1 /*- 2 * Copyright (c) 2003-2007 Nate Lawson 3 * Copyright (c) 2000 Michael Smith 4 * Copyright (c) 2000 BSDi 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include "opt_acpi.h" 33 #include <sys/param.h> 34 #include <sys/kernel.h> 35 #include <sys/bus.h> 36 #include <sys/lock.h> 37 #include <sys/malloc.h> 38 #include <sys/module.h> 39 #include <sys/sx.h> 40 41 #include <machine/bus.h> 42 #include <machine/resource.h> 43 #include <sys/rman.h> 44 45 #include <contrib/dev/acpica/include/acpi.h> 46 #include <contrib/dev/acpica/include/accommon.h> 47 48 #include <dev/acpica/acpivar.h> 49 50 /* Hooks for the ACPI CA debugging infrastructure */ 51 #define _COMPONENT ACPI_EC 52 ACPI_MODULE_NAME("EC") 53 54 /* 55 * EC_COMMAND: 56 * ----------- 57 */ 58 typedef UINT8 EC_COMMAND; 59 60 #define EC_COMMAND_UNKNOWN ((EC_COMMAND) 0x00) 61 #define EC_COMMAND_READ ((EC_COMMAND) 0x80) 62 #define EC_COMMAND_WRITE ((EC_COMMAND) 0x81) 63 #define EC_COMMAND_BURST_ENABLE ((EC_COMMAND) 0x82) 64 #define EC_COMMAND_BURST_DISABLE ((EC_COMMAND) 0x83) 65 #define EC_COMMAND_QUERY ((EC_COMMAND) 0x84) 66 67 /* 68 * EC_STATUS: 69 * ---------- 70 * The encoding of the EC status register is illustrated below. 71 * Note that a set bit (1) indicates the property is TRUE 72 * (e.g. if bit 0 is set then the output buffer is full). 73 * +-+-+-+-+-+-+-+-+ 74 * |7|6|5|4|3|2|1|0| 75 * +-+-+-+-+-+-+-+-+ 76 * | | | | | | | | 77 * | | | | | | | +- Output Buffer Full? 78 * | | | | | | +--- Input Buffer Full? 79 * | | | | | +----- <reserved> 80 * | | | | +------- Data Register is Command Byte? 81 * | | | +--------- Burst Mode Enabled? 82 * | | +----------- SCI Event? 83 * | +------------- SMI Event? 84 * +--------------- <reserved> 85 * 86 */ 87 typedef UINT8 EC_STATUS; 88 89 #define EC_FLAG_OUTPUT_BUFFER ((EC_STATUS) 0x01) 90 #define EC_FLAG_INPUT_BUFFER ((EC_STATUS) 0x02) 91 #define EC_FLAG_DATA_IS_CMD ((EC_STATUS) 0x08) 92 #define EC_FLAG_BURST_MODE ((EC_STATUS) 0x10) 93 94 /* 95 * EC_EVENT: 96 * --------- 97 */ 98 typedef UINT8 EC_EVENT; 99 100 #define EC_EVENT_UNKNOWN ((EC_EVENT) 0x00) 101 #define EC_EVENT_OUTPUT_BUFFER_FULL ((EC_EVENT) 0x01) 102 #define EC_EVENT_INPUT_BUFFER_EMPTY ((EC_EVENT) 0x02) 103 #define EC_EVENT_SCI ((EC_EVENT) 0x20) 104 #define EC_EVENT_SMI ((EC_EVENT) 0x40) 105 106 /* Data byte returned after burst enable indicating it was successful. */ 107 #define EC_BURST_ACK 0x90 108 109 /* 110 * Register access primitives 111 */ 112 #define EC_GET_DATA(sc) \ 113 bus_space_read_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0) 114 115 #define EC_SET_DATA(sc, v) \ 116 bus_space_write_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0, (v)) 117 118 #define EC_GET_CSR(sc) \ 119 bus_space_read_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0) 120 121 #define EC_SET_CSR(sc, v) \ 122 bus_space_write_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0, (v)) 123 124 /* Additional params to pass from the probe routine */ 125 struct acpi_ec_params { 126 int glk; 127 int gpe_bit; 128 ACPI_HANDLE gpe_handle; 129 int uid; 130 }; 131 132 /* 133 * Driver softc. 134 */ 135 struct acpi_ec_softc { 136 device_t ec_dev; 137 ACPI_HANDLE ec_handle; 138 int ec_uid; 139 ACPI_HANDLE ec_gpehandle; 140 UINT8 ec_gpebit; 141 142 int ec_data_rid; 143 struct resource *ec_data_res; 144 bus_space_tag_t ec_data_tag; 145 bus_space_handle_t ec_data_handle; 146 147 int ec_csr_rid; 148 struct resource *ec_csr_res; 149 bus_space_tag_t ec_csr_tag; 150 bus_space_handle_t ec_csr_handle; 151 152 int ec_glk; 153 int ec_glkhandle; 154 int ec_burstactive; 155 int ec_sci_pend; 156 volatile u_int ec_gencount; 157 int ec_suspending; 158 }; 159 160 /* 161 * XXX njl 162 * I couldn't find it in the spec but other implementations also use a 163 * value of 1 ms for the time to acquire global lock. 164 */ 165 #define EC_LOCK_TIMEOUT 1000 166 167 /* Default delay in microseconds between each run of the status polling loop. */ 168 #define EC_POLL_DELAY 50 169 170 /* Total time in ms spent waiting for a response from EC. */ 171 #define EC_TIMEOUT 750 172 173 #define EVENT_READY(event, status) \ 174 (((event) == EC_EVENT_OUTPUT_BUFFER_FULL && \ 175 ((status) & EC_FLAG_OUTPUT_BUFFER) != 0) || \ 176 ((event) == EC_EVENT_INPUT_BUFFER_EMPTY && \ 177 ((status) & EC_FLAG_INPUT_BUFFER) == 0)) 178 179 ACPI_SERIAL_DECL(ec, "ACPI embedded controller"); 180 181 static SYSCTL_NODE(_debug_acpi, OID_AUTO, ec, CTLFLAG_RD, NULL, "EC debugging"); 182 183 static int ec_burst_mode; 184 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, burst, CTLFLAG_RWTUN, &ec_burst_mode, 0, 185 "Enable use of burst mode (faster for nearly all systems)"); 186 static int ec_polled_mode; 187 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, polled, CTLFLAG_RWTUN, &ec_polled_mode, 0, 188 "Force use of polled mode (only if interrupt mode doesn't work)"); 189 static int ec_timeout = EC_TIMEOUT; 190 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout, CTLFLAG_RWTUN, &ec_timeout, 191 EC_TIMEOUT, "Total time spent waiting for a response (poll+sleep)"); 192 193 static ACPI_STATUS 194 EcLock(struct acpi_ec_softc *sc) 195 { 196 ACPI_STATUS status; 197 198 /* If _GLK is non-zero, acquire the global lock. */ 199 status = AE_OK; 200 if (sc->ec_glk) { 201 status = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->ec_glkhandle); 202 if (ACPI_FAILURE(status)) 203 return (status); 204 } 205 ACPI_SERIAL_BEGIN(ec); 206 return (status); 207 } 208 209 static void 210 EcUnlock(struct acpi_ec_softc *sc) 211 { 212 ACPI_SERIAL_END(ec); 213 if (sc->ec_glk) 214 AcpiReleaseGlobalLock(sc->ec_glkhandle); 215 } 216 217 static UINT32 EcGpeHandler(ACPI_HANDLE, UINT32, void *); 218 static ACPI_STATUS EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, 219 void *Context, void **return_Context); 220 static ACPI_STATUS EcSpaceHandler(UINT32 Function, 221 ACPI_PHYSICAL_ADDRESS Address, 222 UINT32 Width, UINT64 *Value, 223 void *Context, void *RegionContext); 224 static ACPI_STATUS EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, 225 u_int gen_count); 226 static ACPI_STATUS EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd); 227 static ACPI_STATUS EcRead(struct acpi_ec_softc *sc, UINT8 Address, 228 UINT8 *Data); 229 static ACPI_STATUS EcWrite(struct acpi_ec_softc *sc, UINT8 Address, 230 UINT8 Data); 231 static int acpi_ec_probe(device_t dev); 232 static int acpi_ec_attach(device_t dev); 233 static int acpi_ec_suspend(device_t dev); 234 static int acpi_ec_resume(device_t dev); 235 static int acpi_ec_shutdown(device_t dev); 236 static int acpi_ec_read_method(device_t dev, u_int addr, 237 UINT64 *val, int width); 238 static int acpi_ec_write_method(device_t dev, u_int addr, 239 UINT64 val, int width); 240 241 static device_method_t acpi_ec_methods[] = { 242 /* Device interface */ 243 DEVMETHOD(device_probe, acpi_ec_probe), 244 DEVMETHOD(device_attach, acpi_ec_attach), 245 DEVMETHOD(device_suspend, acpi_ec_suspend), 246 DEVMETHOD(device_resume, acpi_ec_resume), 247 DEVMETHOD(device_shutdown, acpi_ec_shutdown), 248 249 /* Embedded controller interface */ 250 DEVMETHOD(acpi_ec_read, acpi_ec_read_method), 251 DEVMETHOD(acpi_ec_write, acpi_ec_write_method), 252 253 DEVMETHOD_END 254 }; 255 256 static driver_t acpi_ec_driver = { 257 "acpi_ec", 258 acpi_ec_methods, 259 sizeof(struct acpi_ec_softc), 260 }; 261 262 static devclass_t acpi_ec_devclass; 263 DRIVER_MODULE(acpi_ec, acpi, acpi_ec_driver, acpi_ec_devclass, 0, 0); 264 MODULE_DEPEND(acpi_ec, acpi, 1, 1, 1); 265 266 /* 267 * Look for an ECDT and if we find one, set up default GPE and 268 * space handlers to catch attempts to access EC space before 269 * we have a real driver instance in place. 270 * 271 * TODO: Some old Gateway laptops need us to fake up an ECDT or 272 * otherwise attach early so that _REG methods can run. 273 */ 274 void 275 acpi_ec_ecdt_probe(device_t parent) 276 { 277 ACPI_TABLE_ECDT *ecdt; 278 ACPI_STATUS status; 279 device_t child; 280 ACPI_HANDLE h; 281 struct acpi_ec_params *params; 282 283 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 284 285 /* Find and validate the ECDT. */ 286 status = AcpiGetTable(ACPI_SIG_ECDT, 1, (ACPI_TABLE_HEADER **)&ecdt); 287 if (ACPI_FAILURE(status) || 288 ecdt->Control.BitWidth != 8 || 289 ecdt->Data.BitWidth != 8) { 290 return; 291 } 292 293 /* Create the child device with the given unit number. */ 294 child = BUS_ADD_CHILD(parent, 3, "acpi_ec", ecdt->Uid); 295 if (child == NULL) { 296 printf("%s: can't add child\n", __func__); 297 return; 298 } 299 300 /* Find and save the ACPI handle for this device. */ 301 status = AcpiGetHandle(NULL, ecdt->Id, &h); 302 if (ACPI_FAILURE(status)) { 303 device_delete_child(parent, child); 304 printf("%s: can't get handle\n", __func__); 305 return; 306 } 307 acpi_set_handle(child, h); 308 309 /* Set the data and CSR register addresses. */ 310 bus_set_resource(child, SYS_RES_IOPORT, 0, ecdt->Data.Address, 311 /*count*/1); 312 bus_set_resource(child, SYS_RES_IOPORT, 1, ecdt->Control.Address, 313 /*count*/1); 314 315 /* 316 * Store values for the probe/attach routines to use. Store the 317 * ECDT GPE bit and set the global lock flag according to _GLK. 318 * Note that it is not perfectly correct to be evaluating a method 319 * before initializing devices, but in practice this function 320 * should be safe to call at this point. 321 */ 322 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO); 323 params->gpe_handle = NULL; 324 params->gpe_bit = ecdt->Gpe; 325 params->uid = ecdt->Uid; 326 acpi_GetInteger(h, "_GLK", ¶ms->glk); 327 acpi_set_private(child, params); 328 329 /* Finish the attach process. */ 330 if (device_probe_and_attach(child) != 0) 331 device_delete_child(parent, child); 332 } 333 334 static int 335 acpi_ec_probe(device_t dev) 336 { 337 ACPI_BUFFER buf; 338 ACPI_HANDLE h; 339 ACPI_OBJECT *obj; 340 ACPI_STATUS status; 341 device_t peer; 342 char desc[64]; 343 int ecdt; 344 int ret; 345 struct acpi_ec_params *params; 346 static char *ec_ids[] = { "PNP0C09", NULL }; 347 348 /* Check that this is a device and that EC is not disabled. */ 349 if (acpi_get_type(dev) != ACPI_TYPE_DEVICE || acpi_disabled("ec")) 350 return (ENXIO); 351 352 /* 353 * If probed via ECDT, set description and continue. Otherwise, 354 * we can access the namespace and make sure this is not a 355 * duplicate probe. 356 */ 357 ret = ENXIO; 358 ecdt = 0; 359 buf.Pointer = NULL; 360 buf.Length = ACPI_ALLOCATE_BUFFER; 361 params = acpi_get_private(dev); 362 if (params != NULL) { 363 ecdt = 1; 364 ret = 0; 365 } else if (ACPI_ID_PROBE(device_get_parent(dev), dev, ec_ids)) { 366 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, 367 M_WAITOK | M_ZERO); 368 h = acpi_get_handle(dev); 369 370 /* 371 * Read the unit ID to check for duplicate attach and the 372 * global lock value to see if we should acquire it when 373 * accessing the EC. 374 */ 375 status = acpi_GetInteger(h, "_UID", ¶ms->uid); 376 if (ACPI_FAILURE(status)) 377 params->uid = 0; 378 status = acpi_GetInteger(h, "_GLK", ¶ms->glk); 379 if (ACPI_FAILURE(status)) 380 params->glk = 0; 381 382 /* 383 * Evaluate the _GPE method to find the GPE bit used by the EC to 384 * signal status (SCI). If it's a package, it contains a reference 385 * and GPE bit, similar to _PRW. 386 */ 387 status = AcpiEvaluateObject(h, "_GPE", NULL, &buf); 388 if (ACPI_FAILURE(status)) { 389 device_printf(dev, "can't evaluate _GPE - %s\n", 390 AcpiFormatException(status)); 391 goto out; 392 } 393 obj = (ACPI_OBJECT *)buf.Pointer; 394 if (obj == NULL) 395 goto out; 396 397 switch (obj->Type) { 398 case ACPI_TYPE_INTEGER: 399 params->gpe_handle = NULL; 400 params->gpe_bit = obj->Integer.Value; 401 break; 402 case ACPI_TYPE_PACKAGE: 403 if (!ACPI_PKG_VALID(obj, 2)) 404 goto out; 405 params->gpe_handle = 406 acpi_GetReference(NULL, &obj->Package.Elements[0]); 407 if (params->gpe_handle == NULL || 408 acpi_PkgInt32(obj, 1, ¶ms->gpe_bit) != 0) 409 goto out; 410 break; 411 default: 412 device_printf(dev, "_GPE has invalid type %d\n", obj->Type); 413 goto out; 414 } 415 416 /* Store the values we got from the namespace for attach. */ 417 acpi_set_private(dev, params); 418 419 /* 420 * Check for a duplicate probe. This can happen when a probe 421 * via ECDT succeeded already. If this is a duplicate, disable 422 * this device. 423 */ 424 peer = devclass_get_device(acpi_ec_devclass, params->uid); 425 if (peer == NULL || !device_is_alive(peer)) 426 ret = 0; 427 else 428 device_disable(dev); 429 } 430 431 out: 432 if (ret == 0) { 433 snprintf(desc, sizeof(desc), "Embedded Controller: GPE %#x%s%s", 434 params->gpe_bit, (params->glk) ? ", GLK" : "", 435 ecdt ? ", ECDT" : ""); 436 device_set_desc_copy(dev, desc); 437 } else 438 free(params, M_TEMP); 439 if (buf.Pointer) 440 AcpiOsFree(buf.Pointer); 441 return (ret); 442 } 443 444 static int 445 acpi_ec_attach(device_t dev) 446 { 447 struct acpi_ec_softc *sc; 448 struct acpi_ec_params *params; 449 ACPI_STATUS Status; 450 451 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 452 453 /* Fetch/initialize softc (assumes softc is pre-zeroed). */ 454 sc = device_get_softc(dev); 455 params = acpi_get_private(dev); 456 sc->ec_dev = dev; 457 sc->ec_handle = acpi_get_handle(dev); 458 459 /* Retrieve previously probed values via device ivars. */ 460 sc->ec_glk = params->glk; 461 sc->ec_gpebit = params->gpe_bit; 462 sc->ec_gpehandle = params->gpe_handle; 463 sc->ec_uid = params->uid; 464 sc->ec_suspending = FALSE; 465 acpi_set_private(dev, NULL); 466 free(params, M_TEMP); 467 468 /* Attach bus resources for data and command/status ports. */ 469 sc->ec_data_rid = 0; 470 sc->ec_data_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT, 471 &sc->ec_data_rid, RF_ACTIVE); 472 if (sc->ec_data_res == NULL) { 473 device_printf(dev, "can't allocate data port\n"); 474 goto error; 475 } 476 sc->ec_data_tag = rman_get_bustag(sc->ec_data_res); 477 sc->ec_data_handle = rman_get_bushandle(sc->ec_data_res); 478 479 sc->ec_csr_rid = 1; 480 sc->ec_csr_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT, 481 &sc->ec_csr_rid, RF_ACTIVE); 482 if (sc->ec_csr_res == NULL) { 483 device_printf(dev, "can't allocate command/status port\n"); 484 goto error; 485 } 486 sc->ec_csr_tag = rman_get_bustag(sc->ec_csr_res); 487 sc->ec_csr_handle = rman_get_bushandle(sc->ec_csr_res); 488 489 /* 490 * Install a handler for this EC's GPE bit. We want edge-triggered 491 * behavior. 492 */ 493 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching GPE handler\n")); 494 Status = AcpiInstallGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, 495 ACPI_GPE_EDGE_TRIGGERED, EcGpeHandler, sc); 496 if (ACPI_FAILURE(Status)) { 497 device_printf(dev, "can't install GPE handler for %s - %s\n", 498 acpi_name(sc->ec_handle), AcpiFormatException(Status)); 499 goto error; 500 } 501 502 /* 503 * Install address space handler 504 */ 505 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching address space handler\n")); 506 Status = AcpiInstallAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC, 507 &EcSpaceHandler, &EcSpaceSetup, sc); 508 if (ACPI_FAILURE(Status)) { 509 device_printf(dev, "can't install address space handler for %s - %s\n", 510 acpi_name(sc->ec_handle), AcpiFormatException(Status)); 511 goto error; 512 } 513 514 /* Enable runtime GPEs for the handler. */ 515 Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit); 516 if (ACPI_FAILURE(Status)) { 517 device_printf(dev, "AcpiEnableGpe failed: %s\n", 518 AcpiFormatException(Status)); 519 goto error; 520 } 521 522 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "acpi_ec_attach complete\n")); 523 return (0); 524 525 error: 526 AcpiRemoveGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, EcGpeHandler); 527 AcpiRemoveAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC, 528 EcSpaceHandler); 529 if (sc->ec_csr_res) 530 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_csr_rid, 531 sc->ec_csr_res); 532 if (sc->ec_data_res) 533 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_data_rid, 534 sc->ec_data_res); 535 return (ENXIO); 536 } 537 538 static int 539 acpi_ec_suspend(device_t dev) 540 { 541 struct acpi_ec_softc *sc; 542 543 sc = device_get_softc(dev); 544 sc->ec_suspending = TRUE; 545 return (0); 546 } 547 548 static int 549 acpi_ec_resume(device_t dev) 550 { 551 struct acpi_ec_softc *sc; 552 553 sc = device_get_softc(dev); 554 sc->ec_suspending = FALSE; 555 return (0); 556 } 557 558 static int 559 acpi_ec_shutdown(device_t dev) 560 { 561 struct acpi_ec_softc *sc; 562 563 /* Disable the GPE so we don't get EC events during shutdown. */ 564 sc = device_get_softc(dev); 565 AcpiDisableGpe(sc->ec_gpehandle, sc->ec_gpebit); 566 return (0); 567 } 568 569 /* Methods to allow other devices (e.g., smbat) to read/write EC space. */ 570 static int 571 acpi_ec_read_method(device_t dev, u_int addr, UINT64 *val, int width) 572 { 573 struct acpi_ec_softc *sc; 574 ACPI_STATUS status; 575 576 sc = device_get_softc(dev); 577 status = EcSpaceHandler(ACPI_READ, addr, width * 8, val, sc, NULL); 578 if (ACPI_FAILURE(status)) 579 return (ENXIO); 580 return (0); 581 } 582 583 static int 584 acpi_ec_write_method(device_t dev, u_int addr, UINT64 val, int width) 585 { 586 struct acpi_ec_softc *sc; 587 ACPI_STATUS status; 588 589 sc = device_get_softc(dev); 590 status = EcSpaceHandler(ACPI_WRITE, addr, width * 8, &val, sc, NULL); 591 if (ACPI_FAILURE(status)) 592 return (ENXIO); 593 return (0); 594 } 595 596 static ACPI_STATUS 597 EcCheckStatus(struct acpi_ec_softc *sc, const char *msg, EC_EVENT event) 598 { 599 ACPI_STATUS status; 600 EC_STATUS ec_status; 601 602 status = AE_NO_HARDWARE_RESPONSE; 603 ec_status = EC_GET_CSR(sc); 604 if (sc->ec_burstactive && !(ec_status & EC_FLAG_BURST_MODE)) { 605 CTR1(KTR_ACPI, "ec burst disabled in waitevent (%s)", msg); 606 sc->ec_burstactive = FALSE; 607 } 608 if (EVENT_READY(event, ec_status)) { 609 CTR2(KTR_ACPI, "ec %s wait ready, status %#x", msg, ec_status); 610 status = AE_OK; 611 } 612 return (status); 613 } 614 615 static void 616 EcGpeQueryHandler(void *Context) 617 { 618 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context; 619 UINT8 Data; 620 ACPI_STATUS Status; 621 int retry; 622 char qxx[5]; 623 624 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 625 KASSERT(Context != NULL, ("EcGpeQueryHandler called with NULL")); 626 627 /* Serialize user access with EcSpaceHandler(). */ 628 Status = EcLock(sc); 629 if (ACPI_FAILURE(Status)) { 630 device_printf(sc->ec_dev, "GpeQuery lock error: %s\n", 631 AcpiFormatException(Status)); 632 return; 633 } 634 635 /* 636 * Send a query command to the EC to find out which _Qxx call it 637 * wants to make. This command clears the SCI bit and also the 638 * interrupt source since we are edge-triggered. To prevent the GPE 639 * that may arise from running the query from causing another query 640 * to be queued, we clear the pending flag only after running it. 641 */ 642 for (retry = 0; retry < 2; retry++) { 643 Status = EcCommand(sc, EC_COMMAND_QUERY); 644 if (ACPI_SUCCESS(Status)) 645 break; 646 if (ACPI_FAILURE(EcCheckStatus(sc, "retr_check", 647 EC_EVENT_INPUT_BUFFER_EMPTY))) 648 break; 649 } 650 sc->ec_sci_pend = FALSE; 651 if (ACPI_FAILURE(Status)) { 652 EcUnlock(sc); 653 device_printf(sc->ec_dev, "GPE query failed: %s\n", 654 AcpiFormatException(Status)); 655 return; 656 } 657 Data = EC_GET_DATA(sc); 658 659 /* 660 * We have to unlock before running the _Qxx method below since that 661 * method may attempt to read/write from EC address space, causing 662 * recursive acquisition of the lock. 663 */ 664 EcUnlock(sc); 665 666 /* Ignore the value for "no outstanding event". (13.3.5) */ 667 CTR2(KTR_ACPI, "ec query ok,%s running _Q%02X", Data ? "" : " not", Data); 668 if (Data == 0) 669 return; 670 671 /* Evaluate _Qxx to respond to the controller. */ 672 snprintf(qxx, sizeof(qxx), "_Q%02X", Data); 673 AcpiUtStrupr(qxx); 674 Status = AcpiEvaluateObject(sc->ec_handle, qxx, NULL, NULL); 675 if (ACPI_FAILURE(Status) && Status != AE_NOT_FOUND) { 676 device_printf(sc->ec_dev, "evaluation of query method %s failed: %s\n", 677 qxx, AcpiFormatException(Status)); 678 } 679 } 680 681 /* 682 * The GPE handler is called when IBE/OBF or SCI events occur. We are 683 * called from an unknown lock context. 684 */ 685 static UINT32 686 EcGpeHandler(ACPI_HANDLE GpeDevice, UINT32 GpeNumber, void *Context) 687 { 688 struct acpi_ec_softc *sc = Context; 689 ACPI_STATUS Status; 690 EC_STATUS EcStatus; 691 692 KASSERT(Context != NULL, ("EcGpeHandler called with NULL")); 693 CTR0(KTR_ACPI, "ec gpe handler start"); 694 695 /* 696 * Notify EcWaitEvent() that the status register is now fresh. If we 697 * didn't do this, it wouldn't be possible to distinguish an old IBE 698 * from a new one, for example when doing a write transaction (writing 699 * address and then data values.) 700 */ 701 atomic_add_int(&sc->ec_gencount, 1); 702 wakeup(sc); 703 704 /* 705 * If the EC_SCI bit of the status register is set, queue a query handler. 706 * It will run the query and _Qxx method later, under the lock. 707 */ 708 EcStatus = EC_GET_CSR(sc); 709 if ((EcStatus & EC_EVENT_SCI) && !sc->ec_sci_pend) { 710 CTR0(KTR_ACPI, "ec gpe queueing query handler"); 711 Status = AcpiOsExecute(OSL_GPE_HANDLER, EcGpeQueryHandler, Context); 712 if (ACPI_SUCCESS(Status)) 713 sc->ec_sci_pend = TRUE; 714 else 715 printf("EcGpeHandler: queuing GPE query handler failed\n"); 716 } 717 return (ACPI_REENABLE_GPE); 718 } 719 720 static ACPI_STATUS 721 EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, void *Context, 722 void **RegionContext) 723 { 724 725 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__); 726 727 /* 728 * If deactivating a region, always set the output to NULL. Otherwise, 729 * just pass the context through. 730 */ 731 if (Function == ACPI_REGION_DEACTIVATE) 732 *RegionContext = NULL; 733 else 734 *RegionContext = Context; 735 736 return_ACPI_STATUS (AE_OK); 737 } 738 739 static ACPI_STATUS 740 EcSpaceHandler(UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 Width, 741 UINT64 *Value, void *Context, void *RegionContext) 742 { 743 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context; 744 ACPI_PHYSICAL_ADDRESS EcAddr; 745 UINT8 *EcData; 746 ACPI_STATUS Status; 747 748 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, (UINT32)Address); 749 750 if (Function != ACPI_READ && Function != ACPI_WRITE) 751 return_ACPI_STATUS (AE_BAD_PARAMETER); 752 if (Width % 8 != 0 || Value == NULL || Context == NULL) 753 return_ACPI_STATUS (AE_BAD_PARAMETER); 754 if (Address + Width / 8 > 256) 755 return_ACPI_STATUS (AE_BAD_ADDRESS); 756 757 /* 758 * If booting, check if we need to run the query handler. If so, we 759 * we call it directly here since our thread taskq is not active yet. 760 */ 761 if (cold || rebooting || sc->ec_suspending) { 762 if ((EC_GET_CSR(sc) & EC_EVENT_SCI)) { 763 CTR0(KTR_ACPI, "ec running gpe handler directly"); 764 EcGpeQueryHandler(sc); 765 } 766 } 767 768 /* Serialize with EcGpeQueryHandler() at transaction granularity. */ 769 Status = EcLock(sc); 770 if (ACPI_FAILURE(Status)) 771 return_ACPI_STATUS (Status); 772 773 /* If we can't start burst mode, continue anyway. */ 774 Status = EcCommand(sc, EC_COMMAND_BURST_ENABLE); 775 if (ACPI_SUCCESS(Status)) { 776 if (EC_GET_DATA(sc) == EC_BURST_ACK) { 777 CTR0(KTR_ACPI, "ec burst enabled"); 778 sc->ec_burstactive = TRUE; 779 } 780 } 781 782 /* Perform the transaction(s), based on Width. */ 783 EcAddr = Address; 784 EcData = (UINT8 *)Value; 785 if (Function == ACPI_READ) 786 *Value = 0; 787 do { 788 switch (Function) { 789 case ACPI_READ: 790 Status = EcRead(sc, EcAddr, EcData); 791 break; 792 case ACPI_WRITE: 793 Status = EcWrite(sc, EcAddr, *EcData); 794 break; 795 } 796 if (ACPI_FAILURE(Status)) 797 break; 798 EcAddr++; 799 EcData++; 800 } while (EcAddr < Address + Width / 8); 801 802 if (sc->ec_burstactive) { 803 sc->ec_burstactive = FALSE; 804 if (ACPI_SUCCESS(EcCommand(sc, EC_COMMAND_BURST_DISABLE))) 805 CTR0(KTR_ACPI, "ec disabled burst ok"); 806 } 807 808 EcUnlock(sc); 809 return_ACPI_STATUS (Status); 810 } 811 812 static ACPI_STATUS 813 EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, u_int gen_count) 814 { 815 static int no_intr = 0; 816 ACPI_STATUS Status; 817 int count, i, need_poll, slp_ival; 818 819 ACPI_SERIAL_ASSERT(ec); 820 Status = AE_NO_HARDWARE_RESPONSE; 821 need_poll = cold || rebooting || ec_polled_mode || sc->ec_suspending; 822 823 /* Wait for event by polling or GPE (interrupt). */ 824 if (need_poll) { 825 count = (ec_timeout * 1000) / EC_POLL_DELAY; 826 if (count == 0) 827 count = 1; 828 DELAY(10); 829 for (i = 0; i < count; i++) { 830 Status = EcCheckStatus(sc, "poll", Event); 831 if (ACPI_SUCCESS(Status)) 832 break; 833 DELAY(EC_POLL_DELAY); 834 } 835 } else { 836 slp_ival = hz / 1000; 837 if (slp_ival != 0) { 838 count = ec_timeout; 839 } else { 840 /* hz has less than 1 ms resolution so scale timeout. */ 841 slp_ival = 1; 842 count = ec_timeout / (1000 / hz); 843 } 844 845 /* 846 * Wait for the GPE to signal the status changed, checking the 847 * status register each time we get one. It's possible to get a 848 * GPE for an event we're not interested in here (i.e., SCI for 849 * EC query). 850 */ 851 for (i = 0; i < count; i++) { 852 if (gen_count == sc->ec_gencount) 853 tsleep(sc, 0, "ecgpe", slp_ival); 854 /* 855 * Record new generation count. It's possible the GPE was 856 * just to notify us that a query is needed and we need to 857 * wait for a second GPE to signal the completion of the 858 * event we are actually waiting for. 859 */ 860 Status = EcCheckStatus(sc, "sleep", Event); 861 if (ACPI_SUCCESS(Status)) { 862 if (gen_count == sc->ec_gencount) 863 no_intr++; 864 else 865 no_intr = 0; 866 break; 867 } 868 gen_count = sc->ec_gencount; 869 } 870 871 /* 872 * We finished waiting for the GPE and it never arrived. Try to 873 * read the register once and trust whatever value we got. This is 874 * the best we can do at this point. 875 */ 876 if (ACPI_FAILURE(Status)) 877 Status = EcCheckStatus(sc, "sleep_end", Event); 878 } 879 if (!need_poll && no_intr > 10) { 880 device_printf(sc->ec_dev, 881 "not getting interrupts, switched to polled mode\n"); 882 ec_polled_mode = 1; 883 } 884 if (ACPI_FAILURE(Status)) 885 CTR0(KTR_ACPI, "error: ec wait timed out"); 886 return (Status); 887 } 888 889 static ACPI_STATUS 890 EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd) 891 { 892 ACPI_STATUS status; 893 EC_EVENT event; 894 EC_STATUS ec_status; 895 u_int gen_count; 896 897 ACPI_SERIAL_ASSERT(ec); 898 899 /* Don't use burst mode if user disabled it. */ 900 if (!ec_burst_mode && cmd == EC_COMMAND_BURST_ENABLE) 901 return (AE_ERROR); 902 903 /* Decide what to wait for based on command type. */ 904 switch (cmd) { 905 case EC_COMMAND_READ: 906 case EC_COMMAND_WRITE: 907 case EC_COMMAND_BURST_DISABLE: 908 event = EC_EVENT_INPUT_BUFFER_EMPTY; 909 break; 910 case EC_COMMAND_QUERY: 911 case EC_COMMAND_BURST_ENABLE: 912 event = EC_EVENT_OUTPUT_BUFFER_FULL; 913 break; 914 default: 915 device_printf(sc->ec_dev, "EcCommand: invalid command %#x\n", cmd); 916 return (AE_BAD_PARAMETER); 917 } 918 919 /* 920 * Ensure empty input buffer before issuing command. 921 * Use generation count of zero to force a quick check. 922 */ 923 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, 0); 924 if (ACPI_FAILURE(status)) 925 return (status); 926 927 /* Run the command and wait for the chosen event. */ 928 CTR1(KTR_ACPI, "ec running command %#x", cmd); 929 gen_count = sc->ec_gencount; 930 EC_SET_CSR(sc, cmd); 931 status = EcWaitEvent(sc, event, gen_count); 932 if (ACPI_SUCCESS(status)) { 933 /* If we succeeded, burst flag should now be present. */ 934 if (cmd == EC_COMMAND_BURST_ENABLE) { 935 ec_status = EC_GET_CSR(sc); 936 if ((ec_status & EC_FLAG_BURST_MODE) == 0) 937 status = AE_ERROR; 938 } 939 } else 940 device_printf(sc->ec_dev, "EcCommand: no response to %#x\n", cmd); 941 return (status); 942 } 943 944 static ACPI_STATUS 945 EcRead(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data) 946 { 947 ACPI_STATUS status; 948 u_int gen_count; 949 int retry; 950 951 ACPI_SERIAL_ASSERT(ec); 952 CTR1(KTR_ACPI, "ec read from %#x", Address); 953 954 for (retry = 0; retry < 2; retry++) { 955 status = EcCommand(sc, EC_COMMAND_READ); 956 if (ACPI_FAILURE(status)) 957 return (status); 958 959 gen_count = sc->ec_gencount; 960 EC_SET_DATA(sc, Address); 961 status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL, gen_count); 962 if (ACPI_SUCCESS(status)) { 963 *Data = EC_GET_DATA(sc); 964 return (AE_OK); 965 } 966 if (ACPI_FAILURE(EcCheckStatus(sc, "retr_check", 967 EC_EVENT_INPUT_BUFFER_EMPTY))) 968 break; 969 } 970 device_printf(sc->ec_dev, "EcRead: failed waiting to get data\n"); 971 return (status); 972 } 973 974 static ACPI_STATUS 975 EcWrite(struct acpi_ec_softc *sc, UINT8 Address, UINT8 Data) 976 { 977 ACPI_STATUS status; 978 u_int gen_count; 979 980 ACPI_SERIAL_ASSERT(ec); 981 CTR2(KTR_ACPI, "ec write to %#x, data %#x", Address, Data); 982 983 status = EcCommand(sc, EC_COMMAND_WRITE); 984 if (ACPI_FAILURE(status)) 985 return (status); 986 987 gen_count = sc->ec_gencount; 988 EC_SET_DATA(sc, Address); 989 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count); 990 if (ACPI_FAILURE(status)) { 991 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent address\n"); 992 return (status); 993 } 994 995 gen_count = sc->ec_gencount; 996 EC_SET_DATA(sc, Data); 997 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count); 998 if (ACPI_FAILURE(status)) { 999 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent data\n"); 1000 return (status); 1001 } 1002 1003 return (AE_OK); 1004 } 1005