1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2009-2012 Alexander Motin <mav@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include <sys/param.h> 33 #include <sys/module.h> 34 #include <sys/systm.h> 35 #include <sys/kernel.h> 36 #include <sys/bus.h> 37 #include <sys/conf.h> 38 #include <sys/endian.h> 39 #include <sys/malloc.h> 40 #include <sys/lock.h> 41 #include <sys/mutex.h> 42 #include <sys/sbuf.h> 43 #include <sys/sysctl.h> 44 #include <machine/stdarg.h> 45 #include <machine/resource.h> 46 #include <machine/bus.h> 47 #include <sys/rman.h> 48 #include "ahci.h" 49 50 #include <cam/cam.h> 51 #include <cam/cam_ccb.h> 52 #include <cam/cam_sim.h> 53 #include <cam/cam_xpt_sim.h> 54 #include <cam/cam_debug.h> 55 56 /* local prototypes */ 57 static void ahci_intr(void *data); 58 static void ahci_intr_one(void *data); 59 static void ahci_intr_one_edge(void *data); 60 static int ahci_ch_init(device_t dev); 61 static int ahci_ch_deinit(device_t dev); 62 static int ahci_ch_suspend(device_t dev); 63 static int ahci_ch_resume(device_t dev); 64 static void ahci_ch_pm(void *arg); 65 static void ahci_ch_intr(void *arg); 66 static void ahci_ch_intr_direct(void *arg); 67 static void ahci_ch_intr_main(struct ahci_channel *ch, uint32_t istatus); 68 static void ahci_begin_transaction(struct ahci_channel *ch, union ccb *ccb); 69 static void ahci_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error); 70 static void ahci_execute_transaction(struct ahci_slot *slot); 71 static void ahci_timeout(void *arg); 72 static void ahci_end_transaction(struct ahci_slot *slot, enum ahci_err_type et); 73 static int ahci_setup_fis(struct ahci_channel *ch, struct ahci_cmd_tab *ctp, union ccb *ccb, int tag); 74 static void ahci_dmainit(device_t dev); 75 static void ahci_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error); 76 static void ahci_dmafini(device_t dev); 77 static void ahci_slotsalloc(device_t dev); 78 static void ahci_slotsfree(device_t dev); 79 static void ahci_reset(struct ahci_channel *ch); 80 static void ahci_start(struct ahci_channel *ch, int fbs); 81 static void ahci_stop(struct ahci_channel *ch); 82 static void ahci_clo(struct ahci_channel *ch); 83 static void ahci_start_fr(struct ahci_channel *ch); 84 static void ahci_stop_fr(struct ahci_channel *ch); 85 static int ahci_phy_check_events(struct ahci_channel *ch, u_int32_t serr); 86 static uint32_t ahci_ch_detval(struct ahci_channel *ch, uint32_t val); 87 88 static int ahci_sata_connect(struct ahci_channel *ch); 89 static int ahci_sata_phy_reset(struct ahci_channel *ch); 90 static int ahci_wait_ready(struct ahci_channel *ch, int t, int t0); 91 92 static void ahci_issue_recovery(struct ahci_channel *ch); 93 static void ahci_process_read_log(struct ahci_channel *ch, union ccb *ccb); 94 static void ahci_process_request_sense(struct ahci_channel *ch, union ccb *ccb); 95 96 static void ahciaction(struct cam_sim *sim, union ccb *ccb); 97 static void ahcipoll(struct cam_sim *sim); 98 99 static MALLOC_DEFINE(M_AHCI, "AHCI driver", "AHCI driver data buffers"); 100 101 #define recovery_type spriv_field0 102 #define RECOVERY_NONE 0 103 #define RECOVERY_READ_LOG 1 104 #define RECOVERY_REQUEST_SENSE 2 105 #define recovery_slot spriv_field1 106 107 static uint32_t 108 ahci_ch_detval(struct ahci_channel *ch, uint32_t val) 109 { 110 111 return ch->disablephy ? ATA_SC_DET_DISABLE : val; 112 } 113 114 int 115 ahci_ctlr_setup(device_t dev) 116 { 117 struct ahci_controller *ctlr = device_get_softc(dev); 118 /* Clear interrupts */ 119 ATA_OUTL(ctlr->r_mem, AHCI_IS, ATA_INL(ctlr->r_mem, AHCI_IS)); 120 /* Configure CCC */ 121 if (ctlr->ccc) { 122 ATA_OUTL(ctlr->r_mem, AHCI_CCCP, ATA_INL(ctlr->r_mem, AHCI_PI)); 123 ATA_OUTL(ctlr->r_mem, AHCI_CCCC, 124 (ctlr->ccc << AHCI_CCCC_TV_SHIFT) | 125 (4 << AHCI_CCCC_CC_SHIFT) | 126 AHCI_CCCC_EN); 127 ctlr->cccv = (ATA_INL(ctlr->r_mem, AHCI_CCCC) & 128 AHCI_CCCC_INT_MASK) >> AHCI_CCCC_INT_SHIFT; 129 if (bootverbose) { 130 device_printf(dev, 131 "CCC with %dms/4cmd enabled on vector %d\n", 132 ctlr->ccc, ctlr->cccv); 133 } 134 } 135 /* Enable AHCI interrupts */ 136 ATA_OUTL(ctlr->r_mem, AHCI_GHC, 137 ATA_INL(ctlr->r_mem, AHCI_GHC) | AHCI_GHC_IE); 138 return (0); 139 } 140 141 int 142 ahci_ctlr_reset(device_t dev) 143 { 144 struct ahci_controller *ctlr = device_get_softc(dev); 145 uint32_t v; 146 int timeout; 147 148 /* BIOS/OS Handoff */ 149 if ((ATA_INL(ctlr->r_mem, AHCI_VS) >= 0x00010200) && 150 (ATA_INL(ctlr->r_mem, AHCI_CAP2) & AHCI_CAP2_BOH) && 151 ((v = ATA_INL(ctlr->r_mem, AHCI_BOHC)) & AHCI_BOHC_OOS) == 0) { 152 /* Request OS ownership. */ 153 ATA_OUTL(ctlr->r_mem, AHCI_BOHC, v | AHCI_BOHC_OOS); 154 155 /* Wait up to 2s for BIOS ownership release. */ 156 for (timeout = 0; timeout < 80; timeout++) { 157 DELAY(25000); 158 v = ATA_INL(ctlr->r_mem, AHCI_BOHC); 159 if ((v & AHCI_BOHC_BOS) == 0) 160 break; 161 if ((v & AHCI_BOHC_BB) == 0) 162 break; 163 } 164 } 165 166 /* Enable AHCI mode */ 167 ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE); 168 /* Reset AHCI controller */ 169 ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE|AHCI_GHC_HR); 170 for (timeout = 1000; timeout > 0; timeout--) { 171 DELAY(1000); 172 if ((ATA_INL(ctlr->r_mem, AHCI_GHC) & AHCI_GHC_HR) == 0) 173 break; 174 } 175 if (timeout == 0) { 176 device_printf(dev, "AHCI controller reset failure\n"); 177 return (ENXIO); 178 } 179 /* Reenable AHCI mode */ 180 ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE); 181 182 if (ctlr->quirks & AHCI_Q_RESTORE_CAP) { 183 /* 184 * Restore capability field. 185 * This is write to a read-only register to restore its state. 186 * On fully standard-compliant hardware this is not needed and 187 * this operation shall not take place. See ahci_pci.c for 188 * platforms using this quirk. 189 */ 190 ATA_OUTL(ctlr->r_mem, AHCI_CAP, ctlr->caps); 191 } 192 193 return (0); 194 } 195 196 int 197 ahci_attach(device_t dev) 198 { 199 struct ahci_controller *ctlr = device_get_softc(dev); 200 int error, i, speed, unit; 201 uint32_t u, version; 202 device_t child; 203 204 ctlr->dev = dev; 205 ctlr->ccc = 0; 206 resource_int_value(device_get_name(dev), 207 device_get_unit(dev), "ccc", &ctlr->ccc); 208 mtx_init(&ctlr->ch_mtx, "AHCI channels lock", NULL, MTX_DEF); 209 210 /* Setup our own memory management for channels. */ 211 ctlr->sc_iomem.rm_start = rman_get_start(ctlr->r_mem); 212 ctlr->sc_iomem.rm_end = rman_get_end(ctlr->r_mem); 213 ctlr->sc_iomem.rm_type = RMAN_ARRAY; 214 ctlr->sc_iomem.rm_descr = "I/O memory addresses"; 215 if ((error = rman_init(&ctlr->sc_iomem)) != 0) { 216 ahci_free_mem(dev); 217 return (error); 218 } 219 if ((error = rman_manage_region(&ctlr->sc_iomem, 220 rman_get_start(ctlr->r_mem), rman_get_end(ctlr->r_mem))) != 0) { 221 ahci_free_mem(dev); 222 rman_fini(&ctlr->sc_iomem); 223 return (error); 224 } 225 /* Get the HW capabilities */ 226 version = ATA_INL(ctlr->r_mem, AHCI_VS); 227 ctlr->caps = ATA_INL(ctlr->r_mem, AHCI_CAP); 228 if (version >= 0x00010200) 229 ctlr->caps2 = ATA_INL(ctlr->r_mem, AHCI_CAP2); 230 if (ctlr->caps & AHCI_CAP_EMS) 231 ctlr->capsem = ATA_INL(ctlr->r_mem, AHCI_EM_CTL); 232 233 if (ctlr->quirks & AHCI_Q_FORCE_PI) { 234 /* 235 * Enable ports. 236 * The spec says that BIOS sets up bits corresponding to 237 * available ports. On platforms where this information 238 * is missing, the driver can define available ports on its own. 239 */ 240 int nports = (ctlr->caps & AHCI_CAP_NPMASK) + 1; 241 int nmask = (1 << nports) - 1; 242 243 ATA_OUTL(ctlr->r_mem, AHCI_PI, nmask); 244 device_printf(dev, "Forcing PI to %d ports (mask = %x)\n", 245 nports, nmask); 246 } 247 248 ctlr->ichannels = ATA_INL(ctlr->r_mem, AHCI_PI); 249 250 /* Identify and set separate quirks for HBA and RAID f/w Marvells. */ 251 if ((ctlr->quirks & AHCI_Q_ALTSIG) && 252 (ctlr->caps & AHCI_CAP_SPM) == 0) 253 ctlr->quirks |= AHCI_Q_NOBSYRES; 254 255 if (ctlr->quirks & AHCI_Q_1CH) { 256 ctlr->caps &= ~AHCI_CAP_NPMASK; 257 ctlr->ichannels &= 0x01; 258 } 259 if (ctlr->quirks & AHCI_Q_2CH) { 260 ctlr->caps &= ~AHCI_CAP_NPMASK; 261 ctlr->caps |= 1; 262 ctlr->ichannels &= 0x03; 263 } 264 if (ctlr->quirks & AHCI_Q_4CH) { 265 ctlr->caps &= ~AHCI_CAP_NPMASK; 266 ctlr->caps |= 3; 267 ctlr->ichannels &= 0x0f; 268 } 269 ctlr->channels = MAX(flsl(ctlr->ichannels), 270 (ctlr->caps & AHCI_CAP_NPMASK) + 1); 271 if (ctlr->quirks & AHCI_Q_NOPMP) 272 ctlr->caps &= ~AHCI_CAP_SPM; 273 if (ctlr->quirks & AHCI_Q_NONCQ) 274 ctlr->caps &= ~AHCI_CAP_SNCQ; 275 if ((ctlr->caps & AHCI_CAP_CCCS) == 0) 276 ctlr->ccc = 0; 277 ctlr->emloc = ATA_INL(ctlr->r_mem, AHCI_EM_LOC); 278 279 /* Create controller-wide DMA tag. */ 280 if (bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0, 281 (ctlr->caps & AHCI_CAP_64BIT) ? BUS_SPACE_MAXADDR : 282 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 283 BUS_SPACE_MAXSIZE, BUS_SPACE_UNRESTRICTED, BUS_SPACE_MAXSIZE, 284 ctlr->dma_coherent ? BUS_DMA_COHERENT : 0, NULL, NULL, 285 &ctlr->dma_tag)) { 286 ahci_free_mem(dev); 287 rman_fini(&ctlr->sc_iomem); 288 return (ENXIO); 289 } 290 291 ahci_ctlr_setup(dev); 292 293 /* Setup interrupts. */ 294 if ((error = ahci_setup_interrupt(dev)) != 0) { 295 bus_dma_tag_destroy(ctlr->dma_tag); 296 ahci_free_mem(dev); 297 rman_fini(&ctlr->sc_iomem); 298 return (error); 299 } 300 301 i = 0; 302 for (u = ctlr->ichannels; u != 0; u >>= 1) 303 i += (u & 1); 304 ctlr->direct = (ctlr->msi && (ctlr->numirqs > 1 || i <= 3)); 305 resource_int_value(device_get_name(dev), device_get_unit(dev), 306 "direct", &ctlr->direct); 307 /* Announce HW capabilities. */ 308 speed = (ctlr->caps & AHCI_CAP_ISS) >> AHCI_CAP_ISS_SHIFT; 309 device_printf(dev, 310 "AHCI v%x.%02x with %d %sGbps ports, Port Multiplier %s%s\n", 311 ((version >> 20) & 0xf0) + ((version >> 16) & 0x0f), 312 ((version >> 4) & 0xf0) + (version & 0x0f), 313 (ctlr->caps & AHCI_CAP_NPMASK) + 1, 314 ((speed == 1) ? "1.5":((speed == 2) ? "3": 315 ((speed == 3) ? "6":"?"))), 316 (ctlr->caps & AHCI_CAP_SPM) ? 317 "supported" : "not supported", 318 (ctlr->caps & AHCI_CAP_FBSS) ? 319 " with FBS" : ""); 320 if (ctlr->quirks != 0) { 321 device_printf(dev, "quirks=0x%b\n", ctlr->quirks, 322 AHCI_Q_BIT_STRING); 323 } 324 if (bootverbose) { 325 device_printf(dev, "Caps:%s%s%s%s%s%s%s%s %sGbps", 326 (ctlr->caps & AHCI_CAP_64BIT) ? " 64bit":"", 327 (ctlr->caps & AHCI_CAP_SNCQ) ? " NCQ":"", 328 (ctlr->caps & AHCI_CAP_SSNTF) ? " SNTF":"", 329 (ctlr->caps & AHCI_CAP_SMPS) ? " MPS":"", 330 (ctlr->caps & AHCI_CAP_SSS) ? " SS":"", 331 (ctlr->caps & AHCI_CAP_SALP) ? " ALP":"", 332 (ctlr->caps & AHCI_CAP_SAL) ? " AL":"", 333 (ctlr->caps & AHCI_CAP_SCLO) ? " CLO":"", 334 ((speed == 1) ? "1.5":((speed == 2) ? "3": 335 ((speed == 3) ? "6":"?")))); 336 printf("%s%s%s%s%s%s %dcmd%s%s%s %dports\n", 337 (ctlr->caps & AHCI_CAP_SAM) ? " AM":"", 338 (ctlr->caps & AHCI_CAP_SPM) ? " PM":"", 339 (ctlr->caps & AHCI_CAP_FBSS) ? " FBS":"", 340 (ctlr->caps & AHCI_CAP_PMD) ? " PMD":"", 341 (ctlr->caps & AHCI_CAP_SSC) ? " SSC":"", 342 (ctlr->caps & AHCI_CAP_PSC) ? " PSC":"", 343 ((ctlr->caps & AHCI_CAP_NCS) >> AHCI_CAP_NCS_SHIFT) + 1, 344 (ctlr->caps & AHCI_CAP_CCCS) ? " CCC":"", 345 (ctlr->caps & AHCI_CAP_EMS) ? " EM":"", 346 (ctlr->caps & AHCI_CAP_SXS) ? " eSATA":"", 347 (ctlr->caps & AHCI_CAP_NPMASK) + 1); 348 } 349 if (bootverbose && version >= 0x00010200) { 350 device_printf(dev, "Caps2:%s%s%s%s%s%s\n", 351 (ctlr->caps2 & AHCI_CAP2_DESO) ? " DESO":"", 352 (ctlr->caps2 & AHCI_CAP2_SADM) ? " SADM":"", 353 (ctlr->caps2 & AHCI_CAP2_SDS) ? " SDS":"", 354 (ctlr->caps2 & AHCI_CAP2_APST) ? " APST":"", 355 (ctlr->caps2 & AHCI_CAP2_NVMP) ? " NVMP":"", 356 (ctlr->caps2 & AHCI_CAP2_BOH) ? " BOH":""); 357 } 358 /* Attach all channels on this controller */ 359 for (unit = 0; unit < ctlr->channels; unit++) { 360 child = device_add_child(dev, "ahcich", -1); 361 if (child == NULL) { 362 device_printf(dev, "failed to add channel device\n"); 363 continue; 364 } 365 device_set_ivars(child, (void *)(intptr_t)unit); 366 if ((ctlr->ichannels & (1 << unit)) == 0) 367 device_disable(child); 368 } 369 /* Attach any remapped NVME device */ 370 for (; unit < ctlr->channels + ctlr->remapped_devices; unit++) { 371 child = device_add_child(dev, "nvme", -1); 372 if (child == NULL) { 373 device_printf(dev, "failed to add remapped NVMe device"); 374 continue; 375 } 376 device_set_ivars(child, (void *)(intptr_t)(unit | AHCI_REMAPPED_UNIT)); 377 } 378 379 int em = (ctlr->caps & AHCI_CAP_EMS) != 0; 380 resource_int_value(device_get_name(dev), device_get_unit(dev), 381 "em", &em); 382 if (em) { 383 child = device_add_child(dev, "ahciem", -1); 384 if (child == NULL) 385 device_printf(dev, "failed to add enclosure device\n"); 386 else 387 device_set_ivars(child, (void *)(intptr_t)AHCI_EM_UNIT); 388 } 389 bus_generic_attach(dev); 390 return (0); 391 } 392 393 int 394 ahci_detach(device_t dev) 395 { 396 struct ahci_controller *ctlr = device_get_softc(dev); 397 int i; 398 399 /* Detach & delete all children */ 400 device_delete_children(dev); 401 402 /* Free interrupts. */ 403 for (i = 0; i < ctlr->numirqs; i++) { 404 if (ctlr->irqs[i].r_irq) { 405 bus_teardown_intr(dev, ctlr->irqs[i].r_irq, 406 ctlr->irqs[i].handle); 407 bus_release_resource(dev, SYS_RES_IRQ, 408 ctlr->irqs[i].r_irq_rid, ctlr->irqs[i].r_irq); 409 } 410 } 411 bus_dma_tag_destroy(ctlr->dma_tag); 412 /* Free memory. */ 413 rman_fini(&ctlr->sc_iomem); 414 ahci_free_mem(dev); 415 mtx_destroy(&ctlr->ch_mtx); 416 return (0); 417 } 418 419 void 420 ahci_free_mem(device_t dev) 421 { 422 struct ahci_controller *ctlr = device_get_softc(dev); 423 424 /* Release memory resources */ 425 if (ctlr->r_mem) 426 bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem); 427 if (ctlr->r_msix_table) 428 bus_release_resource(dev, SYS_RES_MEMORY, 429 ctlr->r_msix_tab_rid, ctlr->r_msix_table); 430 if (ctlr->r_msix_pba) 431 bus_release_resource(dev, SYS_RES_MEMORY, 432 ctlr->r_msix_pba_rid, ctlr->r_msix_pba); 433 434 ctlr->r_msix_pba = ctlr->r_mem = ctlr->r_msix_table = NULL; 435 } 436 437 int 438 ahci_setup_interrupt(device_t dev) 439 { 440 struct ahci_controller *ctlr = device_get_softc(dev); 441 int i; 442 443 /* Check for single MSI vector fallback. */ 444 if (ctlr->numirqs > 1 && 445 (ATA_INL(ctlr->r_mem, AHCI_GHC) & AHCI_GHC_MRSM) != 0) { 446 device_printf(dev, "Falling back to one MSI\n"); 447 ctlr->numirqs = 1; 448 } 449 450 /* Ensure we don't overrun irqs. */ 451 if (ctlr->numirqs > AHCI_MAX_IRQS) { 452 device_printf(dev, "Too many irqs %d > %d (clamping)\n", 453 ctlr->numirqs, AHCI_MAX_IRQS); 454 ctlr->numirqs = AHCI_MAX_IRQS; 455 } 456 457 /* Allocate all IRQs. */ 458 for (i = 0; i < ctlr->numirqs; i++) { 459 ctlr->irqs[i].ctlr = ctlr; 460 ctlr->irqs[i].r_irq_rid = i + (ctlr->msi ? 1 : 0); 461 if (ctlr->channels == 1 && !ctlr->ccc && ctlr->msi) 462 ctlr->irqs[i].mode = AHCI_IRQ_MODE_ONE; 463 else if (ctlr->numirqs == 1 || i >= ctlr->channels || 464 (ctlr->ccc && i == ctlr->cccv)) 465 ctlr->irqs[i].mode = AHCI_IRQ_MODE_ALL; 466 else if (ctlr->channels > ctlr->numirqs && 467 i == ctlr->numirqs - 1) 468 ctlr->irqs[i].mode = AHCI_IRQ_MODE_AFTER; 469 else 470 ctlr->irqs[i].mode = AHCI_IRQ_MODE_ONE; 471 if (!(ctlr->irqs[i].r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 472 &ctlr->irqs[i].r_irq_rid, RF_SHAREABLE | RF_ACTIVE))) { 473 device_printf(dev, "unable to map interrupt\n"); 474 return (ENXIO); 475 } 476 if ((bus_setup_intr(dev, ctlr->irqs[i].r_irq, ATA_INTR_FLAGS, NULL, 477 (ctlr->irqs[i].mode != AHCI_IRQ_MODE_ONE) ? ahci_intr : 478 ((ctlr->quirks & AHCI_Q_EDGEIS) ? ahci_intr_one_edge : 479 ahci_intr_one), 480 &ctlr->irqs[i], &ctlr->irqs[i].handle))) { 481 /* SOS XXX release r_irq */ 482 device_printf(dev, "unable to setup interrupt\n"); 483 return (ENXIO); 484 } 485 if (ctlr->numirqs > 1) { 486 bus_describe_intr(dev, ctlr->irqs[i].r_irq, 487 ctlr->irqs[i].handle, 488 ctlr->irqs[i].mode == AHCI_IRQ_MODE_ONE ? 489 "ch%d" : "%d", i); 490 } 491 } 492 return (0); 493 } 494 495 /* 496 * Common case interrupt handler. 497 */ 498 static void 499 ahci_intr(void *data) 500 { 501 struct ahci_controller_irq *irq = data; 502 struct ahci_controller *ctlr = irq->ctlr; 503 u_int32_t is, ise = 0; 504 void *arg; 505 int unit; 506 507 if (irq->mode == AHCI_IRQ_MODE_ALL) { 508 unit = 0; 509 if (ctlr->ccc) 510 is = ctlr->ichannels; 511 else 512 is = ATA_INL(ctlr->r_mem, AHCI_IS); 513 } else { /* AHCI_IRQ_MODE_AFTER */ 514 unit = irq->r_irq_rid - 1; 515 is = ATA_INL(ctlr->r_mem, AHCI_IS); 516 is &= (0xffffffff << unit); 517 } 518 /* CCC interrupt is edge triggered. */ 519 if (ctlr->ccc) 520 ise = 1 << ctlr->cccv; 521 /* Some controllers have edge triggered IS. */ 522 if (ctlr->quirks & AHCI_Q_EDGEIS) 523 ise |= is; 524 if (ise != 0) 525 ATA_OUTL(ctlr->r_mem, AHCI_IS, ise); 526 for (; unit < ctlr->channels; unit++) { 527 if ((is & (1 << unit)) != 0 && 528 (arg = ctlr->interrupt[unit].argument)) { 529 ctlr->interrupt[unit].function(arg); 530 } 531 } 532 for (; unit < ctlr->channels + ctlr->remapped_devices; unit++) { 533 if ((arg = ctlr->interrupt[unit].argument)) { 534 ctlr->interrupt[unit].function(arg); 535 } 536 } 537 538 /* AHCI declares level triggered IS. */ 539 if (!(ctlr->quirks & AHCI_Q_EDGEIS)) 540 ATA_OUTL(ctlr->r_mem, AHCI_IS, is); 541 ATA_RBL(ctlr->r_mem, AHCI_IS); 542 } 543 544 /* 545 * Simplified interrupt handler for multivector MSI mode. 546 */ 547 static void 548 ahci_intr_one(void *data) 549 { 550 struct ahci_controller_irq *irq = data; 551 struct ahci_controller *ctlr = irq->ctlr; 552 void *arg; 553 int unit; 554 555 unit = irq->r_irq_rid - 1; 556 if ((arg = ctlr->interrupt[unit].argument)) 557 ctlr->interrupt[unit].function(arg); 558 /* AHCI declares level triggered IS. */ 559 ATA_OUTL(ctlr->r_mem, AHCI_IS, 1 << unit); 560 ATA_RBL(ctlr->r_mem, AHCI_IS); 561 } 562 563 static void 564 ahci_intr_one_edge(void *data) 565 { 566 struct ahci_controller_irq *irq = data; 567 struct ahci_controller *ctlr = irq->ctlr; 568 void *arg; 569 int unit; 570 571 unit = irq->r_irq_rid - 1; 572 /* Some controllers have edge triggered IS. */ 573 ATA_OUTL(ctlr->r_mem, AHCI_IS, 1 << unit); 574 if ((arg = ctlr->interrupt[unit].argument)) 575 ctlr->interrupt[unit].function(arg); 576 ATA_RBL(ctlr->r_mem, AHCI_IS); 577 } 578 579 struct resource * 580 ahci_alloc_resource(device_t dev, device_t child, int type, int *rid, 581 rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) 582 { 583 struct ahci_controller *ctlr = device_get_softc(dev); 584 struct resource *res; 585 rman_res_t st; 586 int offset, size, unit; 587 bool is_em, is_remapped; 588 589 unit = (intptr_t)device_get_ivars(child); 590 is_em = is_remapped = false; 591 if (unit & AHCI_REMAPPED_UNIT) { 592 unit &= AHCI_UNIT; 593 unit -= ctlr->channels; 594 is_remapped = true; 595 } else if (unit & AHCI_EM_UNIT) { 596 unit &= AHCI_UNIT; 597 is_em = true; 598 } 599 res = NULL; 600 switch (type) { 601 case SYS_RES_MEMORY: 602 if (is_remapped) { 603 offset = ctlr->remap_offset + unit * ctlr->remap_size; 604 size = ctlr->remap_size; 605 } else if (!is_em) { 606 offset = AHCI_OFFSET + (unit << 7); 607 size = 128; 608 } else if ((ctlr->caps & AHCI_CAP_EMS) == 0) { 609 break; 610 } else if (*rid == 0) { 611 offset = AHCI_EM_CTL; 612 size = 4; 613 } else { 614 offset = (ctlr->emloc & 0xffff0000) >> 14; 615 size = (ctlr->emloc & 0x0000ffff) << 2; 616 if (*rid != 1) { 617 if (*rid == 2 && (ctlr->capsem & 618 (AHCI_EM_XMT | AHCI_EM_SMB)) == 0) 619 offset += size; 620 else 621 break; 622 } 623 } 624 st = rman_get_start(ctlr->r_mem); 625 res = rman_reserve_resource(&ctlr->sc_iomem, st + offset, 626 st + offset + size - 1, size, RF_ACTIVE, child); 627 if (res) { 628 bus_space_handle_t bsh; 629 bus_space_tag_t bst; 630 bsh = rman_get_bushandle(ctlr->r_mem); 631 bst = rman_get_bustag(ctlr->r_mem); 632 bus_space_subregion(bst, bsh, offset, 128, &bsh); 633 rman_set_bushandle(res, bsh); 634 rman_set_bustag(res, bst); 635 } 636 break; 637 case SYS_RES_IRQ: 638 if (*rid == ATA_IRQ_RID) 639 res = ctlr->irqs[0].r_irq; 640 break; 641 } 642 return (res); 643 } 644 645 int 646 ahci_release_resource(device_t dev, device_t child, int type, int rid, 647 struct resource *r) 648 { 649 650 switch (type) { 651 case SYS_RES_MEMORY: 652 rman_release_resource(r); 653 return (0); 654 case SYS_RES_IRQ: 655 if (rid != ATA_IRQ_RID) 656 return (ENOENT); 657 return (0); 658 } 659 return (EINVAL); 660 } 661 662 int 663 ahci_setup_intr(device_t dev, device_t child, struct resource *irq, 664 int flags, driver_filter_t *filter, driver_intr_t *function, 665 void *argument, void **cookiep) 666 { 667 struct ahci_controller *ctlr = device_get_softc(dev); 668 int unit = (intptr_t)device_get_ivars(child) & AHCI_UNIT; 669 670 if (filter != NULL) { 671 printf("ahci.c: we cannot use a filter here\n"); 672 return (EINVAL); 673 } 674 ctlr->interrupt[unit].function = function; 675 ctlr->interrupt[unit].argument = argument; 676 return (0); 677 } 678 679 int 680 ahci_teardown_intr(device_t dev, device_t child, struct resource *irq, 681 void *cookie) 682 { 683 struct ahci_controller *ctlr = device_get_softc(dev); 684 int unit = (intptr_t)device_get_ivars(child) & AHCI_UNIT; 685 686 ctlr->interrupt[unit].function = NULL; 687 ctlr->interrupt[unit].argument = NULL; 688 return (0); 689 } 690 691 int 692 ahci_print_child(device_t dev, device_t child) 693 { 694 intptr_t ivars; 695 int retval; 696 697 retval = bus_print_child_header(dev, child); 698 ivars = (intptr_t)device_get_ivars(child); 699 if ((ivars & AHCI_EM_UNIT) == 0) 700 retval += printf(" at channel %d", (int)ivars & AHCI_UNIT); 701 retval += bus_print_child_footer(dev, child); 702 return (retval); 703 } 704 705 int 706 ahci_child_location(device_t dev, device_t child, struct sbuf *sb) 707 { 708 intptr_t ivars; 709 710 ivars = (intptr_t)device_get_ivars(child); 711 if ((ivars & AHCI_EM_UNIT) == 0) 712 sbuf_printf(sb, "channel=%d", (int)ivars & AHCI_UNIT); 713 return (0); 714 } 715 716 bus_dma_tag_t 717 ahci_get_dma_tag(device_t dev, device_t child) 718 { 719 struct ahci_controller *ctlr = device_get_softc(dev); 720 721 return (ctlr->dma_tag); 722 } 723 724 void 725 ahci_attached(device_t dev, struct ahci_channel *ch) 726 { 727 struct ahci_controller *ctlr = device_get_softc(dev); 728 729 mtx_lock(&ctlr->ch_mtx); 730 ctlr->ch[ch->unit] = ch; 731 mtx_unlock(&ctlr->ch_mtx); 732 } 733 734 void 735 ahci_detached(device_t dev, struct ahci_channel *ch) 736 { 737 struct ahci_controller *ctlr = device_get_softc(dev); 738 739 mtx_lock(&ctlr->ch_mtx); 740 mtx_lock(&ch->mtx); 741 ctlr->ch[ch->unit] = NULL; 742 mtx_unlock(&ch->mtx); 743 mtx_unlock(&ctlr->ch_mtx); 744 } 745 746 struct ahci_channel * 747 ahci_getch(device_t dev, int n) 748 { 749 struct ahci_controller *ctlr = device_get_softc(dev); 750 struct ahci_channel *ch; 751 752 KASSERT(n >= 0 && n < AHCI_MAX_PORTS, ("Bad channel number %d", n)); 753 mtx_lock(&ctlr->ch_mtx); 754 ch = ctlr->ch[n]; 755 if (ch != NULL) 756 mtx_lock(&ch->mtx); 757 mtx_unlock(&ctlr->ch_mtx); 758 return (ch); 759 } 760 761 void 762 ahci_putch(struct ahci_channel *ch) 763 { 764 765 mtx_unlock(&ch->mtx); 766 } 767 768 static int 769 ahci_ch_probe(device_t dev) 770 { 771 772 device_set_desc_copy(dev, "AHCI channel"); 773 return (BUS_PROBE_DEFAULT); 774 } 775 776 static int 777 ahci_ch_disablephy_proc(SYSCTL_HANDLER_ARGS) 778 { 779 struct ahci_channel *ch; 780 int error, value; 781 782 ch = arg1; 783 value = ch->disablephy; 784 error = sysctl_handle_int(oidp, &value, 0, req); 785 if (error != 0 || req->newptr == NULL || (value != 0 && value != 1)) 786 return (error); 787 788 mtx_lock(&ch->mtx); 789 ch->disablephy = value; 790 if (value) { 791 ahci_ch_deinit(ch->dev); 792 } else { 793 ahci_ch_init(ch->dev); 794 ahci_phy_check_events(ch, ATA_SE_PHY_CHANGED | ATA_SE_EXCHANGED); 795 } 796 mtx_unlock(&ch->mtx); 797 798 return (0); 799 } 800 801 static int 802 ahci_ch_attach(device_t dev) 803 { 804 struct ahci_controller *ctlr = device_get_softc(device_get_parent(dev)); 805 struct ahci_channel *ch = device_get_softc(dev); 806 struct cam_devq *devq; 807 struct sysctl_ctx_list *ctx; 808 struct sysctl_oid *tree; 809 int rid, error, i, sata_rev = 0; 810 u_int32_t version; 811 812 ch->dev = dev; 813 ch->unit = (intptr_t)device_get_ivars(dev); 814 ch->caps = ctlr->caps; 815 ch->caps2 = ctlr->caps2; 816 ch->start = ctlr->ch_start; 817 ch->quirks = ctlr->quirks; 818 ch->vendorid = ctlr->vendorid; 819 ch->deviceid = ctlr->deviceid; 820 ch->subvendorid = ctlr->subvendorid; 821 ch->subdeviceid = ctlr->subdeviceid; 822 ch->numslots = ((ch->caps & AHCI_CAP_NCS) >> AHCI_CAP_NCS_SHIFT) + 1; 823 mtx_init(&ch->mtx, "AHCI channel lock", NULL, MTX_DEF); 824 ch->pm_level = 0; 825 resource_int_value(device_get_name(dev), 826 device_get_unit(dev), "pm_level", &ch->pm_level); 827 STAILQ_INIT(&ch->doneq); 828 if (ch->pm_level > 3) 829 callout_init_mtx(&ch->pm_timer, &ch->mtx, 0); 830 callout_init_mtx(&ch->reset_timer, &ch->mtx, 0); 831 /* JMicron external ports (0) sometimes limited */ 832 if ((ctlr->quirks & AHCI_Q_SATA1_UNIT0) && ch->unit == 0) 833 sata_rev = 1; 834 if (ch->quirks & AHCI_Q_SATA2) 835 sata_rev = 2; 836 resource_int_value(device_get_name(dev), 837 device_get_unit(dev), "sata_rev", &sata_rev); 838 for (i = 0; i < 16; i++) { 839 ch->user[i].revision = sata_rev; 840 ch->user[i].mode = 0; 841 ch->user[i].bytecount = 8192; 842 ch->user[i].tags = ch->numslots; 843 ch->user[i].caps = 0; 844 ch->curr[i] = ch->user[i]; 845 if (ch->pm_level) { 846 ch->user[i].caps = CTS_SATA_CAPS_H_PMREQ | 847 CTS_SATA_CAPS_H_APST | 848 CTS_SATA_CAPS_D_PMREQ | CTS_SATA_CAPS_D_APST; 849 } 850 ch->user[i].caps |= CTS_SATA_CAPS_H_DMAAA | 851 CTS_SATA_CAPS_H_AN; 852 } 853 rid = 0; 854 if (!(ch->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 855 &rid, RF_ACTIVE))) 856 return (ENXIO); 857 ch->chcaps = ATA_INL(ch->r_mem, AHCI_P_CMD); 858 version = ATA_INL(ctlr->r_mem, AHCI_VS); 859 if (version < 0x00010200 && (ctlr->caps & AHCI_CAP_FBSS)) 860 ch->chcaps |= AHCI_P_CMD_FBSCP; 861 if (ch->caps2 & AHCI_CAP2_SDS) 862 ch->chscaps = ATA_INL(ch->r_mem, AHCI_P_DEVSLP); 863 if (bootverbose) { 864 device_printf(dev, "Caps:%s%s%s%s%s%s\n", 865 (ch->chcaps & AHCI_P_CMD_HPCP) ? " HPCP":"", 866 (ch->chcaps & AHCI_P_CMD_MPSP) ? " MPSP":"", 867 (ch->chcaps & AHCI_P_CMD_CPD) ? " CPD":"", 868 (ch->chcaps & AHCI_P_CMD_ESP) ? " ESP":"", 869 (ch->chcaps & AHCI_P_CMD_FBSCP) ? " FBSCP":"", 870 (ch->chscaps & AHCI_P_DEVSLP_DSP) ? " DSP":""); 871 } 872 ahci_dmainit(dev); 873 ahci_slotsalloc(dev); 874 mtx_lock(&ch->mtx); 875 ahci_ch_init(dev); 876 rid = ATA_IRQ_RID; 877 if (!(ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 878 &rid, RF_SHAREABLE | RF_ACTIVE))) { 879 device_printf(dev, "Unable to map interrupt\n"); 880 error = ENXIO; 881 goto err0; 882 } 883 if ((bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS, NULL, 884 ctlr->direct ? ahci_ch_intr_direct : ahci_ch_intr, 885 ch, &ch->ih))) { 886 device_printf(dev, "Unable to setup interrupt\n"); 887 error = ENXIO; 888 goto err1; 889 } 890 /* Create the device queue for our SIM. */ 891 devq = cam_simq_alloc(ch->numslots); 892 if (devq == NULL) { 893 device_printf(dev, "Unable to allocate simq\n"); 894 error = ENOMEM; 895 goto err1; 896 } 897 /* Construct SIM entry */ 898 ch->sim = cam_sim_alloc(ahciaction, ahcipoll, "ahcich", ch, 899 device_get_unit(dev), (struct mtx *)&ch->mtx, 900 (ch->quirks & AHCI_Q_NOCCS) ? 1 : min(2, ch->numslots), 901 (ch->caps & AHCI_CAP_SNCQ) ? ch->numslots : 0, 902 devq); 903 if (ch->sim == NULL) { 904 cam_simq_free(devq); 905 device_printf(dev, "unable to allocate sim\n"); 906 error = ENOMEM; 907 goto err1; 908 } 909 if (xpt_bus_register(ch->sim, dev, 0) != CAM_SUCCESS) { 910 device_printf(dev, "unable to register xpt bus\n"); 911 error = ENXIO; 912 goto err2; 913 } 914 if (xpt_create_path(&ch->path, /*periph*/NULL, cam_sim_path(ch->sim), 915 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 916 device_printf(dev, "unable to create path\n"); 917 error = ENXIO; 918 goto err3; 919 } 920 if (ch->pm_level > 3) { 921 callout_reset(&ch->pm_timer, 922 (ch->pm_level == 4) ? hz / 1000 : hz / 8, 923 ahci_ch_pm, ch); 924 } 925 mtx_unlock(&ch->mtx); 926 ahci_attached(device_get_parent(dev), ch); 927 ctx = device_get_sysctl_ctx(dev); 928 tree = device_get_sysctl_tree(dev); 929 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "disable_phy", 930 CTLFLAG_RW | CTLTYPE_UINT | CTLFLAG_MPSAFE, ch, 931 0, ahci_ch_disablephy_proc, "IU", "Disable PHY"); 932 return (0); 933 934 err3: 935 xpt_bus_deregister(cam_sim_path(ch->sim)); 936 err2: 937 cam_sim_free(ch->sim, /*free_devq*/TRUE); 938 err1: 939 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); 940 err0: 941 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); 942 mtx_unlock(&ch->mtx); 943 mtx_destroy(&ch->mtx); 944 return (error); 945 } 946 947 static int 948 ahci_ch_detach(device_t dev) 949 { 950 struct ahci_channel *ch = device_get_softc(dev); 951 952 ahci_detached(device_get_parent(dev), ch); 953 mtx_lock(&ch->mtx); 954 xpt_async(AC_LOST_DEVICE, ch->path, NULL); 955 /* Forget about reset. */ 956 if (ch->resetting) { 957 ch->resetting = 0; 958 xpt_release_simq(ch->sim, TRUE); 959 } 960 xpt_free_path(ch->path); 961 xpt_bus_deregister(cam_sim_path(ch->sim)); 962 cam_sim_free(ch->sim, /*free_devq*/TRUE); 963 mtx_unlock(&ch->mtx); 964 965 if (ch->pm_level > 3) 966 callout_drain(&ch->pm_timer); 967 callout_drain(&ch->reset_timer); 968 bus_teardown_intr(dev, ch->r_irq, ch->ih); 969 bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq); 970 971 ahci_ch_deinit(dev); 972 ahci_slotsfree(dev); 973 ahci_dmafini(dev); 974 975 bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem); 976 mtx_destroy(&ch->mtx); 977 return (0); 978 } 979 980 static int 981 ahci_ch_init(device_t dev) 982 { 983 struct ahci_channel *ch = device_get_softc(dev); 984 uint64_t work; 985 986 /* Disable port interrupts */ 987 ATA_OUTL(ch->r_mem, AHCI_P_IE, 0); 988 /* Setup work areas */ 989 work = ch->dma.work_bus + AHCI_CL_OFFSET; 990 ATA_OUTL(ch->r_mem, AHCI_P_CLB, work & 0xffffffff); 991 ATA_OUTL(ch->r_mem, AHCI_P_CLBU, work >> 32); 992 work = ch->dma.rfis_bus; 993 ATA_OUTL(ch->r_mem, AHCI_P_FB, work & 0xffffffff); 994 ATA_OUTL(ch->r_mem, AHCI_P_FBU, work >> 32); 995 /* Activate the channel and power/spin up device */ 996 ATA_OUTL(ch->r_mem, AHCI_P_CMD, 997 (AHCI_P_CMD_ACTIVE | AHCI_P_CMD_POD | AHCI_P_CMD_SUD | 998 ((ch->pm_level == 2 || ch->pm_level == 3) ? AHCI_P_CMD_ALPE : 0) | 999 ((ch->pm_level > 2) ? AHCI_P_CMD_ASP : 0 ))); 1000 ahci_start_fr(ch); 1001 ahci_start(ch, 1); 1002 return (0); 1003 } 1004 1005 static int 1006 ahci_ch_deinit(device_t dev) 1007 { 1008 struct ahci_channel *ch = device_get_softc(dev); 1009 1010 /* Disable port interrupts. */ 1011 ATA_OUTL(ch->r_mem, AHCI_P_IE, 0); 1012 /* Reset command register. */ 1013 ahci_stop(ch); 1014 ahci_stop_fr(ch); 1015 ATA_OUTL(ch->r_mem, AHCI_P_CMD, 0); 1016 /* Allow everything, including partial and slumber modes. */ 1017 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, 0); 1018 /* Request slumber mode transition and give some time to get there. */ 1019 ATA_OUTL(ch->r_mem, AHCI_P_CMD, AHCI_P_CMD_SLUMBER); 1020 DELAY(100); 1021 /* Disable PHY. */ 1022 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, ATA_SC_DET_DISABLE); 1023 return (0); 1024 } 1025 1026 static int 1027 ahci_ch_suspend(device_t dev) 1028 { 1029 struct ahci_channel *ch = device_get_softc(dev); 1030 1031 mtx_lock(&ch->mtx); 1032 xpt_freeze_simq(ch->sim, 1); 1033 /* Forget about reset. */ 1034 if (ch->resetting) { 1035 ch->resetting = 0; 1036 callout_stop(&ch->reset_timer); 1037 xpt_release_simq(ch->sim, TRUE); 1038 } 1039 while (ch->oslots) 1040 msleep(ch, &ch->mtx, PRIBIO, "ahcisusp", hz/100); 1041 ahci_ch_deinit(dev); 1042 mtx_unlock(&ch->mtx); 1043 return (0); 1044 } 1045 1046 static int 1047 ahci_ch_resume(device_t dev) 1048 { 1049 struct ahci_channel *ch = device_get_softc(dev); 1050 1051 mtx_lock(&ch->mtx); 1052 ahci_ch_init(dev); 1053 ahci_reset(ch); 1054 xpt_release_simq(ch->sim, TRUE); 1055 mtx_unlock(&ch->mtx); 1056 return (0); 1057 } 1058 1059 devclass_t ahcich_devclass; 1060 static device_method_t ahcich_methods[] = { 1061 DEVMETHOD(device_probe, ahci_ch_probe), 1062 DEVMETHOD(device_attach, ahci_ch_attach), 1063 DEVMETHOD(device_detach, ahci_ch_detach), 1064 DEVMETHOD(device_suspend, ahci_ch_suspend), 1065 DEVMETHOD(device_resume, ahci_ch_resume), 1066 DEVMETHOD_END 1067 }; 1068 static driver_t ahcich_driver = { 1069 "ahcich", 1070 ahcich_methods, 1071 sizeof(struct ahci_channel) 1072 }; 1073 DRIVER_MODULE(ahcich, ahci, ahcich_driver, ahcich_devclass, NULL, NULL); 1074 1075 struct ahci_dc_cb_args { 1076 bus_addr_t maddr; 1077 int error; 1078 }; 1079 1080 static void 1081 ahci_dmainit(device_t dev) 1082 { 1083 struct ahci_channel *ch = device_get_softc(dev); 1084 struct ahci_dc_cb_args dcba; 1085 size_t rfsize; 1086 int error; 1087 1088 /* Command area. */ 1089 error = bus_dma_tag_create(bus_get_dma_tag(dev), 1024, 0, 1090 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 1091 NULL, NULL, AHCI_WORK_SIZE, 1, AHCI_WORK_SIZE, 1092 0, NULL, NULL, &ch->dma.work_tag); 1093 if (error != 0) 1094 goto error; 1095 error = bus_dmamem_alloc(ch->dma.work_tag, (void **)&ch->dma.work, 1096 BUS_DMA_ZERO, &ch->dma.work_map); 1097 if (error != 0) 1098 goto error; 1099 error = bus_dmamap_load(ch->dma.work_tag, ch->dma.work_map, ch->dma.work, 1100 AHCI_WORK_SIZE, ahci_dmasetupc_cb, &dcba, BUS_DMA_NOWAIT); 1101 if (error != 0 || (error = dcba.error) != 0) { 1102 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map); 1103 goto error; 1104 } 1105 ch->dma.work_bus = dcba.maddr; 1106 /* FIS receive area. */ 1107 if (ch->chcaps & AHCI_P_CMD_FBSCP) 1108 rfsize = 4096; 1109 else 1110 rfsize = 256; 1111 error = bus_dma_tag_create(bus_get_dma_tag(dev), rfsize, 0, 1112 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 1113 NULL, NULL, rfsize, 1, rfsize, 1114 0, NULL, NULL, &ch->dma.rfis_tag); 1115 if (error != 0) 1116 goto error; 1117 error = bus_dmamem_alloc(ch->dma.rfis_tag, (void **)&ch->dma.rfis, 0, 1118 &ch->dma.rfis_map); 1119 if (error != 0) 1120 goto error; 1121 error = bus_dmamap_load(ch->dma.rfis_tag, ch->dma.rfis_map, ch->dma.rfis, 1122 rfsize, ahci_dmasetupc_cb, &dcba, BUS_DMA_NOWAIT); 1123 if (error != 0 || (error = dcba.error) != 0) { 1124 bus_dmamem_free(ch->dma.rfis_tag, ch->dma.rfis, ch->dma.rfis_map); 1125 goto error; 1126 } 1127 ch->dma.rfis_bus = dcba.maddr; 1128 /* Data area. */ 1129 error = bus_dma_tag_create(bus_get_dma_tag(dev), 2, 0, 1130 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, 1131 NULL, NULL, 1132 AHCI_SG_ENTRIES * PAGE_SIZE, AHCI_SG_ENTRIES, AHCI_PRD_MAX, 1133 0, busdma_lock_mutex, &ch->mtx, &ch->dma.data_tag); 1134 if (error != 0) 1135 goto error; 1136 return; 1137 1138 error: 1139 device_printf(dev, "WARNING - DMA initialization failed, error %d\n", 1140 error); 1141 ahci_dmafini(dev); 1142 } 1143 1144 static void 1145 ahci_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error) 1146 { 1147 struct ahci_dc_cb_args *dcba = (struct ahci_dc_cb_args *)xsc; 1148 1149 if (!(dcba->error = error)) 1150 dcba->maddr = segs[0].ds_addr; 1151 } 1152 1153 static void 1154 ahci_dmafini(device_t dev) 1155 { 1156 struct ahci_channel *ch = device_get_softc(dev); 1157 1158 if (ch->dma.data_tag) { 1159 bus_dma_tag_destroy(ch->dma.data_tag); 1160 ch->dma.data_tag = NULL; 1161 } 1162 if (ch->dma.rfis_bus) { 1163 bus_dmamap_unload(ch->dma.rfis_tag, ch->dma.rfis_map); 1164 bus_dmamem_free(ch->dma.rfis_tag, ch->dma.rfis, ch->dma.rfis_map); 1165 ch->dma.rfis_bus = 0; 1166 ch->dma.rfis = NULL; 1167 } 1168 if (ch->dma.work_bus) { 1169 bus_dmamap_unload(ch->dma.work_tag, ch->dma.work_map); 1170 bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map); 1171 ch->dma.work_bus = 0; 1172 ch->dma.work = NULL; 1173 } 1174 if (ch->dma.work_tag) { 1175 bus_dma_tag_destroy(ch->dma.work_tag); 1176 ch->dma.work_tag = NULL; 1177 } 1178 } 1179 1180 static void 1181 ahci_slotsalloc(device_t dev) 1182 { 1183 struct ahci_channel *ch = device_get_softc(dev); 1184 int i; 1185 1186 /* Alloc and setup command/dma slots */ 1187 bzero(ch->slot, sizeof(ch->slot)); 1188 for (i = 0; i < ch->numslots; i++) { 1189 struct ahci_slot *slot = &ch->slot[i]; 1190 1191 slot->ch = ch; 1192 slot->slot = i; 1193 slot->state = AHCI_SLOT_EMPTY; 1194 slot->ct_offset = AHCI_CT_OFFSET + AHCI_CT_SIZE * i; 1195 slot->ccb = NULL; 1196 callout_init_mtx(&slot->timeout, &ch->mtx, 0); 1197 1198 if (bus_dmamap_create(ch->dma.data_tag, 0, &slot->dma.data_map)) 1199 device_printf(ch->dev, "FAILURE - create data_map\n"); 1200 } 1201 } 1202 1203 static void 1204 ahci_slotsfree(device_t dev) 1205 { 1206 struct ahci_channel *ch = device_get_softc(dev); 1207 int i; 1208 1209 /* Free all dma slots */ 1210 for (i = 0; i < ch->numslots; i++) { 1211 struct ahci_slot *slot = &ch->slot[i]; 1212 1213 callout_drain(&slot->timeout); 1214 if (slot->dma.data_map) { 1215 bus_dmamap_destroy(ch->dma.data_tag, slot->dma.data_map); 1216 slot->dma.data_map = NULL; 1217 } 1218 } 1219 } 1220 1221 static int 1222 ahci_phy_check_events(struct ahci_channel *ch, u_int32_t serr) 1223 { 1224 1225 if (((ch->pm_level == 0) && (serr & ATA_SE_PHY_CHANGED)) || 1226 ((ch->pm_level != 0 || ch->listening) && (serr & ATA_SE_EXCHANGED))) { 1227 u_int32_t status = ATA_INL(ch->r_mem, AHCI_P_SSTS); 1228 union ccb *ccb; 1229 1230 if (bootverbose) { 1231 if ((status & ATA_SS_DET_MASK) != ATA_SS_DET_NO_DEVICE) 1232 device_printf(ch->dev, "CONNECT requested\n"); 1233 else 1234 device_printf(ch->dev, "DISCONNECT requested\n"); 1235 } 1236 ahci_reset(ch); 1237 if ((ccb = xpt_alloc_ccb_nowait()) == NULL) 1238 return (0); 1239 if (xpt_create_path(&ccb->ccb_h.path, NULL, 1240 cam_sim_path(ch->sim), 1241 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 1242 xpt_free_ccb(ccb); 1243 return (0); 1244 } 1245 xpt_rescan(ccb); 1246 return (1); 1247 } 1248 return (0); 1249 } 1250 1251 static void 1252 ahci_cpd_check_events(struct ahci_channel *ch) 1253 { 1254 u_int32_t status; 1255 union ccb *ccb; 1256 device_t dev; 1257 1258 if (ch->pm_level == 0) 1259 return; 1260 1261 status = ATA_INL(ch->r_mem, AHCI_P_CMD); 1262 if ((status & AHCI_P_CMD_CPD) == 0) 1263 return; 1264 1265 if (bootverbose) { 1266 dev = ch->dev; 1267 if (status & AHCI_P_CMD_CPS) { 1268 device_printf(dev, "COLD CONNECT requested\n"); 1269 } else 1270 device_printf(dev, "COLD DISCONNECT requested\n"); 1271 } 1272 ahci_reset(ch); 1273 if ((ccb = xpt_alloc_ccb_nowait()) == NULL) 1274 return; 1275 if (xpt_create_path(&ccb->ccb_h.path, NULL, cam_sim_path(ch->sim), 1276 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 1277 xpt_free_ccb(ccb); 1278 return; 1279 } 1280 xpt_rescan(ccb); 1281 } 1282 1283 static void 1284 ahci_notify_events(struct ahci_channel *ch, u_int32_t status) 1285 { 1286 struct cam_path *dpath; 1287 int i; 1288 1289 if (ch->caps & AHCI_CAP_SSNTF) 1290 ATA_OUTL(ch->r_mem, AHCI_P_SNTF, status); 1291 if (bootverbose) 1292 device_printf(ch->dev, "SNTF 0x%04x\n", status); 1293 for (i = 0; i < 16; i++) { 1294 if ((status & (1 << i)) == 0) 1295 continue; 1296 if (xpt_create_path(&dpath, NULL, 1297 xpt_path_path_id(ch->path), i, 0) == CAM_REQ_CMP) { 1298 xpt_async(AC_SCSI_AEN, dpath, NULL); 1299 xpt_free_path(dpath); 1300 } 1301 } 1302 } 1303 1304 static void 1305 ahci_done(struct ahci_channel *ch, union ccb *ccb) 1306 { 1307 1308 mtx_assert(&ch->mtx, MA_OWNED); 1309 if ((ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0 || 1310 ch->batch == 0) { 1311 xpt_done(ccb); 1312 return; 1313 } 1314 1315 STAILQ_INSERT_TAIL(&ch->doneq, &ccb->ccb_h, sim_links.stqe); 1316 } 1317 1318 static void 1319 ahci_ch_intr(void *arg) 1320 { 1321 struct ahci_channel *ch = (struct ahci_channel *)arg; 1322 uint32_t istatus; 1323 1324 /* Read interrupt statuses. */ 1325 istatus = ATA_INL(ch->r_mem, AHCI_P_IS); 1326 1327 mtx_lock(&ch->mtx); 1328 ahci_ch_intr_main(ch, istatus); 1329 mtx_unlock(&ch->mtx); 1330 } 1331 1332 static void 1333 ahci_ch_intr_direct(void *arg) 1334 { 1335 struct ahci_channel *ch = (struct ahci_channel *)arg; 1336 struct ccb_hdr *ccb_h; 1337 uint32_t istatus; 1338 STAILQ_HEAD(, ccb_hdr) tmp_doneq = STAILQ_HEAD_INITIALIZER(tmp_doneq); 1339 1340 /* Read interrupt statuses. */ 1341 istatus = ATA_INL(ch->r_mem, AHCI_P_IS); 1342 1343 mtx_lock(&ch->mtx); 1344 ch->batch = 1; 1345 ahci_ch_intr_main(ch, istatus); 1346 ch->batch = 0; 1347 /* 1348 * Prevent the possibility of issues caused by processing the queue 1349 * while unlocked below by moving the contents to a local queue. 1350 */ 1351 STAILQ_CONCAT(&tmp_doneq, &ch->doneq); 1352 mtx_unlock(&ch->mtx); 1353 while ((ccb_h = STAILQ_FIRST(&tmp_doneq)) != NULL) { 1354 STAILQ_REMOVE_HEAD(&tmp_doneq, sim_links.stqe); 1355 xpt_done_direct((union ccb *)ccb_h); 1356 } 1357 } 1358 1359 static void 1360 ahci_ch_pm(void *arg) 1361 { 1362 struct ahci_channel *ch = (struct ahci_channel *)arg; 1363 uint32_t work; 1364 1365 if (ch->numrslots != 0) 1366 return; 1367 work = ATA_INL(ch->r_mem, AHCI_P_CMD); 1368 if (ch->pm_level == 4) 1369 work |= AHCI_P_CMD_PARTIAL; 1370 else 1371 work |= AHCI_P_CMD_SLUMBER; 1372 ATA_OUTL(ch->r_mem, AHCI_P_CMD, work); 1373 } 1374 1375 static void 1376 ahci_ch_intr_main(struct ahci_channel *ch, uint32_t istatus) 1377 { 1378 uint32_t cstatus, serr = 0, sntf = 0, ok, err; 1379 enum ahci_err_type et; 1380 int i, ccs, port, reset = 0; 1381 1382 /* Clear interrupt statuses. */ 1383 ATA_OUTL(ch->r_mem, AHCI_P_IS, istatus); 1384 /* Read command statuses. */ 1385 if (ch->numtslots != 0) 1386 cstatus = ATA_INL(ch->r_mem, AHCI_P_SACT); 1387 else 1388 cstatus = 0; 1389 if (ch->numrslots != ch->numtslots) 1390 cstatus |= ATA_INL(ch->r_mem, AHCI_P_CI); 1391 /* Read SNTF in one of possible ways. */ 1392 if ((istatus & AHCI_P_IX_SDB) && 1393 (ch->pm_present || ch->curr[0].atapi != 0)) { 1394 if (ch->caps & AHCI_CAP_SSNTF) 1395 sntf = ATA_INL(ch->r_mem, AHCI_P_SNTF); 1396 else if (ch->fbs_enabled) { 1397 u_int8_t *fis = ch->dma.rfis + 0x58; 1398 1399 for (i = 0; i < 16; i++) { 1400 if (fis[1] & 0x80) { 1401 fis[1] &= 0x7f; 1402 sntf |= 1 << i; 1403 } 1404 fis += 256; 1405 } 1406 } else { 1407 u_int8_t *fis = ch->dma.rfis + 0x58; 1408 1409 if (fis[1] & 0x80) 1410 sntf = (1 << (fis[1] & 0x0f)); 1411 } 1412 } 1413 /* Process PHY events */ 1414 if (istatus & (AHCI_P_IX_PC | AHCI_P_IX_PRC | AHCI_P_IX_OF | 1415 AHCI_P_IX_IF | AHCI_P_IX_HBD | AHCI_P_IX_HBF | AHCI_P_IX_TFE)) { 1416 serr = ATA_INL(ch->r_mem, AHCI_P_SERR); 1417 if (serr) { 1418 ATA_OUTL(ch->r_mem, AHCI_P_SERR, serr); 1419 reset = ahci_phy_check_events(ch, serr); 1420 } 1421 } 1422 /* Process cold presence detection events */ 1423 if ((istatus & AHCI_P_IX_CPD) && !reset) 1424 ahci_cpd_check_events(ch); 1425 /* Process command errors */ 1426 if (istatus & (AHCI_P_IX_OF | AHCI_P_IX_IF | 1427 AHCI_P_IX_HBD | AHCI_P_IX_HBF | AHCI_P_IX_TFE)) { 1428 if (ch->quirks & AHCI_Q_NOCCS) { 1429 /* 1430 * ASMedia chips sometimes report failed commands as 1431 * completed. Count all running commands as failed. 1432 */ 1433 cstatus |= ch->rslots; 1434 1435 /* They also report wrong CCS, so try to guess one. */ 1436 ccs = powerof2(cstatus) ? ffs(cstatus) - 1 : -1; 1437 } else { 1438 ccs = (ATA_INL(ch->r_mem, AHCI_P_CMD) & 1439 AHCI_P_CMD_CCS_MASK) >> AHCI_P_CMD_CCS_SHIFT; 1440 } 1441 //device_printf(dev, "%s ERROR is %08x cs %08x ss %08x rs %08x tfd %02x serr %08x fbs %08x ccs %d\n", 1442 // __func__, istatus, cstatus, sstatus, ch->rslots, ATA_INL(ch->r_mem, AHCI_P_TFD), 1443 // serr, ATA_INL(ch->r_mem, AHCI_P_FBS), ccs); 1444 port = -1; 1445 if (ch->fbs_enabled) { 1446 uint32_t fbs = ATA_INL(ch->r_mem, AHCI_P_FBS); 1447 if (fbs & AHCI_P_FBS_SDE) { 1448 port = (fbs & AHCI_P_FBS_DWE) 1449 >> AHCI_P_FBS_DWE_SHIFT; 1450 } else { 1451 for (i = 0; i < 16; i++) { 1452 if (ch->numrslotspd[i] == 0) 1453 continue; 1454 if (port == -1) 1455 port = i; 1456 else if (port != i) { 1457 port = -2; 1458 break; 1459 } 1460 } 1461 } 1462 } 1463 err = ch->rslots & cstatus; 1464 } else { 1465 ccs = 0; 1466 err = 0; 1467 port = -1; 1468 } 1469 /* Complete all successful commands. */ 1470 ok = ch->rslots & ~cstatus; 1471 for (i = 0; i < ch->numslots; i++) { 1472 if ((ok >> i) & 1) 1473 ahci_end_transaction(&ch->slot[i], AHCI_ERR_NONE); 1474 } 1475 /* On error, complete the rest of commands with error statuses. */ 1476 if (err) { 1477 if (ch->frozen) { 1478 union ccb *fccb = ch->frozen; 1479 ch->frozen = NULL; 1480 fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; 1481 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) { 1482 xpt_freeze_devq(fccb->ccb_h.path, 1); 1483 fccb->ccb_h.status |= CAM_DEV_QFRZN; 1484 } 1485 ahci_done(ch, fccb); 1486 } 1487 for (i = 0; i < ch->numslots; i++) { 1488 /* XXX: reqests in loading state. */ 1489 if (((err >> i) & 1) == 0) 1490 continue; 1491 if (port >= 0 && 1492 ch->slot[i].ccb->ccb_h.target_id != port) 1493 continue; 1494 if (istatus & AHCI_P_IX_TFE) { 1495 if (port != -2) { 1496 /* Task File Error */ 1497 if (ch->numtslotspd[ 1498 ch->slot[i].ccb->ccb_h.target_id] == 0) { 1499 /* Untagged operation. */ 1500 if (i == ccs) 1501 et = AHCI_ERR_TFE; 1502 else 1503 et = AHCI_ERR_INNOCENT; 1504 } else { 1505 /* Tagged operation. */ 1506 et = AHCI_ERR_NCQ; 1507 } 1508 } else { 1509 et = AHCI_ERR_TFE; 1510 ch->fatalerr = 1; 1511 } 1512 } else if (istatus & AHCI_P_IX_IF) { 1513 if (ch->numtslots == 0 && i != ccs && port != -2) 1514 et = AHCI_ERR_INNOCENT; 1515 else 1516 et = AHCI_ERR_SATA; 1517 } else 1518 et = AHCI_ERR_INVALID; 1519 ahci_end_transaction(&ch->slot[i], et); 1520 } 1521 /* 1522 * We can't reinit port if there are some other 1523 * commands active, use resume to complete them. 1524 */ 1525 if (ch->rslots != 0 && !ch->recoverycmd) 1526 ATA_OUTL(ch->r_mem, AHCI_P_FBS, AHCI_P_FBS_EN | AHCI_P_FBS_DEC); 1527 } 1528 /* Process NOTIFY events */ 1529 if (sntf) 1530 ahci_notify_events(ch, sntf); 1531 } 1532 1533 /* Must be called with channel locked. */ 1534 static int 1535 ahci_check_collision(struct ahci_channel *ch, union ccb *ccb) 1536 { 1537 int t = ccb->ccb_h.target_id; 1538 1539 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1540 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 1541 /* Tagged command while we have no supported tag free. */ 1542 if (((~ch->oslots) & (0xffffffff >> (32 - 1543 ch->curr[t].tags))) == 0) 1544 return (1); 1545 /* If we have FBS */ 1546 if (ch->fbs_enabled) { 1547 /* Tagged command while untagged are active. */ 1548 if (ch->numrslotspd[t] != 0 && ch->numtslotspd[t] == 0) 1549 return (1); 1550 } else { 1551 /* Tagged command while untagged are active. */ 1552 if (ch->numrslots != 0 && ch->numtslots == 0) 1553 return (1); 1554 /* Tagged command while tagged to other target is active. */ 1555 if (ch->numtslots != 0 && 1556 ch->taggedtarget != ccb->ccb_h.target_id) 1557 return (1); 1558 } 1559 } else { 1560 /* If we have FBS */ 1561 if (ch->fbs_enabled) { 1562 /* Untagged command while tagged are active. */ 1563 if (ch->numrslotspd[t] != 0 && ch->numtslotspd[t] != 0) 1564 return (1); 1565 } else { 1566 /* Untagged command while tagged are active. */ 1567 if (ch->numrslots != 0 && ch->numtslots != 0) 1568 return (1); 1569 } 1570 } 1571 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1572 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) { 1573 /* Atomic command while anything active. */ 1574 if (ch->numrslots != 0) 1575 return (1); 1576 } 1577 /* We have some atomic command running. */ 1578 if (ch->aslots != 0) 1579 return (1); 1580 return (0); 1581 } 1582 1583 /* Must be called with channel locked. */ 1584 static void 1585 ahci_begin_transaction(struct ahci_channel *ch, union ccb *ccb) 1586 { 1587 struct ahci_slot *slot; 1588 int tag, tags; 1589 1590 /* Choose empty slot. */ 1591 tags = ch->numslots; 1592 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1593 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) 1594 tags = ch->curr[ccb->ccb_h.target_id].tags; 1595 if (ch->lastslot + 1 < tags) 1596 tag = ffs(~(ch->oslots >> (ch->lastslot + 1))); 1597 else 1598 tag = 0; 1599 if (tag == 0 || tag + ch->lastslot >= tags) 1600 tag = ffs(~ch->oslots) - 1; 1601 else 1602 tag += ch->lastslot; 1603 ch->lastslot = tag; 1604 /* Occupy chosen slot. */ 1605 slot = &ch->slot[tag]; 1606 slot->ccb = ccb; 1607 /* Stop PM timer. */ 1608 if (ch->numrslots == 0 && ch->pm_level > 3) 1609 callout_stop(&ch->pm_timer); 1610 /* Update channel stats. */ 1611 ch->oslots |= (1 << tag); 1612 ch->numrslots++; 1613 ch->numrslotspd[ccb->ccb_h.target_id]++; 1614 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1615 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 1616 ch->numtslots++; 1617 ch->numtslotspd[ccb->ccb_h.target_id]++; 1618 ch->taggedtarget = ccb->ccb_h.target_id; 1619 } 1620 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1621 (ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) 1622 ch->aslots |= (1 << tag); 1623 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1624 slot->state = AHCI_SLOT_LOADING; 1625 bus_dmamap_load_ccb(ch->dma.data_tag, slot->dma.data_map, ccb, 1626 ahci_dmasetprd, slot, 0); 1627 } else { 1628 slot->dma.nsegs = 0; 1629 ahci_execute_transaction(slot); 1630 } 1631 } 1632 1633 /* Locked by busdma engine. */ 1634 static void 1635 ahci_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 1636 { 1637 struct ahci_slot *slot = arg; 1638 struct ahci_channel *ch = slot->ch; 1639 struct ahci_cmd_tab *ctp; 1640 struct ahci_dma_prd *prd; 1641 int i; 1642 1643 if (error) { 1644 device_printf(ch->dev, "DMA load error\n"); 1645 ahci_end_transaction(slot, AHCI_ERR_INVALID); 1646 return; 1647 } 1648 KASSERT(nsegs <= AHCI_SG_ENTRIES, ("too many DMA segment entries\n")); 1649 /* Get a piece of the workspace for this request */ 1650 ctp = (struct ahci_cmd_tab *)(ch->dma.work + slot->ct_offset); 1651 /* Fill S/G table */ 1652 prd = &ctp->prd_tab[0]; 1653 for (i = 0; i < nsegs; i++) { 1654 prd[i].dba = htole64(segs[i].ds_addr); 1655 prd[i].dbc = htole32((segs[i].ds_len - 1) & AHCI_PRD_MASK); 1656 } 1657 slot->dma.nsegs = nsegs; 1658 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, 1659 ((slot->ccb->ccb_h.flags & CAM_DIR_IN) ? 1660 BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE)); 1661 ahci_execute_transaction(slot); 1662 } 1663 1664 /* Must be called with channel locked. */ 1665 static void 1666 ahci_execute_transaction(struct ahci_slot *slot) 1667 { 1668 struct ahci_channel *ch = slot->ch; 1669 struct ahci_cmd_tab *ctp; 1670 struct ahci_cmd_list *clp; 1671 union ccb *ccb = slot->ccb; 1672 int port = ccb->ccb_h.target_id & 0x0f; 1673 int fis_size, i, softreset; 1674 uint8_t *fis = ch->dma.rfis + 0x40; 1675 uint8_t val; 1676 uint16_t cmd_flags; 1677 1678 /* Get a piece of the workspace for this request */ 1679 ctp = (struct ahci_cmd_tab *)(ch->dma.work + slot->ct_offset); 1680 /* Setup the FIS for this request */ 1681 if (!(fis_size = ahci_setup_fis(ch, ctp, ccb, slot->slot))) { 1682 device_printf(ch->dev, "Setting up SATA FIS failed\n"); 1683 ahci_end_transaction(slot, AHCI_ERR_INVALID); 1684 return; 1685 } 1686 /* Setup the command list entry */ 1687 clp = (struct ahci_cmd_list *) 1688 (ch->dma.work + AHCI_CL_OFFSET + (AHCI_CL_SIZE * slot->slot)); 1689 cmd_flags = 1690 (ccb->ccb_h.flags & CAM_DIR_OUT ? AHCI_CMD_WRITE : 0) | 1691 (ccb->ccb_h.func_code == XPT_SCSI_IO ? 1692 (AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH) : 0) | 1693 (fis_size / sizeof(u_int32_t)) | 1694 (port << 12); 1695 clp->prd_length = htole16(slot->dma.nsegs); 1696 /* Special handling for Soft Reset command. */ 1697 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1698 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL)) { 1699 if (ccb->ataio.cmd.control & ATA_A_RESET) { 1700 softreset = 1; 1701 /* Kick controller into sane state */ 1702 ahci_stop(ch); 1703 ahci_clo(ch); 1704 ahci_start(ch, 0); 1705 cmd_flags |= AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY; 1706 } else { 1707 softreset = 2; 1708 /* Prepare FIS receive area for check. */ 1709 for (i = 0; i < 20; i++) 1710 fis[i] = 0xff; 1711 } 1712 } else 1713 softreset = 0; 1714 clp->bytecount = 0; 1715 clp->cmd_flags = htole16(cmd_flags); 1716 clp->cmd_table_phys = htole64(ch->dma.work_bus + slot->ct_offset); 1717 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map, 1718 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 1719 bus_dmamap_sync(ch->dma.rfis_tag, ch->dma.rfis_map, 1720 BUS_DMASYNC_PREREAD); 1721 /* Set ACTIVE bit for NCQ commands. */ 1722 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 1723 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 1724 ATA_OUTL(ch->r_mem, AHCI_P_SACT, 1 << slot->slot); 1725 } 1726 /* If FBS is enabled, set PMP port. */ 1727 if (ch->fbs_enabled) { 1728 ATA_OUTL(ch->r_mem, AHCI_P_FBS, AHCI_P_FBS_EN | 1729 (port << AHCI_P_FBS_DEV_SHIFT)); 1730 } 1731 /* Issue command to the controller. */ 1732 slot->state = AHCI_SLOT_RUNNING; 1733 ch->rslots |= (1 << slot->slot); 1734 ATA_OUTL(ch->r_mem, AHCI_P_CI, (1 << slot->slot)); 1735 /* Device reset commands doesn't interrupt. Poll them. */ 1736 if (ccb->ccb_h.func_code == XPT_ATA_IO && 1737 (ccb->ataio.cmd.command == ATA_DEVICE_RESET || softreset)) { 1738 int count, timeout = ccb->ccb_h.timeout * 100; 1739 enum ahci_err_type et = AHCI_ERR_NONE; 1740 1741 for (count = 0; count < timeout; count++) { 1742 DELAY(10); 1743 if (!(ATA_INL(ch->r_mem, AHCI_P_CI) & (1 << slot->slot))) 1744 break; 1745 if ((ATA_INL(ch->r_mem, AHCI_P_TFD) & ATA_S_ERROR) && 1746 softreset != 1) { 1747 #if 0 1748 device_printf(ch->dev, 1749 "Poll error on slot %d, TFD: %04x\n", 1750 slot->slot, ATA_INL(ch->r_mem, AHCI_P_TFD)); 1751 #endif 1752 et = AHCI_ERR_TFE; 1753 break; 1754 } 1755 /* Workaround for ATI SB600/SB700 chipsets. */ 1756 if (ccb->ccb_h.target_id == 15 && 1757 (ch->quirks & AHCI_Q_ATI_PMP_BUG) && 1758 (ATA_INL(ch->r_mem, AHCI_P_IS) & AHCI_P_IX_IPM)) { 1759 et = AHCI_ERR_TIMEOUT; 1760 break; 1761 } 1762 } 1763 1764 /* 1765 * Some Marvell controllers require additional time 1766 * after soft reset to work properly. Setup delay 1767 * to 50ms after soft reset. 1768 */ 1769 if (ch->quirks & AHCI_Q_MRVL_SR_DEL) 1770 DELAY(50000); 1771 1772 /* 1773 * Marvell HBAs with non-RAID firmware do not wait for 1774 * readiness after soft reset, so we have to wait here. 1775 * Marvell RAIDs do not have this problem, but instead 1776 * sometimes forget to update FIS receive area, breaking 1777 * this wait. 1778 */ 1779 if ((ch->quirks & AHCI_Q_NOBSYRES) == 0 && 1780 (ch->quirks & AHCI_Q_ATI_PMP_BUG) == 0 && 1781 softreset == 2 && et == AHCI_ERR_NONE) { 1782 for ( ; count < timeout; count++) { 1783 bus_dmamap_sync(ch->dma.rfis_tag, 1784 ch->dma.rfis_map, BUS_DMASYNC_POSTREAD); 1785 val = fis[2]; 1786 bus_dmamap_sync(ch->dma.rfis_tag, 1787 ch->dma.rfis_map, BUS_DMASYNC_PREREAD); 1788 if ((val & ATA_S_BUSY) == 0) 1789 break; 1790 DELAY(10); 1791 } 1792 } 1793 1794 if (timeout && (count >= timeout)) { 1795 device_printf(ch->dev, "Poll timeout on slot %d port %d\n", 1796 slot->slot, port); 1797 device_printf(ch->dev, "is %08x cs %08x ss %08x " 1798 "rs %08x tfd %02x serr %08x cmd %08x\n", 1799 ATA_INL(ch->r_mem, AHCI_P_IS), 1800 ATA_INL(ch->r_mem, AHCI_P_CI), 1801 ATA_INL(ch->r_mem, AHCI_P_SACT), ch->rslots, 1802 ATA_INL(ch->r_mem, AHCI_P_TFD), 1803 ATA_INL(ch->r_mem, AHCI_P_SERR), 1804 ATA_INL(ch->r_mem, AHCI_P_CMD)); 1805 et = AHCI_ERR_TIMEOUT; 1806 } 1807 1808 /* Kick controller into sane state and enable FBS. */ 1809 if (softreset == 2) 1810 ch->eslots |= (1 << slot->slot); 1811 ahci_end_transaction(slot, et); 1812 return; 1813 } 1814 /* Start command execution timeout */ 1815 callout_reset_sbt(&slot->timeout, SBT_1MS * ccb->ccb_h.timeout / 2, 1816 0, ahci_timeout, slot, 0); 1817 return; 1818 } 1819 1820 /* Must be called with channel locked. */ 1821 static void 1822 ahci_process_timeout(struct ahci_channel *ch) 1823 { 1824 int i; 1825 1826 mtx_assert(&ch->mtx, MA_OWNED); 1827 /* Handle the rest of commands. */ 1828 for (i = 0; i < ch->numslots; i++) { 1829 /* Do we have a running request on slot? */ 1830 if (ch->slot[i].state < AHCI_SLOT_RUNNING) 1831 continue; 1832 ahci_end_transaction(&ch->slot[i], AHCI_ERR_TIMEOUT); 1833 } 1834 } 1835 1836 /* Must be called with channel locked. */ 1837 static void 1838 ahci_rearm_timeout(struct ahci_channel *ch) 1839 { 1840 int i; 1841 1842 mtx_assert(&ch->mtx, MA_OWNED); 1843 for (i = 0; i < ch->numslots; i++) { 1844 struct ahci_slot *slot = &ch->slot[i]; 1845 1846 /* Do we have a running request on slot? */ 1847 if (slot->state < AHCI_SLOT_RUNNING) 1848 continue; 1849 if ((ch->toslots & (1 << i)) == 0) 1850 continue; 1851 callout_reset_sbt(&slot->timeout, 1852 SBT_1MS * slot->ccb->ccb_h.timeout / 2, 0, 1853 ahci_timeout, slot, 0); 1854 } 1855 } 1856 1857 /* Locked by callout mechanism. */ 1858 static void 1859 ahci_timeout(void *arg) 1860 { 1861 struct ahci_slot *slot = arg; 1862 struct ahci_channel *ch = slot->ch; 1863 device_t dev = ch->dev; 1864 uint32_t sstatus; 1865 int ccs; 1866 int i; 1867 1868 /* Check for stale timeout. */ 1869 if (slot->state < AHCI_SLOT_RUNNING) 1870 return; 1871 1872 /* Check if slot was not being executed last time we checked. */ 1873 if (slot->state < AHCI_SLOT_EXECUTING) { 1874 /* Check if slot started executing. */ 1875 sstatus = ATA_INL(ch->r_mem, AHCI_P_SACT); 1876 ccs = (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CCS_MASK) 1877 >> AHCI_P_CMD_CCS_SHIFT; 1878 if ((sstatus & (1 << slot->slot)) != 0 || ccs == slot->slot || 1879 ch->fbs_enabled || ch->wrongccs) 1880 slot->state = AHCI_SLOT_EXECUTING; 1881 else if ((ch->rslots & (1 << ccs)) == 0) { 1882 ch->wrongccs = 1; 1883 slot->state = AHCI_SLOT_EXECUTING; 1884 } 1885 1886 callout_reset_sbt(&slot->timeout, 1887 SBT_1MS * slot->ccb->ccb_h.timeout / 2, 0, 1888 ahci_timeout, slot, 0); 1889 return; 1890 } 1891 1892 device_printf(dev, "Timeout on slot %d port %d\n", 1893 slot->slot, slot->ccb->ccb_h.target_id & 0x0f); 1894 device_printf(dev, "is %08x cs %08x ss %08x rs %08x tfd %02x " 1895 "serr %08x cmd %08x\n", 1896 ATA_INL(ch->r_mem, AHCI_P_IS), ATA_INL(ch->r_mem, AHCI_P_CI), 1897 ATA_INL(ch->r_mem, AHCI_P_SACT), ch->rslots, 1898 ATA_INL(ch->r_mem, AHCI_P_TFD), ATA_INL(ch->r_mem, AHCI_P_SERR), 1899 ATA_INL(ch->r_mem, AHCI_P_CMD)); 1900 1901 /* Handle frozen command. */ 1902 if (ch->frozen) { 1903 union ccb *fccb = ch->frozen; 1904 ch->frozen = NULL; 1905 fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; 1906 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) { 1907 xpt_freeze_devq(fccb->ccb_h.path, 1); 1908 fccb->ccb_h.status |= CAM_DEV_QFRZN; 1909 } 1910 ahci_done(ch, fccb); 1911 } 1912 if (!ch->fbs_enabled && !ch->wrongccs) { 1913 /* Without FBS we know real timeout source. */ 1914 ch->fatalerr = 1; 1915 /* Handle command with timeout. */ 1916 ahci_end_transaction(&ch->slot[slot->slot], AHCI_ERR_TIMEOUT); 1917 /* Handle the rest of commands. */ 1918 for (i = 0; i < ch->numslots; i++) { 1919 /* Do we have a running request on slot? */ 1920 if (ch->slot[i].state < AHCI_SLOT_RUNNING) 1921 continue; 1922 ahci_end_transaction(&ch->slot[i], AHCI_ERR_INNOCENT); 1923 } 1924 } else { 1925 /* With FBS we wait for other commands timeout and pray. */ 1926 if (ch->toslots == 0) 1927 xpt_freeze_simq(ch->sim, 1); 1928 ch->toslots |= (1 << slot->slot); 1929 if ((ch->rslots & ~ch->toslots) == 0) 1930 ahci_process_timeout(ch); 1931 else 1932 device_printf(dev, " ... waiting for slots %08x\n", 1933 ch->rslots & ~ch->toslots); 1934 } 1935 } 1936 1937 /* Must be called with channel locked. */ 1938 static void 1939 ahci_end_transaction(struct ahci_slot *slot, enum ahci_err_type et) 1940 { 1941 struct ahci_channel *ch = slot->ch; 1942 union ccb *ccb = slot->ccb; 1943 struct ahci_cmd_list *clp; 1944 int lastto; 1945 uint32_t sig; 1946 1947 bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map, 1948 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1949 clp = (struct ahci_cmd_list *) 1950 (ch->dma.work + AHCI_CL_OFFSET + (AHCI_CL_SIZE * slot->slot)); 1951 /* Read result registers to the result struct 1952 * May be incorrect if several commands finished same time, 1953 * so read only when sure or have to. 1954 */ 1955 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 1956 struct ata_res *res = &ccb->ataio.res; 1957 1958 if ((et == AHCI_ERR_TFE) || 1959 (ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)) { 1960 u_int8_t *fis = ch->dma.rfis + 0x40; 1961 1962 bus_dmamap_sync(ch->dma.rfis_tag, ch->dma.rfis_map, 1963 BUS_DMASYNC_POSTREAD); 1964 if (ch->fbs_enabled) { 1965 fis += ccb->ccb_h.target_id * 256; 1966 res->status = fis[2]; 1967 res->error = fis[3]; 1968 } else { 1969 uint16_t tfd = ATA_INL(ch->r_mem, AHCI_P_TFD); 1970 1971 res->status = tfd; 1972 res->error = tfd >> 8; 1973 } 1974 res->lba_low = fis[4]; 1975 res->lba_mid = fis[5]; 1976 res->lba_high = fis[6]; 1977 res->device = fis[7]; 1978 res->lba_low_exp = fis[8]; 1979 res->lba_mid_exp = fis[9]; 1980 res->lba_high_exp = fis[10]; 1981 res->sector_count = fis[12]; 1982 res->sector_count_exp = fis[13]; 1983 1984 /* 1985 * Some weird controllers do not return signature in 1986 * FIS receive area. Read it from PxSIG register. 1987 */ 1988 if ((ch->quirks & AHCI_Q_ALTSIG) && 1989 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) && 1990 (ccb->ataio.cmd.control & ATA_A_RESET) == 0) { 1991 sig = ATA_INL(ch->r_mem, AHCI_P_SIG); 1992 res->lba_high = sig >> 24; 1993 res->lba_mid = sig >> 16; 1994 res->lba_low = sig >> 8; 1995 res->sector_count = sig; 1996 } 1997 } else 1998 bzero(res, sizeof(*res)); 1999 if ((ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) == 0 && 2000 (ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE && 2001 (ch->quirks & AHCI_Q_NOCOUNT) == 0) { 2002 ccb->ataio.resid = 2003 ccb->ataio.dxfer_len - le32toh(clp->bytecount); 2004 } 2005 } else { 2006 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE && 2007 (ch->quirks & AHCI_Q_NOCOUNT) == 0) { 2008 ccb->csio.resid = 2009 ccb->csio.dxfer_len - le32toh(clp->bytecount); 2010 } 2011 } 2012 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 2013 bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map, 2014 (ccb->ccb_h.flags & CAM_DIR_IN) ? 2015 BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 2016 bus_dmamap_unload(ch->dma.data_tag, slot->dma.data_map); 2017 } 2018 if (et != AHCI_ERR_NONE) 2019 ch->eslots |= (1 << slot->slot); 2020 /* In case of error, freeze device for proper recovery. */ 2021 if ((et != AHCI_ERR_NONE) && (!ch->recoverycmd) && 2022 !(ccb->ccb_h.status & CAM_DEV_QFRZN)) { 2023 xpt_freeze_devq(ccb->ccb_h.path, 1); 2024 ccb->ccb_h.status |= CAM_DEV_QFRZN; 2025 } 2026 /* Set proper result status. */ 2027 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 2028 switch (et) { 2029 case AHCI_ERR_NONE: 2030 ccb->ccb_h.status |= CAM_REQ_CMP; 2031 if (ccb->ccb_h.func_code == XPT_SCSI_IO) 2032 ccb->csio.scsi_status = SCSI_STATUS_OK; 2033 break; 2034 case AHCI_ERR_INVALID: 2035 ch->fatalerr = 1; 2036 ccb->ccb_h.status |= CAM_REQ_INVALID; 2037 break; 2038 case AHCI_ERR_INNOCENT: 2039 ccb->ccb_h.status |= CAM_REQUEUE_REQ; 2040 break; 2041 case AHCI_ERR_TFE: 2042 case AHCI_ERR_NCQ: 2043 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 2044 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 2045 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2046 } else { 2047 ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR; 2048 } 2049 break; 2050 case AHCI_ERR_SATA: 2051 ch->fatalerr = 1; 2052 if (!ch->recoverycmd) { 2053 xpt_freeze_simq(ch->sim, 1); 2054 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 2055 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 2056 } 2057 ccb->ccb_h.status |= CAM_UNCOR_PARITY; 2058 break; 2059 case AHCI_ERR_TIMEOUT: 2060 if (!ch->recoverycmd) { 2061 xpt_freeze_simq(ch->sim, 1); 2062 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 2063 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 2064 } 2065 ccb->ccb_h.status |= CAM_CMD_TIMEOUT; 2066 break; 2067 default: 2068 ch->fatalerr = 1; 2069 ccb->ccb_h.status |= CAM_REQ_CMP_ERR; 2070 } 2071 /* Free slot. */ 2072 ch->oslots &= ~(1 << slot->slot); 2073 ch->rslots &= ~(1 << slot->slot); 2074 ch->aslots &= ~(1 << slot->slot); 2075 slot->state = AHCI_SLOT_EMPTY; 2076 slot->ccb = NULL; 2077 /* Update channel stats. */ 2078 ch->numrslots--; 2079 ch->numrslotspd[ccb->ccb_h.target_id]--; 2080 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 2081 (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) { 2082 ch->numtslots--; 2083 ch->numtslotspd[ccb->ccb_h.target_id]--; 2084 } 2085 /* Cancel timeout state if request completed normally. */ 2086 if (et != AHCI_ERR_TIMEOUT) { 2087 lastto = (ch->toslots == (1 << slot->slot)); 2088 ch->toslots &= ~(1 << slot->slot); 2089 if (lastto) 2090 xpt_release_simq(ch->sim, TRUE); 2091 } 2092 /* If it was first request of reset sequence and there is no error, 2093 * proceed to second request. */ 2094 if ((ccb->ccb_h.func_code == XPT_ATA_IO) && 2095 (ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) && 2096 (ccb->ataio.cmd.control & ATA_A_RESET) && 2097 et == AHCI_ERR_NONE) { 2098 ccb->ataio.cmd.control &= ~ATA_A_RESET; 2099 ahci_begin_transaction(ch, ccb); 2100 return; 2101 } 2102 /* If it was our READ LOG command - process it. */ 2103 if (ccb->ccb_h.recovery_type == RECOVERY_READ_LOG) { 2104 ahci_process_read_log(ch, ccb); 2105 /* If it was our REQUEST SENSE command - process it. */ 2106 } else if (ccb->ccb_h.recovery_type == RECOVERY_REQUEST_SENSE) { 2107 ahci_process_request_sense(ch, ccb); 2108 /* If it was NCQ or ATAPI command error, put result on hold. */ 2109 } else if (et == AHCI_ERR_NCQ || 2110 ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR && 2111 (ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0)) { 2112 ch->hold[slot->slot] = ccb; 2113 ch->numhslots++; 2114 } else 2115 ahci_done(ch, ccb); 2116 /* If we have no other active commands, ... */ 2117 if (ch->rslots == 0) { 2118 /* if there was fatal error - reset port. */ 2119 if (ch->toslots != 0 || ch->fatalerr) { 2120 ahci_reset(ch); 2121 } else { 2122 /* if we have slots in error, we can reinit port. */ 2123 if (ch->eslots != 0) { 2124 ahci_stop(ch); 2125 ahci_clo(ch); 2126 ahci_start(ch, 1); 2127 } 2128 /* if there commands on hold, we can do READ LOG. */ 2129 if (!ch->recoverycmd && ch->numhslots) 2130 ahci_issue_recovery(ch); 2131 } 2132 /* If all the rest of commands are in timeout - give them chance. */ 2133 } else if ((ch->rslots & ~ch->toslots) == 0 && 2134 et != AHCI_ERR_TIMEOUT) 2135 ahci_rearm_timeout(ch); 2136 /* Unfreeze frozen command. */ 2137 if (ch->frozen && !ahci_check_collision(ch, ch->frozen)) { 2138 union ccb *fccb = ch->frozen; 2139 ch->frozen = NULL; 2140 ahci_begin_transaction(ch, fccb); 2141 xpt_release_simq(ch->sim, TRUE); 2142 } 2143 /* Start PM timer. */ 2144 if (ch->numrslots == 0 && ch->pm_level > 3 && 2145 (ch->curr[ch->pm_present ? 15 : 0].caps & CTS_SATA_CAPS_D_PMREQ)) { 2146 callout_schedule(&ch->pm_timer, 2147 (ch->pm_level == 4) ? hz / 1000 : hz / 8); 2148 } 2149 } 2150 2151 static void 2152 ahci_issue_recovery(struct ahci_channel *ch) 2153 { 2154 union ccb *ccb; 2155 struct ccb_ataio *ataio; 2156 struct ccb_scsiio *csio; 2157 int i; 2158 2159 /* Find some held command. */ 2160 for (i = 0; i < ch->numslots; i++) { 2161 if (ch->hold[i]) 2162 break; 2163 } 2164 ccb = xpt_alloc_ccb_nowait(); 2165 if (ccb == NULL) { 2166 device_printf(ch->dev, "Unable to allocate recovery command\n"); 2167 completeall: 2168 /* We can't do anything -- complete held commands. */ 2169 for (i = 0; i < ch->numslots; i++) { 2170 if (ch->hold[i] == NULL) 2171 continue; 2172 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 2173 ch->hold[i]->ccb_h.status |= CAM_RESRC_UNAVAIL; 2174 ahci_done(ch, ch->hold[i]); 2175 ch->hold[i] = NULL; 2176 ch->numhslots--; 2177 } 2178 ahci_reset(ch); 2179 return; 2180 } 2181 xpt_setup_ccb(&ccb->ccb_h, ch->hold[i]->ccb_h.path, 2182 ch->hold[i]->ccb_h.pinfo.priority); 2183 if (ccb->ccb_h.func_code == XPT_ATA_IO) { 2184 /* READ LOG */ 2185 ccb->ccb_h.recovery_type = RECOVERY_READ_LOG; 2186 ccb->ccb_h.func_code = XPT_ATA_IO; 2187 ccb->ccb_h.flags = CAM_DIR_IN; 2188 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */ 2189 ataio = &ccb->ataio; 2190 ataio->data_ptr = malloc(512, M_AHCI, M_NOWAIT); 2191 if (ataio->data_ptr == NULL) { 2192 xpt_free_ccb(ccb); 2193 device_printf(ch->dev, 2194 "Unable to allocate memory for READ LOG command\n"); 2195 goto completeall; 2196 } 2197 ataio->dxfer_len = 512; 2198 bzero(&ataio->cmd, sizeof(ataio->cmd)); 2199 ataio->cmd.flags = CAM_ATAIO_48BIT; 2200 ataio->cmd.command = 0x2F; /* READ LOG EXT */ 2201 ataio->cmd.sector_count = 1; 2202 ataio->cmd.sector_count_exp = 0; 2203 ataio->cmd.lba_low = 0x10; 2204 ataio->cmd.lba_mid = 0; 2205 ataio->cmd.lba_mid_exp = 0; 2206 } else { 2207 /* REQUEST SENSE */ 2208 ccb->ccb_h.recovery_type = RECOVERY_REQUEST_SENSE; 2209 ccb->ccb_h.recovery_slot = i; 2210 ccb->ccb_h.func_code = XPT_SCSI_IO; 2211 ccb->ccb_h.flags = CAM_DIR_IN; 2212 ccb->ccb_h.status = 0; 2213 ccb->ccb_h.timeout = 1000; /* 1s should be enough. */ 2214 csio = &ccb->csio; 2215 csio->data_ptr = (void *)&ch->hold[i]->csio.sense_data; 2216 csio->dxfer_len = ch->hold[i]->csio.sense_len; 2217 csio->cdb_len = 6; 2218 bzero(&csio->cdb_io, sizeof(csio->cdb_io)); 2219 csio->cdb_io.cdb_bytes[0] = 0x03; 2220 csio->cdb_io.cdb_bytes[4] = csio->dxfer_len; 2221 } 2222 /* Freeze SIM while doing recovery. */ 2223 ch->recoverycmd = 1; 2224 xpt_freeze_simq(ch->sim, 1); 2225 ahci_begin_transaction(ch, ccb); 2226 } 2227 2228 static void 2229 ahci_process_read_log(struct ahci_channel *ch, union ccb *ccb) 2230 { 2231 uint8_t *data; 2232 struct ata_res *res; 2233 int i; 2234 2235 ch->recoverycmd = 0; 2236 2237 data = ccb->ataio.data_ptr; 2238 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP && 2239 (data[0] & 0x80) == 0) { 2240 for (i = 0; i < ch->numslots; i++) { 2241 if (!ch->hold[i]) 2242 continue; 2243 if (ch->hold[i]->ccb_h.func_code != XPT_ATA_IO) 2244 continue; 2245 if ((data[0] & 0x1F) == i) { 2246 res = &ch->hold[i]->ataio.res; 2247 res->status = data[2]; 2248 res->error = data[3]; 2249 res->lba_low = data[4]; 2250 res->lba_mid = data[5]; 2251 res->lba_high = data[6]; 2252 res->device = data[7]; 2253 res->lba_low_exp = data[8]; 2254 res->lba_mid_exp = data[9]; 2255 res->lba_high_exp = data[10]; 2256 res->sector_count = data[12]; 2257 res->sector_count_exp = data[13]; 2258 } else { 2259 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 2260 ch->hold[i]->ccb_h.status |= CAM_REQUEUE_REQ; 2261 } 2262 ahci_done(ch, ch->hold[i]); 2263 ch->hold[i] = NULL; 2264 ch->numhslots--; 2265 } 2266 } else { 2267 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) 2268 device_printf(ch->dev, "Error while READ LOG EXT\n"); 2269 else if ((data[0] & 0x80) == 0) { 2270 device_printf(ch->dev, "Non-queued command error in READ LOG EXT\n"); 2271 } 2272 for (i = 0; i < ch->numslots; i++) { 2273 if (!ch->hold[i]) 2274 continue; 2275 if (ch->hold[i]->ccb_h.func_code != XPT_ATA_IO) 2276 continue; 2277 ahci_done(ch, ch->hold[i]); 2278 ch->hold[i] = NULL; 2279 ch->numhslots--; 2280 } 2281 } 2282 free(ccb->ataio.data_ptr, M_AHCI); 2283 xpt_free_ccb(ccb); 2284 xpt_release_simq(ch->sim, TRUE); 2285 } 2286 2287 static void 2288 ahci_process_request_sense(struct ahci_channel *ch, union ccb *ccb) 2289 { 2290 int i; 2291 2292 ch->recoverycmd = 0; 2293 2294 i = ccb->ccb_h.recovery_slot; 2295 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { 2296 ch->hold[i]->ccb_h.status |= CAM_AUTOSNS_VALID; 2297 } else { 2298 ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK; 2299 ch->hold[i]->ccb_h.status |= CAM_AUTOSENSE_FAIL; 2300 } 2301 ahci_done(ch, ch->hold[i]); 2302 ch->hold[i] = NULL; 2303 ch->numhslots--; 2304 xpt_free_ccb(ccb); 2305 xpt_release_simq(ch->sim, TRUE); 2306 } 2307 2308 static void 2309 ahci_start(struct ahci_channel *ch, int fbs) 2310 { 2311 u_int32_t cmd; 2312 2313 /* Run the channel start callback, if any. */ 2314 if (ch->start) 2315 ch->start(ch); 2316 2317 /* Clear SATA error register */ 2318 ATA_OUTL(ch->r_mem, AHCI_P_SERR, 0xFFFFFFFF); 2319 /* Clear any interrupts pending on this channel */ 2320 ATA_OUTL(ch->r_mem, AHCI_P_IS, 0xFFFFFFFF); 2321 /* Configure FIS-based switching if supported. */ 2322 if (ch->chcaps & AHCI_P_CMD_FBSCP) { 2323 ch->fbs_enabled = (fbs && ch->pm_present) ? 1 : 0; 2324 ATA_OUTL(ch->r_mem, AHCI_P_FBS, 2325 ch->fbs_enabled ? AHCI_P_FBS_EN : 0); 2326 } 2327 /* Start operations on this channel */ 2328 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD); 2329 cmd &= ~AHCI_P_CMD_PMA; 2330 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd | AHCI_P_CMD_ST | 2331 (ch->pm_present ? AHCI_P_CMD_PMA : 0)); 2332 } 2333 2334 static void 2335 ahci_stop(struct ahci_channel *ch) 2336 { 2337 u_int32_t cmd; 2338 int timeout; 2339 2340 /* Kill all activity on this channel */ 2341 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD); 2342 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd & ~AHCI_P_CMD_ST); 2343 /* Wait for activity stop. */ 2344 timeout = 0; 2345 do { 2346 DELAY(10); 2347 if (timeout++ > 50000) { 2348 device_printf(ch->dev, "stopping AHCI engine failed\n"); 2349 break; 2350 } 2351 } while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CR); 2352 ch->eslots = 0; 2353 } 2354 2355 static void 2356 ahci_clo(struct ahci_channel *ch) 2357 { 2358 u_int32_t cmd; 2359 int timeout; 2360 2361 /* Issue Command List Override if supported */ 2362 if (ch->caps & AHCI_CAP_SCLO) { 2363 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD); 2364 cmd |= AHCI_P_CMD_CLO; 2365 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd); 2366 timeout = 0; 2367 do { 2368 DELAY(10); 2369 if (timeout++ > 50000) { 2370 device_printf(ch->dev, "executing CLO failed\n"); 2371 break; 2372 } 2373 } while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CLO); 2374 } 2375 } 2376 2377 static void 2378 ahci_stop_fr(struct ahci_channel *ch) 2379 { 2380 u_int32_t cmd; 2381 int timeout; 2382 2383 /* Kill all FIS reception on this channel */ 2384 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD); 2385 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd & ~AHCI_P_CMD_FRE); 2386 /* Wait for FIS reception stop. */ 2387 timeout = 0; 2388 do { 2389 DELAY(10); 2390 if (timeout++ > 50000) { 2391 device_printf(ch->dev, "stopping AHCI FR engine failed\n"); 2392 break; 2393 } 2394 } while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_FR); 2395 } 2396 2397 static void 2398 ahci_start_fr(struct ahci_channel *ch) 2399 { 2400 u_int32_t cmd; 2401 2402 /* Start FIS reception on this channel */ 2403 cmd = ATA_INL(ch->r_mem, AHCI_P_CMD); 2404 ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd | AHCI_P_CMD_FRE); 2405 } 2406 2407 static int 2408 ahci_wait_ready(struct ahci_channel *ch, int t, int t0) 2409 { 2410 int timeout = 0; 2411 uint32_t val; 2412 2413 while ((val = ATA_INL(ch->r_mem, AHCI_P_TFD)) & 2414 (ATA_S_BUSY | ATA_S_DRQ)) { 2415 if (timeout > t) { 2416 if (t != 0) { 2417 device_printf(ch->dev, 2418 "AHCI reset: device not ready after %dms " 2419 "(tfd = %08x)\n", 2420 MAX(t, 0) + t0, val); 2421 } 2422 return (EBUSY); 2423 } 2424 DELAY(1000); 2425 timeout++; 2426 } 2427 if (bootverbose) 2428 device_printf(ch->dev, "AHCI reset: device ready after %dms\n", 2429 timeout + t0); 2430 return (0); 2431 } 2432 2433 static void 2434 ahci_reset_to(void *arg) 2435 { 2436 struct ahci_channel *ch = arg; 2437 2438 if (ch->resetting == 0) 2439 return; 2440 ch->resetting--; 2441 if (ahci_wait_ready(ch, ch->resetting == 0 ? -1 : 0, 2442 (310 - ch->resetting) * 100) == 0) { 2443 ch->resetting = 0; 2444 ahci_start(ch, 1); 2445 xpt_release_simq(ch->sim, TRUE); 2446 return; 2447 } 2448 if (ch->resetting == 0) { 2449 ahci_clo(ch); 2450 ahci_start(ch, 1); 2451 xpt_release_simq(ch->sim, TRUE); 2452 return; 2453 } 2454 callout_schedule(&ch->reset_timer, hz / 10); 2455 } 2456 2457 static void 2458 ahci_reset(struct ahci_channel *ch) 2459 { 2460 struct ahci_controller *ctlr = device_get_softc(device_get_parent(ch->dev)); 2461 int i; 2462 2463 xpt_freeze_simq(ch->sim, 1); 2464 if (bootverbose) 2465 device_printf(ch->dev, "AHCI reset...\n"); 2466 /* Forget about previous reset. */ 2467 if (ch->resetting) { 2468 ch->resetting = 0; 2469 callout_stop(&ch->reset_timer); 2470 xpt_release_simq(ch->sim, TRUE); 2471 } 2472 /* Requeue freezed command. */ 2473 if (ch->frozen) { 2474 union ccb *fccb = ch->frozen; 2475 ch->frozen = NULL; 2476 fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ; 2477 if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) { 2478 xpt_freeze_devq(fccb->ccb_h.path, 1); 2479 fccb->ccb_h.status |= CAM_DEV_QFRZN; 2480 } 2481 ahci_done(ch, fccb); 2482 } 2483 /* Kill the engine and requeue all running commands. */ 2484 ahci_stop(ch); 2485 for (i = 0; i < ch->numslots; i++) { 2486 /* Do we have a running request on slot? */ 2487 if (ch->slot[i].state < AHCI_SLOT_RUNNING) 2488 continue; 2489 /* XXX; Commands in loading state. */ 2490 ahci_end_transaction(&ch->slot[i], AHCI_ERR_INNOCENT); 2491 } 2492 for (i = 0; i < ch->numslots; i++) { 2493 if (!ch->hold[i]) 2494 continue; 2495 ahci_done(ch, ch->hold[i]); 2496 ch->hold[i] = NULL; 2497 ch->numhslots--; 2498 } 2499 if (ch->toslots != 0) 2500 xpt_release_simq(ch->sim, TRUE); 2501 ch->eslots = 0; 2502 ch->toslots = 0; 2503 ch->wrongccs = 0; 2504 ch->fatalerr = 0; 2505 /* Tell the XPT about the event */ 2506 xpt_async(AC_BUS_RESET, ch->path, NULL); 2507 /* Disable port interrupts */ 2508 ATA_OUTL(ch->r_mem, AHCI_P_IE, 0); 2509 /* Reset and reconnect PHY, */ 2510 if (!ahci_sata_phy_reset(ch)) { 2511 if (bootverbose) 2512 device_printf(ch->dev, 2513 "AHCI reset: device not found\n"); 2514 ch->devices = 0; 2515 /* Enable wanted port interrupts */ 2516 ATA_OUTL(ch->r_mem, AHCI_P_IE, 2517 (((ch->pm_level != 0) ? AHCI_P_IX_CPD | AHCI_P_IX_MP : 0) | 2518 AHCI_P_IX_PRC | AHCI_P_IX_PC)); 2519 xpt_release_simq(ch->sim, TRUE); 2520 return; 2521 } 2522 if (bootverbose) 2523 device_printf(ch->dev, "AHCI reset: device found\n"); 2524 /* Wait for clearing busy status. */ 2525 if (ahci_wait_ready(ch, dumping ? 31000 : 0, 0)) { 2526 if (dumping) 2527 ahci_clo(ch); 2528 else 2529 ch->resetting = 310; 2530 } 2531 ch->devices = 1; 2532 /* Enable wanted port interrupts */ 2533 ATA_OUTL(ch->r_mem, AHCI_P_IE, 2534 (((ch->pm_level != 0) ? AHCI_P_IX_CPD | AHCI_P_IX_MP : 0) | 2535 AHCI_P_IX_TFE | AHCI_P_IX_HBF | 2536 AHCI_P_IX_HBD | AHCI_P_IX_IF | AHCI_P_IX_OF | 2537 ((ch->pm_level == 0) ? AHCI_P_IX_PRC : 0) | AHCI_P_IX_PC | 2538 AHCI_P_IX_DP | AHCI_P_IX_UF | (ctlr->ccc ? 0 : AHCI_P_IX_SDB) | 2539 AHCI_P_IX_DS | AHCI_P_IX_PS | (ctlr->ccc ? 0 : AHCI_P_IX_DHR))); 2540 if (ch->resetting) 2541 callout_reset(&ch->reset_timer, hz / 10, ahci_reset_to, ch); 2542 else { 2543 ahci_start(ch, 1); 2544 xpt_release_simq(ch->sim, TRUE); 2545 } 2546 } 2547 2548 static int 2549 ahci_setup_fis(struct ahci_channel *ch, struct ahci_cmd_tab *ctp, union ccb *ccb, int tag) 2550 { 2551 u_int8_t *fis = &ctp->cfis[0]; 2552 2553 bzero(fis, 20); 2554 fis[0] = 0x27; /* host to device */ 2555 fis[1] = (ccb->ccb_h.target_id & 0x0f); 2556 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 2557 fis[1] |= 0x80; 2558 fis[2] = ATA_PACKET_CMD; 2559 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE && 2560 ch->curr[ccb->ccb_h.target_id].mode >= ATA_DMA) 2561 fis[3] = ATA_F_DMA; 2562 else { 2563 fis[5] = ccb->csio.dxfer_len; 2564 fis[6] = ccb->csio.dxfer_len >> 8; 2565 } 2566 fis[7] = ATA_D_LBA; 2567 fis[15] = ATA_A_4BIT; 2568 bcopy((ccb->ccb_h.flags & CAM_CDB_POINTER) ? 2569 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes, 2570 ctp->acmd, ccb->csio.cdb_len); 2571 bzero(ctp->acmd + ccb->csio.cdb_len, 32 - ccb->csio.cdb_len); 2572 } else if ((ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) == 0) { 2573 fis[1] |= 0x80; 2574 fis[2] = ccb->ataio.cmd.command; 2575 fis[3] = ccb->ataio.cmd.features; 2576 fis[4] = ccb->ataio.cmd.lba_low; 2577 fis[5] = ccb->ataio.cmd.lba_mid; 2578 fis[6] = ccb->ataio.cmd.lba_high; 2579 fis[7] = ccb->ataio.cmd.device; 2580 fis[8] = ccb->ataio.cmd.lba_low_exp; 2581 fis[9] = ccb->ataio.cmd.lba_mid_exp; 2582 fis[10] = ccb->ataio.cmd.lba_high_exp; 2583 fis[11] = ccb->ataio.cmd.features_exp; 2584 fis[12] = ccb->ataio.cmd.sector_count; 2585 if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) { 2586 fis[12] &= 0x07; 2587 fis[12] |= tag << 3; 2588 } 2589 fis[13] = ccb->ataio.cmd.sector_count_exp; 2590 if (ccb->ataio.ata_flags & ATA_FLAG_ICC) 2591 fis[14] = ccb->ataio.icc; 2592 fis[15] = ATA_A_4BIT; 2593 if (ccb->ataio.ata_flags & ATA_FLAG_AUX) { 2594 fis[16] = ccb->ataio.aux & 0xff; 2595 fis[17] = (ccb->ataio.aux >> 8) & 0xff; 2596 fis[18] = (ccb->ataio.aux >> 16) & 0xff; 2597 fis[19] = (ccb->ataio.aux >> 24) & 0xff; 2598 } 2599 } else { 2600 fis[15] = ccb->ataio.cmd.control; 2601 } 2602 return (20); 2603 } 2604 2605 static int 2606 ahci_sata_connect(struct ahci_channel *ch) 2607 { 2608 u_int32_t status; 2609 int timeout, found = 0; 2610 2611 /* Wait up to 100ms for "connect well" */ 2612 for (timeout = 0; timeout < 1000 ; timeout++) { 2613 status = ATA_INL(ch->r_mem, AHCI_P_SSTS); 2614 if ((status & ATA_SS_DET_MASK) != ATA_SS_DET_NO_DEVICE) 2615 found = 1; 2616 if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) && 2617 ((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) && 2618 ((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE)) 2619 break; 2620 if ((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_OFFLINE) { 2621 if (bootverbose) { 2622 device_printf(ch->dev, "SATA offline status=%08x\n", 2623 status); 2624 } 2625 return (0); 2626 } 2627 if (found == 0 && timeout >= 100) 2628 break; 2629 DELAY(100); 2630 } 2631 if (timeout >= 1000 || !found) { 2632 if (bootverbose) { 2633 device_printf(ch->dev, 2634 "SATA connect timeout time=%dus status=%08x\n", 2635 timeout * 100, status); 2636 } 2637 return (0); 2638 } 2639 if (bootverbose) { 2640 device_printf(ch->dev, "SATA connect time=%dus status=%08x\n", 2641 timeout * 100, status); 2642 } 2643 /* Clear SATA error register */ 2644 ATA_OUTL(ch->r_mem, AHCI_P_SERR, 0xffffffff); 2645 return (1); 2646 } 2647 2648 static int 2649 ahci_sata_phy_reset(struct ahci_channel *ch) 2650 { 2651 int sata_rev; 2652 uint32_t val, detval; 2653 2654 if (ch->listening) { 2655 val = ATA_INL(ch->r_mem, AHCI_P_CMD); 2656 val |= AHCI_P_CMD_SUD; 2657 ATA_OUTL(ch->r_mem, AHCI_P_CMD, val); 2658 ch->listening = 0; 2659 } 2660 sata_rev = ch->user[ch->pm_present ? 15 : 0].revision; 2661 if (sata_rev == 1) 2662 val = ATA_SC_SPD_SPEED_GEN1; 2663 else if (sata_rev == 2) 2664 val = ATA_SC_SPD_SPEED_GEN2; 2665 else if (sata_rev == 3) 2666 val = ATA_SC_SPD_SPEED_GEN3; 2667 else 2668 val = 0; 2669 detval = ahci_ch_detval(ch, ATA_SC_DET_RESET); 2670 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, 2671 detval | val | 2672 ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER); 2673 DELAY(1000); 2674 detval = ahci_ch_detval(ch, ATA_SC_DET_IDLE); 2675 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, 2676 detval | val | ((ch->pm_level > 0) ? 0 : 2677 (ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER))); 2678 if (!ahci_sata_connect(ch)) { 2679 if (ch->caps & AHCI_CAP_SSS) { 2680 val = ATA_INL(ch->r_mem, AHCI_P_CMD); 2681 val &= ~AHCI_P_CMD_SUD; 2682 ATA_OUTL(ch->r_mem, AHCI_P_CMD, val); 2683 ch->listening = 1; 2684 } else if (ch->pm_level > 0) 2685 ATA_OUTL(ch->r_mem, AHCI_P_SCTL, ATA_SC_DET_DISABLE); 2686 return (0); 2687 } 2688 return (1); 2689 } 2690 2691 static int 2692 ahci_check_ids(struct ahci_channel *ch, union ccb *ccb) 2693 { 2694 2695 if (ccb->ccb_h.target_id > ((ch->caps & AHCI_CAP_SPM) ? 15 : 0)) { 2696 ccb->ccb_h.status = CAM_TID_INVALID; 2697 ahci_done(ch, ccb); 2698 return (-1); 2699 } 2700 if (ccb->ccb_h.target_lun != 0) { 2701 ccb->ccb_h.status = CAM_LUN_INVALID; 2702 ahci_done(ch, ccb); 2703 return (-1); 2704 } 2705 return (0); 2706 } 2707 2708 static void 2709 ahciaction(struct cam_sim *sim, union ccb *ccb) 2710 { 2711 struct ahci_channel *ch; 2712 2713 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("ahciaction func_code=%x\n", 2714 ccb->ccb_h.func_code)); 2715 2716 ch = (struct ahci_channel *)cam_sim_softc(sim); 2717 switch (ccb->ccb_h.func_code) { 2718 /* Common cases first */ 2719 case XPT_ATA_IO: /* Execute the requested I/O operation */ 2720 case XPT_SCSI_IO: 2721 if (ahci_check_ids(ch, ccb)) 2722 return; 2723 if (ch->devices == 0 || 2724 (ch->pm_present == 0 && 2725 ccb->ccb_h.target_id > 0 && ccb->ccb_h.target_id < 15)) { 2726 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 2727 break; 2728 } 2729 ccb->ccb_h.recovery_type = RECOVERY_NONE; 2730 /* Check for command collision. */ 2731 if (ahci_check_collision(ch, ccb)) { 2732 /* Freeze command. */ 2733 ch->frozen = ccb; 2734 /* We have only one frozen slot, so freeze simq also. */ 2735 xpt_freeze_simq(ch->sim, 1); 2736 return; 2737 } 2738 ahci_begin_transaction(ch, ccb); 2739 return; 2740 case XPT_ABORT: /* Abort the specified CCB */ 2741 /* XXX Implement */ 2742 ccb->ccb_h.status = CAM_REQ_INVALID; 2743 break; 2744 case XPT_SET_TRAN_SETTINGS: 2745 { 2746 struct ccb_trans_settings *cts = &ccb->cts; 2747 struct ahci_device *d; 2748 2749 if (ahci_check_ids(ch, ccb)) 2750 return; 2751 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) 2752 d = &ch->curr[ccb->ccb_h.target_id]; 2753 else 2754 d = &ch->user[ccb->ccb_h.target_id]; 2755 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_REVISION) 2756 d->revision = cts->xport_specific.sata.revision; 2757 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_MODE) 2758 d->mode = cts->xport_specific.sata.mode; 2759 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT) 2760 d->bytecount = min(8192, cts->xport_specific.sata.bytecount); 2761 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS) 2762 d->tags = min(ch->numslots, cts->xport_specific.sata.tags); 2763 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_PM) 2764 ch->pm_present = cts->xport_specific.sata.pm_present; 2765 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_ATAPI) 2766 d->atapi = cts->xport_specific.sata.atapi; 2767 if (cts->xport_specific.sata.valid & CTS_SATA_VALID_CAPS) 2768 d->caps = cts->xport_specific.sata.caps; 2769 ccb->ccb_h.status = CAM_REQ_CMP; 2770 break; 2771 } 2772 case XPT_GET_TRAN_SETTINGS: 2773 /* Get default/user set transfer settings for the target */ 2774 { 2775 struct ccb_trans_settings *cts = &ccb->cts; 2776 struct ahci_device *d; 2777 uint32_t status; 2778 2779 if (ahci_check_ids(ch, ccb)) 2780 return; 2781 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) 2782 d = &ch->curr[ccb->ccb_h.target_id]; 2783 else 2784 d = &ch->user[ccb->ccb_h.target_id]; 2785 cts->protocol = PROTO_UNSPECIFIED; 2786 cts->protocol_version = PROTO_VERSION_UNSPECIFIED; 2787 cts->transport = XPORT_SATA; 2788 cts->transport_version = XPORT_VERSION_UNSPECIFIED; 2789 cts->proto_specific.valid = 0; 2790 cts->xport_specific.sata.valid = 0; 2791 if (cts->type == CTS_TYPE_CURRENT_SETTINGS && 2792 (ccb->ccb_h.target_id == 15 || 2793 (ccb->ccb_h.target_id == 0 && !ch->pm_present))) { 2794 status = ATA_INL(ch->r_mem, AHCI_P_SSTS) & ATA_SS_SPD_MASK; 2795 if (status & 0x0f0) { 2796 cts->xport_specific.sata.revision = 2797 (status & 0x0f0) >> 4; 2798 cts->xport_specific.sata.valid |= 2799 CTS_SATA_VALID_REVISION; 2800 } 2801 cts->xport_specific.sata.caps = d->caps & CTS_SATA_CAPS_D; 2802 if (ch->pm_level) { 2803 if (ch->caps & (AHCI_CAP_PSC | AHCI_CAP_SSC)) 2804 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_PMREQ; 2805 if (ch->caps2 & AHCI_CAP2_APST) 2806 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_APST; 2807 } 2808 if ((ch->caps & AHCI_CAP_SNCQ) && 2809 (ch->quirks & AHCI_Q_NOAA) == 0) 2810 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_DMAAA; 2811 cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_AN; 2812 cts->xport_specific.sata.caps &= 2813 ch->user[ccb->ccb_h.target_id].caps; 2814 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS; 2815 } else { 2816 cts->xport_specific.sata.revision = d->revision; 2817 cts->xport_specific.sata.valid |= CTS_SATA_VALID_REVISION; 2818 cts->xport_specific.sata.caps = d->caps; 2819 cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS; 2820 } 2821 cts->xport_specific.sata.mode = d->mode; 2822 cts->xport_specific.sata.valid |= CTS_SATA_VALID_MODE; 2823 cts->xport_specific.sata.bytecount = d->bytecount; 2824 cts->xport_specific.sata.valid |= CTS_SATA_VALID_BYTECOUNT; 2825 cts->xport_specific.sata.pm_present = ch->pm_present; 2826 cts->xport_specific.sata.valid |= CTS_SATA_VALID_PM; 2827 cts->xport_specific.sata.tags = d->tags; 2828 cts->xport_specific.sata.valid |= CTS_SATA_VALID_TAGS; 2829 cts->xport_specific.sata.atapi = d->atapi; 2830 cts->xport_specific.sata.valid |= CTS_SATA_VALID_ATAPI; 2831 ccb->ccb_h.status = CAM_REQ_CMP; 2832 break; 2833 } 2834 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 2835 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 2836 ahci_reset(ch); 2837 ccb->ccb_h.status = CAM_REQ_CMP; 2838 break; 2839 case XPT_TERM_IO: /* Terminate the I/O process */ 2840 /* XXX Implement */ 2841 ccb->ccb_h.status = CAM_REQ_INVALID; 2842 break; 2843 case XPT_PATH_INQ: /* Path routing inquiry */ 2844 { 2845 struct ccb_pathinq *cpi = &ccb->cpi; 2846 2847 cpi->version_num = 1; /* XXX??? */ 2848 cpi->hba_inquiry = PI_SDTR_ABLE; 2849 if (ch->caps & AHCI_CAP_SNCQ) 2850 cpi->hba_inquiry |= PI_TAG_ABLE; 2851 if (ch->caps & AHCI_CAP_SPM) 2852 cpi->hba_inquiry |= PI_SATAPM; 2853 cpi->target_sprt = 0; 2854 cpi->hba_misc = PIM_SEQSCAN | PIM_UNMAPPED; 2855 if ((ch->quirks & AHCI_Q_NOAUX) == 0) 2856 cpi->hba_misc |= PIM_ATA_EXT; 2857 cpi->hba_eng_cnt = 0; 2858 if (ch->caps & AHCI_CAP_SPM) 2859 cpi->max_target = 15; 2860 else 2861 cpi->max_target = 0; 2862 cpi->max_lun = 0; 2863 cpi->initiator_id = 0; 2864 cpi->bus_id = cam_sim_bus(sim); 2865 cpi->base_transfer_speed = 150000; 2866 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 2867 strlcpy(cpi->hba_vid, "AHCI", HBA_IDLEN); 2868 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 2869 cpi->unit_number = cam_sim_unit(sim); 2870 cpi->transport = XPORT_SATA; 2871 cpi->transport_version = XPORT_VERSION_UNSPECIFIED; 2872 cpi->protocol = PROTO_ATA; 2873 cpi->protocol_version = PROTO_VERSION_UNSPECIFIED; 2874 cpi->maxio = ctob(AHCI_SG_ENTRIES - 1); 2875 /* ATI SB600 can't handle 256 sectors with FPDMA (NCQ). */ 2876 if (ch->quirks & AHCI_Q_MAXIO_64K) 2877 cpi->maxio = min(cpi->maxio, 128 * 512); 2878 cpi->hba_vendor = ch->vendorid; 2879 cpi->hba_device = ch->deviceid; 2880 cpi->hba_subvendor = ch->subvendorid; 2881 cpi->hba_subdevice = ch->subdeviceid; 2882 cpi->ccb_h.status = CAM_REQ_CMP; 2883 break; 2884 } 2885 default: 2886 ccb->ccb_h.status = CAM_REQ_INVALID; 2887 break; 2888 } 2889 ahci_done(ch, ccb); 2890 } 2891 2892 static void 2893 ahcipoll(struct cam_sim *sim) 2894 { 2895 struct ahci_channel *ch = (struct ahci_channel *)cam_sim_softc(sim); 2896 uint32_t istatus; 2897 2898 /* Read interrupt statuses and process if any. */ 2899 istatus = ATA_INL(ch->r_mem, AHCI_P_IS); 2900 if (istatus != 0) 2901 ahci_ch_intr_main(ch, istatus); 2902 if (ch->resetting != 0 && 2903 (--ch->resetpolldiv <= 0 || !callout_pending(&ch->reset_timer))) { 2904 ch->resetpolldiv = 1000; 2905 ahci_reset_to(ch); 2906 } 2907 } 2908 2909 devclass_t ahci_devclass; 2910 2911 MODULE_VERSION(ahci, 1); 2912 MODULE_DEPEND(ahci, cam, 1, 1, 1); 2913