1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2009-2012 Alexander Motin <mav@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include <sys/param.h> 33 #include <sys/module.h> 34 #include <sys/systm.h> 35 #include <sys/kernel.h> 36 #include <sys/bus.h> 37 #include <sys/conf.h> 38 #include <sys/endian.h> 39 #include <sys/malloc.h> 40 #include <sys/lock.h> 41 #include <sys/mutex.h> 42 #include <sys/sbuf.h> 43 #include <sys/sysctl.h> 44 #include <machine/stdarg.h> 45 #include <machine/resource.h> 46 #include <machine/bus.h> 47 #include <sys/rman.h> 48 #include "ahci.h" 49 50 #include <cam/cam.h> 51 #include <cam/cam_ccb.h> 52 #include <cam/cam_sim.h> 53 #include <cam/cam_xpt_sim.h> 54 #include <cam/cam_debug.h> 55 56 /* local prototypes */ 57 static void ahci_intr(void *data); 58 static void ahci_intr_one(void *data); 59 static void ahci_intr_one_edge(void *data); 60 static int ahci_ch_init(device_t dev); 61 static int ahci_ch_deinit(device_t dev); 62 static int ahci_ch_suspend(device_t dev); 63 static int ahci_ch_resume(device_t dev); 64 static void ahci_ch_pm(void *arg); 65 static void ahci_ch_intr(void *arg); 66 static void ahci_ch_intr_direct(void *arg); 67 static void ahci_ch_intr_main(struct ahci_channel *ch, uint32_t istatus); 68 static void ahci_begin_transaction(struct ahci_channel *ch, union ccb *ccb); 69 static void ahci_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error); 70 static void ahci_execute_transaction(struct ahci_slot *slot); 71 static void ahci_timeout(void *arg); 72 static void ahci_end_transaction(struct ahci_slot *slot, enum ahci_err_type et); 73 static int ahci_setup_fis(struct ahci_channel *ch, struct ahci_cmd_tab *ctp, union ccb *ccb, int tag); 74 static void ahci_dmainit(device_t dev); 75 static void ahci_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error); 76 static void ahci_dmafini(device_t dev); 77 static void ahci_slotsalloc(device_t dev); 78 static void ahci_slotsfree(device_t dev); 79 static void ahci_reset(struct ahci_channel *ch); 80 static void ahci_start(struct ahci_channel *ch, int fbs); 81 static void ahci_stop(struct ahci_channel *ch); 82 static void ahci_clo(struct ahci_channel *ch); 83 static void ahci_start_fr(struct ahci_channel *ch); 84 static void ahci_stop_fr(struct ahci_channel *ch); 85 static int ahci_phy_check_events(struct ahci_channel *ch, u_int32_t serr); 86 static uint32_t ahci_ch_detval(struct ahci_channel *ch, uint32_t val); 87 88 static int ahci_sata_connect(struct ahci_channel *ch); 89 static int ahci_sata_phy_reset(struct ahci_channel *ch); 90 static int ahci_wait_ready(struct ahci_channel *ch, int t, int t0); 91 92 static void ahci_issue_recovery(struct ahci_channel *ch); 93 static void ahci_process_read_log(struct ahci_channel *ch, union ccb *ccb); 94 static void ahci_process_request_sense(struct ahci_channel *ch, union ccb *ccb); 95 96 static void ahciaction(struct cam_sim *sim, union ccb *ccb); 97 static void ahcipoll(struct cam_sim *sim); 98 99 static MALLOC_DEFINE(M_AHCI, "AHCI driver", "AHCI driver data buffers"); 100 101 #define recovery_type spriv_field0 102 #define RECOVERY_NONE 0 103 #define RECOVERY_READ_LOG 1 104 #define RECOVERY_REQUEST_SENSE 2 105 #define recovery_slot spriv_field1 106 107 static uint32_t 108 ahci_ch_detval(struct ahci_channel *ch, uint32_t val) 109 { 110 111 return ch->disablephy ? ATA_SC_DET_DISABLE : val; 112 } 113 114 int 115 ahci_ctlr_setup(device_t dev) 116 { 117 struct ahci_controller *ctlr = device_get_softc(dev); 118 /* Clear interrupts */ 119 ATA_OUTL(ctlr->r_mem, AHCI_IS, ATA_INL(ctlr->r_mem, AHCI_IS)); 120 /* Configure CCC */ 121 if (ctlr->ccc) { 122 ATA_OUTL(ctlr->r_mem, AHCI_CCCP, ATA_INL(ctlr->r_mem, AHCI_PI)); 123 ATA_OUTL(ctlr->r_mem, AHCI_CCCC, 124 (ctlr->ccc << AHCI_CCCC_TV_SHIFT) | 125 (4 << AHCI_CCCC_CC_SHIFT) | 126 AHCI_CCCC_EN); 127 ctlr->cccv = (ATA_INL(ctlr->r_mem, AHCI_CCCC) & 128 AHCI_CCCC_INT_MASK) >> AHCI_CCCC_INT_SHIFT; 129 if (bootverbose) { 130 device_printf(dev, 131 "CCC with %dms/4cmd enabled on vector %d\n", 132 ctlr->ccc, ctlr->cccv); 133 } 134 } 135 /* Enable AHCI interrupts */ 136 ATA_OUTL(ctlr->r_mem, AHCI_GHC, 137 ATA_INL(ctlr->r_mem, AHCI_GHC) | AHCI_GHC_IE); 138 return (0); 139 } 140 141 int 142 ahci_ctlr_reset(device_t dev) 143 { 144 struct ahci_controller *ctlr = device_get_softc(dev); 145 uint32_t v; 146 int timeout; 147 148 /* BIOS/OS Handoff */ 149 if ((ATA_INL(ctlr->r_mem, AHCI_VS) >= 0x00010200) && 150 (ATA_INL(ctlr->r_mem, AHCI_CAP2) & AHCI_CAP2_BOH) && 151 ((v = ATA_INL(ctlr->r_mem, AHCI_BOHC)) & AHCI_BOHC_OOS) == 0) { 152 /* Request OS ownership. */ 153 ATA_OUTL(ctlr->r_mem, AHCI_BOHC, v | AHCI_BOHC_OOS); 154 155 /* Wait up to 2s for BIOS ownership release. */ 156 for (timeout = 0; timeout < 80; timeout++) { 157 DELAY(25000); 158 v = ATA_INL(ctlr->r_mem, AHCI_BOHC); 159 if ((v & AHCI_BOHC_BOS) == 0) 160 break; 161 if ((v & AHCI_BOHC_BB) == 0) 162 break; 163 } 164 } 165 166 /* Enable AHCI mode */ 167 ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE); 168 /* Reset AHCI controller */ 169 ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE|AHCI_GHC_HR); 170 for (timeout = 1000; timeout > 0; timeout--) { 171 DELAY(1000); 172 if ((ATA_INL(ctlr->r_mem, AHCI_GHC) & AHCI_GHC_HR) == 0) 173 break; 174 } 175 if (timeout == 0) { 176 device_printf(dev, "AHCI controller reset failure\n"); 177 return (ENXIO); 178 } 179 /* Reenable AHCI mode */ 180 ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE); 181 182 if (ctlr->quirks & AHCI_Q_RESTORE_CAP) { 183 /* 184 * Restore capability field. 185 * This is write to a read-only register to restore its state. 186 * On fully standard-compliant hardware this is not needed and 187 * this operation shall not take place. See ahci_pci.c for 188 * platforms using this quirk. 189 */ 190 ATA_OUTL(ctlr->r_mem, AHCI_CAP, ctlr->caps); 191 } 192 193 return (0); 194 } 195 196 int 197 ahci_attach(device_t dev) 198 { 199 struct ahci_controller *ctlr = device_get_softc(dev); 200 int error, i, speed, unit; 201 uint32_t u, version; 202 device_t child; 203 204 ctlr->dev = dev; 205 ctlr->ccc = 0; 206 resource_int_value(device_get_name(dev), 207 device_get_unit(dev), "ccc", &ctlr->ccc); 208 mtx_init(&ctlr->ch_mtx, "AHCI channels lock", NULL, MTX_DEF); 209 210 /* Setup our own memory management for channels. */ 211 ctlr->sc_iomem.rm_start = rman_get_start(ctlr->r_mem); 212 ctlr->sc_iomem.rm_end = rman_get_end(ctlr->r_mem); 213 ctlr->sc_iomem.rm_type = RMAN_ARRAY; 214 ctlr->sc_iomem.rm_descr = "I/O memory addresses"; 215 if ((error = rman_init(&ctlr->sc_iomem)) != 0) { 216 ahci_free_mem(dev); 217 return (error); 218 } 219 if ((error = rman_manage_region(&ctlr->sc_iomem, 220 rman_get_start(ctlr->r_mem), rman_get_end(ctlr->r_mem))) != 0) { 221 ahci_free_mem(dev); 222 rman_fini(&ctlr->sc_iomem); 223 return (error); 224 } 225 /* Get the HW capabilities */ 226 version = ATA_INL(ctlr->r_mem, AHCI_VS); 227 ctlr->caps = ATA_INL(ctlr->r_mem, AHCI_CAP); 228 if (version >= 0x00010200) 229 ctlr->caps2 = ATA_INL(ctlr->r_mem, AHCI_CAP2); 230 if (ctlr->caps & AHCI_CAP_EMS) 231 ctlr->capsem = ATA_INL(ctlr->r_mem, AHCI_EM_CTL); 232 233 if (ctlr->quirks & AHCI_Q_FORCE_PI) { 234 /* 235 * Enable ports. 236 * The spec says that BIOS sets up bits corresponding to 237 * available ports. On platforms where this information 238 * is missing, the driver can define available ports on its own. 239 */ 240 int nports = (ctlr->caps & AHCI_CAP_NPMASK) + 1; 241 int nmask = (1 << nports) - 1; 242 243 ATA_OUTL(ctlr->r_mem, AHCI_PI, nmask); 244 device_printf(dev, "Forcing PI to %d ports (mask = %x)\n", 245 nports, nmask); 246 } 247 248 ctlr->ichannels = ATA_INL(ctlr->r_mem, AHCI_PI); 249 250 /* Identify and set separate quirks for HBA and RAID f/w Marvells. */ 251 if ((ctlr->quirks & AHCI_Q_ALTSIG) && 252 (ctlr->caps & AHCI_CAP_SPM) == 0) 253 ctlr->quirks |= AHCI_Q_NOBSYRES; 254 255 if (ctlr->quirks & AHCI_Q_1CH) { 256 ctlr->caps &= ~AHCI_CAP_NPMASK; 257 ctlr->ichannels &= 0x01; 258 } 259 if (ctlr->quirks & AHCI_Q_2CH) { 260 ctlr->caps &= ~AHCI_CAP_NPMASK; 261 ctlr->caps |= 1; 262 ctlr->ichannels &= 0x03; 263 } 264 if (ctlr->quirks & AHCI_Q_4CH) { 265 ctlr->caps &= ~AHCI_CAP_NPMASK; 266 ctlr->caps |= 3; 267 ctlr->ichannels &= 0x0f; 268 } 269 ctlr->channels = MAX(flsl(ctlr->ichannels), 270 (ctlr->caps & AHCI_CAP_NPMASK) + 1); 271 if (ctlr->quirks & AHCI_Q_NOPMP) 272 ctlr->caps &= ~AHCI_CAP_SPM; 273 if (ctlr->quirks & AHCI_Q_NONCQ) 274 ctlr->caps &= ~AHCI_CAP_SNCQ; 275 if ((ctlr->caps & AHCI_CAP_CCCS) == 0) 276 ctlr->ccc = 0; 277 ctlr->emloc = ATA_INL(ctlr->r_mem, AHCI_EM_LOC); 278 279 /* Create controller-wide DMA tag. */ 280 if (bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0, 281 (ctlr->caps & AHCI_CAP_64BIT) ? BUS_SPACE_MAXADDR : 282 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 283 BUS_SPACE_MAXSIZE, BUS_SPACE_UNRESTRICTED, BUS_SPACE_MAXSIZE, 284 ctlr->dma_coherent ? BUS_DMA_COHERENT : 0, NULL, NULL, 285 &ctlr->dma_tag)) { 286 ahci_free_mem(dev); 287 rman_fini(&ctlr->sc_iomem); 288 return (ENXIO); 289 } 290 291 ahci_ctlr_setup(dev); 292 293 /* Setup interrupts. */ 294 if ((error = ahci_setup_interrupt(dev)) != 0) { 295 bus_dma_tag_destroy(ctlr->dma_tag); 296 ahci_free_mem(dev); 297 rman_fini(&ctlr->sc_iomem); 298 return (error); 299 } 300 301 i = 0; 302 for (u = ctlr->ichannels; u != 0; u >>= 1) 303 i += (u & 1); 304 ctlr->direct = (ctlr->msi && (ctlr->numirqs > 1 || i <= 3)); 305 resource_int_value(device_get_name(dev), device_get_unit(dev), 306 "direct", &ctlr->direct); 307 /* Announce HW capabilities. */ 308 speed = (ctlr->caps & AHCI_CAP_ISS) >> AHCI_CAP_ISS_SHIFT; 309 device_printf(dev, 310 "AHCI v%x.%02x with %d %sGbps ports, Port Multiplier %s%s\n", 311 ((version >> 20) & 0xf0) + ((version >> 16) & 0x0f), 312 ((version >> 4) & 0xf0) + (version & 0x0f), 313 (ctlr->caps & AHCI_CAP_NPMASK) + 1, 314 ((speed == 1) ? "1.5":((speed == 2) ? "3": 315 ((speed == 3) ? "6":"?"))), 316 (ctlr->caps & AHCI_CAP_SPM) ? 317 "supported" : "not supported", 318 (ctlr->caps & AHCI_CAP_FBSS) ? 319 " with FBS" : ""); 320 if (ctlr->quirks != 0) { 321 device_printf(dev, "quirks=0x%b\n", ctlr->quirks, 322 AHCI_Q_BIT_STRING); 323 } 324 if (bootverbose) { 325 device_printf(dev, "Caps:%s%s%s%s%s%s%s%s %sGbps", 326 (ctlr->caps & AHCI_CAP_64BIT) ? " 64bit":"", 327 (ctlr->caps & AHCI_CAP_SNCQ) ? " NCQ":"", 328 (ctlr->caps & AHCI_CAP_SSNTF) ? " SNTF":"", 329 (ctlr->caps & AHCI_CAP_SMPS) ? " MPS":"", 330 (ctlr->caps & AHCI_CAP_SSS) ? " SS":"", 331 (ctlr->caps & AHCI_CAP_SALP) ? " ALP":"", 332 (ctlr->caps & AHCI_CAP_SAL) ? " AL":"", 333 (ctlr->caps & AHCI_CAP_SCLO) ? " CLO":"", 334 ((speed == 1) ? "1.5":((speed == 2) ? "3": 335 ((speed == 3) ? "6":"?")))); 336 printf("%s%s%s%s%s%s %dcmd%s%s%s %dports\n", 337 (ctlr->caps & AHCI_CAP_SAM) ? " AM":"", 338 (ctlr->caps & AHCI_CAP_SPM) ? " PM":"", 339 (ctlr->caps & AHCI_CAP_FBSS) ? " FBS":"", 340 (ctlr->caps & AHCI_CAP_PMD) ? " PMD":"", 341 (ctlr->caps & AHCI_CAP_SSC) ? " SSC":"", 342 (ctlr->caps & AHCI_CAP_PSC) ? " PSC":"", 343 ((ctlr->caps & AHCI_CAP_NCS) >> AHCI_CAP_NCS_SHIFT) + 1, 344 (ctlr->caps & AHCI_CAP_CCCS) ? " CCC":"", 345 (ctlr->caps & AHCI_CAP_EMS) ? " EM":"", 346 (ctlr->caps & AHCI_CAP_SXS) ? " eSATA":"", 347 (ctlr->caps & AHCI_CAP_NPMASK) + 1); 348 } 349 if (bootverbose && version >= 0x00010200) { 350 device_printf(dev, "Caps2:%s%s%s%s%s%s\n", 351 (ctlr->caps2 & AHCI_CAP2_DESO) ? " DESO":"", 352 (ctlr->caps2 & AHCI_CAP2_SADM) ? " SADM":"", 353 (ctlr->caps2 & AHCI_CAP2_SDS) ? " SDS":"", 354 (ctlr->caps2 & AHCI_CAP2_APST) ? " APST":"", 355 (ctlr->caps2 & AHCI_CAP2_NVMP) ? " NVMP":"", 356 (ctlr->caps2 & AHCI_CAP2_BOH) ? " BOH":""); 357 } 358 /* Attach all channels on this controller */ 359 for (unit = 0; unit < ctlr->channels; unit++) { 360 child = device_add_child(dev, "ahcich", -1); 361 if (child == NULL) { 362 device_printf(dev, "failed to add channel device\n"); 363 continue; 364 } 365 device_set_ivars(child, (void *)(intptr_t)unit); 366 if ((ctlr->ichannels & (1 << unit)) == 0) 367 device_disable(child); 368 } 369 /* Attach any remapped NVME device */ 370 for (; unit < ctlr->channels + ctlr->remapped_devices; unit++) { 371 child = device_add_child(dev, "nvme", -1); 372 if (child == NULL) { 373 device_printf(dev, "failed to add remapped NVMe device"); 374 continue; 375 } 376 device_set_ivars(child, (void *)(intptr_t)(unit | AHCI_REMAPPED_UNIT)); 377 } 378 379 if (ctlr->caps & AHCI_CAP_EMS) { 380 child = device_add_child(dev, "ahciem", -1); 381 if (child == NULL) 382 device_printf(dev, "failed to add enclosure device\n"); 383 else 384 device_set_ivars(child, (void *)(intptr_t)AHCI_EM_UNIT); 385 } 386 bus_generic_attach(dev); 387 return (0); 388 } 389 390 int 391 ahci_detach(device_t dev) 392 { 393 struct ahci_controller *ctlr = device_get_softc(dev); 394 int i; 395 396 /* Detach & delete all children */ 397 device_delete_children(dev); 398 399 /* Free interrupts. */ 400 for (i = 0; i < ctlr->numirqs; i++) { 401 if (ctlr->irqs[i].r_irq) { 402 bus_teardown_intr(dev, ctlr->irqs[i].r_irq, 403 ctlr->irqs[i].handle); 404 bus_release_resource(dev, SYS_RES_IRQ, 405 ctlr->irqs[i].r_irq_rid, ctlr->irqs[i].r_irq); 406 } 407 } 408 bus_dma_tag_destroy(ctlr->dma_tag); 409 /* Free memory. */ 410 rman_fini(&ctlr->sc_iomem); 411 ahci_free_mem(dev); 412 mtx_destroy(&ctlr->ch_mtx); 413 return (0); 414 } 415 416 void 417 ahci_free_mem(device_t dev) 418 { 419 struct ahci_controller *ctlr = device_get_softc(dev); 420 421 /* Release memory resources */ 422 if (ctlr->r_mem) 423 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); 424 if (ctlr->r_msix_table) 425 bus_release_resource(dev, SYS_RES_MEMORY, 426 ctlr->r_msix_tab_rid, ctlr->r_msix_table); 427 if (ctlr->r_msix_pba) 428 bus_release_resource(dev, SYS_RES_MEMORY, 429 ctlr->r_msix_pba_rid, ctlr->r_msix_pba); 430 431 ctlr->r_msix_pba = ctlr->r_mem = ctlr->r_msix_table = NULL; 432 } 433 434 int 435 ahci_setup_interrupt(device_t dev) 436 { 437 struct ahci_controller *ctlr = device_get_softc(dev); 438 int i; 439 440 /* Check for single MSI vector fallback. */ 441 if (ctlr->numirqs > 1 && 442 (ATA_INL(ctlr->r_mem, AHCI_GHC) & AHCI_GHC_MRSM) != 0) { 443 device_printf(dev, "Falling back to one MSI\n"); 444 ctlr->numirqs = 1; 445 } 446 447 /* Ensure we don't overrun irqs. */ 448 if (ctlr->numirqs > AHCI_MAX_IRQS) { 449 device_printf(dev, "Too many irqs %d > %d (clamping)\n", 450 ctlr->numirqs, AHCI_MAX_IRQS); 451 ctlr->numirqs = AHCI_MAX_IRQS; 452 } 453 454 /* Allocate all IRQs. */ 455 for (i = 0; i < ctlr->numirqs; i++) { 456 ctlr->irqs[i].ctlr = ctlr; 457 ctlr->irqs[i].r_irq_rid = i + (ctlr->msi ? 1 : 0); 458 if (ctlr->channels == 1 && !ctlr->ccc && ctlr->msi) 459 ctlr->irqs[i].mode = AHCI_IRQ_MODE_ONE; 460 else if (ctlr->numirqs == 1 || i >= ctlr->channels || 461 (ctlr->ccc && i == ctlr->cccv)) 462 ctlr->irqs[i].mode = AHCI_IRQ_MODE_ALL; 463 else if (ctlr->channels > ctlr->numirqs && 464 i == ctlr->numirqs - 1) 465 ctlr->irqs[i].mode = AHCI_IRQ_MODE_AFTER; 466 else 467 ctlr->irqs[i].mode = AHCI_IRQ_MODE_ONE; 468 if (!(ctlr->irqs[i].r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 469 &ctlr->irqs[i].r_irq_rid, RF_SHAREABLE | RF_ACTIVE))) { 470 device_printf(dev, "unable to map interrupt\n"); 471 return (ENXIO); 472 } 473 if ((bus_setup_intr(dev, ctlr->irqs[i].r_irq, ATA_INTR_FLAGS, NULL, 474 (ctlr->irqs[i].mode != AHCI_IRQ_MODE_ONE) ? ahci_intr : 475 ((ctlr->quirks & AHCI_Q_EDGEIS) ? ahci_intr_one_edge : 476 ahci_intr_one), 477 &ctlr->irqs[i], &ctlr->irqs[i].handle))) { 478 /* SOS XXX release r_irq */ 479 device_printf(dev, "unable to setup interrupt\n"); 480 return (ENXIO); 481 } 482 if (ctlr->numirqs > 1) { 483 bus_describe_intr(dev, ctlr->irqs[i].r_irq, 484 ctlr->irqs[i].handle, 485 ctlr->irqs[i].mode == AHCI_IRQ_MODE_ONE ? 486 "ch%d" : "%d", i); 487 } 488 } 489 return (0); 490 } 491 492 /* 493 * Common case interrupt handler. 494 */ 495 static void 496 ahci_intr(void *data) 497 { 498 struct ahci_controller_irq *irq = data; 499 struct ahci_controller *ctlr = irq->ctlr; 500 u_int32_t is, ise = 0; 501 void *arg; 502 int unit; 503 504 if (irq->mode == AHCI_IRQ_MODE_ALL) { 505 unit = 0; 506 if (ctlr->ccc) 507 is = ctlr->ichannels; 508 else 509 is = ATA_INL(ctlr->r_mem, AHCI_IS); 510 } else { /* AHCI_IRQ_MODE_AFTER */ 511 unit = irq->r_irq_rid - 1; 512 is = ATA_INL(ctlr->r_mem, AHCI_IS); 513 is &= (0xffffffff << unit); 514 } 515 /* CCC interrupt is edge triggered. */ 516 if (ctlr->ccc) 517 ise = 1 << ctlr->cccv; 518 /* Some controllers have edge triggered IS. */ 519 if (ctlr->quirks & AHCI_Q_EDGEIS) 520 ise |= is; 521 if (ise != 0) 522 ATA_OUTL(ctlr->r_mem, AHCI_IS, ise); 523 for (; unit < ctlr->channels; unit++) { 524 if ((is & (1 << unit)) != 0 && 525 (arg = ctlr->interrupt[unit].argument)) { 526 ctlr->interrupt[unit].function(arg); 527 } 528 } 529 for (; unit < ctlr->channels + ctlr->remapped_devices; unit++) { 530 if ((arg = ctlr->interrupt[unit].argument)) { 531 ctlr->interrupt[unit].function(arg); 532 } 533 } 534 535 /* AHCI declares level triggered IS. */ 536 if (!(ctlr->quirks & AHCI_Q_EDGEIS)) 537 ATA_OUTL(ctlr->r_mem, AHCI_IS, is); 538 ATA_RBL(ctlr->r_mem, AHCI_IS); 539 } 540 541 /* 542 * Simplified interrupt handler for multivector MSI mode. 543 */ 544 static void 545 ahci_intr_one(void *data) 546 { 547 struct ahci_controller_irq *irq = data; 548 struct ahci_controller *ctlr = irq->ctlr; 549 void *arg; 550 int unit; 551 552 unit = irq->r_irq_rid - 1; 553 if ((arg = ctlr->interrupt[unit].argument)) 554 ctlr->interrupt[unit].function(arg); 555 /* AHCI declares level triggered IS. */ 556 ATA_OUTL(ctlr->r_mem, AHCI_IS, 1 << unit); 557 ATA_RBL(ctlr->r_mem, AHCI_IS); 558 } 559 560 static void 561 ahci_intr_one_edge(void *data) 562 { 563 struct ahci_controller_irq *irq = data; 564 struct ahci_controller *ctlr = irq->ctlr; 565 void *arg; 566 int unit; 567 568 unit = irq->r_irq_rid - 1; 569 /* Some controllers have edge triggered IS. */ 570 ATA_OUTL(ctlr->r_mem, AHCI_IS, 1 << unit); 571 if ((arg = ctlr->interrupt[unit].argument)) 572 ctlr->interrupt[unit].function(arg); 573 ATA_RBL(ctlr->r_mem, AHCI_IS); 574 } 575 576 struct resource * 577 ahci_alloc_resource(device_t dev, device_t child, int type, int *rid, 578 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 579 { 580 struct ahci_controller *ctlr = device_get_softc(dev); 581 struct resource *res; 582 rman_res_t st; 583 int offset, size, unit; 584 bool is_em, is_remapped; 585 586 unit = (intptr_t)device_get_ivars(child); 587 is_em = is_remapped = false; 588 if (unit & AHCI_REMAPPED_UNIT) { 589 unit &= AHCI_UNIT; 590 unit -= ctlr->channels; 591 is_remapped = true; 592 } else if (unit & AHCI_EM_UNIT) { 593 unit &= AHCI_UNIT; 594 is_em = true; 595 } 596 res = NULL; 597 switch (type) { 598 case SYS_RES_MEMORY: 599 if (is_remapped) { 600 offset = ctlr->remap_offset + unit * ctlr->remap_size; 601 size = ctlr->remap_size; 602 } else if (!is_em) { 603 offset = AHCI_OFFSET + (unit << 7); 604 size = 128; 605 } else if (*rid == 0) { 606 offset = AHCI_EM_CTL; 607 size = 4; 608 } else { 609 offset = (ctlr->emloc & 0xffff0000) >> 14; 610 size = (ctlr->emloc & 0x0000ffff) << 2; 611 if (*rid != 1) { 612 if (*rid == 2 && (ctlr->capsem & 613 (AHCI_EM_XMT | AHCI_EM_SMB)) == 0) 614 offset += size; 615 else 616 break; 617 } 618 } 619 st = rman_get_start(ctlr->r_mem); 620 res = rman_reserve_resource(&ctlr->sc_iomem, st + offset, 621 st + offset + size - 1, size, RF_ACTIVE, child); 622 if (res) { 623 bus_space_handle_t bsh; 624 bus_space_tag_t bst; 625 bsh = rman_get_bushandle(ctlr->r_mem); 626 bst = rman_get_bustag(ctlr->r_mem); 627 bus_space_subregion(bst, bsh, offset, 128, &bsh); 628 rman_set_bushandle(res, bsh); 629 rman_set_bustag(res, bst); 630 } 631 break; 632 case SYS_RES_IRQ: 633 if (*rid == ATA_IRQ_RID) 634 res = ctlr->irqs[0].r_irq; 635 break; 636 } 637 return (res); 638 } 639 640 int 641 ahci_release_resource(device_t dev, device_t child, int type, int rid, 642 struct resource *r) 643 { 644 645 switch (type) { 646 case SYS_RES_MEMORY: 647 rman_release_resource(r); 648 return (0); 649 case SYS_RES_IRQ: 650 if (rid != ATA_IRQ_RID) 651 return (ENOENT); 652 return (0); 653 } 654 return (EINVAL); 655 } 656 657 int 658 ahci_setup_intr(device_t dev, device_t child, struct resource *irq, 659 int flags, driver_filter_t *filter, driver_intr_t *function, 660 void *argument, void **cookiep) 661 { 662 struct ahci_controller *ctlr = device_get_softc(dev); 663 int unit = (intptr_t)device_get_ivars(child) & AHCI_UNIT; 664 665 if (filter != NULL) { 666 printf("ahci.c: we cannot use a filter here\n"); 667 return (EINVAL); 668 } 669 ctlr->interrupt[unit].function = function; 670 ctlr->interrupt[unit].argument = argument; 671 return (0); 672 } 673 674 int 675 ahci_teardown_intr(device_t dev, device_t child, struct resource *irq, 676 void *cookie) 677 { 678 struct ahci_controller *ctlr = device_get_softc(dev); 679 int unit = (intptr_t)device_get_ivars(child) & AHCI_UNIT; 680 681 ctlr->interrupt[unit].function = NULL; 682 ctlr->interrupt[unit].argument = NULL; 683 return (0); 684 } 685 686 int 687 ahci_print_child(device_t dev, device_t child) 688 { 689 intptr_t ivars; 690 int retval; 691 692 retval = bus_print_child_header(dev, child); 693 ivars = (intptr_t)device_get_ivars(child); 694 if ((ivars & AHCI_EM_UNIT) == 0) 695 retval += printf(" at channel %d", (int)ivars & AHCI_UNIT); 696 retval += bus_print_child_footer(dev, child); 697 return (retval); 698 } 699 700 int 701 ahci_child_location(device_t dev, device_t child, struct sbuf *sb) 702 { 703 intptr_t ivars; 704 705 ivars = (intptr_t)device_get_ivars(child); 706 if ((ivars & AHCI_EM_UNIT) == 0) 707 sbuf_printf(sb, "channel=%d", (int)ivars & AHCI_UNIT); 708 return (0); 709 } 710 711 bus_dma_tag_t 712 ahci_get_dma_tag(device_t dev, device_t child) 713 { 714 struct ahci_controller *ctlr = device_get_softc(dev); 715 716 return (ctlr->dma_tag); 717 } 718 719 void 720 ahci_attached(device_t dev, struct ahci_channel *ch) 721 { 722 struct ahci_controller *ctlr = device_get_softc(dev); 723 724 mtx_lock(&ctlr->ch_mtx); 725 ctlr->ch[ch->unit] = ch; 726 mtx_unlock(&ctlr->ch_mtx); 727 } 728 729 void 730 ahci_detached(device_t dev, struct ahci_channel *ch) 731 { 732 struct ahci_controller *ctlr = device_get_softc(dev); 733 734 mtx_lock(&ctlr->ch_mtx); 735 mtx_lock(&ch->mtx); 736 ctlr->ch[ch->unit] = NULL; 737 mtx_unlock(&ch->mtx); 738 mtx_unlock(&ctlr->ch_mtx); 739 } 740 741 struct ahci_channel * 742 ahci_getch(device_t dev, int n) 743 { 744 struct ahci_controller *ctlr = device_get_softc(dev); 745 struct ahci_channel *ch; 746 747 KASSERT(n >= 0 && n < AHCI_MAX_PORTS, ("Bad channel number %d", n)); 748 mtx_lock(&ctlr->ch_mtx); 749 ch = ctlr->ch[n]; 750 if (ch != NULL) 751 mtx_lock(&ch->mtx); 752 mtx_unlock(&ctlr->ch_mtx); 753 return (ch); 754 } 755 756 void 757 ahci_putch(struct ahci_channel *ch) 758 { 759 760 mtx_unlock(&ch->mtx); 761 } 762 763 static int 764 ahci_ch_probe(device_t dev) 765 { 766 767 device_set_desc_copy(dev, "AHCI channel"); 768 return (BUS_PROBE_DEFAULT); 769 } 770 771 static int 772 ahci_ch_disablephy_proc(SYSCTL_HANDLER_ARGS) 773 { 774 struct ahci_channel *ch; 775 int error, value; 776 777 ch = arg1; 778 value = ch->disablephy; 779 error = sysctl_handle_int(oidp, &value, 0, req); 780 if (error != 0 || req->newptr == NULL || (value != 0 && value != 1)) 781 return (error); 782 783 mtx_lock(&ch->mtx); 784 ch->disablephy = value; 785 if (value) { 786 ahci_ch_deinit(ch->dev); 787 } else { 788 ahci_ch_init(ch->dev); 789 ahci_phy_check_events(ch, ATA_SE_PHY_CHANGED | ATA_SE_EXCHANGED); 790 } 791 mtx_unlock(&ch->mtx); 792 793 return (0); 794 } 795 796 static int 797 ahci_ch_attach(device_t dev) 798 { 799 struct ahci_controller *ctlr = device_get_softc(device_get_parent(dev)); 800 struct ahci_channel *ch = device_get_softc(dev); 801 struct cam_devq *devq; 802 struct sysctl_ctx_list *ctx; 803 struct sysctl_oid *tree; 804 int rid, error, i, sata_rev = 0; 805 u_int32_t version; 806 807 ch->dev = dev; 808 ch->unit = (intptr_t)device_get_ivars(dev); 809 ch->caps = ctlr->caps; 810 ch->caps2 = ctlr->caps2; 811 ch->start = ctlr->ch_start; 812 ch->quirks = ctlr->quirks; 813 ch->vendorid = ctlr->vendorid; 814 ch->deviceid = ctlr->deviceid; 815 ch->subvendorid = ctlr->subvendorid; 816 ch->subdeviceid = ctlr->subdeviceid; 817 ch->numslots = ((ch->caps & AHCI_CAP_NCS) >> AHCI_CAP_NCS_SHIFT) + 1; 818 mtx_init(&ch->mtx, "AHCI channel lock", NULL, MTX_DEF); 819 ch->pm_level = 0; 820 resource_int_value(device_get_name(dev), 821 device_get_unit(dev), "pm_level", &ch->pm_level); 822 STAILQ_INIT(&ch->doneq); 823 if (ch->pm_level > 3) 824 callout_init_mtx(&ch->pm_timer, &ch->mtx, 0); 825 callout_init_mtx(&ch->reset_timer, &ch->mtx, 0); 826 /* JMicron external ports (0) sometimes limited */ 827 if ((ctlr->quirks & AHCI_Q_SATA1_UNIT0) && ch->unit == 0) 828 sata_rev = 1; 829 if (ch->quirks & AHCI_Q_SATA2) 830 sata_rev = 2; 831 resource_int_value(device_get_name(dev), 832 device_get_unit(dev), "sata_rev", &sata_rev); 833 for (i = 0; i < 16; i++) { 834 ch->user[i].revision = sata_rev; 835 ch->user[i].mode = 0; 836 ch->user[i].bytecount = 8192; 837 ch->user[i].tags = ch->numslots; 838 ch->user[i].caps = 0; 839 ch->curr[i] = ch->user[i]; 840 if (ch->pm_level) { 841 ch->user[i].caps = CTS_SATA_CAPS_H_PMREQ | 842 CTS_SATA_CAPS_H_APST | 843 CTS_SATA_CAPS_D_PMREQ | CTS_SATA_CAPS_D_APST; 844 } 845 ch->user[i].caps |= CTS_SATA_CAPS_H_DMAAA | 846 CTS_SATA_CAPS_H_AN; 847 } 848 rid = 0; 849 if (!(ch->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 850 &rid, RF_ACTIVE))) 851 return (ENXIO); 852 ch->chcaps = ATA_INL(ch->r_mem, AHCI_P_CMD); 853 version = ATA_INL(ctlr->r_mem, AHCI_VS); 854 if (version < 0x00010200 && (ctlr->caps & AHCI_CAP_FBSS)) 855 ch->chcaps |= AHCI_P_CMD_FBSCP; 856 if (ch->caps2 & AHCI_CAP2_SDS) 857 ch->chscaps = ATA_INL(ch->r_mem, AHCI_P_DEVSLP); 858 if (bootverbose) { 859 device_printf(dev, "Caps:%s%s%s%s%s%s\n", 860 (ch->chcaps & AHCI_P_CMD_HPCP) ? " HPCP":"", 861 (ch->chcaps & AHCI_P_CMD_MPSP) ? " MPSP":"", 862 (ch->chcaps & AHCI_P_CMD_CPD) ? " CPD":"", 863 (ch->chcaps & AHCI_P_CMD_ESP) ? " ESP":"", 864 (ch->chcaps & AHCI_P_CMD_FBSCP) ? " FBSCP":"", 865 (ch->chscaps & AHCI_P_DEVSLP_DSP) ? " DSP":""); 866 } 867 ahci_dmainit(dev); 868 ahci_slotsalloc(dev); 869 mtx_lock(&ch->mtx); 870 ahci_ch_init(dev); 871 rid = ATA_IRQ_RID; 872 if (!(ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 873 &rid, RF_SHAREABLE | RF_ACTIVE))) { 874 device_printf(dev, "Unable to map interrupt\n"); 875 error = ENXIO; 876 goto err0; 877 } 878 if ((bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS, NULL, 879 ctlr->direct ? ahci_ch_intr_direct : ahci_ch_intr, 880 ch, &ch->ih))) { 881 device_printf(dev, "Unable to setup interrupt\n"); 882 error = ENXIO; 883 goto err1; 884 } 885 /* Create the device queue for our SIM. */ 886 devq = cam_simq_alloc(ch->numslots); 887 if (devq == NULL) { 888 device_printf(dev, "Unable to allocate simq\n"); 889 error = ENOMEM; 890 goto err1; 891 } 892 /* Construct SIM entry */ 893 ch->sim = cam_sim_alloc(ahciaction, ahcipoll, "ahcich", ch, 894 device_get_unit(dev), (struct mtx *)&ch->mtx, 895 (ch->quirks & AHCI_Q_NOCCS) ? 1 : min(2, ch->numslots), 896 (ch->caps & AHCI_CAP_SNCQ) ? ch->numslots : 0, 897 devq); 898 if (ch->sim == NULL) { 899 cam_simq_free(devq); 900 device_printf(dev, "unable to allocate sim\n"); 901 error = ENOMEM; 902 goto err1; 903 } 904 if (xpt_bus_register(ch->sim, dev, 0) != CAM_SUCCESS) { 905 device_printf(dev, "unable to register xpt bus\n"); 906 error = ENXIO; 907 goto err2; 908 } 909 if (xpt_create_path(&ch->path, /*periph*/NULL, cam_sim_path(ch->sim), 910 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 911 device_printf(dev, "unable to create path\n"); 912 error = ENXIO; 913 goto err3; 914 } 915 if (ch->pm_level > 3) { 916 callout_reset(&ch->pm_timer, 917 (ch->pm_level == 4) ? hz / 1000 : hz / 8, 918 ahci_ch_pm, ch); 919 } 920 mtx_unlock(&ch->mtx); 921 ahci_attached(device_get_parent(dev), ch); 922 ctx = device_get_sysctl_ctx(dev); 923 tree = device_get_sysctl_tree(dev); 924 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "disable_phy", 925 CTLFLAG_RW | CTLTYPE_UINT | CTLFLAG_NEEDGIANT, ch, 926 0, ahci_ch_disablephy_proc, "IU", "Disable PHY"); 927 return (0); 928 929 err3: 930 xpt_bus_deregister(cam_sim_path(ch->sim)); 931 err2: 932 cam_sim_free(ch->sim, /*free_devq*/TRUE); 933 err1: 934 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); 935 err0: 936 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); 937 mtx_unlock(&ch->mtx); 938 mtx_destroy(&ch->mtx); 939 return (error); 940 } 941 942 static int 943 ahci_ch_detach(device_t dev) 944 { 945 struct ahci_channel *ch = device_get_softc(dev); 946 947 ahci_detached(device_get_parent(dev), ch); 948 mtx_lock(&ch->mtx); 949 xpt_async(AC_LOST_DEVICE, ch->path, NULL); 950 /* Forget about reset. */ 951 if (ch->resetting) { 952 ch->resetting = 0; 953 xpt_release_simq(ch->sim, TRUE); 954 } 955 xpt_free_path(ch->path); 956 xpt_bus_deregister(cam_sim_path(ch->sim)); 957 cam_sim_free(ch->sim, /*free_devq*/TRUE); 958 mtx_unlock(&ch->mtx); 959 960 if (ch->pm_level > 3) 961 callout_drain(&ch->pm_timer); 962 callout_drain(&ch->reset_timer); 963 bus_teardown_intr(dev, ch->r_irq, ch->ih); 964 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); 965 966 ahci_ch_deinit(dev); 967 ahci_slotsfree(dev); 968 ahci_dmafini(dev); 969 970 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); 971 mtx_destroy(&ch->mtx); 972 return (0); 973 } 974 975 static int 976 ahci_ch_init(device_t dev) 977 { 978 struct ahci_channel *ch = device_get_softc(dev); 979 uint64_t work; 980 981 /* Disable port interrupts */ 982 ATA_OUTL(ch->r_mem, AHCI_P_IE, 0); 983 /* Setup work areas */ 984 work = ch->dma.work_bus + AHCI_CL_OFFSET; 985 ATA_OUTL(ch->r_mem, AHCI_P_CLB, work & 0xffffffff); 986 ATA_OUTL(ch->r_mem, AHCI_P_CLBU, work >> 32); 987 work = ch->dma.rfis_bus; 988 ATA_OUTL(ch->r_mem, AHCI_P_FB, work & 0xffffffff); 989 ATA_OUTL(ch->r_mem, AHCI_P_FBU, work >> 32); 990 /* Activate the channel and power/spin up device */ 991 ATA_OUTL(ch->r_mem, AHCI_P_CMD, 992 (AHCI_P_CMD_ACTIVE | AHCI_P_CMD_POD | AHCI_P_CMD_SUD | 993 ((ch->pm_level == 2 || ch->pm_level == 3) ? AHCI_P_CMD_ALPE : 0) | 994 ((ch->pm_level > 2) ? AHCI_P_CMD_ASP : 0 ))); 995 ahci_start_fr(ch); 996 ahci_start(ch, 1); 997 return (0); 998 } 999 1000 static int 1001 ahci_ch_deinit(device_t dev) 1002 { 1003 struct ahci_channel *ch = device_get_softc(dev); 1004 1005 /* Disable port interrupts. */ 1006 ATA_OUTL(ch->r_mem, AHCI_P_IE, 0); 1007 /* Reset command register. */ 1008 ahci_stop(ch); 1009 ahci_stop_fr(ch); 1010 ATA_OUTL(ch->r_mem, AHCI_P_CMD, 0); 1011 /* Allow everything, including partial and slumber modes. */ 1012 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, 0); 1013 /* Request slumber mode transition and give some time to get there. */ 1014 ATA_OUTL(ch->r_mem, AHCI_P_CMD, AHCI_P_CMD_SLUMBER); 1015 DELAY(100); 1016 /* Disable PHY. */ 1017 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, ATA_SC_DET_DISABLE); 1018 return (0); 1019 } 1020 1021 static int 1022 ahci_ch_suspend(device_t dev) 1023 { 1024 struct ahci_channel *ch = device_get_softc(dev); 1025 1026 mtx_lock(&ch->mtx); 1027 xpt_freeze_simq(ch->sim, 1); 1028 /* Forget about reset. */ 1029 if (ch->resetting) { 1030 ch->resetting = 0; 1031 callout_stop(&ch->reset_timer); 1032 xpt_release_simq(ch->sim, TRUE); 1033 } 1034 while (ch->oslots) 1035 msleep(ch, &ch->mtx, PRIBIO, "ahcisusp", hz/100); 1036 ahci_ch_deinit(dev); 1037 mtx_unlock(&ch->mtx); 1038 return (0); 1039 } 1040 1041 static int 1042 ahci_ch_resume(device_t dev) 1043 { 1044 struct ahci_channel *ch = device_get_softc(dev); 1045 1046 mtx_lock(&ch->mtx); 1047 ahci_ch_init(dev); 1048 ahci_reset(ch); 1049 xpt_release_simq(ch->sim, TRUE); 1050 mtx_unlock(&ch->mtx); 1051 return (0); 1052 } 1053 1054 devclass_t ahcich_devclass; 1055 static device_method_t ahcich_methods[] = { 1056 DEVMETHOD(device_probe, ahci_ch_probe), 1057 DEVMETHOD(device_attach, ahci_ch_attach), 1058 DEVMETHOD(device_detach, ahci_ch_detach), 1059 DEVMETHOD(device_suspend, ahci_ch_suspend), 1060 DEVMETHOD(device_resume, ahci_ch_resume), 1061 DEVMETHOD_END 1062 }; 1063 static driver_t ahcich_driver = { 1064 "ahcich", 1065 ahcich_methods, 1066 sizeof(struct ahci_channel) 1067 }; 1068 DRIVER_MODULE(ahcich, ahci, ahcich_driver, ahcich_devclass, NULL, NULL); 1069 1070 struct ahci_dc_cb_args { 1071 bus_addr_t maddr; 1072 int error; 1073 }; 1074 1075 static void 1076 ahci_dmainit(device_t dev) 1077 { 1078 struct ahci_channel *ch = device_get_softc(dev); 1079 struct ahci_dc_cb_args dcba; 1080 size_t rfsize; 1081 int error; 1082 1083 /* Command area. */ 1084 error = bus_dma_tag_create(bus_get_dma_tag(dev), 1024, 0, 1085 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 1086 NULL, NULL, AHCI_WORK_SIZE, 1, AHCI_WORK_SIZE, 1087 0, NULL, NULL, &ch->dma.work_tag); 1088 if (error != 0) 1089 goto error; 1090 error = bus_dmamem_alloc(ch->dma.work_tag, (void **)&ch->dma.work, 1091 BUS_DMA_ZERO, &ch->dma.work_map); 1092 if (error != 0) 1093 goto error; 1094 error = bus_dmamap_load(ch->dma.work_tag, ch->dma.work_map, ch->dma.work, 1095 AHCI_WORK_SIZE, ahci_dmasetupc_cb, &dcba, BUS_DMA_NOWAIT); 1096 if (error != 0 || (error = dcba.error) != 0) { 1097 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map); 1098 goto error; 1099 } 1100 ch->dma.work_bus = dcba.maddr; 1101 /* FIS receive area. */ 1102 if (ch->chcaps & AHCI_P_CMD_FBSCP) 1103 rfsize = 4096; 1104 else 1105 rfsize = 256; 1106 error = bus_dma_tag_create(bus_get_dma_tag(dev), rfsize, 0, 1107 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 1108 NULL, NULL, rfsize, 1, rfsize, 1109 0, NULL, NULL, &ch->dma.rfis_tag); 1110 if (error != 0) 1111 goto error; 1112 error = bus_dmamem_alloc(ch->dma.rfis_tag, (void **)&ch->dma.rfis, 0, 1113 &ch->dma.rfis_map); 1114 if (error != 0) 1115 goto error; 1116 error = bus_dmamap_load(ch->dma.rfis_tag, ch->dma.rfis_map, ch->dma.rfis, 1117 rfsize, ahci_dmasetupc_cb, &dcba, BUS_DMA_NOWAIT); 1118 if (error != 0 || (error = dcba.error) != 0) { 1119 bus_dmamem_free(ch->dma.rfis_tag, ch->dma.rfis, ch->dma.rfis_map); 1120 goto error; 1121 } 1122 ch->dma.rfis_bus = dcba.maddr; 1123 /* Data area. */ 1124 error = bus_dma_tag_create(bus_get_dma_tag(dev), 2, 0, 1125 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 1126 NULL, NULL, 1127 AHCI_SG_ENTRIES * PAGE_SIZE, AHCI_SG_ENTRIES, AHCI_PRD_MAX, 1128 0, busdma_lock_mutex, &ch->mtx, &ch->dma.data_tag); 1129 if (error != 0) 1130 goto error; 1131 return; 1132 1133 error: 1134 device_printf(dev, "WARNING - DMA initialization failed, error %d\n", 1135 error); 1136 ahci_dmafini(dev); 1137 } 1138 1139 static void 1140 ahci_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error) 1141 { 1142 struct ahci_dc_cb_args *dcba = (struct ahci_dc_cb_args *)xsc; 1143 1144 if (!(dcba->error = error)) 1145 dcba->maddr = segs[0].ds_addr; 1146 } 1147 1148 static void 1149 ahci_dmafini(device_t dev) 1150 { 1151 struct ahci_channel *ch = device_get_softc(dev); 1152 1153 if (ch->dma.data_tag) { 1154 bus_dma_tag_destroy(ch->dma.data_tag); 1155 ch->dma.data_tag = NULL; 1156 } 1157 if (ch->dma.rfis_bus) { 1158 bus_dmamap_unload(ch->dma.rfis_tag, ch->dma.rfis_map); 1159 bus_dmamem_free(ch->dma.rfis_tag, ch->dma.rfis, ch->dma.rfis_map); 1160 ch->dma.rfis_bus = 0; 1161 ch->dma.rfis = NULL; 1162 } 1163 if (ch->dma.work_bus) { 1164 bus_dmamap_unload(ch->dma.work_tag, ch->dma.work_map); 1165 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map); 1166 ch->dma.work_bus = 0; 1167 ch->dma.work = NULL; 1168 } 1169 if (ch->dma.work_tag) { 1170 bus_dma_tag_destroy(ch->dma.work_tag); 1171 ch->dma.work_tag = NULL; 1172 } 1173 } 1174 1175 static void 1176 ahci_slotsalloc(device_t dev) 1177 { 1178 struct ahci_channel *ch = device_get_softc(dev); 1179 int i; 1180 1181 /* Alloc and setup command/dma slots */ 1182 bzero(ch->slot, sizeof(ch->slot)); 1183 for (i = 0; i < ch->numslots; i++) { 1184 struct ahci_slot *slot = &ch->slot[i]; 1185 1186 slot->ch = ch; 1187 slot->slot = i; 1188 slot->state = AHCI_SLOT_EMPTY; 1189 slot->ct_offset = AHCI_CT_OFFSET + AHCI_CT_SIZE * i; 1190 slot->ccb = NULL; 1191 callout_init_mtx(&slot->timeout, &ch->mtx, 0); 1192 1193 if (bus_dmamap_create(ch->dma.data_tag, 0, &slot->dma.data_map)) 1194 device_printf(ch->dev, "FAILURE - create data_map\n"); 1195 } 1196 } 1197 1198 static void 1199 ahci_slotsfree(device_t dev) 1200 { 1201 struct ahci_channel *ch = device_get_softc(dev); 1202 int i; 1203 1204 /* Free all dma slots */ 1205 for (i = 0; i < ch->numslots; i++) { 1206 struct ahci_slot *slot = &ch->slot[i]; 1207 1208 callout_drain(&slot->timeout); 1209 if (slot->dma.data_map) { 1210 bus_dmamap_destroy(ch->dma.data_tag, slot->dma.data_map); 1211 slot->dma.data_map = NULL; 1212 } 1213 } 1214 } 1215 1216 static int 1217 ahci_phy_check_events(struct ahci_channel *ch, u_int32_t serr) 1218 { 1219 1220 if (((ch->pm_level == 0) && (serr & ATA_SE_PHY_CHANGED)) || 1221 ((ch->pm_level != 0 || ch->listening) && (serr & ATA_SE_EXCHANGED))) { 1222 u_int32_t status = ATA_INL(ch->r_mem, AHCI_P_SSTS); 1223 union ccb *ccb; 1224 1225 if (bootverbose) { 1226 if ((status & ATA_SS_DET_MASK) != ATA_SS_DET_NO_DEVICE) 1227 device_printf(ch->dev, "CONNECT requested\n"); 1228 else 1229 device_printf(ch->dev, "DISCONNECT requested\n"); 1230 } 1231 ahci_reset(ch); 1232 if ((ccb = xpt_alloc_ccb_nowait()) == NULL) 1233 return (0); 1234 if (xpt_create_path(&ccb->ccb_h.path, NULL, 1235 cam_sim_path(ch->sim), 1236 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 1237 xpt_free_ccb(ccb); 1238 return (0); 1239 } 1240 xpt_rescan(ccb); 1241 return (1); 1242 } 1243 return (0); 1244 } 1245 1246 static void 1247 ahci_cpd_check_events(struct ahci_channel *ch) 1248 { 1249 u_int32_t status; 1250 union ccb *ccb; 1251 device_t dev; 1252 1253 if (ch->pm_level == 0) 1254 return; 1255 1256 status = ATA_INL(ch->r_mem, AHCI_P_CMD); 1257 if ((status & AHCI_P_CMD_CPD) == 0) 1258 return; 1259 1260 if (bootverbose) { 1261 dev = ch->dev; 1262 if (status & AHCI_P_CMD_CPS) { 1263 device_printf(dev, "COLD CONNECT requested\n"); 1264 } else 1265 device_printf(dev, "COLD DISCONNECT requested\n"); 1266 } 1267 ahci_reset(ch); 1268 if ((ccb = xpt_alloc_ccb_nowait()) == NULL) 1269 return; 1270 if (xpt_create_path(&ccb->ccb_h.path, NULL, cam_sim_path(ch->sim), 1271 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 1272 xpt_free_ccb(ccb); 1273 return; 1274 } 1275 xpt_rescan(ccb); 1276 } 1277 1278 static void 1279 ahci_notify_events(struct ahci_channel *ch, u_int32_t status) 1280 { 1281 struct cam_path *dpath; 1282 int i; 1283 1284 if (ch->caps & AHCI_CAP_SSNTF) 1285 ATA_OUTL(ch->r_mem, AHCI_P_SNTF, status); 1286 if (bootverbose) 1287 device_printf(ch->dev, "SNTF 0x%04x\n", status); 1288 for (i = 0; i < 16; i++) { 1289 if ((status & (1 << i)) == 0) 1290 continue; 1291 if (xpt_create_path(&dpath, NULL, 1292 xpt_path_path_id(ch->path), i, 0) == CAM_REQ_CMP) { 1293 xpt_async(AC_SCSI_AEN, dpath, NULL); 1294 xpt_free_path(dpath); 1295 } 1296 } 1297 } 1298 1299 static void 1300 ahci_done(struct ahci_channel *ch, union ccb *ccb) 1301 { 1302 1303 mtx_assert(&ch->mtx, MA_OWNED); 1304 if ((ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0 || 1305 ch->batch == 0) { 1306 xpt_done(ccb); 1307 return; 1308 } 1309 1310 STAILQ_INSERT_TAIL(&ch->doneq, &ccb->ccb_h, sim_links.stqe); 1311 } 1312 1313 static void 1314 ahci_ch_intr(void *arg) 1315 { 1316 struct ahci_channel *ch = (struct ahci_channel *)arg; 1317 uint32_t istatus; 1318 1319 /* Read interrupt statuses. */ 1320 istatus = ATA_INL(ch->r_mem, AHCI_P_IS); 1321 1322 mtx_lock(&ch->mtx); 1323 ahci_ch_intr_main(ch, istatus); 1324 mtx_unlock(&ch->mtx); 1325 } 1326 1327 static void 1328 ahci_ch_intr_direct(void *arg) 1329 { 1330 struct ahci_channel *ch = (struct ahci_channel *)arg; 1331 struct ccb_hdr *ccb_h; 1332 uint32_t istatus; 1333 STAILQ_HEAD(, ccb_hdr) tmp_doneq = STAILQ_HEAD_INITIALIZER(tmp_doneq); 1334 1335 /* Read interrupt statuses. */ 1336 istatus = ATA_INL(ch->r_mem, AHCI_P_IS); 1337 1338 mtx_lock(&ch->mtx); 1339 ch->batch = 1; 1340 ahci_ch_intr_main(ch, istatus); 1341 ch->batch = 0; 1342 /* 1343 * Prevent the possibility of issues caused by processing the queue 1344 * while unlocked below by moving the contents to a local queue. 1345 */ 1346 STAILQ_CONCAT(&tmp_doneq, &ch->doneq); 1347 mtx_unlock(&ch->mtx); 1348 while ((ccb_h = STAILQ_FIRST(&tmp_doneq)) != NULL) { 1349 STAILQ_REMOVE_HEAD(&tmp_doneq, sim_links.stqe); 1350 xpt_done_direct((union ccb *)ccb_h); 1351 } 1352 } 1353 1354 static void 1355 ahci_ch_pm(void *arg) 1356 { 1357 struct ahci_channel *ch = (struct ahci_channel *)arg; 1358 uint32_t work; 1359 1360 if (ch->numrslots != 0) 1361 return; 1362 work = ATA_INL(ch->r_mem, AHCI_P_CMD); 1363 if (ch->pm_level == 4) 1364 work |= AHCI_P_CMD_PARTIAL; 1365 else 1366 work |= AHCI_P_CMD_SLUMBER; 1367 ATA_OUTL(ch->r_mem, AHCI_P_CMD, work); 1368 } 1369 1370 static void 1371 ahci_ch_intr_main(struct ahci_channel *ch, uint32_t istatus) 1372 { 1373 uint32_t cstatus, serr = 0, sntf = 0, ok, err; 1374 enum ahci_err_type et; 1375 int i, ccs, port, reset = 0; 1376 1377 /* Clear interrupt statuses. */ 1378 ATA_OUTL(ch->r_mem, AHCI_P_IS, istatus); 1379 /* Read command statuses. */ 1380 if (ch->numtslots != 0) 1381 cstatus = ATA_INL(ch->r_mem, AHCI_P_SACT); 1382 else 1383 cstatus = 0; 1384 if (ch->numrslots != ch->numtslots) 1385 cstatus |= ATA_INL(ch->r_mem, AHCI_P_CI); 1386 /* Read SNTF in one of possible ways. */ 1387 if ((istatus & AHCI_P_IX_SDB) && 1388 (ch->pm_present || ch->curr[0].atapi != 0)) { 1389 if (ch->caps & AHCI_CAP_SSNTF) 1390 sntf = ATA_INL(ch->r_mem, AHCI_P_SNTF); 1391 else if (ch->fbs_enabled) { 1392 u_int8_t *fis = ch->dma.rfis + 0x58; 1393 1394 for (i = 0; i < 16; i++) { 1395 if (fis[1] & 0x80) { 1396 fis[1] &= 0x7f; 1397 sntf |= 1 << i; 1398 } 1399 fis += 256; 1400 } 1401 } else { 1402 u_int8_t *fis = ch->dma.rfis + 0x58; 1403 1404 if (fis[1] & 0x80) 1405 sntf = (1 << (fis[1] & 0x0f)); 1406 } 1407 } 1408 /* Process PHY events */ 1409 if (istatus & (AHCI_P_IX_PC | AHCI_P_IX_PRC | AHCI_P_IX_OF | 1410 AHCI_P_IX_IF | AHCI_P_IX_HBD | AHCI_P_IX_HBF | AHCI_P_IX_TFE)) { 1411 serr = ATA_INL(ch->r_mem, AHCI_P_SERR); 1412 if (serr) { 1413 ATA_OUTL(ch->r_mem, AHCI_P_SERR, serr); 1414 reset = ahci_phy_check_events(ch, serr); 1415 } 1416 } 1417 /* Process cold presence detection events */ 1418 if ((istatus & AHCI_P_IX_CPD) && !reset) 1419 ahci_cpd_check_events(ch); 1420 /* Process command errors */ 1421 if (istatus & (AHCI_P_IX_OF | AHCI_P_IX_IF | 1422 AHCI_P_IX_HBD | AHCI_P_IX_HBF | AHCI_P_IX_TFE)) { 1423 if (ch->quirks & AHCI_Q_NOCCS) { 1424 /* 1425 * ASMedia chips sometimes report failed commands as 1426 * completed. Count all running commands as failed. 1427 */ 1428 cstatus |= ch->rslots; 1429 1430 /* They also report wrong CCS, so try to guess one. */ 1431 ccs = powerof2(cstatus) ? ffs(cstatus) - 1 : -1; 1432 } else { 1433 ccs = (ATA_INL(ch->r_mem, AHCI_P_CMD) & 1434 AHCI_P_CMD_CCS_MASK) >> AHCI_P_CMD_CCS_SHIFT; 1435 } 1436 //device_printf(dev, "%s ERROR is %08x cs %08x ss %08x rs %08x tfd %02x serr %08x fbs %08x ccs %d\n", 1437 // __func__, istatus, cstatus, sstatus, ch->rslots, ATA_INL(ch->r_mem, AHCI_P_TFD), 1438 // serr, ATA_INL(ch->r_mem, AHCI_P_FBS), ccs); 1439 port = -1; 1440 if (ch->fbs_enabled) { 1441 uint32_t fbs = ATA_INL(ch->r_mem, AHCI_P_FBS); 1442 if (fbs & AHCI_P_FBS_SDE) { 1443 port = (fbs & AHCI_P_FBS_DWE) 1444 >> AHCI_P_FBS_DWE_SHIFT; 1445 } else { 1446 for (i = 0; i < 16; i++) { 1447 if (ch->numrslotspd[i] == 0) 1448 continue; 1449 if (port == -1) 1450 port = i; 1451 else if (port != i) { 1452 port = -2; 1453 break; 1454 } 1455 } 1456 } 1457 } 1458 err = ch->rslots & cstatus; 1459 } else { 1460 ccs = 0; 1461 err = 0; 1462 port = -1; 1463 } 1464 /* Complete all successful commands. */ 1465 ok = ch->rslots & ~cstatus; 1466 for (i = 0; i < ch->numslots; i++) { 1467 if ((ok >> i) & 1) 1468 ahci_end_transaction(&ch->slot[i], AHCI_ERR_NONE); 1469 } 1470 /* On error, complete the rest of commands with error statuses. */ 1471 if (err) { 1472 if (ch->frozen) { 1473 union ccb *fccb = ch->frozen; 1474 ch->frozen = NULL; 1475 fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; 1476 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) { 1477 xpt_freeze_devq(fccb->ccb_h.path, 1); 1478 fccb->ccb_h.status |= CAM_DEV_QFRZN; 1479 } 1480 ahci_done(ch, fccb); 1481 } 1482 for (i = 0; i < ch->numslots; i++) { 1483 /* XXX: reqests in loading state. */ 1484 if (((err >> i) & 1) == 0) 1485 continue; 1486 if (port >= 0 && 1487 ch->slot[i].ccb->ccb_h.target_id != port) 1488 continue; 1489 if (istatus & AHCI_P_IX_TFE) { 1490 if (port != -2) { 1491 /* Task File Error */ 1492 if (ch->numtslotspd[ 1493 ch->slot[i].ccb->ccb_h.target_id] == 0) { 1494 /* Untagged operation. */ 1495 if (i == ccs) 1496 et = AHCI_ERR_TFE; 1497 else 1498 et = AHCI_ERR_INNOCENT; 1499 } else { 1500 /* Tagged operation. */ 1501 et = AHCI_ERR_NCQ; 1502 } 1503 } else { 1504 et = AHCI_ERR_TFE; 1505 ch->fatalerr = 1; 1506 } 1507 } else if (istatus & AHCI_P_IX_IF) { 1508 if (ch->numtslots == 0 && i != ccs && port != -2) 1509 et = AHCI_ERR_INNOCENT; 1510 else 1511 et = AHCI_ERR_SATA; 1512 } else 1513 et = AHCI_ERR_INVALID; 1514 ahci_end_transaction(&ch->slot[i], et); 1515 } 1516 /* 1517 * We can't reinit port if there are some other 1518 * commands active, use resume to complete them. 1519 */ 1520 if (ch->rslots != 0 && !ch->recoverycmd) 1521 ATA_OUTL(ch->r_mem, AHCI_P_FBS, AHCI_P_FBS_EN | AHCI_P_FBS_DEC); 1522 } 1523 /* Process NOTIFY events */ 1524 if (sntf) 1525 ahci_notify_events(ch, sntf); 1526 } 1527 1528 /* Must be called with channel locked. */ 1529 static int 1530 ahci_check_collision(struct ahci_channel *ch, union ccb *ccb) 1531 { 1532 int t = ccb->ccb_h.target_id; 1533 1534 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1535 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 1536 /* Tagged command while we have no supported tag free. */ 1537 if (((~ch->oslots) & (0xffffffff >> (32 - 1538 ch->curr[t].tags))) == 0) 1539 return (1); 1540 /* If we have FBS */ 1541 if (ch->fbs_enabled) { 1542 /* Tagged command while untagged are active. */ 1543 if (ch->numrslotspd[t] != 0 && ch->numtslotspd[t] == 0) 1544 return (1); 1545 } else { 1546 /* Tagged command while untagged are active. */ 1547 if (ch->numrslots != 0 && ch->numtslots == 0) 1548 return (1); 1549 /* Tagged command while tagged to other target is active. */ 1550 if (ch->numtslots != 0 && 1551 ch->taggedtarget != ccb->ccb_h.target_id) 1552 return (1); 1553 } 1554 } else { 1555 /* If we have FBS */ 1556 if (ch->fbs_enabled) { 1557 /* Untagged command while tagged are active. */ 1558 if (ch->numrslotspd[t] != 0 && ch->numtslotspd[t] != 0) 1559 return (1); 1560 } else { 1561 /* Untagged command while tagged are active. */ 1562 if (ch->numrslots != 0 && ch->numtslots != 0) 1563 return (1); 1564 } 1565 } 1566 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1567 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) { 1568 /* Atomic command while anything active. */ 1569 if (ch->numrslots != 0) 1570 return (1); 1571 } 1572 /* We have some atomic command running. */ 1573 if (ch->aslots != 0) 1574 return (1); 1575 return (0); 1576 } 1577 1578 /* Must be called with channel locked. */ 1579 static void 1580 ahci_begin_transaction(struct ahci_channel *ch, union ccb *ccb) 1581 { 1582 struct ahci_slot *slot; 1583 int tag, tags; 1584 1585 /* Choose empty slot. */ 1586 tags = ch->numslots; 1587 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1588 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) 1589 tags = ch->curr[ccb->ccb_h.target_id].tags; 1590 if (ch->lastslot + 1 < tags) 1591 tag = ffs(~(ch->oslots >> (ch->lastslot + 1))); 1592 else 1593 tag = 0; 1594 if (tag == 0 || tag + ch->lastslot >= tags) 1595 tag = ffs(~ch->oslots) - 1; 1596 else 1597 tag += ch->lastslot; 1598 ch->lastslot = tag; 1599 /* Occupy chosen slot. */ 1600 slot = &ch->slot[tag]; 1601 slot->ccb = ccb; 1602 /* Stop PM timer. */ 1603 if (ch->numrslots == 0 && ch->pm_level > 3) 1604 callout_stop(&ch->pm_timer); 1605 /* Update channel stats. */ 1606 ch->oslots |= (1 << tag); 1607 ch->numrslots++; 1608 ch->numrslotspd[ccb->ccb_h.target_id]++; 1609 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1610 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 1611 ch->numtslots++; 1612 ch->numtslotspd[ccb->ccb_h.target_id]++; 1613 ch->taggedtarget = ccb->ccb_h.target_id; 1614 } 1615 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1616 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) 1617 ch->aslots |= (1 << tag); 1618 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1619 slot->state = AHCI_SLOT_LOADING; 1620 bus_dmamap_load_ccb(ch->dma.data_tag, slot->dma.data_map, ccb, 1621 ahci_dmasetprd, slot, 0); 1622 } else { 1623 slot->dma.nsegs = 0; 1624 ahci_execute_transaction(slot); 1625 } 1626 } 1627 1628 /* Locked by busdma engine. */ 1629 static void 1630 ahci_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 1631 { 1632 struct ahci_slot *slot = arg; 1633 struct ahci_channel *ch = slot->ch; 1634 struct ahci_cmd_tab *ctp; 1635 struct ahci_dma_prd *prd; 1636 int i; 1637 1638 if (error) { 1639 device_printf(ch->dev, "DMA load error\n"); 1640 ahci_end_transaction(slot, AHCI_ERR_INVALID); 1641 return; 1642 } 1643 KASSERT(nsegs <= AHCI_SG_ENTRIES, ("too many DMA segment entries\n")); 1644 /* Get a piece of the workspace for this request */ 1645 ctp = (struct ahci_cmd_tab *)(ch->dma.work + slot->ct_offset); 1646 /* Fill S/G table */ 1647 prd = &ctp->prd_tab[0]; 1648 for (i = 0; i < nsegs; i++) { 1649 prd[i].dba = htole64(segs[i].ds_addr); 1650 prd[i].dbc = htole32((segs[i].ds_len - 1) & AHCI_PRD_MASK); 1651 } 1652 slot->dma.nsegs = nsegs; 1653 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, 1654 ((slot->ccb->ccb_h.flags & CAM_DIR_IN) ? 1655 BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE)); 1656 ahci_execute_transaction(slot); 1657 } 1658 1659 /* Must be called with channel locked. */ 1660 static void 1661 ahci_execute_transaction(struct ahci_slot *slot) 1662 { 1663 struct ahci_channel *ch = slot->ch; 1664 struct ahci_cmd_tab *ctp; 1665 struct ahci_cmd_list *clp; 1666 union ccb *ccb = slot->ccb; 1667 int port = ccb->ccb_h.target_id & 0x0f; 1668 int fis_size, i, softreset; 1669 uint8_t *fis = ch->dma.rfis + 0x40; 1670 uint8_t val; 1671 uint16_t cmd_flags; 1672 1673 /* Get a piece of the workspace for this request */ 1674 ctp = (struct ahci_cmd_tab *)(ch->dma.work + slot->ct_offset); 1675 /* Setup the FIS for this request */ 1676 if (!(fis_size = ahci_setup_fis(ch, ctp, ccb, slot->slot))) { 1677 device_printf(ch->dev, "Setting up SATA FIS failed\n"); 1678 ahci_end_transaction(slot, AHCI_ERR_INVALID); 1679 return; 1680 } 1681 /* Setup the command list entry */ 1682 clp = (struct ahci_cmd_list *) 1683 (ch->dma.work + AHCI_CL_OFFSET + (AHCI_CL_SIZE * slot->slot)); 1684 cmd_flags = 1685 (ccb->ccb_h.flags & CAM_DIR_OUT ? AHCI_CMD_WRITE : 0) | 1686 (ccb->ccb_h.func_code == XPT_SCSI_IO ? 1687 (AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH) : 0) | 1688 (fis_size / sizeof(u_int32_t)) | 1689 (port << 12); 1690 clp->prd_length = htole16(slot->dma.nsegs); 1691 /* Special handling for Soft Reset command. */ 1692 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1693 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL)) { 1694 if (ccb->ataio.cmd.control & ATA_A_RESET) { 1695 softreset = 1; 1696 /* Kick controller into sane state */ 1697 ahci_stop(ch); 1698 ahci_clo(ch); 1699 ahci_start(ch, 0); 1700 cmd_flags |= AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY; 1701 } else { 1702 softreset = 2; 1703 /* Prepare FIS receive area for check. */ 1704 for (i = 0; i < 20; i++) 1705 fis[i] = 0xff; 1706 } 1707 } else 1708 softreset = 0; 1709 clp->bytecount = 0; 1710 clp->cmd_flags = htole16(cmd_flags); 1711 clp->cmd_table_phys = htole64(ch->dma.work_bus + slot->ct_offset); 1712 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map, 1713 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 1714 bus_dmamap_sync(ch->dma.rfis_tag, ch->dma.rfis_map, 1715 BUS_DMASYNC_PREREAD); 1716 /* Set ACTIVE bit for NCQ commands. */ 1717 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1718 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 1719 ATA_OUTL(ch->r_mem, AHCI_P_SACT, 1 << slot->slot); 1720 } 1721 /* If FBS is enabled, set PMP port. */ 1722 if (ch->fbs_enabled) { 1723 ATA_OUTL(ch->r_mem, AHCI_P_FBS, AHCI_P_FBS_EN | 1724 (port << AHCI_P_FBS_DEV_SHIFT)); 1725 } 1726 /* Issue command to the controller. */ 1727 slot->state = AHCI_SLOT_RUNNING; 1728 ch->rslots |= (1 << slot->slot); 1729 ATA_OUTL(ch->r_mem, AHCI_P_CI, (1 << slot->slot)); 1730 /* Device reset commands doesn't interrupt. Poll them. */ 1731 if (ccb->ccb_h.func_code == XPT_ATA_IO && 1732 (ccb->ataio.cmd.command == ATA_DEVICE_RESET || softreset)) { 1733 int count, timeout = ccb->ccb_h.timeout * 100; 1734 enum ahci_err_type et = AHCI_ERR_NONE; 1735 1736 for (count = 0; count < timeout; count++) { 1737 DELAY(10); 1738 if (!(ATA_INL(ch->r_mem, AHCI_P_CI) & (1 << slot->slot))) 1739 break; 1740 if ((ATA_INL(ch->r_mem, AHCI_P_TFD) & ATA_S_ERROR) && 1741 softreset != 1) { 1742 #if 0 1743 device_printf(ch->dev, 1744 "Poll error on slot %d, TFD: %04x\n", 1745 slot->slot, ATA_INL(ch->r_mem, AHCI_P_TFD)); 1746 #endif 1747 et = AHCI_ERR_TFE; 1748 break; 1749 } 1750 /* Workaround for ATI SB600/SB700 chipsets. */ 1751 if (ccb->ccb_h.target_id == 15 && 1752 (ch->quirks & AHCI_Q_ATI_PMP_BUG) && 1753 (ATA_INL(ch->r_mem, AHCI_P_IS) & AHCI_P_IX_IPM)) { 1754 et = AHCI_ERR_TIMEOUT; 1755 break; 1756 } 1757 } 1758 1759 /* 1760 * Some Marvell controllers require additional time 1761 * after soft reset to work properly. Setup delay 1762 * to 50ms after soft reset. 1763 */ 1764 if (ch->quirks & AHCI_Q_MRVL_SR_DEL) 1765 DELAY(50000); 1766 1767 /* 1768 * Marvell HBAs with non-RAID firmware do not wait for 1769 * readiness after soft reset, so we have to wait here. 1770 * Marvell RAIDs do not have this problem, but instead 1771 * sometimes forget to update FIS receive area, breaking 1772 * this wait. 1773 */ 1774 if ((ch->quirks & AHCI_Q_NOBSYRES) == 0 && 1775 (ch->quirks & AHCI_Q_ATI_PMP_BUG) == 0 && 1776 softreset == 2 && et == AHCI_ERR_NONE) { 1777 for ( ; count < timeout; count++) { 1778 bus_dmamap_sync(ch->dma.rfis_tag, 1779 ch->dma.rfis_map, BUS_DMASYNC_POSTREAD); 1780 val = fis[2]; 1781 bus_dmamap_sync(ch->dma.rfis_tag, 1782 ch->dma.rfis_map, BUS_DMASYNC_PREREAD); 1783 if ((val & ATA_S_BUSY) == 0) 1784 break; 1785 DELAY(10); 1786 } 1787 } 1788 1789 if (timeout && (count >= timeout)) { 1790 device_printf(ch->dev, "Poll timeout on slot %d port %d\n", 1791 slot->slot, port); 1792 device_printf(ch->dev, "is %08x cs %08x ss %08x " 1793 "rs %08x tfd %02x serr %08x cmd %08x\n", 1794 ATA_INL(ch->r_mem, AHCI_P_IS), 1795 ATA_INL(ch->r_mem, AHCI_P_CI), 1796 ATA_INL(ch->r_mem, AHCI_P_SACT), ch->rslots, 1797 ATA_INL(ch->r_mem, AHCI_P_TFD), 1798 ATA_INL(ch->r_mem, AHCI_P_SERR), 1799 ATA_INL(ch->r_mem, AHCI_P_CMD)); 1800 et = AHCI_ERR_TIMEOUT; 1801 } 1802 1803 /* Kick controller into sane state and enable FBS. */ 1804 if (softreset == 2) 1805 ch->eslots |= (1 << slot->slot); 1806 ahci_end_transaction(slot, et); 1807 return; 1808 } 1809 /* Start command execution timeout */ 1810 callout_reset_sbt(&slot->timeout, SBT_1MS * ccb->ccb_h.timeout / 2, 1811 0, ahci_timeout, slot, 0); 1812 return; 1813 } 1814 1815 /* Must be called with channel locked. */ 1816 static void 1817 ahci_process_timeout(struct ahci_channel *ch) 1818 { 1819 int i; 1820 1821 mtx_assert(&ch->mtx, MA_OWNED); 1822 /* Handle the rest of commands. */ 1823 for (i = 0; i < ch->numslots; i++) { 1824 /* Do we have a running request on slot? */ 1825 if (ch->slot[i].state < AHCI_SLOT_RUNNING) 1826 continue; 1827 ahci_end_transaction(&ch->slot[i], AHCI_ERR_TIMEOUT); 1828 } 1829 } 1830 1831 /* Must be called with channel locked. */ 1832 static void 1833 ahci_rearm_timeout(struct ahci_channel *ch) 1834 { 1835 int i; 1836 1837 mtx_assert(&ch->mtx, MA_OWNED); 1838 for (i = 0; i < ch->numslots; i++) { 1839 struct ahci_slot *slot = &ch->slot[i]; 1840 1841 /* Do we have a running request on slot? */ 1842 if (slot->state < AHCI_SLOT_RUNNING) 1843 continue; 1844 if ((ch->toslots & (1 << i)) == 0) 1845 continue; 1846 callout_reset_sbt(&slot->timeout, 1847 SBT_1MS * slot->ccb->ccb_h.timeout / 2, 0, 1848 ahci_timeout, slot, 0); 1849 } 1850 } 1851 1852 /* Locked by callout mechanism. */ 1853 static void 1854 ahci_timeout(void *arg) 1855 { 1856 struct ahci_slot *slot = arg; 1857 struct ahci_channel *ch = slot->ch; 1858 device_t dev = ch->dev; 1859 uint32_t sstatus; 1860 int ccs; 1861 int i; 1862 1863 /* Check for stale timeout. */ 1864 if (slot->state < AHCI_SLOT_RUNNING) 1865 return; 1866 1867 /* Check if slot was not being executed last time we checked. */ 1868 if (slot->state < AHCI_SLOT_EXECUTING) { 1869 /* Check if slot started executing. */ 1870 sstatus = ATA_INL(ch->r_mem, AHCI_P_SACT); 1871 ccs = (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CCS_MASK) 1872 >> AHCI_P_CMD_CCS_SHIFT; 1873 if ((sstatus & (1 << slot->slot)) != 0 || ccs == slot->slot || 1874 ch->fbs_enabled || ch->wrongccs) 1875 slot->state = AHCI_SLOT_EXECUTING; 1876 else if ((ch->rslots & (1 << ccs)) == 0) { 1877 ch->wrongccs = 1; 1878 slot->state = AHCI_SLOT_EXECUTING; 1879 } 1880 1881 callout_reset_sbt(&slot->timeout, 1882 SBT_1MS * slot->ccb->ccb_h.timeout / 2, 0, 1883 ahci_timeout, slot, 0); 1884 return; 1885 } 1886 1887 device_printf(dev, "Timeout on slot %d port %d\n", 1888 slot->slot, slot->ccb->ccb_h.target_id & 0x0f); 1889 device_printf(dev, "is %08x cs %08x ss %08x rs %08x tfd %02x " 1890 "serr %08x cmd %08x\n", 1891 ATA_INL(ch->r_mem, AHCI_P_IS), ATA_INL(ch->r_mem, AHCI_P_CI), 1892 ATA_INL(ch->r_mem, AHCI_P_SACT), ch->rslots, 1893 ATA_INL(ch->r_mem, AHCI_P_TFD), ATA_INL(ch->r_mem, AHCI_P_SERR), 1894 ATA_INL(ch->r_mem, AHCI_P_CMD)); 1895 1896 /* Handle frozen command. */ 1897 if (ch->frozen) { 1898 union ccb *fccb = ch->frozen; 1899 ch->frozen = NULL; 1900 fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; 1901 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) { 1902 xpt_freeze_devq(fccb->ccb_h.path, 1); 1903 fccb->ccb_h.status |= CAM_DEV_QFRZN; 1904 } 1905 ahci_done(ch, fccb); 1906 } 1907 if (!ch->fbs_enabled && !ch->wrongccs) { 1908 /* Without FBS we know real timeout source. */ 1909 ch->fatalerr = 1; 1910 /* Handle command with timeout. */ 1911 ahci_end_transaction(&ch->slot[slot->slot], AHCI_ERR_TIMEOUT); 1912 /* Handle the rest of commands. */ 1913 for (i = 0; i < ch->numslots; i++) { 1914 /* Do we have a running request on slot? */ 1915 if (ch->slot[i].state < AHCI_SLOT_RUNNING) 1916 continue; 1917 ahci_end_transaction(&ch->slot[i], AHCI_ERR_INNOCENT); 1918 } 1919 } else { 1920 /* With FBS we wait for other commands timeout and pray. */ 1921 if (ch->toslots == 0) 1922 xpt_freeze_simq(ch->sim, 1); 1923 ch->toslots |= (1 << slot->slot); 1924 if ((ch->rslots & ~ch->toslots) == 0) 1925 ahci_process_timeout(ch); 1926 else 1927 device_printf(dev, " ... waiting for slots %08x\n", 1928 ch->rslots & ~ch->toslots); 1929 } 1930 } 1931 1932 /* Must be called with channel locked. */ 1933 static void 1934 ahci_end_transaction(struct ahci_slot *slot, enum ahci_err_type et) 1935 { 1936 struct ahci_channel *ch = slot->ch; 1937 union ccb *ccb = slot->ccb; 1938 struct ahci_cmd_list *clp; 1939 int lastto; 1940 uint32_t sig; 1941 1942 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map, 1943 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1944 clp = (struct ahci_cmd_list *) 1945 (ch->dma.work + AHCI_CL_OFFSET + (AHCI_CL_SIZE * slot->slot)); 1946 /* Read result registers to the result struct 1947 * May be incorrect if several commands finished same time, 1948 * so read only when sure or have to. 1949 */ 1950 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1951 struct ata_res *res = &ccb->ataio.res; 1952 1953 if ((et == AHCI_ERR_TFE) || 1954 (ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)) { 1955 u_int8_t *fis = ch->dma.rfis + 0x40; 1956 1957 bus_dmamap_sync(ch->dma.rfis_tag, ch->dma.rfis_map, 1958 BUS_DMASYNC_POSTREAD); 1959 if (ch->fbs_enabled) { 1960 fis += ccb->ccb_h.target_id * 256; 1961 res->status = fis[2]; 1962 res->error = fis[3]; 1963 } else { 1964 uint16_t tfd = ATA_INL(ch->r_mem, AHCI_P_TFD); 1965 1966 res->status = tfd; 1967 res->error = tfd >> 8; 1968 } 1969 res->lba_low = fis[4]; 1970 res->lba_mid = fis[5]; 1971 res->lba_high = fis[6]; 1972 res->device = fis[7]; 1973 res->lba_low_exp = fis[8]; 1974 res->lba_mid_exp = fis[9]; 1975 res->lba_high_exp = fis[10]; 1976 res->sector_count = fis[12]; 1977 res->sector_count_exp = fis[13]; 1978 1979 /* 1980 * Some weird controllers do not return signature in 1981 * FIS receive area. Read it from PxSIG register. 1982 */ 1983 if ((ch->quirks & AHCI_Q_ALTSIG) && 1984 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) && 1985 (ccb->ataio.cmd.control & ATA_A_RESET) == 0) { 1986 sig = ATA_INL(ch->r_mem, AHCI_P_SIG); 1987 res->lba_high = sig >> 24; 1988 res->lba_mid = sig >> 16; 1989 res->lba_low = sig >> 8; 1990 res->sector_count = sig; 1991 } 1992 } else 1993 bzero(res, sizeof(*res)); 1994 if ((ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) == 0 && 1995 (ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE && 1996 (ch->quirks & AHCI_Q_NOCOUNT) == 0) { 1997 ccb->ataio.resid = 1998 ccb->ataio.dxfer_len - le32toh(clp->bytecount); 1999 } 2000 } else { 2001 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE && 2002 (ch->quirks & AHCI_Q_NOCOUNT) == 0) { 2003 ccb->csio.resid = 2004 ccb->csio.dxfer_len - le32toh(clp->bytecount); 2005 } 2006 } 2007 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 2008 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, 2009 (ccb->ccb_h.flags & CAM_DIR_IN) ? 2010 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 2011 bus_dmamap_unload(ch->dma.data_tag, slot->dma.data_map); 2012 } 2013 if (et != AHCI_ERR_NONE) 2014 ch->eslots |= (1 << slot->slot); 2015 /* In case of error, freeze device for proper recovery. */ 2016 if ((et != AHCI_ERR_NONE) && (!ch->recoverycmd) && 2017 !(ccb->ccb_h.status & CAM_DEV_QFRZN)) { 2018 xpt_freeze_devq(ccb->ccb_h.path, 1); 2019 ccb->ccb_h.status |= CAM_DEV_QFRZN; 2020 } 2021 /* Set proper result status. */ 2022 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 2023 switch (et) { 2024 case AHCI_ERR_NONE: 2025 ccb->ccb_h.status |= CAM_REQ_CMP; 2026 if (ccb->ccb_h.func_code == XPT_SCSI_IO) 2027 ccb->csio.scsi_status = SCSI_STATUS_OK; 2028 break; 2029 case AHCI_ERR_INVALID: 2030 ch->fatalerr = 1; 2031 ccb->ccb_h.status |= CAM_REQ_INVALID; 2032 break; 2033 case AHCI_ERR_INNOCENT: 2034 ccb->ccb_h.status |= CAM_REQUEUE_REQ; 2035 break; 2036 case AHCI_ERR_TFE: 2037 case AHCI_ERR_NCQ: 2038 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 2039 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 2040 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2041 } else { 2042 ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR; 2043 } 2044 break; 2045 case AHCI_ERR_SATA: 2046 ch->fatalerr = 1; 2047 if (!ch->recoverycmd) { 2048 xpt_freeze_simq(ch->sim, 1); 2049 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 2050 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 2051 } 2052 ccb->ccb_h.status |= CAM_UNCOR_PARITY; 2053 break; 2054 case AHCI_ERR_TIMEOUT: 2055 if (!ch->recoverycmd) { 2056 xpt_freeze_simq(ch->sim, 1); 2057 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 2058 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 2059 } 2060 ccb->ccb_h.status |= CAM_CMD_TIMEOUT; 2061 break; 2062 default: 2063 ch->fatalerr = 1; 2064 ccb->ccb_h.status |= CAM_REQ_CMP_ERR; 2065 } 2066 /* Free slot. */ 2067 ch->oslots &= ~(1 << slot->slot); 2068 ch->rslots &= ~(1 << slot->slot); 2069 ch->aslots &= ~(1 << slot->slot); 2070 slot->state = AHCI_SLOT_EMPTY; 2071 slot->ccb = NULL; 2072 /* Update channel stats. */ 2073 ch->numrslots--; 2074 ch->numrslotspd[ccb->ccb_h.target_id]--; 2075 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 2076 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 2077 ch->numtslots--; 2078 ch->numtslotspd[ccb->ccb_h.target_id]--; 2079 } 2080 /* Cancel timeout state if request completed normally. */ 2081 if (et != AHCI_ERR_TIMEOUT) { 2082 lastto = (ch->toslots == (1 << slot->slot)); 2083 ch->toslots &= ~(1 << slot->slot); 2084 if (lastto) 2085 xpt_release_simq(ch->sim, TRUE); 2086 } 2087 /* If it was first request of reset sequence and there is no error, 2088 * proceed to second request. */ 2089 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 2090 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) && 2091 (ccb->ataio.cmd.control & ATA_A_RESET) && 2092 et == AHCI_ERR_NONE) { 2093 ccb->ataio.cmd.control &= ~ATA_A_RESET; 2094 ahci_begin_transaction(ch, ccb); 2095 return; 2096 } 2097 /* If it was our READ LOG command - process it. */ 2098 if (ccb->ccb_h.recovery_type == RECOVERY_READ_LOG) { 2099 ahci_process_read_log(ch, ccb); 2100 /* If it was our REQUEST SENSE command - process it. */ 2101 } else if (ccb->ccb_h.recovery_type == RECOVERY_REQUEST_SENSE) { 2102 ahci_process_request_sense(ch, ccb); 2103 /* If it was NCQ or ATAPI command error, put result on hold. */ 2104 } else if (et == AHCI_ERR_NCQ || 2105 ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR && 2106 (ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0)) { 2107 ch->hold[slot->slot] = ccb; 2108 ch->numhslots++; 2109 } else 2110 ahci_done(ch, ccb); 2111 /* If we have no other active commands, ... */ 2112 if (ch->rslots == 0) { 2113 /* if there was fatal error - reset port. */ 2114 if (ch->toslots != 0 || ch->fatalerr) { 2115 ahci_reset(ch); 2116 } else { 2117 /* if we have slots in error, we can reinit port. */ 2118 if (ch->eslots != 0) { 2119 ahci_stop(ch); 2120 ahci_clo(ch); 2121 ahci_start(ch, 1); 2122 } 2123 /* if there commands on hold, we can do READ LOG. */ 2124 if (!ch->recoverycmd && ch->numhslots) 2125 ahci_issue_recovery(ch); 2126 } 2127 /* If all the rest of commands are in timeout - give them chance. */ 2128 } else if ((ch->rslots & ~ch->toslots) == 0 && 2129 et != AHCI_ERR_TIMEOUT) 2130 ahci_rearm_timeout(ch); 2131 /* Unfreeze frozen command. */ 2132 if (ch->frozen && !ahci_check_collision(ch, ch->frozen)) { 2133 union ccb *fccb = ch->frozen; 2134 ch->frozen = NULL; 2135 ahci_begin_transaction(ch, fccb); 2136 xpt_release_simq(ch->sim, TRUE); 2137 } 2138 /* Start PM timer. */ 2139 if (ch->numrslots == 0 && ch->pm_level > 3 && 2140 (ch->curr[ch->pm_present ? 15 : 0].caps & CTS_SATA_CAPS_D_PMREQ)) { 2141 callout_schedule(&ch->pm_timer, 2142 (ch->pm_level == 4) ? hz / 1000 : hz / 8); 2143 } 2144 } 2145 2146 static void 2147 ahci_issue_recovery(struct ahci_channel *ch) 2148 { 2149 union ccb *ccb; 2150 struct ccb_ataio *ataio; 2151 struct ccb_scsiio *csio; 2152 int i; 2153 2154 /* Find some held command. */ 2155 for (i = 0; i < ch->numslots; i++) { 2156 if (ch->hold[i]) 2157 break; 2158 } 2159 ccb = xpt_alloc_ccb_nowait(); 2160 if (ccb == NULL) { 2161 device_printf(ch->dev, "Unable to allocate recovery command\n"); 2162 completeall: 2163 /* We can't do anything -- complete held commands. */ 2164 for (i = 0; i < ch->numslots; i++) { 2165 if (ch->hold[i] == NULL) 2166 continue; 2167 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 2168 ch->hold[i]->ccb_h.status |= CAM_RESRC_UNAVAIL; 2169 ahci_done(ch, ch->hold[i]); 2170 ch->hold[i] = NULL; 2171 ch->numhslots--; 2172 } 2173 ahci_reset(ch); 2174 return; 2175 } 2176 ccb->ccb_h = ch->hold[i]->ccb_h; /* Reuse old header. */ 2177 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 2178 /* READ LOG */ 2179 ccb->ccb_h.recovery_type = RECOVERY_READ_LOG; 2180 ccb->ccb_h.func_code = XPT_ATA_IO; 2181 ccb->ccb_h.flags = CAM_DIR_IN; 2182 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */ 2183 ataio = &ccb->ataio; 2184 ataio->data_ptr = malloc(512, M_AHCI, M_NOWAIT); 2185 if (ataio->data_ptr == NULL) { 2186 xpt_free_ccb(ccb); 2187 device_printf(ch->dev, 2188 "Unable to allocate memory for READ LOG command\n"); 2189 goto completeall; 2190 } 2191 ataio->dxfer_len = 512; 2192 bzero(&ataio->cmd, sizeof(ataio->cmd)); 2193 ataio->cmd.flags = CAM_ATAIO_48BIT; 2194 ataio->cmd.command = 0x2F; /* READ LOG EXT */ 2195 ataio->cmd.sector_count = 1; 2196 ataio->cmd.sector_count_exp = 0; 2197 ataio->cmd.lba_low = 0x10; 2198 ataio->cmd.lba_mid = 0; 2199 ataio->cmd.lba_mid_exp = 0; 2200 } else { 2201 /* REQUEST SENSE */ 2202 ccb->ccb_h.recovery_type = RECOVERY_REQUEST_SENSE; 2203 ccb->ccb_h.recovery_slot = i; 2204 ccb->ccb_h.func_code = XPT_SCSI_IO; 2205 ccb->ccb_h.flags = CAM_DIR_IN; 2206 ccb->ccb_h.status = 0; 2207 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */ 2208 csio = &ccb->csio; 2209 csio->data_ptr = (void *)&ch->hold[i]->csio.sense_data; 2210 csio->dxfer_len = ch->hold[i]->csio.sense_len; 2211 csio->cdb_len = 6; 2212 bzero(&csio->cdb_io, sizeof(csio->cdb_io)); 2213 csio->cdb_io.cdb_bytes[0] = 0x03; 2214 csio->cdb_io.cdb_bytes[4] = csio->dxfer_len; 2215 } 2216 /* Freeze SIM while doing recovery. */ 2217 ch->recoverycmd = 1; 2218 xpt_freeze_simq(ch->sim, 1); 2219 ahci_begin_transaction(ch, ccb); 2220 } 2221 2222 static void 2223 ahci_process_read_log(struct ahci_channel *ch, union ccb *ccb) 2224 { 2225 uint8_t *data; 2226 struct ata_res *res; 2227 int i; 2228 2229 ch->recoverycmd = 0; 2230 2231 data = ccb->ataio.data_ptr; 2232 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP && 2233 (data[0] & 0x80) == 0) { 2234 for (i = 0; i < ch->numslots; i++) { 2235 if (!ch->hold[i]) 2236 continue; 2237 if (ch->hold[i]->ccb_h.func_code != XPT_ATA_IO) 2238 continue; 2239 if ((data[0] & 0x1F) == i) { 2240 res = &ch->hold[i]->ataio.res; 2241 res->status = data[2]; 2242 res->error = data[3]; 2243 res->lba_low = data[4]; 2244 res->lba_mid = data[5]; 2245 res->lba_high = data[6]; 2246 res->device = data[7]; 2247 res->lba_low_exp = data[8]; 2248 res->lba_mid_exp = data[9]; 2249 res->lba_high_exp = data[10]; 2250 res->sector_count = data[12]; 2251 res->sector_count_exp = data[13]; 2252 } else { 2253 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 2254 ch->hold[i]->ccb_h.status |= CAM_REQUEUE_REQ; 2255 } 2256 ahci_done(ch, ch->hold[i]); 2257 ch->hold[i] = NULL; 2258 ch->numhslots--; 2259 } 2260 } else { 2261 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) 2262 device_printf(ch->dev, "Error while READ LOG EXT\n"); 2263 else if ((data[0] & 0x80) == 0) { 2264 device_printf(ch->dev, "Non-queued command error in READ LOG EXT\n"); 2265 } 2266 for (i = 0; i < ch->numslots; i++) { 2267 if (!ch->hold[i]) 2268 continue; 2269 if (ch->hold[i]->ccb_h.func_code != XPT_ATA_IO) 2270 continue; 2271 ahci_done(ch, ch->hold[i]); 2272 ch->hold[i] = NULL; 2273 ch->numhslots--; 2274 } 2275 } 2276 free(ccb->ataio.data_ptr, M_AHCI); 2277 xpt_free_ccb(ccb); 2278 xpt_release_simq(ch->sim, TRUE); 2279 } 2280 2281 static void 2282 ahci_process_request_sense(struct ahci_channel *ch, union ccb *ccb) 2283 { 2284 int i; 2285 2286 ch->recoverycmd = 0; 2287 2288 i = ccb->ccb_h.recovery_slot; 2289 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { 2290 ch->hold[i]->ccb_h.status |= CAM_AUTOSNS_VALID; 2291 } else { 2292 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 2293 ch->hold[i]->ccb_h.status |= CAM_AUTOSENSE_FAIL; 2294 } 2295 ahci_done(ch, ch->hold[i]); 2296 ch->hold[i] = NULL; 2297 ch->numhslots--; 2298 xpt_free_ccb(ccb); 2299 xpt_release_simq(ch->sim, TRUE); 2300 } 2301 2302 static void 2303 ahci_start(struct ahci_channel *ch, int fbs) 2304 { 2305 u_int32_t cmd; 2306 2307 /* Run the channel start callback, if any. */ 2308 if (ch->start) 2309 ch->start(ch); 2310 2311 /* Clear SATA error register */ 2312 ATA_OUTL(ch->r_mem, AHCI_P_SERR, 0xFFFFFFFF); 2313 /* Clear any interrupts pending on this channel */ 2314 ATA_OUTL(ch->r_mem, AHCI_P_IS, 0xFFFFFFFF); 2315 /* Configure FIS-based switching if supported. */ 2316 if (ch->chcaps & AHCI_P_CMD_FBSCP) { 2317 ch->fbs_enabled = (fbs && ch->pm_present) ? 1 : 0; 2318 ATA_OUTL(ch->r_mem, AHCI_P_FBS, 2319 ch->fbs_enabled ? AHCI_P_FBS_EN : 0); 2320 } 2321 /* Start operations on this channel */ 2322 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD); 2323 cmd &= ~AHCI_P_CMD_PMA; 2324 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd | AHCI_P_CMD_ST | 2325 (ch->pm_present ? AHCI_P_CMD_PMA : 0)); 2326 } 2327 2328 static void 2329 ahci_stop(struct ahci_channel *ch) 2330 { 2331 u_int32_t cmd; 2332 int timeout; 2333 2334 /* Kill all activity on this channel */ 2335 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD); 2336 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd & ~AHCI_P_CMD_ST); 2337 /* Wait for activity stop. */ 2338 timeout = 0; 2339 do { 2340 DELAY(10); 2341 if (timeout++ > 50000) { 2342 device_printf(ch->dev, "stopping AHCI engine failed\n"); 2343 break; 2344 } 2345 } while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CR); 2346 ch->eslots = 0; 2347 } 2348 2349 static void 2350 ahci_clo(struct ahci_channel *ch) 2351 { 2352 u_int32_t cmd; 2353 int timeout; 2354 2355 /* Issue Command List Override if supported */ 2356 if (ch->caps & AHCI_CAP_SCLO) { 2357 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD); 2358 cmd |= AHCI_P_CMD_CLO; 2359 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd); 2360 timeout = 0; 2361 do { 2362 DELAY(10); 2363 if (timeout++ > 50000) { 2364 device_printf(ch->dev, "executing CLO failed\n"); 2365 break; 2366 } 2367 } while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CLO); 2368 } 2369 } 2370 2371 static void 2372 ahci_stop_fr(struct ahci_channel *ch) 2373 { 2374 u_int32_t cmd; 2375 int timeout; 2376 2377 /* Kill all FIS reception on this channel */ 2378 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD); 2379 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd & ~AHCI_P_CMD_FRE); 2380 /* Wait for FIS reception stop. */ 2381 timeout = 0; 2382 do { 2383 DELAY(10); 2384 if (timeout++ > 50000) { 2385 device_printf(ch->dev, "stopping AHCI FR engine failed\n"); 2386 break; 2387 } 2388 } while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_FR); 2389 } 2390 2391 static void 2392 ahci_start_fr(struct ahci_channel *ch) 2393 { 2394 u_int32_t cmd; 2395 2396 /* Start FIS reception on this channel */ 2397 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD); 2398 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd | AHCI_P_CMD_FRE); 2399 } 2400 2401 static int 2402 ahci_wait_ready(struct ahci_channel *ch, int t, int t0) 2403 { 2404 int timeout = 0; 2405 uint32_t val; 2406 2407 while ((val = ATA_INL(ch->r_mem, AHCI_P_TFD)) & 2408 (ATA_S_BUSY | ATA_S_DRQ)) { 2409 if (timeout > t) { 2410 if (t != 0) { 2411 device_printf(ch->dev, 2412 "AHCI reset: device not ready after %dms " 2413 "(tfd = %08x)\n", 2414 MAX(t, 0) + t0, val); 2415 } 2416 return (EBUSY); 2417 } 2418 DELAY(1000); 2419 timeout++; 2420 } 2421 if (bootverbose) 2422 device_printf(ch->dev, "AHCI reset: device ready after %dms\n", 2423 timeout + t0); 2424 return (0); 2425 } 2426 2427 static void 2428 ahci_reset_to(void *arg) 2429 { 2430 struct ahci_channel *ch = arg; 2431 2432 if (ch->resetting == 0) 2433 return; 2434 ch->resetting--; 2435 if (ahci_wait_ready(ch, ch->resetting == 0 ? -1 : 0, 2436 (310 - ch->resetting) * 100) == 0) { 2437 ch->resetting = 0; 2438 ahci_start(ch, 1); 2439 xpt_release_simq(ch->sim, TRUE); 2440 return; 2441 } 2442 if (ch->resetting == 0) { 2443 ahci_clo(ch); 2444 ahci_start(ch, 1); 2445 xpt_release_simq(ch->sim, TRUE); 2446 return; 2447 } 2448 callout_schedule(&ch->reset_timer, hz / 10); 2449 } 2450 2451 static void 2452 ahci_reset(struct ahci_channel *ch) 2453 { 2454 struct ahci_controller *ctlr = device_get_softc(device_get_parent(ch->dev)); 2455 int i; 2456 2457 xpt_freeze_simq(ch->sim, 1); 2458 if (bootverbose) 2459 device_printf(ch->dev, "AHCI reset...\n"); 2460 /* Forget about previous reset. */ 2461 if (ch->resetting) { 2462 ch->resetting = 0; 2463 callout_stop(&ch->reset_timer); 2464 xpt_release_simq(ch->sim, TRUE); 2465 } 2466 /* Requeue freezed command. */ 2467 if (ch->frozen) { 2468 union ccb *fccb = ch->frozen; 2469 ch->frozen = NULL; 2470 fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; 2471 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) { 2472 xpt_freeze_devq(fccb->ccb_h.path, 1); 2473 fccb->ccb_h.status |= CAM_DEV_QFRZN; 2474 } 2475 ahci_done(ch, fccb); 2476 } 2477 /* Kill the engine and requeue all running commands. */ 2478 ahci_stop(ch); 2479 for (i = 0; i < ch->numslots; i++) { 2480 /* Do we have a running request on slot? */ 2481 if (ch->slot[i].state < AHCI_SLOT_RUNNING) 2482 continue; 2483 /* XXX; Commands in loading state. */ 2484 ahci_end_transaction(&ch->slot[i], AHCI_ERR_INNOCENT); 2485 } 2486 for (i = 0; i < ch->numslots; i++) { 2487 if (!ch->hold[i]) 2488 continue; 2489 ahci_done(ch, ch->hold[i]); 2490 ch->hold[i] = NULL; 2491 ch->numhslots--; 2492 } 2493 if (ch->toslots != 0) 2494 xpt_release_simq(ch->sim, TRUE); 2495 ch->eslots = 0; 2496 ch->toslots = 0; 2497 ch->wrongccs = 0; 2498 ch->fatalerr = 0; 2499 /* Tell the XPT about the event */ 2500 xpt_async(AC_BUS_RESET, ch->path, NULL); 2501 /* Disable port interrupts */ 2502 ATA_OUTL(ch->r_mem, AHCI_P_IE, 0); 2503 /* Reset and reconnect PHY, */ 2504 if (!ahci_sata_phy_reset(ch)) { 2505 if (bootverbose) 2506 device_printf(ch->dev, 2507 "AHCI reset: device not found\n"); 2508 ch->devices = 0; 2509 /* Enable wanted port interrupts */ 2510 ATA_OUTL(ch->r_mem, AHCI_P_IE, 2511 (((ch->pm_level != 0) ? AHCI_P_IX_CPD | AHCI_P_IX_MP : 0) | 2512 AHCI_P_IX_PRC | AHCI_P_IX_PC)); 2513 xpt_release_simq(ch->sim, TRUE); 2514 return; 2515 } 2516 if (bootverbose) 2517 device_printf(ch->dev, "AHCI reset: device found\n"); 2518 /* Wait for clearing busy status. */ 2519 if (ahci_wait_ready(ch, dumping ? 31000 : 0, 0)) { 2520 if (dumping) 2521 ahci_clo(ch); 2522 else 2523 ch->resetting = 310; 2524 } 2525 ch->devices = 1; 2526 /* Enable wanted port interrupts */ 2527 ATA_OUTL(ch->r_mem, AHCI_P_IE, 2528 (((ch->pm_level != 0) ? AHCI_P_IX_CPD | AHCI_P_IX_MP : 0) | 2529 AHCI_P_IX_TFE | AHCI_P_IX_HBF | 2530 AHCI_P_IX_HBD | AHCI_P_IX_IF | AHCI_P_IX_OF | 2531 ((ch->pm_level == 0) ? AHCI_P_IX_PRC : 0) | AHCI_P_IX_PC | 2532 AHCI_P_IX_DP | AHCI_P_IX_UF | (ctlr->ccc ? 0 : AHCI_P_IX_SDB) | 2533 AHCI_P_IX_DS | AHCI_P_IX_PS | (ctlr->ccc ? 0 : AHCI_P_IX_DHR))); 2534 if (ch->resetting) 2535 callout_reset(&ch->reset_timer, hz / 10, ahci_reset_to, ch); 2536 else { 2537 ahci_start(ch, 1); 2538 xpt_release_simq(ch->sim, TRUE); 2539 } 2540 } 2541 2542 static int 2543 ahci_setup_fis(struct ahci_channel *ch, struct ahci_cmd_tab *ctp, union ccb *ccb, int tag) 2544 { 2545 u_int8_t *fis = &ctp->cfis[0]; 2546 2547 bzero(fis, 20); 2548 fis[0] = 0x27; /* host to device */ 2549 fis[1] = (ccb->ccb_h.target_id & 0x0f); 2550 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 2551 fis[1] |= 0x80; 2552 fis[2] = ATA_PACKET_CMD; 2553 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE && 2554 ch->curr[ccb->ccb_h.target_id].mode >= ATA_DMA) 2555 fis[3] = ATA_F_DMA; 2556 else { 2557 fis[5] = ccb->csio.dxfer_len; 2558 fis[6] = ccb->csio.dxfer_len >> 8; 2559 } 2560 fis[7] = ATA_D_LBA; 2561 fis[15] = ATA_A_4BIT; 2562 bcopy((ccb->ccb_h.flags & CAM_CDB_POINTER) ? 2563 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes, 2564 ctp->acmd, ccb->csio.cdb_len); 2565 bzero(ctp->acmd + ccb->csio.cdb_len, 32 - ccb->csio.cdb_len); 2566 } else if ((ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) == 0) { 2567 fis[1] |= 0x80; 2568 fis[2] = ccb->ataio.cmd.command; 2569 fis[3] = ccb->ataio.cmd.features; 2570 fis[4] = ccb->ataio.cmd.lba_low; 2571 fis[5] = ccb->ataio.cmd.lba_mid; 2572 fis[6] = ccb->ataio.cmd.lba_high; 2573 fis[7] = ccb->ataio.cmd.device; 2574 fis[8] = ccb->ataio.cmd.lba_low_exp; 2575 fis[9] = ccb->ataio.cmd.lba_mid_exp; 2576 fis[10] = ccb->ataio.cmd.lba_high_exp; 2577 fis[11] = ccb->ataio.cmd.features_exp; 2578 fis[12] = ccb->ataio.cmd.sector_count; 2579 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 2580 fis[12] &= 0x07; 2581 fis[12] |= tag << 3; 2582 } 2583 fis[13] = ccb->ataio.cmd.sector_count_exp; 2584 if (ccb->ataio.ata_flags & ATA_FLAG_ICC) 2585 fis[14] = ccb->ataio.icc; 2586 fis[15] = ATA_A_4BIT; 2587 if (ccb->ataio.ata_flags & ATA_FLAG_AUX) { 2588 fis[16] = ccb->ataio.aux & 0xff; 2589 fis[17] = (ccb->ataio.aux >> 8) & 0xff; 2590 fis[18] = (ccb->ataio.aux >> 16) & 0xff; 2591 fis[19] = (ccb->ataio.aux >> 24) & 0xff; 2592 } 2593 } else { 2594 fis[15] = ccb->ataio.cmd.control; 2595 } 2596 return (20); 2597 } 2598 2599 static int 2600 ahci_sata_connect(struct ahci_channel *ch) 2601 { 2602 u_int32_t status; 2603 int timeout, found = 0; 2604 2605 /* Wait up to 100ms for "connect well" */ 2606 for (timeout = 0; timeout < 1000 ; timeout++) { 2607 status = ATA_INL(ch->r_mem, AHCI_P_SSTS); 2608 if ((status & ATA_SS_DET_MASK) != ATA_SS_DET_NO_DEVICE) 2609 found = 1; 2610 if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && 2611 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && 2612 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) 2613 break; 2614 if ((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_OFFLINE) { 2615 if (bootverbose) { 2616 device_printf(ch->dev, "SATA offline status=%08x\n", 2617 status); 2618 } 2619 return (0); 2620 } 2621 if (found == 0 && timeout >= 100) 2622 break; 2623 DELAY(100); 2624 } 2625 if (timeout >= 1000 || !found) { 2626 if (bootverbose) { 2627 device_printf(ch->dev, 2628 "SATA connect timeout time=%dus status=%08x\n", 2629 timeout * 100, status); 2630 } 2631 return (0); 2632 } 2633 if (bootverbose) { 2634 device_printf(ch->dev, "SATA connect time=%dus status=%08x\n", 2635 timeout * 100, status); 2636 } 2637 /* Clear SATA error register */ 2638 ATA_OUTL(ch->r_mem, AHCI_P_SERR, 0xffffffff); 2639 return (1); 2640 } 2641 2642 static int 2643 ahci_sata_phy_reset(struct ahci_channel *ch) 2644 { 2645 int sata_rev; 2646 uint32_t val, detval; 2647 2648 if (ch->listening) { 2649 val = ATA_INL(ch->r_mem, AHCI_P_CMD); 2650 val |= AHCI_P_CMD_SUD; 2651 ATA_OUTL(ch->r_mem, AHCI_P_CMD, val); 2652 ch->listening = 0; 2653 } 2654 sata_rev = ch->user[ch->pm_present ? 15 : 0].revision; 2655 if (sata_rev == 1) 2656 val = ATA_SC_SPD_SPEED_GEN1; 2657 else if (sata_rev == 2) 2658 val = ATA_SC_SPD_SPEED_GEN2; 2659 else if (sata_rev == 3) 2660 val = ATA_SC_SPD_SPEED_GEN3; 2661 else 2662 val = 0; 2663 detval = ahci_ch_detval(ch, ATA_SC_DET_RESET); 2664 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, 2665 detval | val | 2666 ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER); 2667 DELAY(1000); 2668 detval = ahci_ch_detval(ch, ATA_SC_DET_IDLE); 2669 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, 2670 detval | val | ((ch->pm_level > 0) ? 0 : 2671 (ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER))); 2672 if (!ahci_sata_connect(ch)) { 2673 if (ch->caps & AHCI_CAP_SSS) { 2674 val = ATA_INL(ch->r_mem, AHCI_P_CMD); 2675 val &= ~AHCI_P_CMD_SUD; 2676 ATA_OUTL(ch->r_mem, AHCI_P_CMD, val); 2677 ch->listening = 1; 2678 } else if (ch->pm_level > 0) 2679 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, ATA_SC_DET_DISABLE); 2680 return (0); 2681 } 2682 return (1); 2683 } 2684 2685 static int 2686 ahci_check_ids(struct ahci_channel *ch, union ccb *ccb) 2687 { 2688 2689 if (ccb->ccb_h.target_id > ((ch->caps & AHCI_CAP_SPM) ? 15 : 0)) { 2690 ccb->ccb_h.status = CAM_TID_INVALID; 2691 ahci_done(ch, ccb); 2692 return (-1); 2693 } 2694 if (ccb->ccb_h.target_lun != 0) { 2695 ccb->ccb_h.status = CAM_LUN_INVALID; 2696 ahci_done(ch, ccb); 2697 return (-1); 2698 } 2699 return (0); 2700 } 2701 2702 static void 2703 ahciaction(struct cam_sim *sim, union ccb *ccb) 2704 { 2705 struct ahci_channel *ch; 2706 2707 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("ahciaction func_code=%x\n", 2708 ccb->ccb_h.func_code)); 2709 2710 ch = (struct ahci_channel *)cam_sim_softc(sim); 2711 switch (ccb->ccb_h.func_code) { 2712 /* Common cases first */ 2713 case XPT_ATA_IO: /* Execute the requested I/O operation */ 2714 case XPT_SCSI_IO: 2715 if (ahci_check_ids(ch, ccb)) 2716 return; 2717 if (ch->devices == 0 || 2718 (ch->pm_present == 0 && 2719 ccb->ccb_h.target_id > 0 && ccb->ccb_h.target_id < 15)) { 2720 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 2721 break; 2722 } 2723 ccb->ccb_h.recovery_type = RECOVERY_NONE; 2724 /* Check for command collision. */ 2725 if (ahci_check_collision(ch, ccb)) { 2726 /* Freeze command. */ 2727 ch->frozen = ccb; 2728 /* We have only one frozen slot, so freeze simq also. */ 2729 xpt_freeze_simq(ch->sim, 1); 2730 return; 2731 } 2732 ahci_begin_transaction(ch, ccb); 2733 return; 2734 case XPT_ABORT: /* Abort the specified CCB */ 2735 /* XXX Implement */ 2736 ccb->ccb_h.status = CAM_REQ_INVALID; 2737 break; 2738 case XPT_SET_TRAN_SETTINGS: 2739 { 2740 struct ccb_trans_settings *cts = &ccb->cts; 2741 struct ahci_device *d; 2742 2743 if (ahci_check_ids(ch, ccb)) 2744 return; 2745 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) 2746 d = &ch->curr[ccb->ccb_h.target_id]; 2747 else 2748 d = &ch->user[ccb->ccb_h.target_id]; 2749 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_REVISION) 2750 d->revision = cts->xport_specific.sata.revision; 2751 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_MODE) 2752 d->mode = cts->xport_specific.sata.mode; 2753 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT) 2754 d->bytecount = min(8192, cts->xport_specific.sata.bytecount); 2755 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS) 2756 d->tags = min(ch->numslots, cts->xport_specific.sata.tags); 2757 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_PM) 2758 ch->pm_present = cts->xport_specific.sata.pm_present; 2759 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_ATAPI) 2760 d->atapi = cts->xport_specific.sata.atapi; 2761 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_CAPS) 2762 d->caps = cts->xport_specific.sata.caps; 2763 ccb->ccb_h.status = CAM_REQ_CMP; 2764 break; 2765 } 2766 case XPT_GET_TRAN_SETTINGS: 2767 /* Get default/user set transfer settings for the target */ 2768 { 2769 struct ccb_trans_settings *cts = &ccb->cts; 2770 struct ahci_device *d; 2771 uint32_t status; 2772 2773 if (ahci_check_ids(ch, ccb)) 2774 return; 2775 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) 2776 d = &ch->curr[ccb->ccb_h.target_id]; 2777 else 2778 d = &ch->user[ccb->ccb_h.target_id]; 2779 cts->protocol = PROTO_UNSPECIFIED; 2780 cts->protocol_version = PROTO_VERSION_UNSPECIFIED; 2781 cts->transport = XPORT_SATA; 2782 cts->transport_version = XPORT_VERSION_UNSPECIFIED; 2783 cts->proto_specific.valid = 0; 2784 cts->xport_specific.sata.valid = 0; 2785 if (cts->type == CTS_TYPE_CURRENT_SETTINGS && 2786 (ccb->ccb_h.target_id == 15 || 2787 (ccb->ccb_h.target_id == 0 && !ch->pm_present))) { 2788 status = ATA_INL(ch->r_mem, AHCI_P_SSTS) & ATA_SS_SPD_MASK; 2789 if (status & 0x0f0) { 2790 cts->xport_specific.sata.revision = 2791 (status & 0x0f0) >> 4; 2792 cts->xport_specific.sata.valid |= 2793 CTS_SATA_VALID_REVISION; 2794 } 2795 cts->xport_specific.sata.caps = d->caps & CTS_SATA_CAPS_D; 2796 if (ch->pm_level) { 2797 if (ch->caps & (AHCI_CAP_PSC | AHCI_CAP_SSC)) 2798 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_PMREQ; 2799 if (ch->caps2 & AHCI_CAP2_APST) 2800 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_APST; 2801 } 2802 if ((ch->caps & AHCI_CAP_SNCQ) && 2803 (ch->quirks & AHCI_Q_NOAA) == 0) 2804 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_DMAAA; 2805 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_AN; 2806 cts->xport_specific.sata.caps &= 2807 ch->user[ccb->ccb_h.target_id].caps; 2808 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS; 2809 } else { 2810 cts->xport_specific.sata.revision = d->revision; 2811 cts->xport_specific.sata.valid |= CTS_SATA_VALID_REVISION; 2812 cts->xport_specific.sata.caps = d->caps; 2813 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS; 2814 } 2815 cts->xport_specific.sata.mode = d->mode; 2816 cts->xport_specific.sata.valid |= CTS_SATA_VALID_MODE; 2817 cts->xport_specific.sata.bytecount = d->bytecount; 2818 cts->xport_specific.sata.valid |= CTS_SATA_VALID_BYTECOUNT; 2819 cts->xport_specific.sata.pm_present = ch->pm_present; 2820 cts->xport_specific.sata.valid |= CTS_SATA_VALID_PM; 2821 cts->xport_specific.sata.tags = d->tags; 2822 cts->xport_specific.sata.valid |= CTS_SATA_VALID_TAGS; 2823 cts->xport_specific.sata.atapi = d->atapi; 2824 cts->xport_specific.sata.valid |= CTS_SATA_VALID_ATAPI; 2825 ccb->ccb_h.status = CAM_REQ_CMP; 2826 break; 2827 } 2828 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 2829 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 2830 ahci_reset(ch); 2831 ccb->ccb_h.status = CAM_REQ_CMP; 2832 break; 2833 case XPT_TERM_IO: /* Terminate the I/O process */ 2834 /* XXX Implement */ 2835 ccb->ccb_h.status = CAM_REQ_INVALID; 2836 break; 2837 case XPT_PATH_INQ: /* Path routing inquiry */ 2838 { 2839 struct ccb_pathinq *cpi = &ccb->cpi; 2840 2841 cpi->version_num = 1; /* XXX??? */ 2842 cpi->hba_inquiry = PI_SDTR_ABLE; 2843 if (ch->caps & AHCI_CAP_SNCQ) 2844 cpi->hba_inquiry |= PI_TAG_ABLE; 2845 if (ch->caps & AHCI_CAP_SPM) 2846 cpi->hba_inquiry |= PI_SATAPM; 2847 cpi->target_sprt = 0; 2848 cpi->hba_misc = PIM_SEQSCAN | PIM_UNMAPPED; 2849 if ((ch->quirks & AHCI_Q_NOAUX) == 0) 2850 cpi->hba_misc |= PIM_ATA_EXT; 2851 cpi->hba_eng_cnt = 0; 2852 if (ch->caps & AHCI_CAP_SPM) 2853 cpi->max_target = 15; 2854 else 2855 cpi->max_target = 0; 2856 cpi->max_lun = 0; 2857 cpi->initiator_id = 0; 2858 cpi->bus_id = cam_sim_bus(sim); 2859 cpi->base_transfer_speed = 150000; 2860 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 2861 strlcpy(cpi->hba_vid, "AHCI", HBA_IDLEN); 2862 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 2863 cpi->unit_number = cam_sim_unit(sim); 2864 cpi->transport = XPORT_SATA; 2865 cpi->transport_version = XPORT_VERSION_UNSPECIFIED; 2866 cpi->protocol = PROTO_ATA; 2867 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED; 2868 cpi->maxio = ctob(AHCI_SG_ENTRIES - 1); 2869 /* ATI SB600 can't handle 256 sectors with FPDMA (NCQ). */ 2870 if (ch->quirks & AHCI_Q_MAXIO_64K) 2871 cpi->maxio = min(cpi->maxio, 128 * 512); 2872 cpi->hba_vendor = ch->vendorid; 2873 cpi->hba_device = ch->deviceid; 2874 cpi->hba_subvendor = ch->subvendorid; 2875 cpi->hba_subdevice = ch->subdeviceid; 2876 cpi->ccb_h.status = CAM_REQ_CMP; 2877 break; 2878 } 2879 default: 2880 ccb->ccb_h.status = CAM_REQ_INVALID; 2881 break; 2882 } 2883 ahci_done(ch, ccb); 2884 } 2885 2886 static void 2887 ahcipoll(struct cam_sim *sim) 2888 { 2889 struct ahci_channel *ch = (struct ahci_channel *)cam_sim_softc(sim); 2890 uint32_t istatus; 2891 2892 /* Read interrupt statuses and process if any. */ 2893 istatus = ATA_INL(ch->r_mem, AHCI_P_IS); 2894 if (istatus != 0) 2895 ahci_ch_intr_main(ch, istatus); 2896 if (ch->resetting != 0 && 2897 (--ch->resetpolldiv <= 0 || !callout_pending(&ch->reset_timer))) { 2898 ch->resetpolldiv = 1000; 2899 ahci_reset_to(ch); 2900 } 2901 } 2902 2903 devclass_t ahci_devclass; 2904 2905 MODULE_VERSION(ahci, 1); 2906 MODULE_DEPEND(ahci, cam, 1, 1, 1); 2907