1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2002 Adaptec, Inc. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 /* 33 * CAM front-end for communicating with non-DASD devices 34 */ 35 36 #include "opt_aac.h" 37 38 #include <sys/param.h> 39 #include <sys/systm.h> 40 #include <sys/kernel.h> 41 #include <sys/sysctl.h> 42 #include <sys/lock.h> 43 #include <sys/malloc.h> 44 #include <sys/module.h> 45 #include <sys/mutex.h> 46 47 #include <cam/cam.h> 48 #include <cam/cam_ccb.h> 49 #include <cam/cam_debug.h> 50 #include <cam/cam_periph.h> 51 #include <cam/cam_sim.h> 52 #include <cam/cam_xpt_sim.h> 53 #include <cam/scsi/scsi_all.h> 54 #include <cam/scsi/scsi_message.h> 55 56 #include <sys/bus.h> 57 #include <sys/conf.h> 58 #include <sys/disk.h> 59 60 #include <machine/md_var.h> 61 #include <machine/bus.h> 62 #include <sys/rman.h> 63 64 #include <vm/vm.h> 65 #include <vm/pmap.h> 66 67 #include <dev/aac/aacreg.h> 68 #include <sys/aac_ioctl.h> 69 #include <dev/aac/aacvar.h> 70 71 struct aac_cam { 72 device_t dev; 73 struct aac_sim *inf; 74 struct cam_sim *sim; 75 struct cam_path *path; 76 }; 77 78 static int aac_cam_probe(device_t dev); 79 static int aac_cam_attach(device_t dev); 80 static int aac_cam_detach(device_t dev); 81 static void aac_cam_action(struct cam_sim *, union ccb *); 82 static void aac_cam_poll(struct cam_sim *); 83 static void aac_cam_complete(struct aac_command *); 84 static void aac_cam_rescan(struct aac_softc *sc, uint32_t channel, 85 uint32_t target_id); 86 87 static u_int32_t aac_cam_reset_bus(struct cam_sim *, union ccb *); 88 static u_int32_t aac_cam_abort_ccb(struct cam_sim *, union ccb *); 89 static u_int32_t aac_cam_term_io(struct cam_sim *, union ccb *); 90 91 static devclass_t aac_pass_devclass; 92 93 static device_method_t aac_pass_methods[] = { 94 DEVMETHOD(device_probe, aac_cam_probe), 95 DEVMETHOD(device_attach, aac_cam_attach), 96 DEVMETHOD(device_detach, aac_cam_detach), 97 DEVMETHOD_END 98 }; 99 100 static driver_t aac_pass_driver = { 101 "aacp", 102 aac_pass_methods, 103 sizeof(struct aac_cam) 104 }; 105 106 DRIVER_MODULE(aacp, aac, aac_pass_driver, aac_pass_devclass, NULL, NULL); 107 MODULE_DEPEND(aacp, cam, 1, 1, 1); 108 109 static MALLOC_DEFINE(M_AACCAM, "aaccam", "AAC CAM info"); 110 111 static void 112 aac_cam_rescan(struct aac_softc *sc, uint32_t channel, uint32_t target_id) 113 { 114 union ccb *ccb; 115 struct aac_sim *sim; 116 struct aac_cam *camsc; 117 118 if (target_id == AAC_CAM_TARGET_WILDCARD) 119 target_id = CAM_TARGET_WILDCARD; 120 121 TAILQ_FOREACH(sim, &sc->aac_sim_tqh, sim_link) { 122 camsc = sim->aac_cam; 123 if (camsc == NULL || camsc->inf == NULL || 124 camsc->inf->BusNumber != channel) 125 continue; 126 127 ccb = xpt_alloc_ccb_nowait(); 128 if (ccb == NULL) { 129 device_printf(sc->aac_dev, 130 "Cannot allocate ccb for bus rescan.\n"); 131 return; 132 } 133 134 if (xpt_create_path(&ccb->ccb_h.path, NULL, 135 cam_sim_path(camsc->sim), 136 target_id, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 137 xpt_free_ccb(ccb); 138 device_printf(sc->aac_dev, 139 "Cannot create path for bus rescan.\n"); 140 return; 141 } 142 xpt_rescan(ccb); 143 break; 144 } 145 } 146 147 148 static void 149 aac_cam_event(struct aac_softc *sc, struct aac_event *event, void *arg) 150 { 151 union ccb *ccb; 152 struct aac_cam *camsc; 153 154 switch (event->ev_type) { 155 case AAC_EVENT_CMFREE: 156 ccb = arg; 157 camsc = ccb->ccb_h.sim_priv.entries[0].ptr; 158 free(event, M_AACCAM); 159 xpt_release_simq(camsc->sim, 1); 160 ccb->ccb_h.status = CAM_REQUEUE_REQ; 161 xpt_done(ccb); 162 break; 163 default: 164 device_printf(sc->aac_dev, "unknown event %d in aac_cam\n", 165 event->ev_type); 166 break; 167 } 168 } 169 170 static int 171 aac_cam_probe(device_t dev) 172 { 173 fwprintf(NULL, HBA_FLAGS_DBG_FUNCTION_ENTRY_B, ""); 174 175 return (0); 176 } 177 178 static int 179 aac_cam_detach(device_t dev) 180 { 181 struct aac_softc *sc; 182 struct aac_cam *camsc; 183 fwprintf(NULL, HBA_FLAGS_DBG_FUNCTION_ENTRY_B, ""); 184 185 camsc = (struct aac_cam *)device_get_softc(dev); 186 sc = camsc->inf->aac_sc; 187 camsc->inf->aac_cam = NULL; 188 189 mtx_lock(&sc->aac_io_lock); 190 191 xpt_async(AC_LOST_DEVICE, camsc->path, NULL); 192 xpt_free_path(camsc->path); 193 xpt_bus_deregister(cam_sim_path(camsc->sim)); 194 cam_sim_free(camsc->sim, /*free_devq*/TRUE); 195 196 sc->cam_rescan_cb = NULL; 197 198 mtx_unlock(&sc->aac_io_lock); 199 200 return (0); 201 } 202 203 /* 204 * Register the driver as a CAM SIM 205 */ 206 static int 207 aac_cam_attach(device_t dev) 208 { 209 struct cam_devq *devq; 210 struct cam_sim *sim; 211 struct cam_path *path; 212 struct aac_cam *camsc; 213 struct aac_sim *inf; 214 215 fwprintf(NULL, HBA_FLAGS_DBG_FUNCTION_ENTRY_B, ""); 216 217 camsc = (struct aac_cam *)device_get_softc(dev); 218 inf = (struct aac_sim *)device_get_ivars(dev); 219 camsc->inf = inf; 220 camsc->inf->aac_cam = camsc; 221 222 devq = cam_simq_alloc(inf->TargetsPerBus); 223 if (devq == NULL) 224 return (EIO); 225 226 sim = cam_sim_alloc(aac_cam_action, aac_cam_poll, "aacp", camsc, 227 device_get_unit(dev), &inf->aac_sc->aac_io_lock, 1, 1, devq); 228 if (sim == NULL) { 229 cam_simq_free(devq); 230 return (EIO); 231 } 232 233 /* Since every bus has it's own sim, every bus 'appears' as bus 0 */ 234 mtx_lock(&inf->aac_sc->aac_io_lock); 235 if (xpt_bus_register(sim, dev, 0) != CAM_SUCCESS) { 236 cam_sim_free(sim, TRUE); 237 mtx_unlock(&inf->aac_sc->aac_io_lock); 238 return (EIO); 239 } 240 241 if (xpt_create_path(&path, NULL, cam_sim_path(sim), 242 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 243 xpt_bus_deregister(cam_sim_path(sim)); 244 cam_sim_free(sim, TRUE); 245 mtx_unlock(&inf->aac_sc->aac_io_lock); 246 return (EIO); 247 } 248 inf->aac_sc->cam_rescan_cb = aac_cam_rescan; 249 mtx_unlock(&inf->aac_sc->aac_io_lock); 250 251 camsc->sim = sim; 252 camsc->path = path; 253 254 return (0); 255 } 256 257 static void 258 aac_cam_action(struct cam_sim *sim, union ccb *ccb) 259 { 260 struct aac_cam *camsc; 261 struct aac_softc *sc; 262 struct aac_srb *srb; 263 struct aac_fib *fib; 264 struct aac_command *cm; 265 266 camsc = (struct aac_cam *)cam_sim_softc(sim); 267 sc = camsc->inf->aac_sc; 268 fwprintf(sc, HBA_FLAGS_DBG_FUNCTION_ENTRY_B, ""); 269 270 /* Synchronous ops, and ops that don't require communication with the 271 * controller */ 272 switch(ccb->ccb_h.func_code) { 273 case XPT_SCSI_IO: 274 case XPT_RESET_DEV: 275 /* These are handled down below */ 276 break; 277 case XPT_CALC_GEOMETRY: 278 { 279 struct ccb_calc_geometry *ccg; 280 u_int32_t size_mb; 281 u_int32_t secs_per_cylinder; 282 283 ccg = &ccb->ccg; 284 size_mb = ccg->volume_size / 285 ((1024L * 1024L) / ccg->block_size); 286 if (size_mb >= (2 * 1024)) { /* 2GB */ 287 ccg->heads = 255; 288 ccg->secs_per_track = 63; 289 } else if (size_mb >= (1 * 1024)) { /* 1GB */ 290 ccg->heads = 128; 291 ccg->secs_per_track = 32; 292 } else { 293 ccg->heads = 64; 294 ccg->secs_per_track = 32; 295 } 296 secs_per_cylinder = ccg->heads * ccg->secs_per_track; 297 ccg->cylinders = ccg->volume_size / secs_per_cylinder; 298 299 ccb->ccb_h.status = CAM_REQ_CMP; 300 xpt_done(ccb); 301 return; 302 } 303 case XPT_PATH_INQ: 304 { 305 struct ccb_pathinq *cpi = &ccb->cpi; 306 307 cpi->version_num = 1; 308 cpi->hba_inquiry = PI_WIDE_16; 309 cpi->target_sprt = 0; 310 311 /* 312 * Resetting via the passthrough or parallel bus scan 313 * causes problems. 314 */ 315 cpi->hba_misc = PIM_NOBUSRESET | PIM_SEQSCAN; 316 cpi->hba_eng_cnt = 0; 317 cpi->max_target = camsc->inf->TargetsPerBus; 318 cpi->max_lun = 8; /* Per the controller spec */ 319 cpi->initiator_id = camsc->inf->InitiatorBusId; 320 cpi->bus_id = camsc->inf->BusNumber; 321 cpi->base_transfer_speed = 3300; 322 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 323 strlcpy(cpi->hba_vid, "Adaptec", HBA_IDLEN); 324 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 325 cpi->unit_number = cam_sim_unit(sim); 326 cpi->transport = XPORT_SPI; 327 cpi->transport_version = 2; 328 cpi->protocol = PROTO_SCSI; 329 cpi->protocol_version = SCSI_REV_2; 330 ccb->ccb_h.status = CAM_REQ_CMP; 331 xpt_done(ccb); 332 return; 333 } 334 case XPT_GET_TRAN_SETTINGS: 335 { 336 struct ccb_trans_settings_scsi *scsi = 337 &ccb->cts.proto_specific.scsi; 338 struct ccb_trans_settings_spi *spi = 339 &ccb->cts.xport_specific.spi; 340 ccb->cts.protocol = PROTO_SCSI; 341 ccb->cts.protocol_version = SCSI_REV_2; 342 ccb->cts.transport = XPORT_SPI; 343 ccb->cts.transport_version = 2; 344 if (ccb->ccb_h.target_lun != CAM_LUN_WILDCARD) { 345 scsi->valid = CTS_SCSI_VALID_TQ; 346 spi->valid |= CTS_SPI_VALID_DISC; 347 } else { 348 scsi->valid = 0; 349 } 350 ccb->ccb_h.status = CAM_REQ_CMP; 351 xpt_done(ccb); 352 return; 353 } 354 case XPT_SET_TRAN_SETTINGS: 355 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 356 xpt_done(ccb); 357 return; 358 case XPT_RESET_BUS: 359 if (!(sc->flags & AAC_FLAGS_CAM_NORESET)) { 360 ccb->ccb_h.status = aac_cam_reset_bus(sim, ccb); 361 } else { 362 ccb->ccb_h.status = CAM_REQ_CMP; 363 } 364 xpt_done(ccb); 365 return; 366 case XPT_ABORT: 367 ccb->ccb_h.status = aac_cam_abort_ccb(sim, ccb); 368 xpt_done(ccb); 369 return; 370 case XPT_TERM_IO: 371 ccb->ccb_h.status = aac_cam_term_io(sim, ccb); 372 xpt_done(ccb); 373 return; 374 default: 375 device_printf(sc->aac_dev, "Unsupported command 0x%x\n", 376 ccb->ccb_h.func_code); 377 ccb->ccb_h.status = CAM_PROVIDE_FAIL; 378 xpt_done(ccb); 379 return; 380 } 381 382 /* Async ops that require communcation with the controller */ 383 384 if (aac_alloc_command(sc, &cm)) { 385 struct aac_event *event; 386 387 xpt_freeze_simq(sim, 1); 388 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 389 ccb->ccb_h.sim_priv.entries[0].ptr = camsc; 390 event = malloc(sizeof(struct aac_event), M_AACCAM, 391 M_NOWAIT | M_ZERO); 392 if (event == NULL) { 393 device_printf(sc->aac_dev, 394 "Warning, out of memory for event\n"); 395 return; 396 } 397 event->ev_callback = aac_cam_event; 398 event->ev_arg = ccb; 399 event->ev_type = AAC_EVENT_CMFREE; 400 aac_add_event(sc, event); 401 return; 402 } 403 404 fib = cm->cm_fib; 405 srb = (struct aac_srb *)&fib->data[0]; 406 cm->cm_datalen = 0; 407 408 switch (ccb->ccb_h.flags & CAM_DIR_MASK) { 409 case CAM_DIR_IN: 410 srb->flags = AAC_SRB_FLAGS_DATA_IN; 411 cm->cm_flags |= AAC_CMD_DATAIN; 412 break; 413 case CAM_DIR_OUT: 414 srb->flags = AAC_SRB_FLAGS_DATA_OUT; 415 cm->cm_flags |= AAC_CMD_DATAOUT; 416 break; 417 case CAM_DIR_NONE: 418 srb->flags = AAC_SRB_FLAGS_NO_DATA_XFER; 419 break; 420 default: 421 srb->flags = AAC_SRB_FLAGS_UNSPECIFIED_DIRECTION; 422 cm->cm_flags |= AAC_CMD_DATAIN | AAC_CMD_DATAOUT; 423 break; 424 } 425 426 switch(ccb->ccb_h.func_code) { 427 case XPT_SCSI_IO: 428 { 429 struct ccb_scsiio *csio = &ccb->csio; 430 431 srb->function = AAC_SRB_FUNC_EXECUTE_SCSI; 432 433 /* 434 * Copy the CDB into the SRB. It's only 6-16 bytes, 435 * so a copy is not too expensive. 436 */ 437 srb->cdb_len = csio->cdb_len; 438 if (ccb->ccb_h.flags & CAM_CDB_POINTER) 439 bcopy(csio->cdb_io.cdb_ptr, (u_int8_t *)&srb->cdb[0], 440 srb->cdb_len); 441 else 442 bcopy(csio->cdb_io.cdb_bytes, (u_int8_t *)&srb->cdb[0], 443 srb->cdb_len); 444 445 /* Set command */ 446 fib->Header.Command = (sc->flags & AAC_FLAGS_SG_64BIT) ? 447 ScsiPortCommandU64 : ScsiPortCommand; 448 449 /* Map the s/g list. XXX 32bit addresses only! */ 450 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 451 switch ((ccb->ccb_h.flags & CAM_DATA_MASK)) { 452 case CAM_DATA_VADDR: 453 srb->data_len = csio->dxfer_len; 454 /* 455 * Arrange things so that the S/G 456 * map will get set up automagically 457 */ 458 cm->cm_data = (void *)csio->data_ptr; 459 cm->cm_datalen = csio->dxfer_len; 460 cm->cm_sgtable = &srb->sg_map; 461 break; 462 case CAM_DATA_PADDR: 463 /* Send a 32bit command */ 464 fib->Header.Command = ScsiPortCommand; 465 srb->sg_map.SgCount = 1; 466 srb->sg_map.SgEntry[0].SgAddress = 467 (uint32_t)(uintptr_t)csio->data_ptr; 468 srb->sg_map.SgEntry[0].SgByteCount = 469 csio->dxfer_len; 470 srb->data_len = csio->dxfer_len; 471 break; 472 default: 473 /* XXX Need to handle multiple s/g elements */ 474 panic("aac_cam: multiple s/g elements"); 475 } 476 } else { 477 srb->sg_map.SgCount = 0; 478 srb->sg_map.SgEntry[0].SgByteCount = 0; 479 srb->data_len = 0; 480 } 481 482 break; 483 } 484 case XPT_RESET_DEV: 485 if (!(sc->flags & AAC_FLAGS_CAM_NORESET)) { 486 srb->function = AAC_SRB_FUNC_RESET_DEVICE; 487 break; 488 } else { 489 ccb->ccb_h.status = CAM_REQ_CMP; 490 xpt_done(ccb); 491 return; 492 } 493 default: 494 break; 495 } 496 497 srb->bus = camsc->inf->BusNumber; /* Bus number relative to the card */ 498 srb->target = ccb->ccb_h.target_id; 499 srb->lun = ccb->ccb_h.target_lun; 500 srb->timeout = ccb->ccb_h.timeout; /* XXX */ 501 srb->retry_limit = 0; 502 503 cm->cm_complete = aac_cam_complete; 504 cm->cm_private = ccb; 505 cm->cm_timestamp = time_uptime; 506 507 fib->Header.XferState = 508 AAC_FIBSTATE_HOSTOWNED | 509 AAC_FIBSTATE_INITIALISED | 510 AAC_FIBSTATE_FROMHOST | 511 AAC_FIBSTATE_REXPECTED | 512 AAC_FIBSTATE_NORM; 513 fib->Header.Size = sizeof(struct aac_fib_header) + 514 sizeof(struct aac_srb); 515 516 aac_enqueue_ready(cm); 517 aac_startio(cm->cm_sc); 518 } 519 520 static void 521 aac_cam_poll(struct cam_sim *sim) 522 { 523 /* 524 * Pinging the interrupt routine isn't very safe, nor is it 525 * really necessary. Do nothing. 526 */ 527 } 528 529 static void 530 aac_cam_fix_inquiry(struct aac_softc *sc, union ccb *ccb) 531 { 532 struct scsi_inquiry_data *inq; 533 uint8_t *data; 534 uint8_t device, qual; 535 536 /* If this is an inquiry command, fake things out */ 537 if (ccb->ccb_h.flags & CAM_CDB_POINTER) 538 data = ccb->csio.cdb_io.cdb_ptr; 539 else 540 data = ccb->csio.cdb_io.cdb_bytes; 541 542 if (data[0] != INQUIRY) 543 return; 544 545 if (ccb->ccb_h.status == CAM_REQ_CMP) { 546 inq = (struct scsi_inquiry_data *)ccb->csio.data_ptr; 547 device = SID_TYPE(inq); 548 qual = SID_QUAL(inq); 549 550 /* 551 * We want DASD and PROC devices to only be 552 * visible through the pass device. 553 */ 554 if (((device == T_DIRECT) || 555 (device == T_PROCESSOR) || 556 (sc->flags & AAC_FLAGS_CAM_PASSONLY))) { 557 /* 558 * Some aac(4) adapters will always report that a direct 559 * access device is offline in response to a INQUIRY 560 * command that does not retrieve vital product data. 561 * Force the qualifier to connected so that upper layers 562 * correctly recognize that a disk is present. 563 */ 564 if ((data[1] & SI_EVPD) == 0 && device == T_DIRECT && 565 qual == SID_QUAL_LU_OFFLINE) 566 qual = SID_QUAL_LU_CONNECTED; 567 ccb->csio.data_ptr[0] = (qual << 5) | T_NODEVICE; 568 } 569 } else if (ccb->ccb_h.status == CAM_SEL_TIMEOUT && 570 ccb->ccb_h.target_lun != 0) { 571 /* fix for INQUIRYs on Lun>0 */ 572 ccb->ccb_h.status = CAM_DEV_NOT_THERE; 573 } 574 } 575 576 static void 577 aac_cam_complete(struct aac_command *cm) 578 { 579 union ccb *ccb; 580 struct aac_srb_response *srbr; 581 struct aac_softc *sc; 582 int sense_returned; 583 584 sc = cm->cm_sc; 585 fwprintf(sc, HBA_FLAGS_DBG_FUNCTION_ENTRY_B, ""); 586 ccb = cm->cm_private; 587 srbr = (struct aac_srb_response *)&cm->cm_fib->data[0]; 588 589 if (srbr->fib_status != 0) { 590 device_printf(sc->aac_dev, "Passthru FIB failed!\n"); 591 ccb->ccb_h.status = CAM_REQ_ABORTED; 592 } else { 593 /* 594 * The SRB error codes just happen to match the CAM error 595 * codes. How convenient! 596 */ 597 ccb->ccb_h.status = srbr->srb_status; 598 599 /* Take care of SCSI_IO ops. */ 600 if (ccb->ccb_h.func_code == XPT_SCSI_IO) { 601 ccb->csio.scsi_status = srbr->scsi_status; 602 603 /* Take care of autosense */ 604 if (srbr->sense_len) { 605 sense_returned = srbr->sense_len; 606 if (sense_returned < ccb->csio.sense_len) 607 ccb->csio.sense_resid = 608 ccb->csio.sense_len - 609 sense_returned; 610 else 611 ccb->csio.sense_resid = 0; 612 bzero(&ccb->csio.sense_data, 613 sizeof(struct scsi_sense_data)); 614 bcopy(&srbr->sense[0], &ccb->csio.sense_data, 615 min(ccb->csio.sense_len, sense_returned)); 616 ccb->ccb_h.status |= CAM_AUTOSNS_VALID; 617 // scsi_sense_print(&ccb->csio); 618 } 619 620 aac_cam_fix_inquiry(sc, ccb); 621 } 622 } 623 624 aac_release_command(cm); 625 xpt_done(ccb); 626 } 627 628 static u_int32_t 629 aac_cam_reset_bus(struct cam_sim *sim, union ccb *ccb) 630 { 631 struct aac_fib *fib; 632 struct aac_softc *sc; 633 struct aac_cam *camsc; 634 struct aac_vmioctl *vmi; 635 struct aac_resetbus *rbc; 636 int e; 637 638 camsc = (struct aac_cam *)cam_sim_softc(sim); 639 sc = camsc->inf->aac_sc; 640 641 if (sc == NULL) { 642 printf("aac: Null sc?\n"); 643 return (CAM_REQ_ABORTED); 644 } 645 646 aac_alloc_sync_fib(sc, &fib); 647 648 vmi = (struct aac_vmioctl *)&fib->data[0]; 649 bzero(vmi, sizeof(struct aac_vmioctl)); 650 651 vmi->Command = VM_Ioctl; 652 vmi->ObjType = FT_DRIVE; 653 vmi->MethId = sc->scsi_method_id; 654 vmi->ObjId = 0; 655 vmi->IoctlCmd = ResetBus; 656 657 rbc = (struct aac_resetbus *)&vmi->IoctlBuf[0]; 658 rbc->BusNumber = camsc->inf->BusNumber; 659 660 e = aac_sync_fib(sc, ContainerCommand, 0, fib, 661 sizeof(struct aac_vmioctl)); 662 if (e) { 663 device_printf(sc->aac_dev,"Error %d sending ResetBus command\n", 664 e); 665 aac_release_sync_fib(sc); 666 return (CAM_REQ_ABORTED); 667 } 668 669 aac_release_sync_fib(sc); 670 return (CAM_REQ_CMP); 671 } 672 673 static u_int32_t 674 aac_cam_abort_ccb(struct cam_sim *sim, union ccb *ccb) 675 { 676 return (CAM_UA_ABORT); 677 } 678 679 static u_int32_t 680 aac_cam_term_io(struct cam_sim *sim, union ccb *ccb) 681 { 682 return (CAM_UA_TERMIO); 683 } 684