xref: /freebsd/sys/dev/acpica/acpi_pcib.c (revision 3c4ba5f55438f7afd4f4b0b56f88f2bb505fd6a6)
1 /*-
2  * Copyright (c) 2000 Michael Smith
3  * Copyright (c) 2000 BSDi
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  */
27 
28 #include <sys/cdefs.h>
29 __FBSDID("$FreeBSD$");
30 
31 #include "opt_acpi.h"
32 #include <sys/param.h>
33 #include <sys/bus.h>
34 #include <sys/malloc.h>
35 #include <sys/kernel.h>
36 
37 #include <contrib/dev/acpica/include/acpi.h>
38 #include <contrib/dev/acpica/include/accommon.h>
39 
40 #include <dev/acpica/acpivar.h>
41 #include <dev/acpica/acpi_pcibvar.h>
42 
43 #include <dev/pci/pcivar.h>
44 #include "pcib_if.h"
45 
46 /* Hooks for the ACPI CA debugging infrastructure. */
47 #define _COMPONENT	ACPI_BUS
48 ACPI_MODULE_NAME("PCI")
49 
50 ACPI_SERIAL_DECL(pcib, "ACPI PCI bus methods");
51 
52 /*
53  * For locking, we assume the caller is not concurrent since this is
54  * triggered by newbus methods.
55  */
56 
57 struct prt_lookup_request {
58     ACPI_PCI_ROUTING_TABLE *pr_entry;
59     u_int	pr_pin;
60     u_int	pr_slot;
61 };
62 
63 typedef	void prt_entry_handler(ACPI_PCI_ROUTING_TABLE *entry, void *arg);
64 
65 static void	prt_attach_devices(ACPI_PCI_ROUTING_TABLE *entry, void *arg);
66 static void	prt_lookup_device(ACPI_PCI_ROUTING_TABLE *entry, void *arg);
67 static void	prt_walk_table(ACPI_BUFFER *prt, prt_entry_handler *handler,
68 		    void *arg);
69 
70 static void
71 prt_walk_table(ACPI_BUFFER *prt, prt_entry_handler *handler, void *arg)
72 {
73     ACPI_PCI_ROUTING_TABLE *entry;
74     char *prtptr;
75 
76     /* First check to see if there is a table to walk. */
77     if (prt == NULL || prt->Pointer == NULL)
78 	return;
79 
80     /* Walk the table executing the handler function for each entry. */
81     prtptr = prt->Pointer;
82     entry = (ACPI_PCI_ROUTING_TABLE *)prtptr;
83     while (entry->Length != 0) {
84 	handler(entry, arg);
85 	prtptr += entry->Length;
86 	entry = (ACPI_PCI_ROUTING_TABLE *)prtptr;
87     }
88 }
89 
90 static void
91 prt_attach_devices(ACPI_PCI_ROUTING_TABLE *entry, void *arg)
92 {
93     ACPI_HANDLE handle;
94     device_t child, pcib;
95     int error;
96 
97     /* We only care about entries that reference a link device. */
98     if (entry->Source[0] == '\0')
99 	return;
100 
101     /*
102      * In practice, we only see SourceIndex's of 0 out in the wild.
103      * When indices != 0 have been found, they've been bugs in the ASL.
104      */
105     if (entry->SourceIndex != 0)
106 	return;
107 
108     /* Lookup the associated handle and device. */
109     pcib = (device_t)arg;
110     if (ACPI_FAILURE(AcpiGetHandle(ACPI_ROOT_OBJECT, entry->Source, &handle)))
111 	return;
112     child = acpi_get_device(handle);
113     if (child == NULL)
114 	return;
115 
116     /* If the device hasn't been probed yet, force it to do so. */
117     error = device_probe_and_attach(child);
118     if (error != 0) {
119 	device_printf(pcib, "failed to force attach of %s\n",
120 	    acpi_name(handle));
121 	return;
122     }
123 
124     /* Add a reference for a specific bus/device/pin tuple. */
125     acpi_pci_link_add_reference(child, entry->SourceIndex, pcib,
126 	ACPI_ADR_PCI_SLOT(entry->Address), entry->Pin);
127 }
128 
129 void
130 acpi_pcib_fetch_prt(device_t dev, ACPI_BUFFER *prt)
131 {
132     ACPI_STATUS status;
133 
134     ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
135 
136     /*
137      * Get the PCI interrupt routing table for this bus.  If we can't
138      * get it, this is not an error but may reduce functionality.  There
139      * are several valid bridges in the field that do not have a _PRT, so
140      * only warn about missing tables if bootverbose is set.
141      */
142     prt->Length = ACPI_ALLOCATE_BUFFER;
143     status = AcpiGetIrqRoutingTable(acpi_get_handle(dev), prt);
144     if (ACPI_FAILURE(status) && (bootverbose || status != AE_NOT_FOUND))
145 	device_printf(dev,
146 	    "could not get PCI interrupt routing table for %s - %s\n",
147 	    acpi_name(acpi_get_handle(dev)), AcpiFormatException(status));
148 
149     /*
150      * Ensure all the link devices are attached.
151      */
152     prt_walk_table(prt, prt_attach_devices, dev);
153 }
154 
155 static void
156 prt_lookup_device(ACPI_PCI_ROUTING_TABLE *entry, void *arg)
157 {
158     struct prt_lookup_request *pr;
159 
160     pr = (struct prt_lookup_request *)arg;
161     if (pr->pr_entry != NULL)
162 	return;
163 
164     /*
165      * Compare the slot number (high word of Address) and pin number
166      * (note that ACPI uses 0 for INTA) to check for a match.
167      *
168      * Note that the low word of the Address field (function number)
169      * is required by the specification to be 0xffff.  We don't risk
170      * checking it here.
171      */
172     if (ACPI_ADR_PCI_SLOT(entry->Address) == pr->pr_slot &&
173 	entry->Pin == pr->pr_pin)
174 	    pr->pr_entry = entry;
175 }
176 
177 /*
178  * Route an interrupt for a child of the bridge.
179  */
180 int
181 acpi_pcib_route_interrupt(device_t pcib, device_t dev, int pin,
182     ACPI_BUFFER *prtbuf)
183 {
184     ACPI_PCI_ROUTING_TABLE *prt;
185     struct prt_lookup_request pr;
186     ACPI_HANDLE lnkdev;
187     int interrupt;
188 
189     ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
190 
191     lnkdev = NULL;
192     interrupt = PCI_INVALID_IRQ;
193 
194     /* ACPI numbers pins 0-3, not 1-4 like the BIOS. */
195     pin--;
196 
197     ACPI_SERIAL_BEGIN(pcib);
198 
199     /* Search for a matching entry in the routing table. */
200     pr.pr_entry = NULL;
201     pr.pr_pin = pin;
202     pr.pr_slot = pci_get_slot(dev);
203     prt_walk_table(prtbuf, prt_lookup_device, &pr);
204     if (pr.pr_entry == NULL) {
205 	device_printf(pcib, "no PRT entry for %d.%d.INT%c\n", pci_get_bus(dev),
206 	    pci_get_slot(dev), 'A' + pin);
207 	goto out;
208     }
209     prt = pr.pr_entry;
210 
211     if (bootverbose) {
212 	device_printf(pcib, "matched entry for %d.%d.INT%c",
213 	    pci_get_bus(dev), pci_get_slot(dev), 'A' + pin);
214 	if (prt->Source[0] != '\0')
215 		printf(" (src %s:%u)", prt->Source, prt->SourceIndex);
216 	printf("\n");
217     }
218 
219     /*
220      * If source is empty/NULL, the source index is a global IRQ number
221      * and it's hard-wired so we're done.
222      *
223      * XXX: If the source index is non-zero, ignore the source device and
224      * assume that this is a hard-wired entry.
225      */
226     if (prt->Source[0] == '\0' || prt->SourceIndex != 0) {
227 	if (bootverbose)
228 	    device_printf(pcib, "slot %d INT%c hardwired to IRQ %d\n",
229 		pci_get_slot(dev), 'A' + pin, prt->SourceIndex);
230 	if (prt->SourceIndex) {
231 	    interrupt = prt->SourceIndex;
232 	    BUS_CONFIG_INTR(dev, interrupt, INTR_TRIGGER_LEVEL,
233 		INTR_POLARITY_LOW);
234 	} else
235 	    device_printf(pcib, "error: invalid hard-wired IRQ of 0\n");
236 	goto out;
237     }
238 
239     /*
240      * We have to find the source device (PCI interrupt link device).
241      */
242     if (ACPI_FAILURE(AcpiGetHandle(ACPI_ROOT_OBJECT, prt->Source, &lnkdev))) {
243 	device_printf(pcib, "couldn't find PCI interrupt link device %s\n",
244 	    prt->Source);
245 	goto out;
246     }
247     interrupt = acpi_pci_link_route_interrupt(acpi_get_device(lnkdev),
248 	prt->SourceIndex);
249 
250     if (bootverbose && PCI_INTERRUPT_VALID(interrupt))
251 	device_printf(pcib, "slot %d INT%c routed to irq %d via %s\n",
252 	    pci_get_slot(dev), 'A' + pin, interrupt, acpi_name(lnkdev));
253 
254 out:
255     ACPI_SERIAL_END(pcib);
256 #ifdef INTRNG
257     if (PCI_INTERRUPT_VALID(interrupt)) {
258 	interrupt  = acpi_map_intr(dev, interrupt, lnkdev);
259 	KASSERT(PCI_INTERRUPT_VALID(interrupt), ("mapping fail"));
260     }
261 #endif
262     return_VALUE(interrupt);
263 }
264 
265 int
266 acpi_pcib_power_for_sleep(device_t pcib, device_t dev, int *pstate)
267 {
268     device_t acpi_dev;
269 
270     acpi_dev = devclass_get_device(devclass_find("acpi"), 0);
271     acpi_device_pwr_for_sleep(acpi_dev, dev, pstate);
272     return (0);
273 }
274 
275 int
276 acpi_pcib_get_cpus(device_t pcib, device_t dev, enum cpu_sets op,
277     size_t setsize, cpuset_t *cpuset)
278 {
279 
280 	return (bus_get_cpus(pcib, op, setsize, cpuset));
281 }
282