1 /*- 2 * Copyright (c) 2000 Michael Smith 3 * Copyright (c) 2000 BSDi 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 31 #include "opt_acpi.h" 32 #include <sys/param.h> 33 #include <sys/bus.h> 34 #include <sys/malloc.h> 35 #include <sys/kernel.h> 36 37 #include <contrib/dev/acpica/include/acpi.h> 38 #include <contrib/dev/acpica/include/accommon.h> 39 40 #include <dev/acpica/acpivar.h> 41 #include <dev/acpica/acpi_pcibvar.h> 42 43 #include <dev/pci/pcivar.h> 44 #include "pcib_if.h" 45 46 /* Hooks for the ACPI CA debugging infrastructure. */ 47 #define _COMPONENT ACPI_BUS 48 ACPI_MODULE_NAME("PCI") 49 50 ACPI_SERIAL_DECL(pcib, "ACPI PCI bus methods"); 51 52 /* 53 * For locking, we assume the caller is not concurrent since this is 54 * triggered by newbus methods. 55 */ 56 57 struct prt_lookup_request { 58 ACPI_PCI_ROUTING_TABLE *pr_entry; 59 u_int pr_pin; 60 u_int pr_slot; 61 }; 62 63 typedef void prt_entry_handler(ACPI_PCI_ROUTING_TABLE *entry, void *arg); 64 65 static void prt_attach_devices(ACPI_PCI_ROUTING_TABLE *entry, void *arg); 66 static void prt_lookup_device(ACPI_PCI_ROUTING_TABLE *entry, void *arg); 67 static void prt_walk_table(ACPI_BUFFER *prt, prt_entry_handler *handler, 68 void *arg); 69 70 static void 71 prt_walk_table(ACPI_BUFFER *prt, prt_entry_handler *handler, void *arg) 72 { 73 ACPI_PCI_ROUTING_TABLE *entry; 74 char *prtptr; 75 76 /* First check to see if there is a table to walk. */ 77 if (prt == NULL || prt->Pointer == NULL) 78 return; 79 80 /* Walk the table executing the handler function for each entry. */ 81 prtptr = prt->Pointer; 82 entry = (ACPI_PCI_ROUTING_TABLE *)prtptr; 83 while (entry->Length != 0) { 84 handler(entry, arg); 85 prtptr += entry->Length; 86 entry = (ACPI_PCI_ROUTING_TABLE *)prtptr; 87 } 88 } 89 90 static void 91 prt_attach_devices(ACPI_PCI_ROUTING_TABLE *entry, void *arg) 92 { 93 ACPI_HANDLE handle; 94 device_t child, pcib; 95 int error; 96 97 /* We only care about entries that reference a link device. */ 98 if (entry->Source == NULL || entry->Source[0] == '\0') 99 return; 100 101 /* 102 * In practice, we only see SourceIndex's of 0 out in the wild. 103 * When indices != 0 have been found, they've been bugs in the ASL. 104 */ 105 if (entry->SourceIndex != 0) 106 return; 107 108 /* Lookup the associated handle and device. */ 109 pcib = (device_t)arg; 110 if (ACPI_FAILURE(AcpiGetHandle(ACPI_ROOT_OBJECT, entry->Source, &handle))) 111 return; 112 child = acpi_get_device(handle); 113 if (child == NULL) 114 return; 115 116 /* If the device hasn't been probed yet, force it to do so. */ 117 error = device_probe_and_attach(child); 118 if (error != 0) { 119 device_printf(pcib, "failed to force attach of %s\n", 120 acpi_name(handle)); 121 return; 122 } 123 124 /* Add a reference for a specific bus/device/pin tuple. */ 125 acpi_pci_link_add_reference(child, entry->SourceIndex, pcib, 126 ACPI_ADR_PCI_SLOT(entry->Address), entry->Pin); 127 } 128 129 int 130 acpi_pcib_attach(device_t dev, ACPI_BUFFER *prt, int busno) 131 { 132 ACPI_STATUS status; 133 int error; 134 135 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 136 137 /* 138 * Get the PCI interrupt routing table for this bus. If we can't 139 * get it, this is not an error but may reduce functionality. There 140 * are several valid bridges in the field that do not have a _PRT, so 141 * only warn about missing tables if bootverbose is set. 142 */ 143 prt->Length = ACPI_ALLOCATE_BUFFER; 144 status = AcpiGetIrqRoutingTable(acpi_get_handle(dev), prt); 145 if (ACPI_FAILURE(status) && (bootverbose || status != AE_NOT_FOUND)) 146 device_printf(dev, 147 "could not get PCI interrupt routing table for %s - %s\n", 148 acpi_name(acpi_get_handle(dev)), AcpiFormatException(status)); 149 150 /* 151 * Attach the PCI bus proper. 152 */ 153 if (device_add_child(dev, "pci", busno) == NULL) { 154 device_printf(device_get_parent(dev), "couldn't attach pci bus\n"); 155 return_VALUE(ENXIO); 156 } 157 158 /* 159 * Now go scan the bus. 160 */ 161 prt_walk_table(prt, prt_attach_devices, dev); 162 163 error = bus_generic_attach(dev); 164 return_VALUE(error); 165 } 166 167 static void 168 prt_lookup_device(ACPI_PCI_ROUTING_TABLE *entry, void *arg) 169 { 170 struct prt_lookup_request *pr; 171 172 pr = (struct prt_lookup_request *)arg; 173 if (pr->pr_entry != NULL) 174 return; 175 176 /* 177 * Compare the slot number (high word of Address) and pin number 178 * (note that ACPI uses 0 for INTA) to check for a match. 179 * 180 * Note that the low word of the Address field (function number) 181 * is required by the specification to be 0xffff. We don't risk 182 * checking it here. 183 */ 184 if (ACPI_ADR_PCI_SLOT(entry->Address) == pr->pr_slot && 185 entry->Pin == pr->pr_pin) 186 pr->pr_entry = entry; 187 } 188 189 /* 190 * Route an interrupt for a child of the bridge. 191 */ 192 int 193 acpi_pcib_route_interrupt(device_t pcib, device_t dev, int pin, 194 ACPI_BUFFER *prtbuf) 195 { 196 ACPI_PCI_ROUTING_TABLE *prt; 197 struct prt_lookup_request pr; 198 ACPI_HANDLE lnkdev; 199 int interrupt; 200 201 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 202 203 interrupt = PCI_INVALID_IRQ; 204 205 /* ACPI numbers pins 0-3, not 1-4 like the BIOS. */ 206 pin--; 207 208 ACPI_SERIAL_BEGIN(pcib); 209 210 /* Search for a matching entry in the routing table. */ 211 pr.pr_entry = NULL; 212 pr.pr_pin = pin; 213 pr.pr_slot = pci_get_slot(dev); 214 prt_walk_table(prtbuf, prt_lookup_device, &pr); 215 if (pr.pr_entry == NULL) { 216 device_printf(pcib, "no PRT entry for %d.%d.INT%c\n", pci_get_bus(dev), 217 pci_get_slot(dev), 'A' + pin); 218 goto out; 219 } 220 prt = pr.pr_entry; 221 222 if (bootverbose) { 223 device_printf(pcib, "matched entry for %d.%d.INT%c", 224 pci_get_bus(dev), pci_get_slot(dev), 'A' + pin); 225 if (prt->Source != NULL && prt->Source[0] != '\0') 226 printf(" (src %s:%u)", prt->Source, prt->SourceIndex); 227 printf("\n"); 228 } 229 230 /* 231 * If source is empty/NULL, the source index is a global IRQ number 232 * and it's hard-wired so we're done. 233 * 234 * XXX: If the source index is non-zero, ignore the source device and 235 * assume that this is a hard-wired entry. 236 */ 237 if (prt->Source == NULL || prt->Source[0] == '\0' || 238 prt->SourceIndex != 0) { 239 if (bootverbose) 240 device_printf(pcib, "slot %d INT%c hardwired to IRQ %d\n", 241 pci_get_slot(dev), 'A' + pin, prt->SourceIndex); 242 if (prt->SourceIndex) { 243 interrupt = prt->SourceIndex; 244 BUS_CONFIG_INTR(dev, interrupt, INTR_TRIGGER_LEVEL, 245 INTR_POLARITY_LOW); 246 } else 247 device_printf(pcib, "error: invalid hard-wired IRQ of 0\n"); 248 goto out; 249 } 250 251 /* 252 * We have to find the source device (PCI interrupt link device). 253 */ 254 if (ACPI_FAILURE(AcpiGetHandle(ACPI_ROOT_OBJECT, prt->Source, &lnkdev))) { 255 device_printf(pcib, "couldn't find PCI interrupt link device %s\n", 256 prt->Source); 257 goto out; 258 } 259 interrupt = acpi_pci_link_route_interrupt(acpi_get_device(lnkdev), 260 prt->SourceIndex); 261 262 if (bootverbose && PCI_INTERRUPT_VALID(interrupt)) 263 device_printf(pcib, "slot %d INT%c routed to irq %d via %s\n", 264 pci_get_slot(dev), 'A' + pin, interrupt, acpi_name(lnkdev)); 265 266 out: 267 ACPI_SERIAL_END(pcib); 268 269 return_VALUE(interrupt); 270 } 271 272 int 273 acpi_pcib_power_for_sleep(device_t pcib, device_t dev, int *pstate) 274 { 275 device_t acpi_dev; 276 277 acpi_dev = devclass_get_device(devclass_find("acpi"), 0); 278 acpi_device_pwr_for_sleep(acpi_dev, dev, pstate); 279 return (0); 280 } 281