1608 * LED does. SELINGO is only cleared by a successful 1609 * selection, so we must manually clear it to insure 1610 * the LED turns off just incase no future successful 1611 * selections occur (e.g. no devices on the bus). 1612 */ 1613 ahd_outb(ahd, CLRSINT0, CLRSELINGO); 1614 1615 scbid = ahd_inw(ahd, WAITING_TID_HEAD); 1616 scb = ahd_lookup_scb(ahd, scbid); 1617 if (scb == NULL) { 1618 printf("%s: ahd_intr - referenced scb not " 1619 "valid during SELTO scb(0x%x)\n", 1620 ahd_name(ahd), scbid); 1621 ahd_dump_card_state(ahd); 1622 AHD_UNCORRECTABLE_ERROR(ahd); 1623 } else { 1624 struct ahd_devinfo devinfo; 1625 #ifdef AHD_DEBUG 1626 if ((ahd_debug & AHD_SHOW_SELTO) != 0) { 1627 ahd_print_path(ahd, scb); 1628 printf("Saw Selection Timeout for SCB 0x%x\n", 1629 scbid); 1630 } 1631 #endif 1632 ahd_scb_devinfo(ahd, &devinfo, scb); 1633 aic_set_transaction_status(scb, CAM_SEL_TIMEOUT); 1634 ahd_freeze_devq(ahd, scb); 1635 1636 /* 1637 * Cancel any pending transactions on the device 1638 * now that it seems to be missing. This will 1639 * also revert us to async/narrow transfers until 1640 * we can renegotiate with the device. 1641 */ 1642 ahd_handle_devreset(ahd, &devinfo, 1643 CAM_LUN_WILDCARD, 1644 CAM_SEL_TIMEOUT, 1645 "Selection Timeout", 1646 /*verbose_level*/1); 1647 } 1648 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1649 ahd_iocell_first_selection(ahd); 1650 ahd_unpause(ahd); 1651 } else if ((status0 & (SELDI|SELDO)) != 0) { 1652 ahd_iocell_first_selection(ahd); 1653 ahd_unpause(ahd); 1654 } else if (status3 != 0) { 1655 printf("%s: SCSI Cell parity error SSTAT3 == 0x%x\n", 1656 ahd_name(ahd), status3); 1657 AHD_CORRECTABLE_ERROR(ahd); 1658 ahd_outb(ahd, CLRSINT3, status3); 1659 } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) { 1660 /* Make sure the sequencer is in a safe location. */ 1661 ahd_clear_critical_section(ahd); 1662 1663 ahd_handle_lqiphase_error(ahd, lqistat1); 1664 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1665 /* 1666 * This status can be delayed during some 1667 * streaming operations. The SCSIPHASE 1668 * handler has already dealt with this case 1669 * so just clear the error. 1670 */ 1671 ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ); 1672 } else if ((status & BUSFREE) != 0 1673 || (lqistat1 & LQOBUSFREE) != 0) { 1674 u_int lqostat1; 1675 int restart; 1676 int clear_fifo; 1677 int packetized; 1678 u_int mode; 1679 1680 /* 1681 * Clear our selection hardware as soon as possible. 1682 * We may have an entry in the waiting Q for this target, 1683 * that is affected by this busfree and we don't want to 1684 * go about selecting the target while we handle the event. 1685 */ 1686 ahd_outb(ahd, SCSISEQ0, 0); 1687 1688 /* Make sure the sequencer is in a safe location. */ 1689 ahd_clear_critical_section(ahd); 1690 1691 /* 1692 * Determine what we were up to at the time of 1693 * the busfree. 1694 */ 1695 mode = AHD_MODE_SCSI; 1696 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME; 1697 lqostat1 = ahd_inb(ahd, LQOSTAT1); 1698 switch (busfreetime) { 1699 case BUSFREE_DFF0: 1700 case BUSFREE_DFF1: 1701 { 1702 u_int scbid; 1703 struct scb *scb; 1704 1705 mode = busfreetime == BUSFREE_DFF0 1706 ? AHD_MODE_DFF0 : AHD_MODE_DFF1; 1707 ahd_set_modes(ahd, mode, mode); 1708 scbid = ahd_get_scbptr(ahd); 1709 scb = ahd_lookup_scb(ahd, scbid); 1710 if (scb == NULL) { 1711 printf("%s: Invalid SCB %d in DFF%d " 1712 "during unexpected busfree\n", 1713 ahd_name(ahd), scbid, mode); 1714 packetized = 0; 1715 AHD_CORRECTABLE_ERROR(ahd); 1716 } else 1717 packetized = (scb->flags & SCB_PACKETIZED) != 0; 1718 clear_fifo = 1; 1719 break; 1720 } 1721 case BUSFREE_LQO: 1722 clear_fifo = 0; 1723 packetized = 1; 1724 break; 1725 default: 1726 clear_fifo = 0; 1727 packetized = (lqostat1 & LQOBUSFREE) != 0; 1728 if (!packetized 1729 && ahd_inb(ahd, LASTPHASE) == P_BUSFREE 1730 && (ahd_inb(ahd, SSTAT0) & SELDI) == 0 1731 && ((ahd_inb(ahd, SSTAT0) & SELDO) == 0 1732 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) == 0)) 1733 /* 1734 * Assume packetized if we are not 1735 * on the bus in a non-packetized 1736 * capacity and any pending selection 1737 * was a packetized selection. 1738 */ 1739 packetized = 1; 1740 break; 1741 } 1742 1743 #ifdef AHD_DEBUG 1744 if ((ahd_debug & AHD_SHOW_MISC) != 0) 1745 printf("Saw Busfree. Busfreetime = 0x%x.\n", 1746 busfreetime); 1747 #endif 1748 /* 1749 * Busfrees that occur in non-packetized phases are 1750 * handled by the nonpkt_busfree handler. 1751 */ 1752 if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) { 1753 restart = ahd_handle_pkt_busfree(ahd, busfreetime); 1754 } else { 1755 packetized = 0; 1756 restart = ahd_handle_nonpkt_busfree(ahd); 1757 } 1758 /* 1759 * Clear the busfree interrupt status. The setting of 1760 * the interrupt is a pulse, so in a perfect world, we 1761 * would not need to muck with the ENBUSFREE logic. This 1762 * would ensure that if the bus moves on to another 1763 * connection, busfree protection is still in force. If 1764 * BUSFREEREV is broken, however, we must manually clear 1765 * the ENBUSFREE if the busfree occurred during a non-pack 1766 * connection so that we don't get false positives during 1767 * future, packetized, connections. 1768 */ 1769 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 1770 if (packetized == 0 1771 && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0) 1772 ahd_outb(ahd, SIMODE1, 1773 ahd_inb(ahd, SIMODE1) & ~ENBUSFREE); 1774 1775 if (clear_fifo) 1776 ahd_clear_fifo(ahd, mode); 1777 1778 ahd_clear_msg_state(ahd); 1779 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1780 if (restart) { 1781 ahd_restart(ahd); 1782 } else { 1783 ahd_unpause(ahd); 1784 } 1785 } else { 1786 printf("%s: Missing case in ahd_handle_scsiint. status = %x\n", 1787 ahd_name(ahd), status); 1788 ahd_dump_card_state(ahd); 1789 ahd_clear_intstat(ahd); 1790 ahd_unpause(ahd); 1791 } 1792 } 1793 1794 static void 1795 ahd_handle_transmission_error(struct ahd_softc *ahd) 1796 { 1797 struct scb *scb; 1798 u_int scbid; 1799 u_int lqistat1; 1800 u_int msg_out; 1801 u_int curphase; 1802 u_int lastphase; 1803 u_int perrdiag; 1804 u_int cur_col; 1805 int silent; 1806 1807 scb = NULL; 1808 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1809 lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ); 1810 ahd_inb(ahd, LQISTAT2); 1811 if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0 1812 && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) { 1813 u_int lqistate; 1814 1815 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 1816 lqistate = ahd_inb(ahd, LQISTATE); 1817 if ((lqistate >= 0x1E && lqistate <= 0x24) 1818 || (lqistate == 0x29)) { 1819 #ifdef AHD_DEBUG 1820 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) { 1821 printf("%s: NLQCRC found via LQISTATE\n", 1822 ahd_name(ahd)); 1823 } 1824 #endif 1825 lqistat1 |= LQICRCI_NLQ; 1826 } 1827 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1828 } 1829 1830 ahd_outb(ahd, CLRLQIINT1, lqistat1); 1831 lastphase = ahd_inb(ahd, LASTPHASE); 1832 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 1833 perrdiag = ahd_inb(ahd, PERRDIAG); 1834 msg_out = MSG_INITIATOR_DET_ERR; 1835 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR); 1836 1837 /* 1838 * Try to find the SCB associated with this error. 1839 */ 1840 silent = FALSE; 1841 if (lqistat1 == 0 1842 || (lqistat1 & LQICRCI_NLQ) != 0) { 1843 if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0) 1844 ahd_set_active_fifo(ahd); 1845 scbid = ahd_get_scbptr(ahd); 1846 scb = ahd_lookup_scb(ahd, scbid); 1847 if (scb != NULL && SCB_IS_SILENT(scb)) 1848 silent = TRUE; 1849 } 1850 1851 cur_col = 0; 1852 if (silent == FALSE) { 1853 printf("%s: Transmission error detected\n", ahd_name(ahd)); 1854 ahd_lqistat1_print(lqistat1, &cur_col, 50); 1855 ahd_lastphase_print(lastphase, &cur_col, 50); 1856 ahd_scsisigi_print(curphase, &cur_col, 50); 1857 ahd_perrdiag_print(perrdiag, &cur_col, 50); 1858 printf("\n"); 1859 AHD_CORRECTABLE_ERROR(ahd); 1860 ahd_dump_card_state(ahd); 1861 } 1862 1863 if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) { 1864 if (silent == FALSE) { 1865 printf("%s: Gross protocol error during incoming " 1866 "packet. lqistat1 == 0x%x. Resetting bus.\n", 1867 ahd_name(ahd), lqistat1); 1868 AHD_UNCORRECTABLE_ERROR(ahd); 1869 } 1870 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1871 return; 1872 } else if ((lqistat1 & LQICRCI_LQ) != 0) { 1873 /* 1874 * A CRC error has been detected on an incoming LQ. 1875 * The bus is currently hung on the last ACK. 1876 * Hit LQIRETRY to release the last ack, and 1877 * wait for the sequencer to determine that ATNO 1878 * is asserted while in message out to take us 1879 * to our host message loop. No NONPACKREQ or 1880 * LQIPHASE type errors will occur in this 1881 * scenario. After this first LQIRETRY, the LQI 1882 * manager will be in ISELO where it will 1883 * happily sit until another packet phase begins. 1884 * Unexpected bus free detection is enabled 1885 * through any phases that occur after we release 1886 * this last ack until the LQI manager sees a 1887 * packet phase. This implies we may have to 1888 * ignore a perfectly valid "unexected busfree" 1889 * after our "initiator detected error" message is 1890 * sent. A busfree is the expected response after 1891 * we tell the target that it's L_Q was corrupted. 1892 * (SPI4R09 10.7.3.3.3) 1893 */ 1894 ahd_outb(ahd, LQCTL2, LQIRETRY); 1895 printf("LQIRetry for LQICRCI_LQ to release ACK\n"); 1896 AHD_CORRECTABLE_ERROR(ahd); 1897 } else if ((lqistat1 & LQICRCI_NLQ) != 0) { 1898 /* 1899 * We detected a CRC error in a NON-LQ packet. 1900 * The hardware has varying behavior in this situation 1901 * depending on whether this packet was part of a 1902 * stream or not. 1903 * 1904 * PKT by PKT mode: 1905 * The hardware has already acked the complete packet. 1906 * If the target honors our outstanding ATN condition, 1907 * we should be (or soon will be) in MSGOUT phase. 1908 * This will trigger the LQIPHASE_LQ status bit as the 1909 * hardware was expecting another LQ. Unexpected 1910 * busfree detection is enabled. Once LQIPHASE_LQ is 1911 * true (first entry into host message loop is much 1912 * the same), we must clear LQIPHASE_LQ and hit 1913 * LQIRETRY so the hardware is ready to handle 1914 * a future LQ. NONPACKREQ will not be asserted again 1915 * once we hit LQIRETRY until another packet is 1916 * processed. The target may either go busfree 1917 * or start another packet in response to our message. 1918 * 1919 * Read Streaming P0 asserted: 1920 * If we raise ATN and the target completes the entire 1921 * stream (P0 asserted during the last packet), the 1922 * hardware will ack all data and return to the ISTART 1923 * state. When the target reponds to our ATN condition, 1924 * LQIPHASE_LQ will be asserted. We should respond to 1925 * this with an LQIRETRY to prepare for any future 1926 * packets. NONPACKREQ will not be asserted again 1927 * once we hit LQIRETRY until another packet is 1928 * processed. The target may either go busfree or 1929 * start another packet in response to our message. 1930 * Busfree detection is enabled. 1931 * 1932 * Read Streaming P0 not asserted: 1933 * If we raise ATN and the target transitions to 1934 * MSGOUT in or after a packet where P0 is not 1935 * asserted, the hardware will assert LQIPHASE_NLQ. 1936 * We should respond to the LQIPHASE_NLQ with an 1937 * LQIRETRY. Should the target stay in a non-pkt 1938 * phase after we send our message, the hardware 1939 * will assert LQIPHASE_LQ. Recovery is then just as 1940 * listed above for the read streaming with P0 asserted. 1941 * Busfree detection is enabled. 1942 */ 1943 if (silent == FALSE) 1944 printf("LQICRC_NLQ\n"); 1945 if (scb == NULL) { 1946 printf("%s: No SCB valid for LQICRC_NLQ. " 1947 "Resetting bus\n", ahd_name(ahd)); 1948 AHD_UNCORRECTABLE_ERROR(ahd); 1949 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1950 return; 1951 } 1952 } else if ((lqistat1 & LQIBADLQI) != 0) { 1953 printf("Need to handle BADLQI!\n"); 1954 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 1955 return; 1956 } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) { 1957 if ((curphase & ~P_DATAIN_DT) != 0) { 1958 /* Ack the byte. So we can continue. */ 1959 if (silent == FALSE) 1960 printf("Acking %s to clear perror\n", 1961 ahd_lookup_phase_entry(curphase)->phasemsg); 1962 ahd_inb(ahd, SCSIDAT); 1963 } 1964 1965 if (curphase == P_MESGIN) 1966 msg_out = MSG_PARITY_ERROR; 1967 } 1968 1969 /* 1970 * We've set the hardware to assert ATN if we 1971 * get a parity error on "in" phases, so all we 1972 * need to do is stuff the message buffer with 1973 * the appropriate message. "In" phases have set 1974 * mesg_out to something other than MSG_NOP. 1975 */ 1976 ahd->send_msg_perror = msg_out; 1977 if (scb != NULL && msg_out == MSG_INITIATOR_DET_ERR) 1978 scb->flags |= SCB_TRANSMISSION_ERROR; 1979 ahd_outb(ahd, MSG_OUT, HOST_MSG); 1980 ahd_outb(ahd, CLRINT, CLRSCSIINT); 1981 ahd_unpause(ahd); 1982 } 1983 1984 static void 1985 ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1) 1986 { 1987 /* 1988 * Clear the sources of the interrupts. 1989 */ 1990 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 1991 ahd_outb(ahd, CLRLQIINT1, lqistat1); 1992 1993 /* 1994 * If the "illegal" phase changes were in response 1995 * to our ATN to flag a CRC error, AND we ended up 1996 * on packet boundaries, clear the error, restart the 1997 * LQI manager as appropriate, and go on our merry 1998 * way toward sending the message. Otherwise, reset 1999 * the bus to clear the error. 2000 */ 2001 ahd_set_active_fifo(ahd); 2002 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0 2003 && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) { 2004 if ((lqistat1 & LQIPHASE_LQ) != 0) { 2005 printf("LQIRETRY for LQIPHASE_LQ\n"); 2006 AHD_CORRECTABLE_ERROR(ahd); 2007 ahd_outb(ahd, LQCTL2, LQIRETRY); 2008 } else if ((lqistat1 & LQIPHASE_NLQ) != 0) { 2009 printf("LQIRETRY for LQIPHASE_NLQ\n"); 2010 AHD_CORRECTABLE_ERROR(ahd); 2011 ahd_outb(ahd, LQCTL2, LQIRETRY); 2012 } else 2013 panic("ahd_handle_lqiphase_error: No phase errors\n"); 2014 ahd_dump_card_state(ahd); 2015 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2016 ahd_unpause(ahd); 2017 } else { 2018 printf("Reseting Channel for LQI Phase error\n"); 2019 AHD_CORRECTABLE_ERROR(ahd); 2020 ahd_dump_card_state(ahd); 2021 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE); 2022 } 2023 } 2024 2025 /* 2026 * Packetized unexpected or expected busfree. 2027 * Entered in mode based on busfreetime. 2028 */ 2029 static int 2030 ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime) 2031 { 2032 u_int lqostat1; 2033 2034 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 2035 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 2036 lqostat1 = ahd_inb(ahd, LQOSTAT1); 2037 if ((lqostat1 & LQOBUSFREE) != 0) { 2038 struct scb *scb; 2039 u_int scbid; 2040 u_int saved_scbptr; 2041 u_int waiting_h; 2042 u_int waiting_t; 2043 u_int next; 2044 2045 /* 2046 * The LQO manager detected an unexpected busfree 2047 * either: 2048 * 2049 * 1) During an outgoing LQ. 2050 * 2) After an outgoing LQ but before the first 2051 * REQ of the command packet. 2052 * 3) During an outgoing command packet. 2053 * 2054 * In all cases, CURRSCB is pointing to the 2055 * SCB that encountered the failure. Clean 2056 * up the queue, clear SELDO and LQOBUSFREE, 2057 * and allow the sequencer to restart the select 2058 * out at its lesure. 2059 */ 2060 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2061 scbid = ahd_inw(ahd, CURRSCB); 2062 scb = ahd_lookup_scb(ahd, scbid); 2063 if (scb == NULL) 2064 panic("SCB not valid during LQOBUSFREE"); 2065 /* 2066 * Clear the status. 2067 */ 2068 ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE); 2069 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) 2070 ahd_outb(ahd, CLRLQOINT1, 0); 2071 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2072 ahd_flush_device_writes(ahd); 2073 ahd_outb(ahd, CLRSINT0, CLRSELDO); 2074 2075 /* 2076 * Return the LQO manager to its idle loop. It will 2077 * not do this automatically if the busfree occurs 2078 * after the first REQ of either the LQ or command 2079 * packet or between the LQ and command packet. 2080 */ 2081 ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE); 2082 2083 /* 2084 * Update the waiting for selection queue so 2085 * we restart on the correct SCB. 2086 */ 2087 waiting_h = ahd_inw(ahd, WAITING_TID_HEAD); 2088 saved_scbptr = ahd_get_scbptr(ahd); 2089 if (waiting_h != scbid) { 2090 ahd_outw(ahd, WAITING_TID_HEAD, scbid); 2091 waiting_t = ahd_inw(ahd, WAITING_TID_TAIL); 2092 if (waiting_t == waiting_h) { 2093 ahd_outw(ahd, WAITING_TID_TAIL, scbid); 2094 next = SCB_LIST_NULL; 2095 } else { 2096 ahd_set_scbptr(ahd, waiting_h); 2097 next = ahd_inw_scbram(ahd, SCB_NEXT2); 2098 } 2099 ahd_set_scbptr(ahd, scbid); 2100 ahd_outw(ahd, SCB_NEXT2, next); 2101 } 2102 ahd_set_scbptr(ahd, saved_scbptr); 2103 if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) { 2104 if (SCB_IS_SILENT(scb) == FALSE) { 2105 ahd_print_path(ahd, scb); 2106 printf("Probable outgoing LQ CRC error. " 2107 "Retrying command\n"); 2108 AHD_CORRECTABLE_ERROR(ahd); 2109 } 2110 scb->crc_retry_count++; 2111 } else { 2112 aic_set_transaction_status(scb, CAM_UNCOR_PARITY); 2113 aic_freeze_scb(scb); 2114 ahd_freeze_devq(ahd, scb); 2115 } 2116 /* Return unpausing the sequencer. */ 2117 return (0); 2118 } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) { 2119 /* 2120 * Ignore what are really parity errors that 2121 * occur on the last REQ of a free running 2122 * clock prior to going busfree. Some drives 2123 * do not properly active negate just before 2124 * going busfree resulting in a parity glitch. 2125 */ 2126 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE); 2127 #ifdef AHD_DEBUG 2128 if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0) 2129 printf("%s: Parity on last REQ detected " 2130 "during busfree phase.\n", 2131 ahd_name(ahd)); 2132 #endif 2133 /* Return unpausing the sequencer. */ 2134 return (0); 2135 } 2136 if (ahd->src_mode != AHD_MODE_SCSI) { 2137 u_int scbid; 2138 struct scb *scb; 2139 2140 scbid = ahd_get_scbptr(ahd); 2141 scb = ahd_lookup_scb(ahd, scbid); 2142 ahd_print_path(ahd, scb); 2143 printf("Unexpected PKT busfree condition\n"); 2144 AHD_UNCORRECTABLE_ERROR(ahd); 2145 ahd_dump_card_state(ahd); 2146 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A', 2147 SCB_GET_LUN(scb), SCB_GET_TAG(scb), 2148 ROLE_INITIATOR, CAM_UNEXP_BUSFREE); 2149 2150 /* Return restarting the sequencer. */ 2151 return (1); 2152 } 2153 printf("%s: Unexpected PKT busfree condition\n", ahd_name(ahd)); 2154 AHD_UNCORRECTABLE_ERROR(ahd); 2155 ahd_dump_card_state(ahd); 2156 /* Restart the sequencer. */ 2157 return (1); 2158 } 2159 2160 /* 2161 * Non-packetized unexpected or expected busfree. 2162 */ 2163 static int 2164 ahd_handle_nonpkt_busfree(struct ahd_softc *ahd) 2165 { 2166 struct ahd_devinfo devinfo; 2167 struct scb *scb; 2168 u_int lastphase; 2169 u_int saved_scsiid; 2170 u_int saved_lun; 2171 u_int target; 2172 u_int initiator_role_id; 2173 u_int scbid; 2174 u_int ppr_busfree; 2175 int printerror; 2176 2177 /* 2178 * Look at what phase we were last in. If its message out, 2179 * chances are pretty good that the busfree was in response 2180 * to one of our abort requests. 2181 */ 2182 lastphase = ahd_inb(ahd, LASTPHASE); 2183 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 2184 saved_lun = ahd_inb(ahd, SAVED_LUN); 2185 target = SCSIID_TARGET(ahd, saved_scsiid); 2186 initiator_role_id = SCSIID_OUR_ID(saved_scsiid); 2187 ahd_compile_devinfo(&devinfo, initiator_role_id, 2188 target, saved_lun, 'A', ROLE_INITIATOR); 2189 printerror = 1; 2190 2191 scbid = ahd_get_scbptr(ahd); 2192 scb = ahd_lookup_scb(ahd, scbid); 2193 if (scb != NULL 2194 && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 2195 scb = NULL; 2196 2197 ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0; 2198 if (lastphase == P_MESGOUT) { 2199 u_int tag; 2200 2201 tag = SCB_LIST_NULL; 2202 if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT_TAG, TRUE) 2203 || ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT, TRUE)) { 2204 int found; 2205 int sent_msg; 2206 2207 if (scb == NULL) { 2208 ahd_print_devinfo(ahd, &devinfo); 2209 printf("Abort for unidentified " 2210 "connection completed.\n"); 2211 /* restart the sequencer. */ 2212 return (1); 2213 } 2214 sent_msg = ahd->msgout_buf[ahd->msgout_index - 1]; 2215 ahd_print_path(ahd, scb); 2216 printf("SCB %d - Abort%s Completed.\n", 2217 SCB_GET_TAG(scb), 2218 sent_msg == MSG_ABORT_TAG ? "" : " Tag"); 2219 2220 if (sent_msg == MSG_ABORT_TAG) 2221 tag = SCB_GET_TAG(scb); 2222 2223 if ((scb->flags & SCB_CMDPHASE_ABORT) != 0) { 2224 /* 2225 * This abort is in response to an 2226 * unexpected switch to command phase 2227 * for a packetized connection. Since 2228 * the identify message was never sent, 2229 * "saved lun" is 0. We really want to 2230 * abort only the SCB that encountered 2231 * this error, which could have a different 2232 * lun. The SCB will be retried so the OS 2233 * will see the UA after renegotiating to 2234 * packetized. 2235 */ 2236 tag = SCB_GET_TAG(scb); 2237 saved_lun = scb->hscb->lun; 2238 } 2239 found = ahd_abort_scbs(ahd, target, 'A', saved_lun, 2240 tag, ROLE_INITIATOR, 2241 CAM_REQ_ABORTED); 2242 printf("found == 0x%x\n", found); 2243 printerror = 0; 2244 } else if (ahd_sent_msg(ahd, AHDMSG_1B, 2245 MSG_BUS_DEV_RESET, TRUE)) { 2246 /* 2247 * Don't mark the user's request for this BDR 2248 * as completing with CAM_BDR_SENT. CAM3 2249 * specifies CAM_REQ_CMP. 2250 */ 2251 if (scb != NULL 2252 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV 2253 && ahd_match_scb(ahd, scb, target, 'A', 2254 CAM_LUN_WILDCARD, SCB_LIST_NULL, 2255 ROLE_INITIATOR)) 2256 aic_set_transaction_status(scb, CAM_REQ_CMP); 2257 ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD, 2258 CAM_BDR_SENT, "Bus Device Reset", 2259 /*verbose_level*/0); 2260 printerror = 0; 2261 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, FALSE) 2262 && ppr_busfree == 0) { 2263 struct ahd_initiator_tinfo *tinfo; 2264 struct ahd_tmode_tstate *tstate; 2265 2266 /* 2267 * PPR Rejected. 2268 * 2269 * If the previous negotiation was packetized, 2270 * this could be because the device has been 2271 * reset without our knowledge. Force our 2272 * current negotiation to async and retry the 2273 * negotiation. Otherwise retry the command 2274 * with non-ppr negotiation. 2275 */ 2276 #ifdef AHD_DEBUG 2277 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2278 printf("PPR negotiation rejected busfree.\n"); 2279 #endif 2280 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel, 2281 devinfo.our_scsiid, 2282 devinfo.target, &tstate); 2283 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)!=0) { 2284 ahd_set_width(ahd, &devinfo, 2285 MSG_EXT_WDTR_BUS_8_BIT, 2286 AHD_TRANS_CUR, 2287 /*paused*/TRUE); 2288 ahd_set_syncrate(ahd, &devinfo, 2289 /*period*/0, /*offset*/0, 2290 /*ppr_options*/0, 2291 AHD_TRANS_CUR, 2292 /*paused*/TRUE); 2293 /* 2294 * The expect PPR busfree handler below 2295 * will effect the retry and necessary 2296 * abort. 2297 */ 2298 } else { 2299 tinfo->curr.transport_version = 2; 2300 tinfo->goal.transport_version = 2; 2301 tinfo->goal.ppr_options = 0; 2302 /* 2303 * Remove any SCBs in the waiting for selection 2304 * queue that may also be for this target so 2305 * that command ordering is preserved. 2306 */ 2307 ahd_freeze_devq(ahd, scb); 2308 ahd_qinfifo_requeue_tail(ahd, scb); 2309 printerror = 0; 2310 } 2311 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE) 2312 && ppr_busfree == 0) { 2313 /* 2314 * Negotiation Rejected. Go-narrow and 2315 * retry command. 2316 */ 2317 #ifdef AHD_DEBUG 2318 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2319 printf("WDTR negotiation rejected busfree.\n"); 2320 #endif 2321 ahd_set_width(ahd, &devinfo, 2322 MSG_EXT_WDTR_BUS_8_BIT, 2323 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2324 /*paused*/TRUE); 2325 /* 2326 * Remove any SCBs in the waiting for selection 2327 * queue that may also be for this target so that 2328 * command ordering is preserved. 2329 */ 2330 ahd_freeze_devq(ahd, scb); 2331 ahd_qinfifo_requeue_tail(ahd, scb); 2332 printerror = 0; 2333 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE) 2334 && ppr_busfree == 0) { 2335 /* 2336 * Negotiation Rejected. Go-async and 2337 * retry command. 2338 */ 2339 #ifdef AHD_DEBUG 2340 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2341 printf("SDTR negotiation rejected busfree.\n"); 2342 #endif 2343 ahd_set_syncrate(ahd, &devinfo, 2344 /*period*/0, /*offset*/0, 2345 /*ppr_options*/0, 2346 AHD_TRANS_CUR|AHD_TRANS_GOAL, 2347 /*paused*/TRUE); 2348 /* 2349 * Remove any SCBs in the waiting for selection 2350 * queue that may also be for this target so that 2351 * command ordering is preserved. 2352 */ 2353 ahd_freeze_devq(ahd, scb); 2354 ahd_qinfifo_requeue_tail(ahd, scb); 2355 printerror = 0; 2356 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0 2357 && ahd_sent_msg(ahd, AHDMSG_1B, 2358 MSG_INITIATOR_DET_ERR, TRUE)) { 2359 #ifdef AHD_DEBUG 2360 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2361 printf("Expected IDE Busfree\n"); 2362 #endif 2363 printerror = 0; 2364 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE) 2365 && ahd_sent_msg(ahd, AHDMSG_1B, 2366 MSG_MESSAGE_REJECT, TRUE)) { 2367 #ifdef AHD_DEBUG 2368 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2369 printf("Expected QAS Reject Busfree\n"); 2370 #endif 2371 printerror = 0; 2372 } 2373 } 2374 2375 /* 2376 * The busfree required flag is honored at the end of 2377 * the message phases. We check it last in case we 2378 * had to send some other message that caused a busfree. 2379 */ 2380 if (printerror != 0 2381 && (lastphase == P_MESGIN || lastphase == P_MESGOUT) 2382 && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) { 2383 ahd_freeze_devq(ahd, scb); 2384 aic_set_transaction_status(scb, CAM_REQUEUE_REQ); 2385 aic_freeze_scb(scb); 2386 if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) { 2387 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 2388 SCB_GET_CHANNEL(ahd, scb), 2389 SCB_GET_LUN(scb), SCB_LIST_NULL, 2390 ROLE_INITIATOR, CAM_REQ_ABORTED); 2391 } else { 2392 #ifdef AHD_DEBUG 2393 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 2394 printf("PPR Negotiation Busfree.\n"); 2395 #endif 2396 ahd_done(ahd, scb); 2397 } 2398 printerror = 0; 2399 } 2400 if (printerror != 0) { 2401 int aborted; 2402 2403 aborted = 0; 2404 if (scb != NULL) { 2405 u_int tag; 2406 2407 if ((scb->hscb->control & TAG_ENB) != 0) 2408 tag = SCB_GET_TAG(scb); 2409 else 2410 tag = SCB_LIST_NULL; 2411 ahd_print_path(ahd, scb); 2412 aborted = ahd_abort_scbs(ahd, target, 'A', 2413 SCB_GET_LUN(scb), tag, 2414 ROLE_INITIATOR, 2415 CAM_UNEXP_BUSFREE); 2416 } else { 2417 /* 2418 * We had not fully identified this connection, 2419 * so we cannot abort anything. 2420 */ 2421 printf("%s: ", ahd_name(ahd)); 2422 } 2423 printf("Unexpected busfree %s, %d SCBs aborted, " 2424 "PRGMCNT == 0x%x\n", 2425 ahd_lookup_phase_entry(lastphase)->phasemsg, 2426 aborted, 2427 ahd_inw(ahd, PRGMCNT)); 2428 AHD_UNCORRECTABLE_ERROR(ahd); 2429 ahd_dump_card_state(ahd); 2430 if (lastphase != P_BUSFREE) 2431 ahd_force_renegotiation(ahd, &devinfo); 2432 } 2433 /* Always restart the sequencer. */ 2434 return (1); 2435 } 2436 2437 static void 2438 ahd_handle_proto_violation(struct ahd_softc *ahd) 2439 { 2440 struct ahd_devinfo devinfo; 2441 struct scb *scb; 2442 u_int scbid; 2443 u_int seq_flags; 2444 u_int curphase; 2445 u_int lastphase; 2446 int found; 2447 2448 ahd_fetch_devinfo(ahd, &devinfo); 2449 scbid = ahd_get_scbptr(ahd); 2450 scb = ahd_lookup_scb(ahd, scbid); 2451 seq_flags = ahd_inb(ahd, SEQ_FLAGS); 2452 curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK; 2453 lastphase = ahd_inb(ahd, LASTPHASE); 2454 if ((seq_flags & NOT_IDENTIFIED) != 0) { 2455 /* 2456 * The reconnecting target either did not send an 2457 * identify message, or did, but we didn't find an SCB 2458 * to match. 2459 */ 2460 ahd_print_devinfo(ahd, &devinfo); 2461 printf("Target did not send an IDENTIFY message. " 2462 "LASTPHASE = 0x%x.\n", lastphase); 2463 AHD_UNCORRECTABLE_ERROR(ahd); 2464 scb = NULL; 2465 } else if (scb == NULL) { 2466 /* 2467 * We don't seem to have an SCB active for this 2468 * transaction. Print an error and reset the bus. 2469 */ 2470 ahd_print_devinfo(ahd, &devinfo); 2471 printf("No SCB found during protocol violation\n"); 2472 AHD_UNCORRECTABLE_ERROR(ahd); 2473 goto proto_violation_reset; 2474 } else { 2475 aic_set_transaction_status(scb, CAM_SEQUENCE_FAIL); 2476 if ((seq_flags & NO_CDB_SENT) != 0) { 2477 ahd_print_path(ahd, scb); 2478 printf("No or incomplete CDB sent to device.\n"); 2479 AHD_UNCORRECTABLE_ERROR(ahd); 2480 } else if ((ahd_inb_scbram(ahd, SCB_CONTROL) 2481 & STATUS_RCVD) == 0) { 2482 /* 2483 * The target never bothered to provide status to 2484 * us prior to completing the command. Since we don't 2485 * know the disposition of this command, we must attempt 2486 * to abort it. Assert ATN and prepare to send an abort 2487 * message. 2488 */ 2489 ahd_print_path(ahd, scb); 2490 printf("Completed command without status.\n"); 2491 } else { 2492 ahd_print_path(ahd, scb); 2493 printf("Unknown protocol violation.\n"); 2494 AHD_UNCORRECTABLE_ERROR(ahd); 2495 ahd_dump_card_state(ahd); 2496 } 2497 } 2498 if ((lastphase & ~P_DATAIN_DT) == 0 2499 || lastphase == P_COMMAND) { 2500 proto_violation_reset: 2501 /* 2502 * Target either went directly to data 2503 * phase or didn't respond to our ATN. 2504 * The only safe thing to do is to blow 2505 * it away with a bus reset. 2506 */ 2507 found = ahd_reset_channel(ahd, 'A', TRUE); 2508 printf("%s: Issued Channel %c Bus Reset. " 2509 "%d SCBs aborted\n", ahd_name(ahd), 'A', found); 2510 AHD_UNCORRECTABLE_ERROR(ahd); 2511 } else { 2512 /* 2513 * Leave the selection hardware off in case 2514 * this abort attempt will affect yet to 2515 * be sent commands. 2516 */ 2517 ahd_outb(ahd, SCSISEQ0, 2518 ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 2519 ahd_assert_atn(ahd); 2520 ahd_outb(ahd, MSG_OUT, HOST_MSG); 2521 if (scb == NULL) { 2522 ahd_print_devinfo(ahd, &devinfo); 2523 ahd->msgout_buf[0] = MSG_ABORT_TASK; 2524 ahd->msgout_len = 1; 2525 ahd->msgout_index = 0; 2526 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2527 } else { 2528 ahd_print_path(ahd, scb); 2529 scb->flags |= SCB_ABORT; 2530 } 2531 printf("Protocol violation %s. Attempting to abort.\n", 2532 ahd_lookup_phase_entry(curphase)->phasemsg); 2533 AHD_UNCORRECTABLE_ERROR(ahd); 2534 } 2535 } 2536 2537 /* 2538 * Force renegotiation to occur the next time we initiate 2539 * a command to the current device. 2540 */ 2541 static void 2542 ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 2543 { 2544 struct ahd_initiator_tinfo *targ_info; 2545 struct ahd_tmode_tstate *tstate; 2546 2547 #ifdef AHD_DEBUG 2548 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 2549 ahd_print_devinfo(ahd, devinfo); 2550 printf("Forcing renegotiation\n"); 2551 } 2552 #endif 2553 targ_info = ahd_fetch_transinfo(ahd, 2554 devinfo->channel, 2555 devinfo->our_scsiid, 2556 devinfo->target, 2557 &tstate); 2558 ahd_update_neg_request(ahd, devinfo, tstate, 2559 targ_info, AHD_NEG_IF_NON_ASYNC); 2560 } 2561 2562 #define AHD_MAX_STEPS 2000 2563 void 2564 ahd_clear_critical_section(struct ahd_softc *ahd) 2565 { 2566 ahd_mode_state saved_modes; 2567 int stepping; 2568 int steps; 2569 int first_instr; 2570 u_int simode0; 2571 u_int simode1; 2572 u_int simode3; 2573 u_int lqimode0; 2574 u_int lqimode1; 2575 u_int lqomode0; 2576 u_int lqomode1; 2577 2578 if (ahd->num_critical_sections == 0) 2579 return; 2580 2581 stepping = FALSE; 2582 steps = 0; 2583 first_instr = 0; 2584 simode0 = 0; 2585 simode1 = 0; 2586 simode3 = 0; 2587 lqimode0 = 0; 2588 lqimode1 = 0; 2589 lqomode0 = 0; 2590 lqomode1 = 0; 2591 saved_modes = ahd_save_modes(ahd); 2592 for (;;) { 2593 struct cs *cs; 2594 u_int seqaddr; 2595 u_int i; 2596 2597 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2598 seqaddr = ahd_inw(ahd, CURADDR); 2599 2600 cs = ahd->critical_sections; 2601 for (i = 0; i < ahd->num_critical_sections; i++, cs++) { 2602 2603 if (cs->begin < seqaddr && cs->end >= seqaddr) 2604 break; 2605 } 2606 2607 if (i == ahd->num_critical_sections) 2608 break; 2609 2610 if (steps > AHD_MAX_STEPS) { 2611 printf("%s: Infinite loop in critical section\n" 2612 "%s: First Instruction 0x%x now 0x%x\n", 2613 ahd_name(ahd), ahd_name(ahd), first_instr, 2614 seqaddr); 2615 AHD_FATAL_ERROR(ahd); 2616 ahd_dump_card_state(ahd); 2617 panic("critical section loop"); 2618 } 2619 2620 steps++; 2621 #ifdef AHD_DEBUG 2622 if ((ahd_debug & AHD_SHOW_MISC) != 0) 2623 printf("%s: Single stepping at 0x%x\n", ahd_name(ahd), 2624 seqaddr); 2625 #endif 2626 if (stepping == FALSE) { 2627 first_instr = seqaddr; 2628 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2629 simode0 = ahd_inb(ahd, SIMODE0); 2630 simode3 = ahd_inb(ahd, SIMODE3); 2631 lqimode0 = ahd_inb(ahd, LQIMODE0); 2632 lqimode1 = ahd_inb(ahd, LQIMODE1); 2633 lqomode0 = ahd_inb(ahd, LQOMODE0); 2634 lqomode1 = ahd_inb(ahd, LQOMODE1); 2635 ahd_outb(ahd, SIMODE0, 0); 2636 ahd_outb(ahd, SIMODE3, 0); 2637 ahd_outb(ahd, LQIMODE0, 0); 2638 ahd_outb(ahd, LQIMODE1, 0); 2639 ahd_outb(ahd, LQOMODE0, 0); 2640 ahd_outb(ahd, LQOMODE1, 0); 2641 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2642 simode1 = ahd_inb(ahd, SIMODE1); 2643 /* 2644 * We don't clear ENBUSFREE. Unfortunately 2645 * we cannot re-enable busfree detection within 2646 * the current connection, so we must leave it 2647 * on while single stepping. 2648 */ 2649 ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE); 2650 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP); 2651 stepping = TRUE; 2652 } 2653 ahd_outb(ahd, CLRSINT1, CLRBUSFREE); 2654 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2655 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 2656 ahd_outb(ahd, HCNTRL, ahd->unpause); 2657 while (!ahd_is_paused(ahd)) 2658 aic_delay(200); 2659 ahd_update_modes(ahd); 2660 } 2661 if (stepping) { 2662 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 2663 ahd_outb(ahd, SIMODE0, simode0); 2664 ahd_outb(ahd, SIMODE3, simode3); 2665 ahd_outb(ahd, LQIMODE0, lqimode0); 2666 ahd_outb(ahd, LQIMODE1, lqimode1); 2667 ahd_outb(ahd, LQOMODE0, lqomode0); 2668 ahd_outb(ahd, LQOMODE1, lqomode1); 2669 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 2670 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP); 2671 ahd_outb(ahd, SIMODE1, simode1); 2672 /* 2673 * SCSIINT seems to glitch occasionally when 2674 * the interrupt masks are restored. Clear SCSIINT 2675 * one more time so that only persistent errors 2676 * are seen as a real interrupt. 2677 */ 2678 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2679 } 2680 ahd_restore_modes(ahd, saved_modes); 2681 } 2682 2683 /* 2684 * Clear any pending interrupt status. 2685 */ 2686 void 2687 ahd_clear_intstat(struct ahd_softc *ahd) 2688 { 2689 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 2690 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 2691 /* Clear any interrupt conditions this may have caused */ 2692 ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2 2693 |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD); 2694 ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT 2695 |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI 2696 |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ); 2697 ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ 2698 |CLRLQOATNPKT|CLRLQOTCRC); 2699 ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS 2700 |CLRLQOBUSFREE|CLRLQOPHACHGINPKT); 2701 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) { 2702 ahd_outb(ahd, CLRLQOINT0, 0); 2703 ahd_outb(ahd, CLRLQOINT1, 0); 2704 } 2705 ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR); 2706 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI 2707 |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT); 2708 ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO 2709 |CLRIOERR|CLROVERRUN); 2710 ahd_outb(ahd, CLRINT, CLRSCSIINT); 2711 } 2712 2713 /**************************** Debugging Routines ******************************/ 2714 #ifdef AHD_DEBUG 2715 uint32_t ahd_debug = AHD_DEBUG_OPTS; 2716 #endif 2717 void 2718 ahd_print_scb(struct scb *scb) 2719 { 2720 struct hardware_scb *hscb; 2721 int i; 2722 2723 hscb = scb->hscb; 2724 printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n", 2725 (void *)scb, 2726 hscb->control, 2727 hscb->scsiid, 2728 hscb->lun, 2729 hscb->cdb_len); 2730 printf("Shared Data: "); 2731 for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++) 2732 printf("%#02x", hscb->shared_data.idata.cdb[i]); 2733 printf(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n", 2734 (uint32_t)((aic_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF), 2735 (uint32_t)(aic_le64toh(hscb->dataptr) & 0xFFFFFFFF), 2736 aic_le32toh(hscb->datacnt), 2737 aic_le32toh(hscb->sgptr), 2738 SCB_GET_TAG(scb)); 2739 ahd_dump_sglist(scb); 2740 } 2741 2742 void 2743 ahd_dump_sglist(struct scb *scb) 2744 { 2745 int i; 2746 2747 if (scb->sg_count > 0) { 2748 if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) { 2749 struct ahd_dma64_seg *sg_list; 2750 2751 sg_list = (struct ahd_dma64_seg*)scb->sg_list; 2752 for (i = 0; i < scb->sg_count; i++) { 2753 uint64_t addr; 2754 2755 addr = aic_le64toh(sg_list[i].addr); 2756 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2757 i, 2758 (uint32_t)((addr >> 32) & 0xFFFFFFFF), 2759 (uint32_t)(addr & 0xFFFFFFFF), 2760 sg_list[i].len & AHD_SG_LEN_MASK, 2761 (sg_list[i].len & AHD_DMA_LAST_SEG) 2762 ? " Last" : ""); 2763 } 2764 } else { 2765 struct ahd_dma_seg *sg_list; 2766 2767 sg_list = (struct ahd_dma_seg*)scb->sg_list; 2768 for (i = 0; i < scb->sg_count; i++) { 2769 uint32_t len; 2770 2771 len = aic_le32toh(sg_list[i].len); 2772 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n", 2773 i, 2774 (len & AHD_SG_HIGH_ADDR_MASK) >> 24, 2775 aic_le32toh(sg_list[i].addr), 2776 len & AHD_SG_LEN_MASK, 2777 len & AHD_DMA_LAST_SEG ? " Last" : ""); 2778 } 2779 } 2780 } 2781 } 2782 2783 /************************* Transfer Negotiation *******************************/ 2784 /* 2785 * Allocate per target mode instance (ID we respond to as a target) 2786 * transfer negotiation data structures. 2787 */ 2788 static struct ahd_tmode_tstate * 2789 ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel) 2790 { 2791 struct ahd_tmode_tstate *master_tstate; 2792 struct ahd_tmode_tstate *tstate; 2793 int i; 2794 2795 master_tstate = ahd->enabled_targets[ahd->our_id]; 2796 if (ahd->enabled_targets[scsi_id] != NULL 2797 && ahd->enabled_targets[scsi_id] != master_tstate) 2798 panic("%s: ahd_alloc_tstate - Target already allocated", 2799 ahd_name(ahd)); 2800 tstate = malloc(sizeof(*tstate), M_DEVBUF, M_NOWAIT); 2801 if (tstate == NULL) 2802 return (NULL); 2803 2804 /* 2805 * If we have allocated a master tstate, copy user settings from 2806 * the master tstate (taken from SRAM or the EEPROM) for this 2807 * channel, but reset our current and goal settings to async/narrow 2808 * until an initiator talks to us. 2809 */ 2810 if (master_tstate != NULL) { 2811 memcpy(tstate, master_tstate, sizeof(*tstate)); 2812 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns)); 2813 for (i = 0; i < 16; i++) { 2814 memset(&tstate->transinfo[i].curr, 0, 2815 sizeof(tstate->transinfo[i].curr)); 2816 memset(&tstate->transinfo[i].goal, 0, 2817 sizeof(tstate->transinfo[i].goal)); 2818 } 2819 } else 2820 memset(tstate, 0, sizeof(*tstate)); 2821 ahd->enabled_targets[scsi_id] = tstate; 2822 return (tstate); 2823 } 2824 2825 #ifdef AHD_TARGET_MODE 2826 /* 2827 * Free per target mode instance (ID we respond to as a target) 2828 * transfer negotiation data structures. 2829 */ 2830 static void 2831 ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force) 2832 { 2833 struct ahd_tmode_tstate *tstate; 2834 2835 /* 2836 * Don't clean up our "master" tstate. 2837 * It has our default user settings. 2838 */ 2839 if (scsi_id == ahd->our_id 2840 && force == FALSE) 2841 return; 2842 2843 tstate = ahd->enabled_targets[scsi_id]; 2844 if (tstate != NULL) 2845 free(tstate, M_DEVBUF); 2846 ahd->enabled_targets[scsi_id] = NULL; 2847 } 2848 #endif 2849 2850 /* 2851 * Called when we have an active connection to a target on the bus, 2852 * this function finds the nearest period to the input period limited 2853 * by the capabilities of the bus connectivity of and sync settings for 2854 * the target. 2855 */ 2856 void 2857 ahd_devlimited_syncrate(struct ahd_softc *ahd, 2858 struct ahd_initiator_tinfo *tinfo, 2859 u_int *period, u_int *ppr_options, role_t role) 2860 { 2861 struct ahd_transinfo *transinfo; 2862 u_int maxsync; 2863 2864 if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0 2865 && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) { 2866 maxsync = AHD_SYNCRATE_PACED; 2867 } else { 2868 maxsync = AHD_SYNCRATE_ULTRA; 2869 /* Can't do DT related options on an SE bus */ 2870 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2871 } 2872 /* 2873 * Never allow a value higher than our current goal 2874 * period otherwise we may allow a target initiated 2875 * negotiation to go above the limit as set by the 2876 * user. In the case of an initiator initiated 2877 * sync negotiation, we limit based on the user 2878 * setting. This allows the system to still accept 2879 * incoming negotiations even if target initiated 2880 * negotiation is not performed. 2881 */ 2882 if (role == ROLE_TARGET) 2883 transinfo = &tinfo->user; 2884 else 2885 transinfo = &tinfo->goal; 2886 *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN); 2887 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) { 2888 maxsync = MAX(maxsync, AHD_SYNCRATE_ULTRA2); 2889 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2890 } 2891 if (transinfo->period == 0) { 2892 *period = 0; 2893 *ppr_options = 0; 2894 } else { 2895 *period = MAX(*period, transinfo->period); 2896 ahd_find_syncrate(ahd, period, ppr_options, maxsync); 2897 } 2898 } 2899 2900 /* 2901 * Look up the valid period to SCSIRATE conversion in our table. 2902 * Return the period and offset that should be sent to the target 2903 * if this was the beginning of an SDTR. 2904 */ 2905 void 2906 ahd_find_syncrate(struct ahd_softc *ahd, u_int *period, 2907 u_int *ppr_options, u_int maxsync) 2908 { 2909 if (*period < maxsync) 2910 *period = maxsync; 2911 2912 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0 2913 && *period > AHD_SYNCRATE_MIN_DT) 2914 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 2915 2916 if (*period > AHD_SYNCRATE_MIN) 2917 *period = 0; 2918 2919 /* Honor PPR option conformance rules. */ 2920 if (*period > AHD_SYNCRATE_PACED) 2921 *ppr_options &= ~MSG_EXT_PPR_RTI; 2922 2923 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 2924 *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ); 2925 2926 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0) 2927 *ppr_options &= MSG_EXT_PPR_QAS_REQ; 2928 2929 /* Skip all PACED only entries if IU is not available */ 2930 if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0 2931 && *period < AHD_SYNCRATE_DT) 2932 *period = AHD_SYNCRATE_DT; 2933 2934 /* Skip all DT only entries if DT is not available */ 2935 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0 2936 && *period < AHD_SYNCRATE_ULTRA2) 2937 *period = AHD_SYNCRATE_ULTRA2; 2938 } 2939 2940 /* 2941 * Truncate the given synchronous offset to a value the 2942 * current adapter type and syncrate are capable of. 2943 */ 2944 void 2945 ahd_validate_offset(struct ahd_softc *ahd, 2946 struct ahd_initiator_tinfo *tinfo, 2947 u_int period, u_int *offset, int wide, 2948 role_t role) 2949 { 2950 u_int maxoffset; 2951 2952 /* Limit offset to what we can do */ 2953 if (period == 0) 2954 maxoffset = 0; 2955 else if (period <= AHD_SYNCRATE_PACED) { 2956 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) 2957 maxoffset = MAX_OFFSET_PACED_BUG; 2958 else 2959 maxoffset = MAX_OFFSET_PACED; 2960 } else 2961 maxoffset = MAX_OFFSET_NON_PACED; 2962 *offset = MIN(*offset, maxoffset); 2963 if (tinfo != NULL) { 2964 if (role == ROLE_TARGET) 2965 *offset = MIN(*offset, tinfo->user.offset); 2966 else 2967 *offset = MIN(*offset, tinfo->goal.offset); 2968 } 2969 } 2970 2971 /* 2972 * Truncate the given transfer width parameter to a value the 2973 * current adapter type is capable of. 2974 */ 2975 void 2976 ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo, 2977 u_int *bus_width, role_t role) 2978 { 2979 switch (*bus_width) { 2980 default: 2981 if (ahd->features & AHD_WIDE) { 2982 /* Respond Wide */ 2983 *bus_width = MSG_EXT_WDTR_BUS_16_BIT; 2984 break; 2985 } 2986 /* FALLTHROUGH */ 2987 case MSG_EXT_WDTR_BUS_8_BIT: 2988 *bus_width = MSG_EXT_WDTR_BUS_8_BIT; 2989 break; 2990 } 2991 if (tinfo != NULL) { 2992 if (role == ROLE_TARGET) 2993 *bus_width = MIN(tinfo->user.width, *bus_width); 2994 else 2995 *bus_width = MIN(tinfo->goal.width, *bus_width); 2996 } 2997 } 2998 2999 /* 3000 * Update the bitmask of targets for which the controller should 3001 * negotiate with at the next convenient opportunity. This currently 3002 * means the next time we send the initial identify messages for 3003 * a new transaction. 3004 */ 3005 int 3006 ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3007 struct ahd_tmode_tstate *tstate, 3008 struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type) 3009 { 3010 u_int auto_negotiate_orig; 3011 3012 auto_negotiate_orig = tstate->auto_negotiate; 3013 if (neg_type == AHD_NEG_ALWAYS) { 3014 /* 3015 * Force our "current" settings to be 3016 * unknown so that unless a bus reset 3017 * occurs the need to renegotiate is 3018 * recorded persistently. 3019 */ 3020 if ((ahd->features & AHD_WIDE) != 0) 3021 tinfo->curr.width = AHD_WIDTH_UNKNOWN; 3022 tinfo->curr.period = AHD_PERIOD_UNKNOWN; 3023 tinfo->curr.offset = AHD_OFFSET_UNKNOWN; 3024 } 3025 if (tinfo->curr.period != tinfo->goal.period 3026 || tinfo->curr.width != tinfo->goal.width 3027 || tinfo->curr.offset != tinfo->goal.offset 3028 || tinfo->curr.ppr_options != tinfo->goal.ppr_options 3029 || (neg_type == AHD_NEG_IF_NON_ASYNC 3030 && (tinfo->goal.offset != 0 3031 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT 3032 || tinfo->goal.ppr_options != 0))) 3033 tstate->auto_negotiate |= devinfo->target_mask; 3034 else 3035 tstate->auto_negotiate &= ~devinfo->target_mask; 3036 3037 return (auto_negotiate_orig != tstate->auto_negotiate); 3038 } 3039 3040 /* 3041 * Update the user/goal/curr tables of synchronous negotiation 3042 * parameters as well as, in the case of a current or active update, 3043 * any data structures on the host controller. In the case of an 3044 * active update, the specified target is currently talking to us on 3045 * the bus, so the transfer parameter update must take effect 3046 * immediately. 3047 */ 3048 void 3049 ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3050 u_int period, u_int offset, u_int ppr_options, 3051 u_int type, int paused) 3052 { 3053 struct ahd_initiator_tinfo *tinfo; 3054 struct ahd_tmode_tstate *tstate; 3055 u_int old_period; 3056 u_int old_offset; 3057 u_int old_ppr; 3058 int active; 3059 int update_needed; 3060 3061 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 3062 update_needed = 0; 3063 3064 if (period == 0 || offset == 0) { 3065 period = 0; 3066 offset = 0; 3067 } 3068 3069 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3070 devinfo->target, &tstate); 3071 3072 if ((type & AHD_TRANS_USER) != 0) { 3073 tinfo->user.period = period; 3074 tinfo->user.offset = offset; 3075 tinfo->user.ppr_options = ppr_options; 3076 } 3077 3078 if ((type & AHD_TRANS_GOAL) != 0) { 3079 tinfo->goal.period = period; 3080 tinfo->goal.offset = offset; 3081 tinfo->goal.ppr_options = ppr_options; 3082 } 3083 3084 old_period = tinfo->curr.period; 3085 old_offset = tinfo->curr.offset; 3086 old_ppr = tinfo->curr.ppr_options; 3087 3088 if ((type & AHD_TRANS_CUR) != 0 3089 && (old_period != period 3090 || old_offset != offset 3091 || old_ppr != ppr_options)) { 3092 update_needed++; 3093 3094 tinfo->curr.period = period; 3095 tinfo->curr.offset = offset; 3096 tinfo->curr.ppr_options = ppr_options; 3097 3098 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3099 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3100 if (bootverbose) { 3101 if (offset != 0) { 3102 int options; 3103 3104 printf("%s: target %d synchronous with " 3105 "period = 0x%x, offset = 0x%x", 3106 ahd_name(ahd), devinfo->target, 3107 period, offset); 3108 options = 0; 3109 if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) { 3110 printf("(RDSTRM"); 3111 options++; 3112 } 3113 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) { 3114 printf("%s", options ? "|DT" : "(DT"); 3115 options++; 3116 } 3117 if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) { 3118 printf("%s", options ? "|IU" : "(IU"); 3119 options++; 3120 } 3121 if ((ppr_options & MSG_EXT_PPR_RTI) != 0) { 3122 printf("%s", options ? "|RTI" : "(RTI"); 3123 options++; 3124 } 3125 if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) { 3126 printf("%s", options ? "|QAS" : "(QAS"); 3127 options++; 3128 } 3129 if (options != 0) 3130 printf(")\n"); 3131 else 3132 printf("\n"); 3133 } else { 3134 printf("%s: target %d using " 3135 "asynchronous transfers%s\n", 3136 ahd_name(ahd), devinfo->target, 3137 (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0 3138 ? "(QAS)" : ""); 3139 } 3140 } 3141 } 3142 /* 3143 * Always refresh the neg-table to handle the case of the 3144 * sequencer setting the ENATNO bit for a MK_MESSAGE request. 3145 * We will always renegotiate in that case if this is a 3146 * packetized request. Also manage the busfree expected flag 3147 * from this common routine so that we catch changes due to 3148 * WDTR or SDTR messages. 3149 */ 3150 if ((type & AHD_TRANS_CUR) != 0) { 3151 if (!paused) 3152 ahd_pause(ahd); 3153 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3154 if (!paused) 3155 ahd_unpause(ahd); 3156 if (ahd->msg_type != MSG_TYPE_NONE) { 3157 if ((old_ppr & MSG_EXT_PPR_IU_REQ) 3158 != (ppr_options & MSG_EXT_PPR_IU_REQ)) { 3159 #ifdef AHD_DEBUG 3160 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3161 ahd_print_devinfo(ahd, devinfo); 3162 printf("Expecting IU Change busfree\n"); 3163 } 3164 #endif 3165 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 3166 | MSG_FLAG_IU_REQ_CHANGED; 3167 } 3168 if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) { 3169 #ifdef AHD_DEBUG 3170 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3171 printf("PPR with IU_REQ outstanding\n"); 3172 #endif 3173 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE; 3174 } 3175 } 3176 } 3177 3178 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3179 tinfo, AHD_NEG_TO_GOAL); 3180 3181 if (update_needed && active) 3182 ahd_update_pending_scbs(ahd); 3183 } 3184 3185 /* 3186 * Update the user/goal/curr tables of wide negotiation 3187 * parameters as well as, in the case of a current or active update, 3188 * any data structures on the host controller. In the case of an 3189 * active update, the specified target is currently talking to us on 3190 * the bus, so the transfer parameter update must take effect 3191 * immediately. 3192 */ 3193 void 3194 ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3195 u_int width, u_int type, int paused) 3196 { 3197 struct ahd_initiator_tinfo *tinfo; 3198 struct ahd_tmode_tstate *tstate; 3199 u_int oldwidth; 3200 int active; 3201 int update_needed; 3202 3203 active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE; 3204 update_needed = 0; 3205 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3206 devinfo->target, &tstate); 3207 3208 if ((type & AHD_TRANS_USER) != 0) 3209 tinfo->user.width = width; 3210 3211 if ((type & AHD_TRANS_GOAL) != 0) 3212 tinfo->goal.width = width; 3213 3214 oldwidth = tinfo->curr.width; 3215 if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) { 3216 update_needed++; 3217 3218 tinfo->curr.width = width; 3219 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3220 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 3221 if (bootverbose) { 3222 printf("%s: target %d using %dbit transfers\n", 3223 ahd_name(ahd), devinfo->target, 3224 8 * (0x01 << width)); 3225 } 3226 } 3227 3228 if ((type & AHD_TRANS_CUR) != 0) { 3229 if (!paused) 3230 ahd_pause(ahd); 3231 ahd_update_neg_table(ahd, devinfo, &tinfo->curr); 3232 if (!paused) 3233 ahd_unpause(ahd); 3234 } 3235 3236 update_needed += ahd_update_neg_request(ahd, devinfo, tstate, 3237 tinfo, AHD_NEG_TO_GOAL); 3238 if (update_needed && active) 3239 ahd_update_pending_scbs(ahd); 3240 3241 } 3242 3243 /* 3244 * Update the current state of tagged queuing for a given target. 3245 */ 3246 void 3247 ahd_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3248 ahd_queue_alg alg) 3249 { 3250 ahd_platform_set_tags(ahd, devinfo, alg); 3251 ahd_send_async(ahd, devinfo->channel, devinfo->target, 3252 devinfo->lun, AC_TRANSFER_NEG, &alg); 3253 } 3254 3255 static void 3256 ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3257 struct ahd_transinfo *tinfo) 3258 { 3259 ahd_mode_state saved_modes; 3260 u_int period; 3261 u_int ppr_opts; 3262 u_int con_opts; 3263 u_int offset; 3264 u_int saved_negoaddr; 3265 uint8_t iocell_opts[sizeof(ahd->iocell_opts)]; 3266 3267 saved_modes = ahd_save_modes(ahd); 3268 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3269 3270 saved_negoaddr = ahd_inb(ahd, NEGOADDR); 3271 ahd_outb(ahd, NEGOADDR, devinfo->target); 3272 period = tinfo->period; 3273 offset = tinfo->offset; 3274 memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts)); 3275 ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ 3276 |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI); 3277 con_opts = 0; 3278 if (period == 0) 3279 period = AHD_SYNCRATE_ASYNC; 3280 if (period == AHD_SYNCRATE_160) { 3281 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 3282 /* 3283 * When the SPI4 spec was finalized, PACE transfers 3284 * was not made a configurable option in the PPR 3285 * message. Instead it is assumed to be enabled for 3286 * any syncrate faster than 80MHz. Nevertheless, 3287 * Harpoon2A4 allows this to be configurable. 3288 * 3289 * Harpoon2A4 also assumes at most 2 data bytes per 3290 * negotiated REQ/ACK offset. Paced transfers take 3291 * 4, so we must adjust our offset. 3292 */ 3293 ppr_opts |= PPROPT_PACE; 3294 offset *= 2; 3295 3296 /* 3297 * Harpoon2A assumed that there would be a 3298 * fallback rate between 160MHz and 80Mhz, 3299 * so 7 is used as the period factor rather 3300 * than 8 for 160MHz. 3301 */ 3302 period = AHD_SYNCRATE_REVA_160; 3303 } 3304 if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0) 3305 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 3306 ~AHD_PRECOMP_MASK; 3307 } else { 3308 /* 3309 * Precomp should be disabled for non-paced transfers. 3310 */ 3311 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK; 3312 3313 if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0 3314 && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0 3315 && (ppr_opts & MSG_EXT_PPR_IU_REQ) == 0) { 3316 /* 3317 * Slow down our CRC interval to be 3318 * compatible with non-packetized 3319 * U160 devices that can't handle a 3320 * CRC at full speed. 3321 */ 3322 con_opts |= ENSLOWCRC; 3323 } 3324 3325 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) { 3326 /* 3327 * On H2A4, revert to a slower slewrate 3328 * on non-paced transfers. 3329 */ 3330 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= 3331 ~AHD_SLEWRATE_MASK; 3332 } 3333 } 3334 3335 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW); 3336 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]); 3337 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE); 3338 ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]); 3339 3340 ahd_outb(ahd, NEGPERIOD, period); 3341 ahd_outb(ahd, NEGPPROPTS, ppr_opts); 3342 ahd_outb(ahd, NEGOFFSET, offset); 3343 3344 if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT) 3345 con_opts |= WIDEXFER; 3346 3347 /* 3348 * During packetized transfers, the target will 3349 * give us the opportunity to send command packets 3350 * without us asserting attention. 3351 */ 3352 if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0) 3353 con_opts |= ENAUTOATNO; 3354 ahd_outb(ahd, NEGCONOPTS, con_opts); 3355 ahd_outb(ahd, NEGOADDR, saved_negoaddr); 3356 ahd_restore_modes(ahd, saved_modes); 3357 } 3358 3359 /* 3360 * When the transfer settings for a connection change, setup for 3361 * negotiation in pending SCBs to effect the change as quickly as 3362 * possible. We also cancel any negotiations that are scheduled 3363 * for inflight SCBs that have not been started yet. 3364 */ 3365 static void 3366 ahd_update_pending_scbs(struct ahd_softc *ahd) 3367 { 3368 struct scb *pending_scb; 3369 int pending_scb_count; 3370 int paused; 3371 u_int saved_scbptr; 3372 ahd_mode_state saved_modes; 3373 3374 /* 3375 * Traverse the pending SCB list and ensure that all of the 3376 * SCBs there have the proper settings. We can only safely 3377 * clear the negotiation required flag (setting requires the 3378 * execution queue to be modified) and this is only possible 3379 * if we are not already attempting to select out for this 3380 * SCB. For this reason, all callers only call this routine 3381 * if we are changing the negotiation settings for the currently 3382 * active transaction on the bus. 3383 */ 3384 pending_scb_count = 0; 3385 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 3386 struct ahd_devinfo devinfo; 3387 struct ahd_tmode_tstate *tstate; 3388 3389 ahd_scb_devinfo(ahd, &devinfo, pending_scb); 3390 ahd_fetch_transinfo(ahd, devinfo.channel, 3391 devinfo.our_scsiid, 3392 devinfo.target, &tstate); 3393 if ((tstate->auto_negotiate & devinfo.target_mask) == 0 3394 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) { 3395 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE; 3396 pending_scb->hscb->control &= ~MK_MESSAGE; 3397 } 3398 ahd_sync_scb(ahd, pending_scb, 3399 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 3400 pending_scb_count++; 3401 } 3402 3403 if (pending_scb_count == 0) 3404 return; 3405 3406 if (ahd_is_paused(ahd)) { 3407 paused = 1; 3408 } else { 3409 paused = 0; 3410 ahd_pause(ahd); 3411 } 3412 3413 /* 3414 * Force the sequencer to reinitialize the selection for 3415 * the command at the head of the execution queue if it 3416 * has already been setup. The negotiation changes may 3417 * effect whether we select-out with ATN. It is only 3418 * safe to clear ENSELO when the bus is not free and no 3419 * selection is in progres or completed. 3420 */ 3421 saved_modes = ahd_save_modes(ahd); 3422 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3423 if ((ahd_inb(ahd, SCSISIGI) & BSYI) != 0 3424 && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0) 3425 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO); 3426 saved_scbptr = ahd_get_scbptr(ahd); 3427 /* Ensure that the hscbs down on the card match the new information */ 3428 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { 3429 u_int scb_tag; 3430 u_int control; 3431 3432 scb_tag = SCB_GET_TAG(pending_scb); 3433 ahd_set_scbptr(ahd, scb_tag); 3434 control = ahd_inb_scbram(ahd, SCB_CONTROL); 3435 control &= ~MK_MESSAGE; 3436 control |= pending_scb->hscb->control & MK_MESSAGE; 3437 ahd_outb(ahd, SCB_CONTROL, control); 3438 } 3439 ahd_set_scbptr(ahd, saved_scbptr); 3440 ahd_restore_modes(ahd, saved_modes); 3441 3442 if (paused == 0) 3443 ahd_unpause(ahd); 3444 } 3445 3446 /**************************** Pathing Information *****************************/ 3447 static void 3448 ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3449 { 3450 ahd_mode_state saved_modes; 3451 u_int saved_scsiid; 3452 role_t role; 3453 int our_id; 3454 3455 saved_modes = ahd_save_modes(ahd); 3456 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3457 3458 if (ahd_inb(ahd, SSTAT0) & TARGET) 3459 role = ROLE_TARGET; 3460 else 3461 role = ROLE_INITIATOR; 3462 3463 if (role == ROLE_TARGET 3464 && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) { 3465 /* We were selected, so pull our id from TARGIDIN */ 3466 our_id = ahd_inb(ahd, TARGIDIN) & OID; 3467 } else if (role == ROLE_TARGET) 3468 our_id = ahd_inb(ahd, TOWNID); 3469 else 3470 our_id = ahd_inb(ahd, IOWNID); 3471 3472 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); 3473 ahd_compile_devinfo(devinfo, 3474 our_id, 3475 SCSIID_TARGET(ahd, saved_scsiid), 3476 ahd_inb(ahd, SAVED_LUN), 3477 SCSIID_CHANNEL(ahd, saved_scsiid), 3478 role); 3479 ahd_restore_modes(ahd, saved_modes); 3480 } 3481 3482 void 3483 ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3484 { 3485 printf("%s:%c:%d:%d: ", ahd_name(ahd), 'A', 3486 devinfo->target, devinfo->lun); 3487 } 3488 3489 struct ahd_phase_table_entry* 3490 ahd_lookup_phase_entry(int phase) 3491 { 3492 struct ahd_phase_table_entry *entry; 3493 struct ahd_phase_table_entry *last_entry; 3494 3495 /* 3496 * num_phases doesn't include the default entry which 3497 * will be returned if the phase doesn't match. 3498 */ 3499 last_entry = &ahd_phase_table[num_phases]; 3500 for (entry = ahd_phase_table; entry < last_entry; entry++) { 3501 if (phase == entry->phase) 3502 break; 3503 } 3504 return (entry); 3505 } 3506 3507 void 3508 ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target, 3509 u_int lun, char channel, role_t role) 3510 { 3511 devinfo->our_scsiid = our_id; 3512 devinfo->target = target; 3513 devinfo->lun = lun; 3514 devinfo->target_offset = target; 3515 devinfo->channel = channel; 3516 devinfo->role = role; 3517 if (channel == 'B') 3518 devinfo->target_offset += 8; 3519 devinfo->target_mask = (0x01 << devinfo->target_offset); 3520 } 3521 3522 static void 3523 ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3524 struct scb *scb) 3525 { 3526 role_t role; 3527 int our_id; 3528 3529 our_id = SCSIID_OUR_ID(scb->hscb->scsiid); 3530 role = ROLE_INITIATOR; 3531 if ((scb->hscb->control & TARGET_SCB) != 0) 3532 role = ROLE_TARGET; 3533 ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb), 3534 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role); 3535 } 3536 3537 /************************ Message Phase Processing ****************************/ 3538 /* 3539 * When an initiator transaction with the MK_MESSAGE flag either reconnects 3540 * or enters the initial message out phase, we are interrupted. Fill our 3541 * outgoing message buffer with the appropriate message and beging handing 3542 * the message phase(s) manually. 3543 */ 3544 static void 3545 ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3546 struct scb *scb) 3547 { 3548 /* 3549 * To facilitate adding multiple messages together, 3550 * each routine should increment the index and len 3551 * variables instead of setting them explicitly. 3552 */ 3553 ahd->msgout_index = 0; 3554 ahd->msgout_len = 0; 3555 3556 if (ahd_currently_packetized(ahd)) 3557 ahd->msg_flags |= MSG_FLAG_PACKETIZED; 3558 3559 if (ahd->send_msg_perror 3560 && ahd_inb(ahd, MSG_OUT) == HOST_MSG) { 3561 ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror; 3562 ahd->msgout_len++; 3563 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3564 #ifdef AHD_DEBUG 3565 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3566 printf("Setting up for Parity Error delivery\n"); 3567 #endif 3568 return; 3569 } else if (scb == NULL) { 3570 printf("%s: WARNING. No pending message for " 3571 "I_T msgin. Issuing NO-OP\n", ahd_name(ahd)); 3572 AHD_CORRECTABLE_ERROR(ahd); 3573 ahd->msgout_buf[ahd->msgout_index++] = MSG_NOOP; 3574 ahd->msgout_len++; 3575 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3576 return; 3577 } 3578 3579 if ((scb->flags & SCB_DEVICE_RESET) == 0 3580 && (scb->flags & SCB_PACKETIZED) == 0 3581 && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) { 3582 u_int identify_msg; 3583 3584 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb); 3585 if ((scb->hscb->control & DISCENB) != 0) 3586 identify_msg |= MSG_IDENTIFY_DISCFLAG; 3587 ahd->msgout_buf[ahd->msgout_index++] = identify_msg; 3588 ahd->msgout_len++; 3589 3590 if ((scb->hscb->control & TAG_ENB) != 0) { 3591 ahd->msgout_buf[ahd->msgout_index++] = 3592 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE); 3593 ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb); 3594 ahd->msgout_len += 2; 3595 } 3596 } 3597 3598 if (scb->flags & SCB_DEVICE_RESET) { 3599 ahd->msgout_buf[ahd->msgout_index++] = MSG_BUS_DEV_RESET; 3600 ahd->msgout_len++; 3601 ahd_print_path(ahd, scb); 3602 printf("Bus Device Reset Message Sent\n"); 3603 AHD_CORRECTABLE_ERROR(ahd); 3604 /* 3605 * Clear our selection hardware in advance of 3606 * the busfree. We may have an entry in the waiting 3607 * Q for this target, and we don't want to go about 3608 * selecting while we handle the busfree and blow it 3609 * away. 3610 */ 3611 ahd_outb(ahd, SCSISEQ0, 0); 3612 } else if ((scb->flags & SCB_ABORT) != 0) { 3613 if ((scb->hscb->control & TAG_ENB) != 0) { 3614 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT_TAG; 3615 } else { 3616 ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT; 3617 } 3618 ahd->msgout_len++; 3619 ahd_print_path(ahd, scb); 3620 printf("Abort%s Message Sent\n", 3621 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : ""); 3622 AHD_CORRECTABLE_ERROR(ahd); 3623 /* 3624 * Clear our selection hardware in advance of 3625 * the busfree. We may have an entry in the waiting 3626 * Q for this target, and we don't want to go about 3627 * selecting while we handle the busfree and blow it 3628 * away. 3629 */ 3630 ahd_outb(ahd, SCSISEQ0, 0); 3631 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) { 3632 ahd_build_transfer_msg(ahd, devinfo); 3633 /* 3634 * Clear our selection hardware in advance of potential 3635 * PPR IU status change busfree. We may have an entry in 3636 * the waiting Q for this target, and we don't want to go 3637 * about selecting while we handle the busfree and blow 3638 * it away. 3639 */ 3640 ahd_outb(ahd, SCSISEQ0, 0); 3641 } else { 3642 printf("ahd_intr: AWAITING_MSG for an SCB that " 3643 "does not have a waiting message\n"); 3644 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid, 3645 devinfo->target_mask); 3646 AHD_FATAL_ERROR(ahd); 3647 panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x " 3648 "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control, 3649 ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT), 3650 scb->flags); 3651 } 3652 3653 /* 3654 * Clear the MK_MESSAGE flag from the SCB so we aren't 3655 * asked to send this message again. 3656 */ 3657 ahd_outb(ahd, SCB_CONTROL, 3658 ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE); 3659 scb->hscb->control &= ~MK_MESSAGE; 3660 ahd->msgout_index = 0; 3661 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 3662 } 3663 3664 /* 3665 * Build an appropriate transfer negotiation message for the 3666 * currently active target. 3667 */ 3668 static void 3669 ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 3670 { 3671 /* 3672 * We need to initiate transfer negotiations. 3673 * If our current and goal settings are identical, 3674 * we want to renegotiate due to a check condition. 3675 */ 3676 struct ahd_initiator_tinfo *tinfo; 3677 struct ahd_tmode_tstate *tstate; 3678 int dowide; 3679 int dosync; 3680 int doppr; 3681 u_int period; 3682 u_int ppr_options; 3683 u_int offset; 3684 3685 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 3686 devinfo->target, &tstate); 3687 /* 3688 * Filter our period based on the current connection. 3689 * If we can't perform DT transfers on this segment (not in LVD 3690 * mode for instance), then our decision to issue a PPR message 3691 * may change. 3692 */ 3693 period = tinfo->goal.period; 3694 offset = tinfo->goal.offset; 3695 ppr_options = tinfo->goal.ppr_options; 3696 /* Target initiated PPR is not allowed in the SCSI spec */ 3697 if (devinfo->role == ROLE_TARGET) 3698 ppr_options = 0; 3699 ahd_devlimited_syncrate(ahd, tinfo, &period, 3700 &ppr_options, devinfo->role); 3701 dowide = tinfo->curr.width != tinfo->goal.width; 3702 dosync = tinfo->curr.offset != offset || tinfo->curr.period != period; 3703 /* 3704 * Only use PPR if we have options that need it, even if the device 3705 * claims to support it. There might be an expander in the way 3706 * that doesn't. 3707 */ 3708 doppr = ppr_options != 0; 3709 3710 if (!dowide && !dosync && !doppr) { 3711 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT; 3712 dosync = tinfo->goal.offset != 0; 3713 } 3714 3715 if (!dowide && !dosync && !doppr) { 3716 /* 3717 * Force async with a WDTR message if we have a wide bus, 3718 * or just issue an SDTR with a 0 offset. 3719 */ 3720 if ((ahd->features & AHD_WIDE) != 0) 3721 dowide = 1; 3722 else 3723 dosync = 1; 3724 3725 if (bootverbose) { 3726 ahd_print_devinfo(ahd, devinfo); 3727 printf("Ensuring async\n"); 3728 } 3729 } 3730 /* Target initiated PPR is not allowed in the SCSI spec */ 3731 if (devinfo->role == ROLE_TARGET) 3732 doppr = 0; 3733 3734 /* 3735 * Both the PPR message and SDTR message require the 3736 * goal syncrate to be limited to what the target device 3737 * is capable of handling (based on whether an LVD->SE 3738 * expander is on the bus), so combine these two cases. 3739 * Regardless, guarantee that if we are using WDTR and SDTR 3740 * messages that WDTR comes first. 3741 */ 3742 if (doppr || (dosync && !dowide)) { 3743 offset = tinfo->goal.offset; 3744 ahd_validate_offset(ahd, tinfo, period, &offset, 3745 doppr ? tinfo->goal.width 3746 : tinfo->curr.width, 3747 devinfo->role); 3748 if (doppr) { 3749 ahd_construct_ppr(ahd, devinfo, period, offset, 3750 tinfo->goal.width, ppr_options); 3751 } else { 3752 ahd_construct_sdtr(ahd, devinfo, period, offset); 3753 } 3754 } else { 3755 ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width); 3756 } 3757 } 3758 3759 /* 3760 * Build a synchronous negotiation message in our message 3761 * buffer based on the input parameters. 3762 */ 3763 static void 3764 ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3765 u_int period, u_int offset) 3766 { 3767 if (offset == 0) 3768 period = AHD_ASYNC_XFER_PERIOD; 3769 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3770 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR_LEN; 3771 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_SDTR; 3772 ahd->msgout_buf[ahd->msgout_index++] = period; 3773 ahd->msgout_buf[ahd->msgout_index++] = offset; 3774 ahd->msgout_len += 5; 3775 if (bootverbose) { 3776 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n", 3777 ahd_name(ahd), devinfo->channel, devinfo->target, 3778 devinfo->lun, period, offset); 3779 } 3780 } 3781 3782 /* 3783 * Build a wide negotiateion message in our message 3784 * buffer based on the input parameters. 3785 */ 3786 static void 3787 ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3788 u_int bus_width) 3789 { 3790 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3791 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR_LEN; 3792 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_WDTR; 3793 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3794 ahd->msgout_len += 4; 3795 if (bootverbose) { 3796 printf("(%s:%c:%d:%d): Sending WDTR %x\n", 3797 ahd_name(ahd), devinfo->channel, devinfo->target, 3798 devinfo->lun, bus_width); 3799 } 3800 } 3801 3802 /* 3803 * Build a parallel protocol request message in our message 3804 * buffer based on the input parameters. 3805 */ 3806 static void 3807 ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 3808 u_int period, u_int offset, u_int bus_width, 3809 u_int ppr_options) 3810 { 3811 /* 3812 * Always request precompensation from 3813 * the other target if we are running 3814 * at paced syncrates. 3815 */ 3816 if (period <= AHD_SYNCRATE_PACED) 3817 ppr_options |= MSG_EXT_PPR_PCOMP_EN; 3818 if (offset == 0) 3819 period = AHD_ASYNC_XFER_PERIOD; 3820 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXTENDED; 3821 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR_LEN; 3822 ahd->msgout_buf[ahd->msgout_index++] = MSG_EXT_PPR; 3823 ahd->msgout_buf[ahd->msgout_index++] = period; 3824 ahd->msgout_buf[ahd->msgout_index++] = 0; 3825 ahd->msgout_buf[ahd->msgout_index++] = offset; 3826 ahd->msgout_buf[ahd->msgout_index++] = bus_width; 3827 ahd->msgout_buf[ahd->msgout_index++] = ppr_options; 3828 ahd->msgout_len += 8; 3829 if (bootverbose) { 3830 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, " 3831 "offset %x, ppr_options %x\n", ahd_name(ahd), 3832 devinfo->channel, devinfo->target, devinfo->lun, 3833 bus_width, period, offset, ppr_options); 3834 } 3835 } 3836 3837 /* 3838 * Clear any active message state. 3839 */ 3840 static void 3841 ahd_clear_msg_state(struct ahd_softc *ahd) 3842 { 3843 ahd_mode_state saved_modes; 3844 3845 saved_modes = ahd_save_modes(ahd); 3846 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 3847 ahd->send_msg_perror = 0; 3848 ahd->msg_flags = MSG_FLAG_NONE; 3849 ahd->msgout_len = 0; 3850 ahd->msgin_index = 0; 3851 ahd->msg_type = MSG_TYPE_NONE; 3852 if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) { 3853 /* 3854 * The target didn't care to respond to our 3855 * message request, so clear ATN. 3856 */ 3857 ahd_outb(ahd, CLRSINT1, CLRATNO); 3858 } 3859 ahd_outb(ahd, MSG_OUT, MSG_NOOP); 3860 ahd_outb(ahd, SEQ_FLAGS2, 3861 ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING); 3862 ahd_restore_modes(ahd, saved_modes); 3863 } 3864 3865 /* 3866 * Manual message loop handler. 3867 */ 3868 static void 3869 ahd_handle_message_phase(struct ahd_softc *ahd) 3870 { 3871 struct ahd_devinfo devinfo; 3872 u_int bus_phase; 3873 int end_session; 3874 3875 ahd_fetch_devinfo(ahd, &devinfo); 3876 end_session = FALSE; 3877 bus_phase = ahd_inb(ahd, LASTPHASE); 3878 3879 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) { 3880 printf("LQIRETRY for LQIPHASE_OUTPKT\n"); 3881 ahd_outb(ahd, LQCTL2, LQIRETRY); 3882 } 3883 reswitch: 3884 switch (ahd->msg_type) { 3885 case MSG_TYPE_INITIATOR_MSGOUT: 3886 { 3887 int lastbyte; 3888 int phasemis; 3889 int msgdone; 3890 3891 if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0) 3892 panic("HOST_MSG_LOOP interrupt with no active message"); 3893 3894 #ifdef AHD_DEBUG 3895 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3896 ahd_print_devinfo(ahd, &devinfo); 3897 printf("INITIATOR_MSG_OUT"); 3898 } 3899 #endif 3900 phasemis = bus_phase != P_MESGOUT; 3901 if (phasemis) { 3902 #ifdef AHD_DEBUG 3903 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3904 printf(" PHASEMIS %s\n", 3905 ahd_lookup_phase_entry(bus_phase) 3906 ->phasemsg); 3907 } 3908 #endif 3909 if (bus_phase == P_MESGIN) { 3910 /* 3911 * Change gears and see if 3912 * this messages is of interest to 3913 * us or should be passed back to 3914 * the sequencer. 3915 */ 3916 ahd_outb(ahd, CLRSINT1, CLRATNO); 3917 ahd->send_msg_perror = 0; 3918 ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN; 3919 ahd->msgin_index = 0; 3920 goto reswitch; 3921 } 3922 end_session = TRUE; 3923 break; 3924 } 3925 3926 if (ahd->send_msg_perror) { 3927 ahd_outb(ahd, CLRSINT1, CLRATNO); 3928 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3929 #ifdef AHD_DEBUG 3930 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3931 printf(" byte 0x%x\n", ahd->send_msg_perror); 3932 #endif 3933 /* 3934 * If we are notifying the target of a CRC error 3935 * during packetized operations, the target is 3936 * within its rights to acknowledge our message 3937 * with a busfree. 3938 */ 3939 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0 3940 && ahd->send_msg_perror == MSG_INITIATOR_DET_ERR) 3941 ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE; 3942 3943 ahd_outb(ahd, RETURN_2, ahd->send_msg_perror); 3944 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 3945 break; 3946 } 3947 3948 msgdone = ahd->msgout_index == ahd->msgout_len; 3949 if (msgdone) { 3950 /* 3951 * The target has requested a retry. 3952 * Re-assert ATN, reset our message index to 3953 * 0, and try again. 3954 */ 3955 ahd->msgout_index = 0; 3956 ahd_assert_atn(ahd); 3957 } 3958 3959 lastbyte = ahd->msgout_index == (ahd->msgout_len - 1); 3960 if (lastbyte) { 3961 /* Last byte is signified by dropping ATN */ 3962 ahd_outb(ahd, CLRSINT1, CLRATNO); 3963 } 3964 3965 /* 3966 * Clear our interrupt status and present 3967 * the next byte on the bus. 3968 */ 3969 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 3970 #ifdef AHD_DEBUG 3971 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 3972 printf(" byte 0x%x\n", 3973 ahd->msgout_buf[ahd->msgout_index]); 3974 #endif 3975 ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]); 3976 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE); 3977 break; 3978 } 3979 case MSG_TYPE_INITIATOR_MSGIN: 3980 { 3981 int phasemis; 3982 int message_done; 3983 3984 #ifdef AHD_DEBUG 3985 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3986 ahd_print_devinfo(ahd, &devinfo); 3987 printf("INITIATOR_MSG_IN"); 3988 } 3989 #endif 3990 phasemis = bus_phase != P_MESGIN; 3991 if (phasemis) { 3992 #ifdef AHD_DEBUG 3993 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 3994 printf(" PHASEMIS %s\n", 3995 ahd_lookup_phase_entry(bus_phase) 3996 ->phasemsg); 3997 } 3998 #endif 3999 ahd->msgin_index = 0; 4000 if (bus_phase == P_MESGOUT 4001 && (ahd->send_msg_perror != 0 4002 || (ahd->msgout_len != 0 4003 && ahd->msgout_index == 0))) { 4004 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 4005 goto reswitch; 4006 } 4007 end_session = TRUE; 4008 break; 4009 } 4010 4011 /* Pull the byte in without acking it */ 4012 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS); 4013 #ifdef AHD_DEBUG 4014 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4015 printf(" byte 0x%x\n", 4016 ahd->msgin_buf[ahd->msgin_index]); 4017 #endif 4018 4019 message_done = ahd_parse_msg(ahd, &devinfo); 4020 4021 if (message_done) { 4022 /* 4023 * Clear our incoming message buffer in case there 4024 * is another message following this one. 4025 */ 4026 ahd->msgin_index = 0; 4027 4028 /* 4029 * If this message illicited a response, 4030 * assert ATN so the target takes us to the 4031 * message out phase. 4032 */ 4033 if (ahd->msgout_len != 0) { 4034 #ifdef AHD_DEBUG 4035 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) { 4036 ahd_print_devinfo(ahd, &devinfo); 4037 printf("Asserting ATN for response\n"); 4038 } 4039 #endif 4040 ahd_assert_atn(ahd); 4041 } 4042 } else 4043 ahd->msgin_index++; 4044 4045 if (message_done == MSGLOOP_TERMINATED) { 4046 end_session = TRUE; 4047 } else { 4048 /* Ack the byte */ 4049 ahd_outb(ahd, CLRSINT1, CLRREQINIT); 4050 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ); 4051 } 4052 break; 4053 } 4054 case MSG_TYPE_TARGET_MSGIN: 4055 { 4056 int msgdone; 4057 int msgout_request; 4058 4059 /* 4060 * By default, the message loop will continue. 4061 */ 4062 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4063 4064 if (ahd->msgout_len == 0) 4065 panic("Target MSGIN with no active message"); 4066 4067 /* 4068 * If we interrupted a mesgout session, the initiator 4069 * will not know this until our first REQ. So, we 4070 * only honor mesgout requests after we've sent our 4071 * first byte. 4072 */ 4073 if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0 4074 && ahd->msgout_index > 0) 4075 msgout_request = TRUE; 4076 else 4077 msgout_request = FALSE; 4078 4079 if (msgout_request) { 4080 /* 4081 * Change gears and see if 4082 * this messages is of interest to 4083 * us or should be passed back to 4084 * the sequencer. 4085 */ 4086 ahd->msg_type = MSG_TYPE_TARGET_MSGOUT; 4087 ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO); 4088 ahd->msgin_index = 0; 4089 /* Dummy read to REQ for first byte */ 4090 ahd_inb(ahd, SCSIDAT); 4091 ahd_outb(ahd, SXFRCTL0, 4092 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4093 break; 4094 } 4095 4096 msgdone = ahd->msgout_index == ahd->msgout_len; 4097 if (msgdone) { 4098 ahd_outb(ahd, SXFRCTL0, 4099 ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4100 end_session = TRUE; 4101 break; 4102 } 4103 4104 /* 4105 * Present the next byte on the bus. 4106 */ 4107 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4108 ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]); 4109 break; 4110 } 4111 case MSG_TYPE_TARGET_MSGOUT: 4112 { 4113 int lastbyte; 4114 int msgdone; 4115 4116 /* 4117 * By default, the message loop will continue. 4118 */ 4119 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG); 4120 4121 /* 4122 * The initiator signals that this is 4123 * the last byte by dropping ATN. 4124 */ 4125 lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0; 4126 4127 /* 4128 * Read the latched byte, but turn off SPIOEN first 4129 * so that we don't inadvertently cause a REQ for the 4130 * next byte. 4131 */ 4132 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN); 4133 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT); 4134 msgdone = ahd_parse_msg(ahd, &devinfo); 4135 if (msgdone == MSGLOOP_TERMINATED) { 4136 /* 4137 * The message is *really* done in that it caused 4138 * us to go to bus free. The sequencer has already 4139 * been reset at this point, so pull the ejection 4140 * handle. 4141 */ 4142 return; 4143 } 4144 4145 ahd->msgin_index++; 4146 4147 /* 4148 * XXX Read spec about initiator dropping ATN too soon 4149 * and use msgdone to detect it. 4150 */ 4151 if (msgdone == MSGLOOP_MSGCOMPLETE) { 4152 ahd->msgin_index = 0; 4153 4154 /* 4155 * If this message illicited a response, transition 4156 * to the Message in phase and send it. 4157 */ 4158 if (ahd->msgout_len != 0) { 4159 ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO); 4160 ahd_outb(ahd, SXFRCTL0, 4161 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4162 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 4163 ahd->msgin_index = 0; 4164 break; 4165 } 4166 } 4167 4168 if (lastbyte) 4169 end_session = TRUE; 4170 else { 4171 /* Ask for the next byte. */ 4172 ahd_outb(ahd, SXFRCTL0, 4173 ahd_inb(ahd, SXFRCTL0) | SPIOEN); 4174 } 4175 4176 break; 4177 } 4178 default: 4179 panic("Unknown REQINIT message type"); 4180 } 4181 4182 if (end_session) { 4183 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) { 4184 printf("%s: Returning to Idle Loop\n", 4185 ahd_name(ahd)); 4186 ahd_clear_msg_state(ahd); 4187 4188 /* 4189 * Perform the equivalent of a clear_target_state. 4190 */ 4191 ahd_outb(ahd, LASTPHASE, P_BUSFREE); 4192 ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT); 4193 ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET); 4194 } else { 4195 ahd_clear_msg_state(ahd); 4196 ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP); 4197 } 4198 } 4199 } 4200 4201 /* 4202 * See if we sent a particular extended message to the target. 4203 * If "full" is true, return true only if the target saw the full 4204 * message. If "full" is false, return true if the target saw at 4205 * least the first byte of the message. 4206 */ 4207 static int 4208 ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full) 4209 { 4210 int found; 4211 u_int index; 4212 4213 found = FALSE; 4214 index = 0; 4215 4216 while (index < ahd->msgout_len) { 4217 if (ahd->msgout_buf[index] == MSG_EXTENDED) { 4218 u_int end_index; 4219 4220 end_index = index + 1 + ahd->msgout_buf[index + 1]; 4221 if (ahd->msgout_buf[index+2] == msgval 4222 && type == AHDMSG_EXT) { 4223 if (full) { 4224 if (ahd->msgout_index > end_index) 4225 found = TRUE; 4226 } else if (ahd->msgout_index > index) 4227 found = TRUE; 4228 } 4229 index = end_index; 4230 } else if (ahd->msgout_buf[index] >= MSG_SIMPLE_TASK 4231 && ahd->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) { 4232 /* Skip tag type and tag id or residue param*/ 4233 index += 2; 4234 } else { 4235 /* Single byte message */ 4236 if (type == AHDMSG_1B 4237 && ahd->msgout_index > index 4238 && (ahd->msgout_buf[index] == msgval 4239 || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0 4240 && msgval == MSG_IDENTIFYFLAG))) 4241 found = TRUE; 4242 index++; 4243 } 4244 4245 if (found) 4246 break; 4247 } 4248 return (found); 4249 } 4250 4251 /* 4252 * Wait for a complete incoming message, parse it, and respond accordingly. 4253 */ 4254 static int 4255 ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4256 { 4257 struct ahd_initiator_tinfo *tinfo; 4258 struct ahd_tmode_tstate *tstate; 4259 int reject; 4260 int done; 4261 int response; 4262 4263 done = MSGLOOP_IN_PROG; 4264 response = FALSE; 4265 reject = FALSE; 4266 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid, 4267 devinfo->target, &tstate); 4268 4269 /* 4270 * Parse as much of the message as is available, 4271 * rejecting it if we don't support it. When 4272 * the entire message is available and has been 4273 * handled, return MSGLOOP_MSGCOMPLETE, indicating 4274 * that we have parsed an entire message. 4275 * 4276 * In the case of extended messages, we accept the length 4277 * byte outright and perform more checking once we know the 4278 * extended message type. 4279 */ 4280 switch (ahd->msgin_buf[0]) { 4281 case MSG_DISCONNECT: 4282 case MSG_SAVEDATAPOINTER: 4283 case MSG_CMDCOMPLETE: 4284 case MSG_RESTOREPOINTERS: 4285 case MSG_IGN_WIDE_RESIDUE: 4286 /* 4287 * End our message loop as these are messages 4288 * the sequencer handles on its own. 4289 */ 4290 done = MSGLOOP_TERMINATED; 4291 break; 4292 case MSG_MESSAGE_REJECT: 4293 response = ahd_handle_msg_reject(ahd, devinfo); 4294 /* FALLTHROUGH */ 4295 case MSG_NOOP: 4296 done = MSGLOOP_MSGCOMPLETE; 4297 break; 4298 case MSG_EXTENDED: 4299 { 4300 /* Wait for enough of the message to begin validation */ 4301 if (ahd->msgin_index < 2) 4302 break; 4303 switch (ahd->msgin_buf[2]) { 4304 case MSG_EXT_SDTR: 4305 { 4306 u_int period; 4307 u_int ppr_options; 4308 u_int offset; 4309 u_int saved_offset; 4310 4311 if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) { 4312 reject = TRUE; 4313 break; 4314 } 4315 4316 /* 4317 * Wait until we have both args before validating 4318 * and acting on this message. 4319 * 4320 * Add one to MSG_EXT_SDTR_LEN to account for 4321 * the extended message preamble. 4322 */ 4323 if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1)) 4324 break; 4325 4326 period = ahd->msgin_buf[3]; 4327 ppr_options = 0; 4328 saved_offset = offset = ahd->msgin_buf[4]; 4329 ahd_devlimited_syncrate(ahd, tinfo, &period, 4330 &ppr_options, devinfo->role); 4331 ahd_validate_offset(ahd, tinfo, period, &offset, 4332 tinfo->curr.width, devinfo->role); 4333 if (bootverbose) { 4334 printf("(%s:%c:%d:%d): Received " 4335 "SDTR period %x, offset %x\n\t" 4336 "Filtered to period %x, offset %x\n", 4337 ahd_name(ahd), devinfo->channel, 4338 devinfo->target, devinfo->lun, 4339 ahd->msgin_buf[3], saved_offset, 4340 period, offset); 4341 } 4342 ahd_set_syncrate(ahd, devinfo, period, 4343 offset, ppr_options, 4344 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4345 /*paused*/TRUE); 4346 4347 /* 4348 * See if we initiated Sync Negotiation 4349 * and didn't have to fall down to async 4350 * transfers. 4351 */ 4352 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, TRUE)) { 4353 /* We started it */ 4354 if (saved_offset != offset) { 4355 /* Went too low - force async */ 4356 reject = TRUE; 4357 } 4358 } else { 4359 /* 4360 * Send our own SDTR in reply 4361 */ 4362 if (bootverbose 4363 && devinfo->role == ROLE_INITIATOR) { 4364 printf("(%s:%c:%d:%d): Target " 4365 "Initiated SDTR\n", 4366 ahd_name(ahd), devinfo->channel, 4367 devinfo->target, devinfo->lun); 4368 } 4369 ahd->msgout_index = 0; 4370 ahd->msgout_len = 0; 4371 ahd_construct_sdtr(ahd, devinfo, 4372 period, offset); 4373 ahd->msgout_index = 0; 4374 response = TRUE; 4375 } 4376 done = MSGLOOP_MSGCOMPLETE; 4377 break; 4378 } 4379 case MSG_EXT_WDTR: 4380 { 4381 u_int bus_width; 4382 u_int saved_width; 4383 u_int sending_reply; 4384 4385 sending_reply = FALSE; 4386 if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) { 4387 reject = TRUE; 4388 break; 4389 } 4390 4391 /* 4392 * Wait until we have our arg before validating 4393 * and acting on this message. 4394 * 4395 * Add one to MSG_EXT_WDTR_LEN to account for 4396 * the extended message preamble. 4397 */ 4398 if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1)) 4399 break; 4400 4401 bus_width = ahd->msgin_buf[3]; 4402 saved_width = bus_width; 4403 ahd_validate_width(ahd, tinfo, &bus_width, 4404 devinfo->role); 4405 if (bootverbose) { 4406 printf("(%s:%c:%d:%d): Received WDTR " 4407 "%x filtered to %x\n", 4408 ahd_name(ahd), devinfo->channel, 4409 devinfo->target, devinfo->lun, 4410 saved_width, bus_width); 4411 } 4412 4413 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, TRUE)) { 4414 /* 4415 * Don't send a WDTR back to the 4416 * target, since we asked first. 4417 * If the width went higher than our 4418 * request, reject it. 4419 */ 4420 if (saved_width > bus_width) { 4421 reject = TRUE; 4422 printf("(%s:%c:%d:%d): requested %dBit " 4423 "transfers. Rejecting...\n", 4424 ahd_name(ahd), devinfo->channel, 4425 devinfo->target, devinfo->lun, 4426 8 * (0x01 << bus_width)); 4427 bus_width = 0; 4428 } 4429 } else { 4430 /* 4431 * Send our own WDTR in reply 4432 */ 4433 if (bootverbose 4434 && devinfo->role == ROLE_INITIATOR) { 4435 printf("(%s:%c:%d:%d): Target " 4436 "Initiated WDTR\n", 4437 ahd_name(ahd), devinfo->channel, 4438 devinfo->target, devinfo->lun); 4439 } 4440 ahd->msgout_index = 0; 4441 ahd->msgout_len = 0; 4442 ahd_construct_wdtr(ahd, devinfo, bus_width); 4443 ahd->msgout_index = 0; 4444 response = TRUE; 4445 sending_reply = TRUE; 4446 } 4447 /* 4448 * After a wide message, we are async, but 4449 * some devices don't seem to honor this portion 4450 * of the spec. Force a renegotiation of the 4451 * sync component of our transfer agreement even 4452 * if our goal is async. By updating our width 4453 * after forcing the negotiation, we avoid 4454 * renegotiating for width. 4455 */ 4456 ahd_update_neg_request(ahd, devinfo, tstate, 4457 tinfo, AHD_NEG_ALWAYS); 4458 ahd_set_width(ahd, devinfo, bus_width, 4459 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4460 /*paused*/TRUE); 4461 if (sending_reply == FALSE && reject == FALSE) { 4462 /* 4463 * We will always have an SDTR to send. 4464 */ 4465 ahd->msgout_index = 0; 4466 ahd->msgout_len = 0; 4467 ahd_build_transfer_msg(ahd, devinfo); 4468 ahd->msgout_index = 0; 4469 response = TRUE; 4470 } 4471 done = MSGLOOP_MSGCOMPLETE; 4472 break; 4473 } 4474 case MSG_EXT_PPR: 4475 { 4476 u_int period; 4477 u_int offset; 4478 u_int bus_width; 4479 u_int ppr_options; 4480 u_int saved_width; 4481 u_int saved_offset; 4482 u_int saved_ppr_options; 4483 4484 if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) { 4485 reject = TRUE; 4486 break; 4487 } 4488 4489 /* 4490 * Wait until we have all args before validating 4491 * and acting on this message. 4492 * 4493 * Add one to MSG_EXT_PPR_LEN to account for 4494 * the extended message preamble. 4495 */ 4496 if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1)) 4497 break; 4498 4499 period = ahd->msgin_buf[3]; 4500 offset = ahd->msgin_buf[5]; 4501 bus_width = ahd->msgin_buf[6]; 4502 saved_width = bus_width; 4503 ppr_options = ahd->msgin_buf[7]; 4504 /* 4505 * According to the spec, a DT only 4506 * period factor with no DT option 4507 * set implies async. 4508 */ 4509 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0 4510 && period <= 9) 4511 offset = 0; 4512 saved_ppr_options = ppr_options; 4513 saved_offset = offset; 4514 4515 /* 4516 * Transfer options are only available if we 4517 * are negotiating wide. 4518 */ 4519 if (bus_width == 0) 4520 ppr_options &= MSG_EXT_PPR_QAS_REQ; 4521 4522 ahd_validate_width(ahd, tinfo, &bus_width, 4523 devinfo->role); 4524 ahd_devlimited_syncrate(ahd, tinfo, &period, 4525 &ppr_options, devinfo->role); 4526 ahd_validate_offset(ahd, tinfo, period, &offset, 4527 bus_width, devinfo->role); 4528 4529 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, TRUE)) { 4530 /* 4531 * If we are unable to do any of the 4532 * requested options (we went too low), 4533 * then we'll have to reject the message. 4534 */ 4535 if (saved_width > bus_width 4536 || saved_offset != offset 4537 || saved_ppr_options != ppr_options) { 4538 reject = TRUE; 4539 period = 0; 4540 offset = 0; 4541 bus_width = 0; 4542 ppr_options = 0; 4543 } 4544 } else { 4545 if (devinfo->role != ROLE_TARGET) 4546 printf("(%s:%c:%d:%d): Target " 4547 "Initiated PPR\n", 4548 ahd_name(ahd), devinfo->channel, 4549 devinfo->target, devinfo->lun); 4550 else 4551 printf("(%s:%c:%d:%d): Initiator " 4552 "Initiated PPR\n", 4553 ahd_name(ahd), devinfo->channel, 4554 devinfo->target, devinfo->lun); 4555 ahd->msgout_index = 0; 4556 ahd->msgout_len = 0; 4557 ahd_construct_ppr(ahd, devinfo, period, offset, 4558 bus_width, ppr_options); 4559 ahd->msgout_index = 0; 4560 response = TRUE; 4561 } 4562 if (bootverbose) { 4563 printf("(%s:%c:%d:%d): Received PPR width %x, " 4564 "period %x, offset %x,options %x\n" 4565 "\tFiltered to width %x, period %x, " 4566 "offset %x, options %x\n", 4567 ahd_name(ahd), devinfo->channel, 4568 devinfo->target, devinfo->lun, 4569 saved_width, ahd->msgin_buf[3], 4570 saved_offset, saved_ppr_options, 4571 bus_width, period, offset, ppr_options); 4572 } 4573 ahd_set_width(ahd, devinfo, bus_width, 4574 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4575 /*paused*/TRUE); 4576 ahd_set_syncrate(ahd, devinfo, period, 4577 offset, ppr_options, 4578 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4579 /*paused*/TRUE); 4580 4581 done = MSGLOOP_MSGCOMPLETE; 4582 break; 4583 } 4584 default: 4585 /* Unknown extended message. Reject it. */ 4586 reject = TRUE; 4587 break; 4588 } 4589 break; 4590 } 4591 #ifdef AHD_TARGET_MODE 4592 case MSG_BUS_DEV_RESET: 4593 ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD, 4594 CAM_BDR_SENT, 4595 "Bus Device Reset Received", 4596 /*verbose_level*/0); 4597 ahd_restart(ahd); 4598 done = MSGLOOP_TERMINATED; 4599 break; 4600 case MSG_ABORT_TAG: 4601 case MSG_ABORT: 4602 case MSG_CLEAR_QUEUE: 4603 { 4604 int tag; 4605 4606 /* Target mode messages */ 4607 if (devinfo->role != ROLE_TARGET) { 4608 reject = TRUE; 4609 break; 4610 } 4611 tag = SCB_LIST_NULL; 4612 if (ahd->msgin_buf[0] == MSG_ABORT_TAG) 4613 tag = ahd_inb(ahd, INITIATOR_TAG); 4614 ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 4615 devinfo->lun, tag, ROLE_TARGET, 4616 CAM_REQ_ABORTED); 4617 4618 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 4619 if (tstate != NULL) { 4620 struct ahd_tmode_lstate* lstate; 4621 4622 lstate = tstate->enabled_luns[devinfo->lun]; 4623 if (lstate != NULL) { 4624 ahd_queue_lstate_event(ahd, lstate, 4625 devinfo->our_scsiid, 4626 ahd->msgin_buf[0], 4627 /*arg*/tag); 4628 ahd_send_lstate_events(ahd, lstate); 4629 } 4630 } 4631 ahd_restart(ahd); 4632 done = MSGLOOP_TERMINATED; 4633 break; 4634 } 4635 #endif 4636 case MSG_QAS_REQUEST: 4637 #ifdef AHD_DEBUG 4638 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) 4639 printf("%s: QAS request. SCSISIGI == 0x%x\n", 4640 ahd_name(ahd), ahd_inb(ahd, SCSISIGI)); 4641 #endif 4642 ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE; 4643 /* FALLTHROUGH */ 4644 case MSG_TERM_IO_PROC: 4645 default: 4646 reject = TRUE; 4647 break; 4648 } 4649 4650 if (reject) { 4651 /* 4652 * Setup to reject the message. 4653 */ 4654 ahd->msgout_index = 0; 4655 ahd->msgout_len = 1; 4656 ahd->msgout_buf[0] = MSG_MESSAGE_REJECT; 4657 done = MSGLOOP_MSGCOMPLETE; 4658 response = TRUE; 4659 } 4660 4661 if (done != MSGLOOP_IN_PROG && !response) 4662 /* Clear the outgoing message buffer */ 4663 ahd->msgout_len = 0; 4664 4665 return (done); 4666 } 4667 4668 /* 4669 * Process a message reject message. 4670 */ 4671 static int 4672 ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4673 { 4674 /* 4675 * What we care about here is if we had an 4676 * outstanding SDTR or WDTR message for this 4677 * target. If we did, this is a signal that 4678 * the target is refusing negotiation. 4679 */ 4680 struct scb *scb; 4681 struct ahd_initiator_tinfo *tinfo; 4682 struct ahd_tmode_tstate *tstate; 4683 u_int scb_index; 4684 u_int last_msg; 4685 int response = 0; 4686 4687 scb_index = ahd_get_scbptr(ahd); 4688 scb = ahd_lookup_scb(ahd, scb_index); 4689 tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, 4690 devinfo->our_scsiid, 4691 devinfo->target, &tstate); 4692 /* Might be necessary */ 4693 last_msg = ahd_inb(ahd, LAST_MSG); 4694 4695 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) { 4696 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/TRUE) 4697 && tinfo->goal.period <= AHD_SYNCRATE_PACED) { 4698 /* 4699 * Target may not like our SPI-4 PPR Options. 4700 * Attempt to negotiate 80MHz which will turn 4701 * off these options. 4702 */ 4703 if (bootverbose) { 4704 printf("(%s:%c:%d:%d): PPR Rejected. " 4705 "Trying simple U160 PPR\n", 4706 ahd_name(ahd), devinfo->channel, 4707 devinfo->target, devinfo->lun); 4708 } 4709 tinfo->goal.period = AHD_SYNCRATE_DT; 4710 tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ 4711 | MSG_EXT_PPR_QAS_REQ 4712 | MSG_EXT_PPR_DT_REQ; 4713 } else { 4714 /* 4715 * Target does not support the PPR message. 4716 * Attempt to negotiate SPI-2 style. 4717 */ 4718 if (bootverbose) { 4719 printf("(%s:%c:%d:%d): PPR Rejected. " 4720 "Trying WDTR/SDTR\n", 4721 ahd_name(ahd), devinfo->channel, 4722 devinfo->target, devinfo->lun); 4723 } 4724 tinfo->goal.ppr_options = 0; 4725 tinfo->curr.transport_version = 2; 4726 tinfo->goal.transport_version = 2; 4727 } 4728 ahd->msgout_index = 0; 4729 ahd->msgout_len = 0; 4730 ahd_build_transfer_msg(ahd, devinfo); 4731 ahd->msgout_index = 0; 4732 response = 1; 4733 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) { 4734 /* note 8bit xfers */ 4735 printf("(%s:%c:%d:%d): refuses WIDE negotiation. Using " 4736 "8bit transfers\n", ahd_name(ahd), 4737 devinfo->channel, devinfo->target, devinfo->lun); 4738 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 4739 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4740 /*paused*/TRUE); 4741 /* 4742 * No need to clear the sync rate. If the target 4743 * did not accept the command, our syncrate is 4744 * unaffected. If the target started the negotiation, 4745 * but rejected our response, we already cleared the 4746 * sync rate before sending our WDTR. 4747 */ 4748 if (tinfo->goal.offset != tinfo->curr.offset) { 4749 /* Start the sync negotiation */ 4750 ahd->msgout_index = 0; 4751 ahd->msgout_len = 0; 4752 ahd_build_transfer_msg(ahd, devinfo); 4753 ahd->msgout_index = 0; 4754 response = 1; 4755 } 4756 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) { 4757 /* note asynch xfers and clear flag */ 4758 ahd_set_syncrate(ahd, devinfo, /*period*/0, 4759 /*offset*/0, /*ppr_options*/0, 4760 AHD_TRANS_ACTIVE|AHD_TRANS_GOAL, 4761 /*paused*/TRUE); 4762 printf("(%s:%c:%d:%d): refuses synchronous negotiation. " 4763 "Using asynchronous transfers\n", 4764 ahd_name(ahd), devinfo->channel, 4765 devinfo->target, devinfo->lun); 4766 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) { 4767 int tag_type; 4768 int mask; 4769 4770 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK); 4771 4772 if (tag_type == MSG_SIMPLE_TASK) { 4773 printf("(%s:%c:%d:%d): refuses tagged commands. " 4774 "Performing non-tagged I/O\n", ahd_name(ahd), 4775 devinfo->channel, devinfo->target, devinfo->lun); 4776 ahd_set_tags(ahd, devinfo, AHD_QUEUE_NONE); 4777 mask = ~0x23; 4778 } else { 4779 printf("(%s:%c:%d:%d): refuses %s tagged commands. " 4780 "Performing simple queue tagged I/O only\n", 4781 ahd_name(ahd), devinfo->channel, devinfo->target, 4782 devinfo->lun, tag_type == MSG_ORDERED_TASK 4783 ? "ordered" : "head of queue"); 4784 ahd_set_tags(ahd, devinfo, AHD_QUEUE_BASIC); 4785 mask = ~0x03; 4786 } 4787 4788 /* 4789 * Resend the identify for this CCB as the target 4790 * may believe that the selection is invalid otherwise. 4791 */ 4792 ahd_outb(ahd, SCB_CONTROL, 4793 ahd_inb_scbram(ahd, SCB_CONTROL) & mask); 4794 scb->hscb->control &= mask; 4795 aic_set_transaction_tag(scb, /*enabled*/FALSE, 4796 /*type*/MSG_SIMPLE_TASK); 4797 ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG); 4798 ahd_assert_atn(ahd); 4799 ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun), 4800 SCB_GET_TAG(scb)); 4801 4802 /* 4803 * Requeue all tagged commands for this target 4804 * currently in our possession so they can be 4805 * converted to untagged commands. 4806 */ 4807 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb), 4808 SCB_GET_CHANNEL(ahd, scb), 4809 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL, 4810 ROLE_INITIATOR, CAM_REQUEUE_REQ, 4811 SEARCH_COMPLETE); 4812 } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) { 4813 /* 4814 * Most likely the device believes that we had 4815 * previously negotiated packetized. 4816 */ 4817 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE 4818 | MSG_FLAG_IU_REQ_CHANGED; 4819 4820 ahd_force_renegotiation(ahd, devinfo); 4821 ahd->msgout_index = 0; 4822 ahd->msgout_len = 0; 4823 ahd_build_transfer_msg(ahd, devinfo); 4824 ahd->msgout_index = 0; 4825 response = 1; 4826 } else { 4827 /* 4828 * Otherwise, we ignore it. 4829 */ 4830 printf("%s:%c:%d: Message reject for %x -- ignored\n", 4831 ahd_name(ahd), devinfo->channel, devinfo->target, 4832 last_msg); 4833 } 4834 return (response); 4835 } 4836 4837 /* 4838 * Process an ignore wide residue message. 4839 */ 4840 static void 4841 ahd_handle_ign_wide_residue(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) 4842 { 4843 u_int scb_index; 4844 struct scb *scb; 4845 4846 scb_index = ahd_get_scbptr(ahd); 4847 scb = ahd_lookup_scb(ahd, scb_index); 4848 /* 4849 * XXX Actually check data direction in the sequencer? 4850 * Perhaps add datadir to some spare bits in the hscb? 4851 */ 4852 if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0 4853 || aic_get_transfer_dir(scb) != CAM_DIR_IN) { 4854 /* 4855 * Ignore the message if we haven't 4856 * seen an appropriate data phase yet. 4857 */ 4858 } else { 4859 /* 4860 * If the residual occurred on the last 4861 * transfer and the transfer request was 4862 * expected to end on an odd count, do 4863 * nothing. Otherwise, subtract a byte 4864 * and update the residual count accordingly. 4865 */ 4866 uint32_t sgptr; 4867 4868 sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR); 4869 if ((sgptr & SG_LIST_NULL) != 0 4870 && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 4871 & SCB_XFERLEN_ODD) != 0) { 4872 /* 4873 * If the residual occurred on the last 4874 * transfer and the transfer request was 4875 * expected to end on an odd count, do 4876 * nothing. 4877 */ 4878 } else { 4879 uint32_t data_cnt; 4880 uint32_t sglen; 4881 4882 /* Pull in the rest of the sgptr */ 4883 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 4884 data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT); 4885 if ((sgptr & SG_LIST_NULL) != 0) { 4886 /* 4887 * The residual data count is not updated 4888 * for the command run to completion case. 4889 * Explicitly zero the count. 4890 */ 4891 data_cnt &= ~AHD_SG_LEN_MASK; 4892 } 4893 data_cnt += 1; 4894 sgptr &= SG_PTR_MASK; 4895 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 4896 struct ahd_dma64_seg *sg; 4897 4898 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4899 4900 /* 4901 * The residual sg ptr points to the next S/G 4902 * to load so we must go back one. 4903 */ 4904 sg--; 4905 sglen = aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 4906 if (sg != scb->sg_list 4907 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4908 sg--; 4909 sglen = aic_le32toh(sg->len); 4910 /* 4911 * Preserve High Address and SG_LIST 4912 * bits while setting the count to 1. 4913 */ 4914 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4915 4916 /* 4917 * Increment sg so it points to the 4918 * "next" sg. 4919 */ 4920 sg++; 4921 sgptr = ahd_sg_virt_to_bus(ahd, scb, 4922 sg); 4923 } 4924 } else { 4925 struct ahd_dma_seg *sg; 4926 4927 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 4928 4929 /* 4930 * The residual sg ptr points to the next S/G 4931 * to load so we must go back one. 4932 */ 4933 sg--; 4934 sglen = aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 4935 if (sg != scb->sg_list 4936 && sglen < (data_cnt & AHD_SG_LEN_MASK)) { 4937 sg--; 4938 sglen = aic_le32toh(sg->len); 4939 /* 4940 * Preserve High Address and SG_LIST 4941 * bits while setting the count to 1. 4942 */ 4943 data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK)); 4944 4945 /* 4946 * Increment sg so it points to the 4947 * "next" sg. 4948 */ 4949 sg++; 4950 sgptr = ahd_sg_virt_to_bus(ahd, scb, 4951 sg); 4952 } 4953 } 4954 /* 4955 * Toggle the "oddness" of the transfer length 4956 * to handle this mid-transfer ignore wide 4957 * residue. This ensures that the oddness is 4958 * correct for subsequent data transfers. 4959 */ 4960 ahd_outb(ahd, SCB_TASK_ATTRIBUTE, 4961 ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE) 4962 ^ SCB_XFERLEN_ODD); 4963 4964 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr); 4965 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt); 4966 /* 4967 * The FIFO's pointers will be updated if/when the 4968 * sequencer re-enters a data phase. 4969 */ 4970 } 4971 } 4972 } 4973 4974 /* 4975 * Reinitialize the data pointers for the active transfer 4976 * based on its current residual. 4977 */ 4978 static void 4979 ahd_reinitialize_dataptrs(struct ahd_softc *ahd) 4980 { 4981 struct scb *scb; 4982 ahd_mode_state saved_modes; 4983 u_int scb_index; 4984 u_int wait; 4985 uint32_t sgptr; 4986 uint32_t resid; 4987 uint64_t dataptr; 4988 4989 AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK, 4990 AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK); 4991 4992 scb_index = ahd_get_scbptr(ahd); 4993 scb = ahd_lookup_scb(ahd, scb_index); 4994 4995 /* 4996 * Release and reacquire the FIFO so we 4997 * have a clean slate. 4998 */ 4999 ahd_outb(ahd, DFFSXFRCTL, CLRCHN); 5000 wait = 1000; 5001 while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE)) 5002 aic_delay(100); 5003 if (wait == 0) { 5004 ahd_print_path(ahd, scb); 5005 printf("ahd_reinitialize_dataptrs: Forcing FIFO free.\n"); 5006 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT); 5007 } 5008 saved_modes = ahd_save_modes(ahd); 5009 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5010 ahd_outb(ahd, DFFSTAT, 5011 ahd_inb(ahd, DFFSTAT) 5012 | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0)); 5013 5014 /* 5015 * Determine initial values for data_addr and data_cnt 5016 * for resuming the data phase. 5017 */ 5018 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR); 5019 sgptr &= SG_PTR_MASK; 5020 5021 resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16) 5022 | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8) 5023 | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT); 5024 5025 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) { 5026 struct ahd_dma64_seg *sg; 5027 5028 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5029 5030 /* The residual sg_ptr always points to the next sg */ 5031 sg--; 5032 5033 dataptr = aic_le64toh(sg->addr) 5034 + (aic_le32toh(sg->len) & AHD_SG_LEN_MASK) 5035 - resid; 5036 ahd_outl(ahd, HADDR + 4, dataptr >> 32); 5037 } else { 5038 struct ahd_dma_seg *sg; 5039 5040 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr); 5041 5042 /* The residual sg_ptr always points to the next sg */ 5043 sg--; 5044 5045 dataptr = aic_le32toh(sg->addr) 5046 + (aic_le32toh(sg->len) & AHD_SG_LEN_MASK) 5047 - resid; 5048 ahd_outb(ahd, HADDR + 4, 5049 (aic_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24); 5050 } 5051 ahd_outl(ahd, HADDR, dataptr); 5052 ahd_outb(ahd, HCNT + 2, resid >> 16); 5053 ahd_outb(ahd, HCNT + 1, resid >> 8); 5054 ahd_outb(ahd, HCNT, resid); 5055 } 5056 5057 /* 5058 * Handle the effects of issuing a bus device reset message. 5059 */ 5060 static void 5061 ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5062 u_int lun, cam_status status, char *message, 5063 int verbose_level) 5064 { 5065 #ifdef AHD_TARGET_MODE 5066 struct ahd_tmode_tstate* tstate; 5067 #endif 5068 int found; 5069 5070 found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel, 5071 lun, SCB_LIST_NULL, devinfo->role, 5072 status); 5073 5074 #ifdef AHD_TARGET_MODE 5075 /* 5076 * Send an immediate notify ccb to all target mord peripheral 5077 * drivers affected by this action. 5078 */ 5079 tstate = ahd->enabled_targets[devinfo->our_scsiid]; 5080 if (tstate != NULL) { 5081 u_int cur_lun; 5082 u_int max_lun; 5083 5084 if (lun != CAM_LUN_WILDCARD) { 5085 cur_lun = 0; 5086 max_lun = AHD_NUM_LUNS - 1; 5087 } else { 5088 cur_lun = lun; 5089 max_lun = lun; 5090 } 5091 for (cur_lun <= max_lun; cur_lun++) { 5092 struct ahd_tmode_lstate* lstate; 5093 5094 lstate = tstate->enabled_luns[cur_lun]; 5095 if (lstate == NULL) 5096 continue; 5097 5098 ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid, 5099 MSG_BUS_DEV_RESET, /*arg*/0); 5100 ahd_send_lstate_events(ahd, lstate); 5101 } 5102 } 5103 #endif 5104 5105 /* 5106 * Go back to async/narrow transfers and renegotiate. 5107 */ 5108 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 5109 AHD_TRANS_CUR, /*paused*/TRUE); 5110 ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0, 5111 /*ppr_options*/0, AHD_TRANS_CUR, 5112 /*paused*/TRUE); 5113 5114 if (status != CAM_SEL_TIMEOUT) 5115 ahd_send_async(ahd, devinfo->channel, devinfo->target, 5116 lun, AC_SENT_BDR, NULL); 5117 5118 if (message != NULL 5119 && (verbose_level <= bootverbose)) { 5120 AHD_CORRECTABLE_ERROR(ahd); 5121 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd), 5122 message, devinfo->channel, devinfo->target, found); 5123 } 5124 } 5125 5126 #ifdef AHD_TARGET_MODE 5127 static void 5128 ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, 5129 struct scb *scb) 5130 { 5131 5132 /* 5133 * To facilitate adding multiple messages together, 5134 * each routine should increment the index and len 5135 * variables instead of setting them explicitly. 5136 */ 5137 ahd->msgout_index = 0; 5138 ahd->msgout_len = 0; 5139 5140 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0) 5141 ahd_build_transfer_msg(ahd, devinfo); 5142 else 5143 panic("ahd_intr: AWAITING target message with no message"); 5144 5145 ahd->msgout_index = 0; 5146 ahd->msg_type = MSG_TYPE_TARGET_MSGIN; 5147 } 5148 #endif 5149 /**************************** Initialization **********************************/ 5150 static u_int 5151 ahd_sglist_size(struct ahd_softc *ahd) 5152 { 5153 bus_size_t list_size; 5154 5155 list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG; 5156 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 5157 list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG; 5158 return (list_size); 5159 } 5160 5161 /* 5162 * Calculate the optimum S/G List allocation size. S/G elements used 5163 * for a given transaction must be physically contiguous. Assume the 5164 * OS will allocate full pages to us, so it doesn't make sense to request 5165 * less than a page. 5166 */ 5167 static u_int 5168 ahd_sglist_allocsize(struct ahd_softc *ahd) 5169 { 5170 bus_size_t sg_list_increment; 5171 bus_size_t sg_list_size; 5172 bus_size_t max_list_size; 5173 bus_size_t best_list_size; 5174 5175 /* Start out with the minimum required for AHD_NSEG. */ 5176 sg_list_increment = ahd_sglist_size(ahd); 5177 sg_list_size = sg_list_increment; 5178 5179 /* Get us as close as possible to a page in size. */ 5180 while ((sg_list_size + sg_list_increment) <= PAGE_SIZE) 5181 sg_list_size += sg_list_increment; 5182 5183 /* 5184 * Try to reduce the amount of wastage by allocating 5185 * multiple pages. 5186 */ 5187 best_list_size = sg_list_size; 5188 max_list_size = roundup(sg_list_increment, PAGE_SIZE); 5189 if (max_list_size < 4 * PAGE_SIZE) 5190 max_list_size = 4 * PAGE_SIZE; 5191 if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment)) 5192 max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment); 5193 while ((sg_list_size + sg_list_increment) <= max_list_size 5194 && (sg_list_size % PAGE_SIZE) != 0) { 5195 bus_size_t new_mod; 5196 bus_size_t best_mod; 5197 5198 sg_list_size += sg_list_increment; 5199 new_mod = sg_list_size % PAGE_SIZE; 5200 best_mod = best_list_size % PAGE_SIZE; 5201 if (new_mod > best_mod || new_mod == 0) { 5202 best_list_size = sg_list_size; 5203 } 5204 } 5205 return (best_list_size); 5206 } 5207 5208 /* 5209 * Allocate a controller structure for a new device 5210 * and perform initial initializion. 5211 */ 5212 struct ahd_softc * 5213 ahd_alloc(void *platform_arg, char *name) 5214 { 5215 struct ahd_softc *ahd; 5216 5217 ahd = device_get_softc((device_t)platform_arg); 5218 memset(ahd, 0, sizeof(*ahd)); 5219 ahd->seep_config = malloc(sizeof(*ahd->seep_config), 5220 M_DEVBUF, M_NOWAIT); 5221 if (ahd->seep_config == NULL) { 5222 free(name, M_DEVBUF); 5223 return (NULL); 5224 } 5225 LIST_INIT(&ahd->pending_scbs); 5226 LIST_INIT(&ahd->timedout_scbs); 5227 /* We don't know our unit number until the OSM sets it */ 5228 ahd->name = name; 5229 ahd->unit = -1; 5230 ahd->description = NULL; 5231 ahd->bus_description = NULL; 5232 ahd->channel = 'A'; 5233 ahd->chip = AHD_NONE; 5234 ahd->features = AHD_FENONE; 5235 ahd->bugs = AHD_BUGNONE; 5236 ahd->flags = AHD_SPCHK_ENB_A|AHD_RESET_BUS_A|AHD_TERM_ENB_A 5237 | AHD_EXTENDED_TRANS_A|AHD_STPWLEVEL_A; 5238 aic_timer_init(&ahd->reset_timer); 5239 aic_timer_init(&ahd->stat_timer); 5240 ahd->int_coalescing_timer = AHD_INT_COALESCING_TIMER_DEFAULT; 5241 ahd->int_coalescing_maxcmds = AHD_INT_COALESCING_MAXCMDS_DEFAULT; 5242 ahd->int_coalescing_mincmds = AHD_INT_COALESCING_MINCMDS_DEFAULT; 5243 ahd->int_coalescing_threshold = AHD_INT_COALESCING_THRESHOLD_DEFAULT; 5244 ahd->int_coalescing_stop_threshold = 5245 AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT; 5246 5247 if (ahd_platform_alloc(ahd, platform_arg) != 0) { 5248 ahd_free(ahd); 5249 ahd = NULL; 5250 } 5251 ahd_lockinit(ahd); 5252 #ifdef AHD_DEBUG 5253 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) { 5254 printf("%s: scb size = 0x%x, hscb size = 0x%x\n", 5255 ahd_name(ahd), (u_int)sizeof(struct scb), 5256 (u_int)sizeof(struct hardware_scb)); 5257 } 5258 #endif 5259 return (ahd); 5260 } 5261 5262 int 5263 ahd_softc_init(struct ahd_softc *ahd) 5264 { 5265 5266 ahd->unpause = 0; 5267 ahd->pause = PAUSE; 5268 return (0); 5269 } 5270 5271 void 5272 ahd_softc_insert(struct ahd_softc *ahd) 5273 { 5274 struct ahd_softc *list_ahd; 5275 5276 #if AIC_PCI_CONFIG > 0 5277 /* 5278 * Second Function PCI devices need to inherit some 5279 * settings from function 0. 5280 */ 5281 if ((ahd->features & AHD_MULTI_FUNC) != 0) { 5282 TAILQ_FOREACH(list_ahd, &ahd_tailq, links) { 5283 aic_dev_softc_t list_pci; 5284 aic_dev_softc_t pci; 5285 5286 list_pci = list_ahd->dev_softc; 5287 pci = ahd->dev_softc; 5288 if (aic_get_pci_slot(list_pci) == aic_get_pci_slot(pci) 5289 && aic_get_pci_bus(list_pci) == aic_get_pci_bus(pci)) { 5290 struct ahd_softc *master; 5291 struct ahd_softc *slave; 5292 5293 if (aic_get_pci_function(list_pci) == 0) { 5294 master = list_ahd; 5295 slave = ahd; 5296 } else { 5297 master = ahd; 5298 slave = list_ahd; 5299 } 5300 slave->flags &= ~AHD_BIOS_ENABLED; 5301 slave->flags |= 5302 master->flags & AHD_BIOS_ENABLED; 5303 break; 5304 } 5305 } 5306 } 5307 #endif 5308 5309 /* 5310 * Insertion sort into our list of softcs. 5311 */ 5312 list_ahd = TAILQ_FIRST(&ahd_tailq); 5313 while (list_ahd != NULL 5314 && ahd_softc_comp(ahd, list_ahd) <= 0) 5315 list_ahd = TAILQ_NEXT(list_ahd, links); 5316 if (list_ahd != NULL) 5317 TAILQ_INSERT_BEFORE(list_ahd, ahd, links); 5318 else 5319 TAILQ_INSERT_TAIL(&ahd_tailq, ahd, links); 5320 ahd->init_level++; 5321 } 5322 5323 void 5324 ahd_set_unit(struct ahd_softc *ahd, int unit) 5325 { 5326 ahd->unit = unit; 5327 } 5328 5329 void 5330 ahd_set_name(struct ahd_softc *ahd, char *name) 5331 { 5332 if (ahd->name != NULL) 5333 free(ahd->name, M_DEVBUF); 5334 ahd->name = name; 5335 } 5336 5337 void 5338 ahd_free(struct ahd_softc *ahd) 5339 { 5340 int i; 5341 5342 ahd_terminate_recovery_thread(ahd); 5343 switch (ahd->init_level) { 5344 default: 5345 case 5: 5346 ahd_shutdown(ahd); 5347 /* FALLTHROUGH */ 5348 case 4: 5349 aic_dmamap_unload(ahd, ahd->shared_data_dmat, 5350 ahd->shared_data_map.dmamap); 5351 /* FALLTHROUGH */ 5352 case 3: 5353 aic_dmamem_free(ahd, ahd->shared_data_dmat, ahd->qoutfifo, 5354 ahd->shared_data_map.dmamap); 5355 /* FALLTHROUGH */ 5356 case 2: 5357 aic_dma_tag_destroy(ahd, ahd->shared_data_dmat); 5358 case 1: 5359 aic_dma_tag_destroy(ahd, ahd->buffer_dmat); 5360 break; 5361 case 0: 5362 break; 5363 } 5364 5365 aic_dma_tag_destroy(ahd, ahd->parent_dmat); 5366 ahd_platform_free(ahd); 5367 ahd_fini_scbdata(ahd); 5368 for (i = 0; i < AHD_NUM_TARGETS; i++) { 5369 struct ahd_tmode_tstate *tstate; 5370 5371 tstate = ahd->enabled_targets[i]; 5372 if (tstate != NULL) { 5373 #ifdef AHD_TARGET_MODE 5374 int j; 5375 5376 for (j = 0; j < AHD_NUM_LUNS; j++) { 5377 struct ahd_tmode_lstate *lstate; 5378 5379 lstate = tstate->enabled_luns[j]; 5380 if (lstate != NULL) { 5381 xpt_free_path(lstate->path); 5382 free(lstate, M_DEVBUF); 5383 } 5384 } 5385 #endif 5386 free(tstate, M_DEVBUF); 5387 } 5388 } 5389 #ifdef AHD_TARGET_MODE 5390 if (ahd->black_hole != NULL) { 5391 xpt_free_path(ahd->black_hole->path); 5392 free(ahd->black_hole, M_DEVBUF); 5393 } 5394 #endif 5395 if (ahd->name != NULL) 5396 free(ahd->name, M_DEVBUF); 5397 if (ahd->seep_config != NULL) 5398 free(ahd->seep_config, M_DEVBUF); 5399 if (ahd->saved_stack != NULL) 5400 free(ahd->saved_stack, M_DEVBUF); 5401 return; 5402 } 5403 5404 void 5405 ahd_shutdown(void *arg) 5406 { 5407 struct ahd_softc *ahd; 5408 5409 ahd = (struct ahd_softc *)arg; 5410 5411 /* 5412 * Stop periodic timer callbacks. 5413 */ 5414 aic_timer_stop(&ahd->reset_timer); 5415 aic_timer_stop(&ahd->stat_timer); 5416 5417 /* This will reset most registers to 0, but not all */ 5418 ahd_reset(ahd, /*reinit*/FALSE); 5419 } 5420 5421 /* 5422 * Reset the controller and record some information about it 5423 * that is only available just after a reset. If "reinit" is 5424 * non-zero, this reset occurred after initial configuration 5425 * and the caller requests that the chip be fully reinitialized 5426 * to a runable state. Chip interrupts are *not* enabled after 5427 * a reinitialization. The caller must enable interrupts via 5428 * ahd_intr_enable(). 5429 */ 5430 int 5431 ahd_reset(struct ahd_softc *ahd, int reinit) 5432 { 5433 u_int sxfrctl1; 5434 int wait; 5435 uint32_t cmd; 5436 5437 /* 5438 * Preserve the value of the SXFRCTL1 register for all channels. 5439 * It contains settings that affect termination and we don't want 5440 * to disturb the integrity of the bus. 5441 */ 5442 ahd_pause(ahd); 5443 ahd_update_modes(ahd); 5444 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5445 sxfrctl1 = ahd_inb(ahd, SXFRCTL1); 5446 5447 cmd = aic_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2); 5448 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5449 uint32_t mod_cmd; 5450 5451 /* 5452 * A4 Razor #632 5453 * During the assertion of CHIPRST, the chip 5454 * does not disable its parity logic prior to 5455 * the start of the reset. This may cause a 5456 * parity error to be detected and thus a 5457 * spurious SERR or PERR assertion. Disable 5458 * PERR and SERR responses during the CHIPRST. 5459 */ 5460 mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN); 5461 aic_pci_write_config(ahd->dev_softc, PCIR_COMMAND, 5462 mod_cmd, /*bytes*/2); 5463 } 5464 ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause); 5465 5466 /* 5467 * Ensure that the reset has finished. We delay 1000us 5468 * prior to reading the register to make sure the chip 5469 * has sufficiently completed its reset to handle register 5470 * accesses. 5471 */ 5472 wait = 1000; 5473 do { 5474 aic_delay(1000); 5475 } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK)); 5476 5477 if (wait == 0) { 5478 printf("%s: WARNING - Failed chip reset! " 5479 "Trying to initialize anyway.\n", ahd_name(ahd)); 5480 AHD_FATAL_ERROR(ahd); 5481 } 5482 ahd_outb(ahd, HCNTRL, ahd->pause); 5483 5484 if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) { 5485 /* 5486 * Clear any latched PCI error status and restore 5487 * previous SERR and PERR response enables. 5488 */ 5489 aic_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1, 5490 0xFF, /*bytes*/1); 5491 aic_pci_write_config(ahd->dev_softc, PCIR_COMMAND, 5492 cmd, /*bytes*/2); 5493 } 5494 5495 /* 5496 * Mode should be SCSI after a chip reset, but lets 5497 * set it just to be safe. We touch the MODE_PTR 5498 * register directly so as to bypass the lazy update 5499 * code in ahd_set_modes(). 5500 */ 5501 ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5502 ahd_outb(ahd, MODE_PTR, 5503 ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI)); 5504 5505 /* 5506 * Restore SXFRCTL1. 5507 * 5508 * We must always initialize STPWEN to 1 before we 5509 * restore the saved values. STPWEN is initialized 5510 * to a tri-state condition which can only be cleared 5511 * by turning it on. 5512 */ 5513 ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN); 5514 ahd_outb(ahd, SXFRCTL1, sxfrctl1); 5515 5516 /* Determine chip configuration */ 5517 ahd->features &= ~AHD_WIDE; 5518 if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0) 5519 ahd->features |= AHD_WIDE; 5520 5521 /* 5522 * If a recovery action has forced a chip reset, 5523 * re-initialize the chip to our liking. 5524 */ 5525 if (reinit != 0) 5526 ahd_chip_init(ahd); 5527 5528 return (0); 5529 } 5530 5531 /* 5532 * Determine the number of SCBs available on the controller 5533 */ 5534 int 5535 ahd_probe_scbs(struct ahd_softc *ahd) { 5536 int i; 5537 5538 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK), 5539 ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK)); 5540 for (i = 0; i < AHD_SCB_MAX; i++) { 5541 int j; 5542 5543 ahd_set_scbptr(ahd, i); 5544 ahd_outw(ahd, SCB_BASE, i); 5545 for (j = 2; j < 64; j++) 5546 ahd_outb(ahd, SCB_BASE+j, 0); 5547 /* Start out life as unallocated (needing an abort) */ 5548 ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE); 5549 if (ahd_inw_scbram(ahd, SCB_BASE) != i) 5550 break; 5551 ahd_set_scbptr(ahd, 0); 5552 if (ahd_inw_scbram(ahd, SCB_BASE) != 0) 5553 break; 5554 } 5555 return (i); 5556 } 5557 5558 static void 5559 ahd_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 5560 { 5561 bus_addr_t *baddr; 5562 5563 baddr = (bus_addr_t *)arg; 5564 *baddr = segs->ds_addr; 5565 } 5566 5567 static void 5568 ahd_initialize_hscbs(struct ahd_softc *ahd) 5569 { 5570 int i; 5571 5572 for (i = 0; i < ahd->scb_data.maxhscbs; i++) { 5573 ahd_set_scbptr(ahd, i); 5574 5575 /* Clear the control byte. */ 5576 ahd_outb(ahd, SCB_CONTROL, 0); 5577 5578 /* Set the next pointer */ 5579 ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL); 5580 } 5581 } 5582 5583 static int 5584 ahd_init_scbdata(struct ahd_softc *ahd) 5585 { 5586 struct scb_data *scb_data; 5587 int i; 5588 5589 scb_data = &ahd->scb_data; 5590 TAILQ_INIT(&scb_data->free_scbs); 5591 for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++) 5592 LIST_INIT(&scb_data->free_scb_lists[i]); 5593 LIST_INIT(&scb_data->any_dev_free_scb_list); 5594 SLIST_INIT(&scb_data->hscb_maps); 5595 SLIST_INIT(&scb_data->sg_maps); 5596 SLIST_INIT(&scb_data->sense_maps); 5597 5598 /* Determine the number of hardware SCBs and initialize them */ 5599 scb_data->maxhscbs = ahd_probe_scbs(ahd); 5600 if (scb_data->maxhscbs == 0) { 5601 printf("%s: No SCB space found\n", ahd_name(ahd)); 5602 AHD_FATAL_ERROR(ahd); 5603 return (ENXIO); 5604 } 5605 5606 ahd_initialize_hscbs(ahd); 5607 5608 /* 5609 * Create our DMA tags. These tags define the kinds of device 5610 * accessible memory allocations and memory mappings we will 5611 * need to perform during normal operation. 5612 * 5613 * Unless we need to further restrict the allocation, we rely 5614 * on the restrictions of the parent dmat, hence the common 5615 * use of MAXADDR and MAXSIZE. 5616 */ 5617 5618 /* DMA tag for our hardware scb structures */ 5619 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 5620 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5621 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5622 /*highaddr*/BUS_SPACE_MAXADDR, 5623 /*filter*/NULL, /*filterarg*/NULL, 5624 PAGE_SIZE, /*nsegments*/1, 5625 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5626 /*flags*/0, &scb_data->hscb_dmat) != 0) { 5627 goto error_exit; 5628 } 5629 5630 scb_data->init_level++; 5631 5632 /* DMA tag for our S/G structures. */ 5633 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/8, 5634 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5635 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5636 /*highaddr*/BUS_SPACE_MAXADDR, 5637 /*filter*/NULL, /*filterarg*/NULL, 5638 ahd_sglist_allocsize(ahd), /*nsegments*/1, 5639 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5640 /*flags*/0, &scb_data->sg_dmat) != 0) { 5641 goto error_exit; 5642 } 5643 #ifdef AHD_DEBUG 5644 if ((ahd_debug & AHD_SHOW_MEMORY) != 0) 5645 printf("%s: ahd_sglist_allocsize = 0x%x\n", ahd_name(ahd), 5646 ahd_sglist_allocsize(ahd)); 5647 #endif 5648 5649 scb_data->init_level++; 5650 5651 /* DMA tag for our sense buffers. We allocate in page sized chunks */ 5652 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 5653 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 5654 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 5655 /*highaddr*/BUS_SPACE_MAXADDR, 5656 /*filter*/NULL, /*filterarg*/NULL, 5657 PAGE_SIZE, /*nsegments*/1, 5658 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 5659 /*flags*/0, &scb_data->sense_dmat) != 0) { 5660 goto error_exit; 5661 } 5662 5663 scb_data->init_level++; 5664 5665 /* Perform initial CCB allocation */ 5666 while (ahd_alloc_scbs(ahd) != 0) 5667 ; 5668 5669 if (scb_data->numscbs == 0) { 5670 printf("%s: ahd_init_scbdata - " 5671 "Unable to allocate initial scbs\n", 5672 ahd_name(ahd)); 5673 goto error_exit; 5674 } 5675 5676 /* 5677 * Note that we were successful 5678 */ 5679 return (0); 5680 5681 error_exit: 5682 5683 return (ENOMEM); 5684 } 5685 5686 static struct scb * 5687 ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag) 5688 { 5689 struct scb *scb; 5690 5691 /* 5692 * Look on the pending list. 5693 */ 5694 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 5695 if (SCB_GET_TAG(scb) == tag) 5696 return (scb); 5697 } 5698 5699 /* 5700 * Then on all of the collision free lists. 5701 */ 5702 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5703 struct scb *list_scb; 5704 5705 list_scb = scb; 5706 do { 5707 if (SCB_GET_TAG(list_scb) == tag) 5708 return (list_scb); 5709 list_scb = LIST_NEXT(list_scb, collision_links); 5710 } while (list_scb); 5711 } 5712 5713 /* 5714 * And finally on the generic free list. 5715 */ 5716 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 5717 if (SCB_GET_TAG(scb) == tag) 5718 return (scb); 5719 } 5720 5721 return (NULL); 5722 } 5723 5724 static void 5725 ahd_fini_scbdata(struct ahd_softc *ahd) 5726 { 5727 struct scb_data *scb_data; 5728 5729 scb_data = &ahd->scb_data; 5730 if (scb_data == NULL) 5731 return; 5732 5733 switch (scb_data->init_level) { 5734 default: 5735 case 7: 5736 { 5737 struct map_node *sns_map; 5738 5739 while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) { 5740 SLIST_REMOVE_HEAD(&scb_data->sense_maps, links); 5741 aic_dmamap_unload(ahd, scb_data->sense_dmat, 5742 sns_map->dmamap); 5743 aic_dmamem_free(ahd, scb_data->sense_dmat, 5744 sns_map->vaddr, sns_map->dmamap); 5745 free(sns_map, M_DEVBUF); 5746 } 5747 aic_dma_tag_destroy(ahd, scb_data->sense_dmat); 5748 /* FALLTHROUGH */ 5749 } 5750 case 6: 5751 { 5752 struct map_node *sg_map; 5753 5754 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) { 5755 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links); 5756 aic_dmamap_unload(ahd, scb_data->sg_dmat, 5757 sg_map->dmamap); 5758 aic_dmamem_free(ahd, scb_data->sg_dmat, 5759 sg_map->vaddr, sg_map->dmamap); 5760 free(sg_map, M_DEVBUF); 5761 } 5762 aic_dma_tag_destroy(ahd, scb_data->sg_dmat); 5763 /* FALLTHROUGH */ 5764 } 5765 case 5: 5766 { 5767 struct map_node *hscb_map; 5768 5769 while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) { 5770 SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links); 5771 aic_dmamap_unload(ahd, scb_data->hscb_dmat, 5772 hscb_map->dmamap); 5773 aic_dmamem_free(ahd, scb_data->hscb_dmat, 5774 hscb_map->vaddr, hscb_map->dmamap); 5775 free(hscb_map, M_DEVBUF); 5776 } 5777 aic_dma_tag_destroy(ahd, scb_data->hscb_dmat); 5778 /* FALLTHROUGH */ 5779 } 5780 case 4: 5781 case 3: 5782 case 2: 5783 case 1: 5784 case 0: 5785 break; 5786 } 5787 } 5788 5789 /* 5790 * DSP filter Bypass must be enabled until the first selection 5791 * after a change in bus mode (Razor #491 and #493). 5792 */ 5793 static void 5794 ahd_setup_iocell_workaround(struct ahd_softc *ahd) 5795 { 5796 ahd_mode_state saved_modes; 5797 5798 saved_modes = ahd_save_modes(ahd); 5799 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5800 ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL) 5801 | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS); 5802 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI)); 5803 #ifdef AHD_DEBUG 5804 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5805 printf("%s: Setting up iocell workaround\n", ahd_name(ahd)); 5806 #endif 5807 ahd_restore_modes(ahd, saved_modes); 5808 ahd->flags &= ~AHD_HAD_FIRST_SEL; 5809 } 5810 5811 static void 5812 ahd_iocell_first_selection(struct ahd_softc *ahd) 5813 { 5814 ahd_mode_state saved_modes; 5815 u_int sblkctl; 5816 5817 if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0) 5818 return; 5819 saved_modes = ahd_save_modes(ahd); 5820 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 5821 sblkctl = ahd_inb(ahd, SBLKCTL); 5822 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 5823 #ifdef AHD_DEBUG 5824 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5825 printf("%s: iocell first selection\n", ahd_name(ahd)); 5826 #endif 5827 if ((sblkctl & ENAB40) != 0) { 5828 ahd_outb(ahd, DSPDATACTL, 5829 ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB); 5830 #ifdef AHD_DEBUG 5831 if ((ahd_debug & AHD_SHOW_MISC) != 0) 5832 printf("%s: BYPASS now disabled\n", ahd_name(ahd)); 5833 #endif 5834 } 5835 ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI)); 5836 ahd_outb(ahd, CLRINT, CLRSCSIINT); 5837 ahd_restore_modes(ahd, saved_modes); 5838 ahd->flags |= AHD_HAD_FIRST_SEL; 5839 } 5840 5841 /*************************** SCB Management ***********************************/ 5842 static void 5843 ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx) 5844 { 5845 struct scb_list *free_list; 5846 struct scb_tailq *free_tailq; 5847 struct scb *first_scb; 5848 5849 scb->flags |= SCB_ON_COL_LIST; 5850 AHD_SET_SCB_COL_IDX(scb, col_idx); 5851 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5852 free_tailq = &ahd->scb_data.free_scbs; 5853 first_scb = LIST_FIRST(free_list); 5854 if (first_scb != NULL) { 5855 LIST_INSERT_AFTER(first_scb, scb, collision_links); 5856 } else { 5857 LIST_INSERT_HEAD(free_list, scb, collision_links); 5858 TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe); 5859 } 5860 } 5861 5862 static void 5863 ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb) 5864 { 5865 struct scb_list *free_list; 5866 struct scb_tailq *free_tailq; 5867 struct scb *first_scb; 5868 u_int col_idx; 5869 5870 scb->flags &= ~SCB_ON_COL_LIST; 5871 col_idx = AHD_GET_SCB_COL_IDX(ahd, scb); 5872 free_list = &ahd->scb_data.free_scb_lists[col_idx]; 5873 free_tailq = &ahd->scb_data.free_scbs; 5874 first_scb = LIST_FIRST(free_list); 5875 if (first_scb == scb) { 5876 struct scb *next_scb; 5877 5878 /* 5879 * Maintain order in the collision free 5880 * lists for fairness if this device has 5881 * other colliding tags active. 5882 */ 5883 next_scb = LIST_NEXT(scb, collision_links); 5884 if (next_scb != NULL) { 5885 TAILQ_INSERT_AFTER(free_tailq, scb, 5886 next_scb, links.tqe); 5887 } 5888 TAILQ_REMOVE(free_tailq, scb, links.tqe); 5889 } 5890 LIST_REMOVE(scb, collision_links); 5891 } 5892 5893 /* 5894 * Get a free scb. If there are none, see if we can allocate a new SCB. 5895 */ 5896 struct scb * 5897 ahd_get_scb(struct ahd_softc *ahd, u_int col_idx) 5898 { 5899 struct scb *scb; 5900 int tries; 5901 5902 tries = 0; 5903 look_again: 5904 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 5905 if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) { 5906 ahd_rem_col_list(ahd, scb); 5907 goto found; 5908 } 5909 } 5910 if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL) { 5911 if (tries++ != 0) 5912 return (NULL); 5913 if (ahd_alloc_scbs(ahd) == 0) 5914 return (NULL); 5915 goto look_again; 5916 } 5917 LIST_REMOVE(scb, links.le); 5918 if (col_idx != AHD_NEVER_COL_IDX 5919 && (scb->col_scb != NULL) 5920 && (scb->col_scb->flags & SCB_ACTIVE) == 0) { 5921 LIST_REMOVE(scb->col_scb, links.le); 5922 ahd_add_col_list(ahd, scb->col_scb, col_idx); 5923 } 5924 found: 5925 scb->flags |= SCB_ACTIVE; 5926 return (scb); 5927 } 5928 5929 /* 5930 * Return an SCB resource to the free list. 5931 */ 5932 void 5933 ahd_free_scb(struct ahd_softc *ahd, struct scb *scb) 5934 { 5935 5936 /* Clean up for the next user */ 5937 scb->flags = SCB_FLAG_NONE; 5938 scb->hscb->control = 0; 5939 ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL; 5940 5941 if (scb->col_scb == NULL) { 5942 /* 5943 * No collision possible. Just free normally. 5944 */ 5945 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5946 scb, links.le); 5947 } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) { 5948 /* 5949 * The SCB we might have collided with is on 5950 * a free collision list. Put both SCBs on 5951 * the generic list. 5952 */ 5953 ahd_rem_col_list(ahd, scb->col_scb); 5954 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5955 scb, links.le); 5956 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5957 scb->col_scb, links.le); 5958 } else if ((scb->col_scb->flags 5959 & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE 5960 && (scb->col_scb->hscb->control & TAG_ENB) != 0) { 5961 /* 5962 * The SCB we might collide with on the next allocation 5963 * is still active in a non-packetized, tagged, context. 5964 * Put us on the SCB collision list. 5965 */ 5966 ahd_add_col_list(ahd, scb, 5967 AHD_GET_SCB_COL_IDX(ahd, scb->col_scb)); 5968 } else { 5969 /* 5970 * The SCB we might collide with on the next allocation 5971 * is either active in a packetized context, or free. 5972 * Since we can't collide, put this SCB on the generic 5973 * free list. 5974 */ 5975 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list, 5976 scb, links.le); 5977 } 5978 5979 aic_platform_scb_free(ahd, scb); 5980 } 5981 5982 int 5983 ahd_alloc_scbs(struct ahd_softc *ahd) 5984 { 5985 struct scb_data *scb_data; 5986 struct scb *next_scb; 5987 struct hardware_scb *hscb; 5988 struct map_node *hscb_map; 5989 struct map_node *sg_map; 5990 struct map_node *sense_map; 5991 uint8_t *segs; 5992 uint8_t *sense_data; 5993 bus_addr_t hscb_busaddr; 5994 bus_addr_t sg_busaddr; 5995 bus_addr_t sense_busaddr; 5996 int newcount; 5997 int i; 5998 5999 scb_data = &ahd->scb_data; 6000 if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC) 6001 /* Can't allocate any more */ 6002 return (0); 6003 6004 if (scb_data->scbs_left != 0) { 6005 int offset; 6006 6007 offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left; 6008 hscb_map = SLIST_FIRST(&scb_data->hscb_maps); 6009 hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset]; 6010 hscb_busaddr = hscb_map->busaddr + (offset * sizeof(*hscb)); 6011 } else { 6012 hscb_map = malloc(sizeof(*hscb_map), M_DEVBUF, M_NOWAIT); 6013 6014 if (hscb_map == NULL) 6015 return (0); 6016 6017 /* Allocate the next batch of hardware SCBs */ 6018 if (aic_dmamem_alloc(ahd, scb_data->hscb_dmat, 6019 (void **)&hscb_map->vaddr, 6020 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6021 &hscb_map->dmamap) != 0) { 6022 free(hscb_map, M_DEVBUF); 6023 return (0); 6024 } 6025 6026 SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links); 6027 6028 aic_dmamap_load(ahd, scb_data->hscb_dmat, hscb_map->dmamap, 6029 hscb_map->vaddr, PAGE_SIZE, ahd_dmamap_cb, 6030 &hscb_map->busaddr, /*flags*/0); 6031 6032 hscb = (struct hardware_scb *)hscb_map->vaddr; 6033 hscb_busaddr = hscb_map->busaddr; 6034 scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb); 6035 } 6036 6037 if (scb_data->sgs_left != 0) { 6038 int offset; 6039 6040 offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd)) 6041 - scb_data->sgs_left) * ahd_sglist_size(ahd); 6042 sg_map = SLIST_FIRST(&scb_data->sg_maps); 6043 segs = sg_map->vaddr + offset; 6044 sg_busaddr = sg_map->busaddr + offset; 6045 } else { 6046 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT); 6047 6048 if (sg_map == NULL) 6049 return (0); 6050 6051 /* Allocate the next batch of S/G lists */ 6052 if (aic_dmamem_alloc(ahd, scb_data->sg_dmat, 6053 (void **)&sg_map->vaddr, 6054 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6055 &sg_map->dmamap) != 0) { 6056 free(sg_map, M_DEVBUF); 6057 return (0); 6058 } 6059 6060 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links); 6061 6062 aic_dmamap_load(ahd, scb_data->sg_dmat, sg_map->dmamap, 6063 sg_map->vaddr, ahd_sglist_allocsize(ahd), 6064 ahd_dmamap_cb, &sg_map->busaddr, /*flags*/0); 6065 6066 segs = sg_map->vaddr; 6067 sg_busaddr = sg_map->busaddr; 6068 scb_data->sgs_left = 6069 ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd); 6070 #ifdef AHD_DEBUG 6071 if (ahd_debug & AHD_SHOW_MEMORY) 6072 printf("Mapped SG data\n"); 6073 #endif 6074 } 6075 6076 if (scb_data->sense_left != 0) { 6077 int offset; 6078 6079 offset = PAGE_SIZE - (AHD_SENSE_BUFSIZE * scb_data->sense_left); 6080 sense_map = SLIST_FIRST(&scb_data->sense_maps); 6081 sense_data = sense_map->vaddr + offset; 6082 sense_busaddr = sense_map->busaddr + offset; 6083 } else { 6084 sense_map = malloc(sizeof(*sense_map), M_DEVBUF, M_NOWAIT); 6085 6086 if (sense_map == NULL) 6087 return (0); 6088 6089 /* Allocate the next batch of sense buffers */ 6090 if (aic_dmamem_alloc(ahd, scb_data->sense_dmat, 6091 (void **)&sense_map->vaddr, 6092 BUS_DMA_NOWAIT, &sense_map->dmamap) != 0) { 6093 free(sense_map, M_DEVBUF); 6094 return (0); 6095 } 6096 6097 SLIST_INSERT_HEAD(&scb_data->sense_maps, sense_map, links); 6098 6099 aic_dmamap_load(ahd, scb_data->sense_dmat, sense_map->dmamap, 6100 sense_map->vaddr, PAGE_SIZE, ahd_dmamap_cb, 6101 &sense_map->busaddr, /*flags*/0); 6102 6103 sense_data = sense_map->vaddr; 6104 sense_busaddr = sense_map->busaddr; 6105 scb_data->sense_left = PAGE_SIZE / AHD_SENSE_BUFSIZE; 6106 #ifdef AHD_DEBUG 6107 if (ahd_debug & AHD_SHOW_MEMORY) 6108 printf("Mapped sense data\n"); 6109 #endif 6110 } 6111 6112 newcount = MIN(scb_data->sense_left, scb_data->scbs_left); 6113 newcount = MIN(newcount, scb_data->sgs_left); 6114 newcount = MIN(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs)); 6115 scb_data->sense_left -= newcount; 6116 scb_data->scbs_left -= newcount; 6117 scb_data->sgs_left -= newcount; 6118 for (i = 0; i < newcount; i++) { 6119 struct scb_platform_data *pdata; 6120 u_int col_tag; 6121 int error; 6122 6123 next_scb = (struct scb *)malloc(sizeof(*next_scb), 6124 M_DEVBUF, M_NOWAIT); 6125 if (next_scb == NULL) 6126 break; 6127 6128 pdata = (struct scb_platform_data *)malloc(sizeof(*pdata), 6129 M_DEVBUF, M_NOWAIT); 6130 if (pdata == NULL) { 6131 free(next_scb, M_DEVBUF); 6132 break; 6133 } 6134 next_scb->platform_data = pdata; 6135 next_scb->hscb_map = hscb_map; 6136 next_scb->sg_map = sg_map; 6137 next_scb->sense_map = sense_map; 6138 next_scb->sg_list = segs; 6139 next_scb->sense_data = sense_data; 6140 next_scb->sense_busaddr = sense_busaddr; 6141 memset(hscb, 0, sizeof(*hscb)); 6142 next_scb->hscb = hscb; 6143 hscb->hscb_busaddr = aic_htole32(hscb_busaddr); 6144 6145 /* 6146 * The sequencer always starts with the second entry. 6147 * The first entry is embedded in the scb. 6148 */ 6149 next_scb->sg_list_busaddr = sg_busaddr; 6150 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 6151 next_scb->sg_list_busaddr 6152 += sizeof(struct ahd_dma64_seg); 6153 else 6154 next_scb->sg_list_busaddr += sizeof(struct ahd_dma_seg); 6155 next_scb->ahd_softc = ahd; 6156 next_scb->flags = SCB_FLAG_NONE; 6157 error = aic_dmamap_create(ahd, ahd->buffer_dmat, /*flags*/0, 6158 &next_scb->dmamap); 6159 if (error != 0) { 6160 free(next_scb, M_DEVBUF); 6161 free(pdata, M_DEVBUF); 6162 break; 6163 } 6164 6165 next_scb->hscb->tag = aic_htole16(scb_data->numscbs); 6166 col_tag = scb_data->numscbs ^ 0x100; 6167 next_scb->col_scb = ahd_find_scb_by_tag(ahd, col_tag); 6168 if (next_scb->col_scb != NULL) 6169 next_scb->col_scb->col_scb = next_scb; 6170 aic_timer_init(&next_scb->io_timer); 6171 ahd_free_scb(ahd, next_scb); 6172 hscb++; 6173 hscb_busaddr += sizeof(*hscb); 6174 segs += ahd_sglist_size(ahd); 6175 sg_busaddr += ahd_sglist_size(ahd); 6176 sense_data += AHD_SENSE_BUFSIZE; 6177 sense_busaddr += AHD_SENSE_BUFSIZE; 6178 scb_data->numscbs++; 6179 } 6180 return (i); 6181 } 6182 6183 void 6184 ahd_controller_info(struct ahd_softc *ahd, char *buf) 6185 { 6186 const char *speed; 6187 const char *type; 6188 int len; 6189 6190 len = sprintf(buf, "%s: ", ahd_chip_names[ahd->chip & AHD_CHIPID_MASK]); 6191 buf += len; 6192 6193 speed = "Ultra320 "; 6194 if ((ahd->features & AHD_WIDE) != 0) { 6195 type = "Wide "; 6196 } else { 6197 type = "Single "; 6198 } 6199 len = sprintf(buf, "%s%sChannel %c, SCSI Id=%d, ", 6200 speed, type, ahd->channel, ahd->our_id); 6201 buf += len; 6202 6203 sprintf(buf, "%s, %d SCBs", ahd->bus_description, 6204 ahd->scb_data.maxhscbs); 6205 } 6206 6207 static const char *channel_strings[] = { 6208 "Primary Low", 6209 "Primary High", 6210 "Secondary Low", 6211 "Secondary High" 6212 }; 6213 6214 static const char *termstat_strings[] = { 6215 "Terminated Correctly", 6216 "Over Terminated", 6217 "Under Terminated", 6218 "Not Configured" 6219 }; 6220 6221 /* 6222 * Start the board, ready for normal operation 6223 */ 6224 int 6225 ahd_init(struct ahd_softc *ahd) 6226 { 6227 uint8_t *next_vaddr; 6228 bus_addr_t next_baddr; 6229 size_t driver_data_size; 6230 int i; 6231 int error; 6232 #ifdef AHD_TARGET_MODE 6233 int tmode_enable; 6234 #endif 6235 u_int warn_user; 6236 uint8_t current_sensing; 6237 uint8_t fstat; 6238 6239 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6240 6241 ahd->stack_size = ahd_probe_stack_size(ahd); 6242 ahd->saved_stack = malloc(ahd->stack_size * sizeof(uint16_t), 6243 M_DEVBUF, M_NOWAIT); 6244 if (ahd->saved_stack == NULL) 6245 return (ENOMEM); 6246 6247 /* 6248 * Verify that the compiler hasn't over-agressively 6249 * padded important structures. 6250 */ 6251 if (sizeof(struct hardware_scb) != 64) 6252 panic("Hardware SCB size is incorrect"); 6253 6254 #ifdef AHD_DEBUG 6255 if ((ahd_debug & AHD_DEBUG_SEQUENCER) != 0) 6256 ahd->flags |= AHD_SEQUENCER_DEBUG; 6257 #endif 6258 6259 /* 6260 * Default to allowing initiator operations. 6261 */ 6262 ahd->flags |= AHD_INITIATORROLE; 6263 6264 /* 6265 * Only allow target mode features if this unit has them enabled. 6266 */ 6267 #ifdef AHD_TARGET_MODE 6268 tmode_enable = ((AHD_TMODE_ENABLE & (0x1 << ahd->unit)) != 0); 6269 resource_int_value(device_get_name(ahd->dev_softc), 6270 device_get_unit(ahd->dev_softc), 6271 "tmode_enable", &tmode_enable); 6272 6273 if (tmode_enable == 0) { 6274 ahd->features &= ~AHD_TARGETMODE; 6275 } else { 6276 if (bootverbose && ((ahd->features & AHD_TARGETMODE) != 0)) 6277 printf("%s: enabling target mode\n", ahd_name(ahd)); 6278 } 6279 6280 #else 6281 ahd->features &= ~AHD_TARGETMODE; 6282 #endif 6283 6284 /* DMA tag for mapping buffers into device visible space. */ 6285 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 6286 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 6287 /*lowaddr*/ahd->flags & AHD_39BIT_ADDRESSING 6288 ? (bus_addr_t)0x7FFFFFFFFFULL 6289 : BUS_SPACE_MAXADDR_32BIT, 6290 /*highaddr*/BUS_SPACE_MAXADDR, 6291 /*filter*/NULL, /*filterarg*/NULL, 6292 /*maxsize*/(AHD_NSEG - 1) * PAGE_SIZE, 6293 /*nsegments*/AHD_NSEG, 6294 /*maxsegsz*/AHD_MAXTRANSFER_SIZE, 6295 /*flags*/BUS_DMA_ALLOCNOW, 6296 &ahd->buffer_dmat) != 0) { 6297 return (ENOMEM); 6298 } 6299 6300 ahd->init_level++; 6301 6302 /* 6303 * DMA tag for our command fifos and other data in system memory 6304 * the card's sequencer must be able to access. For initiator 6305 * roles, we need to allocate space for the qoutfifo. When providing 6306 * for the target mode role, we must additionally provide space for 6307 * the incoming target command fifo. 6308 */ 6309 driver_data_size = AHD_SCB_MAX * sizeof(*ahd->qoutfifo) 6310 + sizeof(struct hardware_scb); 6311 if ((ahd->features & AHD_TARGETMODE) != 0) 6312 driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6313 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) 6314 driver_data_size += PKT_OVERRUN_BUFSIZE; 6315 if (aic_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1, 6316 /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1, 6317 /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, 6318 /*highaddr*/BUS_SPACE_MAXADDR, 6319 /*filter*/NULL, /*filterarg*/NULL, 6320 driver_data_size, 6321 /*nsegments*/1, 6322 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 6323 /*flags*/0, &ahd->shared_data_dmat) != 0) { 6324 return (ENOMEM); 6325 } 6326 6327 ahd->init_level++; 6328 6329 /* Allocation of driver data */ 6330 if (aic_dmamem_alloc(ahd, ahd->shared_data_dmat, 6331 (void **)&ahd->shared_data_map.vaddr, 6332 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 6333 &ahd->shared_data_map.dmamap) != 0) { 6334 return (ENOMEM); 6335 } 6336 6337 ahd->init_level++; 6338 6339 /* And permanently map it in */ 6340 aic_dmamap_load(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap, 6341 ahd->shared_data_map.vaddr, driver_data_size, 6342 ahd_dmamap_cb, &ahd->shared_data_map.busaddr, 6343 /*flags*/0); 6344 ahd->qoutfifo = (struct ahd_completion *)ahd->shared_data_map.vaddr; 6345 next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE]; 6346 next_baddr = ahd->shared_data_map.busaddr 6347 + AHD_QOUT_SIZE*sizeof(struct ahd_completion); 6348 if ((ahd->features & AHD_TARGETMODE) != 0) { 6349 ahd->targetcmds = (struct target_cmd *)next_vaddr; 6350 next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6351 next_baddr += AHD_TMODE_CMDS * sizeof(struct target_cmd); 6352 } 6353 6354 if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) { 6355 ahd->overrun_buf = next_vaddr; 6356 next_vaddr += PKT_OVERRUN_BUFSIZE; 6357 next_baddr += PKT_OVERRUN_BUFSIZE; 6358 } 6359 6360 /* 6361 * We need one SCB to serve as the "next SCB". Since the 6362 * tag identifier in this SCB will never be used, there is 6363 * no point in using a valid HSCB tag from an SCB pulled from 6364 * the standard free pool. So, we allocate this "sentinel" 6365 * specially from the DMA safe memory chunk used for the QOUTFIFO. 6366 */ 6367 ahd->next_queued_hscb = (struct hardware_scb *)next_vaddr; 6368 ahd->next_queued_hscb_map = &ahd->shared_data_map; 6369 ahd->next_queued_hscb->hscb_busaddr = aic_htole32(next_baddr); 6370 6371 ahd->init_level++; 6372 6373 /* Allocate SCB data now that buffer_dmat is initialized */ 6374 if (ahd_init_scbdata(ahd) != 0) 6375 return (ENOMEM); 6376 6377 if ((ahd->flags & AHD_INITIATORROLE) == 0) 6378 ahd->flags &= ~AHD_RESET_BUS_A; 6379 6380 /* 6381 * Before committing these settings to the chip, give 6382 * the OSM one last chance to modify our configuration. 6383 */ 6384 ahd_platform_init(ahd); 6385 6386 /* Bring up the chip. */ 6387 ahd_chip_init(ahd); 6388 6389 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 6390 6391 if ((ahd->flags & AHD_CURRENT_SENSING) == 0) 6392 goto init_done; 6393 6394 /* 6395 * Verify termination based on current draw and 6396 * warn user if the bus is over/under terminated. 6397 */ 6398 error = ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 6399 CURSENSE_ENB); 6400 if (error != 0) { 6401 printf("%s: current sensing timeout 1\n", ahd_name(ahd)); 6402 goto init_done; 6403 } 6404 for (i = 20, fstat = FLX_FSTAT_BUSY; 6405 (fstat & FLX_FSTAT_BUSY) != 0 && i; i--) { 6406 error = ahd_read_flexport(ahd, FLXADDR_FLEXSTAT, &fstat); 6407 if (error != 0) { 6408 printf("%s: current sensing timeout 2\n", 6409 ahd_name(ahd)); 6410 goto init_done; 6411 } 6412 } 6413 if (i == 0) { 6414 printf("%s: Timedout during current-sensing test\n", 6415 ahd_name(ahd)); 6416 goto init_done; 6417 } 6418 6419 /* Latch Current Sensing status. */ 6420 error = ahd_read_flexport(ahd, FLXADDR_CURRENT_STAT, ¤t_sensing); 6421 if (error != 0) { 6422 printf("%s: current sensing timeout 3\n", ahd_name(ahd)); 6423 goto init_done; 6424 } 6425 6426 /* Diable current sensing. */ 6427 ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0); 6428 6429 #ifdef AHD_DEBUG 6430 if ((ahd_debug & AHD_SHOW_TERMCTL) != 0) { 6431 printf("%s: current_sensing == 0x%x\n", 6432 ahd_name(ahd), current_sensing); 6433 } 6434 #endif 6435 warn_user = 0; 6436 for (i = 0; i < 4; i++, current_sensing >>= FLX_CSTAT_SHIFT) { 6437 u_int term_stat; 6438 6439 term_stat = (current_sensing & FLX_CSTAT_MASK); 6440 switch (term_stat) { 6441 case FLX_CSTAT_OVER: 6442 case FLX_CSTAT_UNDER: 6443 warn_user++; 6444 case FLX_CSTAT_INVALID: 6445 case FLX_CSTAT_OKAY: 6446 if (warn_user == 0 && bootverbose == 0) 6447 break; 6448 printf("%s: %s Channel %s\n", ahd_name(ahd), 6449 channel_strings[i], termstat_strings[term_stat]); 6450 break; 6451 } 6452 } 6453 if (warn_user) { 6454 printf("%s: WARNING. Termination is not configured correctly.\n" 6455 "%s: WARNING. SCSI bus operations may FAIL.\n", 6456 ahd_name(ahd), ahd_name(ahd)); 6457 AHD_CORRECTABLE_ERROR(ahd); 6458 } 6459 init_done: 6460 ahd_restart(ahd); 6461 aic_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_MS, 6462 ahd_stat_timer, ahd); 6463 return (0); 6464 } 6465 6466 /* 6467 * (Re)initialize chip state after a chip reset. 6468 */ 6469 static void 6470 ahd_chip_init(struct ahd_softc *ahd) 6471 { 6472 uint32_t busaddr; 6473 u_int sxfrctl1; 6474 u_int scsiseq_template; 6475 u_int wait; 6476 u_int i; 6477 u_int target; 6478 6479 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6480 /* 6481 * Take the LED out of diagnostic mode 6482 */ 6483 ahd_outb(ahd, SBLKCTL, ahd_inb(ahd, SBLKCTL) & ~(DIAGLEDEN|DIAGLEDON)); 6484 6485 /* 6486 * Return HS_MAILBOX to its default value. 6487 */ 6488 ahd->hs_mailbox = 0; 6489 ahd_outb(ahd, HS_MAILBOX, 0); 6490 6491 /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1. */ 6492 ahd_outb(ahd, IOWNID, ahd->our_id); 6493 ahd_outb(ahd, TOWNID, ahd->our_id); 6494 sxfrctl1 = (ahd->flags & AHD_TERM_ENB_A) != 0 ? STPWEN : 0; 6495 sxfrctl1 |= (ahd->flags & AHD_SPCHK_ENB_A) != 0 ? ENSPCHK : 0; 6496 if ((ahd->bugs & AHD_LONG_SETIMO_BUG) 6497 && (ahd->seltime != STIMESEL_MIN)) { 6498 /* 6499 * The selection timer duration is twice as long 6500 * as it should be. Halve it by adding "1" to 6501 * the user specified setting. 6502 */ 6503 sxfrctl1 |= ahd->seltime + STIMESEL_BUG_ADJ; 6504 } else { 6505 sxfrctl1 |= ahd->seltime; 6506 } 6507 6508 ahd_outb(ahd, SXFRCTL0, DFON); 6509 ahd_outb(ahd, SXFRCTL1, sxfrctl1|ahd->seltime|ENSTIMER|ACTNEGEN); 6510 ahd_outb(ahd, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR); 6511 6512 /* 6513 * Now that termination is set, wait for up 6514 * to 500ms for our transceivers to settle. If 6515 * the adapter does not have a cable attached, 6516 * the transceivers may never settle, so don't 6517 * complain if we fail here. 6518 */ 6519 for (wait = 10000; 6520 (ahd_inb(ahd, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait; 6521 wait--) 6522 aic_delay(100); 6523 6524 /* Clear any false bus resets due to the transceivers settling */ 6525 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 6526 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6527 6528 /* Initialize mode specific S/G state. */ 6529 for (i = 0; i < 2; i++) { 6530 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 6531 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR); 6532 ahd_outb(ahd, SG_STATE, 0); 6533 ahd_outb(ahd, CLRSEQINTSRC, 0xFF); 6534 ahd_outb(ahd, SEQIMODE, 6535 ENSAVEPTRS|ENCFG4DATA|ENCFG4ISTAT 6536 |ENCFG4TSTAT|ENCFG4ICMD|ENCFG4TCMD); 6537 } 6538 6539 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 6540 ahd_outb(ahd, DSCOMMAND0, ahd_inb(ahd, DSCOMMAND0)|MPARCKEN|CACHETHEN); 6541 ahd_outb(ahd, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75); 6542 ahd_outb(ahd, SIMODE0, ENIOERR|ENOVERRUN); 6543 ahd_outb(ahd, SIMODE3, ENNTRAMPERR|ENOSRAMPERR); 6544 if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) { 6545 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|AUTO_MSGOUT_DE); 6546 } else { 6547 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|BUSFREEREV|AUTO_MSGOUT_DE); 6548 } 6549 ahd_outb(ahd, SCSCHKN, CURRFIFODEF|WIDERESEN|SHVALIDSTDIS); 6550 if ((ahd->chip & AHD_BUS_MASK) == AHD_PCIX) 6551 /* 6552 * Do not issue a target abort when a split completion 6553 * error occurs. Let our PCIX interrupt handler deal 6554 * with it instead. H2A4 Razor #625 6555 */ 6556 ahd_outb(ahd, PCIXCTL, ahd_inb(ahd, PCIXCTL) | SPLTSTADIS); 6557 6558 if ((ahd->bugs & AHD_LQOOVERRUN_BUG) != 0) 6559 ahd_outb(ahd, LQOSCSCTL, LQONOCHKOVER); 6560 6561 /* 6562 * Tweak IOCELL settings. 6563 */ 6564 if ((ahd->flags & AHD_HP_BOARD) != 0) { 6565 for (i = 0; i < NUMDSPS; i++) { 6566 ahd_outb(ahd, DSPSELECT, i); 6567 ahd_outb(ahd, WRTBIASCTL, WRTBIASCTL_HP_DEFAULT); 6568 } 6569 #ifdef AHD_DEBUG 6570 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6571 printf("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd), 6572 WRTBIASCTL_HP_DEFAULT); 6573 #endif 6574 } 6575 ahd_setup_iocell_workaround(ahd); 6576 6577 /* 6578 * Enable LQI Manager interrupts. 6579 */ 6580 ahd_outb(ahd, LQIMODE1, ENLQIPHASE_LQ|ENLQIPHASE_NLQ|ENLIQABORT 6581 | ENLQICRCI_LQ|ENLQICRCI_NLQ|ENLQIBADLQI 6582 | ENLQIOVERI_LQ|ENLQIOVERI_NLQ); 6583 ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC); 6584 /* 6585 * We choose to have the sequencer catch LQOPHCHGINPKT errors 6586 * manually for the command phase at the start of a packetized 6587 * selection case. ENLQOBUSFREE should be made redundant by 6588 * the BUSFREE interrupt, but it seems that some LQOBUSFREE 6589 * events fail to assert the BUSFREE interrupt so we must 6590 * also enable LQOBUSFREE interrupts. 6591 */ 6592 ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE); 6593 6594 /* 6595 * Setup sequencer interrupt handlers. 6596 */ 6597 ahd_outw(ahd, INTVEC1_ADDR, ahd_resolve_seqaddr(ahd, LABEL_seq_isr)); 6598 ahd_outw(ahd, INTVEC2_ADDR, ahd_resolve_seqaddr(ahd, LABEL_timer_isr)); 6599 6600 /* 6601 * Setup SCB Offset registers. 6602 */ 6603 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6604 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, 6605 pkt_long_lun)); 6606 } else { 6607 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, lun)); 6608 } 6609 ahd_outb(ahd, CMDLENPTR, offsetof(struct hardware_scb, cdb_len)); 6610 ahd_outb(ahd, ATTRPTR, offsetof(struct hardware_scb, task_attribute)); 6611 ahd_outb(ahd, FLAGPTR, offsetof(struct hardware_scb, task_management)); 6612 ahd_outb(ahd, CMDPTR, offsetof(struct hardware_scb, 6613 shared_data.idata.cdb)); 6614 ahd_outb(ahd, QNEXTPTR, 6615 offsetof(struct hardware_scb, next_hscb_busaddr)); 6616 ahd_outb(ahd, ABRTBITPTR, MK_MESSAGE_BIT_OFFSET); 6617 ahd_outb(ahd, ABRTBYTEPTR, offsetof(struct hardware_scb, control)); 6618 if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) { 6619 ahd_outb(ahd, LUNLEN, 6620 sizeof(ahd->next_queued_hscb->pkt_long_lun) - 1); 6621 } else { 6622 ahd_outb(ahd, LUNLEN, LUNLEN_SINGLE_LEVEL_LUN); 6623 } 6624 ahd_outb(ahd, CDBLIMIT, SCB_CDB_LEN_PTR - 1); 6625 ahd_outb(ahd, MAXCMD, 0xFF); 6626 ahd_outb(ahd, SCBAUTOPTR, 6627 AUSCBPTR_EN | offsetof(struct hardware_scb, tag)); 6628 6629 /* We haven't been enabled for target mode yet. */ 6630 ahd_outb(ahd, MULTARGID, 0); 6631 ahd_outb(ahd, MULTARGID + 1, 0); 6632 6633 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6634 /* Initialize the negotiation table. */ 6635 if ((ahd->features & AHD_NEW_IOCELL_OPTS) == 0) { 6636 /* 6637 * Clear the spare bytes in the neg table to avoid 6638 * spurious parity errors. 6639 */ 6640 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6641 ahd_outb(ahd, NEGOADDR, target); 6642 ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PER_DEV0); 6643 for (i = 0; i < AHD_NUM_PER_DEV_ANNEXCOLS; i++) 6644 ahd_outb(ahd, ANNEXDAT, 0); 6645 } 6646 } 6647 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6648 struct ahd_devinfo devinfo; 6649 struct ahd_initiator_tinfo *tinfo; 6650 struct ahd_tmode_tstate *tstate; 6651 6652 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6653 target, &tstate); 6654 ahd_compile_devinfo(&devinfo, ahd->our_id, 6655 target, CAM_LUN_WILDCARD, 6656 'A', ROLE_INITIATOR); 6657 ahd_update_neg_table(ahd, &devinfo, &tinfo->curr); 6658 } 6659 6660 ahd_outb(ahd, CLRSINT3, NTRAMPERR|OSRAMPERR); 6661 ahd_outb(ahd, CLRINT, CLRSCSIINT); 6662 6663 #ifdef NEEDS_MORE_TESTING 6664 /* 6665 * Always enable abort on incoming L_Qs if this feature is 6666 * supported. We use this to catch invalid SCB references. 6667 */ 6668 if ((ahd->bugs & AHD_ABORT_LQI_BUG) == 0) 6669 ahd_outb(ahd, LQCTL1, ABORTPENDING); 6670 else 6671 #endif 6672 ahd_outb(ahd, LQCTL1, 0); 6673 6674 /* All of our queues are empty */ 6675 ahd->qoutfifonext = 0; 6676 ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID; 6677 ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID); 6678 for (i = 0; i < AHD_QOUT_SIZE; i++) 6679 ahd->qoutfifo[i].valid_tag = 0; 6680 ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD); 6681 6682 ahd->qinfifonext = 0; 6683 for (i = 0; i < AHD_QIN_SIZE; i++) 6684 ahd->qinfifo[i] = SCB_LIST_NULL; 6685 6686 if ((ahd->features & AHD_TARGETMODE) != 0) { 6687 /* All target command blocks start out invalid. */ 6688 for (i = 0; i < AHD_TMODE_CMDS; i++) 6689 ahd->targetcmds[i].cmd_valid = 0; 6690 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_PREREAD); 6691 ahd->tqinfifonext = 1; 6692 ahd_outb(ahd, KERNEL_TQINPOS, ahd->tqinfifonext - 1); 6693 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext); 6694 } 6695 6696 /* Initialize Scratch Ram. */ 6697 ahd_outb(ahd, SEQ_FLAGS, 0); 6698 ahd_outb(ahd, SEQ_FLAGS2, 0); 6699 6700 /* We don't have any waiting selections */ 6701 ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL); 6702 ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL); 6703 ahd_outw(ahd, MK_MESSAGE_SCB, SCB_LIST_NULL); 6704 ahd_outw(ahd, MK_MESSAGE_SCSIID, 0xFF); 6705 for (i = 0; i < AHD_NUM_TARGETS; i++) 6706 ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL); 6707 6708 /* 6709 * Nobody is waiting to be DMAed into the QOUTFIFO. 6710 */ 6711 ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL); 6712 ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL); 6713 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL); 6714 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL); 6715 ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL); 6716 6717 /* 6718 * The Freeze Count is 0. 6719 */ 6720 ahd->qfreeze_cnt = 0; 6721 ahd_outw(ahd, QFREEZE_COUNT, 0); 6722 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, 0); 6723 6724 /* 6725 * Tell the sequencer where it can find our arrays in memory. 6726 */ 6727 busaddr = ahd->shared_data_map.busaddr; 6728 ahd_outl(ahd, SHARED_DATA_ADDR, busaddr); 6729 ahd_outl(ahd, QOUTFIFO_NEXT_ADDR, busaddr); 6730 6731 /* 6732 * Setup the allowed SCSI Sequences based on operational mode. 6733 * If we are a target, we'll enable select in operations once 6734 * we've had a lun enabled. 6735 */ 6736 scsiseq_template = ENAUTOATNP; 6737 if ((ahd->flags & AHD_INITIATORROLE) != 0) 6738 scsiseq_template |= ENRSELI; 6739 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq_template); 6740 6741 /* There are no busy SCBs yet. */ 6742 for (target = 0; target < AHD_NUM_TARGETS; target++) { 6743 int lun; 6744 6745 for (lun = 0; lun < AHD_NUM_LUNS_NONPKT; lun++) 6746 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(target, 'A', lun)); 6747 } 6748 6749 /* 6750 * Initialize the group code to command length table. 6751 * Vendor Unique codes are set to 0 so we only capture 6752 * the first byte of the cdb. These can be overridden 6753 * when target mode is enabled. 6754 */ 6755 ahd_outb(ahd, CMDSIZE_TABLE, 5); 6756 ahd_outb(ahd, CMDSIZE_TABLE + 1, 9); 6757 ahd_outb(ahd, CMDSIZE_TABLE + 2, 9); 6758 ahd_outb(ahd, CMDSIZE_TABLE + 3, 0); 6759 ahd_outb(ahd, CMDSIZE_TABLE + 4, 15); 6760 ahd_outb(ahd, CMDSIZE_TABLE + 5, 11); 6761 ahd_outb(ahd, CMDSIZE_TABLE + 6, 0); 6762 ahd_outb(ahd, CMDSIZE_TABLE + 7, 0); 6763 6764 /* Tell the sequencer of our initial queue positions */ 6765 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 6766 ahd_outb(ahd, QOFF_CTLSTA, SCB_QSIZE_512); 6767 ahd->qinfifonext = 0; 6768 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 6769 ahd_set_hescb_qoff(ahd, 0); 6770 ahd_set_snscb_qoff(ahd, 0); 6771 ahd_set_sescb_qoff(ahd, 0); 6772 ahd_set_sdscb_qoff(ahd, 0); 6773 6774 /* 6775 * Tell the sequencer which SCB will be the next one it receives. 6776 */ 6777 busaddr = aic_le32toh(ahd->next_queued_hscb->hscb_busaddr); 6778 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 6779 6780 /* 6781 * Default to coalescing disabled. 6782 */ 6783 ahd_outw(ahd, INT_COALESCING_CMDCOUNT, 0); 6784 ahd_outw(ahd, CMDS_PENDING, 0); 6785 ahd_update_coalescing_values(ahd, ahd->int_coalescing_timer, 6786 ahd->int_coalescing_maxcmds, 6787 ahd->int_coalescing_mincmds); 6788 ahd_enable_coalescing(ahd, FALSE); 6789 6790 ahd_loadseq(ahd); 6791 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 6792 } 6793 6794 /* 6795 * Setup default device and controller settings. 6796 * This should only be called if our probe has 6797 * determined that no configuration data is available. 6798 */ 6799 int 6800 ahd_default_config(struct ahd_softc *ahd) 6801 { 6802 int targ; 6803 6804 ahd->our_id = 7; 6805 6806 /* 6807 * Allocate a tstate to house information for our 6808 * initiator presence on the bus as well as the user 6809 * data for any target mode initiator. 6810 */ 6811 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6812 printf("%s: unable to allocate ahd_tmode_tstate. " 6813 "Failing attach\n", ahd_name(ahd)); 6814 AHD_FATAL_ERROR(ahd); 6815 return (ENOMEM); 6816 } 6817 6818 for (targ = 0; targ < AHD_NUM_TARGETS; targ++) { 6819 struct ahd_devinfo devinfo; 6820 struct ahd_initiator_tinfo *tinfo; 6821 struct ahd_tmode_tstate *tstate; 6822 uint16_t target_mask; 6823 6824 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6825 targ, &tstate); 6826 /* 6827 * We support SPC2 and SPI4. 6828 */ 6829 tinfo->user.protocol_version = 4; 6830 tinfo->user.transport_version = 4; 6831 6832 target_mask = 0x01 << targ; 6833 ahd->user_discenable |= target_mask; 6834 tstate->discenable |= target_mask; 6835 ahd->user_tagenable |= target_mask; 6836 #ifdef AHD_FORCE_160 6837 tinfo->user.period = AHD_SYNCRATE_DT; 6838 #else 6839 tinfo->user.period = AHD_SYNCRATE_160; 6840 #endif 6841 tinfo->user.offset = MAX_OFFSET; 6842 tinfo->user.ppr_options = MSG_EXT_PPR_RD_STRM 6843 | MSG_EXT_PPR_WR_FLOW 6844 | MSG_EXT_PPR_HOLD_MCS 6845 | MSG_EXT_PPR_IU_REQ 6846 | MSG_EXT_PPR_QAS_REQ 6847 | MSG_EXT_PPR_DT_REQ; 6848 if ((ahd->features & AHD_RTI) != 0) 6849 tinfo->user.ppr_options |= MSG_EXT_PPR_RTI; 6850 6851 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT; 6852 6853 /* 6854 * Start out Async/Narrow/Untagged and with 6855 * conservative protocol support. 6856 */ 6857 tinfo->goal.protocol_version = 2; 6858 tinfo->goal.transport_version = 2; 6859 tinfo->curr.protocol_version = 2; 6860 tinfo->curr.transport_version = 2; 6861 ahd_compile_devinfo(&devinfo, ahd->our_id, 6862 targ, CAM_LUN_WILDCARD, 6863 'A', ROLE_INITIATOR); 6864 tstate->tagenable &= ~target_mask; 6865 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6866 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 6867 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 6868 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 6869 /*paused*/TRUE); 6870 } 6871 return (0); 6872 } 6873 6874 /* 6875 * Parse device configuration information. 6876 */ 6877 int 6878 ahd_parse_cfgdata(struct ahd_softc *ahd, struct seeprom_config *sc) 6879 { 6880 int targ; 6881 int max_targ; 6882 6883 max_targ = sc->max_targets & CFMAXTARG; 6884 ahd->our_id = sc->brtime_id & CFSCSIID; 6885 6886 /* 6887 * Allocate a tstate to house information for our 6888 * initiator presence on the bus as well as the user 6889 * data for any target mode initiator. 6890 */ 6891 if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) { 6892 printf("%s: unable to allocate ahd_tmode_tstate. " 6893 "Failing attach\n", ahd_name(ahd)); 6894 AHD_FATAL_ERROR(ahd); 6895 return (ENOMEM); 6896 } 6897 6898 for (targ = 0; targ < max_targ; targ++) { 6899 struct ahd_devinfo devinfo; 6900 struct ahd_initiator_tinfo *tinfo; 6901 struct ahd_transinfo *user_tinfo; 6902 struct ahd_tmode_tstate *tstate; 6903 uint16_t target_mask; 6904 6905 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, 6906 targ, &tstate); 6907 user_tinfo = &tinfo->user; 6908 6909 /* 6910 * We support SPC2 and SPI4. 6911 */ 6912 tinfo->user.protocol_version = 4; 6913 tinfo->user.transport_version = 4; 6914 6915 target_mask = 0x01 << targ; 6916 ahd->user_discenable &= ~target_mask; 6917 tstate->discenable &= ~target_mask; 6918 ahd->user_tagenable &= ~target_mask; 6919 if (sc->device_flags[targ] & CFDISC) { 6920 tstate->discenable |= target_mask; 6921 ahd->user_discenable |= target_mask; 6922 ahd->user_tagenable |= target_mask; 6923 } else { 6924 /* 6925 * Cannot be packetized without disconnection. 6926 */ 6927 sc->device_flags[targ] &= ~CFPACKETIZED; 6928 } 6929 6930 user_tinfo->ppr_options = 0; 6931 user_tinfo->period = (sc->device_flags[targ] & CFXFER); 6932 if (user_tinfo->period < CFXFER_ASYNC) { 6933 if (user_tinfo->period <= AHD_PERIOD_10MHz) 6934 user_tinfo->ppr_options |= MSG_EXT_PPR_DT_REQ; 6935 user_tinfo->offset = MAX_OFFSET; 6936 } else { 6937 user_tinfo->offset = 0; 6938 user_tinfo->period = AHD_ASYNC_XFER_PERIOD; 6939 } 6940 #ifdef AHD_FORCE_160 6941 if (user_tinfo->period <= AHD_SYNCRATE_160) 6942 user_tinfo->period = AHD_SYNCRATE_DT; 6943 #endif 6944 6945 if ((sc->device_flags[targ] & CFPACKETIZED) != 0) { 6946 user_tinfo->ppr_options |= MSG_EXT_PPR_RD_STRM 6947 | MSG_EXT_PPR_WR_FLOW 6948 | MSG_EXT_PPR_HOLD_MCS 6949 | MSG_EXT_PPR_IU_REQ; 6950 if ((ahd->features & AHD_RTI) != 0) 6951 user_tinfo->ppr_options |= MSG_EXT_PPR_RTI; 6952 } 6953 6954 if ((sc->device_flags[targ] & CFQAS) != 0) 6955 user_tinfo->ppr_options |= MSG_EXT_PPR_QAS_REQ; 6956 6957 if ((sc->device_flags[targ] & CFWIDEB) != 0) 6958 user_tinfo->width = MSG_EXT_WDTR_BUS_16_BIT; 6959 else 6960 user_tinfo->width = MSG_EXT_WDTR_BUS_8_BIT; 6961 #ifdef AHD_DEBUG 6962 if ((ahd_debug & AHD_SHOW_MISC) != 0) 6963 printf("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width, 6964 user_tinfo->period, user_tinfo->offset, 6965 user_tinfo->ppr_options); 6966 #endif 6967 /* 6968 * Start out Async/Narrow/Untagged and with 6969 * conservative protocol support. 6970 */ 6971 tstate->tagenable &= ~target_mask; 6972 tinfo->goal.protocol_version = 2; 6973 tinfo->goal.transport_version = 2; 6974 tinfo->curr.protocol_version = 2; 6975 tinfo->curr.transport_version = 2; 6976 ahd_compile_devinfo(&devinfo, ahd->our_id, 6977 targ, CAM_LUN_WILDCARD, 6978 'A', ROLE_INITIATOR); 6979 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6980 AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE); 6981 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0, 6982 /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL, 6983 /*paused*/TRUE); 6984 } 6985 6986 ahd->flags &= ~AHD_SPCHK_ENB_A; 6987 if (sc->bios_control & CFSPARITY) 6988 ahd->flags |= AHD_SPCHK_ENB_A; 6989 6990 ahd->flags &= ~AHD_RESET_BUS_A; 6991 if (sc->bios_control & CFRESETB) 6992 ahd->flags |= AHD_RESET_BUS_A; 6993 6994 ahd->flags &= ~AHD_EXTENDED_TRANS_A; 6995 if (sc->bios_control & CFEXTEND) 6996 ahd->flags |= AHD_EXTENDED_TRANS_A; 6997 6998 ahd->flags &= ~AHD_BIOS_ENABLED; 6999 if ((sc->bios_control & CFBIOSSTATE) == CFBS_ENABLED) 7000 ahd->flags |= AHD_BIOS_ENABLED; 7001 7002 ahd->flags &= ~AHD_STPWLEVEL_A; 7003 if ((sc->adapter_control & CFSTPWLEVEL) != 0) 7004 ahd->flags |= AHD_STPWLEVEL_A; 7005 7006 return (0); 7007 } 7008 7009 /* 7010 * Parse device configuration information. 7011 */ 7012 int 7013 ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd) 7014 { 7015 int error; 7016 7017 error = ahd_verify_vpd_cksum(vpd); 7018 if (error == 0) 7019 return (EINVAL); 7020 if ((vpd->bios_flags & VPDBOOTHOST) != 0) 7021 ahd->flags |= AHD_BOOT_CHANNEL; 7022 return (0); 7023 } 7024 7025 void 7026 ahd_intr_enable(struct ahd_softc *ahd, int enable) 7027 { 7028 u_int hcntrl; 7029 7030 hcntrl = ahd_inb(ahd, HCNTRL); 7031 hcntrl &= ~INTEN; 7032 ahd->pause &= ~INTEN; 7033 ahd->unpause &= ~INTEN; 7034 if (enable) { 7035 hcntrl |= INTEN; 7036 ahd->pause |= INTEN; 7037 ahd->unpause |= INTEN; 7038 } 7039 ahd_outb(ahd, HCNTRL, hcntrl); 7040 } 7041 7042 void 7043 ahd_update_coalescing_values(struct ahd_softc *ahd, u_int timer, u_int maxcmds, 7044 u_int mincmds) 7045 { 7046 if (timer > AHD_TIMER_MAX_US) 7047 timer = AHD_TIMER_MAX_US; 7048 ahd->int_coalescing_timer = timer; 7049 7050 if (maxcmds > AHD_INT_COALESCING_MAXCMDS_MAX) 7051 maxcmds = AHD_INT_COALESCING_MAXCMDS_MAX; 7052 if (mincmds > AHD_INT_COALESCING_MINCMDS_MAX) 7053 mincmds = AHD_INT_COALESCING_MINCMDS_MAX; 7054 ahd->int_coalescing_maxcmds = maxcmds; 7055 ahd_outw(ahd, INT_COALESCING_TIMER, timer / AHD_TIMER_US_PER_TICK); 7056 ahd_outb(ahd, INT_COALESCING_MAXCMDS, -maxcmds); 7057 ahd_outb(ahd, INT_COALESCING_MINCMDS, -mincmds); 7058 } 7059 7060 void 7061 ahd_enable_coalescing(struct ahd_softc *ahd, int enable) 7062 { 7063 7064 ahd->hs_mailbox &= ~ENINT_COALESCE; 7065 if (enable) 7066 ahd->hs_mailbox |= ENINT_COALESCE; 7067 ahd_outb(ahd, HS_MAILBOX, ahd->hs_mailbox); 7068 ahd_flush_device_writes(ahd); 7069 ahd_run_qoutfifo(ahd); 7070 } 7071 7072 /* 7073 * Ensure that the card is paused in a location 7074 * outside of all critical sections and that all 7075 * pending work is completed prior to returning. 7076 * This routine should only be called from outside 7077 * an interrupt context. 7078 */ 7079 void 7080 ahd_pause_and_flushwork(struct ahd_softc *ahd) 7081 { 7082 u_int intstat; 7083 u_int maxloops; 7084 7085 maxloops = 1000; 7086 ahd->flags |= AHD_ALL_INTERRUPTS; 7087 ahd_pause(ahd); 7088 /* 7089 * Freeze the outgoing selections. We do this only 7090 * until we are safely paused without further selections 7091 * pending. 7092 */ 7093 ahd->qfreeze_cnt--; 7094 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 7095 ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN); 7096 do { 7097 ahd_unpause(ahd); 7098 /* 7099 * Give the sequencer some time to service 7100 * any active selections. 7101 */ 7102 aic_delay(500); 7103 7104 ahd_intr(ahd); 7105 ahd_pause(ahd); 7106 intstat = ahd_inb(ahd, INTSTAT); 7107 if ((intstat & INT_PEND) == 0) { 7108 ahd_clear_critical_section(ahd); 7109 intstat = ahd_inb(ahd, INTSTAT); 7110 } 7111 } while (--maxloops 7112 && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0) 7113 && ((intstat & INT_PEND) != 0 7114 || (ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0 7115 || (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0)); 7116 7117 if (maxloops == 0) { 7118 printf("Infinite interrupt loop, INTSTAT = %x", 7119 ahd_inb(ahd, INTSTAT)); 7120 AHD_FATAL_ERROR(ahd); 7121 } 7122 ahd->qfreeze_cnt++; 7123 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 7124 7125 ahd_flush_qoutfifo(ahd); 7126 7127 ahd_platform_flushwork(ahd); 7128 ahd->flags &= ~AHD_ALL_INTERRUPTS; 7129 } 7130 7131 int 7132 ahd_suspend(struct ahd_softc *ahd) 7133 { 7134 7135 ahd_pause_and_flushwork(ahd); 7136 7137 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 7138 ahd_unpause(ahd); 7139 return (EBUSY); 7140 } 7141 ahd_shutdown(ahd); 7142 return (0); 7143 } 7144 7145 int 7146 ahd_resume(struct ahd_softc *ahd) 7147 { 7148 7149 ahd_reset(ahd, /*reinit*/TRUE); 7150 ahd_intr_enable(ahd, TRUE); 7151 ahd_restart(ahd); 7152 return (0); 7153 } 7154 7155 /************************** Busy Target Table *********************************/ 7156 /* 7157 * Set SCBPTR to the SCB that contains the busy 7158 * table entry for TCL. Return the offset into 7159 * the SCB that contains the entry for TCL. 7160 * saved_scbid is dereferenced and set to the 7161 * scbid that should be restored once manipualtion 7162 * of the TCL entry is complete. 7163 */ 7164 static __inline u_int 7165 ahd_index_busy_tcl(struct ahd_softc *ahd, u_int *saved_scbid, u_int tcl) 7166 { 7167 /* 7168 * Index to the SCB that contains the busy entry. 7169 */ 7170 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7171 *saved_scbid = ahd_get_scbptr(ahd); 7172 ahd_set_scbptr(ahd, TCL_LUN(tcl) 7173 | ((TCL_TARGET_OFFSET(tcl) & 0xC) << 4)); 7174 7175 /* 7176 * And now calculate the SCB offset to the entry. 7177 * Each entry is 2 bytes wide, hence the 7178 * multiplication by 2. 7179 */ 7180 return (((TCL_TARGET_OFFSET(tcl) & 0x3) << 1) + SCB_DISCONNECTED_LISTS); 7181 } 7182 7183 /* 7184 * Return the untagged transaction id for a given target/channel lun. 7185 */ 7186 u_int 7187 ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl) 7188 { 7189 u_int scbid; 7190 u_int scb_offset; 7191 u_int saved_scbptr; 7192 7193 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 7194 scbid = ahd_inw_scbram(ahd, scb_offset); 7195 ahd_set_scbptr(ahd, saved_scbptr); 7196 return (scbid); 7197 } 7198 7199 void 7200 ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid) 7201 { 7202 u_int scb_offset; 7203 u_int saved_scbptr; 7204 7205 scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl); 7206 ahd_outw(ahd, scb_offset, scbid); 7207 ahd_set_scbptr(ahd, saved_scbptr); 7208 } 7209 7210 /************************** SCB and SCB queue management **********************/ 7211 int 7212 ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target, 7213 char channel, int lun, u_int tag, role_t role) 7214 { 7215 int targ = SCB_GET_TARGET(ahd, scb); 7216 char chan = SCB_GET_CHANNEL(ahd, scb); 7217 int slun = SCB_GET_LUN(scb); 7218 int match; 7219 7220 match = ((chan == channel) || (channel == ALL_CHANNELS)); 7221 if (match != 0) 7222 match = ((targ == target) || (target == CAM_TARGET_WILDCARD)); 7223 if (match != 0) 7224 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD)); 7225 if (match != 0) { 7226 #ifdef AHD_TARGET_MODE 7227 int group; 7228 7229 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code); 7230 if (role == ROLE_INITIATOR) { 7231 match = (group != XPT_FC_GROUP_TMODE) 7232 && ((tag == SCB_GET_TAG(scb)) 7233 || (tag == SCB_LIST_NULL)); 7234 } else if (role == ROLE_TARGET) { 7235 match = (group == XPT_FC_GROUP_TMODE) 7236 && ((tag == scb->io_ctx->csio.tag_id) 7237 || (tag == SCB_LIST_NULL)); 7238 } 7239 #else /* !AHD_TARGET_MODE */ 7240 match = ((tag == SCB_GET_TAG(scb)) || (tag == SCB_LIST_NULL)); 7241 #endif /* AHD_TARGET_MODE */ 7242 } 7243 7244 return match; 7245 } 7246 7247 void 7248 ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb) 7249 { 7250 int target; 7251 char channel; 7252 int lun; 7253 7254 target = SCB_GET_TARGET(ahd, scb); 7255 lun = SCB_GET_LUN(scb); 7256 channel = SCB_GET_CHANNEL(ahd, scb); 7257 7258 ahd_search_qinfifo(ahd, target, channel, lun, 7259 /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN, 7260 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7261 7262 ahd_platform_freeze_devq(ahd, scb); 7263 } 7264 7265 void 7266 ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, struct scb *scb) 7267 { 7268 struct scb *prev_scb; 7269 ahd_mode_state saved_modes; 7270 7271 saved_modes = ahd_save_modes(ahd); 7272 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7273 prev_scb = NULL; 7274 if (ahd_qinfifo_count(ahd) != 0) { 7275 u_int prev_tag; 7276 u_int prev_pos; 7277 7278 prev_pos = AHD_QIN_WRAP(ahd->qinfifonext - 1); 7279 prev_tag = ahd->qinfifo[prev_pos]; 7280 prev_scb = ahd_lookup_scb(ahd, prev_tag); 7281 } 7282 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7283 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7284 ahd_restore_modes(ahd, saved_modes); 7285 } 7286 7287 static void 7288 ahd_qinfifo_requeue(struct ahd_softc *ahd, struct scb *prev_scb, 7289 struct scb *scb) 7290 { 7291 if (prev_scb == NULL) { 7292 uint32_t busaddr; 7293 7294 busaddr = aic_le32toh(scb->hscb->hscb_busaddr); 7295 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 7296 } else { 7297 prev_scb->hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr; 7298 ahd_sync_scb(ahd, prev_scb, 7299 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7300 } 7301 ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb); 7302 ahd->qinfifonext++; 7303 scb->hscb->next_hscb_busaddr = ahd->next_queued_hscb->hscb_busaddr; 7304 ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 7305 } 7306 7307 static int 7308 ahd_qinfifo_count(struct ahd_softc *ahd) 7309 { 7310 u_int qinpos; 7311 u_int wrap_qinpos; 7312 u_int wrap_qinfifonext; 7313 7314 AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK); 7315 qinpos = ahd_get_snscb_qoff(ahd); 7316 wrap_qinpos = AHD_QIN_WRAP(qinpos); 7317 wrap_qinfifonext = AHD_QIN_WRAP(ahd->qinfifonext); 7318 if (wrap_qinfifonext >= wrap_qinpos) 7319 return (wrap_qinfifonext - wrap_qinpos); 7320 else 7321 return (wrap_qinfifonext 7322 + NUM_ELEMENTS(ahd->qinfifo) - wrap_qinpos); 7323 } 7324 7325 void 7326 ahd_reset_cmds_pending(struct ahd_softc *ahd) 7327 { 7328 struct scb *scb; 7329 ahd_mode_state saved_modes; 7330 u_int pending_cmds; 7331 7332 saved_modes = ahd_save_modes(ahd); 7333 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7334 7335 /* 7336 * Don't count any commands as outstanding that the 7337 * sequencer has already marked for completion. 7338 */ 7339 ahd_flush_qoutfifo(ahd); 7340 7341 pending_cmds = 0; 7342 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 7343 pending_cmds++; 7344 } 7345 ahd_outw(ahd, CMDS_PENDING, pending_cmds - ahd_qinfifo_count(ahd)); 7346 ahd_restore_modes(ahd, saved_modes); 7347 ahd->flags &= ~AHD_UPDATE_PEND_CMDS; 7348 } 7349 7350 void 7351 ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status) 7352 { 7353 cam_status ostat; 7354 cam_status cstat; 7355 7356 ostat = aic_get_transaction_status(scb); 7357 if (ostat == CAM_REQ_INPROG) 7358 aic_set_transaction_status(scb, status); 7359 cstat = aic_get_transaction_status(scb); 7360 if (cstat != CAM_REQ_CMP) 7361 aic_freeze_scb(scb); 7362 ahd_done(ahd, scb); 7363 } 7364 7365 int 7366 ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel, 7367 int lun, u_int tag, role_t role, uint32_t status, 7368 ahd_search_action action) 7369 { 7370 struct scb *scb; 7371 struct scb *mk_msg_scb; 7372 struct scb *prev_scb; 7373 ahd_mode_state saved_modes; 7374 u_int qinstart; 7375 u_int qinpos; 7376 u_int qintail; 7377 u_int tid_next; 7378 u_int tid_prev; 7379 u_int scbid; 7380 u_int seq_flags2; 7381 u_int savedscbptr; 7382 uint32_t busaddr; 7383 int found; 7384 int targets; 7385 7386 /* Must be in CCHAN mode */ 7387 saved_modes = ahd_save_modes(ahd); 7388 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 7389 7390 /* 7391 * Halt any pending SCB DMA. The sequencer will reinitiate 7392 * this dma if the qinfifo is not empty once we unpause. 7393 */ 7394 if ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN|CCSCBDIR)) 7395 == (CCARREN|CCSCBEN|CCSCBDIR)) { 7396 ahd_outb(ahd, CCSCBCTL, 7397 ahd_inb(ahd, CCSCBCTL) & ~(CCARREN|CCSCBEN)); 7398 while ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN)) != 0) 7399 ; 7400 } 7401 /* Determine sequencer's position in the qinfifo. */ 7402 qintail = AHD_QIN_WRAP(ahd->qinfifonext); 7403 qinstart = ahd_get_snscb_qoff(ahd); 7404 qinpos = AHD_QIN_WRAP(qinstart); 7405 found = 0; 7406 prev_scb = NULL; 7407 7408 if (action == SEARCH_PRINT) { 7409 printf("qinstart = %d qinfifonext = %d\nQINFIFO:", 7410 qinstart, ahd->qinfifonext); 7411 } 7412 7413 /* 7414 * Start with an empty queue. Entries that are not chosen 7415 * for removal will be re-added to the queue as we go. 7416 */ 7417 ahd->qinfifonext = qinstart; 7418 busaddr = aic_le32toh(ahd->next_queued_hscb->hscb_busaddr); 7419 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr); 7420 7421 while (qinpos != qintail) { 7422 scb = ahd_lookup_scb(ahd, ahd->qinfifo[qinpos]); 7423 if (scb == NULL) { 7424 printf("qinpos = %d, SCB index = %d\n", 7425 qinpos, ahd->qinfifo[qinpos]); 7426 AHD_FATAL_ERROR(ahd); 7427 panic("Loop 1\n"); 7428 } 7429 7430 if (ahd_match_scb(ahd, scb, target, channel, lun, tag, role)) { 7431 /* 7432 * We found an scb that needs to be acted on. 7433 */ 7434 found++; 7435 switch (action) { 7436 case SEARCH_COMPLETE: 7437 if ((scb->flags & SCB_ACTIVE) == 0) 7438 printf("Inactive SCB in qinfifo\n"); 7439 ahd_done_with_status(ahd, scb, status); 7440 /* FALLTHROUGH */ 7441 case SEARCH_REMOVE: 7442 break; 7443 case SEARCH_PRINT: 7444 printf(" 0x%x", ahd->qinfifo[qinpos]); 7445 /* FALLTHROUGH */ 7446 case SEARCH_COUNT: 7447 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7448 prev_scb = scb; 7449 break; 7450 } 7451 } else { 7452 ahd_qinfifo_requeue(ahd, prev_scb, scb); 7453 prev_scb = scb; 7454 } 7455 qinpos = AHD_QIN_WRAP(qinpos+1); 7456 } 7457 7458 ahd_set_hnscb_qoff(ahd, ahd->qinfifonext); 7459 7460 if (action == SEARCH_PRINT) 7461 printf("\nWAITING_TID_QUEUES:\n"); 7462 7463 /* 7464 * Search waiting for selection lists. We traverse the 7465 * list of "their ids" waiting for selection and, if 7466 * appropriate, traverse the SCBs of each "their id" 7467 * looking for matches. 7468 */ 7469 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7470 seq_flags2 = ahd_inb(ahd, SEQ_FLAGS2); 7471 if ((seq_flags2 & PENDING_MK_MESSAGE) != 0) { 7472 scbid = ahd_inw(ahd, MK_MESSAGE_SCB); 7473 mk_msg_scb = ahd_lookup_scb(ahd, scbid); 7474 } else 7475 mk_msg_scb = NULL; 7476 savedscbptr = ahd_get_scbptr(ahd); 7477 tid_next = ahd_inw(ahd, WAITING_TID_HEAD); 7478 tid_prev = SCB_LIST_NULL; 7479 targets = 0; 7480 for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) { 7481 u_int tid_head; 7482 u_int tid_tail; 7483 7484 targets++; 7485 if (targets > AHD_NUM_TARGETS) 7486 panic("TID LIST LOOP"); 7487 7488 if (scbid >= ahd->scb_data.numscbs) { 7489 printf("%s: Waiting TID List inconsistency. " 7490 "SCB index == 0x%x, yet numscbs == 0x%x.", 7491 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7492 ahd_dump_card_state(ahd); 7493 panic("for safety"); 7494 } 7495 scb = ahd_lookup_scb(ahd, scbid); 7496 if (scb == NULL) { 7497 printf("%s: SCB = 0x%x Not Active!\n", 7498 ahd_name(ahd), scbid); 7499 panic("Waiting TID List traversal\n"); 7500 } 7501 ahd_set_scbptr(ahd, scbid); 7502 tid_next = ahd_inw_scbram(ahd, SCB_NEXT2); 7503 if (ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 7504 SCB_LIST_NULL, ROLE_UNKNOWN) == 0) { 7505 tid_prev = scbid; 7506 continue; 7507 } 7508 7509 /* 7510 * We found a list of scbs that needs to be searched. 7511 */ 7512 if (action == SEARCH_PRINT) 7513 printf(" %d ( ", SCB_GET_TARGET(ahd, scb)); 7514 tid_head = scbid; 7515 found += ahd_search_scb_list(ahd, target, channel, 7516 lun, tag, role, status, 7517 action, &tid_head, &tid_tail, 7518 SCB_GET_TARGET(ahd, scb)); 7519 /* 7520 * Check any MK_MESSAGE SCB that is still waiting to 7521 * enter this target's waiting for selection queue. 7522 */ 7523 if (mk_msg_scb != NULL 7524 && ahd_match_scb(ahd, mk_msg_scb, target, channel, 7525 lun, tag, role)) { 7526 /* 7527 * We found an scb that needs to be acted on. 7528 */ 7529 found++; 7530 switch (action) { 7531 case SEARCH_COMPLETE: 7532 if ((mk_msg_scb->flags & SCB_ACTIVE) == 0) 7533 printf("Inactive SCB pending MK_MSG\n"); 7534 ahd_done_with_status(ahd, mk_msg_scb, status); 7535 /* FALLTHROUGH */ 7536 case SEARCH_REMOVE: 7537 { 7538 u_int tail_offset; 7539 7540 printf("Removing MK_MSG scb\n"); 7541 7542 /* 7543 * Reset our tail to the tail of the 7544 * main per-target list. 7545 */ 7546 tail_offset = WAITING_SCB_TAILS 7547 + (2 * SCB_GET_TARGET(ahd, mk_msg_scb)); 7548 ahd_outw(ahd, tail_offset, tid_tail); 7549 7550 seq_flags2 &= ~PENDING_MK_MESSAGE; 7551 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2); 7552 ahd_outw(ahd, CMDS_PENDING, 7553 ahd_inw(ahd, CMDS_PENDING)-1); 7554 mk_msg_scb = NULL; 7555 break; 7556 } 7557 case SEARCH_PRINT: 7558 printf(" 0x%x", SCB_GET_TAG(scb)); 7559 /* FALLTHROUGH */ 7560 case SEARCH_COUNT: 7561 break; 7562 } 7563 } 7564 7565 if (mk_msg_scb != NULL 7566 && SCBID_IS_NULL(tid_head) 7567 && ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD, 7568 SCB_LIST_NULL, ROLE_UNKNOWN)) { 7569 /* 7570 * When removing the last SCB for a target 7571 * queue with a pending MK_MESSAGE scb, we 7572 * must queue the MK_MESSAGE scb. 7573 */ 7574 printf("Queueing mk_msg_scb\n"); 7575 tid_head = ahd_inw(ahd, MK_MESSAGE_SCB); 7576 seq_flags2 &= ~PENDING_MK_MESSAGE; 7577 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2); 7578 mk_msg_scb = NULL; 7579 } 7580 if (tid_head != scbid) 7581 ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next); 7582 if (!SCBID_IS_NULL(tid_head)) 7583 tid_prev = tid_head; 7584 if (action == SEARCH_PRINT) 7585 printf(")\n"); 7586 } 7587 7588 /* Restore saved state. */ 7589 ahd_set_scbptr(ahd, savedscbptr); 7590 ahd_restore_modes(ahd, saved_modes); 7591 return (found); 7592 } 7593 7594 static int 7595 ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel, 7596 int lun, u_int tag, role_t role, uint32_t status, 7597 ahd_search_action action, u_int *list_head, 7598 u_int *list_tail, u_int tid) 7599 { 7600 struct scb *scb; 7601 u_int scbid; 7602 u_int next; 7603 u_int prev; 7604 int found; 7605 7606 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7607 found = 0; 7608 prev = SCB_LIST_NULL; 7609 next = *list_head; 7610 *list_tail = SCB_LIST_NULL; 7611 for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) { 7612 if (scbid >= ahd->scb_data.numscbs) { 7613 printf("%s:SCB List inconsistency. " 7614 "SCB == 0x%x, yet numscbs == 0x%x.", 7615 ahd_name(ahd), scbid, ahd->scb_data.numscbs); 7616 ahd_dump_card_state(ahd); 7617 panic("for safety"); 7618 } 7619 scb = ahd_lookup_scb(ahd, scbid); 7620 if (scb == NULL) { 7621 printf("%s: SCB = %d Not Active!\n", 7622 ahd_name(ahd), scbid); 7623 panic("Waiting List traversal\n"); 7624 } 7625 ahd_set_scbptr(ahd, scbid); 7626 *list_tail = scbid; 7627 next = ahd_inw_scbram(ahd, SCB_NEXT); 7628 if (ahd_match_scb(ahd, scb, target, channel, 7629 lun, SCB_LIST_NULL, role) == 0) { 7630 prev = scbid; 7631 continue; 7632 } 7633 found++; 7634 switch (action) { 7635 case SEARCH_COMPLETE: 7636 if ((scb->flags & SCB_ACTIVE) == 0) 7637 printf("Inactive SCB in Waiting List\n"); 7638 ahd_done_with_status(ahd, scb, status); 7639 /* FALLTHROUGH */ 7640 case SEARCH_REMOVE: 7641 ahd_rem_wscb(ahd, scbid, prev, next, tid); 7642 *list_tail = prev; 7643 if (SCBID_IS_NULL(prev)) 7644 *list_head = next; 7645 break; 7646 case SEARCH_PRINT: 7647 printf("0x%x ", scbid); 7648 case SEARCH_COUNT: 7649 prev = scbid; 7650 break; 7651 } 7652 if (found > AHD_SCB_MAX) 7653 panic("SCB LIST LOOP"); 7654 } 7655 if (action == SEARCH_COMPLETE 7656 || action == SEARCH_REMOVE) 7657 ahd_outw(ahd, CMDS_PENDING, ahd_inw(ahd, CMDS_PENDING) - found); 7658 return (found); 7659 } 7660 7661 static void 7662 ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev, 7663 u_int tid_cur, u_int tid_next) 7664 { 7665 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7666 7667 if (SCBID_IS_NULL(tid_cur)) { 7668 /* Bypass current TID list */ 7669 if (SCBID_IS_NULL(tid_prev)) { 7670 ahd_outw(ahd, WAITING_TID_HEAD, tid_next); 7671 } else { 7672 ahd_set_scbptr(ahd, tid_prev); 7673 ahd_outw(ahd, SCB_NEXT2, tid_next); 7674 } 7675 if (SCBID_IS_NULL(tid_next)) 7676 ahd_outw(ahd, WAITING_TID_TAIL, tid_prev); 7677 } else { 7678 /* Stitch through tid_cur */ 7679 if (SCBID_IS_NULL(tid_prev)) { 7680 ahd_outw(ahd, WAITING_TID_HEAD, tid_cur); 7681 } else { 7682 ahd_set_scbptr(ahd, tid_prev); 7683 ahd_outw(ahd, SCB_NEXT2, tid_cur); 7684 } 7685 ahd_set_scbptr(ahd, tid_cur); 7686 ahd_outw(ahd, SCB_NEXT2, tid_next); 7687 7688 if (SCBID_IS_NULL(tid_next)) 7689 ahd_outw(ahd, WAITING_TID_TAIL, tid_cur); 7690 } 7691 } 7692 7693 /* 7694 * Manipulate the waiting for selection list and return the 7695 * scb that follows the one that we remove. 7696 */ 7697 static u_int 7698 ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid, 7699 u_int prev, u_int next, u_int tid) 7700 { 7701 u_int tail_offset; 7702 7703 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7704 if (!SCBID_IS_NULL(prev)) { 7705 ahd_set_scbptr(ahd, prev); 7706 ahd_outw(ahd, SCB_NEXT, next); 7707 } 7708 7709 /* 7710 * SCBs that have MK_MESSAGE set in them may 7711 * cause the tail pointer to be updated without 7712 * setting the next pointer of the previous tail. 7713 * Only clear the tail if the removed SCB was 7714 * the tail. 7715 */ 7716 tail_offset = WAITING_SCB_TAILS + (2 * tid); 7717 if (SCBID_IS_NULL(next) 7718 && ahd_inw(ahd, tail_offset) == scbid) 7719 ahd_outw(ahd, tail_offset, prev); 7720 7721 ahd_add_scb_to_free_list(ahd, scbid); 7722 return (next); 7723 } 7724 7725 /* 7726 * Add the SCB as selected by SCBPTR onto the on chip list of 7727 * free hardware SCBs. This list is empty/unused if we are not 7728 * performing SCB paging. 7729 */ 7730 static void 7731 ahd_add_scb_to_free_list(struct ahd_softc *ahd, u_int scbid) 7732 { 7733 /* XXX Need some other mechanism to designate "free". */ 7734 /* 7735 * Invalidate the tag so that our abort 7736 * routines don't think it's active. 7737 ahd_outb(ahd, SCB_TAG, SCB_LIST_NULL); 7738 */ 7739 } 7740 7741 /******************************** Error Handling ******************************/ 7742 /* 7743 * Abort all SCBs that match the given description (target/channel/lun/tag), 7744 * setting their status to the passed in status if the status has not already 7745 * been modified from CAM_REQ_INPROG. This routine assumes that the sequencer 7746 * is paused before it is called. 7747 */ 7748 int 7749 ahd_abort_scbs(struct ahd_softc *ahd, int target, char channel, 7750 int lun, u_int tag, role_t role, uint32_t status) 7751 { 7752 struct scb *scbp; 7753 struct scb *scbp_next; 7754 u_int i, j; 7755 u_int maxtarget; 7756 u_int minlun; 7757 u_int maxlun; 7758 int found; 7759 ahd_mode_state saved_modes; 7760 7761 /* restore this when we're done */ 7762 saved_modes = ahd_save_modes(ahd); 7763 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7764 7765 found = ahd_search_qinfifo(ahd, target, channel, lun, SCB_LIST_NULL, 7766 role, CAM_REQUEUE_REQ, SEARCH_COMPLETE); 7767 7768 /* 7769 * Clean out the busy target table for any untagged commands. 7770 */ 7771 i = 0; 7772 maxtarget = 16; 7773 if (target != CAM_TARGET_WILDCARD) { 7774 i = target; 7775 if (channel == 'B') 7776 i += 8; 7777 maxtarget = i + 1; 7778 } 7779 7780 if (lun == CAM_LUN_WILDCARD) { 7781 minlun = 0; 7782 maxlun = AHD_NUM_LUNS_NONPKT; 7783 } else if (lun >= AHD_NUM_LUNS_NONPKT) { 7784 minlun = maxlun = 0; 7785 } else { 7786 minlun = lun; 7787 maxlun = lun + 1; 7788 } 7789 7790 if (role != ROLE_TARGET) { 7791 for (;i < maxtarget; i++) { 7792 for (j = minlun;j < maxlun; j++) { 7793 u_int scbid; 7794 u_int tcl; 7795 7796 tcl = BUILD_TCL_RAW(i, 'A', j); 7797 scbid = ahd_find_busy_tcl(ahd, tcl); 7798 scbp = ahd_lookup_scb(ahd, scbid); 7799 if (scbp == NULL 7800 || ahd_match_scb(ahd, scbp, target, channel, 7801 lun, tag, role) == 0) 7802 continue; 7803 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(i, 'A', j)); 7804 } 7805 } 7806 } 7807 7808 /* 7809 * Don't abort commands that have already completed, 7810 * but haven't quite made it up to the host yet. 7811 */ 7812 ahd_flush_qoutfifo(ahd); 7813 7814 /* 7815 * Go through the pending CCB list and look for 7816 * commands for this target that are still active. 7817 * These are other tagged commands that were 7818 * disconnected when the reset occurred. 7819 */ 7820 scbp_next = LIST_FIRST(&ahd->pending_scbs); 7821 while (scbp_next != NULL) { 7822 scbp = scbp_next; 7823 scbp_next = LIST_NEXT(scbp, pending_links); 7824 if (ahd_match_scb(ahd, scbp, target, channel, lun, tag, role)) { 7825 cam_status ostat; 7826 7827 ostat = aic_get_transaction_status(scbp); 7828 if (ostat == CAM_REQ_INPROG) 7829 aic_set_transaction_status(scbp, status); 7830 if (aic_get_transaction_status(scbp) != CAM_REQ_CMP) 7831 aic_freeze_scb(scbp); 7832 if ((scbp->flags & SCB_ACTIVE) == 0) 7833 printf("Inactive SCB on pending list\n"); 7834 ahd_done(ahd, scbp); 7835 found++; 7836 } 7837 } 7838 ahd_restore_modes(ahd, saved_modes); 7839 ahd_platform_abort_scbs(ahd, target, channel, lun, tag, role, status); 7840 ahd->flags |= AHD_UPDATE_PEND_CMDS; 7841 return found; 7842 } 7843 7844 static void 7845 ahd_reset_current_bus(struct ahd_softc *ahd) 7846 { 7847 uint8_t scsiseq; 7848 7849 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7850 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) & ~ENSCSIRST); 7851 scsiseq = ahd_inb(ahd, SCSISEQ0) & ~(ENSELO|ENARBO|SCSIRSTO); 7852 ahd_outb(ahd, SCSISEQ0, scsiseq | SCSIRSTO); 7853 ahd_flush_device_writes(ahd); 7854 aic_delay(AHD_BUSRESET_DELAY); 7855 /* Turn off the bus reset */ 7856 ahd_outb(ahd, SCSISEQ0, scsiseq); 7857 ahd_flush_device_writes(ahd); 7858 aic_delay(AHD_BUSRESET_DELAY); 7859 if ((ahd->bugs & AHD_SCSIRST_BUG) != 0) { 7860 /* 7861 * 2A Razor #474 7862 * Certain chip state is not cleared for 7863 * SCSI bus resets that we initiate, so 7864 * we must reset the chip. 7865 */ 7866 ahd_reset(ahd, /*reinit*/TRUE); 7867 ahd_intr_enable(ahd, /*enable*/TRUE); 7868 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 7869 } 7870 7871 ahd_clear_intstat(ahd); 7872 } 7873 7874 int 7875 ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset) 7876 { 7877 struct ahd_devinfo devinfo; 7878 u_int initiator; 7879 u_int target; 7880 u_int max_scsiid; 7881 int found; 7882 u_int fifo; 7883 u_int next_fifo; 7884 7885 ahd->pending_device = NULL; 7886 7887 ahd_compile_devinfo(&devinfo, 7888 CAM_TARGET_WILDCARD, 7889 CAM_TARGET_WILDCARD, 7890 CAM_LUN_WILDCARD, 7891 channel, ROLE_UNKNOWN); 7892 ahd_pause(ahd); 7893 7894 /* Make sure the sequencer is in a safe location. */ 7895 ahd_clear_critical_section(ahd); 7896 7897 #ifdef AHD_TARGET_MODE 7898 if ((ahd->flags & AHD_TARGETROLE) != 0) { 7899 ahd_run_tqinfifo(ahd, /*paused*/TRUE); 7900 } 7901 #endif 7902 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7903 7904 /* 7905 * Disable selections so no automatic hardware 7906 * functions will modify chip state. 7907 */ 7908 ahd_outb(ahd, SCSISEQ0, 0); 7909 ahd_outb(ahd, SCSISEQ1, 0); 7910 7911 /* 7912 * Safely shut down our DMA engines. Always start with 7913 * the FIFO that is not currently active (if any are 7914 * actively connected). 7915 */ 7916 next_fifo = fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO; 7917 if (next_fifo > CURRFIFO_1) 7918 /* If disconneced, arbitrarily start with FIFO1. */ 7919 next_fifo = fifo = 0; 7920 do { 7921 next_fifo ^= CURRFIFO_1; 7922 ahd_set_modes(ahd, next_fifo, next_fifo); 7923 ahd_outb(ahd, DFCNTRL, 7924 ahd_inb(ahd, DFCNTRL) & ~(SCSIEN|HDMAEN)); 7925 while ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) 7926 aic_delay(10); 7927 /* 7928 * Set CURRFIFO to the now inactive channel. 7929 */ 7930 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 7931 ahd_outb(ahd, DFFSTAT, next_fifo); 7932 } while (next_fifo != fifo); 7933 7934 /* 7935 * Reset the bus if we are initiating this reset 7936 */ 7937 ahd_clear_msg_state(ahd); 7938 ahd_outb(ahd, SIMODE1, 7939 ahd_inb(ahd, SIMODE1) & ~(ENBUSFREE|ENSCSIRST)); 7940 7941 if (initiate_reset) 7942 ahd_reset_current_bus(ahd); 7943 7944 ahd_clear_intstat(ahd); 7945 7946 /* 7947 * Clean up all the state information for the 7948 * pending transactions on this bus. 7949 */ 7950 found = ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, channel, 7951 CAM_LUN_WILDCARD, SCB_LIST_NULL, 7952 ROLE_UNKNOWN, CAM_SCSI_BUS_RESET); 7953 7954 /* 7955 * Cleanup anything left in the FIFOs. 7956 */ 7957 ahd_clear_fifo(ahd, 0); 7958 ahd_clear_fifo(ahd, 1); 7959 7960 /* 7961 * Revert to async/narrow transfers until we renegotiate. 7962 */ 7963 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 7964 for (target = 0; target <= max_scsiid; target++) { 7965 if (ahd->enabled_targets[target] == NULL) 7966 continue; 7967 for (initiator = 0; initiator <= max_scsiid; initiator++) { 7968 struct ahd_devinfo devinfo; 7969 7970 ahd_compile_devinfo(&devinfo, target, initiator, 7971 CAM_LUN_WILDCARD, 7972 'A', ROLE_UNKNOWN); 7973 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 7974 AHD_TRANS_CUR, /*paused*/TRUE); 7975 ahd_set_syncrate(ahd, &devinfo, /*period*/0, 7976 /*offset*/0, /*ppr_options*/0, 7977 AHD_TRANS_CUR, /*paused*/TRUE); 7978 } 7979 } 7980 7981 #ifdef AHD_TARGET_MODE 7982 max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7; 7983 7984 /* 7985 * Send an immediate notify ccb to all target more peripheral 7986 * drivers affected by this action. 7987 */ 7988 for (target = 0; target <= max_scsiid; target++) { 7989 struct ahd_tmode_tstate* tstate; 7990 u_int lun; 7991 7992 tstate = ahd->enabled_targets[target]; 7993 if (tstate == NULL) 7994 continue; 7995 for (lun = 0; lun < AHD_NUM_LUNS; lun++) { 7996 struct ahd_tmode_lstate* lstate; 7997 7998 lstate = tstate->enabled_luns[lun]; 7999 if (lstate == NULL) 8000 continue; 8001 8002 ahd_queue_lstate_event(ahd, lstate, CAM_TARGET_WILDCARD, 8003 EVENT_TYPE_BUS_RESET, /*arg*/0); 8004 ahd_send_lstate_events(ahd, lstate); 8005 } 8006 } 8007 #endif 8008 /* Notify the XPT that a bus reset occurred */ 8009 ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD, 8010 CAM_LUN_WILDCARD, AC_BUS_RESET, NULL); 8011 ahd_restart(ahd); 8012 /* 8013 * Freeze the SIMQ until our poller can determine that 8014 * the bus reset has really gone away. We set the initial 8015 * timer to 0 to have the check performed as soon as possible 8016 * from the timer context. 8017 */ 8018 if ((ahd->flags & AHD_RESET_POLL_ACTIVE) == 0) { 8019 ahd->flags |= AHD_RESET_POLL_ACTIVE; 8020 aic_freeze_simq(ahd); 8021 aic_timer_reset(&ahd->reset_timer, 0, ahd_reset_poll, ahd); 8022 } 8023 return (found); 8024 } 8025 8026 #define AHD_RESET_POLL_MS 1 8027 static void 8028 ahd_reset_poll(void *arg) 8029 { 8030 struct ahd_softc *ahd = (struct ahd_softc *)arg; 8031 u_int scsiseq1; 8032 8033 ahd_lock(ahd); 8034 ahd_pause(ahd); 8035 ahd_update_modes(ahd); 8036 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8037 ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI); 8038 if ((ahd_inb(ahd, SSTAT1) & SCSIRSTI) != 0) { 8039 aic_timer_reset(&ahd->reset_timer, AHD_RESET_POLL_MS, 8040 ahd_reset_poll, ahd); 8041 ahd_unpause(ahd); 8042 ahd_unlock(ahd); 8043 return; 8044 } 8045 8046 /* Reset is now low. Complete chip reinitialization. */ 8047 ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST); 8048 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 8049 ahd_outb(ahd, SCSISEQ1, scsiseq1 & (ENSELI|ENRSELI|ENAUTOATNP)); 8050 ahd_unpause(ahd); 8051 ahd->flags &= ~AHD_RESET_POLL_ACTIVE; 8052 aic_release_simq(ahd); 8053 ahd_unlock(ahd); 8054 } 8055 8056 /**************************** Statistics Processing ***************************/ 8057 static void 8058 ahd_stat_timer(void *arg) 8059 { 8060 struct ahd_softc *ahd = (struct ahd_softc *)arg; 8061 int enint_coal; 8062 8063 ahd_lock(ahd); 8064 enint_coal = ahd->hs_mailbox & ENINT_COALESCE; 8065 if (ahd->cmdcmplt_total > ahd->int_coalescing_threshold) 8066 enint_coal |= ENINT_COALESCE; 8067 else if (ahd->cmdcmplt_total < ahd->int_coalescing_stop_threshold) 8068 enint_coal &= ~ENINT_COALESCE; 8069 8070 if (enint_coal != (ahd->hs_mailbox & ENINT_COALESCE)) { 8071 ahd_enable_coalescing(ahd, enint_coal); 8072 #ifdef AHD_DEBUG 8073 if ((ahd_debug & AHD_SHOW_INT_COALESCING) != 0) 8074 printf("%s: Interrupt coalescing " 8075 "now %sabled. Cmds %d\n", 8076 ahd_name(ahd), 8077 (enint_coal & ENINT_COALESCE) ? "en" : "dis", 8078 ahd->cmdcmplt_total); 8079 #endif 8080 } 8081 8082 ahd->cmdcmplt_bucket = (ahd->cmdcmplt_bucket+1) & (AHD_STAT_BUCKETS-1); 8083 ahd->cmdcmplt_total -= ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]; 8084 ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket] = 0; 8085 aic_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_MS, 8086 ahd_stat_timer, ahd); 8087 ahd_unlock(ahd); 8088 } 8089 8090 /****************************** Status Processing *****************************/ 8091 void 8092 ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb) 8093 { 8094 if (scb->hscb->shared_data.istatus.scsi_status != 0) { 8095 ahd_handle_scsi_status(ahd, scb); 8096 } else { 8097 ahd_calc_residual(ahd, scb); 8098 ahd_done(ahd, scb); 8099 } 8100 } 8101 8102 void 8103 ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb) 8104 { 8105 struct hardware_scb *hscb; 8106 int paused; 8107 8108 /* 8109 * The sequencer freezes its select-out queue 8110 * anytime a SCSI status error occurs. We must 8111 * handle the error and increment our qfreeze count 8112 * to allow the sequencer to continue. We don't 8113 * bother clearing critical sections here since all 8114 * operations are on data structures that the sequencer 8115 * is not touching once the queue is frozen. 8116 */ 8117 hscb = scb->hscb; 8118 8119 if (ahd_is_paused(ahd)) { 8120 paused = 1; 8121 } else { 8122 paused = 0; 8123 ahd_pause(ahd); 8124 } 8125 8126 /* Freeze the queue until the client sees the error. */ 8127 ahd_freeze_devq(ahd, scb); 8128 aic_freeze_scb(scb); 8129 ahd->qfreeze_cnt++; 8130 ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt); 8131 8132 if (paused == 0) 8133 ahd_unpause(ahd); 8134 8135 /* Don't want to clobber the original sense code */ 8136 if ((scb->flags & SCB_SENSE) != 0) { 8137 /* 8138 * Clear the SCB_SENSE Flag and perform 8139 * a normal command completion. 8140 */ 8141 scb->flags &= ~SCB_SENSE; 8142 aic_set_transaction_status(scb, CAM_AUTOSENSE_FAIL); 8143 ahd_done(ahd, scb); 8144 return; 8145 } 8146 aic_set_transaction_status(scb, CAM_SCSI_STATUS_ERROR); 8147 aic_set_scsi_status(scb, hscb->shared_data.istatus.scsi_status); 8148 switch (hscb->shared_data.istatus.scsi_status) { 8149 case STATUS_PKT_SENSE: 8150 { 8151 struct scsi_status_iu_header *siu; 8152 8153 ahd_sync_sense(ahd, scb, BUS_DMASYNC_POSTREAD); 8154 siu = (struct scsi_status_iu_header *)scb->sense_data; 8155 aic_set_scsi_status(scb, siu->status); 8156 #ifdef AHD_DEBUG 8157 if ((ahd_debug & AHD_SHOW_SENSE) != 0) { 8158 ahd_print_path(ahd, scb); 8159 printf("SCB 0x%x Received PKT Status of 0x%x\n", 8160 SCB_GET_TAG(scb), siu->status); 8161 printf("\tflags = 0x%x, sense len = 0x%x, " 8162 "pktfail = 0x%x\n", 8163 siu->flags, scsi_4btoul(siu->sense_length), 8164 scsi_4btoul(siu->pkt_failures_length)); 8165 } 8166 #endif 8167 if ((siu->flags & SIU_RSPVALID) != 0) { 8168 ahd_print_path(ahd, scb); 8169 if (scsi_4btoul(siu->pkt_failures_length) < 4) { 8170 printf("Unable to parse pkt_failures\n"); 8171 } else { 8172 switch (SIU_PKTFAIL_CODE(siu)) { 8173 case SIU_PFC_NONE: 8174 printf("No packet failure found\n"); 8175 AHD_UNCORRECTABLE_ERROR(ahd); 8176 break; 8177 case SIU_PFC_CIU_FIELDS_INVALID: 8178 printf("Invalid Command IU Field\n"); 8179 AHD_UNCORRECTABLE_ERROR(ahd); 8180 break; 8181 case SIU_PFC_TMF_NOT_SUPPORTED: 8182 printf("TMF not supportd\n"); 8183 AHD_UNCORRECTABLE_ERROR(ahd); 8184 break; 8185 case SIU_PFC_TMF_FAILED: 8186 printf("TMF failed\n"); 8187 AHD_UNCORRECTABLE_ERROR(ahd); 8188 break; 8189 case SIU_PFC_INVALID_TYPE_CODE: 8190 printf("Invalid L_Q Type code\n"); 8191 AHD_UNCORRECTABLE_ERROR(ahd); 8192 break; 8193 case SIU_PFC_ILLEGAL_REQUEST: 8194 AHD_UNCORRECTABLE_ERROR(ahd); 8195 printf("Illegal request\n"); 8196 default: 8197 break; 8198 } 8199 } 8200 if (siu->status == SCSI_STATUS_OK) 8201 aic_set_transaction_status(scb, 8202 CAM_REQ_CMP_ERR); 8203 } 8204 if ((siu->flags & SIU_SNSVALID) != 0) { 8205 scb->flags |= SCB_PKT_SENSE; 8206 #ifdef AHD_DEBUG 8207 if ((ahd_debug & AHD_SHOW_SENSE) != 0) 8208 printf("Sense data available\n"); 8209 #endif 8210 } 8211 ahd_done(ahd, scb); 8212 break; 8213 } 8214 case SCSI_STATUS_CMD_TERMINATED: 8215 case SCSI_STATUS_CHECK_COND: 8216 { 8217 struct ahd_devinfo devinfo; 8218 struct ahd_dma_seg *sg; 8219 struct scsi_sense *sc; 8220 struct ahd_initiator_tinfo *targ_info; 8221 struct ahd_tmode_tstate *tstate; 8222 struct ahd_transinfo *tinfo; 8223 #ifdef AHD_DEBUG 8224 if (ahd_debug & AHD_SHOW_SENSE) { 8225 ahd_print_path(ahd, scb); 8226 printf("SCB %d: requests Check Status\n", 8227 SCB_GET_TAG(scb)); 8228 } 8229 #endif 8230 8231 if (aic_perform_autosense(scb) == 0) 8232 break; 8233 8234 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb), 8235 SCB_GET_TARGET(ahd, scb), 8236 SCB_GET_LUN(scb), 8237 SCB_GET_CHANNEL(ahd, scb), 8238 ROLE_INITIATOR); 8239 targ_info = ahd_fetch_transinfo(ahd, 8240 devinfo.channel, 8241 devinfo.our_scsiid, 8242 devinfo.target, 8243 &tstate); 8244 tinfo = &targ_info->curr; 8245 sg = scb->sg_list; 8246 sc = (struct scsi_sense *)hscb->shared_data.idata.cdb; 8247 /* 8248 * Save off the residual if there is one. 8249 */ 8250 ahd_update_residual(ahd, scb); 8251 #ifdef AHD_DEBUG 8252 if (ahd_debug & AHD_SHOW_SENSE) { 8253 ahd_print_path(ahd, scb); 8254 printf("Sending Sense\n"); 8255 } 8256 #endif 8257 scb->sg_count = 0; 8258 sg = ahd_sg_setup(ahd, scb, sg, ahd_get_sense_bufaddr(ahd, scb), 8259 aic_get_sense_bufsize(ahd, scb), 8260 /*last*/TRUE); 8261 sc->opcode = REQUEST_SENSE; 8262 sc->byte2 = 0; 8263 if (tinfo->protocol_version <= SCSI_REV_2 8264 && SCB_GET_LUN(scb) < 8) 8265 sc->byte2 = SCB_GET_LUN(scb) << 5; 8266 sc->unused[0] = 0; 8267 sc->unused[1] = 0; 8268 sc->length = aic_get_sense_bufsize(ahd, scb); 8269 sc->control = 0; 8270 8271 /* 8272 * We can't allow the target to disconnect. 8273 * This will be an untagged transaction and 8274 * having the target disconnect will make this 8275 * transaction indestinguishable from outstanding 8276 * tagged transactions. 8277 */ 8278 hscb->control = 0; 8279 8280 /* 8281 * This request sense could be because the 8282 * the device lost power or in some other 8283 * way has lost our transfer negotiations. 8284 * Renegotiate if appropriate. Unit attention 8285 * errors will be reported before any data 8286 * phases occur. 8287 */ 8288 if (aic_get_residual(scb) == aic_get_transfer_length(scb)) { 8289 ahd_update_neg_request(ahd, &devinfo, 8290 tstate, targ_info, 8291 AHD_NEG_IF_NON_ASYNC); 8292 } 8293 if (tstate->auto_negotiate & devinfo.target_mask) { 8294 hscb->control |= MK_MESSAGE; 8295 scb->flags &= 8296 ~(SCB_NEGOTIATE|SCB_ABORT|SCB_DEVICE_RESET); 8297 scb->flags |= SCB_AUTO_NEGOTIATE; 8298 } 8299 hscb->cdb_len = sizeof(*sc); 8300 ahd_setup_data_scb(ahd, scb); 8301 scb->flags |= SCB_SENSE; 8302 ahd_queue_scb(ahd, scb); 8303 /* 8304 * Ensure we have enough time to actually 8305 * retrieve the sense, but only schedule 8306 * the timer if we are not in recovery or 8307 * this is a recovery SCB that is allowed 8308 * to have an active timer. 8309 */ 8310 if (ahd->scb_data.recovery_scbs == 0 8311 || (scb->flags & SCB_RECOVERY_SCB) != 0) 8312 aic_scb_timer_reset(scb, 5 * 1000); 8313 break; 8314 } 8315 case SCSI_STATUS_OK: 8316 printf("%s: Interrupted for staus of 0???\n", 8317 ahd_name(ahd)); 8318 /* FALLTHROUGH */ 8319 default: 8320 ahd_done(ahd, scb); 8321 break; 8322 } 8323 } 8324 8325 /* 8326 * Calculate the residual for a just completed SCB. 8327 */ 8328 void 8329 ahd_calc_residual(struct ahd_softc *ahd, struct scb *scb) 8330 { 8331 struct hardware_scb *hscb; 8332 struct initiator_status *spkt; 8333 uint32_t sgptr; 8334 uint32_t resid_sgptr; 8335 uint32_t resid; 8336 8337 /* 8338 * 5 cases. 8339 * 1) No residual. 8340 * SG_STATUS_VALID clear in sgptr. 8341 * 2) Transferless command 8342 * 3) Never performed any transfers. 8343 * sgptr has SG_FULL_RESID set. 8344 * 4) No residual but target did not 8345 * save data pointers after the 8346 * last transfer, so sgptr was 8347 * never updated. 8348 * 5) We have a partial residual. 8349 * Use residual_sgptr to determine 8350 * where we are. 8351 */ 8352 8353 hscb = scb->hscb; 8354 sgptr = aic_le32toh(hscb->sgptr); 8355 if ((sgptr & SG_STATUS_VALID) == 0) 8356 /* Case 1 */ 8357 return; 8358 sgptr &= ~SG_STATUS_VALID; 8359 8360 if ((sgptr & SG_LIST_NULL) != 0) 8361 /* Case 2 */ 8362 return; 8363 8364 /* 8365 * Residual fields are the same in both 8366 * target and initiator status packets, 8367 * so we can always use the initiator fields 8368 * regardless of the role for this SCB. 8369 */ 8370 spkt = &hscb->shared_data.istatus; 8371 resid_sgptr = aic_le32toh(spkt->residual_sgptr); 8372 if ((sgptr & SG_FULL_RESID) != 0) { 8373 /* Case 3 */ 8374 resid = aic_get_transfer_length(scb); 8375 } else if ((resid_sgptr & SG_LIST_NULL) != 0) { 8376 /* Case 4 */ 8377 return; 8378 } else if ((resid_sgptr & SG_OVERRUN_RESID) != 0) { 8379 ahd_print_path(ahd, scb); 8380 printf("data overrun detected Tag == 0x%x.\n", 8381 SCB_GET_TAG(scb)); 8382 ahd_freeze_devq(ahd, scb); 8383 aic_set_transaction_status(scb, CAM_DATA_RUN_ERR); 8384 aic_freeze_scb(scb); 8385 return; 8386 } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) { 8387 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr); 8388 /* NOTREACHED */ 8389 } else { 8390 struct ahd_dma_seg *sg; 8391 8392 /* 8393 * Remainder of the SG where the transfer 8394 * stopped. 8395 */ 8396 resid = aic_le32toh(spkt->residual_datacnt) & AHD_SG_LEN_MASK; 8397 sg = ahd_sg_bus_to_virt(ahd, scb, resid_sgptr & SG_PTR_MASK); 8398 8399 /* The residual sg_ptr always points to the next sg */ 8400 sg--; 8401 8402 /* 8403 * Add up the contents of all residual 8404 * SG segments that are after the SG where 8405 * the transfer stopped. 8406 */ 8407 while ((aic_le32toh(sg->len) & AHD_DMA_LAST_SEG) == 0) { 8408 sg++; 8409 resid += aic_le32toh(sg->len) & AHD_SG_LEN_MASK; 8410 } 8411 } 8412 if ((scb->flags & SCB_SENSE) == 0) 8413 aic_set_residual(scb, resid); 8414 else 8415 aic_set_sense_residual(scb, resid); 8416 8417 #ifdef AHD_DEBUG 8418 if ((ahd_debug & AHD_SHOW_MISC) != 0) { 8419 ahd_print_path(ahd, scb); 8420 printf("Handled %sResidual of %d bytes\n", 8421 (scb->flags & SCB_SENSE) ? "Sense " : "", resid); 8422 } 8423 #endif 8424 } 8425 8426 /******************************* Target Mode **********************************/ 8427 #ifdef AHD_TARGET_MODE 8428 /* 8429 * Add a target mode event to this lun's queue 8430 */ 8431 static void 8432 ahd_queue_lstate_event(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate, 8433 u_int initiator_id, u_int event_type, u_int event_arg) 8434 { 8435 struct ahd_tmode_event *event; 8436 int pending; 8437 8438 xpt_freeze_devq(lstate->path, /*count*/1); 8439 if (lstate->event_w_idx >= lstate->event_r_idx) 8440 pending = lstate->event_w_idx - lstate->event_r_idx; 8441 else 8442 pending = AHD_TMODE_EVENT_BUFFER_SIZE + 1 8443 - (lstate->event_r_idx - lstate->event_w_idx); 8444 8445 if (event_type == EVENT_TYPE_BUS_RESET 8446 || event_type == MSG_BUS_DEV_RESET) { 8447 /* 8448 * Any earlier events are irrelevant, so reset our buffer. 8449 * This has the effect of allowing us to deal with reset 8450 * floods (an external device holding down the reset line) 8451 * without losing the event that is really interesting. 8452 */ 8453 lstate->event_r_idx = 0; 8454 lstate->event_w_idx = 0; 8455 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE); 8456 } 8457 8458 if (pending == AHD_TMODE_EVENT_BUFFER_SIZE) { 8459 xpt_print_path(lstate->path); 8460 printf("immediate event %x:%x lost\n", 8461 lstate->event_buffer[lstate->event_r_idx].event_type, 8462 lstate->event_buffer[lstate->event_r_idx].event_arg); 8463 lstate->event_r_idx++; 8464 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8465 lstate->event_r_idx = 0; 8466 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE); 8467 } 8468 8469 event = &lstate->event_buffer[lstate->event_w_idx]; 8470 event->initiator_id = initiator_id; 8471 event->event_type = event_type; 8472 event->event_arg = event_arg; 8473 lstate->event_w_idx++; 8474 if (lstate->event_w_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8475 lstate->event_w_idx = 0; 8476 } 8477 8478 /* 8479 * Send any target mode events queued up waiting 8480 * for immediate notify resources. 8481 */ 8482 void 8483 ahd_send_lstate_events(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate) 8484 { 8485 struct ccb_hdr *ccbh; 8486 struct ccb_immediate_notify *inot; 8487 8488 while (lstate->event_r_idx != lstate->event_w_idx 8489 && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) { 8490 struct ahd_tmode_event *event; 8491 8492 event = &lstate->event_buffer[lstate->event_r_idx]; 8493 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle); 8494 inot = (struct ccb_immediate_notify *)ccbh; 8495 switch (event->event_type) { 8496 case EVENT_TYPE_BUS_RESET: 8497 ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN; 8498 break; 8499 default: 8500 ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN; 8501 inot->arg = event->event_type; 8502 inot->seq_id = event->event_arg; 8503 break; 8504 } 8505 inot->initiator_id = event->initiator_id; 8506 xpt_done((union ccb *)inot); 8507 lstate->event_r_idx++; 8508 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE) 8509 lstate->event_r_idx = 0; 8510 } 8511 } 8512 #endif 8513 8514 /******************** Sequencer Program Patching/Download *********************/ 8515 8516 #ifdef AHD_DUMP_SEQ 8517 void 8518 ahd_dumpseq(struct ahd_softc* ahd) 8519 { 8520 int i; 8521 int max_prog; 8522 8523 max_prog = 2048; 8524 8525 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8526 ahd_outw(ahd, PRGMCNT, 0); 8527 for (i = 0; i < max_prog; i++) { 8528 uint8_t ins_bytes[4]; 8529 8530 ahd_insb(ahd, SEQRAM, ins_bytes, 4); 8531 printf("0x%08x\n", ins_bytes[0] << 24 8532 | ins_bytes[1] << 16 8533 | ins_bytes[2] << 8 8534 | ins_bytes[3]); 8535 } 8536 } 8537 #endif 8538 8539 static void 8540 ahd_loadseq(struct ahd_softc *ahd) 8541 { 8542 struct cs cs_table[num_critical_sections]; 8543 u_int begin_set[num_critical_sections]; 8544 u_int end_set[num_critical_sections]; 8545 struct patch *cur_patch; 8546 u_int cs_count; 8547 u_int cur_cs; 8548 u_int i; 8549 int downloaded; 8550 u_int skip_addr; 8551 u_int sg_prefetch_cnt; 8552 u_int sg_prefetch_cnt_limit; 8553 u_int sg_prefetch_align; 8554 u_int sg_size; 8555 u_int cacheline_mask; 8556 uint8_t download_consts[DOWNLOAD_CONST_COUNT]; 8557 8558 if (bootverbose) 8559 printf("%s: Downloading Sequencer Program...", 8560 ahd_name(ahd)); 8561 8562 #if DOWNLOAD_CONST_COUNT != 8 8563 #error "Download Const Mismatch" 8564 #endif 8565 /* 8566 * Start out with 0 critical sections 8567 * that apply to this firmware load. 8568 */ 8569 cs_count = 0; 8570 cur_cs = 0; 8571 memset(begin_set, 0, sizeof(begin_set)); 8572 memset(end_set, 0, sizeof(end_set)); 8573 8574 /* 8575 * Setup downloadable constant table. 8576 * 8577 * The computation for the S/G prefetch variables is 8578 * a bit complicated. We would like to always fetch 8579 * in terms of cachelined sized increments. However, 8580 * if the cacheline is not an even multiple of the 8581 * SG element size or is larger than our SG RAM, using 8582 * just the cache size might leave us with only a portion 8583 * of an SG element at the tail of a prefetch. If the 8584 * cacheline is larger than our S/G prefetch buffer less 8585 * the size of an SG element, we may round down to a cacheline 8586 * that doesn't contain any or all of the S/G of interest 8587 * within the bounds of our S/G ram. Provide variables to 8588 * the sequencer that will allow it to handle these edge 8589 * cases. 8590 */ 8591 /* Start by aligning to the nearest cacheline. */ 8592 sg_prefetch_align = ahd->pci_cachesize; 8593 if (sg_prefetch_align == 0) 8594 sg_prefetch_align = 8; 8595 /* Round down to the nearest power of 2. */ 8596 while (powerof2(sg_prefetch_align) == 0) 8597 sg_prefetch_align--; 8598 8599 cacheline_mask = sg_prefetch_align - 1; 8600 8601 /* 8602 * If the cacheline boundary is greater than half our prefetch RAM 8603 * we risk not being able to fetch even a single complete S/G 8604 * segment if we align to that boundary. 8605 */ 8606 if (sg_prefetch_align > CCSGADDR_MAX/2) 8607 sg_prefetch_align = CCSGADDR_MAX/2; 8608 /* Start by fetching a single cacheline. */ 8609 sg_prefetch_cnt = sg_prefetch_align; 8610 /* 8611 * Increment the prefetch count by cachelines until 8612 * at least one S/G element will fit. 8613 */ 8614 sg_size = sizeof(struct ahd_dma_seg); 8615 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) 8616 sg_size = sizeof(struct ahd_dma64_seg); 8617 while (sg_prefetch_cnt < sg_size) 8618 sg_prefetch_cnt += sg_prefetch_align; 8619 /* 8620 * If the cacheline is not an even multiple of 8621 * the S/G size, we may only get a partial S/G when 8622 * we align. Add a cacheline if this is the case. 8623 */ 8624 if ((sg_prefetch_align % sg_size) != 0 8625 && (sg_prefetch_cnt < CCSGADDR_MAX)) 8626 sg_prefetch_cnt += sg_prefetch_align; 8627 /* 8628 * Lastly, compute a value that the sequencer can use 8629 * to determine if the remainder of the CCSGRAM buffer 8630 * has a full S/G element in it. 8631 */ 8632 sg_prefetch_cnt_limit = -(sg_prefetch_cnt - sg_size + 1); 8633 download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt; 8634 download_consts[SG_PREFETCH_CNT_LIMIT] = sg_prefetch_cnt_limit; 8635 download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_align - 1); 8636 download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_align - 1); 8637 download_consts[SG_SIZEOF] = sg_size; 8638 download_consts[PKT_OVERRUN_BUFOFFSET] = 8639 (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256; 8640 download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN; 8641 download_consts[CACHELINE_MASK] = cacheline_mask; 8642 cur_patch = patches; 8643 downloaded = 0; 8644 skip_addr = 0; 8645 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 8646 ahd_outw(ahd, PRGMCNT, 0); 8647 8648 for (i = 0; i < sizeof(seqprog)/4; i++) { 8649 if (ahd_check_patch(ahd, &cur_patch, i, &skip_addr) == 0) { 8650 /* 8651 * Don't download this instruction as it 8652 * is in a patch that was removed. 8653 */ 8654 continue; 8655 } 8656 /* 8657 * Move through the CS table until we find a CS 8658 * that might apply to this instruction. 8659 */ 8660 for (; cur_cs < num_critical_sections; cur_cs++) { 8661 if (critical_sections[cur_cs].end <= i) { 8662 if (begin_set[cs_count] == TRUE 8663 && end_set[cs_count] == FALSE) { 8664 cs_table[cs_count].end = downloaded; 8665 end_set[cs_count] = TRUE; 8666 cs_count++; 8667 } 8668 continue; 8669 } 8670 if (critical_sections[cur_cs].begin <= i 8671 && begin_set[cs_count] == FALSE) { 8672 cs_table[cs_count].begin = downloaded; 8673 begin_set[cs_count] = TRUE; 8674 } 8675 break; 8676 } 8677 ahd_download_instr(ahd, i, download_consts); 8678 downloaded++; 8679 } 8680 8681 ahd->num_critical_sections = cs_count; 8682 if (cs_count != 0) { 8683 cs_count *= sizeof(struct cs); 8684 ahd->critical_sections = malloc(cs_count, M_DEVBUF, M_NOWAIT); 8685 if (ahd->critical_sections == NULL) 8686 panic("ahd_loadseq: Could not malloc"); 8687 memcpy(ahd->critical_sections, cs_table, cs_count); 8688 } 8689 ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE); 8690 8691 if (bootverbose) { 8692 printf(" %d instructions downloaded\n", downloaded); 8693 printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n", 8694 ahd_name(ahd), ahd->features, ahd->bugs, ahd->flags); 8695 } 8696 } 8697 8698 static int 8699 ahd_check_patch(struct ahd_softc *ahd, struct patch **start_patch, 8700 u_int start_instr, u_int *skip_addr) 8701 { 8702 struct patch *cur_patch; 8703 struct patch *last_patch; 8704 u_int num_patches; 8705 8706 num_patches = sizeof(patches)/sizeof(struct patch); 8707 last_patch = &patches[num_patches]; 8708 cur_patch = *start_patch; 8709 8710 while (cur_patch < last_patch && start_instr == cur_patch->begin) { 8711 if (cur_patch->patch_func(ahd) == 0) { 8712 /* Start rejecting code */ 8713 *skip_addr = start_instr + cur_patch->skip_instr; 8714 cur_patch += cur_patch->skip_patch; 8715 } else { 8716 /* Accepted this patch. Advance to the next 8717 * one and wait for our instruction pointer to 8718 * hit this point. 8719 */ 8720 cur_patch++; 8721 } 8722 } 8723 8724 *start_patch = cur_patch; 8725 if (start_instr < *skip_addr) 8726 /* Still skipping */ 8727 return (0); 8728 8729 return (1); 8730 } 8731 8732 static u_int 8733 ahd_resolve_seqaddr(struct ahd_softc *ahd, u_int address) 8734 { 8735 struct patch *cur_patch; 8736 int address_offset; 8737 u_int skip_addr; 8738 u_int i; 8739 8740 address_offset = 0; 8741 cur_patch = patches; 8742 skip_addr = 0; 8743 8744 for (i = 0; i < address;) { 8745 ahd_check_patch(ahd, &cur_patch, i, &skip_addr); 8746 8747 if (skip_addr > i) { 8748 int end_addr; 8749 8750 end_addr = MIN(address, skip_addr); 8751 address_offset += end_addr - i; 8752 i = skip_addr; 8753 } else { 8754 i++; 8755 } 8756 } 8757 return (address - address_offset); 8758 } 8759 8760 static void 8761 ahd_download_instr(struct ahd_softc *ahd, u_int instrptr, uint8_t *dconsts) 8762 { 8763 union ins_formats instr; 8764 struct ins_format1 *fmt1_ins; 8765 struct ins_format3 *fmt3_ins; 8766 u_int opcode; 8767 8768 /* 8769 * The firmware is always compiled into a little endian format. 8770 */ 8771 instr.integer = aic_le32toh(*(uint32_t*)&seqprog[instrptr * 4]); 8772 8773 fmt1_ins = &instr.format1; 8774 fmt3_ins = NULL; 8775 8776 /* Pull the opcode */ 8777 opcode = instr.format1.opcode; 8778 switch (opcode) { 8779 case AIC_OP_JMP: 8780 case AIC_OP_JC: 8781 case AIC_OP_JNC: 8782 case AIC_OP_CALL: 8783 case AIC_OP_JNE: 8784 case AIC_OP_JNZ: 8785 case AIC_OP_JE: 8786 case AIC_OP_JZ: 8787 { 8788 fmt3_ins = &instr.format3; 8789 fmt3_ins->address = ahd_resolve_seqaddr(ahd, fmt3_ins->address); 8790 /* FALLTHROUGH */ 8791 } 8792 case AIC_OP_OR: 8793 case AIC_OP_AND: 8794 case AIC_OP_XOR: 8795 case AIC_OP_ADD: 8796 case AIC_OP_ADC: 8797 case AIC_OP_BMOV: 8798 if (fmt1_ins->parity != 0) { 8799 fmt1_ins->immediate = dconsts[fmt1_ins->immediate]; 8800 } 8801 fmt1_ins->parity = 0; 8802 /* FALLTHROUGH */ 8803 case AIC_OP_ROL: 8804 { 8805 int i, count; 8806 8807 /* Calculate odd parity for the instruction */ 8808 for (i = 0, count = 0; i < 31; i++) { 8809 uint32_t mask; 8810 8811 mask = 0x01 << i; 8812 if ((instr.integer & mask) != 0) 8813 count++; 8814 } 8815 if ((count & 0x01) == 0) 8816 instr.format1.parity = 1; 8817 8818 /* The sequencer is a little endian cpu */ 8819 instr.integer = aic_htole32(instr.integer); 8820 ahd_outsb(ahd, SEQRAM, instr.bytes, 4); 8821 break; 8822 } 8823 default: 8824 panic("Unknown opcode encountered in seq program"); 8825 break; 8826 } 8827 } 8828 8829 static int 8830 ahd_probe_stack_size(struct ahd_softc *ahd) 8831 { 8832 int last_probe; 8833 8834 last_probe = 0; 8835 while (1) { 8836 int i; 8837 8838 /* 8839 * We avoid using 0 as a pattern to avoid 8840 * confusion if the stack implementation 8841 * "back-fills" with zeros when "poping' 8842 * entries. 8843 */ 8844 for (i = 1; i <= last_probe+1; i++) { 8845 ahd_outb(ahd, STACK, i & 0xFF); 8846 ahd_outb(ahd, STACK, (i >> 8) & 0xFF); 8847 } 8848 8849 /* Verify */ 8850 for (i = last_probe+1; i > 0; i--) { 8851 u_int stack_entry; 8852 8853 stack_entry = ahd_inb(ahd, STACK) 8854 |(ahd_inb(ahd, STACK) << 8); 8855 if (stack_entry != i) 8856 goto sized; 8857 } 8858 last_probe++; 8859 } 8860 sized: 8861 return (last_probe); 8862 } 8863 8864 void 8865 ahd_dump_all_cards_state(void) 8866 { 8867 struct ahd_softc *list_ahd; 8868 8869 TAILQ_FOREACH(list_ahd, &ahd_tailq, links) { 8870 ahd_dump_card_state(list_ahd); 8871 } 8872 } 8873 8874 int 8875 ahd_print_register(ahd_reg_parse_entry_t *table, u_int num_entries, 8876 const char *name, u_int address, u_int value, 8877 u_int *cur_column, u_int wrap_point) 8878 { 8879 int printed; 8880 u_int printed_mask; 8881 u_int dummy_column; 8882 8883 if (cur_column == NULL) { 8884 dummy_column = 0; 8885 cur_column = &dummy_column; 8886 } 8887 8888 if (cur_column != NULL && *cur_column >= wrap_point) { 8889 printf("\n"); 8890 *cur_column = 0; 8891 } 8892 printed = printf("%s[0x%x]", name, value); 8893 if (table == NULL) { 8894 printed += printf(" "); 8895 *cur_column += printed; 8896 return (printed); 8897 } 8898 printed_mask = 0; 8899 while (printed_mask != 0xFF) { 8900 int entry; 8901 8902 for (entry = 0; entry < num_entries; entry++) { 8903 if (((value & table[entry].mask) 8904 != table[entry].value) 8905 || ((printed_mask & table[entry].mask) 8906 == table[entry].mask)) 8907 continue; 8908 8909 printed += printf("%s%s", 8910 printed_mask == 0 ? ":(" : "|", 8911 table[entry].name); 8912 printed_mask |= table[entry].mask; 8913 8914 break; 8915 } 8916 if (entry >= num_entries) 8917 break; 8918 } 8919 if (printed_mask != 0) 8920 printed += printf(") "); 8921 else 8922 printed += printf(" "); 8923 *cur_column += printed; 8924 return (printed); 8925 } 8926 8927 void 8928 ahd_dump_card_state(struct ahd_softc *ahd) 8929 { 8930 struct scb *scb; 8931 ahd_mode_state saved_modes; 8932 u_int dffstat; 8933 int paused; 8934 u_int scb_index; 8935 u_int saved_scb_index; 8936 u_int cur_col; 8937 int i; 8938 8939 if (ahd_is_paused(ahd)) { 8940 paused = 1; 8941 } else { 8942 paused = 0; 8943 ahd_pause(ahd); 8944 } 8945 saved_modes = ahd_save_modes(ahd); 8946 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 8947 printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n" 8948 "%s: Dumping Card State at program address 0x%x Mode 0x%x\n", 8949 ahd_name(ahd), 8950 ahd_inw(ahd, CURADDR), 8951 ahd_build_mode_state(ahd, ahd->saved_src_mode, 8952 ahd->saved_dst_mode)); 8953 if (paused) 8954 printf("Card was paused\n"); 8955 8956 if (ahd_check_cmdcmpltqueues(ahd)) 8957 printf("Completions are pending\n"); 8958 8959 /* 8960 * Mode independent registers. 8961 */ 8962 cur_col = 0; 8963 ahd_intstat_print(ahd_inb(ahd, INTSTAT), &cur_col, 50); 8964 ahd_seloid_print(ahd_inb(ahd, SELOID), &cur_col, 50); 8965 ahd_selid_print(ahd_inb(ahd, SELID), &cur_col, 50); 8966 ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50); 8967 ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50); 8968 ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50); 8969 ahd_saved_mode_print(ahd_inb(ahd, SAVED_MODE), &cur_col, 50); 8970 ahd_dffstat_print(ahd_inb(ahd, DFFSTAT), &cur_col, 50); 8971 ahd_scsisigi_print(ahd_inb(ahd, SCSISIGI), &cur_col, 50); 8972 ahd_scsiphase_print(ahd_inb(ahd, SCSIPHASE), &cur_col, 50); 8973 ahd_scsibus_print(ahd_inb(ahd, SCSIBUS), &cur_col, 50); 8974 ahd_lastphase_print(ahd_inb(ahd, LASTPHASE), &cur_col, 50); 8975 ahd_scsiseq0_print(ahd_inb(ahd, SCSISEQ0), &cur_col, 50); 8976 ahd_scsiseq1_print(ahd_inb(ahd, SCSISEQ1), &cur_col, 50); 8977 ahd_seqctl0_print(ahd_inb(ahd, SEQCTL0), &cur_col, 50); 8978 ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50); 8979 ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50); 8980 ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50); 8981 ahd_qfreeze_count_print(ahd_inw(ahd, QFREEZE_COUNT), &cur_col, 50); 8982 ahd_kernel_qfreeze_count_print(ahd_inw(ahd, KERNEL_QFREEZE_COUNT), 8983 &cur_col, 50); 8984 ahd_mk_message_scb_print(ahd_inw(ahd, MK_MESSAGE_SCB), &cur_col, 50); 8985 ahd_mk_message_scsiid_print(ahd_inb(ahd, MK_MESSAGE_SCSIID), 8986 &cur_col, 50); 8987 ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50); 8988 ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50); 8989 ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50); 8990 ahd_sstat3_print(ahd_inb(ahd, SSTAT3), &cur_col, 50); 8991 ahd_perrdiag_print(ahd_inb(ahd, PERRDIAG), &cur_col, 50); 8992 ahd_simode1_print(ahd_inb(ahd, SIMODE1), &cur_col, 50); 8993 ahd_lqistat0_print(ahd_inb(ahd, LQISTAT0), &cur_col, 50); 8994 ahd_lqistat1_print(ahd_inb(ahd, LQISTAT1), &cur_col, 50); 8995 ahd_lqistat2_print(ahd_inb(ahd, LQISTAT2), &cur_col, 50); 8996 ahd_lqostat0_print(ahd_inb(ahd, LQOSTAT0), &cur_col, 50); 8997 ahd_lqostat1_print(ahd_inb(ahd, LQOSTAT1), &cur_col, 50); 8998 ahd_lqostat2_print(ahd_inb(ahd, LQOSTAT2), &cur_col, 50); 8999 printf("\n"); 9000 printf("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x " 9001 "CURRSCB 0x%x NEXTSCB 0x%x\n", 9002 ahd->scb_data.numscbs, ahd_inw(ahd, CMDS_PENDING), 9003 ahd_inw(ahd, LASTSCB), ahd_inw(ahd, CURRSCB), 9004 ahd_inw(ahd, NEXTSCB)); 9005 cur_col = 0; 9006 /* QINFIFO */ 9007 ahd_search_qinfifo(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS, 9008 CAM_LUN_WILDCARD, SCB_LIST_NULL, 9009 ROLE_UNKNOWN, /*status*/0, SEARCH_PRINT); 9010 saved_scb_index = ahd_get_scbptr(ahd); 9011 printf("Pending list:"); 9012 i = 0; 9013 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 9014 if (i++ > AHD_SCB_MAX) 9015 break; 9016 cur_col = printf("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb), 9017 ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT)); 9018 ahd_set_scbptr(ahd, SCB_GET_TAG(scb)); 9019 ahd_scb_control_print(ahd_inb_scbram(ahd, SCB_CONTROL), 9020 &cur_col, 60); 9021 ahd_scb_scsiid_print(ahd_inb_scbram(ahd, SCB_SCSIID), 9022 &cur_col, 60); 9023 } 9024 printf("\nTotal %d\n", i); 9025 9026 printf("Kernel Free SCB lists: "); 9027 i = 0; 9028 TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) { 9029 struct scb *list_scb; 9030 9031 printf("\n COLIDX[%d]: ", AHD_GET_SCB_COL_IDX(ahd, scb)); 9032 list_scb = scb; 9033 do { 9034 printf("%d ", SCB_GET_TAG(list_scb)); 9035 list_scb = LIST_NEXT(list_scb, collision_links); 9036 } while (list_scb && i++ < AHD_SCB_MAX); 9037 } 9038 9039 printf("\n Any Device: "); 9040 LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) { 9041 if (i++ > AHD_SCB_MAX) 9042 break; 9043 printf("%d ", SCB_GET_TAG(scb)); 9044 } 9045 printf("\n"); 9046 9047 printf("Sequencer Complete DMA-inprog list: "); 9048 scb_index = ahd_inw(ahd, COMPLETE_SCB_DMAINPROG_HEAD); 9049 i = 0; 9050 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9051 ahd_set_scbptr(ahd, scb_index); 9052 printf("%d ", scb_index); 9053 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9054 } 9055 printf("\n"); 9056 9057 printf("Sequencer Complete list: "); 9058 scb_index = ahd_inw(ahd, COMPLETE_SCB_HEAD); 9059 i = 0; 9060 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9061 ahd_set_scbptr(ahd, scb_index); 9062 printf("%d ", scb_index); 9063 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9064 } 9065 printf("\n"); 9066 9067 printf("Sequencer DMA-Up and Complete list: "); 9068 scb_index = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD); 9069 i = 0; 9070 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9071 ahd_set_scbptr(ahd, scb_index); 9072 printf("%d ", scb_index); 9073 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9074 } 9075 printf("\n"); 9076 printf("Sequencer On QFreeze and Complete list: "); 9077 scb_index = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD); 9078 i = 0; 9079 while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) { 9080 ahd_set_scbptr(ahd, scb_index); 9081 printf("%d ", scb_index); 9082 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE); 9083 } 9084 printf("\n"); 9085 ahd_set_scbptr(ahd, saved_scb_index); 9086 dffstat = ahd_inb(ahd, DFFSTAT); 9087 for (i = 0; i < 2; i++) { 9088 #ifdef AHD_DEBUG 9089 struct scb *fifo_scb; 9090 #endif 9091 u_int fifo_scbptr; 9092 9093 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i); 9094 fifo_scbptr = ahd_get_scbptr(ahd); 9095 printf("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n", 9096 ahd_name(ahd), i, 9097 (dffstat & (FIFO0FREE << i)) ? "Free" : "Active", 9098 ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr); 9099 cur_col = 0; 9100 ahd_seqimode_print(ahd_inb(ahd, SEQIMODE), &cur_col, 50); 9101 ahd_seqintsrc_print(ahd_inb(ahd, SEQINTSRC), &cur_col, 50); 9102 ahd_dfcntrl_print(ahd_inb(ahd, DFCNTRL), &cur_col, 50); 9103 ahd_dfstatus_print(ahd_inb(ahd, DFSTATUS), &cur_col, 50); 9104 ahd_sg_cache_shadow_print(ahd_inb(ahd, SG_CACHE_SHADOW), 9105 &cur_col, 50); 9106 ahd_sg_state_print(ahd_inb(ahd, SG_STATE), &cur_col, 50); 9107 ahd_dffsxfrctl_print(ahd_inb(ahd, DFFSXFRCTL), &cur_col, 50); 9108 ahd_soffcnt_print(ahd_inb(ahd, SOFFCNT), &cur_col, 50); 9109 ahd_mdffstat_print(ahd_inb(ahd, MDFFSTAT), &cur_col, 50); 9110 if (cur_col > 50) { 9111 printf("\n"); 9112 cur_col = 0; 9113 } 9114 cur_col += printf("SHADDR = 0x%x%x, SHCNT = 0x%x ", 9115 ahd_inl(ahd, SHADDR+4), 9116 ahd_inl(ahd, SHADDR), 9117 (ahd_inb(ahd, SHCNT) 9118 | (ahd_inb(ahd, SHCNT + 1) << 8) 9119 | (ahd_inb(ahd, SHCNT + 2) << 16))); 9120 if (cur_col > 50) { 9121 printf("\n"); 9122 cur_col = 0; 9123 } 9124 cur_col += printf("HADDR = 0x%x%x, HCNT = 0x%x ", 9125 ahd_inl(ahd, HADDR+4), 9126 ahd_inl(ahd, HADDR), 9127 (ahd_inb(ahd, HCNT) 9128 | (ahd_inb(ahd, HCNT + 1) << 8) 9129 | (ahd_inb(ahd, HCNT + 2) << 16))); 9130 ahd_ccsgctl_print(ahd_inb(ahd, CCSGCTL), &cur_col, 50); 9131 #ifdef AHD_DEBUG 9132 if ((ahd_debug & AHD_SHOW_SG) != 0) { 9133 fifo_scb = ahd_lookup_scb(ahd, fifo_scbptr); 9134 if (fifo_scb != NULL) 9135 ahd_dump_sglist(fifo_scb); 9136 } 9137 #endif 9138 } 9139 printf("\nLQIN: "); 9140 for (i = 0; i < 20; i++) 9141 printf("0x%x ", ahd_inb(ahd, LQIN + i)); 9142 printf("\n"); 9143 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); 9144 printf("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n", 9145 ahd_name(ahd), ahd_inb(ahd, LQISTATE), ahd_inb(ahd, LQOSTATE), 9146 ahd_inb(ahd, OPTIONMODE)); 9147 printf("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n", 9148 ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT), 9149 ahd_inb(ahd, MAXCMDCNT)); 9150 printf("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n", 9151 ahd_name(ahd), ahd_inb(ahd, SAVED_SCSIID), 9152 ahd_inb(ahd, SAVED_LUN)); 9153 ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50); 9154 printf("\n"); 9155 ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN); 9156 cur_col = 0; 9157 ahd_ccscbctl_print(ahd_inb(ahd, CCSCBCTL), &cur_col, 50); 9158 printf("\n"); 9159 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode); 9160 printf("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n", 9161 ahd_name(ahd), ahd_inw(ahd, REG0), ahd_inw(ahd, SINDEX), 9162 ahd_inw(ahd, DINDEX)); 9163 printf("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n", 9164 ahd_name(ahd), ahd_get_scbptr(ahd), 9165 ahd_inw_scbram(ahd, SCB_NEXT), 9166 ahd_inw_scbram(ahd, SCB_NEXT2)); 9167 printf("CDB %x %x %x %x %x %x\n", 9168 ahd_inb_scbram(ahd, SCB_CDB_STORE), 9169 ahd_inb_scbram(ahd, SCB_CDB_STORE+1), 9170 ahd_inb_scbram(ahd, SCB_CDB_STORE+2), 9171 ahd_inb_scbram(ahd, SCB_CDB_STORE+3), 9172 ahd_inb_scbram(ahd, SCB_CDB_STORE+4), 9173 ahd_inb_scbram(ahd, SCB_CDB_STORE+5)); 9174 printf("STACK:"); 9175 for (i = 0; i < ahd->stack_size; i++) { 9176 ahd->saved_stack[i] = 9177 ahd_inb(ahd, STACK)|(ahd_inb(ahd, STACK) << 8); 9178 printf(" 0x%x", ahd->saved_stack[i]); 9179 } 9180 for (i = ahd->stack_size-1; i >= 0; i--) { 9181 ahd_outb(ahd, STACK, ahd->saved_stack[i] & 0xFF); 9182 ahd_outb(ahd, STACK, (ahd->saved_stack[i] >> 8) & 0xFF); 9183 } 9184 printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n"); 9185 ahd_platform_dump_card_state(ahd); 9186 ahd_restore_modes(ahd, saved_modes); 9187 if (paused == 0) 9188 ahd_unpause(ahd); 9189 } 9190 9191 void 9192 ahd_dump_scbs(struct ahd_softc *ahd) 9193 { 9194 ahd_mode_state saved_modes; 9195 u_int saved_scb_index; 9196 int i; 9197 9198 saved_modes = ahd_save_modes(ahd); 9199 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9200 saved_scb_index = ahd_get_scbptr(ahd); 9201 for (i = 0; i < AHD_SCB_MAX; i++) { 9202 ahd_set_scbptr(ahd, i); 9203 printf("%3d", i); 9204 printf("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n", 9205 ahd_inb_scbram(ahd, SCB_CONTROL), 9206 ahd_inb_scbram(ahd, SCB_SCSIID), 9207 ahd_inw_scbram(ahd, SCB_NEXT), 9208 ahd_inw_scbram(ahd, SCB_NEXT2), 9209 ahd_inl_scbram(ahd, SCB_SGPTR), 9210 ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR)); 9211 } 9212 printf("\n"); 9213 ahd_set_scbptr(ahd, saved_scb_index); 9214 ahd_restore_modes(ahd, saved_modes); 9215 } 9216 9217 /*************************** Timeout Handling *********************************/ 9218 void 9219 ahd_timeout(struct scb *scb) 9220 { 9221 struct ahd_softc *ahd; 9222 9223 ahd = scb->ahd_softc; 9224 if ((scb->flags & SCB_ACTIVE) != 0) { 9225 if ((scb->flags & SCB_TIMEDOUT) == 0) { 9226 LIST_INSERT_HEAD(&ahd->timedout_scbs, scb, 9227 timedout_links); 9228 scb->flags |= SCB_TIMEDOUT; 9229 } 9230 ahd_wakeup_recovery_thread(ahd); 9231 } 9232 } 9233 9234 /* 9235 * ahd_recover_commands determines if any of the commands that have currently 9236 * timedout are the root cause for this timeout. Innocent commands are given 9237 * a new timeout while we wait for the command executing on the bus to timeout. 9238 * This routine is invoked from a thread context so we are allowed to sleep. 9239 * Our lock is not held on entry. 9240 */ 9241 void 9242 ahd_recover_commands(struct ahd_softc *ahd) 9243 { 9244 struct scb *scb; 9245 struct scb *active_scb; 9246 int found; 9247 int was_paused; 9248 u_int active_scbptr; 9249 u_int last_phase; 9250 9251 /* 9252 * Pause the controller and manually flush any 9253 * commands that have just completed but that our 9254 * interrupt handler has yet to see. 9255 */ 9256 was_paused = ahd_is_paused(ahd); 9257 9258 printf("%s: Recovery Initiated - Card was %spaused\n", ahd_name(ahd), 9259 was_paused ? "" : "not "); 9260 AHD_CORRECTABLE_ERROR(ahd); 9261 ahd_dump_card_state(ahd); 9262 9263 ahd_pause_and_flushwork(ahd); 9264 9265 if (LIST_EMPTY(&ahd->timedout_scbs) != 0) { 9266 /* 9267 * The timedout commands have already 9268 * completed. This typically means 9269 * that either the timeout value was on 9270 * the hairy edge of what the device 9271 * requires or - more likely - interrupts 9272 * are not happening. 9273 */ 9274 printf("%s: Timedout SCBs already complete. " 9275 "Interrupts may not be functioning.\n", ahd_name(ahd)); 9276 ahd_unpause(ahd); 9277 return; 9278 } 9279 9280 /* 9281 * Determine identity of SCB acting on the bus. 9282 * This test only catches non-packetized transactions. 9283 * Due to the fleeting nature of packetized operations, 9284 * we can't easily determine that a packetized operation 9285 * is on the bus. 9286 */ 9287 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); 9288 last_phase = ahd_inb(ahd, LASTPHASE); 9289 active_scbptr = ahd_get_scbptr(ahd); 9290 active_scb = NULL; 9291 if (last_phase != P_BUSFREE 9292 || (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) 9293 active_scb = ahd_lookup_scb(ahd, active_scbptr); 9294 9295 while ((scb = LIST_FIRST(&ahd->timedout_scbs)) != NULL) { 9296 int target; 9297 int lun; 9298 char channel; 9299 9300 target = SCB_GET_TARGET(ahd, scb); 9301 channel = SCB_GET_CHANNEL(ahd, scb); 9302 lun = SCB_GET_LUN(scb); 9303 9304 ahd_print_path(ahd, scb); 9305 printf("SCB %d - timed out\n", SCB_GET_TAG(scb)); 9306 9307 if (scb->flags & (SCB_DEVICE_RESET|SCB_ABORT)) { 9308 /* 9309 * Been down this road before. 9310 * Do a full bus reset. 9311 */ 9312 aic_set_transaction_status(scb, CAM_CMD_TIMEOUT); 9313 bus_reset: 9314 found = ahd_reset_channel(ahd, channel, 9315 /*Initiate Reset*/TRUE); 9316 printf("%s: Issued Channel %c Bus Reset. " 9317 "%d SCBs aborted\n", ahd_name(ahd), channel, 9318 found); 9319 continue; 9320 } 9321 9322 /* 9323 * Remove the command from the timedout list in 9324 * preparation for requeing it. 9325 */ 9326 LIST_REMOVE(scb, timedout_links); 9327 scb->flags &= ~SCB_TIMEDOUT; 9328 9329 if (active_scb != NULL) { 9330 if (active_scb != scb) { 9331 /* 9332 * If the active SCB is not us, assume that 9333 * the active SCB has a longer timeout than 9334 * the timedout SCB, and wait for the active 9335 * SCB to timeout. As a safeguard, only 9336 * allow this deferral to continue if some 9337 * untimed-out command is outstanding. 9338 */ 9339 if (ahd_other_scb_timeout(ahd, scb, 9340 active_scb) == 0) 9341 goto bus_reset; 9342 continue; 9343 } 9344 9345 /* 9346 * We're active on the bus, so assert ATN 9347 * and hope that the target responds. 9348 */ 9349 ahd_set_recoveryscb(ahd, active_scb); 9350 active_scb->flags |= SCB_RECOVERY_SCB|SCB_DEVICE_RESET; 9351 ahd_outb(ahd, MSG_OUT, HOST_MSG); 9352 ahd_outb(ahd, SCSISIGO, last_phase|ATNO); 9353 ahd_print_path(ahd, active_scb); 9354 printf("BDR message in message buffer\n"); 9355 aic_scb_timer_reset(scb, 2 * 1000); 9356 break; 9357 } else if (last_phase != P_BUSFREE 9358 && ahd_inb(ahd, SCSIPHASE) == 0) { 9359 /* 9360 * SCB is not identified, there 9361 * is no pending REQ, and the sequencer 9362 * has not seen a busfree. Looks like 9363 * a stuck connection waiting to 9364 * go busfree. Reset the bus. 9365 */ 9366 printf("%s: Connection stuck awaiting busfree or " 9367 "Identify Msg.\n", ahd_name(ahd)); 9368 goto bus_reset; 9369 } else if (ahd_search_qinfifo(ahd, target, channel, lun, 9370 SCB_GET_TAG(scb), 9371 ROLE_INITIATOR, /*status*/0, 9372 SEARCH_COUNT) > 0) { 9373 /* 9374 * We haven't even gone out on the bus 9375 * yet, so the timeout must be due to 9376 * some other command. Reset the timer 9377 * and go on. 9378 */ 9379 if (ahd_other_scb_timeout(ahd, scb, NULL) == 0) 9380 goto bus_reset; 9381 } else { 9382 /* 9383 * This SCB is for a disconnected transaction 9384 * and we haven't found a better candidate on 9385 * the bus to explain this timeout. 9386 */ 9387 ahd_set_recoveryscb(ahd, scb); 9388 9389 /* 9390 * Actually re-queue this SCB in an attempt 9391 * to select the device before it reconnects. 9392 * In either case (selection or reselection), 9393 * we will now issue a target reset to the 9394 * timed-out device. 9395 */ 9396 scb->flags |= SCB_DEVICE_RESET; 9397 scb->hscb->cdb_len = 0; 9398 scb->hscb->task_attribute = 0; 9399 scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK; 9400 9401 ahd_set_scbptr(ahd, SCB_GET_TAG(scb)); 9402 if ((scb->flags & SCB_PACKETIZED) != 0) { 9403 /* 9404 * Mark the SCB has having an outstanding 9405 * task management function. Should the command 9406 * complete normally before the task management 9407 * function can be sent, the host will be 9408 * notified to abort our requeued SCB. 9409 */ 9410 ahd_outb(ahd, SCB_TASK_MANAGEMENT, 9411 scb->hscb->task_management); 9412 } else { 9413 /* 9414 * If non-packetized, set the MK_MESSAGE control 9415 * bit indicating that we desire to send a 9416 * message. We also set the disconnected flag 9417 * since there is no guarantee that our SCB 9418 * control byte matches the version on the 9419 * card. We don't want the sequencer to abort 9420 * the command thinking an unsolicited 9421 * reselection occurred. 9422 */ 9423 scb->hscb->control |= MK_MESSAGE|DISCONNECTED; 9424 9425 /* 9426 * The sequencer will never re-reference the 9427 * in-core SCB. To make sure we are notified 9428 * during reselection, set the MK_MESSAGE flag in 9429 * the card's copy of the SCB. 9430 */ 9431 ahd_outb(ahd, SCB_CONTROL, 9432 ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE); 9433 } 9434 9435 /* 9436 * Clear out any entries in the QINFIFO first 9437 * so we are the next SCB for this target 9438 * to run. 9439 */ 9440 ahd_search_qinfifo(ahd, target, channel, lun, 9441 SCB_LIST_NULL, ROLE_INITIATOR, 9442 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 9443 ahd_qinfifo_requeue_tail(ahd, scb); 9444 ahd_set_scbptr(ahd, active_scbptr); 9445 ahd_print_path(ahd, scb); 9446 printf("Queuing a BDR SCB\n"); 9447 aic_scb_timer_reset(scb, 2 * 1000); 9448 break; 9449 } 9450 } 9451 9452 /* 9453 * Any remaining SCBs were not the "culprit", so remove 9454 * them from the timeout list. The timer for these commands 9455 * will be reset once the recovery SCB completes. 9456 */ 9457 while ((scb = LIST_FIRST(&ahd->timedout_scbs)) != NULL) { 9458 LIST_REMOVE(scb, timedout_links); 9459 scb->flags &= ~SCB_TIMEDOUT; 9460 } 9461 9462 ahd_unpause(ahd); 9463 } 9464 9465 /* 9466 * Re-schedule a timeout for the passed in SCB if we determine that some 9467 * other SCB is in the process of recovery or an SCB with a longer 9468 * timeout is still pending. Limit our search to just "other_scb" 9469 * if it is non-NULL. 9470 */ 9471 static int 9472 ahd_other_scb_timeout(struct ahd_softc *ahd, struct scb *scb, 9473 struct scb *other_scb) 9474 { 9475 u_int newtimeout; 9476 int found; 9477 9478 ahd_print_path(ahd, scb); 9479 printf("Other SCB Timeout%s", 9480 (scb->flags & SCB_OTHERTCL_TIMEOUT) != 0 9481 ? " again\n" : "\n"); 9482 9483 AHD_UNCORRECTABLE_ERROR(ahd); 9484 newtimeout = aic_get_timeout(scb); 9485 scb->flags |= SCB_OTHERTCL_TIMEOUT; 9486 found = 0; 9487 if (other_scb != NULL) { 9488 if ((other_scb->flags 9489 & (SCB_OTHERTCL_TIMEOUT|SCB_TIMEDOUT)) == 0 9490 || (other_scb->flags & SCB_RECOVERY_SCB) != 0) { 9491 found++; 9492 newtimeout = MAX(aic_get_timeout(other_scb), 9493 newtimeout); 9494 } 9495 } else { 9496 LIST_FOREACH(other_scb, &ahd->pending_scbs, pending_links) { 9497 if ((other_scb->flags 9498 & (SCB_OTHERTCL_TIMEOUT|SCB_TIMEDOUT)) == 0 9499 || (other_scb->flags & SCB_RECOVERY_SCB) != 0) { 9500 found++; 9501 newtimeout = MAX(aic_get_timeout(other_scb), 9502 newtimeout); 9503 } 9504 } 9505 } 9506 9507 if (found != 0) 9508 aic_scb_timer_reset(scb, newtimeout); 9509 else { 9510 ahd_print_path(ahd, scb); 9511 printf("No other SCB worth waiting for...\n"); 9512 } 9513 9514 return (found != 0); 9515 } 9516 9517 /**************************** Flexport Logic **********************************/ 9518 /* 9519 * Read count 16bit words from 16bit word address start_addr from the 9520 * SEEPROM attached to the controller, into buf, using the controller's 9521 * SEEPROM reading state machine. Optionally treat the data as a byte 9522 * stream in terms of byte order. 9523 */ 9524 int 9525 ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf, 9526 u_int start_addr, u_int count, int bytestream) 9527 { 9528 u_int cur_addr; 9529 u_int end_addr; 9530 int error; 9531 9532 /* 9533 * If we never make it through the loop even once, 9534 * we were passed invalid arguments. 9535 */ 9536 error = EINVAL; 9537 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9538 end_addr = start_addr + count; 9539 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 9540 ahd_outb(ahd, SEEADR, cur_addr); 9541 ahd_outb(ahd, SEECTL, SEEOP_READ | SEESTART); 9542 9543 error = ahd_wait_seeprom(ahd); 9544 if (error) 9545 break; 9546 if (bytestream != 0) { 9547 uint8_t *bytestream_ptr; 9548 9549 bytestream_ptr = (uint8_t *)buf; 9550 *bytestream_ptr++ = ahd_inb(ahd, SEEDAT); 9551 *bytestream_ptr = ahd_inb(ahd, SEEDAT+1); 9552 } else { 9553 /* 9554 * ahd_inw() already handles machine byte order. 9555 */ 9556 *buf = ahd_inw(ahd, SEEDAT); 9557 } 9558 buf++; 9559 } 9560 return (error); 9561 } 9562 9563 /* 9564 * Write count 16bit words from buf, into SEEPROM attache to the 9565 * controller starting at 16bit word address start_addr, using the 9566 * controller's SEEPROM writing state machine. 9567 */ 9568 int 9569 ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf, 9570 u_int start_addr, u_int count) 9571 { 9572 u_int cur_addr; 9573 u_int end_addr; 9574 int error; 9575 int retval; 9576 9577 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9578 error = ENOENT; 9579 9580 /* Place the chip into write-enable mode */ 9581 ahd_outb(ahd, SEEADR, SEEOP_EWEN_ADDR); 9582 ahd_outb(ahd, SEECTL, SEEOP_EWEN | SEESTART); 9583 error = ahd_wait_seeprom(ahd); 9584 if (error) 9585 return (error); 9586 9587 /* 9588 * Write the data. If we don't get through the loop at 9589 * least once, the arguments were invalid. 9590 */ 9591 retval = EINVAL; 9592 end_addr = start_addr + count; 9593 for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) { 9594 ahd_outw(ahd, SEEDAT, *buf++); 9595 ahd_outb(ahd, SEEADR, cur_addr); 9596 ahd_outb(ahd, SEECTL, SEEOP_WRITE | SEESTART); 9597 9598 retval = ahd_wait_seeprom(ahd); 9599 if (retval) 9600 break; 9601 } 9602 9603 /* 9604 * Disable writes. 9605 */ 9606 ahd_outb(ahd, SEEADR, SEEOP_EWDS_ADDR); 9607 ahd_outb(ahd, SEECTL, SEEOP_EWDS | SEESTART); 9608 error = ahd_wait_seeprom(ahd); 9609 if (error) 9610 return (error); 9611 return (retval); 9612 } 9613 9614 /* 9615 * Wait ~100us for the serial eeprom to satisfy our request. 9616 */ 9617 int 9618 ahd_wait_seeprom(struct ahd_softc *ahd) 9619 { 9620 int cnt; 9621 9622 cnt = 5000; 9623 while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt) 9624 aic_delay(5); 9625 9626 if (cnt == 0) 9627 return (ETIMEDOUT); 9628 return (0); 9629 } 9630 9631 /* 9632 * Validate the two checksums in the per_channel 9633 * vital product data struct. 9634 */ 9635 int 9636 ahd_verify_vpd_cksum(struct vpd_config *vpd) 9637 { 9638 int i; 9639 int maxaddr; 9640 uint32_t checksum; 9641 uint8_t *vpdarray; 9642 9643 vpdarray = (uint8_t *)vpd; 9644 maxaddr = offsetof(struct vpd_config, vpd_checksum); 9645 checksum = 0; 9646 for (i = offsetof(struct vpd_config, resource_type); i < maxaddr; i++) 9647 checksum = checksum + vpdarray[i]; 9648 if (checksum == 0 9649 || (-checksum & 0xFF) != vpd->vpd_checksum) 9650 return (0); 9651 9652 checksum = 0; 9653 maxaddr = offsetof(struct vpd_config, checksum); 9654 for (i = offsetof(struct vpd_config, default_target_flags); 9655 i < maxaddr; i++) 9656 checksum = checksum + vpdarray[i]; 9657 if (checksum == 0 9658 || (-checksum & 0xFF) != vpd->checksum) 9659 return (0); 9660 return (1); 9661 } 9662 9663 int 9664 ahd_verify_cksum(struct seeprom_config *sc) 9665 { 9666 int i; 9667 int maxaddr; 9668 uint32_t checksum; 9669 uint16_t *scarray; 9670 9671 maxaddr = (sizeof(*sc)/2) - 1; 9672 checksum = 0; 9673 scarray = (uint16_t *)sc; 9674 9675 for (i = 0; i < maxaddr; i++) 9676 checksum = checksum + scarray[i]; 9677 if (checksum == 0 9678 || (checksum & 0xFFFF) != sc->checksum) { 9679 return (0); 9680 } else { 9681 return (1); 9682 } 9683 } 9684 9685 int 9686 ahd_acquire_seeprom(struct ahd_softc *ahd) 9687 { 9688 /* 9689 * We should be able to determine the SEEPROM type 9690 * from the flexport logic, but unfortunately not 9691 * all implementations have this logic and there is 9692 * no programatic method for determining if the logic 9693 * is present. 9694 */ 9695 return (1); 9696 #if 0 9697 uint8_t seetype; 9698 int error; 9699 9700 error = ahd_read_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, &seetype); 9701 if (error != 0 9702 || ((seetype & FLX_ROMSTAT_SEECFG) == FLX_ROMSTAT_SEE_NONE)) 9703 return (0); 9704 return (1); 9705 #endif 9706 } 9707 9708 void 9709 ahd_release_seeprom(struct ahd_softc *ahd) 9710 { 9711 /* Currently a no-op */ 9712 } 9713 9714 int 9715 ahd_write_flexport(struct ahd_softc *ahd, u_int addr, u_int value) 9716 { 9717 int error; 9718 9719 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9720 if (addr > 7) 9721 panic("ahd_write_flexport: address out of range"); 9722 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9723 error = ahd_wait_flexport(ahd); 9724 if (error != 0) 9725 return (error); 9726 ahd_outb(ahd, BRDDAT, value); 9727 ahd_flush_device_writes(ahd); 9728 ahd_outb(ahd, BRDCTL, BRDSTB|BRDEN|(addr << 3)); 9729 ahd_flush_device_writes(ahd); 9730 ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3)); 9731 ahd_flush_device_writes(ahd); 9732 ahd_outb(ahd, BRDCTL, 0); 9733 ahd_flush_device_writes(ahd); 9734 return (0); 9735 } 9736 9737 int 9738 ahd_read_flexport(struct ahd_softc *ahd, u_int addr, uint8_t *value) 9739 { 9740 int error; 9741 9742 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9743 if (addr > 7) 9744 panic("ahd_read_flexport: address out of range"); 9745 ahd_outb(ahd, BRDCTL, BRDRW|BRDEN|(addr << 3)); 9746 error = ahd_wait_flexport(ahd); 9747 if (error != 0) 9748 return (error); 9749 *value = ahd_inb(ahd, BRDDAT); 9750 ahd_outb(ahd, BRDCTL, 0); 9751 ahd_flush_device_writes(ahd); 9752 return (0); 9753 } 9754 9755 /* 9756 * Wait at most 2 seconds for flexport arbitration to succeed. 9757 */ 9758 int 9759 ahd_wait_flexport(struct ahd_softc *ahd) 9760 { 9761 int cnt; 9762 9763 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK); 9764 cnt = 1000000 * 2 / 5; 9765 while ((ahd_inb(ahd, BRDCTL) & FLXARBACK) == 0 && --cnt) 9766 aic_delay(5); 9767 9768 if (cnt == 0) 9769 return (ETIMEDOUT); 9770 return (0); 9771 } 9772 9773 /************************* Target Mode ****************************************/ 9774 #ifdef AHD_TARGET_MODE 9775 cam_status 9776 ahd_find_tmode_devs(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb, 9777 struct ahd_tmode_tstate **tstate, 9778 struct ahd_tmode_lstate **lstate, 9779 int notfound_failure) 9780 { 9781 9782 if ((ahd->features & AHD_TARGETMODE) == 0) 9783 return (CAM_REQ_INVALID); 9784 9785 /* 9786 * Handle the 'black hole' device that sucks up 9787 * requests to unattached luns on enabled targets. 9788 */ 9789 if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD 9790 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) { 9791 *tstate = NULL; 9792 *lstate = ahd->black_hole; 9793 } else { 9794 u_int max_id; 9795 9796 max_id = (ahd->features & AHD_WIDE) ? 15 : 7; 9797 if (ccb->ccb_h.target_id > max_id) 9798 return (CAM_TID_INVALID); 9799 9800 if (ccb->ccb_h.target_lun >= AHD_NUM_LUNS) 9801 return (CAM_LUN_INVALID); 9802 9803 *tstate = ahd->enabled_targets[ccb->ccb_h.target_id]; 9804 *lstate = NULL; 9805 if (*tstate != NULL) 9806 *lstate = 9807 (*tstate)->enabled_luns[ccb->ccb_h.target_lun]; 9808 } 9809 9810 if (notfound_failure != 0 && *lstate == NULL) 9811 return (CAM_PATH_INVALID); 9812 9813 return (CAM_REQ_CMP); 9814 } 9815 9816 void 9817 ahd_handle_en_lun(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb) 9818 { 9819 #if NOT_YET 9820 struct ahd_tmode_tstate *tstate; 9821 struct ahd_tmode_lstate *lstate; 9822 struct ccb_en_lun *cel; 9823 union ccb *cancel_ccb; 9824 cam_status status; 9825 u_int target; 9826 u_int lun; 9827 u_int target_mask; 9828 u_long s; 9829 char channel; 9830 9831 status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate, &lstate, 9832 /*notfound_failure*/FALSE); 9833 9834 if (status != CAM_REQ_CMP) { 9835 ccb->ccb_h.status = status; 9836 return; 9837 } 9838 9839 if ((ahd->features & AHD_MULTIROLE) != 0) { 9840 u_int our_id; 9841 9842 our_id = ahd->our_id; 9843 if (ccb->ccb_h.target_id != our_id 9844 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 9845 if ((ahd->features & AHD_MULTI_TID) != 0 9846 && (ahd->flags & AHD_INITIATORROLE) != 0) { 9847 /* 9848 * Only allow additional targets if 9849 * the initiator role is disabled. 9850 * The hardware cannot handle a re-select-in 9851 * on the initiator id during a re-select-out 9852 * on a different target id. 9853 */ 9854 status = CAM_TID_INVALID; 9855 } else if ((ahd->flags & AHD_INITIATORROLE) != 0 9856 || ahd->enabled_luns > 0) { 9857 /* 9858 * Only allow our target id to change 9859 * if the initiator role is not configured 9860 * and there are no enabled luns which 9861 * are attached to the currently registered 9862 * scsi id. 9863 */ 9864 status = CAM_TID_INVALID; 9865 } 9866 } 9867 } 9868 9869 if (status != CAM_REQ_CMP) { 9870 ccb->ccb_h.status = status; 9871 return; 9872 } 9873 9874 /* 9875 * We now have an id that is valid. 9876 * If we aren't in target mode, switch modes. 9877 */ 9878 if ((ahd->flags & AHD_TARGETROLE) == 0 9879 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 9880 printf("Configuring Target Mode\n"); 9881 if (LIST_FIRST(&ahd->pending_scbs) != NULL) { 9882 ccb->ccb_h.status = CAM_BUSY; 9883 return; 9884 } 9885 ahd->flags |= AHD_TARGETROLE; 9886 if ((ahd->features & AHD_MULTIROLE) == 0) 9887 ahd->flags &= ~AHD_INITIATORROLE; 9888 ahd_pause(ahd); 9889 ahd_loadseq(ahd); 9890 ahd_restart(ahd); 9891 } 9892 cel = &ccb->cel; 9893 target = ccb->ccb_h.target_id; 9894 lun = ccb->ccb_h.target_lun; 9895 channel = SIM_CHANNEL(ahd, sim); 9896 target_mask = 0x01 << target; 9897 if (channel == 'B') 9898 target_mask <<= 8; 9899 9900 if (cel->enable != 0) { 9901 u_int scsiseq1; 9902 9903 /* Are we already enabled?? */ 9904 if (lstate != NULL) { 9905 xpt_print_path(ccb->ccb_h.path); 9906 printf("Lun already enabled\n"); 9907 AHD_CORRECTABLE_ERROR(ahd); 9908 ccb->ccb_h.status = CAM_LUN_ALRDY_ENA; 9909 return; 9910 } 9911 9912 if (cel->grp6_len != 0 9913 || cel->grp7_len != 0) { 9914 /* 9915 * Don't (yet?) support vendor 9916 * specific commands. 9917 */ 9918 ccb->ccb_h.status = CAM_REQ_INVALID; 9919 printf("Non-zero Group Codes\n"); 9920 return; 9921 } 9922 9923 /* 9924 * Seems to be okay. 9925 * Setup our data structures. 9926 */ 9927 if (target != CAM_TARGET_WILDCARD && tstate == NULL) { 9928 tstate = ahd_alloc_tstate(ahd, target, channel); 9929 if (tstate == NULL) { 9930 xpt_print_path(ccb->ccb_h.path); 9931 printf("Couldn't allocate tstate\n"); 9932 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9933 return; 9934 } 9935 } 9936 lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT); 9937 if (lstate == NULL) { 9938 xpt_print_path(ccb->ccb_h.path); 9939 printf("Couldn't allocate lstate\n"); 9940 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9941 return; 9942 } 9943 memset(lstate, 0, sizeof(*lstate)); 9944 status = xpt_create_path(&lstate->path, /*periph*/NULL, 9945 xpt_path_path_id(ccb->ccb_h.path), 9946 xpt_path_target_id(ccb->ccb_h.path), 9947 xpt_path_lun_id(ccb->ccb_h.path)); 9948 if (status != CAM_REQ_CMP) { 9949 free(lstate, M_DEVBUF); 9950 xpt_print_path(ccb->ccb_h.path); 9951 printf("Couldn't allocate path\n"); 9952 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 9953 return; 9954 } 9955 SLIST_INIT(&lstate->accept_tios); 9956 SLIST_INIT(&lstate->immed_notifies); 9957 ahd_pause(ahd); 9958 if (target != CAM_TARGET_WILDCARD) { 9959 tstate->enabled_luns[lun] = lstate; 9960 ahd->enabled_luns++; 9961 9962 if ((ahd->features & AHD_MULTI_TID) != 0) { 9963 u_int targid_mask; 9964 9965 targid_mask = ahd_inw(ahd, TARGID); 9966 targid_mask |= target_mask; 9967 ahd_outw(ahd, TARGID, targid_mask); 9968 ahd_update_scsiid(ahd, targid_mask); 9969 } else { 9970 u_int our_id; 9971 char channel; 9972 9973 channel = SIM_CHANNEL(ahd, sim); 9974 our_id = SIM_SCSI_ID(ahd, sim); 9975 9976 /* 9977 * This can only happen if selections 9978 * are not enabled 9979 */ 9980 if (target != our_id) { 9981 u_int sblkctl; 9982 char cur_channel; 9983 int swap; 9984 9985 sblkctl = ahd_inb(ahd, SBLKCTL); 9986 cur_channel = (sblkctl & SELBUSB) 9987 ? 'B' : 'A'; 9988 if ((ahd->features & AHD_TWIN) == 0) 9989 cur_channel = 'A'; 9990 swap = cur_channel != channel; 9991 ahd->our_id = target; 9992 9993 if (swap) 9994 ahd_outb(ahd, SBLKCTL, 9995 sblkctl ^ SELBUSB); 9996 9997 ahd_outb(ahd, SCSIID, target); 9998 9999 if (swap) 10000 ahd_outb(ahd, SBLKCTL, sblkctl); 10001 } 10002 } 10003 } else 10004 ahd->black_hole = lstate; 10005 /* Allow select-in operations */ 10006 if (ahd->black_hole != NULL && ahd->enabled_luns > 0) { 10007 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 10008 scsiseq1 |= ENSELI; 10009 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 10010 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 10011 scsiseq1 |= ENSELI; 10012 ahd_outb(ahd, SCSISEQ1, scsiseq1); 10013 } 10014 ahd_unpause(ahd); 10015 ccb->ccb_h.status = CAM_REQ_CMP; 10016 xpt_print_path(ccb->ccb_h.path); 10017 printf("Lun now enabled for target mode\n"); 10018 } else { 10019 struct scb *scb; 10020 int i, empty; 10021 10022 if (lstate == NULL) { 10023 ccb->ccb_h.status = CAM_LUN_INVALID; 10024 return; 10025 } 10026 10027 ccb->ccb_h.status = CAM_REQ_CMP; 10028 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) { 10029 struct ccb_hdr *ccbh; 10030 10031 ccbh = &scb->io_ctx->ccb_h; 10032 if (ccbh->func_code == XPT_CONT_TARGET_IO 10033 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){ 10034 printf("CTIO pending\n"); 10035 ccb->ccb_h.status = CAM_REQ_INVALID; 10036 return; 10037 } 10038 } 10039 10040 if (SLIST_FIRST(&lstate->accept_tios) != NULL) { 10041 printf("ATIOs pending\n"); 10042 while ((cancel_ccb = (union ccb *)SLIST_FIRST(&lstate->accept_tios)) != NULL) { 10043 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle); 10044 cancel_ccb->ccb_h.status = CAM_REQ_ABORTED; 10045 xpt_done(cancel_ccb); 10046 }; 10047 } 10048 10049 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) { 10050 printf("INOTs pending\n"); 10051 while ((cancel_ccb = (union ccb *)SLIST_FIRST(&lstate->immed_notifies)) != NULL) { 10052 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle); 10053 cancel_ccb->ccb_h.status = CAM_REQ_ABORTED; 10054 xpt_done(cancel_ccb); 10055 }; 10056 } 10057 10058 if (ccb->ccb_h.status != CAM_REQ_CMP) { 10059 return; 10060 } 10061 10062 xpt_print_path(ccb->ccb_h.path); 10063 printf("Target mode disabled\n"); 10064 xpt_free_path(lstate->path); 10065 free(lstate, M_DEVBUF); 10066 10067 ahd_pause(ahd); 10068 /* Can we clean up the target too? */ 10069 if (target != CAM_TARGET_WILDCARD) { 10070 tstate->enabled_luns[lun] = NULL; 10071 ahd->enabled_luns--; 10072 for (empty = 1, i = 0; i < 8; i++) 10073 if (tstate->enabled_luns[i] != NULL) { 10074 empty = 0; 10075 break; 10076 } 10077 10078 if (empty) { 10079 ahd_free_tstate(ahd, target, channel, 10080 /*force*/FALSE); 10081 if (ahd->features & AHD_MULTI_TID) { 10082 u_int targid_mask; 10083 10084 targid_mask = ahd_inw(ahd, TARGID); 10085 targid_mask &= ~target_mask; 10086 ahd_outw(ahd, TARGID, targid_mask); 10087 ahd_update_scsiid(ahd, targid_mask); 10088 } 10089 } 10090 } else { 10091 ahd->black_hole = NULL; 10092 10093 /* 10094 * We can't allow selections without 10095 * our black hole device. 10096 */ 10097 empty = TRUE; 10098 } 10099 if (ahd->enabled_luns == 0) { 10100 /* Disallow select-in */ 10101 u_int scsiseq1; 10102 10103 scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE); 10104 scsiseq1 &= ~ENSELI; 10105 ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1); 10106 scsiseq1 = ahd_inb(ahd, SCSISEQ1); 10107 scsiseq1 &= ~ENSELI; 10108 ahd_outb(ahd, SCSISEQ1, scsiseq1); 10109 10110 if ((ahd->features & AHD_MULTIROLE) == 0) { 10111 printf("Configuring Initiator Mode\n"); 10112 ahd->flags &= ~AHD_TARGETROLE; 10113 ahd->flags |= AHD_INITIATORROLE; 10114 ahd_pause(ahd); 10115 ahd_loadseq(ahd); 10116 ahd_restart(ahd); 10117 /* 10118 * Unpaused. The extra unpause 10119 * that follows is harmless. 10120 */ 10121 } 10122 } 10123 ahd_unpause(ahd); 10124 } 10125 #endif 10126 } 10127 10128 static void 10129 ahd_update_scsiid(struct ahd_softc *ahd, u_int targid_mask) 10130 { 10131 #if NOT_YET 10132 u_int scsiid_mask; 10133 u_int scsiid; 10134 10135 if ((ahd->features & AHD_MULTI_TID) == 0) 10136 panic("ahd_update_scsiid called on non-multitid unit\n"); 10137 10138 /* 10139 * Since we will rely on the TARGID mask 10140 * for selection enables, ensure that OID 10141 * in SCSIID is not set to some other ID 10142 * that we don't want to allow selections on. 10143 */ 10144 if ((ahd->features & AHD_ULTRA2) != 0) 10145 scsiid = ahd_inb(ahd, SCSIID_ULTRA2); 10146 else 10147 scsiid = ahd_inb(ahd, SCSIID); 10148 scsiid_mask = 0x1 << (scsiid & OID); 10149 if ((targid_mask & scsiid_mask) == 0) { 10150 u_int our_id; 10151 10152 /* ffs counts from 1 */ 10153 our_id = ffs(targid_mask); 10154 if (our_id == 0) 10155 our_id = ahd->our_id; 10156 else 10157 our_id--; 10158 scsiid &= TID; 10159 scsiid |= our_id; 10160 } 10161 if ((ahd->features & AHD_ULTRA2) != 0) 10162 ahd_outb(ahd, SCSIID_ULTRA2, scsiid); 10163 else 10164 ahd_outb(ahd, SCSIID, scsiid); 10165 #endif 10166 } 10167 10168 void 10169 ahd_run_tqinfifo(struct ahd_softc *ahd, int paused) 10170 { 10171 struct target_cmd *cmd; 10172 10173 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_POSTREAD); 10174 while ((cmd = &ahd->targetcmds[ahd->tqinfifonext])->cmd_valid != 0) { 10175 /* 10176 * Only advance through the queue if we 10177 * have the resources to process the command. 10178 */ 10179 if (ahd_handle_target_cmd(ahd, cmd) != 0) 10180 break; 10181 10182 cmd->cmd_valid = 0; 10183 ahd_dmamap_sync(ahd, ahd->shared_data_dmat, 10184 ahd->shared_data_dmamap, 10185 ahd_targetcmd_offset(ahd, ahd->tqinfifonext), 10186 sizeof(struct target_cmd), 10187 BUS_DMASYNC_PREREAD); 10188 ahd->tqinfifonext++; 10189 10190 /* 10191 * Lazily update our position in the target mode incoming 10192 * command queue as seen by the sequencer. 10193 */ 10194 if ((ahd->tqinfifonext & (HOST_TQINPOS - 1)) == 1) { 10195 u_int hs_mailbox; 10196 10197 hs_mailbox = ahd_inb(ahd, HS_MAILBOX); 10198 hs_mailbox &= ~HOST_TQINPOS; 10199 hs_mailbox |= ahd->tqinfifonext & HOST_TQINPOS; 10200 ahd_outb(ahd, HS_MAILBOX, hs_mailbox); 10201 } 10202 } 10203 } 10204 10205 static int 10206 ahd_handle_target_cmd(struct ahd_softc *ahd, struct target_cmd *cmd) 10207 { 10208 struct ahd_tmode_tstate *tstate; 10209 struct ahd_tmode_lstate *lstate; 10210 struct ccb_accept_tio *atio; 10211 uint8_t *byte; 10212 int initiator; 10213 int target; 10214 int lun; 10215 10216 initiator = SCSIID_TARGET(ahd, cmd->scsiid); 10217 target = SCSIID_OUR_ID(cmd->scsiid); 10218 lun = (cmd->identify & MSG_IDENTIFY_LUNMASK); 10219 10220 byte = cmd->bytes; 10221 tstate = ahd->enabled_targets[target]; 10222 lstate = NULL; 10223 if (tstate != NULL) 10224 lstate = tstate->enabled_luns[lun]; 10225 10226 /* 10227 * Commands for disabled luns go to the black hole driver. 10228 */ 10229 if (lstate == NULL) 10230 lstate = ahd->black_hole; 10231 10232 atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios); 10233 if (atio == NULL) { 10234 ahd->flags |= AHD_TQINFIFO_BLOCKED; 10235 /* 10236 * Wait for more ATIOs from the peripheral driver for this lun. 10237 */ 10238 return (1); 10239 } else 10240 ahd->flags &= ~AHD_TQINFIFO_BLOCKED; 10241 #ifdef AHD_DEBUG 10242 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 10243 printf("Incoming command from %d for %d:%d%s\n", 10244 initiator, target, lun, 10245 lstate == ahd->black_hole ? "(Black Holed)" : ""); 10246 #endif 10247 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle); 10248 10249 if (lstate == ahd->black_hole) { 10250 /* Fill in the wildcards */ 10251 atio->ccb_h.target_id = target; 10252 atio->ccb_h.target_lun = lun; 10253 } 10254 10255 /* 10256 * Package it up and send it off to 10257 * whomever has this lun enabled. 10258 */ 10259 atio->sense_len = 0; 10260 atio->init_id = initiator; 10261 if (byte[0] != 0xFF) { 10262 /* Tag was included */ 10263 atio->tag_action = *byte++; 10264 atio->tag_id = *byte++; 10265 atio->ccb_h.flags |= CAM_TAG_ACTION_VALID; 10266 } else { 10267 atio->ccb_h.flags &= ~CAM_TAG_ACTION_VALID; 10268 } 10269 byte++; 10270 10271 /* Okay. Now determine the cdb size based on the command code */ 10272 switch (*byte >> CMD_GROUP_CODE_SHIFT) { 10273 case 0: 10274 atio->cdb_len = 6; 10275 break; 10276 case 1: 10277 case 2: 10278 atio->cdb_len = 10; 10279 break; 10280 case 4: 10281 atio->cdb_len = 16; 10282 break; 10283 case 5: 10284 atio->cdb_len = 12; 10285 break; 10286 case 3: 10287 default: 10288 /* Only copy the opcode. */ 10289 atio->cdb_len = 1; 10290 printf("Reserved or VU command code type encountered\n"); 10291 break; 10292 } 10293 10294 memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len); 10295 10296 atio->ccb_h.status |= CAM_CDB_RECVD; 10297 10298 if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) { 10299 /* 10300 * We weren't allowed to disconnect. 10301 * We're hanging on the bus until a 10302 * continue target I/O comes in response 10303 * to this accept tio. 10304 */ 10305 #ifdef AHD_DEBUG 10306 if ((ahd_debug & AHD_SHOW_TQIN) != 0) 10307 printf("Received Immediate Command %d:%d:%d - %p\n", 10308 initiator, target, lun, ahd->pending_device); 10309 #endif 10310 ahd->pending_device = lstate; 10311 ahd_freeze_ccb((union ccb *)atio); 10312 atio->ccb_h.flags |= CAM_DIS_DISCONNECT; 10313 } else { 10314 atio->ccb_h.flags &= ~CAM_DIS_DISCONNECT; 10315 } 10316 10317 xpt_done((union ccb*)atio); 10318 return (0); 10319 } 10320 10321 #endif 10322