xref: /freebsd/sys/dev/aic7xxx/aic7770.c (revision 62cfcf62f627e5093fb37026a6d8c98e4d2ef04c)
1 /*-
2  * Product specific probe and attach routines for:
3  * 	27/284X and aic7770 motherboard SCSI controllers
4  *
5  * SPDX-License-Identifier: BSD-3-Clause
6  *
7  * Copyright (c) 1994-1998, 2000, 2001 Justin T. Gibbs.
8  * All rights reserved.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions, and the following disclaimer,
15  *    without modification.
16  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
17  *    substantially similar to the "NO WARRANTY" disclaimer below
18  *    ("Disclaimer") and any redistribution must be conditioned upon
19  *    including a substantially similar Disclaimer requirement for further
20  *    binary redistribution.
21  * 3. Neither the names of the above-listed copyright holders nor the names
22  *    of any contributors may be used to endorse or promote products derived
23  *    from this software without specific prior written permission.
24  *
25  * Alternatively, this software may be distributed under the terms of the
26  * GNU General Public License ("GPL") version 2 as published by the Free
27  * Software Foundation.
28  *
29  * NO WARRANTY
30  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
31  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
32  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
33  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
34  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
36  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
37  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
38  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
39  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
40  * POSSIBILITY OF SUCH DAMAGES.
41  *
42  * $Id: //depot/aic7xxx/aic7xxx/aic7770.c#34 $
43  */
44 
45 #ifdef __linux__
46 #include "aic7xxx_osm.h"
47 #include "aic7xxx_inline.h"
48 #include "aic7xxx_93cx6.h"
49 #else
50 #include <sys/cdefs.h>
51 __FBSDID("$FreeBSD$");
52 #include <dev/aic7xxx/aic7xxx_osm.h>
53 #include <dev/aic7xxx/aic7xxx_inline.h>
54 #include <dev/aic7xxx/aic7xxx_93cx6.h>
55 #endif
56 
57 #define ID_AIC7770	0x04907770
58 #define ID_AHA_274x	0x04907771
59 #define ID_AHA_284xB	0x04907756 /* BIOS enabled */
60 #define ID_AHA_284x	0x04907757 /* BIOS disabled*/
61 #define	ID_OLV_274x	0x04907782 /* Olivetti OEM */
62 #define	ID_OLV_274xD	0x04907783 /* Olivetti OEM (Differential) */
63 
64 static int aic7770_chip_init(struct ahc_softc *ahc);
65 static int aic7770_suspend(struct ahc_softc *ahc);
66 static int aic7770_resume(struct ahc_softc *ahc);
67 static int aha2840_load_seeprom(struct ahc_softc *ahc);
68 static ahc_device_setup_t ahc_aic7770_VL_setup;
69 static ahc_device_setup_t ahc_aic7770_EISA_setup;	/* Really just ISA */
70 static ahc_device_setup_t ahc_aic7770_setup;
71 
72 struct aic7770_identity aic7770_ident_table[] =
73 {
74 	{
75 		ID_AHA_274x,
76 		0xFFFFFFFF,
77 		"Adaptec 274X SCSI adapter",
78 		ahc_aic7770_EISA_setup
79 	},
80 	{
81 		ID_AHA_284xB,
82 		0xFFFFFFFE,
83 		"Adaptec 284X SCSI adapter",
84 		ahc_aic7770_VL_setup
85 	},
86 	{
87 		ID_AHA_284x,
88 		0xFFFFFFFE,
89 		"Adaptec 284X SCSI adapter (BIOS Disabled)",
90 		ahc_aic7770_VL_setup
91 	},
92 	{
93 		ID_OLV_274x,
94 		0xFFFFFFFF,
95 		"Adaptec (Olivetti OEM) 274X SCSI adapter",
96 		ahc_aic7770_EISA_setup
97 	},
98 	{
99 		ID_OLV_274xD,
100 		0xFFFFFFFF,
101 		"Adaptec (Olivetti OEM) 274X Differential SCSI adapter",
102 		ahc_aic7770_EISA_setup
103 	},
104 	/* Generic chip probes for devices we don't know 'exactly' */
105 	{
106 		ID_AIC7770,
107 		0xFFFFFFFF,
108 		"Adaptec aic7770 SCSI adapter",
109 		ahc_aic7770_EISA_setup
110 	}
111 };
112 const int ahc_num_aic7770_devs = NUM_ELEMENTS(aic7770_ident_table);
113 
114 struct aic7770_identity *
115 aic7770_find_device(uint32_t id)
116 {
117 	struct	aic7770_identity *entry;
118 	int	i;
119 
120 	for (i = 0; i < ahc_num_aic7770_devs; i++) {
121 		entry = &aic7770_ident_table[i];
122 		if (entry->full_id == (id & entry->id_mask))
123 			return (entry);
124 	}
125 	return (NULL);
126 }
127 
128 int
129 aic7770_config(struct ahc_softc *ahc, struct aic7770_identity *entry, u_int io)
130 {
131 	int	error;
132 	int	have_seeprom;
133 	u_int	hostconf;
134 	u_int   irq;
135 	u_int	intdef;
136 
137 	error = entry->setup(ahc);
138 	have_seeprom = 0;
139 	if (error != 0)
140 		return (error);
141 
142 	error = aic7770_map_registers(ahc, io);
143 	if (error != 0)
144 		return (error);
145 
146 	/*
147 	 * Before we continue probing the card, ensure that
148 	 * its interrupts are *disabled*.  We don't want
149 	 * a misstep to hang the machine in an interrupt
150 	 * storm.
151 	 */
152 	ahc_intr_enable(ahc, FALSE);
153 
154 	ahc->description = entry->name;
155 	error = ahc_softc_init(ahc);
156 	if (error != 0)
157 		return (error);
158 
159 	ahc->bus_chip_init = aic7770_chip_init;
160 	ahc->bus_suspend = aic7770_suspend;
161 	ahc->bus_resume = aic7770_resume;
162 
163 	error = ahc_reset(ahc, /*reinit*/FALSE);
164 	if (error != 0)
165 		return (error);
166 
167 	/* Make sure we have a valid interrupt vector */
168 	intdef = ahc_inb(ahc, INTDEF);
169 	irq = intdef & VECTOR;
170 	switch (irq) {
171 	case 9:
172 	case 10:
173 	case 11:
174 	case 12:
175 	case 14:
176 	case 15:
177 		break;
178 	default:
179 		printf("aic7770_config: invalid irq setting %d\n", intdef);
180 		return (ENXIO);
181 	}
182 
183 	if ((intdef & EDGE_TRIG) != 0)
184 		ahc->flags |= AHC_EDGE_INTERRUPT;
185 
186 	switch (ahc->chip & (AHC_EISA|AHC_VL)) {
187 	case AHC_EISA:
188 	{
189 		u_int biosctrl;
190 		u_int scsiconf;
191 		u_int scsiconf1;
192 
193 		biosctrl = ahc_inb(ahc, HA_274_BIOSCTRL);
194 		scsiconf = ahc_inb(ahc, SCSICONF);
195 		scsiconf1 = ahc_inb(ahc, SCSICONF + 1);
196 
197 		/* Get the primary channel information */
198 		if ((biosctrl & CHANNEL_B_PRIMARY) != 0)
199 			ahc->flags |= 1;
200 
201 		if ((biosctrl & BIOSMODE) == BIOSDISABLED) {
202 			ahc->flags |= AHC_USEDEFAULTS;
203 		} else {
204 			if ((ahc->features & AHC_WIDE) != 0) {
205 				ahc->our_id = scsiconf1 & HWSCSIID;
206 				if (scsiconf & TERM_ENB)
207 					ahc->flags |= AHC_TERM_ENB_A;
208 			} else {
209 				ahc->our_id = scsiconf & HSCSIID;
210 				ahc->our_id_b = scsiconf1 & HSCSIID;
211 				if (scsiconf & TERM_ENB)
212 					ahc->flags |= AHC_TERM_ENB_A;
213 				if (scsiconf1 & TERM_ENB)
214 					ahc->flags |= AHC_TERM_ENB_B;
215 			}
216 		}
217 		if ((ahc_inb(ahc, HA_274_BIOSGLOBAL) & HA_274_EXTENDED_TRANS))
218 			ahc->flags |= AHC_EXTENDED_TRANS_A|AHC_EXTENDED_TRANS_B;
219 		break;
220 	}
221 	case AHC_VL:
222 	{
223 		have_seeprom = aha2840_load_seeprom(ahc);
224 		break;
225 	}
226 	default:
227 		break;
228 	}
229 	if (have_seeprom == 0) {
230 		free(ahc->seep_config, M_DEVBUF);
231 		ahc->seep_config = NULL;
232 	}
233 
234 	/*
235 	 * Ensure autoflush is enabled
236 	 */
237 	ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~AUTOFLUSHDIS);
238 
239 	/* Setup the FIFO threshold and the bus off time */
240 	hostconf = ahc_inb(ahc, HOSTCONF);
241 	ahc_outb(ahc, BUSSPD, hostconf & DFTHRSH);
242 	ahc_outb(ahc, BUSTIME, (hostconf << 2) & BOFF);
243 
244 	ahc->bus_softc.aic7770_softc.busspd = hostconf & DFTHRSH;
245 	ahc->bus_softc.aic7770_softc.bustime = (hostconf << 2) & BOFF;
246 
247 	/*
248 	 * Generic aic7xxx initialization.
249 	 */
250 	error = ahc_init(ahc);
251 	if (error != 0)
252 		return (error);
253 
254 	error = aic7770_map_int(ahc, irq);
255 	if (error != 0)
256 		return (error);
257 
258 	ahc_lock(ahc);
259 	/*
260 	 * Link this softc in with all other ahc instances.
261 	 */
262 	ahc_softc_insert(ahc);
263 
264 	/*
265 	 * Enable the board's BUS drivers
266 	 */
267 	ahc_outb(ahc, BCTL, ENABLE);
268 
269 	ahc_unlock(ahc);
270 
271 	return (0);
272 }
273 
274 static int
275 aic7770_chip_init(struct ahc_softc *ahc)
276 {
277 	ahc_outb(ahc, BUSSPD, ahc->bus_softc.aic7770_softc.busspd);
278 	ahc_outb(ahc, BUSTIME, ahc->bus_softc.aic7770_softc.bustime);
279 	ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~AUTOFLUSHDIS);
280 	ahc_outb(ahc, BCTL, ENABLE);
281 	return (ahc_chip_init(ahc));
282 }
283 
284 static int
285 aic7770_suspend(struct ahc_softc *ahc)
286 {
287 	return (ahc_suspend(ahc));
288 }
289 
290 static int
291 aic7770_resume(struct ahc_softc *ahc)
292 {
293 	return (ahc_resume(ahc));
294 }
295 
296 /*
297  * Read the 284x SEEPROM.
298  */
299 static int
300 aha2840_load_seeprom(struct ahc_softc *ahc)
301 {
302 	struct	seeprom_descriptor sd;
303 	struct	seeprom_config *sc;
304 	int	have_seeprom;
305 	uint8_t scsi_conf;
306 
307 	sd.sd_ahc = ahc;
308 	sd.sd_control_offset = SEECTL_2840;
309 	sd.sd_status_offset = STATUS_2840;
310 	sd.sd_dataout_offset = STATUS_2840;
311 	sd.sd_chip = C46;
312 	sd.sd_MS = 0;
313 	sd.sd_RDY = EEPROM_TF;
314 	sd.sd_CS = CS_2840;
315 	sd.sd_CK = CK_2840;
316 	sd.sd_DO = DO_2840;
317 	sd.sd_DI = DI_2840;
318 	sc = ahc->seep_config;
319 
320 	if (bootverbose)
321 		printf("%s: Reading SEEPROM...", ahc_name(ahc));
322 	have_seeprom = ahc_read_seeprom(&sd, (uint16_t *)sc,
323 					/*start_addr*/0, sizeof(*sc)/2);
324 
325 	if (have_seeprom) {
326 
327 		if (ahc_verify_cksum(sc) == 0) {
328 			if(bootverbose)
329 				printf ("checksum error\n");
330 			have_seeprom = 0;
331 		} else if (bootverbose) {
332 			printf("done.\n");
333 		}
334 	}
335 
336 	if (!have_seeprom) {
337 		if (bootverbose)
338 			printf("%s: No SEEPROM available\n", ahc_name(ahc));
339 		ahc->flags |= AHC_USEDEFAULTS;
340 	} else {
341 		/*
342 		 * Put the data we've collected down into SRAM
343 		 * where ahc_init will find it.
344 		 */
345 		int	 i;
346 		int	 max_targ;
347 		uint16_t discenable;
348 
349 		max_targ = (ahc->features & AHC_WIDE) != 0 ? 16 : 8;
350 		discenable = 0;
351 		for (i = 0; i < max_targ; i++){
352 			uint8_t target_settings;
353 
354 			target_settings = (sc->device_flags[i] & CFXFER) << 4;
355 			if (sc->device_flags[i] & CFSYNCH)
356 				target_settings |= SOFS;
357 			if (sc->device_flags[i] & CFWIDEB)
358 				target_settings |= WIDEXFER;
359 			if (sc->device_flags[i] & CFDISC)
360 				discenable |= (0x01 << i);
361 			ahc_outb(ahc, TARG_SCSIRATE + i, target_settings);
362 		}
363 		ahc_outb(ahc, DISC_DSB, ~(discenable & 0xff));
364 		ahc_outb(ahc, DISC_DSB + 1, ~((discenable >> 8) & 0xff));
365 
366 		ahc->our_id = sc->brtime_id & CFSCSIID;
367 
368 		scsi_conf = (ahc->our_id & 0x7);
369 		if (sc->adapter_control & CFSPARITY)
370 			scsi_conf |= ENSPCHK;
371 		if (sc->adapter_control & CFRESETB)
372 			scsi_conf |= RESET_SCSI;
373 
374 		if (sc->bios_control & CF284XEXTEND)
375 			ahc->flags |= AHC_EXTENDED_TRANS_A;
376 		/* Set SCSICONF info */
377 		ahc_outb(ahc, SCSICONF, scsi_conf);
378 
379 		if (sc->adapter_control & CF284XSTERM)
380 			ahc->flags |= AHC_TERM_ENB_A;
381 	}
382 	return (have_seeprom);
383 }
384 
385 static int
386 ahc_aic7770_VL_setup(struct ahc_softc *ahc)
387 {
388 	int error;
389 
390 	error = ahc_aic7770_setup(ahc);
391 	ahc->chip |= AHC_VL;
392 	return (error);
393 }
394 
395 static int
396 ahc_aic7770_EISA_setup(struct ahc_softc *ahc)
397 {
398 	int error;
399 
400 	error = ahc_aic7770_setup(ahc);
401 	ahc->chip |= AHC_EISA;
402 	return (error);
403 }
404 
405 static int
406 ahc_aic7770_setup(struct ahc_softc *ahc)
407 {
408 	ahc->channel = 'A';
409 	ahc->channel_b = 'B';
410 	ahc->chip = AHC_AIC7770;
411 	ahc->features = AHC_AIC7770_FE;
412 	ahc->bugs |= AHC_TMODE_WIDEODD_BUG;
413 	ahc->flags |= AHC_PAGESCBS;
414 	ahc->instruction_ram_size = 448;
415 	return (0);
416 }
417