1 /*- 2 * Copyright (c) 2003-2007 Nate Lawson 3 * Copyright (c) 2000 Michael Smith 4 * Copyright (c) 2000 BSDi 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include "opt_acpi.h" 33 #include <sys/param.h> 34 #include <sys/kernel.h> 35 #include <sys/ktr.h> 36 #include <sys/bus.h> 37 #include <sys/lock.h> 38 #include <sys/malloc.h> 39 #include <sys/module.h> 40 #include <sys/sx.h> 41 42 #include <machine/bus.h> 43 #include <machine/resource.h> 44 #include <sys/rman.h> 45 46 #include <contrib/dev/acpica/include/acpi.h> 47 #include <contrib/dev/acpica/include/accommon.h> 48 49 #include <dev/acpica/acpivar.h> 50 51 /* Hooks for the ACPI CA debugging infrastructure */ 52 #define _COMPONENT ACPI_EC 53 ACPI_MODULE_NAME("EC") 54 55 /* 56 * EC_COMMAND: 57 * ----------- 58 */ 59 typedef UINT8 EC_COMMAND; 60 61 #define EC_COMMAND_UNKNOWN ((EC_COMMAND) 0x00) 62 #define EC_COMMAND_READ ((EC_COMMAND) 0x80) 63 #define EC_COMMAND_WRITE ((EC_COMMAND) 0x81) 64 #define EC_COMMAND_BURST_ENABLE ((EC_COMMAND) 0x82) 65 #define EC_COMMAND_BURST_DISABLE ((EC_COMMAND) 0x83) 66 #define EC_COMMAND_QUERY ((EC_COMMAND) 0x84) 67 68 /* 69 * EC_STATUS: 70 * ---------- 71 * The encoding of the EC status register is illustrated below. 72 * Note that a set bit (1) indicates the property is TRUE 73 * (e.g. if bit 0 is set then the output buffer is full). 74 * +-+-+-+-+-+-+-+-+ 75 * |7|6|5|4|3|2|1|0| 76 * +-+-+-+-+-+-+-+-+ 77 * | | | | | | | | 78 * | | | | | | | +- Output Buffer Full? 79 * | | | | | | +--- Input Buffer Full? 80 * | | | | | +----- <reserved> 81 * | | | | +------- Data Register is Command Byte? 82 * | | | +--------- Burst Mode Enabled? 83 * | | +----------- SCI Event? 84 * | +------------- SMI Event? 85 * +--------------- <reserved> 86 * 87 */ 88 typedef UINT8 EC_STATUS; 89 90 #define EC_FLAG_OUTPUT_BUFFER ((EC_STATUS) 0x01) 91 #define EC_FLAG_INPUT_BUFFER ((EC_STATUS) 0x02) 92 #define EC_FLAG_DATA_IS_CMD ((EC_STATUS) 0x08) 93 #define EC_FLAG_BURST_MODE ((EC_STATUS) 0x10) 94 95 /* 96 * EC_EVENT: 97 * --------- 98 */ 99 typedef UINT8 EC_EVENT; 100 101 #define EC_EVENT_UNKNOWN ((EC_EVENT) 0x00) 102 #define EC_EVENT_OUTPUT_BUFFER_FULL ((EC_EVENT) 0x01) 103 #define EC_EVENT_INPUT_BUFFER_EMPTY ((EC_EVENT) 0x02) 104 #define EC_EVENT_SCI ((EC_EVENT) 0x20) 105 #define EC_EVENT_SMI ((EC_EVENT) 0x40) 106 107 /* Data byte returned after burst enable indicating it was successful. */ 108 #define EC_BURST_ACK 0x90 109 110 /* 111 * Register access primitives 112 */ 113 #define EC_GET_DATA(sc) \ 114 bus_space_read_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0) 115 116 #define EC_SET_DATA(sc, v) \ 117 bus_space_write_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0, (v)) 118 119 #define EC_GET_CSR(sc) \ 120 bus_space_read_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0) 121 122 #define EC_SET_CSR(sc, v) \ 123 bus_space_write_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0, (v)) 124 125 /* Additional params to pass from the probe routine */ 126 struct acpi_ec_params { 127 int glk; 128 int gpe_bit; 129 ACPI_HANDLE gpe_handle; 130 int uid; 131 }; 132 133 /* 134 * Driver softc. 135 */ 136 struct acpi_ec_softc { 137 device_t ec_dev; 138 ACPI_HANDLE ec_handle; 139 int ec_uid; 140 ACPI_HANDLE ec_gpehandle; 141 UINT8 ec_gpebit; 142 143 int ec_data_rid; 144 struct resource *ec_data_res; 145 bus_space_tag_t ec_data_tag; 146 bus_space_handle_t ec_data_handle; 147 148 int ec_csr_rid; 149 struct resource *ec_csr_res; 150 bus_space_tag_t ec_csr_tag; 151 bus_space_handle_t ec_csr_handle; 152 153 int ec_glk; 154 int ec_glkhandle; 155 int ec_burstactive; 156 int ec_sci_pend; 157 volatile u_int ec_gencount; 158 int ec_suspending; 159 }; 160 161 /* 162 * XXX njl 163 * I couldn't find it in the spec but other implementations also use a 164 * value of 1 ms for the time to acquire global lock. 165 */ 166 #define EC_LOCK_TIMEOUT 1000 167 168 /* Default delay in microseconds between each run of the status polling loop. */ 169 #define EC_POLL_DELAY 50 170 171 /* Total time in ms spent waiting for a response from EC. */ 172 #define EC_TIMEOUT 750 173 174 #define EVENT_READY(event, status) \ 175 (((event) == EC_EVENT_OUTPUT_BUFFER_FULL && \ 176 ((status) & EC_FLAG_OUTPUT_BUFFER) != 0) || \ 177 ((event) == EC_EVENT_INPUT_BUFFER_EMPTY && \ 178 ((status) & EC_FLAG_INPUT_BUFFER) == 0)) 179 180 ACPI_SERIAL_DECL(ec, "ACPI embedded controller"); 181 182 static SYSCTL_NODE(_debug_acpi, OID_AUTO, ec, 183 CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 184 "EC debugging"); 185 186 static int ec_burst_mode; 187 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, burst, CTLFLAG_RWTUN, &ec_burst_mode, 0, 188 "Enable use of burst mode (faster for nearly all systems)"); 189 static int ec_polled_mode; 190 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, polled, CTLFLAG_RWTUN, &ec_polled_mode, 0, 191 "Force use of polled mode (only if interrupt mode doesn't work)"); 192 static int ec_timeout = EC_TIMEOUT; 193 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout, CTLFLAG_RWTUN, &ec_timeout, 194 EC_TIMEOUT, "Total time spent waiting for a response (poll+sleep)"); 195 196 static ACPI_STATUS 197 EcLock(struct acpi_ec_softc *sc) 198 { 199 ACPI_STATUS status; 200 201 /* If _GLK is non-zero, acquire the global lock. */ 202 status = AE_OK; 203 if (sc->ec_glk) { 204 status = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->ec_glkhandle); 205 if (ACPI_FAILURE(status)) 206 return (status); 207 } 208 ACPI_SERIAL_BEGIN(ec); 209 return (status); 210 } 211 212 static void 213 EcUnlock(struct acpi_ec_softc *sc) 214 { 215 ACPI_SERIAL_END(ec); 216 if (sc->ec_glk) 217 AcpiReleaseGlobalLock(sc->ec_glkhandle); 218 } 219 220 static UINT32 EcGpeHandler(ACPI_HANDLE, UINT32, void *); 221 static ACPI_STATUS EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, 222 void *Context, void **return_Context); 223 static ACPI_STATUS EcSpaceHandler(UINT32 Function, 224 ACPI_PHYSICAL_ADDRESS Address, 225 UINT32 Width, UINT64 *Value, 226 void *Context, void *RegionContext); 227 static ACPI_STATUS EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, 228 u_int gen_count); 229 static ACPI_STATUS EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd); 230 static ACPI_STATUS EcRead(struct acpi_ec_softc *sc, UINT8 Address, 231 UINT8 *Data); 232 static ACPI_STATUS EcWrite(struct acpi_ec_softc *sc, UINT8 Address, 233 UINT8 Data); 234 static int acpi_ec_probe(device_t dev); 235 static int acpi_ec_attach(device_t dev); 236 static int acpi_ec_suspend(device_t dev); 237 static int acpi_ec_resume(device_t dev); 238 static int acpi_ec_shutdown(device_t dev); 239 static int acpi_ec_read_method(device_t dev, u_int addr, 240 UINT64 *val, int width); 241 static int acpi_ec_write_method(device_t dev, u_int addr, 242 UINT64 val, int width); 243 244 static device_method_t acpi_ec_methods[] = { 245 /* Device interface */ 246 DEVMETHOD(device_probe, acpi_ec_probe), 247 DEVMETHOD(device_attach, acpi_ec_attach), 248 DEVMETHOD(device_suspend, acpi_ec_suspend), 249 DEVMETHOD(device_resume, acpi_ec_resume), 250 DEVMETHOD(device_shutdown, acpi_ec_shutdown), 251 252 /* Embedded controller interface */ 253 DEVMETHOD(acpi_ec_read, acpi_ec_read_method), 254 DEVMETHOD(acpi_ec_write, acpi_ec_write_method), 255 256 DEVMETHOD_END 257 }; 258 259 static driver_t acpi_ec_driver = { 260 "acpi_ec", 261 acpi_ec_methods, 262 sizeof(struct acpi_ec_softc), 263 }; 264 265 static devclass_t acpi_ec_devclass; 266 DRIVER_MODULE(acpi_ec, acpi, acpi_ec_driver, acpi_ec_devclass, 0, 0); 267 MODULE_DEPEND(acpi_ec, acpi, 1, 1, 1); 268 269 /* 270 * Look for an ECDT and if we find one, set up default GPE and 271 * space handlers to catch attempts to access EC space before 272 * we have a real driver instance in place. 273 * 274 * TODO: Some old Gateway laptops need us to fake up an ECDT or 275 * otherwise attach early so that _REG methods can run. 276 */ 277 void 278 acpi_ec_ecdt_probe(device_t parent) 279 { 280 ACPI_TABLE_ECDT *ecdt; 281 ACPI_STATUS status; 282 device_t child; 283 ACPI_HANDLE h; 284 struct acpi_ec_params *params; 285 286 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 287 288 /* Find and validate the ECDT. */ 289 status = AcpiGetTable(ACPI_SIG_ECDT, 1, (ACPI_TABLE_HEADER **)&ecdt); 290 if (ACPI_FAILURE(status) || 291 ecdt->Control.BitWidth != 8 || 292 ecdt->Data.BitWidth != 8) { 293 return; 294 } 295 296 /* Create the child device with the given unit number. */ 297 child = BUS_ADD_CHILD(parent, 3, "acpi_ec", ecdt->Uid); 298 if (child == NULL) { 299 printf("%s: can't add child\n", __func__); 300 return; 301 } 302 303 /* Find and save the ACPI handle for this device. */ 304 status = AcpiGetHandle(NULL, ecdt->Id, &h); 305 if (ACPI_FAILURE(status)) { 306 device_delete_child(parent, child); 307 printf("%s: can't get handle\n", __func__); 308 return; 309 } 310 acpi_set_handle(child, h); 311 312 /* Set the data and CSR register addresses. */ 313 bus_set_resource(child, SYS_RES_IOPORT, 0, ecdt->Data.Address, 314 /*count*/1); 315 bus_set_resource(child, SYS_RES_IOPORT, 1, ecdt->Control.Address, 316 /*count*/1); 317 318 /* 319 * Store values for the probe/attach routines to use. Store the 320 * ECDT GPE bit and set the global lock flag according to _GLK. 321 * Note that it is not perfectly correct to be evaluating a method 322 * before initializing devices, but in practice this function 323 * should be safe to call at this point. 324 */ 325 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO); 326 params->gpe_handle = NULL; 327 params->gpe_bit = ecdt->Gpe; 328 params->uid = ecdt->Uid; 329 acpi_GetInteger(h, "_GLK", ¶ms->glk); 330 acpi_set_private(child, params); 331 332 /* Finish the attach process. */ 333 if (device_probe_and_attach(child) != 0) 334 device_delete_child(parent, child); 335 } 336 337 static int 338 acpi_ec_probe(device_t dev) 339 { 340 ACPI_BUFFER buf; 341 ACPI_HANDLE h; 342 ACPI_OBJECT *obj; 343 ACPI_STATUS status; 344 device_t peer; 345 char desc[64]; 346 int ecdt; 347 int ret, rc; 348 struct acpi_ec_params *params; 349 static char *ec_ids[] = { "PNP0C09", NULL }; 350 351 ret = ENXIO; 352 353 /* Check that this is a device and that EC is not disabled. */ 354 if (acpi_get_type(dev) != ACPI_TYPE_DEVICE || acpi_disabled("ec")) 355 return (ret); 356 357 if (device_is_devclass_fixed(dev)) { 358 /* 359 * If probed via ECDT, set description and continue. Otherwise, we can 360 * access the namespace and make sure this is not a duplicate probe. 361 */ 362 ecdt = 1; 363 params = acpi_get_private(dev); 364 if (params != NULL) 365 ret = 0; 366 367 goto out; 368 } else 369 ecdt = 0; 370 371 rc = ACPI_ID_PROBE(device_get_parent(dev), dev, ec_ids, NULL); 372 if (rc > 0) 373 return (rc); 374 375 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO); 376 377 buf.Pointer = NULL; 378 buf.Length = ACPI_ALLOCATE_BUFFER; 379 h = acpi_get_handle(dev); 380 381 /* 382 * Read the unit ID to check for duplicate attach and the global lock value 383 * to see if we should acquire it when accessing the EC. 384 */ 385 status = acpi_GetInteger(h, "_UID", ¶ms->uid); 386 if (ACPI_FAILURE(status)) 387 params->uid = 0; 388 389 /* 390 * Check for a duplicate probe. This can happen when a probe via ECDT 391 * succeeded already. If this is a duplicate, disable this device. 392 * 393 * NB: It would seem device_disable would be sufficient to not get 394 * duplicated devices, and ENXIO isn't needed, however, device_probe() only 395 * checks DF_ENABLED at the start and so disabling it here is too late to 396 * prevent device_attach() from being called. 397 */ 398 peer = devclass_get_device(acpi_ec_devclass, params->uid); 399 if (peer != NULL && device_is_alive(peer)) { 400 device_disable(dev); 401 goto out; 402 } 403 404 status = acpi_GetInteger(h, "_GLK", ¶ms->glk); 405 if (ACPI_FAILURE(status)) 406 params->glk = 0; 407 408 /* 409 * Evaluate the _GPE method to find the GPE bit used by the EC to signal 410 * status (SCI). If it's a package, it contains a reference and GPE bit, 411 * similar to _PRW. 412 */ 413 status = AcpiEvaluateObject(h, "_GPE", NULL, &buf); 414 if (ACPI_FAILURE(status)) { 415 device_printf(dev, "can't evaluate _GPE - %s\n", AcpiFormatException(status)); 416 goto out; 417 } 418 419 obj = (ACPI_OBJECT *)buf.Pointer; 420 if (obj == NULL) 421 goto out; 422 423 switch (obj->Type) { 424 case ACPI_TYPE_INTEGER: 425 params->gpe_handle = NULL; 426 params->gpe_bit = obj->Integer.Value; 427 break; 428 case ACPI_TYPE_PACKAGE: 429 if (!ACPI_PKG_VALID(obj, 2)) 430 goto out; 431 params->gpe_handle = acpi_GetReference(NULL, &obj->Package.Elements[0]); 432 if (params->gpe_handle == NULL || 433 acpi_PkgInt32(obj, 1, ¶ms->gpe_bit) != 0) 434 goto out; 435 break; 436 default: 437 device_printf(dev, "_GPE has invalid type %d\n", obj->Type); 438 goto out; 439 } 440 441 /* Store the values we got from the namespace for attach. */ 442 acpi_set_private(dev, params); 443 444 if (buf.Pointer) 445 AcpiOsFree(buf.Pointer); 446 447 ret = rc; 448 out: 449 if (ret <= 0) { 450 snprintf(desc, sizeof(desc), "Embedded Controller: GPE %#x%s%s", 451 params->gpe_bit, (params->glk) ? ", GLK" : "", 452 ecdt ? ", ECDT" : ""); 453 device_set_desc_copy(dev, desc); 454 } else 455 free(params, M_TEMP); 456 457 return (ret); 458 } 459 460 static int 461 acpi_ec_attach(device_t dev) 462 { 463 struct acpi_ec_softc *sc; 464 struct acpi_ec_params *params; 465 ACPI_STATUS Status; 466 467 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 468 469 /* Fetch/initialize softc (assumes softc is pre-zeroed). */ 470 sc = device_get_softc(dev); 471 params = acpi_get_private(dev); 472 sc->ec_dev = dev; 473 sc->ec_handle = acpi_get_handle(dev); 474 475 /* Retrieve previously probed values via device ivars. */ 476 sc->ec_glk = params->glk; 477 sc->ec_gpebit = params->gpe_bit; 478 sc->ec_gpehandle = params->gpe_handle; 479 sc->ec_uid = params->uid; 480 sc->ec_suspending = FALSE; 481 acpi_set_private(dev, NULL); 482 free(params, M_TEMP); 483 484 /* Attach bus resources for data and command/status ports. */ 485 sc->ec_data_rid = 0; 486 sc->ec_data_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT, 487 &sc->ec_data_rid, RF_ACTIVE); 488 if (sc->ec_data_res == NULL) { 489 device_printf(dev, "can't allocate data port\n"); 490 goto error; 491 } 492 sc->ec_data_tag = rman_get_bustag(sc->ec_data_res); 493 sc->ec_data_handle = rman_get_bushandle(sc->ec_data_res); 494 495 sc->ec_csr_rid = 1; 496 sc->ec_csr_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT, 497 &sc->ec_csr_rid, RF_ACTIVE); 498 if (sc->ec_csr_res == NULL) { 499 device_printf(dev, "can't allocate command/status port\n"); 500 goto error; 501 } 502 sc->ec_csr_tag = rman_get_bustag(sc->ec_csr_res); 503 sc->ec_csr_handle = rman_get_bushandle(sc->ec_csr_res); 504 505 /* 506 * Install a handler for this EC's GPE bit. We want edge-triggered 507 * behavior. 508 */ 509 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching GPE handler\n")); 510 Status = AcpiInstallGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, 511 ACPI_GPE_EDGE_TRIGGERED, EcGpeHandler, sc); 512 if (ACPI_FAILURE(Status)) { 513 device_printf(dev, "can't install GPE handler for %s - %s\n", 514 acpi_name(sc->ec_handle), AcpiFormatException(Status)); 515 goto error; 516 } 517 518 /* 519 * Install address space handler 520 */ 521 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching address space handler\n")); 522 Status = AcpiInstallAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC, 523 &EcSpaceHandler, &EcSpaceSetup, sc); 524 if (ACPI_FAILURE(Status)) { 525 device_printf(dev, "can't install address space handler for %s - %s\n", 526 acpi_name(sc->ec_handle), AcpiFormatException(Status)); 527 goto error; 528 } 529 530 /* Enable runtime GPEs for the handler. */ 531 Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit); 532 if (ACPI_FAILURE(Status)) { 533 device_printf(dev, "AcpiEnableGpe failed: %s\n", 534 AcpiFormatException(Status)); 535 goto error; 536 } 537 538 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "acpi_ec_attach complete\n")); 539 return (0); 540 541 error: 542 AcpiRemoveGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, EcGpeHandler); 543 AcpiRemoveAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC, 544 EcSpaceHandler); 545 if (sc->ec_csr_res) 546 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_csr_rid, 547 sc->ec_csr_res); 548 if (sc->ec_data_res) 549 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_data_rid, 550 sc->ec_data_res); 551 return (ENXIO); 552 } 553 554 static int 555 acpi_ec_suspend(device_t dev) 556 { 557 struct acpi_ec_softc *sc; 558 559 sc = device_get_softc(dev); 560 sc->ec_suspending = TRUE; 561 return (0); 562 } 563 564 static int 565 acpi_ec_resume(device_t dev) 566 { 567 struct acpi_ec_softc *sc; 568 569 sc = device_get_softc(dev); 570 sc->ec_suspending = FALSE; 571 return (0); 572 } 573 574 static int 575 acpi_ec_shutdown(device_t dev) 576 { 577 struct acpi_ec_softc *sc; 578 579 /* Disable the GPE so we don't get EC events during shutdown. */ 580 sc = device_get_softc(dev); 581 AcpiDisableGpe(sc->ec_gpehandle, sc->ec_gpebit); 582 return (0); 583 } 584 585 /* Methods to allow other devices (e.g., smbat) to read/write EC space. */ 586 static int 587 acpi_ec_read_method(device_t dev, u_int addr, UINT64 *val, int width) 588 { 589 struct acpi_ec_softc *sc; 590 ACPI_STATUS status; 591 592 sc = device_get_softc(dev); 593 status = EcSpaceHandler(ACPI_READ, addr, width * 8, val, sc, NULL); 594 if (ACPI_FAILURE(status)) 595 return (ENXIO); 596 return (0); 597 } 598 599 static int 600 acpi_ec_write_method(device_t dev, u_int addr, UINT64 val, int width) 601 { 602 struct acpi_ec_softc *sc; 603 ACPI_STATUS status; 604 605 sc = device_get_softc(dev); 606 status = EcSpaceHandler(ACPI_WRITE, addr, width * 8, &val, sc, NULL); 607 if (ACPI_FAILURE(status)) 608 return (ENXIO); 609 return (0); 610 } 611 612 static ACPI_STATUS 613 EcCheckStatus(struct acpi_ec_softc *sc, const char *msg, EC_EVENT event) 614 { 615 ACPI_STATUS status; 616 EC_STATUS ec_status; 617 618 status = AE_NO_HARDWARE_RESPONSE; 619 ec_status = EC_GET_CSR(sc); 620 if (sc->ec_burstactive && !(ec_status & EC_FLAG_BURST_MODE)) { 621 CTR1(KTR_ACPI, "ec burst disabled in waitevent (%s)", msg); 622 sc->ec_burstactive = FALSE; 623 } 624 if (EVENT_READY(event, ec_status)) { 625 CTR2(KTR_ACPI, "ec %s wait ready, status %#x", msg, ec_status); 626 status = AE_OK; 627 } 628 return (status); 629 } 630 631 static void 632 EcGpeQueryHandlerSub(struct acpi_ec_softc *sc) 633 { 634 UINT8 Data; 635 ACPI_STATUS Status; 636 int retry; 637 char qxx[5]; 638 639 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 640 641 /* Serialize user access with EcSpaceHandler(). */ 642 Status = EcLock(sc); 643 if (ACPI_FAILURE(Status)) { 644 device_printf(sc->ec_dev, "GpeQuery lock error: %s\n", 645 AcpiFormatException(Status)); 646 return; 647 } 648 649 /* 650 * Send a query command to the EC to find out which _Qxx call it 651 * wants to make. This command clears the SCI bit and also the 652 * interrupt source since we are edge-triggered. To prevent the GPE 653 * that may arise from running the query from causing another query 654 * to be queued, we clear the pending flag only after running it. 655 */ 656 for (retry = 0; retry < 2; retry++) { 657 Status = EcCommand(sc, EC_COMMAND_QUERY); 658 if (ACPI_SUCCESS(Status)) 659 break; 660 if (ACPI_FAILURE(EcCheckStatus(sc, "retr_check", 661 EC_EVENT_INPUT_BUFFER_EMPTY))) 662 break; 663 } 664 if (ACPI_FAILURE(Status)) { 665 EcUnlock(sc); 666 device_printf(sc->ec_dev, "GPE query failed: %s\n", 667 AcpiFormatException(Status)); 668 return; 669 } 670 Data = EC_GET_DATA(sc); 671 672 /* 673 * We have to unlock before running the _Qxx method below since that 674 * method may attempt to read/write from EC address space, causing 675 * recursive acquisition of the lock. 676 */ 677 EcUnlock(sc); 678 679 /* Ignore the value for "no outstanding event". (13.3.5) */ 680 CTR2(KTR_ACPI, "ec query ok,%s running _Q%02X", Data ? "" : " not", Data); 681 if (Data == 0) 682 return; 683 684 /* Evaluate _Qxx to respond to the controller. */ 685 snprintf(qxx, sizeof(qxx), "_Q%02X", Data); 686 AcpiUtStrupr(qxx); 687 Status = AcpiEvaluateObject(sc->ec_handle, qxx, NULL, NULL); 688 if (ACPI_FAILURE(Status) && Status != AE_NOT_FOUND) { 689 device_printf(sc->ec_dev, "evaluation of query method %s failed: %s\n", 690 qxx, AcpiFormatException(Status)); 691 } 692 } 693 694 static void 695 EcGpeQueryHandler(void *Context) 696 { 697 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context; 698 int pending; 699 700 KASSERT(Context != NULL, ("EcGpeQueryHandler called with NULL")); 701 702 do { 703 /* Read the current pending count */ 704 pending = atomic_load_acq_int(&sc->ec_sci_pend); 705 706 /* Call GPE handler function */ 707 EcGpeQueryHandlerSub(sc); 708 709 /* 710 * Try to reset the pending count to zero. If this fails we 711 * know another GPE event has occurred while handling the 712 * current GPE event and need to loop. 713 */ 714 } while (!atomic_cmpset_int(&sc->ec_sci_pend, pending, 0)); 715 } 716 717 /* 718 * The GPE handler is called when IBE/OBF or SCI events occur. We are 719 * called from an unknown lock context. 720 */ 721 static UINT32 722 EcGpeHandler(ACPI_HANDLE GpeDevice, UINT32 GpeNumber, void *Context) 723 { 724 struct acpi_ec_softc *sc = Context; 725 ACPI_STATUS Status; 726 EC_STATUS EcStatus; 727 728 KASSERT(Context != NULL, ("EcGpeHandler called with NULL")); 729 CTR0(KTR_ACPI, "ec gpe handler start"); 730 731 /* 732 * Notify EcWaitEvent() that the status register is now fresh. If we 733 * didn't do this, it wouldn't be possible to distinguish an old IBE 734 * from a new one, for example when doing a write transaction (writing 735 * address and then data values.) 736 */ 737 atomic_add_int(&sc->ec_gencount, 1); 738 wakeup(sc); 739 740 /* 741 * If the EC_SCI bit of the status register is set, queue a query handler. 742 * It will run the query and _Qxx method later, under the lock. 743 */ 744 EcStatus = EC_GET_CSR(sc); 745 if ((EcStatus & EC_EVENT_SCI) && 746 atomic_fetchadd_int(&sc->ec_sci_pend, 1) == 0) { 747 CTR0(KTR_ACPI, "ec gpe queueing query handler"); 748 Status = AcpiOsExecute(OSL_GPE_HANDLER, EcGpeQueryHandler, Context); 749 if (ACPI_FAILURE(Status)) { 750 printf("EcGpeHandler: queuing GPE query handler failed\n"); 751 atomic_store_rel_int(&sc->ec_sci_pend, 0); 752 } 753 } 754 return (ACPI_REENABLE_GPE); 755 } 756 757 static ACPI_STATUS 758 EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, void *Context, 759 void **RegionContext) 760 { 761 762 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 763 764 /* 765 * If deactivating a region, always set the output to NULL. Otherwise, 766 * just pass the context through. 767 */ 768 if (Function == ACPI_REGION_DEACTIVATE) 769 *RegionContext = NULL; 770 else 771 *RegionContext = Context; 772 773 return_ACPI_STATUS (AE_OK); 774 } 775 776 static ACPI_STATUS 777 EcSpaceHandler(UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 Width, 778 UINT64 *Value, void *Context, void *RegionContext) 779 { 780 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context; 781 ACPI_PHYSICAL_ADDRESS EcAddr; 782 UINT8 *EcData; 783 ACPI_STATUS Status; 784 785 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, (UINT32)Address); 786 787 if (Function != ACPI_READ && Function != ACPI_WRITE) 788 return_ACPI_STATUS (AE_BAD_PARAMETER); 789 if (Width % 8 != 0 || Value == NULL || Context == NULL) 790 return_ACPI_STATUS (AE_BAD_PARAMETER); 791 if (Address + Width / 8 > 256) 792 return_ACPI_STATUS (AE_BAD_ADDRESS); 793 794 /* 795 * If booting, check if we need to run the query handler. If so, we 796 * we call it directly here since our thread taskq is not active yet. 797 */ 798 if (cold || rebooting || sc->ec_suspending) { 799 if ((EC_GET_CSR(sc) & EC_EVENT_SCI) && 800 atomic_fetchadd_int(&sc->ec_sci_pend, 1) == 0) { 801 CTR0(KTR_ACPI, "ec running gpe handler directly"); 802 EcGpeQueryHandler(sc); 803 } 804 } 805 806 /* Serialize with EcGpeQueryHandler() at transaction granularity. */ 807 Status = EcLock(sc); 808 if (ACPI_FAILURE(Status)) 809 return_ACPI_STATUS (Status); 810 811 /* If we can't start burst mode, continue anyway. */ 812 Status = EcCommand(sc, EC_COMMAND_BURST_ENABLE); 813 if (ACPI_SUCCESS(Status)) { 814 if (EC_GET_DATA(sc) == EC_BURST_ACK) { 815 CTR0(KTR_ACPI, "ec burst enabled"); 816 sc->ec_burstactive = TRUE; 817 } 818 } 819 820 /* Perform the transaction(s), based on Width. */ 821 EcAddr = Address; 822 EcData = (UINT8 *)Value; 823 if (Function == ACPI_READ) 824 *Value = 0; 825 do { 826 switch (Function) { 827 case ACPI_READ: 828 Status = EcRead(sc, EcAddr, EcData); 829 break; 830 case ACPI_WRITE: 831 Status = EcWrite(sc, EcAddr, *EcData); 832 break; 833 } 834 if (ACPI_FAILURE(Status)) 835 break; 836 EcAddr++; 837 EcData++; 838 } while (EcAddr < Address + Width / 8); 839 840 if (sc->ec_burstactive) { 841 sc->ec_burstactive = FALSE; 842 if (ACPI_SUCCESS(EcCommand(sc, EC_COMMAND_BURST_DISABLE))) 843 CTR0(KTR_ACPI, "ec disabled burst ok"); 844 } 845 846 EcUnlock(sc); 847 return_ACPI_STATUS (Status); 848 } 849 850 static ACPI_STATUS 851 EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, u_int gen_count) 852 { 853 static int no_intr = 0; 854 ACPI_STATUS Status; 855 int count, i, need_poll, slp_ival; 856 857 ACPI_SERIAL_ASSERT(ec); 858 Status = AE_NO_HARDWARE_RESPONSE; 859 need_poll = cold || rebooting || ec_polled_mode || sc->ec_suspending; 860 861 /* Wait for event by polling or GPE (interrupt). */ 862 if (need_poll) { 863 count = (ec_timeout * 1000) / EC_POLL_DELAY; 864 if (count == 0) 865 count = 1; 866 DELAY(10); 867 for (i = 0; i < count; i++) { 868 Status = EcCheckStatus(sc, "poll", Event); 869 if (ACPI_SUCCESS(Status)) 870 break; 871 DELAY(EC_POLL_DELAY); 872 } 873 } else { 874 slp_ival = hz / 1000; 875 if (slp_ival != 0) { 876 count = ec_timeout; 877 } else { 878 /* hz has less than 1 ms resolution so scale timeout. */ 879 slp_ival = 1; 880 count = ec_timeout / (1000 / hz); 881 } 882 883 /* 884 * Wait for the GPE to signal the status changed, checking the 885 * status register each time we get one. It's possible to get a 886 * GPE for an event we're not interested in here (i.e., SCI for 887 * EC query). 888 */ 889 for (i = 0; i < count; i++) { 890 if (gen_count == sc->ec_gencount) 891 tsleep(sc, 0, "ecgpe", slp_ival); 892 /* 893 * Record new generation count. It's possible the GPE was 894 * just to notify us that a query is needed and we need to 895 * wait for a second GPE to signal the completion of the 896 * event we are actually waiting for. 897 */ 898 Status = EcCheckStatus(sc, "sleep", Event); 899 if (ACPI_SUCCESS(Status)) { 900 if (gen_count == sc->ec_gencount) 901 no_intr++; 902 else 903 no_intr = 0; 904 break; 905 } 906 gen_count = sc->ec_gencount; 907 } 908 909 /* 910 * We finished waiting for the GPE and it never arrived. Try to 911 * read the register once and trust whatever value we got. This is 912 * the best we can do at this point. 913 */ 914 if (ACPI_FAILURE(Status)) 915 Status = EcCheckStatus(sc, "sleep_end", Event); 916 } 917 if (!need_poll && no_intr > 10) { 918 device_printf(sc->ec_dev, 919 "not getting interrupts, switched to polled mode\n"); 920 ec_polled_mode = 1; 921 } 922 if (ACPI_FAILURE(Status)) 923 CTR0(KTR_ACPI, "error: ec wait timed out"); 924 return (Status); 925 } 926 927 static ACPI_STATUS 928 EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd) 929 { 930 ACPI_STATUS status; 931 EC_EVENT event; 932 EC_STATUS ec_status; 933 u_int gen_count; 934 935 ACPI_SERIAL_ASSERT(ec); 936 937 /* Don't use burst mode if user disabled it. */ 938 if (!ec_burst_mode && cmd == EC_COMMAND_BURST_ENABLE) 939 return (AE_ERROR); 940 941 /* Decide what to wait for based on command type. */ 942 switch (cmd) { 943 case EC_COMMAND_READ: 944 case EC_COMMAND_WRITE: 945 case EC_COMMAND_BURST_DISABLE: 946 event = EC_EVENT_INPUT_BUFFER_EMPTY; 947 break; 948 case EC_COMMAND_QUERY: 949 case EC_COMMAND_BURST_ENABLE: 950 event = EC_EVENT_OUTPUT_BUFFER_FULL; 951 break; 952 default: 953 device_printf(sc->ec_dev, "EcCommand: invalid command %#x\n", cmd); 954 return (AE_BAD_PARAMETER); 955 } 956 957 /* 958 * Ensure empty input buffer before issuing command. 959 * Use generation count of zero to force a quick check. 960 */ 961 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, 0); 962 if (ACPI_FAILURE(status)) 963 return (status); 964 965 /* Run the command and wait for the chosen event. */ 966 CTR1(KTR_ACPI, "ec running command %#x", cmd); 967 gen_count = sc->ec_gencount; 968 EC_SET_CSR(sc, cmd); 969 status = EcWaitEvent(sc, event, gen_count); 970 if (ACPI_SUCCESS(status)) { 971 /* If we succeeded, burst flag should now be present. */ 972 if (cmd == EC_COMMAND_BURST_ENABLE) { 973 ec_status = EC_GET_CSR(sc); 974 if ((ec_status & EC_FLAG_BURST_MODE) == 0) 975 status = AE_ERROR; 976 } 977 } else 978 device_printf(sc->ec_dev, "EcCommand: no response to %#x\n", cmd); 979 return (status); 980 } 981 982 static ACPI_STATUS 983 EcRead(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data) 984 { 985 ACPI_STATUS status; 986 u_int gen_count; 987 int retry; 988 989 ACPI_SERIAL_ASSERT(ec); 990 CTR1(KTR_ACPI, "ec read from %#x", Address); 991 992 for (retry = 0; retry < 2; retry++) { 993 status = EcCommand(sc, EC_COMMAND_READ); 994 if (ACPI_FAILURE(status)) 995 return (status); 996 997 gen_count = sc->ec_gencount; 998 EC_SET_DATA(sc, Address); 999 status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL, gen_count); 1000 if (ACPI_SUCCESS(status)) { 1001 *Data = EC_GET_DATA(sc); 1002 return (AE_OK); 1003 } 1004 if (ACPI_FAILURE(EcCheckStatus(sc, "retr_check", 1005 EC_EVENT_INPUT_BUFFER_EMPTY))) 1006 break; 1007 } 1008 device_printf(sc->ec_dev, "EcRead: failed waiting to get data\n"); 1009 return (status); 1010 } 1011 1012 static ACPI_STATUS 1013 EcWrite(struct acpi_ec_softc *sc, UINT8 Address, UINT8 Data) 1014 { 1015 ACPI_STATUS status; 1016 u_int gen_count; 1017 1018 ACPI_SERIAL_ASSERT(ec); 1019 CTR2(KTR_ACPI, "ec write to %#x, data %#x", Address, Data); 1020 1021 status = EcCommand(sc, EC_COMMAND_WRITE); 1022 if (ACPI_FAILURE(status)) 1023 return (status); 1024 1025 gen_count = sc->ec_gencount; 1026 EC_SET_DATA(sc, Address); 1027 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count); 1028 if (ACPI_FAILURE(status)) { 1029 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent address\n"); 1030 return (status); 1031 } 1032 1033 gen_count = sc->ec_gencount; 1034 EC_SET_DATA(sc, Data); 1035 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count); 1036 if (ACPI_FAILURE(status)) { 1037 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent data\n"); 1038 return (status); 1039 } 1040 1041 return (AE_OK); 1042 } 1043