1 /*- 2 * Copyright (c) 2003-2007 Nate Lawson 3 * Copyright (c) 2000 Michael Smith 4 * Copyright (c) 2000 BSDi 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 #include "opt_acpi.h" 31 #include <sys/param.h> 32 #include <sys/kernel.h> 33 #include <sys/ktr.h> 34 #include <sys/bus.h> 35 #include <sys/lock.h> 36 #include <sys/malloc.h> 37 #include <sys/module.h> 38 #include <sys/sx.h> 39 40 #include <machine/bus.h> 41 #include <machine/resource.h> 42 #include <sys/rman.h> 43 44 #include <contrib/dev/acpica/include/acpi.h> 45 #include <contrib/dev/acpica/include/accommon.h> 46 47 #include <dev/acpica/acpivar.h> 48 49 /* Hooks for the ACPI CA debugging infrastructure */ 50 #define _COMPONENT ACPI_EC 51 ACPI_MODULE_NAME("EC") 52 53 /* 54 * EC_COMMAND: 55 * ----------- 56 */ 57 typedef UINT8 EC_COMMAND; 58 59 #define EC_COMMAND_UNKNOWN ((EC_COMMAND) 0x00) 60 #define EC_COMMAND_READ ((EC_COMMAND) 0x80) 61 #define EC_COMMAND_WRITE ((EC_COMMAND) 0x81) 62 #define EC_COMMAND_BURST_ENABLE ((EC_COMMAND) 0x82) 63 #define EC_COMMAND_BURST_DISABLE ((EC_COMMAND) 0x83) 64 #define EC_COMMAND_QUERY ((EC_COMMAND) 0x84) 65 66 /* 67 * EC_STATUS: 68 * ---------- 69 * The encoding of the EC status register is illustrated below. 70 * Note that a set bit (1) indicates the property is TRUE 71 * (e.g. if bit 0 is set then the output buffer is full). 72 * +-+-+-+-+-+-+-+-+ 73 * |7|6|5|4|3|2|1|0| 74 * +-+-+-+-+-+-+-+-+ 75 * | | | | | | | | 76 * | | | | | | | +- Output Buffer Full? 77 * | | | | | | +--- Input Buffer Full? 78 * | | | | | +----- <reserved> 79 * | | | | +------- Data Register is Command Byte? 80 * | | | +--------- Burst Mode Enabled? 81 * | | +----------- SCI Event? 82 * | +------------- SMI Event? 83 * +--------------- <reserved> 84 * 85 */ 86 typedef UINT8 EC_STATUS; 87 88 #define EC_FLAG_OUTPUT_BUFFER ((EC_STATUS) 0x01) 89 #define EC_FLAG_INPUT_BUFFER ((EC_STATUS) 0x02) 90 #define EC_FLAG_DATA_IS_CMD ((EC_STATUS) 0x08) 91 #define EC_FLAG_BURST_MODE ((EC_STATUS) 0x10) 92 93 /* 94 * EC_EVENT: 95 * --------- 96 */ 97 typedef UINT8 EC_EVENT; 98 99 #define EC_EVENT_UNKNOWN ((EC_EVENT) 0x00) 100 #define EC_EVENT_OUTPUT_BUFFER_FULL ((EC_EVENT) 0x01) 101 #define EC_EVENT_INPUT_BUFFER_EMPTY ((EC_EVENT) 0x02) 102 #define EC_EVENT_SCI ((EC_EVENT) 0x20) 103 #define EC_EVENT_SMI ((EC_EVENT) 0x40) 104 105 /* Data byte returned after burst enable indicating it was successful. */ 106 #define EC_BURST_ACK 0x90 107 108 /* 109 * Register access primitives 110 */ 111 #define EC_GET_DATA(sc) \ 112 bus_space_read_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0) 113 114 #define EC_SET_DATA(sc, v) \ 115 bus_space_write_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0, (v)) 116 117 #define EC_GET_CSR(sc) \ 118 bus_space_read_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0) 119 120 #define EC_SET_CSR(sc, v) \ 121 bus_space_write_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0, (v)) 122 123 /* Additional params to pass from the probe routine */ 124 struct acpi_ec_params { 125 int glk; 126 int gpe_bit; 127 ACPI_HANDLE gpe_handle; 128 int uid; 129 }; 130 131 /* 132 * Driver softc. 133 */ 134 struct acpi_ec_softc { 135 device_t ec_dev; 136 ACPI_HANDLE ec_handle; 137 int ec_uid; 138 ACPI_HANDLE ec_gpehandle; 139 UINT8 ec_gpebit; 140 141 int ec_data_rid; 142 struct resource *ec_data_res; 143 bus_space_tag_t ec_data_tag; 144 bus_space_handle_t ec_data_handle; 145 146 int ec_csr_rid; 147 struct resource *ec_csr_res; 148 bus_space_tag_t ec_csr_tag; 149 bus_space_handle_t ec_csr_handle; 150 151 int ec_glk; 152 int ec_glkhandle; 153 int ec_burstactive; 154 int ec_sci_pend; 155 volatile u_int ec_gencount; 156 int ec_suspending; 157 }; 158 159 /* 160 * XXX njl 161 * I couldn't find it in the spec but other implementations also use a 162 * value of 1 ms for the time to acquire global lock. 163 */ 164 #define EC_LOCK_TIMEOUT 1000 165 166 /* Default delay in microseconds between each run of the status polling loop. */ 167 #define EC_POLL_DELAY 50 168 169 /* Total time in ms spent waiting for a response from EC. */ 170 #define EC_TIMEOUT 750 171 172 #define EVENT_READY(event, status) \ 173 (((event) == EC_EVENT_OUTPUT_BUFFER_FULL && \ 174 ((status) & EC_FLAG_OUTPUT_BUFFER) != 0) || \ 175 ((event) == EC_EVENT_INPUT_BUFFER_EMPTY && \ 176 ((status) & EC_FLAG_INPUT_BUFFER) == 0)) 177 178 ACPI_SERIAL_DECL(ec, "ACPI embedded controller"); 179 180 static SYSCTL_NODE(_debug_acpi, OID_AUTO, ec, 181 CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 182 "EC debugging"); 183 184 static int ec_burst_mode; 185 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, burst, CTLFLAG_RWTUN, &ec_burst_mode, 0, 186 "Enable use of burst mode (faster for nearly all systems)"); 187 static int ec_polled_mode; 188 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, polled, CTLFLAG_RWTUN, &ec_polled_mode, 0, 189 "Force use of polled mode (only if interrupt mode doesn't work)"); 190 static int ec_timeout = EC_TIMEOUT; 191 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout, CTLFLAG_RWTUN, &ec_timeout, 192 EC_TIMEOUT, "Total time spent waiting for a response (poll+sleep)"); 193 194 static ACPI_STATUS 195 EcLock(struct acpi_ec_softc *sc) 196 { 197 ACPI_STATUS status; 198 199 /* If _GLK is non-zero, acquire the global lock. */ 200 status = AE_OK; 201 if (sc->ec_glk) { 202 status = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->ec_glkhandle); 203 if (ACPI_FAILURE(status)) 204 return (status); 205 } 206 ACPI_SERIAL_BEGIN(ec); 207 return (status); 208 } 209 210 static void 211 EcUnlock(struct acpi_ec_softc *sc) 212 { 213 ACPI_SERIAL_END(ec); 214 if (sc->ec_glk) 215 AcpiReleaseGlobalLock(sc->ec_glkhandle); 216 } 217 218 static UINT32 EcGpeHandler(ACPI_HANDLE, UINT32, void *); 219 static ACPI_STATUS EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, 220 void *Context, void **return_Context); 221 static ACPI_STATUS EcSpaceHandler(UINT32 Function, 222 ACPI_PHYSICAL_ADDRESS Address, 223 UINT32 Width, UINT64 *Value, 224 void *Context, void *RegionContext); 225 static ACPI_STATUS EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, 226 u_int gen_count); 227 static ACPI_STATUS EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd); 228 static ACPI_STATUS EcRead(struct acpi_ec_softc *sc, UINT8 Address, 229 UINT8 *Data); 230 static ACPI_STATUS EcWrite(struct acpi_ec_softc *sc, UINT8 Address, 231 UINT8 Data); 232 static int acpi_ec_probe(device_t dev); 233 static int acpi_ec_attach(device_t dev); 234 static int acpi_ec_suspend(device_t dev); 235 static int acpi_ec_resume(device_t dev); 236 static int acpi_ec_shutdown(device_t dev); 237 static int acpi_ec_read_method(device_t dev, u_int addr, 238 UINT64 *val, int width); 239 static int acpi_ec_write_method(device_t dev, u_int addr, 240 UINT64 val, int width); 241 242 static device_method_t acpi_ec_methods[] = { 243 /* Device interface */ 244 DEVMETHOD(device_probe, acpi_ec_probe), 245 DEVMETHOD(device_attach, acpi_ec_attach), 246 DEVMETHOD(device_suspend, acpi_ec_suspend), 247 DEVMETHOD(device_resume, acpi_ec_resume), 248 DEVMETHOD(device_shutdown, acpi_ec_shutdown), 249 250 /* Embedded controller interface */ 251 DEVMETHOD(acpi_ec_read, acpi_ec_read_method), 252 DEVMETHOD(acpi_ec_write, acpi_ec_write_method), 253 254 DEVMETHOD_END 255 }; 256 257 static driver_t acpi_ec_driver = { 258 "acpi_ec", 259 acpi_ec_methods, 260 sizeof(struct acpi_ec_softc), 261 }; 262 263 DRIVER_MODULE(acpi_ec, acpi, acpi_ec_driver, 0, 0); 264 MODULE_DEPEND(acpi_ec, acpi, 1, 1, 1); 265 266 /* 267 * Look for an ECDT and if we find one, set up default GPE and 268 * space handlers to catch attempts to access EC space before 269 * we have a real driver instance in place. 270 * 271 * TODO: Some old Gateway laptops need us to fake up an ECDT or 272 * otherwise attach early so that _REG methods can run. 273 */ 274 void 275 acpi_ec_ecdt_probe(device_t parent) 276 { 277 ACPI_TABLE_ECDT *ecdt; 278 ACPI_STATUS status; 279 device_t child; 280 ACPI_HANDLE h; 281 struct acpi_ec_params *params; 282 283 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 284 285 /* Find and validate the ECDT. */ 286 status = AcpiGetTable(ACPI_SIG_ECDT, 1, (ACPI_TABLE_HEADER **)&ecdt); 287 if (ACPI_FAILURE(status) || 288 ecdt->Control.BitWidth != 8 || 289 ecdt->Data.BitWidth != 8) { 290 return; 291 } 292 293 /* Create the child device with the given unit number. */ 294 child = BUS_ADD_CHILD(parent, 3, "acpi_ec", ecdt->Uid); 295 if (child == NULL) { 296 printf("%s: can't add child\n", __func__); 297 return; 298 } 299 300 /* Find and save the ACPI handle for this device. */ 301 status = AcpiGetHandle(NULL, ecdt->Id, &h); 302 if (ACPI_FAILURE(status)) { 303 device_delete_child(parent, child); 304 printf("%s: can't get handle\n", __func__); 305 return; 306 } 307 acpi_set_handle(child, h); 308 309 /* Set the data and CSR register addresses. */ 310 bus_set_resource(child, SYS_RES_IOPORT, 0, ecdt->Data.Address, 311 /*count*/1); 312 bus_set_resource(child, SYS_RES_IOPORT, 1, ecdt->Control.Address, 313 /*count*/1); 314 315 /* 316 * Store values for the probe/attach routines to use. Store the 317 * ECDT GPE bit and set the global lock flag according to _GLK. 318 * Note that it is not perfectly correct to be evaluating a method 319 * before initializing devices, but in practice this function 320 * should be safe to call at this point. 321 */ 322 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO); 323 params->gpe_handle = NULL; 324 params->gpe_bit = ecdt->Gpe; 325 params->uid = ecdt->Uid; 326 acpi_GetInteger(h, "_GLK", ¶ms->glk); 327 acpi_set_private(child, params); 328 329 /* Finish the attach process. */ 330 if (device_probe_and_attach(child) != 0) 331 device_delete_child(parent, child); 332 } 333 334 static int 335 acpi_ec_probe(device_t dev) 336 { 337 ACPI_BUFFER buf; 338 ACPI_HANDLE h; 339 ACPI_OBJECT *obj; 340 ACPI_STATUS status; 341 device_t peer; 342 char desc[64]; 343 int ecdt; 344 int ret, rc; 345 struct acpi_ec_params *params; 346 static char *ec_ids[] = { "PNP0C09", NULL }; 347 348 ret = ENXIO; 349 350 /* Check that this is a device and that EC is not disabled. */ 351 if (acpi_get_type(dev) != ACPI_TYPE_DEVICE || acpi_disabled("ec")) 352 return (ret); 353 354 if (device_is_devclass_fixed(dev)) { 355 /* 356 * If probed via ECDT, set description and continue. Otherwise, we can 357 * access the namespace and make sure this is not a duplicate probe. 358 */ 359 ecdt = 1; 360 params = acpi_get_private(dev); 361 if (params != NULL) 362 ret = 0; 363 364 goto out; 365 } else 366 ecdt = 0; 367 368 rc = ACPI_ID_PROBE(device_get_parent(dev), dev, ec_ids, NULL); 369 if (rc > 0) 370 return (rc); 371 372 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO); 373 374 buf.Pointer = NULL; 375 buf.Length = ACPI_ALLOCATE_BUFFER; 376 h = acpi_get_handle(dev); 377 378 /* 379 * Read the unit ID to check for duplicate attach and the global lock value 380 * to see if we should acquire it when accessing the EC. 381 */ 382 status = acpi_GetInteger(h, "_UID", ¶ms->uid); 383 if (ACPI_FAILURE(status)) 384 params->uid = 0; 385 386 /* 387 * Check for a duplicate probe. This can happen when a probe via ECDT 388 * succeeded already. If this is a duplicate, disable this device. 389 * 390 * NB: It would seem device_disable would be sufficient to not get 391 * duplicated devices, and ENXIO isn't needed, however, device_probe() only 392 * checks DF_ENABLED at the start and so disabling it here is too late to 393 * prevent device_attach() from being called. 394 */ 395 peer = devclass_get_device(device_get_devclass(dev), params->uid); 396 if (peer != NULL && device_is_alive(peer)) { 397 device_disable(dev); 398 goto out; 399 } 400 401 status = acpi_GetInteger(h, "_GLK", ¶ms->glk); 402 if (ACPI_FAILURE(status)) 403 params->glk = 0; 404 405 /* 406 * Evaluate the _GPE method to find the GPE bit used by the EC to signal 407 * status (SCI). If it's a package, it contains a reference and GPE bit, 408 * similar to _PRW. 409 */ 410 status = AcpiEvaluateObject(h, "_GPE", NULL, &buf); 411 if (ACPI_FAILURE(status)) { 412 device_printf(dev, "can't evaluate _GPE - %s\n", AcpiFormatException(status)); 413 goto out; 414 } 415 416 obj = (ACPI_OBJECT *)buf.Pointer; 417 if (obj == NULL) 418 goto out; 419 420 switch (obj->Type) { 421 case ACPI_TYPE_INTEGER: 422 params->gpe_handle = NULL; 423 params->gpe_bit = obj->Integer.Value; 424 break; 425 case ACPI_TYPE_PACKAGE: 426 if (!ACPI_PKG_VALID(obj, 2)) 427 goto out; 428 params->gpe_handle = acpi_GetReference(NULL, &obj->Package.Elements[0]); 429 if (params->gpe_handle == NULL || 430 acpi_PkgInt32(obj, 1, ¶ms->gpe_bit) != 0) 431 goto out; 432 break; 433 default: 434 device_printf(dev, "_GPE has invalid type %d\n", obj->Type); 435 goto out; 436 } 437 438 /* Store the values we got from the namespace for attach. */ 439 acpi_set_private(dev, params); 440 441 if (buf.Pointer) 442 AcpiOsFree(buf.Pointer); 443 444 ret = rc; 445 out: 446 if (ret <= 0) { 447 snprintf(desc, sizeof(desc), "Embedded Controller: GPE %#x%s%s", 448 params->gpe_bit, (params->glk) ? ", GLK" : "", 449 ecdt ? ", ECDT" : ""); 450 device_set_desc_copy(dev, desc); 451 } else 452 free(params, M_TEMP); 453 454 return (ret); 455 } 456 457 static int 458 acpi_ec_attach(device_t dev) 459 { 460 struct acpi_ec_softc *sc; 461 struct acpi_ec_params *params; 462 ACPI_STATUS Status; 463 464 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 465 466 /* Fetch/initialize softc (assumes softc is pre-zeroed). */ 467 sc = device_get_softc(dev); 468 params = acpi_get_private(dev); 469 sc->ec_dev = dev; 470 sc->ec_handle = acpi_get_handle(dev); 471 472 /* Retrieve previously probed values via device ivars. */ 473 sc->ec_glk = params->glk; 474 sc->ec_gpebit = params->gpe_bit; 475 sc->ec_gpehandle = params->gpe_handle; 476 sc->ec_uid = params->uid; 477 sc->ec_suspending = FALSE; 478 acpi_set_private(dev, NULL); 479 free(params, M_TEMP); 480 481 /* Attach bus resources for data and command/status ports. */ 482 sc->ec_data_rid = 0; 483 sc->ec_data_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT, 484 &sc->ec_data_rid, RF_ACTIVE); 485 if (sc->ec_data_res == NULL) { 486 device_printf(dev, "can't allocate data port\n"); 487 goto error; 488 } 489 sc->ec_data_tag = rman_get_bustag(sc->ec_data_res); 490 sc->ec_data_handle = rman_get_bushandle(sc->ec_data_res); 491 492 sc->ec_csr_rid = 1; 493 sc->ec_csr_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT, 494 &sc->ec_csr_rid, RF_ACTIVE); 495 if (sc->ec_csr_res == NULL) { 496 device_printf(dev, "can't allocate command/status port\n"); 497 goto error; 498 } 499 sc->ec_csr_tag = rman_get_bustag(sc->ec_csr_res); 500 sc->ec_csr_handle = rman_get_bushandle(sc->ec_csr_res); 501 502 /* 503 * Install a handler for this EC's GPE bit. We want edge-triggered 504 * behavior. 505 */ 506 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching GPE handler\n")); 507 Status = AcpiInstallGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, 508 ACPI_GPE_EDGE_TRIGGERED, EcGpeHandler, sc); 509 if (ACPI_FAILURE(Status)) { 510 device_printf(dev, "can't install GPE handler for %s - %s\n", 511 acpi_name(sc->ec_handle), AcpiFormatException(Status)); 512 goto error; 513 } 514 515 /* 516 * Install address space handler 517 */ 518 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching address space handler\n")); 519 Status = AcpiInstallAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC, 520 &EcSpaceHandler, &EcSpaceSetup, sc); 521 if (ACPI_FAILURE(Status)) { 522 device_printf(dev, "can't install address space handler for %s - %s\n", 523 acpi_name(sc->ec_handle), AcpiFormatException(Status)); 524 goto error; 525 } 526 527 /* Enable runtime GPEs for the handler. */ 528 Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit); 529 if (ACPI_FAILURE(Status)) { 530 device_printf(dev, "AcpiEnableGpe failed: %s\n", 531 AcpiFormatException(Status)); 532 goto error; 533 } 534 535 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "acpi_ec_attach complete\n")); 536 return (0); 537 538 error: 539 AcpiRemoveGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, EcGpeHandler); 540 AcpiRemoveAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC, 541 EcSpaceHandler); 542 if (sc->ec_csr_res) 543 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_csr_rid, 544 sc->ec_csr_res); 545 if (sc->ec_data_res) 546 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_data_rid, 547 sc->ec_data_res); 548 return (ENXIO); 549 } 550 551 static int 552 acpi_ec_suspend(device_t dev) 553 { 554 struct acpi_ec_softc *sc; 555 556 sc = device_get_softc(dev); 557 sc->ec_suspending = TRUE; 558 return (0); 559 } 560 561 static int 562 acpi_ec_resume(device_t dev) 563 { 564 struct acpi_ec_softc *sc; 565 566 sc = device_get_softc(dev); 567 sc->ec_suspending = FALSE; 568 return (0); 569 } 570 571 static int 572 acpi_ec_shutdown(device_t dev) 573 { 574 struct acpi_ec_softc *sc; 575 576 /* Disable the GPE so we don't get EC events during shutdown. */ 577 sc = device_get_softc(dev); 578 AcpiDisableGpe(sc->ec_gpehandle, sc->ec_gpebit); 579 return (0); 580 } 581 582 /* Methods to allow other devices (e.g., smbat) to read/write EC space. */ 583 static int 584 acpi_ec_read_method(device_t dev, u_int addr, UINT64 *val, int width) 585 { 586 struct acpi_ec_softc *sc; 587 ACPI_STATUS status; 588 589 sc = device_get_softc(dev); 590 status = EcSpaceHandler(ACPI_READ, addr, width * 8, val, sc, NULL); 591 if (ACPI_FAILURE(status)) 592 return (ENXIO); 593 return (0); 594 } 595 596 static int 597 acpi_ec_write_method(device_t dev, u_int addr, UINT64 val, int width) 598 { 599 struct acpi_ec_softc *sc; 600 ACPI_STATUS status; 601 602 sc = device_get_softc(dev); 603 status = EcSpaceHandler(ACPI_WRITE, addr, width * 8, &val, sc, NULL); 604 if (ACPI_FAILURE(status)) 605 return (ENXIO); 606 return (0); 607 } 608 609 static ACPI_STATUS 610 EcCheckStatus(struct acpi_ec_softc *sc, const char *msg, EC_EVENT event) 611 { 612 ACPI_STATUS status; 613 EC_STATUS ec_status; 614 615 status = AE_NO_HARDWARE_RESPONSE; 616 ec_status = EC_GET_CSR(sc); 617 if (sc->ec_burstactive && !(ec_status & EC_FLAG_BURST_MODE)) { 618 CTR1(KTR_ACPI, "ec burst disabled in waitevent (%s)", msg); 619 sc->ec_burstactive = FALSE; 620 } 621 if (EVENT_READY(event, ec_status)) { 622 CTR2(KTR_ACPI, "ec %s wait ready, status %#x", msg, ec_status); 623 status = AE_OK; 624 } 625 return (status); 626 } 627 628 static void 629 EcGpeQueryHandlerSub(struct acpi_ec_softc *sc) 630 { 631 UINT8 Data; 632 ACPI_STATUS Status; 633 int retry; 634 char qxx[5]; 635 636 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 637 638 /* Serialize user access with EcSpaceHandler(). */ 639 Status = EcLock(sc); 640 if (ACPI_FAILURE(Status)) { 641 device_printf(sc->ec_dev, "GpeQuery lock error: %s\n", 642 AcpiFormatException(Status)); 643 return; 644 } 645 646 /* 647 * Send a query command to the EC to find out which _Qxx call it 648 * wants to make. This command clears the SCI bit and also the 649 * interrupt source since we are edge-triggered. To prevent the GPE 650 * that may arise from running the query from causing another query 651 * to be queued, we clear the pending flag only after running it. 652 */ 653 for (retry = 0; retry < 2; retry++) { 654 Status = EcCommand(sc, EC_COMMAND_QUERY); 655 if (ACPI_SUCCESS(Status)) 656 break; 657 if (ACPI_FAILURE(EcCheckStatus(sc, "retr_check", 658 EC_EVENT_INPUT_BUFFER_EMPTY))) 659 break; 660 } 661 if (ACPI_FAILURE(Status)) { 662 EcUnlock(sc); 663 device_printf(sc->ec_dev, "GPE query failed: %s\n", 664 AcpiFormatException(Status)); 665 return; 666 } 667 Data = EC_GET_DATA(sc); 668 669 /* 670 * We have to unlock before running the _Qxx method below since that 671 * method may attempt to read/write from EC address space, causing 672 * recursive acquisition of the lock. 673 */ 674 EcUnlock(sc); 675 676 /* Ignore the value for "no outstanding event". (13.3.5) */ 677 CTR2(KTR_ACPI, "ec query ok,%s running _Q%02X", Data ? "" : " not", Data); 678 if (Data == 0) 679 return; 680 681 /* Evaluate _Qxx to respond to the controller. */ 682 snprintf(qxx, sizeof(qxx), "_Q%02X", Data); 683 AcpiUtStrupr(qxx); 684 Status = AcpiEvaluateObject(sc->ec_handle, qxx, NULL, NULL); 685 if (ACPI_FAILURE(Status) && Status != AE_NOT_FOUND) { 686 device_printf(sc->ec_dev, "evaluation of query method %s failed: %s\n", 687 qxx, AcpiFormatException(Status)); 688 } 689 } 690 691 static void 692 EcGpeQueryHandler(void *Context) 693 { 694 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context; 695 int pending; 696 697 KASSERT(Context != NULL, ("EcGpeQueryHandler called with NULL")); 698 699 do { 700 /* Read the current pending count */ 701 pending = atomic_load_acq_int(&sc->ec_sci_pend); 702 703 /* Call GPE handler function */ 704 EcGpeQueryHandlerSub(sc); 705 706 /* 707 * Try to reset the pending count to zero. If this fails we 708 * know another GPE event has occurred while handling the 709 * current GPE event and need to loop. 710 */ 711 } while (!atomic_cmpset_int(&sc->ec_sci_pend, pending, 0)); 712 } 713 714 /* 715 * The GPE handler is called when IBE/OBF or SCI events occur. We are 716 * called from an unknown lock context. 717 */ 718 static UINT32 719 EcGpeHandler(ACPI_HANDLE GpeDevice, UINT32 GpeNumber, void *Context) 720 { 721 struct acpi_ec_softc *sc = Context; 722 ACPI_STATUS Status; 723 EC_STATUS EcStatus; 724 725 KASSERT(Context != NULL, ("EcGpeHandler called with NULL")); 726 CTR0(KTR_ACPI, "ec gpe handler start"); 727 728 /* 729 * Notify EcWaitEvent() that the status register is now fresh. If we 730 * didn't do this, it wouldn't be possible to distinguish an old IBE 731 * from a new one, for example when doing a write transaction (writing 732 * address and then data values.) 733 */ 734 atomic_add_int(&sc->ec_gencount, 1); 735 wakeup(sc); 736 737 /* 738 * If the EC_SCI bit of the status register is set, queue a query handler. 739 * It will run the query and _Qxx method later, under the lock. 740 */ 741 EcStatus = EC_GET_CSR(sc); 742 if ((EcStatus & EC_EVENT_SCI) && 743 atomic_fetchadd_int(&sc->ec_sci_pend, 1) == 0) { 744 CTR0(KTR_ACPI, "ec gpe queueing query handler"); 745 Status = AcpiOsExecute(OSL_GPE_HANDLER, EcGpeQueryHandler, Context); 746 if (ACPI_FAILURE(Status)) { 747 printf("EcGpeHandler: queuing GPE query handler failed\n"); 748 atomic_store_rel_int(&sc->ec_sci_pend, 0); 749 } 750 } 751 return (ACPI_REENABLE_GPE); 752 } 753 754 static ACPI_STATUS 755 EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, void *Context, 756 void **RegionContext) 757 { 758 759 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 760 761 /* 762 * If deactivating a region, always set the output to NULL. Otherwise, 763 * just pass the context through. 764 */ 765 if (Function == ACPI_REGION_DEACTIVATE) 766 *RegionContext = NULL; 767 else 768 *RegionContext = Context; 769 770 return_ACPI_STATUS (AE_OK); 771 } 772 773 static ACPI_STATUS 774 EcSpaceHandler(UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 Width, 775 UINT64 *Value, void *Context, void *RegionContext) 776 { 777 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context; 778 ACPI_PHYSICAL_ADDRESS EcAddr; 779 UINT8 *EcData; 780 ACPI_STATUS Status; 781 782 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, (UINT32)Address); 783 784 if (Function != ACPI_READ && Function != ACPI_WRITE) 785 return_ACPI_STATUS (AE_BAD_PARAMETER); 786 if (Width % 8 != 0 || Value == NULL || Context == NULL) 787 return_ACPI_STATUS (AE_BAD_PARAMETER); 788 if (Address + Width / 8 > 256) 789 return_ACPI_STATUS (AE_BAD_ADDRESS); 790 791 /* 792 * If booting, check if we need to run the query handler. If so, we 793 * we call it directly here since our thread taskq is not active yet. 794 */ 795 if (cold || rebooting || sc->ec_suspending) { 796 if ((EC_GET_CSR(sc) & EC_EVENT_SCI) && 797 atomic_fetchadd_int(&sc->ec_sci_pend, 1) == 0) { 798 CTR0(KTR_ACPI, "ec running gpe handler directly"); 799 EcGpeQueryHandler(sc); 800 } 801 } 802 803 /* Serialize with EcGpeQueryHandler() at transaction granularity. */ 804 Status = EcLock(sc); 805 if (ACPI_FAILURE(Status)) 806 return_ACPI_STATUS (Status); 807 808 /* If we can't start burst mode, continue anyway. */ 809 Status = EcCommand(sc, EC_COMMAND_BURST_ENABLE); 810 if (ACPI_SUCCESS(Status)) { 811 if (EC_GET_DATA(sc) == EC_BURST_ACK) { 812 CTR0(KTR_ACPI, "ec burst enabled"); 813 sc->ec_burstactive = TRUE; 814 } 815 } 816 817 /* Perform the transaction(s), based on Width. */ 818 EcAddr = Address; 819 EcData = (UINT8 *)Value; 820 if (Function == ACPI_READ) 821 *Value = 0; 822 do { 823 switch (Function) { 824 case ACPI_READ: 825 Status = EcRead(sc, EcAddr, EcData); 826 break; 827 case ACPI_WRITE: 828 Status = EcWrite(sc, EcAddr, *EcData); 829 break; 830 } 831 if (ACPI_FAILURE(Status)) 832 break; 833 EcAddr++; 834 EcData++; 835 } while (EcAddr < Address + Width / 8); 836 837 if (sc->ec_burstactive) { 838 sc->ec_burstactive = FALSE; 839 if (ACPI_SUCCESS(EcCommand(sc, EC_COMMAND_BURST_DISABLE))) 840 CTR0(KTR_ACPI, "ec disabled burst ok"); 841 } 842 843 EcUnlock(sc); 844 return_ACPI_STATUS (Status); 845 } 846 847 static ACPI_STATUS 848 EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, u_int gen_count) 849 { 850 static int no_intr = 0; 851 ACPI_STATUS Status; 852 int count, i, need_poll, slp_ival; 853 854 ACPI_SERIAL_ASSERT(ec); 855 Status = AE_NO_HARDWARE_RESPONSE; 856 need_poll = cold || rebooting || ec_polled_mode || sc->ec_suspending; 857 858 /* Wait for event by polling or GPE (interrupt). */ 859 if (need_poll) { 860 count = (ec_timeout * 1000) / EC_POLL_DELAY; 861 if (count == 0) 862 count = 1; 863 DELAY(10); 864 for (i = 0; i < count; i++) { 865 Status = EcCheckStatus(sc, "poll", Event); 866 if (ACPI_SUCCESS(Status)) 867 break; 868 DELAY(EC_POLL_DELAY); 869 } 870 } else { 871 slp_ival = hz / 1000; 872 if (slp_ival != 0) { 873 count = ec_timeout; 874 } else { 875 /* hz has less than 1 ms resolution so scale timeout. */ 876 slp_ival = 1; 877 count = ec_timeout / (1000 / hz); 878 } 879 880 /* 881 * Wait for the GPE to signal the status changed, checking the 882 * status register each time we get one. It's possible to get a 883 * GPE for an event we're not interested in here (i.e., SCI for 884 * EC query). 885 */ 886 for (i = 0; i < count; i++) { 887 if (gen_count == sc->ec_gencount) 888 tsleep(sc, 0, "ecgpe", slp_ival); 889 /* 890 * Record new generation count. It's possible the GPE was 891 * just to notify us that a query is needed and we need to 892 * wait for a second GPE to signal the completion of the 893 * event we are actually waiting for. 894 */ 895 Status = EcCheckStatus(sc, "sleep", Event); 896 if (ACPI_SUCCESS(Status)) { 897 if (gen_count == sc->ec_gencount) 898 no_intr++; 899 else 900 no_intr = 0; 901 break; 902 } 903 gen_count = sc->ec_gencount; 904 } 905 906 /* 907 * We finished waiting for the GPE and it never arrived. Try to 908 * read the register once and trust whatever value we got. This is 909 * the best we can do at this point. 910 */ 911 if (ACPI_FAILURE(Status)) 912 Status = EcCheckStatus(sc, "sleep_end", Event); 913 } 914 if (!need_poll && no_intr > 10) { 915 device_printf(sc->ec_dev, 916 "not getting interrupts, switched to polled mode\n"); 917 ec_polled_mode = 1; 918 } 919 if (ACPI_FAILURE(Status)) 920 CTR0(KTR_ACPI, "error: ec wait timed out"); 921 return (Status); 922 } 923 924 static ACPI_STATUS 925 EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd) 926 { 927 ACPI_STATUS status; 928 EC_EVENT event; 929 EC_STATUS ec_status; 930 u_int gen_count; 931 932 ACPI_SERIAL_ASSERT(ec); 933 934 /* Don't use burst mode if user disabled it. */ 935 if (!ec_burst_mode && cmd == EC_COMMAND_BURST_ENABLE) 936 return (AE_ERROR); 937 938 /* Decide what to wait for based on command type. */ 939 switch (cmd) { 940 case EC_COMMAND_READ: 941 case EC_COMMAND_WRITE: 942 case EC_COMMAND_BURST_DISABLE: 943 event = EC_EVENT_INPUT_BUFFER_EMPTY; 944 break; 945 case EC_COMMAND_QUERY: 946 case EC_COMMAND_BURST_ENABLE: 947 event = EC_EVENT_OUTPUT_BUFFER_FULL; 948 break; 949 default: 950 device_printf(sc->ec_dev, "EcCommand: invalid command %#x\n", cmd); 951 return (AE_BAD_PARAMETER); 952 } 953 954 /* 955 * Ensure empty input buffer before issuing command. 956 * Use generation count of zero to force a quick check. 957 */ 958 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, 0); 959 if (ACPI_FAILURE(status)) 960 return (status); 961 962 /* Run the command and wait for the chosen event. */ 963 CTR1(KTR_ACPI, "ec running command %#x", cmd); 964 gen_count = sc->ec_gencount; 965 EC_SET_CSR(sc, cmd); 966 status = EcWaitEvent(sc, event, gen_count); 967 if (ACPI_SUCCESS(status)) { 968 /* If we succeeded, burst flag should now be present. */ 969 if (cmd == EC_COMMAND_BURST_ENABLE) { 970 ec_status = EC_GET_CSR(sc); 971 if ((ec_status & EC_FLAG_BURST_MODE) == 0) 972 status = AE_ERROR; 973 } 974 } else 975 device_printf(sc->ec_dev, "EcCommand: no response to %#x\n", cmd); 976 return (status); 977 } 978 979 static ACPI_STATUS 980 EcRead(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data) 981 { 982 ACPI_STATUS status; 983 u_int gen_count; 984 int retry; 985 986 ACPI_SERIAL_ASSERT(ec); 987 CTR1(KTR_ACPI, "ec read from %#x", Address); 988 989 for (retry = 0; retry < 2; retry++) { 990 status = EcCommand(sc, EC_COMMAND_READ); 991 if (ACPI_FAILURE(status)) 992 return (status); 993 994 gen_count = sc->ec_gencount; 995 EC_SET_DATA(sc, Address); 996 status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL, gen_count); 997 if (ACPI_SUCCESS(status)) { 998 *Data = EC_GET_DATA(sc); 999 return (AE_OK); 1000 } 1001 if (ACPI_FAILURE(EcCheckStatus(sc, "retr_check", 1002 EC_EVENT_INPUT_BUFFER_EMPTY))) 1003 break; 1004 } 1005 device_printf(sc->ec_dev, "EcRead: failed waiting to get data\n"); 1006 return (status); 1007 } 1008 1009 static ACPI_STATUS 1010 EcWrite(struct acpi_ec_softc *sc, UINT8 Address, UINT8 Data) 1011 { 1012 ACPI_STATUS status; 1013 u_int gen_count; 1014 1015 ACPI_SERIAL_ASSERT(ec); 1016 CTR2(KTR_ACPI, "ec write to %#x, data %#x", Address, Data); 1017 1018 status = EcCommand(sc, EC_COMMAND_WRITE); 1019 if (ACPI_FAILURE(status)) 1020 return (status); 1021 1022 gen_count = sc->ec_gencount; 1023 EC_SET_DATA(sc, Address); 1024 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count); 1025 if (ACPI_FAILURE(status)) { 1026 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent address\n"); 1027 return (status); 1028 } 1029 1030 gen_count = sc->ec_gencount; 1031 EC_SET_DATA(sc, Data); 1032 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count); 1033 if (ACPI_FAILURE(status)) { 1034 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent data\n"); 1035 return (status); 1036 } 1037 1038 return (AE_OK); 1039 } 1040