1 /*- 2 * Copyright (c) 2008 Stanislav Sedov <stas@FreeBSD.org>. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 17 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 24 * 25 * $FreeBSD$ 26 */ 27 28 /* 29 * Master configuration register 30 */ 31 #define AE_MASTER_REG 0x1400 32 33 #define AE_MASTER_SOFT_RESET 0x1 /* Reset adapter. */ 34 #define AE_MASTER_MTIMER_EN 0x2 /* Unknown. */ 35 #define AE_MASTER_IMT_EN 0x4 /* Interrupt moderation timer enable. */ 36 #define AE_MASTER_MANUAL_INT 0x8 /* Software manual interrupt. */ 37 #define AE_MASTER_REVNUM_SHIFT 16 /* Chip revision number. */ 38 #define AE_MASTER_REVNUM_MASK 0xff 39 #define AE_MASTER_DEVID_SHIFT 24 /* PCI device id. */ 40 #define AE_MASTER_DEVID_MASK 0xff 41 42 /* 43 * Interrupt status register 44 */ 45 #define AE_ISR_REG 0x1600 46 #define AE_ISR_TIMER 0x00000001 /* Counter expired. */ 47 #define AE_ISR_MANUAL 0x00000002 /* Manual interrupt occuried. */ 48 #define AE_ISR_RXF_OVERFLOW 0x00000004 /* RxF overflow occuried. */ 49 #define AE_ISR_TXF_UNDERRUN 0x00000008 /* TxF underrun occuried. */ 50 #define AE_ISR_TXS_OVERFLOW 0x00000010 /* TxS overflow occuried. */ 51 #define AE_ISR_RXS_OVERFLOW 0x00000020 /* Internal RxS ring overflow. */ 52 #define AE_ISR_LINK_CHG 0x00000040 /* Link state changed. */ 53 #define AE_ISR_TXD_UNDERRUN 0x00000080 /* TxD underrun occuried. */ 54 #define AE_ISR_RXD_OVERFLOW 0x00000100 /* RxD overflow occuried. */ 55 #define AE_ISR_DMAR_TIMEOUT 0x00000200 /* DMA read timeout. */ 56 #define AE_ISR_DMAW_TIMEOUT 0x00000400 /* DMA write timeout. */ 57 #define AE_ISR_PHY 0x00000800 /* PHY interrupt. */ 58 #define AE_ISR_TXS_UPDATED 0x00010000 /* Tx status updated. */ 59 #define AE_ISR_RXD_UPDATED 0x00020000 /* Rx status updated. */ 60 #define AE_ISR_TX_EARLY 0x00040000 /* TxMAC started transmit. */ 61 #define AE_ISR_FIFO_UNDERRUN 0x01000000 /* FIFO underrun. */ 62 #define AE_ISR_FRAME_ERROR 0x02000000 /* Frame receive error. */ 63 #define AE_ISR_FRAME_SUCCESS 0x04000000 /* Frame receive success. */ 64 #define AE_ISR_CRC_ERROR 0x08000000 /* CRC error occuried. */ 65 #define AE_ISR_PHY_LINKDOWN 0x10000000 /* PHY link down. */ 66 #define AE_ISR_DISABLE 0x80000000 /* Disable interrupts. */ 67 68 #define AE_ISR_TX_EVENT (AE_ISR_TXF_UNDERRUN | AE_ISR_TXS_OVERFLOW | \ 69 AE_ISR_TXD_UNDERRUN | AE_ISR_TXS_UPDATED | \ 70 AE_ISR_TX_EARLY) 71 #define AE_ISR_RX_EVENT (AE_ISR_RXF_OVERFLOW | AE_ISR_RXS_OVERFLOW | \ 72 AE_ISR_RXD_OVERFLOW | AE_ISR_RXD_UPDATED) 73 74 /* Interrupt mask register. */ 75 #define AE_IMR_REG 0x1604 76 77 #define AE_IMR_DEFAULT (AE_ISR_DMAR_TIMEOUT | AE_ISR_DMAW_TIMEOUT | \ 78 AE_ISR_PHY_LINKDOWN | \ 79 AE_ISR_TXS_UPDATED | AE_ISR_RXD_UPDATED ) 80 81 /* 82 * Ethernet address register. 83 */ 84 #define AE_EADDR0_REG 0x1488 /* 5 - 2 bytes */ 85 #define AE_EADDR1_REG 0x148c /* 1 - 0 bytes */ 86 87 /* 88 * Desriptor rings registers. 89 * L2 supports 64-bit addressing but all rings base addresses 90 * should have the same high 32 bits of address. 91 */ 92 #define AE_DESC_ADDR_HI_REG 0x1540 /* High 32 bits of ring base address. */ 93 #define AE_RXD_ADDR_LO_REG 0x1554 /* Low 32 bits of RxD ring address. */ 94 #define AE_TXD_ADDR_LO_REG 0x1544 /* Low 32 bits of TxD ring address. */ 95 #define AE_TXS_ADDR_LO_REG 0x154c /* Low 32 bits of TxS ring address. */ 96 #define AE_RXD_COUNT_REG 0x1558 /* Number of RxD descriptors in ring. 97 Should be 120-byte aligned (i.e. 98 the 'data' field of RxD should 99 have 128-byte alignment). */ 100 #define AE_TXD_BUFSIZE_REG 0x1548 /* Size of TxD ring in 4-byte units. 101 Should be 4-byte aligned. */ 102 #define AE_TXS_COUNT_REG 0x1550 /* Number of TxS descriptors in ring. 103 4 byte alignment. */ 104 #define AE_RXD_COUNT_MIN 16 105 #define AE_RXD_COUNT_MAX 512 106 #define AE_RXD_COUNT_DEFAULT 64 107 108 #define AE_TXD_BUFSIZE_MIN 4096 109 #define AE_TXD_BUFSIZE_MAX 65536 110 #define AE_TXD_BUFSIZE_DEFAULT 8192 111 112 #define AE_TXS_COUNT_MIN 8 /* Not sure. */ 113 #define AE_TXS_COUNT_MAX 160 114 #define AE_TXS_COUNT_DEFAULT 64 /* AE_TXD_BUFSIZE_DEFAULT / 128 */ 115 116 /* 117 * Inter-frame gap configuration register. 118 */ 119 #define AE_IFG_REG 0x1484 120 121 #define AE_IFG_TXIPG_DEFAULT 0x60 /* 96-bit IFG time. */ 122 #define AE_IFG_TXIPG_SHIFT 0 123 #define AE_IFG_TXIPG_MASK 0x7f 124 125 #define AE_IFG_RXIPG_DEFAULT 0x50 /* 80-bit IFG time. */ 126 #define AE_IFG_RXIPG_SHIFT 8 127 #define AE_IFG_RXIPG_MASK 0xff00 128 129 #define AE_IFG_IPGR1_DEFAULT 0x40 /* Carrier-sense window. */ 130 #define AE_IFG_IPGR1_SHIFT 16 131 #define AE_IFG_IPGR1_MASK 0x7f0000 132 133 #define AE_IFG_IPGR2_DEFAULT 0x60 /* IFG window. */ 134 #define AE_IFG_IPGR2_SHIFT 24 135 #define AE_IFG_IPGR2_MASK 0x7f000000 136 137 /* 138 * Half-duplex mode configuration register. 139 */ 140 #define AE_HDPX_REG 0x1498 141 142 /* Collision window. */ 143 #define AE_HDPX_LCOL_SHIFT 0 144 #define AE_HDPX_LCOL_MASK 0x000003ff 145 #define AE_HDPX_LCOL_DEFAULT 0x37 146 147 /* Max retransmission time, after that the packet will be discarded. */ 148 #define AE_HDPX_RETRY_SHIFT 12 149 #define AE_HDPX_RETRY_MASK 0x0000f000 150 #define AE_HDPX_RETRY_DEFAULT 0x0f 151 152 /* Alternative binary exponential back-off time. */ 153 #define AE_HDPX_ABEBT_SHIFT 20 154 #define AE_HDPX_ABEBT_MASK 0x00f00000 155 #define AE_HDPX_ABEBT_DEFAULT 0x0a 156 157 /* IFG to start JAM for collision based flow control (8-bit time units).*/ 158 #define AE_HDPX_JAMIPG_SHIFT 24 159 #define AE_HDPX_JAMIPG_MASK 0x0f000000 160 #define AE_HDPX_JAMIPG_DEFAULT 0x07 161 162 /* Allow the transmission of a packet which has been excessively deferred. */ 163 #define AE_HDPX_EXC_EN 0x00010000 164 /* No back-off on collision, immediately start the retransmission. */ 165 #define AE_HDPX_NO_BACK_C 0x00020000 166 /* No back-off on backpressure, immediately start the transmission. */ 167 #define AE_HDPX_NO_BACK_P 0x00040000 168 /* Alternative binary exponential back-off enable. */ 169 #define AE_HDPX_ABEBE 0x00080000 170 171 /* 172 * Interrupt moderation timer configuration register. 173 */ 174 #define AE_IMT_REG 0x1408 /* Timer value in 2 us units. */ 175 #define AE_IMT_MAX 65000 176 #define AE_IMT_MIN 50 177 #define AE_IMT_DEFAULT 100 /* 200 microseconds. */ 178 179 /* 180 * Interrupt clearing timer configuration register. 181 */ 182 #define AE_ICT_REG 0x140e /* Maximum time allowed to clear 183 interrupt. In 2 us units. */ 184 #define AE_ICT_DEFAULT 50000 /* 100ms */ 185 186 /* 187 * MTU configuration register. 188 */ 189 #define AE_MTU_REG 0x149c /* MTU size in bytes. */ 190 191 /* 192 * Cut-through configuration register. 193 */ 194 #define AE_CUT_THRESH_REG 0x1590 /* Cut-through threshold in unknown units. */ 195 #define AE_CUT_THRESH_DEFAULT 0x177 196 197 /* 198 * Flow-control configuration registers. 199 */ 200 #define AE_FLOW_THRESH_HI_REG 0x15a8 /* High watermark of RxD 201 overflow threshold. */ 202 #define AE_FLOW_THRESH_LO_REG 0x15aa /* Lower watermark of RxD 203 overflow threshold */ 204 205 /* 206 * Mailbox configuration registers. 207 */ 208 #define AE_MB_TXD_IDX_REG 0x15f0 /* TxD read index. */ 209 #define AE_MB_RXD_IDX_REG 0x15f4 /* RxD write index. */ 210 211 /* 212 * DMA configuration registers. 213 */ 214 #define AE_DMAREAD_REG 0x1580 /* Read DMA configuration register. */ 215 #define AE_DMAREAD_EN 1 216 #define AE_DMAWRITE_REG 0x15a0 /* Write DMA configuration register. */ 217 #define AE_DMAWRITE_EN 1 218 219 /* 220 * MAC configuration register. 221 */ 222 #define AE_MAC_REG 0x1480 223 224 #define AE_MAC_TX_EN 0x00000001 /* Enable transmit. */ 225 #define AE_MAC_RX_EN 0x00000002 /* Enable receive. */ 226 #define AE_MAC_TX_FLOW_EN 0x00000004 /* Enable Tx flow control. */ 227 #define AE_MAC_RX_FLOW_EN 0x00000008 /* Enable Rx flow control. */ 228 #define AE_MAC_LOOPBACK 0x00000010 /* Loopback at MII. */ 229 #define AE_MAC_FULL_DUPLEX 0x00000020 /* Enable full-duplex. */ 230 #define AE_MAC_TX_CRC_EN 0x00000040 /* Enable CRC generation. */ 231 #define AE_MAC_TX_AUTOPAD 0x00000080 /* Pad short frames. */ 232 #define AE_MAC_PREAMBLE_MASK 0x00003c00 /* Preamble length. */ 233 #define AE_MAC_PREAMBLE_SHIFT 10 234 #define AE_MAC_PREAMBLE_DEFAULT 0x07 /* By standard. */ 235 #define AE_MAC_RMVLAN_EN 0x00004000 /* Remove VLAN tags in 236 incoming packets. */ 237 #define AE_MAC_PROMISC_EN 0x00008000 /* Enable promiscue mode. */ 238 #define AE_MAC_TX_MAXBACKOFF 0x00100000 /* Unknown. */ 239 #define AE_MAC_MCAST_EN 0x02000000 /* Pass all multicast frames. */ 240 #define AE_MAC_BCAST_EN 0x04000000 /* Pass all broadcast frames. */ 241 #define AE_MAC_CLK_PHY 0x08000000 /* If 1 uses loopback clock 242 PHY, if 0 - system clock. */ 243 #define AE_HALFBUF_MASK 0xf0000000 /* Half-duplex retry buffer. */ 244 #define AE_HALFBUF_SHIFT 28 245 #define AE_HALFBUF_DEFAULT 2 /* XXX: From Linux. */ 246 247 /* 248 * MDIO control register. 249 */ 250 #define AE_MDIO_REG 0x1414 251 #define AE_MDIO_DATA_MASK 0xffff 252 #define AE_MDIO_DATA_SHIFT 0 253 #define AE_MDIO_REGADDR_MASK 0x1f0000 254 #define AE_MDIO_REGADDR_SHIFT 16 255 #define AE_MDIO_READ 0x00200000 /* Read operation. */ 256 #define AE_MDIO_SUP_PREAMBLE 0x00400000 /* Suppress preamble. */ 257 #define AE_MDIO_START 0x00800000 /* Initiate MDIO transfer. */ 258 #define AE_MDIO_CLK_SHIFT 24 /* Clock selection. */ 259 #define AE_MDIO_CLK_MASK 0x07000000 /* Clock selection. */ 260 #define AE_MDIO_CLK_25_4 0 /* Dividers? */ 261 #define AE_MDIO_CLK_25_6 2 262 #define AE_MDIO_CLK_25_8 3 263 #define AE_MDIO_CLK_25_10 4 264 #define AE_MDIO_CLK_25_14 5 265 #define AE_MDIO_CLK_25_20 6 266 #define AE_MDIO_CLK_25_28 7 267 #define AE_MDIO_BUSY 0x08000000 /* MDIO is busy. */ 268 269 /* 270 * Idle status register. 271 */ 272 #define AE_IDLE_REG 0x1410 273 274 /* 275 * Idle status bits. 276 * If bit is set then the corresponding module is in non-idle state. 277 */ 278 #define AE_IDLE_RXMAC 1 279 #define AE_IDLE_TXMAC 2 280 #define AE_IDLE_DMAREAD 8 281 #define AE_IDLE_DMAWRITE 4 282 283 /* 284 * Multicast hash tables registers. 285 */ 286 #define AE_REG_MHT0 0x1490 287 #define AE_REG_MHT1 0x1494 288 289 /* 290 * Wake on lan (WOL). 291 */ 292 #define AE_WOL_REG 0x14a0 293 #define AE_WOL_MAGIC 0x00000004 294 #define AE_WOL_MAGIC_PME 0x00000008 295 #define AE_WOL_LNKCHG 0x00000010 296 #define AE_WOL_LNKCHG_PME 0x00000020 297 298 /* 299 * PCIE configuration registers. Descriptions unknown. 300 */ 301 #define AE_PCIE_LTSSM_TESTMODE_REG 0x12fc 302 #define AE_PCIE_LTSSM_TESTMODE_DEFAULT 0x6500 303 #define AE_PCIE_DLL_TX_CTRL_REG 0x1104 304 #define AE_PCIE_DLL_TX_CTRL_SEL_NOR_CLK 0x0400 305 #define AE_PCIE_DLL_TX_CTRL_DEFAULT 0x0568 306 #define AE_PCIE_PHYMISC_REG 0x1000 307 #define AE_PCIE_PHYMISC_FORCE_RCV_DET 0x4 308 309 /* 310 * PHY enable register. 311 */ 312 #define AE_PHY_ENABLE_REG 0x140c 313 #define AE_PHY_ENABLE 1 314 315 /* 316 * VPD registers. 317 */ 318 #define AE_VPD_CAP_REG 0x6c /* Command register. */ 319 #define AE_VPD_CAP_ID_MASK 0xff 320 #define AE_VPD_CAP_ID_SHIFT 0 321 #define AE_VPD_CAP_NEXT_MASK 0xff00 322 #define AE_VPD_CAP_NEXT_SHIFT 8 323 #define AE_VPD_CAP_ADDR_MASK 0x7fff0000 324 #define AE_VPD_CAP_ADDR_SHIFT 16 325 #define AE_VPD_CAP_DONE 0x80000000 326 327 #define AE_VPD_DATA_REG 0x70 /* Data register. */ 328 329 #define AE_VPD_NREGS 64 /* Maximum number of VPD regs. */ 330 #define AE_VPD_SIG_MASK 0xff 331 #define AE_VPD_SIG 0x5a /* VPD block signature. */ 332 #define AE_VPD_REG_SHIFT 16 /* Register id offset. */ 333 334 /* 335 * SPI registers. 336 */ 337 #define AE_SPICTL_REG 0x200 338 #define AE_SPICTL_VPD_EN 0x2000 /* Enable VPD. */ 339 340 /* 341 * PHY-specific registers constants. 342 */ 343 #define AE_PHY_DBG_ADDR 0x1d 344 #define AE_PHY_DBG_DATA 0x1e 345 #define AE_PHY_DBG_POWERSAVE 0x1000 346 347 /* 348 * TxD flags. 349 */ 350 #define AE_TXD_INSERT_VTAG 0x8000 /* Insert VLAN tag on transfer. */ 351 352 /* 353 * TxS flags. 354 */ 355 #define AE_TXS_SUCCESS 0x0001 /* Packed transmitted successfully. */ 356 #define AE_TXS_BCAST 0x0002 /* Transmitted broadcast frame. */ 357 #define AE_TXS_MCAST 0x0004 /* Transmitted multicast frame. */ 358 #define AE_TXS_PAUSE 0x0008 /* Transmitted pause frame. */ 359 #define AE_TXS_CTRL 0x0010 /* Transmitted control frame. */ 360 #define AE_TXS_DEFER 0x0020 /* Frame transmitted with defer. */ 361 #define AE_TXS_EXCDEFER 0x0040 /* Excessive collision. */ 362 #define AE_TXS_SINGLECOL 0x0080 /* Single collision occuried. */ 363 #define AE_TXS_MULTICOL 0x0100 /* Multiple collisions occuried. */ 364 #define AE_TXS_LATECOL 0x0200 /* Late collision occuried. */ 365 #define AE_TXS_ABORTCOL 0x0400 /* Frame abort due to collisions. */ 366 #define AE_TXS_UNDERRUN 0x0800 /* Tx SRAM underrun occuried. */ 367 #define AE_TXS_UPDATE 0x8000 368 369 /* 370 * RxD flags. 371 */ 372 #define AE_RXD_SUCCESS 0x0001 373 #define AE_RXD_BCAST 0x0002 /* Broadcast frame received. */ 374 #define AE_RXD_MCAST 0x0004 /* Multicast frame received. */ 375 #define AE_RXD_PAUSE 0x0008 /* Pause frame received. */ 376 #define AE_RXD_CTRL 0x0010 /* Control frame received. */ 377 #define AE_RXD_CRCERR 0x0020 /* Invalid frame CRC. */ 378 #define AE_RXD_CODEERR 0x0040 /* Invalid frame opcode. */ 379 #define AE_RXD_RUNT 0x0080 /* Runt frame received. */ 380 #define AE_RXD_FRAG 0x0100 /* Collision fragment received. */ 381 #define AE_RXD_TRUNC 0x0200 /* The frame was truncated due 382 to Rx SRAM underrun. */ 383 #define AE_RXD_ALIGN 0x0400 /* Frame alignment error. */ 384 #define AE_RXD_HAS_VLAN 0x0800 /* VLAN tag present. */ 385 #define AE_RXD_UPDATE 0x8000 386