1 /*- 2 * Copyright (c) 2003-2007 Nate Lawson 3 * Copyright (c) 2000 Michael Smith 4 * Copyright (c) 2000 BSDi 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include "opt_acpi.h" 33 #include <sys/param.h> 34 #include <sys/kernel.h> 35 #include <sys/bus.h> 36 #include <sys/lock.h> 37 #include <sys/malloc.h> 38 #include <sys/module.h> 39 #include <sys/sx.h> 40 41 #include <machine/bus.h> 42 #include <machine/resource.h> 43 #include <sys/rman.h> 44 45 #include <contrib/dev/acpica/include/acpi.h> 46 #include <contrib/dev/acpica/include/accommon.h> 47 48 #include <dev/acpica/acpivar.h> 49 50 /* Hooks for the ACPI CA debugging infrastructure */ 51 #define _COMPONENT ACPI_EC 52 ACPI_MODULE_NAME("EC") 53 54 /* 55 * EC_COMMAND: 56 * ----------- 57 */ 58 typedef UINT8 EC_COMMAND; 59 60 #define EC_COMMAND_UNKNOWN ((EC_COMMAND) 0x00) 61 #define EC_COMMAND_READ ((EC_COMMAND) 0x80) 62 #define EC_COMMAND_WRITE ((EC_COMMAND) 0x81) 63 #define EC_COMMAND_BURST_ENABLE ((EC_COMMAND) 0x82) 64 #define EC_COMMAND_BURST_DISABLE ((EC_COMMAND) 0x83) 65 #define EC_COMMAND_QUERY ((EC_COMMAND) 0x84) 66 67 /* 68 * EC_STATUS: 69 * ---------- 70 * The encoding of the EC status register is illustrated below. 71 * Note that a set bit (1) indicates the property is TRUE 72 * (e.g. if bit 0 is set then the output buffer is full). 73 * +-+-+-+-+-+-+-+-+ 74 * |7|6|5|4|3|2|1|0| 75 * +-+-+-+-+-+-+-+-+ 76 * | | | | | | | | 77 * | | | | | | | +- Output Buffer Full? 78 * | | | | | | +--- Input Buffer Full? 79 * | | | | | +----- <reserved> 80 * | | | | +------- Data Register is Command Byte? 81 * | | | +--------- Burst Mode Enabled? 82 * | | +----------- SCI Event? 83 * | +------------- SMI Event? 84 * +--------------- <reserved> 85 * 86 */ 87 typedef UINT8 EC_STATUS; 88 89 #define EC_FLAG_OUTPUT_BUFFER ((EC_STATUS) 0x01) 90 #define EC_FLAG_INPUT_BUFFER ((EC_STATUS) 0x02) 91 #define EC_FLAG_DATA_IS_CMD ((EC_STATUS) 0x08) 92 #define EC_FLAG_BURST_MODE ((EC_STATUS) 0x10) 93 94 /* 95 * EC_EVENT: 96 * --------- 97 */ 98 typedef UINT8 EC_EVENT; 99 100 #define EC_EVENT_UNKNOWN ((EC_EVENT) 0x00) 101 #define EC_EVENT_OUTPUT_BUFFER_FULL ((EC_EVENT) 0x01) 102 #define EC_EVENT_INPUT_BUFFER_EMPTY ((EC_EVENT) 0x02) 103 #define EC_EVENT_SCI ((EC_EVENT) 0x20) 104 #define EC_EVENT_SMI ((EC_EVENT) 0x40) 105 106 /* Data byte returned after burst enable indicating it was successful. */ 107 #define EC_BURST_ACK 0x90 108 109 /* 110 * Register access primitives 111 */ 112 #define EC_GET_DATA(sc) \ 113 bus_space_read_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0) 114 115 #define EC_SET_DATA(sc, v) \ 116 bus_space_write_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0, (v)) 117 118 #define EC_GET_CSR(sc) \ 119 bus_space_read_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0) 120 121 #define EC_SET_CSR(sc, v) \ 122 bus_space_write_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0, (v)) 123 124 /* Additional params to pass from the probe routine */ 125 struct acpi_ec_params { 126 int glk; 127 int gpe_bit; 128 ACPI_HANDLE gpe_handle; 129 int uid; 130 }; 131 132 /* 133 * Driver softc. 134 */ 135 struct acpi_ec_softc { 136 device_t ec_dev; 137 ACPI_HANDLE ec_handle; 138 int ec_uid; 139 ACPI_HANDLE ec_gpehandle; 140 UINT8 ec_gpebit; 141 142 int ec_data_rid; 143 struct resource *ec_data_res; 144 bus_space_tag_t ec_data_tag; 145 bus_space_handle_t ec_data_handle; 146 147 int ec_csr_rid; 148 struct resource *ec_csr_res; 149 bus_space_tag_t ec_csr_tag; 150 bus_space_handle_t ec_csr_handle; 151 152 int ec_glk; 153 int ec_glkhandle; 154 int ec_burstactive; 155 int ec_sci_pend; 156 volatile u_int ec_gencount; 157 int ec_suspending; 158 }; 159 160 /* 161 * XXX njl 162 * I couldn't find it in the spec but other implementations also use a 163 * value of 1 ms for the time to acquire global lock. 164 */ 165 #define EC_LOCK_TIMEOUT 1000 166 167 /* Default delay in microseconds between each run of the status polling loop. */ 168 #define EC_POLL_DELAY 50 169 170 /* Total time in ms spent waiting for a response from EC. */ 171 #define EC_TIMEOUT 750 172 173 #define EVENT_READY(event, status) \ 174 (((event) == EC_EVENT_OUTPUT_BUFFER_FULL && \ 175 ((status) & EC_FLAG_OUTPUT_BUFFER) != 0) || \ 176 ((event) == EC_EVENT_INPUT_BUFFER_EMPTY && \ 177 ((status) & EC_FLAG_INPUT_BUFFER) == 0)) 178 179 ACPI_SERIAL_DECL(ec, "ACPI embedded controller"); 180 181 SYSCTL_DECL(_debug_acpi); 182 SYSCTL_NODE(_debug_acpi, OID_AUTO, ec, CTLFLAG_RD, NULL, "EC debugging"); 183 184 static int ec_burst_mode; 185 TUNABLE_INT("debug.acpi.ec.burst", &ec_burst_mode); 186 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, burst, CTLFLAG_RW, &ec_burst_mode, 0, 187 "Enable use of burst mode (faster for nearly all systems)"); 188 static int ec_polled_mode; 189 TUNABLE_INT("debug.acpi.ec.polled", &ec_polled_mode); 190 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, polled, CTLFLAG_RW, &ec_polled_mode, 0, 191 "Force use of polled mode (only if interrupt mode doesn't work)"); 192 static int ec_timeout = EC_TIMEOUT; 193 TUNABLE_INT("debug.acpi.ec.timeout", &ec_timeout); 194 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout, CTLFLAG_RW, &ec_timeout, 195 EC_TIMEOUT, "Total time spent waiting for a response (poll+sleep)"); 196 197 static ACPI_STATUS 198 EcLock(struct acpi_ec_softc *sc) 199 { 200 ACPI_STATUS status; 201 202 /* If _GLK is non-zero, acquire the global lock. */ 203 status = AE_OK; 204 if (sc->ec_glk) { 205 status = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->ec_glkhandle); 206 if (ACPI_FAILURE(status)) 207 return (status); 208 } 209 ACPI_SERIAL_BEGIN(ec); 210 return (status); 211 } 212 213 static void 214 EcUnlock(struct acpi_ec_softc *sc) 215 { 216 ACPI_SERIAL_END(ec); 217 if (sc->ec_glk) 218 AcpiReleaseGlobalLock(sc->ec_glkhandle); 219 } 220 221 static uint32_t EcGpeHandler(void *Context); 222 static ACPI_STATUS EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, 223 void *Context, void **return_Context); 224 static ACPI_STATUS EcSpaceHandler(UINT32 Function, 225 ACPI_PHYSICAL_ADDRESS Address, 226 UINT32 Width, UINT64 *Value, 227 void *Context, void *RegionContext); 228 static ACPI_STATUS EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, 229 u_int gen_count); 230 static ACPI_STATUS EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd); 231 static ACPI_STATUS EcRead(struct acpi_ec_softc *sc, UINT8 Address, 232 UINT8 *Data); 233 static ACPI_STATUS EcWrite(struct acpi_ec_softc *sc, UINT8 Address, 234 UINT8 Data); 235 static int acpi_ec_probe(device_t dev); 236 static int acpi_ec_attach(device_t dev); 237 static int acpi_ec_suspend(device_t dev); 238 static int acpi_ec_resume(device_t dev); 239 static int acpi_ec_shutdown(device_t dev); 240 static int acpi_ec_read_method(device_t dev, u_int addr, 241 UINT64 *val, int width); 242 static int acpi_ec_write_method(device_t dev, u_int addr, 243 UINT64 val, int width); 244 245 static device_method_t acpi_ec_methods[] = { 246 /* Device interface */ 247 DEVMETHOD(device_probe, acpi_ec_probe), 248 DEVMETHOD(device_attach, acpi_ec_attach), 249 DEVMETHOD(device_suspend, acpi_ec_suspend), 250 DEVMETHOD(device_resume, acpi_ec_resume), 251 DEVMETHOD(device_shutdown, acpi_ec_shutdown), 252 253 /* Embedded controller interface */ 254 DEVMETHOD(acpi_ec_read, acpi_ec_read_method), 255 DEVMETHOD(acpi_ec_write, acpi_ec_write_method), 256 257 {0, 0} 258 }; 259 260 static driver_t acpi_ec_driver = { 261 "acpi_ec", 262 acpi_ec_methods, 263 sizeof(struct acpi_ec_softc), 264 }; 265 266 static devclass_t acpi_ec_devclass; 267 DRIVER_MODULE(acpi_ec, acpi, acpi_ec_driver, acpi_ec_devclass, 0, 0); 268 MODULE_DEPEND(acpi_ec, acpi, 1, 1, 1); 269 270 /* 271 * Look for an ECDT and if we find one, set up default GPE and 272 * space handlers to catch attempts to access EC space before 273 * we have a real driver instance in place. 274 * 275 * TODO: Some old Gateway laptops need us to fake up an ECDT or 276 * otherwise attach early so that _REG methods can run. 277 */ 278 void 279 acpi_ec_ecdt_probe(device_t parent) 280 { 281 ACPI_TABLE_ECDT *ecdt; 282 ACPI_STATUS status; 283 device_t child; 284 ACPI_HANDLE h; 285 struct acpi_ec_params *params; 286 287 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 288 289 /* Find and validate the ECDT. */ 290 status = AcpiGetTable(ACPI_SIG_ECDT, 1, (ACPI_TABLE_HEADER **)&ecdt); 291 if (ACPI_FAILURE(status) || 292 ecdt->Control.BitWidth != 8 || 293 ecdt->Data.BitWidth != 8) { 294 return; 295 } 296 297 /* Create the child device with the given unit number. */ 298 child = BUS_ADD_CHILD(parent, 0, "acpi_ec", ecdt->Uid); 299 if (child == NULL) { 300 printf("%s: can't add child\n", __func__); 301 return; 302 } 303 304 /* Find and save the ACPI handle for this device. */ 305 status = AcpiGetHandle(NULL, ecdt->Id, &h); 306 if (ACPI_FAILURE(status)) { 307 device_delete_child(parent, child); 308 printf("%s: can't get handle\n", __func__); 309 return; 310 } 311 acpi_set_handle(child, h); 312 313 /* Set the data and CSR register addresses. */ 314 bus_set_resource(child, SYS_RES_IOPORT, 0, ecdt->Data.Address, 315 /*count*/1); 316 bus_set_resource(child, SYS_RES_IOPORT, 1, ecdt->Control.Address, 317 /*count*/1); 318 319 /* 320 * Store values for the probe/attach routines to use. Store the 321 * ECDT GPE bit and set the global lock flag according to _GLK. 322 * Note that it is not perfectly correct to be evaluating a method 323 * before initializing devices, but in practice this function 324 * should be safe to call at this point. 325 */ 326 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO); 327 params->gpe_handle = NULL; 328 params->gpe_bit = ecdt->Gpe; 329 params->uid = ecdt->Uid; 330 acpi_GetInteger(h, "_GLK", ¶ms->glk); 331 acpi_set_private(child, params); 332 333 /* Finish the attach process. */ 334 if (device_probe_and_attach(child) != 0) 335 device_delete_child(parent, child); 336 } 337 338 static int 339 acpi_ec_probe(device_t dev) 340 { 341 ACPI_BUFFER buf; 342 ACPI_HANDLE h; 343 ACPI_OBJECT *obj; 344 ACPI_STATUS status; 345 device_t peer; 346 char desc[64]; 347 int ecdt; 348 int ret; 349 struct acpi_ec_params *params; 350 static char *ec_ids[] = { "PNP0C09", NULL }; 351 352 /* Check that this is a device and that EC is not disabled. */ 353 if (acpi_get_type(dev) != ACPI_TYPE_DEVICE || acpi_disabled("ec")) 354 return (ENXIO); 355 356 /* 357 * If probed via ECDT, set description and continue. Otherwise, 358 * we can access the namespace and make sure this is not a 359 * duplicate probe. 360 */ 361 ret = ENXIO; 362 ecdt = 0; 363 buf.Pointer = NULL; 364 buf.Length = ACPI_ALLOCATE_BUFFER; 365 params = acpi_get_private(dev); 366 if (params != NULL) { 367 ecdt = 1; 368 ret = 0; 369 } else if (ACPI_ID_PROBE(device_get_parent(dev), dev, ec_ids)) { 370 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, 371 M_WAITOK | M_ZERO); 372 h = acpi_get_handle(dev); 373 374 /* 375 * Read the unit ID to check for duplicate attach and the 376 * global lock value to see if we should acquire it when 377 * accessing the EC. 378 */ 379 status = acpi_GetInteger(h, "_UID", ¶ms->uid); 380 if (ACPI_FAILURE(status)) 381 params->uid = 0; 382 status = acpi_GetInteger(h, "_GLK", ¶ms->glk); 383 if (ACPI_FAILURE(status)) 384 params->glk = 0; 385 386 /* 387 * Evaluate the _GPE method to find the GPE bit used by the EC to 388 * signal status (SCI). If it's a package, it contains a reference 389 * and GPE bit, similar to _PRW. 390 */ 391 status = AcpiEvaluateObject(h, "_GPE", NULL, &buf); 392 if (ACPI_FAILURE(status)) { 393 device_printf(dev, "can't evaluate _GPE - %s\n", 394 AcpiFormatException(status)); 395 goto out; 396 } 397 obj = (ACPI_OBJECT *)buf.Pointer; 398 if (obj == NULL) 399 goto out; 400 401 switch (obj->Type) { 402 case ACPI_TYPE_INTEGER: 403 params->gpe_handle = NULL; 404 params->gpe_bit = obj->Integer.Value; 405 break; 406 case ACPI_TYPE_PACKAGE: 407 if (!ACPI_PKG_VALID(obj, 2)) 408 goto out; 409 params->gpe_handle = 410 acpi_GetReference(NULL, &obj->Package.Elements[0]); 411 if (params->gpe_handle == NULL || 412 acpi_PkgInt32(obj, 1, ¶ms->gpe_bit) != 0) 413 goto out; 414 break; 415 default: 416 device_printf(dev, "_GPE has invalid type %d\n", obj->Type); 417 goto out; 418 } 419 420 /* Store the values we got from the namespace for attach. */ 421 acpi_set_private(dev, params); 422 423 /* 424 * Check for a duplicate probe. This can happen when a probe 425 * via ECDT succeeded already. If this is a duplicate, disable 426 * this device. 427 */ 428 peer = devclass_get_device(acpi_ec_devclass, params->uid); 429 if (peer == NULL || !device_is_alive(peer)) 430 ret = 0; 431 else 432 device_disable(dev); 433 } 434 435 out: 436 if (ret == 0) { 437 snprintf(desc, sizeof(desc), "Embedded Controller: GPE %#x%s%s", 438 params->gpe_bit, (params->glk) ? ", GLK" : "", 439 ecdt ? ", ECDT" : ""); 440 device_set_desc_copy(dev, desc); 441 } 442 443 if (ret > 0 && params) 444 free(params, M_TEMP); 445 if (buf.Pointer) 446 AcpiOsFree(buf.Pointer); 447 return (ret); 448 } 449 450 static int 451 acpi_ec_attach(device_t dev) 452 { 453 struct acpi_ec_softc *sc; 454 struct acpi_ec_params *params; 455 ACPI_STATUS Status; 456 457 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 458 459 /* Fetch/initialize softc (assumes softc is pre-zeroed). */ 460 sc = device_get_softc(dev); 461 params = acpi_get_private(dev); 462 sc->ec_dev = dev; 463 sc->ec_handle = acpi_get_handle(dev); 464 465 /* Retrieve previously probed values via device ivars. */ 466 sc->ec_glk = params->glk; 467 sc->ec_gpebit = params->gpe_bit; 468 sc->ec_gpehandle = params->gpe_handle; 469 sc->ec_uid = params->uid; 470 sc->ec_suspending = FALSE; 471 acpi_set_private(dev, NULL); 472 free(params, M_TEMP); 473 474 /* Attach bus resources for data and command/status ports. */ 475 sc->ec_data_rid = 0; 476 sc->ec_data_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT, 477 &sc->ec_data_rid, RF_ACTIVE); 478 if (sc->ec_data_res == NULL) { 479 device_printf(dev, "can't allocate data port\n"); 480 goto error; 481 } 482 sc->ec_data_tag = rman_get_bustag(sc->ec_data_res); 483 sc->ec_data_handle = rman_get_bushandle(sc->ec_data_res); 484 485 sc->ec_csr_rid = 1; 486 sc->ec_csr_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT, 487 &sc->ec_csr_rid, RF_ACTIVE); 488 if (sc->ec_csr_res == NULL) { 489 device_printf(dev, "can't allocate command/status port\n"); 490 goto error; 491 } 492 sc->ec_csr_tag = rman_get_bustag(sc->ec_csr_res); 493 sc->ec_csr_handle = rman_get_bushandle(sc->ec_csr_res); 494 495 /* 496 * Install a handler for this EC's GPE bit. We want edge-triggered 497 * behavior. 498 */ 499 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching GPE handler\n")); 500 Status = AcpiInstallGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, 501 ACPI_GPE_EDGE_TRIGGERED, &EcGpeHandler, sc); 502 if (ACPI_FAILURE(Status)) { 503 device_printf(dev, "can't install GPE handler for %s - %s\n", 504 acpi_name(sc->ec_handle), AcpiFormatException(Status)); 505 goto error; 506 } 507 508 /* 509 * Install address space handler 510 */ 511 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching address space handler\n")); 512 Status = AcpiInstallAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC, 513 &EcSpaceHandler, &EcSpaceSetup, sc); 514 if (ACPI_FAILURE(Status)) { 515 device_printf(dev, "can't install address space handler for %s - %s\n", 516 acpi_name(sc->ec_handle), AcpiFormatException(Status)); 517 goto error; 518 } 519 520 /* Enable runtime GPEs for the handler. */ 521 Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit); 522 if (ACPI_FAILURE(Status)) { 523 device_printf(dev, "AcpiEnableGpe failed: %s\n", 524 AcpiFormatException(Status)); 525 goto error; 526 } 527 528 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "acpi_ec_attach complete\n")); 529 return (0); 530 531 error: 532 AcpiRemoveGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, &EcGpeHandler); 533 AcpiRemoveAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC, 534 EcSpaceHandler); 535 if (sc->ec_csr_res) 536 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_csr_rid, 537 sc->ec_csr_res); 538 if (sc->ec_data_res) 539 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_data_rid, 540 sc->ec_data_res); 541 return (ENXIO); 542 } 543 544 static int 545 acpi_ec_suspend(device_t dev) 546 { 547 struct acpi_ec_softc *sc; 548 549 sc = device_get_softc(dev); 550 sc->ec_suspending = TRUE; 551 return (0); 552 } 553 554 static int 555 acpi_ec_resume(device_t dev) 556 { 557 struct acpi_ec_softc *sc; 558 559 sc = device_get_softc(dev); 560 sc->ec_suspending = FALSE; 561 return (0); 562 } 563 564 static int 565 acpi_ec_shutdown(device_t dev) 566 { 567 struct acpi_ec_softc *sc; 568 569 /* Disable the GPE so we don't get EC events during shutdown. */ 570 sc = device_get_softc(dev); 571 AcpiDisableGpe(sc->ec_gpehandle, sc->ec_gpebit); 572 return (0); 573 } 574 575 /* Methods to allow other devices (e.g., smbat) to read/write EC space. */ 576 static int 577 acpi_ec_read_method(device_t dev, u_int addr, UINT64 *val, int width) 578 { 579 struct acpi_ec_softc *sc; 580 ACPI_STATUS status; 581 582 sc = device_get_softc(dev); 583 status = EcSpaceHandler(ACPI_READ, addr, width * 8, val, sc, NULL); 584 if (ACPI_FAILURE(status)) 585 return (ENXIO); 586 return (0); 587 } 588 589 static int 590 acpi_ec_write_method(device_t dev, u_int addr, UINT64 val, int width) 591 { 592 struct acpi_ec_softc *sc; 593 ACPI_STATUS status; 594 595 sc = device_get_softc(dev); 596 status = EcSpaceHandler(ACPI_WRITE, addr, width * 8, &val, sc, NULL); 597 if (ACPI_FAILURE(status)) 598 return (ENXIO); 599 return (0); 600 } 601 602 static ACPI_STATUS 603 EcCheckStatus(struct acpi_ec_softc *sc, const char *msg, EC_EVENT event) 604 { 605 ACPI_STATUS status; 606 EC_STATUS ec_status; 607 608 status = AE_NO_HARDWARE_RESPONSE; 609 ec_status = EC_GET_CSR(sc); 610 if (sc->ec_burstactive && !(ec_status & EC_FLAG_BURST_MODE)) { 611 CTR1(KTR_ACPI, "ec burst disabled in waitevent (%s)", msg); 612 sc->ec_burstactive = FALSE; 613 } 614 if (EVENT_READY(event, ec_status)) { 615 CTR2(KTR_ACPI, "ec %s wait ready, status %#x", msg, ec_status); 616 status = AE_OK; 617 } 618 return (status); 619 } 620 621 static void 622 EcGpeQueryHandler(void *Context) 623 { 624 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context; 625 UINT8 Data; 626 ACPI_STATUS Status; 627 int retry; 628 char qxx[5]; 629 630 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 631 KASSERT(Context != NULL, ("EcGpeQueryHandler called with NULL")); 632 633 /* Serialize user access with EcSpaceHandler(). */ 634 Status = EcLock(sc); 635 if (ACPI_FAILURE(Status)) { 636 device_printf(sc->ec_dev, "GpeQuery lock error: %s\n", 637 AcpiFormatException(Status)); 638 return; 639 } 640 641 /* 642 * Send a query command to the EC to find out which _Qxx call it 643 * wants to make. This command clears the SCI bit and also the 644 * interrupt source since we are edge-triggered. To prevent the GPE 645 * that may arise from running the query from causing another query 646 * to be queued, we clear the pending flag only after running it. 647 */ 648 for (retry = 0; retry < 2; retry++) { 649 Status = EcCommand(sc, EC_COMMAND_QUERY); 650 if (ACPI_SUCCESS(Status)) 651 break; 652 if (EcCheckStatus(sc, "retr_check", 653 EC_EVENT_INPUT_BUFFER_EMPTY) == AE_OK) 654 continue; 655 else 656 break; 657 } 658 sc->ec_sci_pend = FALSE; 659 if (ACPI_FAILURE(Status)) { 660 EcUnlock(sc); 661 device_printf(sc->ec_dev, "GPE query failed: %s\n", 662 AcpiFormatException(Status)); 663 return; 664 } 665 Data = EC_GET_DATA(sc); 666 667 /* 668 * We have to unlock before running the _Qxx method below since that 669 * method may attempt to read/write from EC address space, causing 670 * recursive acquisition of the lock. 671 */ 672 EcUnlock(sc); 673 674 /* Ignore the value for "no outstanding event". (13.3.5) */ 675 CTR2(KTR_ACPI, "ec query ok,%s running _Q%02X", Data ? "" : " not", Data); 676 if (Data == 0) 677 return; 678 679 /* Evaluate _Qxx to respond to the controller. */ 680 snprintf(qxx, sizeof(qxx), "_Q%02X", Data); 681 AcpiUtStrupr(qxx); 682 Status = AcpiEvaluateObject(sc->ec_handle, qxx, NULL, NULL); 683 if (ACPI_FAILURE(Status) && Status != AE_NOT_FOUND) { 684 device_printf(sc->ec_dev, "evaluation of query method %s failed: %s\n", 685 qxx, AcpiFormatException(Status)); 686 } 687 } 688 689 /* 690 * The GPE handler is called when IBE/OBF or SCI events occur. We are 691 * called from an unknown lock context. 692 */ 693 static uint32_t 694 EcGpeHandler(void *Context) 695 { 696 struct acpi_ec_softc *sc = Context; 697 ACPI_STATUS Status; 698 EC_STATUS EcStatus; 699 700 KASSERT(Context != NULL, ("EcGpeHandler called with NULL")); 701 CTR0(KTR_ACPI, "ec gpe handler start"); 702 703 /* 704 * Notify EcWaitEvent() that the status register is now fresh. If we 705 * didn't do this, it wouldn't be possible to distinguish an old IBE 706 * from a new one, for example when doing a write transaction (writing 707 * address and then data values.) 708 */ 709 atomic_add_int(&sc->ec_gencount, 1); 710 wakeup(&sc); 711 712 /* 713 * If the EC_SCI bit of the status register is set, queue a query handler. 714 * It will run the query and _Qxx method later, under the lock. 715 */ 716 EcStatus = EC_GET_CSR(sc); 717 if ((EcStatus & EC_EVENT_SCI) && !sc->ec_sci_pend) { 718 CTR0(KTR_ACPI, "ec gpe queueing query handler"); 719 Status = AcpiOsExecute(OSL_GPE_HANDLER, EcGpeQueryHandler, Context); 720 if (ACPI_SUCCESS(Status)) 721 sc->ec_sci_pend = TRUE; 722 else 723 printf("EcGpeHandler: queuing GPE query handler failed\n"); 724 } 725 return (0); 726 } 727 728 static ACPI_STATUS 729 EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, void *Context, 730 void **RegionContext) 731 { 732 733 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 734 735 /* 736 * If deactivating a region, always set the output to NULL. Otherwise, 737 * just pass the context through. 738 */ 739 if (Function == ACPI_REGION_DEACTIVATE) 740 *RegionContext = NULL; 741 else 742 *RegionContext = Context; 743 744 return_ACPI_STATUS (AE_OK); 745 } 746 747 static ACPI_STATUS 748 EcSpaceHandler(UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 Width, 749 UINT64 *Value, void *Context, void *RegionContext) 750 { 751 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context; 752 ACPI_PHYSICAL_ADDRESS EcAddr; 753 UINT8 *EcData; 754 ACPI_STATUS Status; 755 756 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, (UINT32)Address); 757 758 if (Function != ACPI_READ && Function != ACPI_WRITE) 759 return_ACPI_STATUS (AE_BAD_PARAMETER); 760 if (Width % 8 != 0 || Value == NULL || Context == NULL) 761 return_ACPI_STATUS (AE_BAD_PARAMETER); 762 if (Address + Width / 8 > 256) 763 return_ACPI_STATUS (AE_BAD_ADDRESS); 764 765 /* 766 * If booting, check if we need to run the query handler. If so, we 767 * we call it directly here since our thread taskq is not active yet. 768 */ 769 if (cold || rebooting || sc->ec_suspending) { 770 if ((EC_GET_CSR(sc) & EC_EVENT_SCI)) { 771 CTR0(KTR_ACPI, "ec running gpe handler directly"); 772 EcGpeQueryHandler(sc); 773 } 774 } 775 776 /* Serialize with EcGpeQueryHandler() at transaction granularity. */ 777 Status = EcLock(sc); 778 if (ACPI_FAILURE(Status)) 779 return_ACPI_STATUS (Status); 780 781 /* If we can't start burst mode, continue anyway. */ 782 Status = EcCommand(sc, EC_COMMAND_BURST_ENABLE); 783 if (ACPI_SUCCESS(Status)) { 784 if (EC_GET_DATA(sc) == EC_BURST_ACK) { 785 CTR0(KTR_ACPI, "ec burst enabled"); 786 sc->ec_burstactive = TRUE; 787 } 788 } 789 790 /* Perform the transaction(s), based on Width. */ 791 EcAddr = Address; 792 EcData = (UINT8 *)Value; 793 if (Function == ACPI_READ) 794 *Value = 0; 795 do { 796 switch (Function) { 797 case ACPI_READ: 798 Status = EcRead(sc, EcAddr, EcData); 799 break; 800 case ACPI_WRITE: 801 Status = EcWrite(sc, EcAddr, *EcData); 802 break; 803 } 804 if (ACPI_FAILURE(Status)) 805 break; 806 EcAddr++; 807 EcData++; 808 } while (EcAddr < Address + Width / 8); 809 810 if (sc->ec_burstactive) { 811 sc->ec_burstactive = FALSE; 812 if (ACPI_SUCCESS(EcCommand(sc, EC_COMMAND_BURST_DISABLE))) 813 CTR0(KTR_ACPI, "ec disabled burst ok"); 814 } 815 816 EcUnlock(sc); 817 return_ACPI_STATUS (Status); 818 } 819 820 static ACPI_STATUS 821 EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, u_int gen_count) 822 { 823 static int no_intr = 0; 824 ACPI_STATUS Status; 825 int count, i, need_poll, slp_ival; 826 827 ACPI_SERIAL_ASSERT(ec); 828 Status = AE_NO_HARDWARE_RESPONSE; 829 need_poll = cold || rebooting || ec_polled_mode || sc->ec_suspending; 830 831 /* Wait for event by polling or GPE (interrupt). */ 832 if (need_poll) { 833 count = (ec_timeout * 1000) / EC_POLL_DELAY; 834 if (count == 0) 835 count = 1; 836 DELAY(10); 837 for (i = 0; i < count; i++) { 838 Status = EcCheckStatus(sc, "poll", Event); 839 if (Status == AE_OK) 840 break; 841 DELAY(EC_POLL_DELAY); 842 } 843 } else { 844 slp_ival = hz / 1000; 845 if (slp_ival != 0) { 846 count = ec_timeout; 847 } else { 848 /* hz has less than 1 ms resolution so scale timeout. */ 849 slp_ival = 1; 850 count = ec_timeout / (1000 / hz); 851 } 852 853 /* 854 * Wait for the GPE to signal the status changed, checking the 855 * status register each time we get one. It's possible to get a 856 * GPE for an event we're not interested in here (i.e., SCI for 857 * EC query). 858 */ 859 for (i = 0; i < count; i++) { 860 if (gen_count == sc->ec_gencount) 861 tsleep(&sc, 0, "ecgpe", slp_ival); 862 /* 863 * Record new generation count. It's possible the GPE was 864 * just to notify us that a query is needed and we need to 865 * wait for a second GPE to signal the completion of the 866 * event we are actually waiting for. 867 */ 868 Status = EcCheckStatus(sc, "sleep", Event); 869 if (Status == AE_OK) { 870 if (gen_count == sc->ec_gencount) 871 no_intr++; 872 else 873 no_intr = 0; 874 break; 875 } 876 gen_count = sc->ec_gencount; 877 } 878 879 /* 880 * We finished waiting for the GPE and it never arrived. Try to 881 * read the register once and trust whatever value we got. This is 882 * the best we can do at this point. 883 */ 884 if (Status != AE_OK) 885 Status = EcCheckStatus(sc, "sleep_end", Event); 886 } 887 if (!need_poll && no_intr > 10) { 888 device_printf(sc->ec_dev, 889 "not getting interrupts, switched to polled mode\n"); 890 ec_polled_mode = 1; 891 } 892 if (Status != AE_OK) 893 CTR0(KTR_ACPI, "error: ec wait timed out"); 894 return (Status); 895 } 896 897 static ACPI_STATUS 898 EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd) 899 { 900 ACPI_STATUS status; 901 EC_EVENT event; 902 EC_STATUS ec_status; 903 u_int gen_count; 904 905 ACPI_SERIAL_ASSERT(ec); 906 907 /* Don't use burst mode if user disabled it. */ 908 if (!ec_burst_mode && cmd == EC_COMMAND_BURST_ENABLE) 909 return (AE_ERROR); 910 911 /* Decide what to wait for based on command type. */ 912 switch (cmd) { 913 case EC_COMMAND_READ: 914 case EC_COMMAND_WRITE: 915 case EC_COMMAND_BURST_DISABLE: 916 event = EC_EVENT_INPUT_BUFFER_EMPTY; 917 break; 918 case EC_COMMAND_QUERY: 919 case EC_COMMAND_BURST_ENABLE: 920 event = EC_EVENT_OUTPUT_BUFFER_FULL; 921 break; 922 default: 923 device_printf(sc->ec_dev, "EcCommand: invalid command %#x\n", cmd); 924 return (AE_BAD_PARAMETER); 925 } 926 927 /* 928 * Ensure empty input buffer before issuing command. 929 * Use generation count of zero to force a quick check. 930 */ 931 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, 0); 932 if (ACPI_FAILURE(status)) 933 return (status); 934 935 /* Run the command and wait for the chosen event. */ 936 CTR1(KTR_ACPI, "ec running command %#x", cmd); 937 gen_count = sc->ec_gencount; 938 EC_SET_CSR(sc, cmd); 939 status = EcWaitEvent(sc, event, gen_count); 940 if (ACPI_SUCCESS(status)) { 941 /* If we succeeded, burst flag should now be present. */ 942 if (cmd == EC_COMMAND_BURST_ENABLE) { 943 ec_status = EC_GET_CSR(sc); 944 if ((ec_status & EC_FLAG_BURST_MODE) == 0) 945 status = AE_ERROR; 946 } 947 } else 948 device_printf(sc->ec_dev, "EcCommand: no response to %#x\n", cmd); 949 return (status); 950 } 951 952 static ACPI_STATUS 953 EcRead(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data) 954 { 955 ACPI_STATUS status; 956 u_int gen_count; 957 int retry; 958 959 ACPI_SERIAL_ASSERT(ec); 960 CTR1(KTR_ACPI, "ec read from %#x", Address); 961 962 for (retry = 0; retry < 2; retry++) { 963 status = EcCommand(sc, EC_COMMAND_READ); 964 if (ACPI_FAILURE(status)) 965 return (status); 966 967 gen_count = sc->ec_gencount; 968 EC_SET_DATA(sc, Address); 969 status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL, gen_count); 970 if (ACPI_FAILURE(status)) { 971 if (EcCheckStatus(sc, "retr_check", 972 EC_EVENT_INPUT_BUFFER_EMPTY) == AE_OK) 973 continue; 974 else 975 break; 976 } 977 *Data = EC_GET_DATA(sc); 978 return (AE_OK); 979 } 980 device_printf(sc->ec_dev, "EcRead: failed waiting to get data\n"); 981 return (status); 982 } 983 984 static ACPI_STATUS 985 EcWrite(struct acpi_ec_softc *sc, UINT8 Address, UINT8 Data) 986 { 987 ACPI_STATUS status; 988 u_int gen_count; 989 990 ACPI_SERIAL_ASSERT(ec); 991 CTR2(KTR_ACPI, "ec write to %#x, data %#x", Address, Data); 992 993 status = EcCommand(sc, EC_COMMAND_WRITE); 994 if (ACPI_FAILURE(status)) 995 return (status); 996 997 gen_count = sc->ec_gencount; 998 EC_SET_DATA(sc, Address); 999 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count); 1000 if (ACPI_FAILURE(status)) { 1001 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent address\n"); 1002 return (status); 1003 } 1004 1005 gen_count = sc->ec_gencount; 1006 EC_SET_DATA(sc, Data); 1007 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count); 1008 if (ACPI_FAILURE(status)) { 1009 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent data\n"); 1010 return (status); 1011 } 1012 1013 return (AE_OK); 1014 } 1015