1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. 23 * Copyright (c) 2011, 2019 by Delphix. All rights reserved. 24 * Copyright 2015 Nexenta Systems, Inc. All rights reserved. 25 * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved. 26 * Copyright 2013 Saso Kiselkov. All rights reserved. 27 * Copyright (c) 2017 Datto Inc. 28 * Copyright (c) 2017, Intel Corporation. 29 * Copyright (c) 2019, loli10K <ezomori.nozomu@gmail.com>. All rights reserved. 30 */ 31 32 #include <sys/zfs_context.h> 33 #include <sys/spa_impl.h> 34 #include <sys/zio.h> 35 #include <sys/zio_checksum.h> 36 #include <sys/zio_compress.h> 37 #include <sys/dmu.h> 38 #include <sys/dmu_tx.h> 39 #include <sys/zap.h> 40 #include <sys/zil.h> 41 #include <sys/vdev_impl.h> 42 #include <sys/vdev_initialize.h> 43 #include <sys/vdev_trim.h> 44 #include <sys/vdev_file.h> 45 #include <sys/vdev_raidz.h> 46 #include <sys/metaslab.h> 47 #include <sys/uberblock_impl.h> 48 #include <sys/txg.h> 49 #include <sys/avl.h> 50 #include <sys/unique.h> 51 #include <sys/dsl_pool.h> 52 #include <sys/dsl_dir.h> 53 #include <sys/dsl_prop.h> 54 #include <sys/fm/util.h> 55 #include <sys/dsl_scan.h> 56 #include <sys/fs/zfs.h> 57 #include <sys/metaslab_impl.h> 58 #include <sys/arc.h> 59 #include <sys/ddt.h> 60 #include <sys/kstat.h> 61 #include "zfs_prop.h" 62 #include <sys/btree.h> 63 #include <sys/zfeature.h> 64 #include <sys/qat.h> 65 #include <sys/zstd/zstd.h> 66 67 /* 68 * SPA locking 69 * 70 * There are three basic locks for managing spa_t structures: 71 * 72 * spa_namespace_lock (global mutex) 73 * 74 * This lock must be acquired to do any of the following: 75 * 76 * - Lookup a spa_t by name 77 * - Add or remove a spa_t from the namespace 78 * - Increase spa_refcount from non-zero 79 * - Check if spa_refcount is zero 80 * - Rename a spa_t 81 * - add/remove/attach/detach devices 82 * - Held for the duration of create/destroy/import/export 83 * 84 * It does not need to handle recursion. A create or destroy may 85 * reference objects (files or zvols) in other pools, but by 86 * definition they must have an existing reference, and will never need 87 * to lookup a spa_t by name. 88 * 89 * spa_refcount (per-spa zfs_refcount_t protected by mutex) 90 * 91 * This reference count keep track of any active users of the spa_t. The 92 * spa_t cannot be destroyed or freed while this is non-zero. Internally, 93 * the refcount is never really 'zero' - opening a pool implicitly keeps 94 * some references in the DMU. Internally we check against spa_minref, but 95 * present the image of a zero/non-zero value to consumers. 96 * 97 * spa_config_lock[] (per-spa array of rwlocks) 98 * 99 * This protects the spa_t from config changes, and must be held in 100 * the following circumstances: 101 * 102 * - RW_READER to perform I/O to the spa 103 * - RW_WRITER to change the vdev config 104 * 105 * The locking order is fairly straightforward: 106 * 107 * spa_namespace_lock -> spa_refcount 108 * 109 * The namespace lock must be acquired to increase the refcount from 0 110 * or to check if it is zero. 111 * 112 * spa_refcount -> spa_config_lock[] 113 * 114 * There must be at least one valid reference on the spa_t to acquire 115 * the config lock. 116 * 117 * spa_namespace_lock -> spa_config_lock[] 118 * 119 * The namespace lock must always be taken before the config lock. 120 * 121 * 122 * The spa_namespace_lock can be acquired directly and is globally visible. 123 * 124 * The namespace is manipulated using the following functions, all of which 125 * require the spa_namespace_lock to be held. 126 * 127 * spa_lookup() Lookup a spa_t by name. 128 * 129 * spa_add() Create a new spa_t in the namespace. 130 * 131 * spa_remove() Remove a spa_t from the namespace. This also 132 * frees up any memory associated with the spa_t. 133 * 134 * spa_next() Returns the next spa_t in the system, or the 135 * first if NULL is passed. 136 * 137 * spa_evict_all() Shutdown and remove all spa_t structures in 138 * the system. 139 * 140 * spa_guid_exists() Determine whether a pool/device guid exists. 141 * 142 * The spa_refcount is manipulated using the following functions: 143 * 144 * spa_open_ref() Adds a reference to the given spa_t. Must be 145 * called with spa_namespace_lock held if the 146 * refcount is currently zero. 147 * 148 * spa_close() Remove a reference from the spa_t. This will 149 * not free the spa_t or remove it from the 150 * namespace. No locking is required. 151 * 152 * spa_refcount_zero() Returns true if the refcount is currently 153 * zero. Must be called with spa_namespace_lock 154 * held. 155 * 156 * The spa_config_lock[] is an array of rwlocks, ordered as follows: 157 * SCL_CONFIG > SCL_STATE > SCL_ALLOC > SCL_ZIO > SCL_FREE > SCL_VDEV. 158 * spa_config_lock[] is manipulated with spa_config_{enter,exit,held}(). 159 * 160 * To read the configuration, it suffices to hold one of these locks as reader. 161 * To modify the configuration, you must hold all locks as writer. To modify 162 * vdev state without altering the vdev tree's topology (e.g. online/offline), 163 * you must hold SCL_STATE and SCL_ZIO as writer. 164 * 165 * We use these distinct config locks to avoid recursive lock entry. 166 * For example, spa_sync() (which holds SCL_CONFIG as reader) induces 167 * block allocations (SCL_ALLOC), which may require reading space maps 168 * from disk (dmu_read() -> zio_read() -> SCL_ZIO). 169 * 170 * The spa config locks cannot be normal rwlocks because we need the 171 * ability to hand off ownership. For example, SCL_ZIO is acquired 172 * by the issuing thread and later released by an interrupt thread. 173 * They do, however, obey the usual write-wanted semantics to prevent 174 * writer (i.e. system administrator) starvation. 175 * 176 * The lock acquisition rules are as follows: 177 * 178 * SCL_CONFIG 179 * Protects changes to the vdev tree topology, such as vdev 180 * add/remove/attach/detach. Protects the dirty config list 181 * (spa_config_dirty_list) and the set of spares and l2arc devices. 182 * 183 * SCL_STATE 184 * Protects changes to pool state and vdev state, such as vdev 185 * online/offline/fault/degrade/clear. Protects the dirty state list 186 * (spa_state_dirty_list) and global pool state (spa_state). 187 * 188 * SCL_ALLOC 189 * Protects changes to metaslab groups and classes. 190 * Held as reader by metaslab_alloc() and metaslab_claim(). 191 * 192 * SCL_ZIO 193 * Held by bp-level zios (those which have no io_vd upon entry) 194 * to prevent changes to the vdev tree. The bp-level zio implicitly 195 * protects all of its vdev child zios, which do not hold SCL_ZIO. 196 * 197 * SCL_FREE 198 * Protects changes to metaslab groups and classes. 199 * Held as reader by metaslab_free(). SCL_FREE is distinct from 200 * SCL_ALLOC, and lower than SCL_ZIO, so that we can safely free 201 * blocks in zio_done() while another i/o that holds either 202 * SCL_ALLOC or SCL_ZIO is waiting for this i/o to complete. 203 * 204 * SCL_VDEV 205 * Held as reader to prevent changes to the vdev tree during trivial 206 * inquiries such as bp_get_dsize(). SCL_VDEV is distinct from the 207 * other locks, and lower than all of them, to ensure that it's safe 208 * to acquire regardless of caller context. 209 * 210 * In addition, the following rules apply: 211 * 212 * (a) spa_props_lock protects pool properties, spa_config and spa_config_list. 213 * The lock ordering is SCL_CONFIG > spa_props_lock. 214 * 215 * (b) I/O operations on leaf vdevs. For any zio operation that takes 216 * an explicit vdev_t argument -- such as zio_ioctl(), zio_read_phys(), 217 * or zio_write_phys() -- the caller must ensure that the config cannot 218 * cannot change in the interim, and that the vdev cannot be reopened. 219 * SCL_STATE as reader suffices for both. 220 * 221 * The vdev configuration is protected by spa_vdev_enter() / spa_vdev_exit(). 222 * 223 * spa_vdev_enter() Acquire the namespace lock and the config lock 224 * for writing. 225 * 226 * spa_vdev_exit() Release the config lock, wait for all I/O 227 * to complete, sync the updated configs to the 228 * cache, and release the namespace lock. 229 * 230 * vdev state is protected by spa_vdev_state_enter() / spa_vdev_state_exit(). 231 * Like spa_vdev_enter/exit, these are convenience wrappers -- the actual 232 * locking is, always, based on spa_namespace_lock and spa_config_lock[]. 233 */ 234 235 static avl_tree_t spa_namespace_avl; 236 kmutex_t spa_namespace_lock; 237 static kcondvar_t spa_namespace_cv; 238 int spa_max_replication_override = SPA_DVAS_PER_BP; 239 240 static kmutex_t spa_spare_lock; 241 static avl_tree_t spa_spare_avl; 242 static kmutex_t spa_l2cache_lock; 243 static avl_tree_t spa_l2cache_avl; 244 245 kmem_cache_t *spa_buffer_pool; 246 spa_mode_t spa_mode_global = SPA_MODE_UNINIT; 247 248 #ifdef ZFS_DEBUG 249 /* 250 * Everything except dprintf, set_error, spa, and indirect_remap is on 251 * by default in debug builds. 252 */ 253 int zfs_flags = ~(ZFS_DEBUG_DPRINTF | ZFS_DEBUG_SET_ERROR | 254 ZFS_DEBUG_INDIRECT_REMAP); 255 #else 256 int zfs_flags = 0; 257 #endif 258 259 /* 260 * zfs_recover can be set to nonzero to attempt to recover from 261 * otherwise-fatal errors, typically caused by on-disk corruption. When 262 * set, calls to zfs_panic_recover() will turn into warning messages. 263 * This should only be used as a last resort, as it typically results 264 * in leaked space, or worse. 265 */ 266 int zfs_recover = B_FALSE; 267 268 /* 269 * If destroy encounters an EIO while reading metadata (e.g. indirect 270 * blocks), space referenced by the missing metadata can not be freed. 271 * Normally this causes the background destroy to become "stalled", as 272 * it is unable to make forward progress. While in this stalled state, 273 * all remaining space to free from the error-encountering filesystem is 274 * "temporarily leaked". Set this flag to cause it to ignore the EIO, 275 * permanently leak the space from indirect blocks that can not be read, 276 * and continue to free everything else that it can. 277 * 278 * The default, "stalling" behavior is useful if the storage partially 279 * fails (i.e. some but not all i/os fail), and then later recovers. In 280 * this case, we will be able to continue pool operations while it is 281 * partially failed, and when it recovers, we can continue to free the 282 * space, with no leaks. However, note that this case is actually 283 * fairly rare. 284 * 285 * Typically pools either (a) fail completely (but perhaps temporarily, 286 * e.g. a top-level vdev going offline), or (b) have localized, 287 * permanent errors (e.g. disk returns the wrong data due to bit flip or 288 * firmware bug). In case (a), this setting does not matter because the 289 * pool will be suspended and the sync thread will not be able to make 290 * forward progress regardless. In case (b), because the error is 291 * permanent, the best we can do is leak the minimum amount of space, 292 * which is what setting this flag will do. Therefore, it is reasonable 293 * for this flag to normally be set, but we chose the more conservative 294 * approach of not setting it, so that there is no possibility of 295 * leaking space in the "partial temporary" failure case. 296 */ 297 int zfs_free_leak_on_eio = B_FALSE; 298 299 /* 300 * Expiration time in milliseconds. This value has two meanings. First it is 301 * used to determine when the spa_deadman() logic should fire. By default the 302 * spa_deadman() will fire if spa_sync() has not completed in 600 seconds. 303 * Secondly, the value determines if an I/O is considered "hung". Any I/O that 304 * has not completed in zfs_deadman_synctime_ms is considered "hung" resulting 305 * in one of three behaviors controlled by zfs_deadman_failmode. 306 */ 307 unsigned long zfs_deadman_synctime_ms = 600000UL; 308 309 /* 310 * This value controls the maximum amount of time zio_wait() will block for an 311 * outstanding IO. By default this is 300 seconds at which point the "hung" 312 * behavior will be applied as described for zfs_deadman_synctime_ms. 313 */ 314 unsigned long zfs_deadman_ziotime_ms = 300000UL; 315 316 /* 317 * Check time in milliseconds. This defines the frequency at which we check 318 * for hung I/O. 319 */ 320 unsigned long zfs_deadman_checktime_ms = 60000UL; 321 322 /* 323 * By default the deadman is enabled. 324 */ 325 int zfs_deadman_enabled = 1; 326 327 /* 328 * Controls the behavior of the deadman when it detects a "hung" I/O. 329 * Valid values are zfs_deadman_failmode=<wait|continue|panic>. 330 * 331 * wait - Wait for the "hung" I/O (default) 332 * continue - Attempt to recover from a "hung" I/O 333 * panic - Panic the system 334 */ 335 char *zfs_deadman_failmode = "wait"; 336 337 /* 338 * The worst case is single-sector max-parity RAID-Z blocks, in which 339 * case the space requirement is exactly (VDEV_RAIDZ_MAXPARITY + 1) 340 * times the size; so just assume that. Add to this the fact that 341 * we can have up to 3 DVAs per bp, and one more factor of 2 because 342 * the block may be dittoed with up to 3 DVAs by ddt_sync(). All together, 343 * the worst case is: 344 * (VDEV_RAIDZ_MAXPARITY + 1) * SPA_DVAS_PER_BP * 2 == 24 345 */ 346 int spa_asize_inflation = 24; 347 348 /* 349 * Normally, we don't allow the last 3.2% (1/(2^spa_slop_shift)) of space in 350 * the pool to be consumed. This ensures that we don't run the pool 351 * completely out of space, due to unaccounted changes (e.g. to the MOS). 352 * It also limits the worst-case time to allocate space. If we have 353 * less than this amount of free space, most ZPL operations (e.g. write, 354 * create) will return ENOSPC. 355 * 356 * Certain operations (e.g. file removal, most administrative actions) can 357 * use half the slop space. They will only return ENOSPC if less than half 358 * the slop space is free. Typically, once the pool has less than the slop 359 * space free, the user will use these operations to free up space in the pool. 360 * These are the operations that call dsl_pool_adjustedsize() with the netfree 361 * argument set to TRUE. 362 * 363 * Operations that are almost guaranteed to free up space in the absence of 364 * a pool checkpoint can use up to three quarters of the slop space 365 * (e.g zfs destroy). 366 * 367 * A very restricted set of operations are always permitted, regardless of 368 * the amount of free space. These are the operations that call 369 * dsl_sync_task(ZFS_SPACE_CHECK_NONE). If these operations result in a net 370 * increase in the amount of space used, it is possible to run the pool 371 * completely out of space, causing it to be permanently read-only. 372 * 373 * Note that on very small pools, the slop space will be larger than 374 * 3.2%, in an effort to have it be at least spa_min_slop (128MB), 375 * but we never allow it to be more than half the pool size. 376 * 377 * See also the comments in zfs_space_check_t. 378 */ 379 int spa_slop_shift = 5; 380 uint64_t spa_min_slop = 128 * 1024 * 1024; 381 int spa_allocators = 4; 382 383 384 /*PRINTFLIKE2*/ 385 void 386 spa_load_failed(spa_t *spa, const char *fmt, ...) 387 { 388 va_list adx; 389 char buf[256]; 390 391 va_start(adx, fmt); 392 (void) vsnprintf(buf, sizeof (buf), fmt, adx); 393 va_end(adx); 394 395 zfs_dbgmsg("spa_load(%s, config %s): FAILED: %s", spa->spa_name, 396 spa->spa_trust_config ? "trusted" : "untrusted", buf); 397 } 398 399 /*PRINTFLIKE2*/ 400 void 401 spa_load_note(spa_t *spa, const char *fmt, ...) 402 { 403 va_list adx; 404 char buf[256]; 405 406 va_start(adx, fmt); 407 (void) vsnprintf(buf, sizeof (buf), fmt, adx); 408 va_end(adx); 409 410 zfs_dbgmsg("spa_load(%s, config %s): %s", spa->spa_name, 411 spa->spa_trust_config ? "trusted" : "untrusted", buf); 412 } 413 414 /* 415 * By default dedup and user data indirects land in the special class 416 */ 417 int zfs_ddt_data_is_special = B_TRUE; 418 int zfs_user_indirect_is_special = B_TRUE; 419 420 /* 421 * The percentage of special class final space reserved for metadata only. 422 * Once we allocate 100 - zfs_special_class_metadata_reserve_pct we only 423 * let metadata into the class. 424 */ 425 int zfs_special_class_metadata_reserve_pct = 25; 426 427 /* 428 * ========================================================================== 429 * SPA config locking 430 * ========================================================================== 431 */ 432 static void 433 spa_config_lock_init(spa_t *spa) 434 { 435 for (int i = 0; i < SCL_LOCKS; i++) { 436 spa_config_lock_t *scl = &spa->spa_config_lock[i]; 437 mutex_init(&scl->scl_lock, NULL, MUTEX_DEFAULT, NULL); 438 cv_init(&scl->scl_cv, NULL, CV_DEFAULT, NULL); 439 zfs_refcount_create_untracked(&scl->scl_count); 440 scl->scl_writer = NULL; 441 scl->scl_write_wanted = 0; 442 } 443 } 444 445 static void 446 spa_config_lock_destroy(spa_t *spa) 447 { 448 for (int i = 0; i < SCL_LOCKS; i++) { 449 spa_config_lock_t *scl = &spa->spa_config_lock[i]; 450 mutex_destroy(&scl->scl_lock); 451 cv_destroy(&scl->scl_cv); 452 zfs_refcount_destroy(&scl->scl_count); 453 ASSERT(scl->scl_writer == NULL); 454 ASSERT(scl->scl_write_wanted == 0); 455 } 456 } 457 458 int 459 spa_config_tryenter(spa_t *spa, int locks, void *tag, krw_t rw) 460 { 461 for (int i = 0; i < SCL_LOCKS; i++) { 462 spa_config_lock_t *scl = &spa->spa_config_lock[i]; 463 if (!(locks & (1 << i))) 464 continue; 465 mutex_enter(&scl->scl_lock); 466 if (rw == RW_READER) { 467 if (scl->scl_writer || scl->scl_write_wanted) { 468 mutex_exit(&scl->scl_lock); 469 spa_config_exit(spa, locks & ((1 << i) - 1), 470 tag); 471 return (0); 472 } 473 } else { 474 ASSERT(scl->scl_writer != curthread); 475 if (!zfs_refcount_is_zero(&scl->scl_count)) { 476 mutex_exit(&scl->scl_lock); 477 spa_config_exit(spa, locks & ((1 << i) - 1), 478 tag); 479 return (0); 480 } 481 scl->scl_writer = curthread; 482 } 483 (void) zfs_refcount_add(&scl->scl_count, tag); 484 mutex_exit(&scl->scl_lock); 485 } 486 return (1); 487 } 488 489 void 490 spa_config_enter(spa_t *spa, int locks, const void *tag, krw_t rw) 491 { 492 int wlocks_held = 0; 493 494 ASSERT3U(SCL_LOCKS, <, sizeof (wlocks_held) * NBBY); 495 496 for (int i = 0; i < SCL_LOCKS; i++) { 497 spa_config_lock_t *scl = &spa->spa_config_lock[i]; 498 if (scl->scl_writer == curthread) 499 wlocks_held |= (1 << i); 500 if (!(locks & (1 << i))) 501 continue; 502 mutex_enter(&scl->scl_lock); 503 if (rw == RW_READER) { 504 while (scl->scl_writer || scl->scl_write_wanted) { 505 cv_wait(&scl->scl_cv, &scl->scl_lock); 506 } 507 } else { 508 ASSERT(scl->scl_writer != curthread); 509 while (!zfs_refcount_is_zero(&scl->scl_count)) { 510 scl->scl_write_wanted++; 511 cv_wait(&scl->scl_cv, &scl->scl_lock); 512 scl->scl_write_wanted--; 513 } 514 scl->scl_writer = curthread; 515 } 516 (void) zfs_refcount_add(&scl->scl_count, tag); 517 mutex_exit(&scl->scl_lock); 518 } 519 ASSERT3U(wlocks_held, <=, locks); 520 } 521 522 void 523 spa_config_exit(spa_t *spa, int locks, const void *tag) 524 { 525 for (int i = SCL_LOCKS - 1; i >= 0; i--) { 526 spa_config_lock_t *scl = &spa->spa_config_lock[i]; 527 if (!(locks & (1 << i))) 528 continue; 529 mutex_enter(&scl->scl_lock); 530 ASSERT(!zfs_refcount_is_zero(&scl->scl_count)); 531 if (zfs_refcount_remove(&scl->scl_count, tag) == 0) { 532 ASSERT(scl->scl_writer == NULL || 533 scl->scl_writer == curthread); 534 scl->scl_writer = NULL; /* OK in either case */ 535 cv_broadcast(&scl->scl_cv); 536 } 537 mutex_exit(&scl->scl_lock); 538 } 539 } 540 541 int 542 spa_config_held(spa_t *spa, int locks, krw_t rw) 543 { 544 int locks_held = 0; 545 546 for (int i = 0; i < SCL_LOCKS; i++) { 547 spa_config_lock_t *scl = &spa->spa_config_lock[i]; 548 if (!(locks & (1 << i))) 549 continue; 550 if ((rw == RW_READER && 551 !zfs_refcount_is_zero(&scl->scl_count)) || 552 (rw == RW_WRITER && scl->scl_writer == curthread)) 553 locks_held |= 1 << i; 554 } 555 556 return (locks_held); 557 } 558 559 /* 560 * ========================================================================== 561 * SPA namespace functions 562 * ========================================================================== 563 */ 564 565 /* 566 * Lookup the named spa_t in the AVL tree. The spa_namespace_lock must be held. 567 * Returns NULL if no matching spa_t is found. 568 */ 569 spa_t * 570 spa_lookup(const char *name) 571 { 572 static spa_t search; /* spa_t is large; don't allocate on stack */ 573 spa_t *spa; 574 avl_index_t where; 575 char *cp; 576 577 ASSERT(MUTEX_HELD(&spa_namespace_lock)); 578 579 (void) strlcpy(search.spa_name, name, sizeof (search.spa_name)); 580 581 /* 582 * If it's a full dataset name, figure out the pool name and 583 * just use that. 584 */ 585 cp = strpbrk(search.spa_name, "/@#"); 586 if (cp != NULL) 587 *cp = '\0'; 588 589 spa = avl_find(&spa_namespace_avl, &search, &where); 590 591 return (spa); 592 } 593 594 /* 595 * Fires when spa_sync has not completed within zfs_deadman_synctime_ms. 596 * If the zfs_deadman_enabled flag is set then it inspects all vdev queues 597 * looking for potentially hung I/Os. 598 */ 599 void 600 spa_deadman(void *arg) 601 { 602 spa_t *spa = arg; 603 604 /* Disable the deadman if the pool is suspended. */ 605 if (spa_suspended(spa)) 606 return; 607 608 zfs_dbgmsg("slow spa_sync: started %llu seconds ago, calls %llu", 609 (gethrtime() - spa->spa_sync_starttime) / NANOSEC, 610 ++spa->spa_deadman_calls); 611 if (zfs_deadman_enabled) 612 vdev_deadman(spa->spa_root_vdev, FTAG); 613 614 spa->spa_deadman_tqid = taskq_dispatch_delay(system_delay_taskq, 615 spa_deadman, spa, TQ_SLEEP, ddi_get_lbolt() + 616 MSEC_TO_TICK(zfs_deadman_checktime_ms)); 617 } 618 619 static int 620 spa_log_sm_sort_by_txg(const void *va, const void *vb) 621 { 622 const spa_log_sm_t *a = va; 623 const spa_log_sm_t *b = vb; 624 625 return (TREE_CMP(a->sls_txg, b->sls_txg)); 626 } 627 628 /* 629 * Create an uninitialized spa_t with the given name. Requires 630 * spa_namespace_lock. The caller must ensure that the spa_t doesn't already 631 * exist by calling spa_lookup() first. 632 */ 633 spa_t * 634 spa_add(const char *name, nvlist_t *config, const char *altroot) 635 { 636 spa_t *spa; 637 spa_config_dirent_t *dp; 638 639 ASSERT(MUTEX_HELD(&spa_namespace_lock)); 640 641 spa = kmem_zalloc(sizeof (spa_t), KM_SLEEP); 642 643 mutex_init(&spa->spa_async_lock, NULL, MUTEX_DEFAULT, NULL); 644 mutex_init(&spa->spa_errlist_lock, NULL, MUTEX_DEFAULT, NULL); 645 mutex_init(&spa->spa_errlog_lock, NULL, MUTEX_DEFAULT, NULL); 646 mutex_init(&spa->spa_evicting_os_lock, NULL, MUTEX_DEFAULT, NULL); 647 mutex_init(&spa->spa_history_lock, NULL, MUTEX_DEFAULT, NULL); 648 mutex_init(&spa->spa_proc_lock, NULL, MUTEX_DEFAULT, NULL); 649 mutex_init(&spa->spa_props_lock, NULL, MUTEX_DEFAULT, NULL); 650 mutex_init(&spa->spa_cksum_tmpls_lock, NULL, MUTEX_DEFAULT, NULL); 651 mutex_init(&spa->spa_scrub_lock, NULL, MUTEX_DEFAULT, NULL); 652 mutex_init(&spa->spa_suspend_lock, NULL, MUTEX_DEFAULT, NULL); 653 mutex_init(&spa->spa_vdev_top_lock, NULL, MUTEX_DEFAULT, NULL); 654 mutex_init(&spa->spa_feat_stats_lock, NULL, MUTEX_DEFAULT, NULL); 655 mutex_init(&spa->spa_flushed_ms_lock, NULL, MUTEX_DEFAULT, NULL); 656 mutex_init(&spa->spa_activities_lock, NULL, MUTEX_DEFAULT, NULL); 657 658 cv_init(&spa->spa_async_cv, NULL, CV_DEFAULT, NULL); 659 cv_init(&spa->spa_evicting_os_cv, NULL, CV_DEFAULT, NULL); 660 cv_init(&spa->spa_proc_cv, NULL, CV_DEFAULT, NULL); 661 cv_init(&spa->spa_scrub_io_cv, NULL, CV_DEFAULT, NULL); 662 cv_init(&spa->spa_suspend_cv, NULL, CV_DEFAULT, NULL); 663 cv_init(&spa->spa_activities_cv, NULL, CV_DEFAULT, NULL); 664 cv_init(&spa->spa_waiters_cv, NULL, CV_DEFAULT, NULL); 665 666 for (int t = 0; t < TXG_SIZE; t++) 667 bplist_create(&spa->spa_free_bplist[t]); 668 669 (void) strlcpy(spa->spa_name, name, sizeof (spa->spa_name)); 670 spa->spa_state = POOL_STATE_UNINITIALIZED; 671 spa->spa_freeze_txg = UINT64_MAX; 672 spa->spa_final_txg = UINT64_MAX; 673 spa->spa_load_max_txg = UINT64_MAX; 674 spa->spa_proc = &p0; 675 spa->spa_proc_state = SPA_PROC_NONE; 676 spa->spa_trust_config = B_TRUE; 677 spa->spa_hostid = zone_get_hostid(NULL); 678 679 spa->spa_deadman_synctime = MSEC2NSEC(zfs_deadman_synctime_ms); 680 spa->spa_deadman_ziotime = MSEC2NSEC(zfs_deadman_ziotime_ms); 681 spa_set_deadman_failmode(spa, zfs_deadman_failmode); 682 683 zfs_refcount_create(&spa->spa_refcount); 684 spa_config_lock_init(spa); 685 spa_stats_init(spa); 686 687 avl_add(&spa_namespace_avl, spa); 688 689 /* 690 * Set the alternate root, if there is one. 691 */ 692 if (altroot) 693 spa->spa_root = spa_strdup(altroot); 694 695 spa->spa_alloc_count = spa_allocators; 696 spa->spa_alloc_locks = kmem_zalloc(spa->spa_alloc_count * 697 sizeof (kmutex_t), KM_SLEEP); 698 spa->spa_alloc_trees = kmem_zalloc(spa->spa_alloc_count * 699 sizeof (avl_tree_t), KM_SLEEP); 700 for (int i = 0; i < spa->spa_alloc_count; i++) { 701 mutex_init(&spa->spa_alloc_locks[i], NULL, MUTEX_DEFAULT, NULL); 702 avl_create(&spa->spa_alloc_trees[i], zio_bookmark_compare, 703 sizeof (zio_t), offsetof(zio_t, io_alloc_node)); 704 } 705 avl_create(&spa->spa_metaslabs_by_flushed, metaslab_sort_by_flushed, 706 sizeof (metaslab_t), offsetof(metaslab_t, ms_spa_txg_node)); 707 avl_create(&spa->spa_sm_logs_by_txg, spa_log_sm_sort_by_txg, 708 sizeof (spa_log_sm_t), offsetof(spa_log_sm_t, sls_node)); 709 list_create(&spa->spa_log_summary, sizeof (log_summary_entry_t), 710 offsetof(log_summary_entry_t, lse_node)); 711 712 /* 713 * Every pool starts with the default cachefile 714 */ 715 list_create(&spa->spa_config_list, sizeof (spa_config_dirent_t), 716 offsetof(spa_config_dirent_t, scd_link)); 717 718 dp = kmem_zalloc(sizeof (spa_config_dirent_t), KM_SLEEP); 719 dp->scd_path = altroot ? NULL : spa_strdup(spa_config_path); 720 list_insert_head(&spa->spa_config_list, dp); 721 722 VERIFY(nvlist_alloc(&spa->spa_load_info, NV_UNIQUE_NAME, 723 KM_SLEEP) == 0); 724 725 if (config != NULL) { 726 nvlist_t *features; 727 728 if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_FEATURES_FOR_READ, 729 &features) == 0) { 730 VERIFY(nvlist_dup(features, &spa->spa_label_features, 731 0) == 0); 732 } 733 734 VERIFY(nvlist_dup(config, &spa->spa_config, 0) == 0); 735 } 736 737 if (spa->spa_label_features == NULL) { 738 VERIFY(nvlist_alloc(&spa->spa_label_features, NV_UNIQUE_NAME, 739 KM_SLEEP) == 0); 740 } 741 742 spa->spa_min_ashift = INT_MAX; 743 spa->spa_max_ashift = 0; 744 745 /* Reset cached value */ 746 spa->spa_dedup_dspace = ~0ULL; 747 748 /* 749 * As a pool is being created, treat all features as disabled by 750 * setting SPA_FEATURE_DISABLED for all entries in the feature 751 * refcount cache. 752 */ 753 for (int i = 0; i < SPA_FEATURES; i++) { 754 spa->spa_feat_refcount_cache[i] = SPA_FEATURE_DISABLED; 755 } 756 757 list_create(&spa->spa_leaf_list, sizeof (vdev_t), 758 offsetof(vdev_t, vdev_leaf_node)); 759 760 return (spa); 761 } 762 763 /* 764 * Removes a spa_t from the namespace, freeing up any memory used. Requires 765 * spa_namespace_lock. This is called only after the spa_t has been closed and 766 * deactivated. 767 */ 768 void 769 spa_remove(spa_t *spa) 770 { 771 spa_config_dirent_t *dp; 772 773 ASSERT(MUTEX_HELD(&spa_namespace_lock)); 774 ASSERT(spa_state(spa) == POOL_STATE_UNINITIALIZED); 775 ASSERT3U(zfs_refcount_count(&spa->spa_refcount), ==, 0); 776 ASSERT0(spa->spa_waiters); 777 778 nvlist_free(spa->spa_config_splitting); 779 780 avl_remove(&spa_namespace_avl, spa); 781 cv_broadcast(&spa_namespace_cv); 782 783 if (spa->spa_root) 784 spa_strfree(spa->spa_root); 785 786 while ((dp = list_head(&spa->spa_config_list)) != NULL) { 787 list_remove(&spa->spa_config_list, dp); 788 if (dp->scd_path != NULL) 789 spa_strfree(dp->scd_path); 790 kmem_free(dp, sizeof (spa_config_dirent_t)); 791 } 792 793 for (int i = 0; i < spa->spa_alloc_count; i++) { 794 avl_destroy(&spa->spa_alloc_trees[i]); 795 mutex_destroy(&spa->spa_alloc_locks[i]); 796 } 797 kmem_free(spa->spa_alloc_locks, spa->spa_alloc_count * 798 sizeof (kmutex_t)); 799 kmem_free(spa->spa_alloc_trees, spa->spa_alloc_count * 800 sizeof (avl_tree_t)); 801 802 avl_destroy(&spa->spa_metaslabs_by_flushed); 803 avl_destroy(&spa->spa_sm_logs_by_txg); 804 list_destroy(&spa->spa_log_summary); 805 list_destroy(&spa->spa_config_list); 806 list_destroy(&spa->spa_leaf_list); 807 808 nvlist_free(spa->spa_label_features); 809 nvlist_free(spa->spa_load_info); 810 nvlist_free(spa->spa_feat_stats); 811 spa_config_set(spa, NULL); 812 813 zfs_refcount_destroy(&spa->spa_refcount); 814 815 spa_stats_destroy(spa); 816 spa_config_lock_destroy(spa); 817 818 for (int t = 0; t < TXG_SIZE; t++) 819 bplist_destroy(&spa->spa_free_bplist[t]); 820 821 zio_checksum_templates_free(spa); 822 823 cv_destroy(&spa->spa_async_cv); 824 cv_destroy(&spa->spa_evicting_os_cv); 825 cv_destroy(&spa->spa_proc_cv); 826 cv_destroy(&spa->spa_scrub_io_cv); 827 cv_destroy(&spa->spa_suspend_cv); 828 cv_destroy(&spa->spa_activities_cv); 829 cv_destroy(&spa->spa_waiters_cv); 830 831 mutex_destroy(&spa->spa_flushed_ms_lock); 832 mutex_destroy(&spa->spa_async_lock); 833 mutex_destroy(&spa->spa_errlist_lock); 834 mutex_destroy(&spa->spa_errlog_lock); 835 mutex_destroy(&spa->spa_evicting_os_lock); 836 mutex_destroy(&spa->spa_history_lock); 837 mutex_destroy(&spa->spa_proc_lock); 838 mutex_destroy(&spa->spa_props_lock); 839 mutex_destroy(&spa->spa_cksum_tmpls_lock); 840 mutex_destroy(&spa->spa_scrub_lock); 841 mutex_destroy(&spa->spa_suspend_lock); 842 mutex_destroy(&spa->spa_vdev_top_lock); 843 mutex_destroy(&spa->spa_feat_stats_lock); 844 mutex_destroy(&spa->spa_activities_lock); 845 846 kmem_free(spa, sizeof (spa_t)); 847 } 848 849 /* 850 * Given a pool, return the next pool in the namespace, or NULL if there is 851 * none. If 'prev' is NULL, return the first pool. 852 */ 853 spa_t * 854 spa_next(spa_t *prev) 855 { 856 ASSERT(MUTEX_HELD(&spa_namespace_lock)); 857 858 if (prev) 859 return (AVL_NEXT(&spa_namespace_avl, prev)); 860 else 861 return (avl_first(&spa_namespace_avl)); 862 } 863 864 /* 865 * ========================================================================== 866 * SPA refcount functions 867 * ========================================================================== 868 */ 869 870 /* 871 * Add a reference to the given spa_t. Must have at least one reference, or 872 * have the namespace lock held. 873 */ 874 void 875 spa_open_ref(spa_t *spa, void *tag) 876 { 877 ASSERT(zfs_refcount_count(&spa->spa_refcount) >= spa->spa_minref || 878 MUTEX_HELD(&spa_namespace_lock)); 879 (void) zfs_refcount_add(&spa->spa_refcount, tag); 880 } 881 882 /* 883 * Remove a reference to the given spa_t. Must have at least one reference, or 884 * have the namespace lock held. 885 */ 886 void 887 spa_close(spa_t *spa, void *tag) 888 { 889 ASSERT(zfs_refcount_count(&spa->spa_refcount) > spa->spa_minref || 890 MUTEX_HELD(&spa_namespace_lock)); 891 (void) zfs_refcount_remove(&spa->spa_refcount, tag); 892 } 893 894 /* 895 * Remove a reference to the given spa_t held by a dsl dir that is 896 * being asynchronously released. Async releases occur from a taskq 897 * performing eviction of dsl datasets and dirs. The namespace lock 898 * isn't held and the hold by the object being evicted may contribute to 899 * spa_minref (e.g. dataset or directory released during pool export), 900 * so the asserts in spa_close() do not apply. 901 */ 902 void 903 spa_async_close(spa_t *spa, void *tag) 904 { 905 (void) zfs_refcount_remove(&spa->spa_refcount, tag); 906 } 907 908 /* 909 * Check to see if the spa refcount is zero. Must be called with 910 * spa_namespace_lock held. We really compare against spa_minref, which is the 911 * number of references acquired when opening a pool 912 */ 913 boolean_t 914 spa_refcount_zero(spa_t *spa) 915 { 916 ASSERT(MUTEX_HELD(&spa_namespace_lock)); 917 918 return (zfs_refcount_count(&spa->spa_refcount) == spa->spa_minref); 919 } 920 921 /* 922 * ========================================================================== 923 * SPA spare and l2cache tracking 924 * ========================================================================== 925 */ 926 927 /* 928 * Hot spares and cache devices are tracked using the same code below, 929 * for 'auxiliary' devices. 930 */ 931 932 typedef struct spa_aux { 933 uint64_t aux_guid; 934 uint64_t aux_pool; 935 avl_node_t aux_avl; 936 int aux_count; 937 } spa_aux_t; 938 939 static inline int 940 spa_aux_compare(const void *a, const void *b) 941 { 942 const spa_aux_t *sa = (const spa_aux_t *)a; 943 const spa_aux_t *sb = (const spa_aux_t *)b; 944 945 return (TREE_CMP(sa->aux_guid, sb->aux_guid)); 946 } 947 948 static void 949 spa_aux_add(vdev_t *vd, avl_tree_t *avl) 950 { 951 avl_index_t where; 952 spa_aux_t search; 953 spa_aux_t *aux; 954 955 search.aux_guid = vd->vdev_guid; 956 if ((aux = avl_find(avl, &search, &where)) != NULL) { 957 aux->aux_count++; 958 } else { 959 aux = kmem_zalloc(sizeof (spa_aux_t), KM_SLEEP); 960 aux->aux_guid = vd->vdev_guid; 961 aux->aux_count = 1; 962 avl_insert(avl, aux, where); 963 } 964 } 965 966 static void 967 spa_aux_remove(vdev_t *vd, avl_tree_t *avl) 968 { 969 spa_aux_t search; 970 spa_aux_t *aux; 971 avl_index_t where; 972 973 search.aux_guid = vd->vdev_guid; 974 aux = avl_find(avl, &search, &where); 975 976 ASSERT(aux != NULL); 977 978 if (--aux->aux_count == 0) { 979 avl_remove(avl, aux); 980 kmem_free(aux, sizeof (spa_aux_t)); 981 } else if (aux->aux_pool == spa_guid(vd->vdev_spa)) { 982 aux->aux_pool = 0ULL; 983 } 984 } 985 986 static boolean_t 987 spa_aux_exists(uint64_t guid, uint64_t *pool, int *refcnt, avl_tree_t *avl) 988 { 989 spa_aux_t search, *found; 990 991 search.aux_guid = guid; 992 found = avl_find(avl, &search, NULL); 993 994 if (pool) { 995 if (found) 996 *pool = found->aux_pool; 997 else 998 *pool = 0ULL; 999 } 1000 1001 if (refcnt) { 1002 if (found) 1003 *refcnt = found->aux_count; 1004 else 1005 *refcnt = 0; 1006 } 1007 1008 return (found != NULL); 1009 } 1010 1011 static void 1012 spa_aux_activate(vdev_t *vd, avl_tree_t *avl) 1013 { 1014 spa_aux_t search, *found; 1015 avl_index_t where; 1016 1017 search.aux_guid = vd->vdev_guid; 1018 found = avl_find(avl, &search, &where); 1019 ASSERT(found != NULL); 1020 ASSERT(found->aux_pool == 0ULL); 1021 1022 found->aux_pool = spa_guid(vd->vdev_spa); 1023 } 1024 1025 /* 1026 * Spares are tracked globally due to the following constraints: 1027 * 1028 * - A spare may be part of multiple pools. 1029 * - A spare may be added to a pool even if it's actively in use within 1030 * another pool. 1031 * - A spare in use in any pool can only be the source of a replacement if 1032 * the target is a spare in the same pool. 1033 * 1034 * We keep track of all spares on the system through the use of a reference 1035 * counted AVL tree. When a vdev is added as a spare, or used as a replacement 1036 * spare, then we bump the reference count in the AVL tree. In addition, we set 1037 * the 'vdev_isspare' member to indicate that the device is a spare (active or 1038 * inactive). When a spare is made active (used to replace a device in the 1039 * pool), we also keep track of which pool its been made a part of. 1040 * 1041 * The 'spa_spare_lock' protects the AVL tree. These functions are normally 1042 * called under the spa_namespace lock as part of vdev reconfiguration. The 1043 * separate spare lock exists for the status query path, which does not need to 1044 * be completely consistent with respect to other vdev configuration changes. 1045 */ 1046 1047 static int 1048 spa_spare_compare(const void *a, const void *b) 1049 { 1050 return (spa_aux_compare(a, b)); 1051 } 1052 1053 void 1054 spa_spare_add(vdev_t *vd) 1055 { 1056 mutex_enter(&spa_spare_lock); 1057 ASSERT(!vd->vdev_isspare); 1058 spa_aux_add(vd, &spa_spare_avl); 1059 vd->vdev_isspare = B_TRUE; 1060 mutex_exit(&spa_spare_lock); 1061 } 1062 1063 void 1064 spa_spare_remove(vdev_t *vd) 1065 { 1066 mutex_enter(&spa_spare_lock); 1067 ASSERT(vd->vdev_isspare); 1068 spa_aux_remove(vd, &spa_spare_avl); 1069 vd->vdev_isspare = B_FALSE; 1070 mutex_exit(&spa_spare_lock); 1071 } 1072 1073 boolean_t 1074 spa_spare_exists(uint64_t guid, uint64_t *pool, int *refcnt) 1075 { 1076 boolean_t found; 1077 1078 mutex_enter(&spa_spare_lock); 1079 found = spa_aux_exists(guid, pool, refcnt, &spa_spare_avl); 1080 mutex_exit(&spa_spare_lock); 1081 1082 return (found); 1083 } 1084 1085 void 1086 spa_spare_activate(vdev_t *vd) 1087 { 1088 mutex_enter(&spa_spare_lock); 1089 ASSERT(vd->vdev_isspare); 1090 spa_aux_activate(vd, &spa_spare_avl); 1091 mutex_exit(&spa_spare_lock); 1092 } 1093 1094 /* 1095 * Level 2 ARC devices are tracked globally for the same reasons as spares. 1096 * Cache devices currently only support one pool per cache device, and so 1097 * for these devices the aux reference count is currently unused beyond 1. 1098 */ 1099 1100 static int 1101 spa_l2cache_compare(const void *a, const void *b) 1102 { 1103 return (spa_aux_compare(a, b)); 1104 } 1105 1106 void 1107 spa_l2cache_add(vdev_t *vd) 1108 { 1109 mutex_enter(&spa_l2cache_lock); 1110 ASSERT(!vd->vdev_isl2cache); 1111 spa_aux_add(vd, &spa_l2cache_avl); 1112 vd->vdev_isl2cache = B_TRUE; 1113 mutex_exit(&spa_l2cache_lock); 1114 } 1115 1116 void 1117 spa_l2cache_remove(vdev_t *vd) 1118 { 1119 mutex_enter(&spa_l2cache_lock); 1120 ASSERT(vd->vdev_isl2cache); 1121 spa_aux_remove(vd, &spa_l2cache_avl); 1122 vd->vdev_isl2cache = B_FALSE; 1123 mutex_exit(&spa_l2cache_lock); 1124 } 1125 1126 boolean_t 1127 spa_l2cache_exists(uint64_t guid, uint64_t *pool) 1128 { 1129 boolean_t found; 1130 1131 mutex_enter(&spa_l2cache_lock); 1132 found = spa_aux_exists(guid, pool, NULL, &spa_l2cache_avl); 1133 mutex_exit(&spa_l2cache_lock); 1134 1135 return (found); 1136 } 1137 1138 void 1139 spa_l2cache_activate(vdev_t *vd) 1140 { 1141 mutex_enter(&spa_l2cache_lock); 1142 ASSERT(vd->vdev_isl2cache); 1143 spa_aux_activate(vd, &spa_l2cache_avl); 1144 mutex_exit(&spa_l2cache_lock); 1145 } 1146 1147 /* 1148 * ========================================================================== 1149 * SPA vdev locking 1150 * ========================================================================== 1151 */ 1152 1153 /* 1154 * Lock the given spa_t for the purpose of adding or removing a vdev. 1155 * Grabs the global spa_namespace_lock plus the spa config lock for writing. 1156 * It returns the next transaction group for the spa_t. 1157 */ 1158 uint64_t 1159 spa_vdev_enter(spa_t *spa) 1160 { 1161 mutex_enter(&spa->spa_vdev_top_lock); 1162 mutex_enter(&spa_namespace_lock); 1163 1164 vdev_autotrim_stop_all(spa); 1165 1166 return (spa_vdev_config_enter(spa)); 1167 } 1168 1169 /* 1170 * The same as spa_vdev_enter() above but additionally takes the guid of 1171 * the vdev being detached. When there is a rebuild in process it will be 1172 * suspended while the vdev tree is modified then resumed by spa_vdev_exit(). 1173 * The rebuild is canceled if only a single child remains after the detach. 1174 */ 1175 uint64_t 1176 spa_vdev_detach_enter(spa_t *spa, uint64_t guid) 1177 { 1178 mutex_enter(&spa->spa_vdev_top_lock); 1179 mutex_enter(&spa_namespace_lock); 1180 1181 vdev_autotrim_stop_all(spa); 1182 1183 if (guid != 0) { 1184 vdev_t *vd = spa_lookup_by_guid(spa, guid, B_FALSE); 1185 if (vd) { 1186 vdev_rebuild_stop_wait(vd->vdev_top); 1187 } 1188 } 1189 1190 return (spa_vdev_config_enter(spa)); 1191 } 1192 1193 /* 1194 * Internal implementation for spa_vdev_enter(). Used when a vdev 1195 * operation requires multiple syncs (i.e. removing a device) while 1196 * keeping the spa_namespace_lock held. 1197 */ 1198 uint64_t 1199 spa_vdev_config_enter(spa_t *spa) 1200 { 1201 ASSERT(MUTEX_HELD(&spa_namespace_lock)); 1202 1203 spa_config_enter(spa, SCL_ALL, spa, RW_WRITER); 1204 1205 return (spa_last_synced_txg(spa) + 1); 1206 } 1207 1208 /* 1209 * Used in combination with spa_vdev_config_enter() to allow the syncing 1210 * of multiple transactions without releasing the spa_namespace_lock. 1211 */ 1212 void 1213 spa_vdev_config_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error, char *tag) 1214 { 1215 ASSERT(MUTEX_HELD(&spa_namespace_lock)); 1216 1217 int config_changed = B_FALSE; 1218 1219 ASSERT(txg > spa_last_synced_txg(spa)); 1220 1221 spa->spa_pending_vdev = NULL; 1222 1223 /* 1224 * Reassess the DTLs. 1225 */ 1226 vdev_dtl_reassess(spa->spa_root_vdev, 0, 0, B_FALSE, B_FALSE); 1227 1228 if (error == 0 && !list_is_empty(&spa->spa_config_dirty_list)) { 1229 config_changed = B_TRUE; 1230 spa->spa_config_generation++; 1231 } 1232 1233 /* 1234 * Verify the metaslab classes. 1235 */ 1236 ASSERT(metaslab_class_validate(spa_normal_class(spa)) == 0); 1237 ASSERT(metaslab_class_validate(spa_log_class(spa)) == 0); 1238 ASSERT(metaslab_class_validate(spa_special_class(spa)) == 0); 1239 ASSERT(metaslab_class_validate(spa_dedup_class(spa)) == 0); 1240 1241 spa_config_exit(spa, SCL_ALL, spa); 1242 1243 /* 1244 * Panic the system if the specified tag requires it. This 1245 * is useful for ensuring that configurations are updated 1246 * transactionally. 1247 */ 1248 if (zio_injection_enabled) 1249 zio_handle_panic_injection(spa, tag, 0); 1250 1251 /* 1252 * Note: this txg_wait_synced() is important because it ensures 1253 * that there won't be more than one config change per txg. 1254 * This allows us to use the txg as the generation number. 1255 */ 1256 if (error == 0) 1257 txg_wait_synced(spa->spa_dsl_pool, txg); 1258 1259 if (vd != NULL) { 1260 ASSERT(!vd->vdev_detached || vd->vdev_dtl_sm == NULL); 1261 if (vd->vdev_ops->vdev_op_leaf) { 1262 mutex_enter(&vd->vdev_initialize_lock); 1263 vdev_initialize_stop(vd, VDEV_INITIALIZE_CANCELED, 1264 NULL); 1265 mutex_exit(&vd->vdev_initialize_lock); 1266 1267 mutex_enter(&vd->vdev_trim_lock); 1268 vdev_trim_stop(vd, VDEV_TRIM_CANCELED, NULL); 1269 mutex_exit(&vd->vdev_trim_lock); 1270 } 1271 1272 /* 1273 * The vdev may be both a leaf and top-level device. 1274 */ 1275 vdev_autotrim_stop_wait(vd); 1276 1277 spa_config_enter(spa, SCL_ALL, spa, RW_WRITER); 1278 vdev_free(vd); 1279 spa_config_exit(spa, SCL_ALL, spa); 1280 } 1281 1282 /* 1283 * If the config changed, update the config cache. 1284 */ 1285 if (config_changed) 1286 spa_write_cachefile(spa, B_FALSE, B_TRUE); 1287 } 1288 1289 /* 1290 * Unlock the spa_t after adding or removing a vdev. Besides undoing the 1291 * locking of spa_vdev_enter(), we also want make sure the transactions have 1292 * synced to disk, and then update the global configuration cache with the new 1293 * information. 1294 */ 1295 int 1296 spa_vdev_exit(spa_t *spa, vdev_t *vd, uint64_t txg, int error) 1297 { 1298 vdev_autotrim_restart(spa); 1299 vdev_rebuild_restart(spa); 1300 1301 spa_vdev_config_exit(spa, vd, txg, error, FTAG); 1302 mutex_exit(&spa_namespace_lock); 1303 mutex_exit(&spa->spa_vdev_top_lock); 1304 1305 return (error); 1306 } 1307 1308 /* 1309 * Lock the given spa_t for the purpose of changing vdev state. 1310 */ 1311 void 1312 spa_vdev_state_enter(spa_t *spa, int oplocks) 1313 { 1314 int locks = SCL_STATE_ALL | oplocks; 1315 1316 /* 1317 * Root pools may need to read of the underlying devfs filesystem 1318 * when opening up a vdev. Unfortunately if we're holding the 1319 * SCL_ZIO lock it will result in a deadlock when we try to issue 1320 * the read from the root filesystem. Instead we "prefetch" 1321 * the associated vnodes that we need prior to opening the 1322 * underlying devices and cache them so that we can prevent 1323 * any I/O when we are doing the actual open. 1324 */ 1325 if (spa_is_root(spa)) { 1326 int low = locks & ~(SCL_ZIO - 1); 1327 int high = locks & ~low; 1328 1329 spa_config_enter(spa, high, spa, RW_WRITER); 1330 vdev_hold(spa->spa_root_vdev); 1331 spa_config_enter(spa, low, spa, RW_WRITER); 1332 } else { 1333 spa_config_enter(spa, locks, spa, RW_WRITER); 1334 } 1335 spa->spa_vdev_locks = locks; 1336 } 1337 1338 int 1339 spa_vdev_state_exit(spa_t *spa, vdev_t *vd, int error) 1340 { 1341 boolean_t config_changed = B_FALSE; 1342 vdev_t *vdev_top; 1343 1344 if (vd == NULL || vd == spa->spa_root_vdev) { 1345 vdev_top = spa->spa_root_vdev; 1346 } else { 1347 vdev_top = vd->vdev_top; 1348 } 1349 1350 if (vd != NULL || error == 0) 1351 vdev_dtl_reassess(vdev_top, 0, 0, B_FALSE, B_FALSE); 1352 1353 if (vd != NULL) { 1354 if (vd != spa->spa_root_vdev) 1355 vdev_state_dirty(vdev_top); 1356 1357 config_changed = B_TRUE; 1358 spa->spa_config_generation++; 1359 } 1360 1361 if (spa_is_root(spa)) 1362 vdev_rele(spa->spa_root_vdev); 1363 1364 ASSERT3U(spa->spa_vdev_locks, >=, SCL_STATE_ALL); 1365 spa_config_exit(spa, spa->spa_vdev_locks, spa); 1366 1367 /* 1368 * If anything changed, wait for it to sync. This ensures that, 1369 * from the system administrator's perspective, zpool(1M) commands 1370 * are synchronous. This is important for things like zpool offline: 1371 * when the command completes, you expect no further I/O from ZFS. 1372 */ 1373 if (vd != NULL) 1374 txg_wait_synced(spa->spa_dsl_pool, 0); 1375 1376 /* 1377 * If the config changed, update the config cache. 1378 */ 1379 if (config_changed) { 1380 mutex_enter(&spa_namespace_lock); 1381 spa_write_cachefile(spa, B_FALSE, B_TRUE); 1382 mutex_exit(&spa_namespace_lock); 1383 } 1384 1385 return (error); 1386 } 1387 1388 /* 1389 * ========================================================================== 1390 * Miscellaneous functions 1391 * ========================================================================== 1392 */ 1393 1394 void 1395 spa_activate_mos_feature(spa_t *spa, const char *feature, dmu_tx_t *tx) 1396 { 1397 if (!nvlist_exists(spa->spa_label_features, feature)) { 1398 fnvlist_add_boolean(spa->spa_label_features, feature); 1399 /* 1400 * When we are creating the pool (tx_txg==TXG_INITIAL), we can't 1401 * dirty the vdev config because lock SCL_CONFIG is not held. 1402 * Thankfully, in this case we don't need to dirty the config 1403 * because it will be written out anyway when we finish 1404 * creating the pool. 1405 */ 1406 if (tx->tx_txg != TXG_INITIAL) 1407 vdev_config_dirty(spa->spa_root_vdev); 1408 } 1409 } 1410 1411 void 1412 spa_deactivate_mos_feature(spa_t *spa, const char *feature) 1413 { 1414 if (nvlist_remove_all(spa->spa_label_features, feature) == 0) 1415 vdev_config_dirty(spa->spa_root_vdev); 1416 } 1417 1418 /* 1419 * Return the spa_t associated with given pool_guid, if it exists. If 1420 * device_guid is non-zero, determine whether the pool exists *and* contains 1421 * a device with the specified device_guid. 1422 */ 1423 spa_t * 1424 spa_by_guid(uint64_t pool_guid, uint64_t device_guid) 1425 { 1426 spa_t *spa; 1427 avl_tree_t *t = &spa_namespace_avl; 1428 1429 ASSERT(MUTEX_HELD(&spa_namespace_lock)); 1430 1431 for (spa = avl_first(t); spa != NULL; spa = AVL_NEXT(t, spa)) { 1432 if (spa->spa_state == POOL_STATE_UNINITIALIZED) 1433 continue; 1434 if (spa->spa_root_vdev == NULL) 1435 continue; 1436 if (spa_guid(spa) == pool_guid) { 1437 if (device_guid == 0) 1438 break; 1439 1440 if (vdev_lookup_by_guid(spa->spa_root_vdev, 1441 device_guid) != NULL) 1442 break; 1443 1444 /* 1445 * Check any devices we may be in the process of adding. 1446 */ 1447 if (spa->spa_pending_vdev) { 1448 if (vdev_lookup_by_guid(spa->spa_pending_vdev, 1449 device_guid) != NULL) 1450 break; 1451 } 1452 } 1453 } 1454 1455 return (spa); 1456 } 1457 1458 /* 1459 * Determine whether a pool with the given pool_guid exists. 1460 */ 1461 boolean_t 1462 spa_guid_exists(uint64_t pool_guid, uint64_t device_guid) 1463 { 1464 return (spa_by_guid(pool_guid, device_guid) != NULL); 1465 } 1466 1467 char * 1468 spa_strdup(const char *s) 1469 { 1470 size_t len; 1471 char *new; 1472 1473 len = strlen(s); 1474 new = kmem_alloc(len + 1, KM_SLEEP); 1475 bcopy(s, new, len); 1476 new[len] = '\0'; 1477 1478 return (new); 1479 } 1480 1481 void 1482 spa_strfree(char *s) 1483 { 1484 kmem_free(s, strlen(s) + 1); 1485 } 1486 1487 uint64_t 1488 spa_get_random(uint64_t range) 1489 { 1490 uint64_t r; 1491 1492 ASSERT(range != 0); 1493 1494 if (range == 1) 1495 return (0); 1496 1497 (void) random_get_pseudo_bytes((void *)&r, sizeof (uint64_t)); 1498 1499 return (r % range); 1500 } 1501 1502 uint64_t 1503 spa_generate_guid(spa_t *spa) 1504 { 1505 uint64_t guid = spa_get_random(-1ULL); 1506 1507 if (spa != NULL) { 1508 while (guid == 0 || spa_guid_exists(spa_guid(spa), guid)) 1509 guid = spa_get_random(-1ULL); 1510 } else { 1511 while (guid == 0 || spa_guid_exists(guid, 0)) 1512 guid = spa_get_random(-1ULL); 1513 } 1514 1515 return (guid); 1516 } 1517 1518 void 1519 snprintf_blkptr(char *buf, size_t buflen, const blkptr_t *bp) 1520 { 1521 char type[256]; 1522 char *checksum = NULL; 1523 char *compress = NULL; 1524 1525 if (bp != NULL) { 1526 if (BP_GET_TYPE(bp) & DMU_OT_NEWTYPE) { 1527 dmu_object_byteswap_t bswap = 1528 DMU_OT_BYTESWAP(BP_GET_TYPE(bp)); 1529 (void) snprintf(type, sizeof (type), "bswap %s %s", 1530 DMU_OT_IS_METADATA(BP_GET_TYPE(bp)) ? 1531 "metadata" : "data", 1532 dmu_ot_byteswap[bswap].ob_name); 1533 } else { 1534 (void) strlcpy(type, dmu_ot[BP_GET_TYPE(bp)].ot_name, 1535 sizeof (type)); 1536 } 1537 if (!BP_IS_EMBEDDED(bp)) { 1538 checksum = 1539 zio_checksum_table[BP_GET_CHECKSUM(bp)].ci_name; 1540 } 1541 compress = zio_compress_table[BP_GET_COMPRESS(bp)].ci_name; 1542 } 1543 1544 SNPRINTF_BLKPTR(snprintf, ' ', buf, buflen, bp, type, checksum, 1545 compress); 1546 } 1547 1548 void 1549 spa_freeze(spa_t *spa) 1550 { 1551 uint64_t freeze_txg = 0; 1552 1553 spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER); 1554 if (spa->spa_freeze_txg == UINT64_MAX) { 1555 freeze_txg = spa_last_synced_txg(spa) + TXG_SIZE; 1556 spa->spa_freeze_txg = freeze_txg; 1557 } 1558 spa_config_exit(spa, SCL_ALL, FTAG); 1559 if (freeze_txg != 0) 1560 txg_wait_synced(spa_get_dsl(spa), freeze_txg); 1561 } 1562 1563 void 1564 zfs_panic_recover(const char *fmt, ...) 1565 { 1566 va_list adx; 1567 1568 va_start(adx, fmt); 1569 vcmn_err(zfs_recover ? CE_WARN : CE_PANIC, fmt, adx); 1570 va_end(adx); 1571 } 1572 1573 /* 1574 * This is a stripped-down version of strtoull, suitable only for converting 1575 * lowercase hexadecimal numbers that don't overflow. 1576 */ 1577 uint64_t 1578 zfs_strtonum(const char *str, char **nptr) 1579 { 1580 uint64_t val = 0; 1581 char c; 1582 int digit; 1583 1584 while ((c = *str) != '\0') { 1585 if (c >= '0' && c <= '9') 1586 digit = c - '0'; 1587 else if (c >= 'a' && c <= 'f') 1588 digit = 10 + c - 'a'; 1589 else 1590 break; 1591 1592 val *= 16; 1593 val += digit; 1594 1595 str++; 1596 } 1597 1598 if (nptr) 1599 *nptr = (char *)str; 1600 1601 return (val); 1602 } 1603 1604 void 1605 spa_activate_allocation_classes(spa_t *spa, dmu_tx_t *tx) 1606 { 1607 /* 1608 * We bump the feature refcount for each special vdev added to the pool 1609 */ 1610 ASSERT(spa_feature_is_enabled(spa, SPA_FEATURE_ALLOCATION_CLASSES)); 1611 spa_feature_incr(spa, SPA_FEATURE_ALLOCATION_CLASSES, tx); 1612 } 1613 1614 /* 1615 * ========================================================================== 1616 * Accessor functions 1617 * ========================================================================== 1618 */ 1619 1620 boolean_t 1621 spa_shutting_down(spa_t *spa) 1622 { 1623 return (spa->spa_async_suspended); 1624 } 1625 1626 dsl_pool_t * 1627 spa_get_dsl(spa_t *spa) 1628 { 1629 return (spa->spa_dsl_pool); 1630 } 1631 1632 boolean_t 1633 spa_is_initializing(spa_t *spa) 1634 { 1635 return (spa->spa_is_initializing); 1636 } 1637 1638 boolean_t 1639 spa_indirect_vdevs_loaded(spa_t *spa) 1640 { 1641 return (spa->spa_indirect_vdevs_loaded); 1642 } 1643 1644 blkptr_t * 1645 spa_get_rootblkptr(spa_t *spa) 1646 { 1647 return (&spa->spa_ubsync.ub_rootbp); 1648 } 1649 1650 void 1651 spa_set_rootblkptr(spa_t *spa, const blkptr_t *bp) 1652 { 1653 spa->spa_uberblock.ub_rootbp = *bp; 1654 } 1655 1656 void 1657 spa_altroot(spa_t *spa, char *buf, size_t buflen) 1658 { 1659 if (spa->spa_root == NULL) 1660 buf[0] = '\0'; 1661 else 1662 (void) strncpy(buf, spa->spa_root, buflen); 1663 } 1664 1665 int 1666 spa_sync_pass(spa_t *spa) 1667 { 1668 return (spa->spa_sync_pass); 1669 } 1670 1671 char * 1672 spa_name(spa_t *spa) 1673 { 1674 return (spa->spa_name); 1675 } 1676 1677 uint64_t 1678 spa_guid(spa_t *spa) 1679 { 1680 dsl_pool_t *dp = spa_get_dsl(spa); 1681 uint64_t guid; 1682 1683 /* 1684 * If we fail to parse the config during spa_load(), we can go through 1685 * the error path (which posts an ereport) and end up here with no root 1686 * vdev. We stash the original pool guid in 'spa_config_guid' to handle 1687 * this case. 1688 */ 1689 if (spa->spa_root_vdev == NULL) 1690 return (spa->spa_config_guid); 1691 1692 guid = spa->spa_last_synced_guid != 0 ? 1693 spa->spa_last_synced_guid : spa->spa_root_vdev->vdev_guid; 1694 1695 /* 1696 * Return the most recently synced out guid unless we're 1697 * in syncing context. 1698 */ 1699 if (dp && dsl_pool_sync_context(dp)) 1700 return (spa->spa_root_vdev->vdev_guid); 1701 else 1702 return (guid); 1703 } 1704 1705 uint64_t 1706 spa_load_guid(spa_t *spa) 1707 { 1708 /* 1709 * This is a GUID that exists solely as a reference for the 1710 * purposes of the arc. It is generated at load time, and 1711 * is never written to persistent storage. 1712 */ 1713 return (spa->spa_load_guid); 1714 } 1715 1716 uint64_t 1717 spa_last_synced_txg(spa_t *spa) 1718 { 1719 return (spa->spa_ubsync.ub_txg); 1720 } 1721 1722 uint64_t 1723 spa_first_txg(spa_t *spa) 1724 { 1725 return (spa->spa_first_txg); 1726 } 1727 1728 uint64_t 1729 spa_syncing_txg(spa_t *spa) 1730 { 1731 return (spa->spa_syncing_txg); 1732 } 1733 1734 /* 1735 * Return the last txg where data can be dirtied. The final txgs 1736 * will be used to just clear out any deferred frees that remain. 1737 */ 1738 uint64_t 1739 spa_final_dirty_txg(spa_t *spa) 1740 { 1741 return (spa->spa_final_txg - TXG_DEFER_SIZE); 1742 } 1743 1744 pool_state_t 1745 spa_state(spa_t *spa) 1746 { 1747 return (spa->spa_state); 1748 } 1749 1750 spa_load_state_t 1751 spa_load_state(spa_t *spa) 1752 { 1753 return (spa->spa_load_state); 1754 } 1755 1756 uint64_t 1757 spa_freeze_txg(spa_t *spa) 1758 { 1759 return (spa->spa_freeze_txg); 1760 } 1761 1762 /* 1763 * Return the inflated asize for a logical write in bytes. This is used by the 1764 * DMU to calculate the space a logical write will require on disk. 1765 * If lsize is smaller than the largest physical block size allocatable on this 1766 * pool we use its value instead, since the write will end up using the whole 1767 * block anyway. 1768 */ 1769 uint64_t 1770 spa_get_worst_case_asize(spa_t *spa, uint64_t lsize) 1771 { 1772 if (lsize == 0) 1773 return (0); /* No inflation needed */ 1774 return (MAX(lsize, 1 << spa->spa_max_ashift) * spa_asize_inflation); 1775 } 1776 1777 /* 1778 * Return the amount of slop space in bytes. It is 1/32 of the pool (3.2%), 1779 * or at least 128MB, unless that would cause it to be more than half the 1780 * pool size. 1781 * 1782 * See the comment above spa_slop_shift for details. 1783 */ 1784 uint64_t 1785 spa_get_slop_space(spa_t *spa) 1786 { 1787 uint64_t space = spa_get_dspace(spa); 1788 return (MAX(space >> spa_slop_shift, MIN(space >> 1, spa_min_slop))); 1789 } 1790 1791 uint64_t 1792 spa_get_dspace(spa_t *spa) 1793 { 1794 return (spa->spa_dspace); 1795 } 1796 1797 uint64_t 1798 spa_get_checkpoint_space(spa_t *spa) 1799 { 1800 return (spa->spa_checkpoint_info.sci_dspace); 1801 } 1802 1803 void 1804 spa_update_dspace(spa_t *spa) 1805 { 1806 spa->spa_dspace = metaslab_class_get_dspace(spa_normal_class(spa)) + 1807 ddt_get_dedup_dspace(spa); 1808 if (spa->spa_vdev_removal != NULL) { 1809 /* 1810 * We can't allocate from the removing device, so 1811 * subtract its size. This prevents the DMU/DSL from 1812 * filling up the (now smaller) pool while we are in the 1813 * middle of removing the device. 1814 * 1815 * Note that the DMU/DSL doesn't actually know or care 1816 * how much space is allocated (it does its own tracking 1817 * of how much space has been logically used). So it 1818 * doesn't matter that the data we are moving may be 1819 * allocated twice (on the old device and the new 1820 * device). 1821 */ 1822 spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); 1823 vdev_t *vd = 1824 vdev_lookup_top(spa, spa->spa_vdev_removal->svr_vdev_id); 1825 spa->spa_dspace -= spa_deflate(spa) ? 1826 vd->vdev_stat.vs_dspace : vd->vdev_stat.vs_space; 1827 spa_config_exit(spa, SCL_VDEV, FTAG); 1828 } 1829 } 1830 1831 /* 1832 * Return the failure mode that has been set to this pool. The default 1833 * behavior will be to block all I/Os when a complete failure occurs. 1834 */ 1835 uint64_t 1836 spa_get_failmode(spa_t *spa) 1837 { 1838 return (spa->spa_failmode); 1839 } 1840 1841 boolean_t 1842 spa_suspended(spa_t *spa) 1843 { 1844 return (spa->spa_suspended != ZIO_SUSPEND_NONE); 1845 } 1846 1847 uint64_t 1848 spa_version(spa_t *spa) 1849 { 1850 return (spa->spa_ubsync.ub_version); 1851 } 1852 1853 boolean_t 1854 spa_deflate(spa_t *spa) 1855 { 1856 return (spa->spa_deflate); 1857 } 1858 1859 metaslab_class_t * 1860 spa_normal_class(spa_t *spa) 1861 { 1862 return (spa->spa_normal_class); 1863 } 1864 1865 metaslab_class_t * 1866 spa_log_class(spa_t *spa) 1867 { 1868 return (spa->spa_log_class); 1869 } 1870 1871 metaslab_class_t * 1872 spa_special_class(spa_t *spa) 1873 { 1874 return (spa->spa_special_class); 1875 } 1876 1877 metaslab_class_t * 1878 spa_dedup_class(spa_t *spa) 1879 { 1880 return (spa->spa_dedup_class); 1881 } 1882 1883 /* 1884 * Locate an appropriate allocation class 1885 */ 1886 metaslab_class_t * 1887 spa_preferred_class(spa_t *spa, uint64_t size, dmu_object_type_t objtype, 1888 uint_t level, uint_t special_smallblk) 1889 { 1890 if (DMU_OT_IS_ZIL(objtype)) { 1891 if (spa->spa_log_class->mc_groups != 0) 1892 return (spa_log_class(spa)); 1893 else 1894 return (spa_normal_class(spa)); 1895 } 1896 1897 boolean_t has_special_class = spa->spa_special_class->mc_groups != 0; 1898 1899 if (DMU_OT_IS_DDT(objtype)) { 1900 if (spa->spa_dedup_class->mc_groups != 0) 1901 return (spa_dedup_class(spa)); 1902 else if (has_special_class && zfs_ddt_data_is_special) 1903 return (spa_special_class(spa)); 1904 else 1905 return (spa_normal_class(spa)); 1906 } 1907 1908 /* Indirect blocks for user data can land in special if allowed */ 1909 if (level > 0 && (DMU_OT_IS_FILE(objtype) || objtype == DMU_OT_ZVOL)) { 1910 if (has_special_class && zfs_user_indirect_is_special) 1911 return (spa_special_class(spa)); 1912 else 1913 return (spa_normal_class(spa)); 1914 } 1915 1916 if (DMU_OT_IS_METADATA(objtype) || level > 0) { 1917 if (has_special_class) 1918 return (spa_special_class(spa)); 1919 else 1920 return (spa_normal_class(spa)); 1921 } 1922 1923 /* 1924 * Allow small file blocks in special class in some cases (like 1925 * for the dRAID vdev feature). But always leave a reserve of 1926 * zfs_special_class_metadata_reserve_pct exclusively for metadata. 1927 */ 1928 if (DMU_OT_IS_FILE(objtype) && 1929 has_special_class && size <= special_smallblk) { 1930 metaslab_class_t *special = spa_special_class(spa); 1931 uint64_t alloc = metaslab_class_get_alloc(special); 1932 uint64_t space = metaslab_class_get_space(special); 1933 uint64_t limit = 1934 (space * (100 - zfs_special_class_metadata_reserve_pct)) 1935 / 100; 1936 1937 if (alloc < limit) 1938 return (special); 1939 } 1940 1941 return (spa_normal_class(spa)); 1942 } 1943 1944 void 1945 spa_evicting_os_register(spa_t *spa, objset_t *os) 1946 { 1947 mutex_enter(&spa->spa_evicting_os_lock); 1948 list_insert_head(&spa->spa_evicting_os_list, os); 1949 mutex_exit(&spa->spa_evicting_os_lock); 1950 } 1951 1952 void 1953 spa_evicting_os_deregister(spa_t *spa, objset_t *os) 1954 { 1955 mutex_enter(&spa->spa_evicting_os_lock); 1956 list_remove(&spa->spa_evicting_os_list, os); 1957 cv_broadcast(&spa->spa_evicting_os_cv); 1958 mutex_exit(&spa->spa_evicting_os_lock); 1959 } 1960 1961 void 1962 spa_evicting_os_wait(spa_t *spa) 1963 { 1964 mutex_enter(&spa->spa_evicting_os_lock); 1965 while (!list_is_empty(&spa->spa_evicting_os_list)) 1966 cv_wait(&spa->spa_evicting_os_cv, &spa->spa_evicting_os_lock); 1967 mutex_exit(&spa->spa_evicting_os_lock); 1968 1969 dmu_buf_user_evict_wait(); 1970 } 1971 1972 int 1973 spa_max_replication(spa_t *spa) 1974 { 1975 /* 1976 * As of SPA_VERSION == SPA_VERSION_DITTO_BLOCKS, we are able to 1977 * handle BPs with more than one DVA allocated. Set our max 1978 * replication level accordingly. 1979 */ 1980 if (spa_version(spa) < SPA_VERSION_DITTO_BLOCKS) 1981 return (1); 1982 return (MIN(SPA_DVAS_PER_BP, spa_max_replication_override)); 1983 } 1984 1985 int 1986 spa_prev_software_version(spa_t *spa) 1987 { 1988 return (spa->spa_prev_software_version); 1989 } 1990 1991 uint64_t 1992 spa_deadman_synctime(spa_t *spa) 1993 { 1994 return (spa->spa_deadman_synctime); 1995 } 1996 1997 spa_autotrim_t 1998 spa_get_autotrim(spa_t *spa) 1999 { 2000 return (spa->spa_autotrim); 2001 } 2002 2003 uint64_t 2004 spa_deadman_ziotime(spa_t *spa) 2005 { 2006 return (spa->spa_deadman_ziotime); 2007 } 2008 2009 uint64_t 2010 spa_get_deadman_failmode(spa_t *spa) 2011 { 2012 return (spa->spa_deadman_failmode); 2013 } 2014 2015 void 2016 spa_set_deadman_failmode(spa_t *spa, const char *failmode) 2017 { 2018 if (strcmp(failmode, "wait") == 0) 2019 spa->spa_deadman_failmode = ZIO_FAILURE_MODE_WAIT; 2020 else if (strcmp(failmode, "continue") == 0) 2021 spa->spa_deadman_failmode = ZIO_FAILURE_MODE_CONTINUE; 2022 else if (strcmp(failmode, "panic") == 0) 2023 spa->spa_deadman_failmode = ZIO_FAILURE_MODE_PANIC; 2024 else 2025 spa->spa_deadman_failmode = ZIO_FAILURE_MODE_WAIT; 2026 } 2027 2028 void 2029 spa_set_deadman_ziotime(hrtime_t ns) 2030 { 2031 spa_t *spa = NULL; 2032 2033 if (spa_mode_global != SPA_MODE_UNINIT) { 2034 mutex_enter(&spa_namespace_lock); 2035 while ((spa = spa_next(spa)) != NULL) 2036 spa->spa_deadman_ziotime = ns; 2037 mutex_exit(&spa_namespace_lock); 2038 } 2039 } 2040 2041 void 2042 spa_set_deadman_synctime(hrtime_t ns) 2043 { 2044 spa_t *spa = NULL; 2045 2046 if (spa_mode_global != SPA_MODE_UNINIT) { 2047 mutex_enter(&spa_namespace_lock); 2048 while ((spa = spa_next(spa)) != NULL) 2049 spa->spa_deadman_synctime = ns; 2050 mutex_exit(&spa_namespace_lock); 2051 } 2052 } 2053 2054 uint64_t 2055 dva_get_dsize_sync(spa_t *spa, const dva_t *dva) 2056 { 2057 uint64_t asize = DVA_GET_ASIZE(dva); 2058 uint64_t dsize = asize; 2059 2060 ASSERT(spa_config_held(spa, SCL_ALL, RW_READER) != 0); 2061 2062 if (asize != 0 && spa->spa_deflate) { 2063 vdev_t *vd = vdev_lookup_top(spa, DVA_GET_VDEV(dva)); 2064 if (vd != NULL) 2065 dsize = (asize >> SPA_MINBLOCKSHIFT) * 2066 vd->vdev_deflate_ratio; 2067 } 2068 2069 return (dsize); 2070 } 2071 2072 uint64_t 2073 bp_get_dsize_sync(spa_t *spa, const blkptr_t *bp) 2074 { 2075 uint64_t dsize = 0; 2076 2077 for (int d = 0; d < BP_GET_NDVAS(bp); d++) 2078 dsize += dva_get_dsize_sync(spa, &bp->blk_dva[d]); 2079 2080 return (dsize); 2081 } 2082 2083 uint64_t 2084 bp_get_dsize(spa_t *spa, const blkptr_t *bp) 2085 { 2086 uint64_t dsize = 0; 2087 2088 spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); 2089 2090 for (int d = 0; d < BP_GET_NDVAS(bp); d++) 2091 dsize += dva_get_dsize_sync(spa, &bp->blk_dva[d]); 2092 2093 spa_config_exit(spa, SCL_VDEV, FTAG); 2094 2095 return (dsize); 2096 } 2097 2098 uint64_t 2099 spa_dirty_data(spa_t *spa) 2100 { 2101 return (spa->spa_dsl_pool->dp_dirty_total); 2102 } 2103 2104 /* 2105 * ========================================================================== 2106 * SPA Import Progress Routines 2107 * ========================================================================== 2108 */ 2109 2110 typedef struct spa_import_progress { 2111 uint64_t pool_guid; /* unique id for updates */ 2112 char *pool_name; 2113 spa_load_state_t spa_load_state; 2114 uint64_t mmp_sec_remaining; /* MMP activity check */ 2115 uint64_t spa_load_max_txg; /* rewind txg */ 2116 procfs_list_node_t smh_node; 2117 } spa_import_progress_t; 2118 2119 spa_history_list_t *spa_import_progress_list = NULL; 2120 2121 static int 2122 spa_import_progress_show_header(struct seq_file *f) 2123 { 2124 seq_printf(f, "%-20s %-14s %-14s %-12s %s\n", "pool_guid", 2125 "load_state", "multihost_secs", "max_txg", 2126 "pool_name"); 2127 return (0); 2128 } 2129 2130 static int 2131 spa_import_progress_show(struct seq_file *f, void *data) 2132 { 2133 spa_import_progress_t *sip = (spa_import_progress_t *)data; 2134 2135 seq_printf(f, "%-20llu %-14llu %-14llu %-12llu %s\n", 2136 (u_longlong_t)sip->pool_guid, (u_longlong_t)sip->spa_load_state, 2137 (u_longlong_t)sip->mmp_sec_remaining, 2138 (u_longlong_t)sip->spa_load_max_txg, 2139 (sip->pool_name ? sip->pool_name : "-")); 2140 2141 return (0); 2142 } 2143 2144 /* Remove oldest elements from list until there are no more than 'size' left */ 2145 static void 2146 spa_import_progress_truncate(spa_history_list_t *shl, unsigned int size) 2147 { 2148 spa_import_progress_t *sip; 2149 while (shl->size > size) { 2150 sip = list_remove_head(&shl->procfs_list.pl_list); 2151 if (sip->pool_name) 2152 spa_strfree(sip->pool_name); 2153 kmem_free(sip, sizeof (spa_import_progress_t)); 2154 shl->size--; 2155 } 2156 2157 IMPLY(size == 0, list_is_empty(&shl->procfs_list.pl_list)); 2158 } 2159 2160 static void 2161 spa_import_progress_init(void) 2162 { 2163 spa_import_progress_list = kmem_zalloc(sizeof (spa_history_list_t), 2164 KM_SLEEP); 2165 2166 spa_import_progress_list->size = 0; 2167 2168 spa_import_progress_list->procfs_list.pl_private = 2169 spa_import_progress_list; 2170 2171 procfs_list_install("zfs", 2172 NULL, 2173 "import_progress", 2174 0644, 2175 &spa_import_progress_list->procfs_list, 2176 spa_import_progress_show, 2177 spa_import_progress_show_header, 2178 NULL, 2179 offsetof(spa_import_progress_t, smh_node)); 2180 } 2181 2182 static void 2183 spa_import_progress_destroy(void) 2184 { 2185 spa_history_list_t *shl = spa_import_progress_list; 2186 procfs_list_uninstall(&shl->procfs_list); 2187 spa_import_progress_truncate(shl, 0); 2188 procfs_list_destroy(&shl->procfs_list); 2189 kmem_free(shl, sizeof (spa_history_list_t)); 2190 } 2191 2192 int 2193 spa_import_progress_set_state(uint64_t pool_guid, 2194 spa_load_state_t load_state) 2195 { 2196 spa_history_list_t *shl = spa_import_progress_list; 2197 spa_import_progress_t *sip; 2198 int error = ENOENT; 2199 2200 if (shl->size == 0) 2201 return (0); 2202 2203 mutex_enter(&shl->procfs_list.pl_lock); 2204 for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL; 2205 sip = list_prev(&shl->procfs_list.pl_list, sip)) { 2206 if (sip->pool_guid == pool_guid) { 2207 sip->spa_load_state = load_state; 2208 error = 0; 2209 break; 2210 } 2211 } 2212 mutex_exit(&shl->procfs_list.pl_lock); 2213 2214 return (error); 2215 } 2216 2217 int 2218 spa_import_progress_set_max_txg(uint64_t pool_guid, uint64_t load_max_txg) 2219 { 2220 spa_history_list_t *shl = spa_import_progress_list; 2221 spa_import_progress_t *sip; 2222 int error = ENOENT; 2223 2224 if (shl->size == 0) 2225 return (0); 2226 2227 mutex_enter(&shl->procfs_list.pl_lock); 2228 for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL; 2229 sip = list_prev(&shl->procfs_list.pl_list, sip)) { 2230 if (sip->pool_guid == pool_guid) { 2231 sip->spa_load_max_txg = load_max_txg; 2232 error = 0; 2233 break; 2234 } 2235 } 2236 mutex_exit(&shl->procfs_list.pl_lock); 2237 2238 return (error); 2239 } 2240 2241 int 2242 spa_import_progress_set_mmp_check(uint64_t pool_guid, 2243 uint64_t mmp_sec_remaining) 2244 { 2245 spa_history_list_t *shl = spa_import_progress_list; 2246 spa_import_progress_t *sip; 2247 int error = ENOENT; 2248 2249 if (shl->size == 0) 2250 return (0); 2251 2252 mutex_enter(&shl->procfs_list.pl_lock); 2253 for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL; 2254 sip = list_prev(&shl->procfs_list.pl_list, sip)) { 2255 if (sip->pool_guid == pool_guid) { 2256 sip->mmp_sec_remaining = mmp_sec_remaining; 2257 error = 0; 2258 break; 2259 } 2260 } 2261 mutex_exit(&shl->procfs_list.pl_lock); 2262 2263 return (error); 2264 } 2265 2266 /* 2267 * A new import is in progress, add an entry. 2268 */ 2269 void 2270 spa_import_progress_add(spa_t *spa) 2271 { 2272 spa_history_list_t *shl = spa_import_progress_list; 2273 spa_import_progress_t *sip; 2274 char *poolname = NULL; 2275 2276 sip = kmem_zalloc(sizeof (spa_import_progress_t), KM_SLEEP); 2277 sip->pool_guid = spa_guid(spa); 2278 2279 (void) nvlist_lookup_string(spa->spa_config, ZPOOL_CONFIG_POOL_NAME, 2280 &poolname); 2281 if (poolname == NULL) 2282 poolname = spa_name(spa); 2283 sip->pool_name = spa_strdup(poolname); 2284 sip->spa_load_state = spa_load_state(spa); 2285 2286 mutex_enter(&shl->procfs_list.pl_lock); 2287 procfs_list_add(&shl->procfs_list, sip); 2288 shl->size++; 2289 mutex_exit(&shl->procfs_list.pl_lock); 2290 } 2291 2292 void 2293 spa_import_progress_remove(uint64_t pool_guid) 2294 { 2295 spa_history_list_t *shl = spa_import_progress_list; 2296 spa_import_progress_t *sip; 2297 2298 mutex_enter(&shl->procfs_list.pl_lock); 2299 for (sip = list_tail(&shl->procfs_list.pl_list); sip != NULL; 2300 sip = list_prev(&shl->procfs_list.pl_list, sip)) { 2301 if (sip->pool_guid == pool_guid) { 2302 if (sip->pool_name) 2303 spa_strfree(sip->pool_name); 2304 list_remove(&shl->procfs_list.pl_list, sip); 2305 shl->size--; 2306 kmem_free(sip, sizeof (spa_import_progress_t)); 2307 break; 2308 } 2309 } 2310 mutex_exit(&shl->procfs_list.pl_lock); 2311 } 2312 2313 /* 2314 * ========================================================================== 2315 * Initialization and Termination 2316 * ========================================================================== 2317 */ 2318 2319 static int 2320 spa_name_compare(const void *a1, const void *a2) 2321 { 2322 const spa_t *s1 = a1; 2323 const spa_t *s2 = a2; 2324 int s; 2325 2326 s = strcmp(s1->spa_name, s2->spa_name); 2327 2328 return (TREE_ISIGN(s)); 2329 } 2330 2331 void 2332 spa_boot_init(void) 2333 { 2334 spa_config_load(); 2335 } 2336 2337 void 2338 spa_init(spa_mode_t mode) 2339 { 2340 mutex_init(&spa_namespace_lock, NULL, MUTEX_DEFAULT, NULL); 2341 mutex_init(&spa_spare_lock, NULL, MUTEX_DEFAULT, NULL); 2342 mutex_init(&spa_l2cache_lock, NULL, MUTEX_DEFAULT, NULL); 2343 cv_init(&spa_namespace_cv, NULL, CV_DEFAULT, NULL); 2344 2345 avl_create(&spa_namespace_avl, spa_name_compare, sizeof (spa_t), 2346 offsetof(spa_t, spa_avl)); 2347 2348 avl_create(&spa_spare_avl, spa_spare_compare, sizeof (spa_aux_t), 2349 offsetof(spa_aux_t, aux_avl)); 2350 2351 avl_create(&spa_l2cache_avl, spa_l2cache_compare, sizeof (spa_aux_t), 2352 offsetof(spa_aux_t, aux_avl)); 2353 2354 spa_mode_global = mode; 2355 2356 #ifndef _KERNEL 2357 if (spa_mode_global != SPA_MODE_READ && dprintf_find_string("watch")) { 2358 struct sigaction sa; 2359 2360 sa.sa_flags = SA_SIGINFO; 2361 sigemptyset(&sa.sa_mask); 2362 sa.sa_sigaction = arc_buf_sigsegv; 2363 2364 if (sigaction(SIGSEGV, &sa, NULL) == -1) { 2365 perror("could not enable watchpoints: " 2366 "sigaction(SIGSEGV, ...) = "); 2367 } else { 2368 arc_watch = B_TRUE; 2369 } 2370 } 2371 #endif 2372 2373 fm_init(); 2374 zfs_refcount_init(); 2375 unique_init(); 2376 zfs_btree_init(); 2377 metaslab_stat_init(); 2378 ddt_init(); 2379 zio_init(); 2380 dmu_init(); 2381 zil_init(); 2382 vdev_cache_stat_init(); 2383 vdev_mirror_stat_init(); 2384 vdev_raidz_math_init(); 2385 vdev_file_init(); 2386 zfs_prop_init(); 2387 zpool_prop_init(); 2388 zpool_feature_init(); 2389 spa_config_load(); 2390 l2arc_start(); 2391 scan_init(); 2392 qat_init(); 2393 spa_import_progress_init(); 2394 } 2395 2396 void 2397 spa_fini(void) 2398 { 2399 l2arc_stop(); 2400 2401 spa_evict_all(); 2402 2403 vdev_file_fini(); 2404 vdev_cache_stat_fini(); 2405 vdev_mirror_stat_fini(); 2406 vdev_raidz_math_fini(); 2407 zil_fini(); 2408 dmu_fini(); 2409 zio_fini(); 2410 ddt_fini(); 2411 metaslab_stat_fini(); 2412 zfs_btree_fini(); 2413 unique_fini(); 2414 zfs_refcount_fini(); 2415 fm_fini(); 2416 scan_fini(); 2417 qat_fini(); 2418 spa_import_progress_destroy(); 2419 2420 avl_destroy(&spa_namespace_avl); 2421 avl_destroy(&spa_spare_avl); 2422 avl_destroy(&spa_l2cache_avl); 2423 2424 cv_destroy(&spa_namespace_cv); 2425 mutex_destroy(&spa_namespace_lock); 2426 mutex_destroy(&spa_spare_lock); 2427 mutex_destroy(&spa_l2cache_lock); 2428 } 2429 2430 /* 2431 * Return whether this pool has slogs. No locking needed. 2432 * It's not a problem if the wrong answer is returned as it's only for 2433 * performance and not correctness 2434 */ 2435 boolean_t 2436 spa_has_slogs(spa_t *spa) 2437 { 2438 return (spa->spa_log_class->mc_rotor != NULL); 2439 } 2440 2441 spa_log_state_t 2442 spa_get_log_state(spa_t *spa) 2443 { 2444 return (spa->spa_log_state); 2445 } 2446 2447 void 2448 spa_set_log_state(spa_t *spa, spa_log_state_t state) 2449 { 2450 spa->spa_log_state = state; 2451 } 2452 2453 boolean_t 2454 spa_is_root(spa_t *spa) 2455 { 2456 return (spa->spa_is_root); 2457 } 2458 2459 boolean_t 2460 spa_writeable(spa_t *spa) 2461 { 2462 return (!!(spa->spa_mode & SPA_MODE_WRITE) && spa->spa_trust_config); 2463 } 2464 2465 /* 2466 * Returns true if there is a pending sync task in any of the current 2467 * syncing txg, the current quiescing txg, or the current open txg. 2468 */ 2469 boolean_t 2470 spa_has_pending_synctask(spa_t *spa) 2471 { 2472 return (!txg_all_lists_empty(&spa->spa_dsl_pool->dp_sync_tasks) || 2473 !txg_all_lists_empty(&spa->spa_dsl_pool->dp_early_sync_tasks)); 2474 } 2475 2476 spa_mode_t 2477 spa_mode(spa_t *spa) 2478 { 2479 return (spa->spa_mode); 2480 } 2481 2482 uint64_t 2483 spa_bootfs(spa_t *spa) 2484 { 2485 return (spa->spa_bootfs); 2486 } 2487 2488 uint64_t 2489 spa_delegation(spa_t *spa) 2490 { 2491 return (spa->spa_delegation); 2492 } 2493 2494 objset_t * 2495 spa_meta_objset(spa_t *spa) 2496 { 2497 return (spa->spa_meta_objset); 2498 } 2499 2500 enum zio_checksum 2501 spa_dedup_checksum(spa_t *spa) 2502 { 2503 return (spa->spa_dedup_checksum); 2504 } 2505 2506 /* 2507 * Reset pool scan stat per scan pass (or reboot). 2508 */ 2509 void 2510 spa_scan_stat_init(spa_t *spa) 2511 { 2512 /* data not stored on disk */ 2513 spa->spa_scan_pass_start = gethrestime_sec(); 2514 if (dsl_scan_is_paused_scrub(spa->spa_dsl_pool->dp_scan)) 2515 spa->spa_scan_pass_scrub_pause = spa->spa_scan_pass_start; 2516 else 2517 spa->spa_scan_pass_scrub_pause = 0; 2518 spa->spa_scan_pass_scrub_spent_paused = 0; 2519 spa->spa_scan_pass_exam = 0; 2520 spa->spa_scan_pass_issued = 0; 2521 vdev_scan_stat_init(spa->spa_root_vdev); 2522 } 2523 2524 /* 2525 * Get scan stats for zpool status reports 2526 */ 2527 int 2528 spa_scan_get_stats(spa_t *spa, pool_scan_stat_t *ps) 2529 { 2530 dsl_scan_t *scn = spa->spa_dsl_pool ? spa->spa_dsl_pool->dp_scan : NULL; 2531 2532 if (scn == NULL || scn->scn_phys.scn_func == POOL_SCAN_NONE) 2533 return (SET_ERROR(ENOENT)); 2534 bzero(ps, sizeof (pool_scan_stat_t)); 2535 2536 /* data stored on disk */ 2537 ps->pss_func = scn->scn_phys.scn_func; 2538 ps->pss_state = scn->scn_phys.scn_state; 2539 ps->pss_start_time = scn->scn_phys.scn_start_time; 2540 ps->pss_end_time = scn->scn_phys.scn_end_time; 2541 ps->pss_to_examine = scn->scn_phys.scn_to_examine; 2542 ps->pss_examined = scn->scn_phys.scn_examined; 2543 ps->pss_to_process = scn->scn_phys.scn_to_process; 2544 ps->pss_processed = scn->scn_phys.scn_processed; 2545 ps->pss_errors = scn->scn_phys.scn_errors; 2546 2547 /* data not stored on disk */ 2548 ps->pss_pass_exam = spa->spa_scan_pass_exam; 2549 ps->pss_pass_start = spa->spa_scan_pass_start; 2550 ps->pss_pass_scrub_pause = spa->spa_scan_pass_scrub_pause; 2551 ps->pss_pass_scrub_spent_paused = spa->spa_scan_pass_scrub_spent_paused; 2552 ps->pss_pass_issued = spa->spa_scan_pass_issued; 2553 ps->pss_issued = 2554 scn->scn_issued_before_pass + spa->spa_scan_pass_issued; 2555 2556 return (0); 2557 } 2558 2559 int 2560 spa_maxblocksize(spa_t *spa) 2561 { 2562 if (spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_BLOCKS)) 2563 return (SPA_MAXBLOCKSIZE); 2564 else 2565 return (SPA_OLD_MAXBLOCKSIZE); 2566 } 2567 2568 2569 /* 2570 * Returns the txg that the last device removal completed. No indirect mappings 2571 * have been added since this txg. 2572 */ 2573 uint64_t 2574 spa_get_last_removal_txg(spa_t *spa) 2575 { 2576 uint64_t vdevid; 2577 uint64_t ret = -1ULL; 2578 2579 spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); 2580 /* 2581 * sr_prev_indirect_vdev is only modified while holding all the 2582 * config locks, so it is sufficient to hold SCL_VDEV as reader when 2583 * examining it. 2584 */ 2585 vdevid = spa->spa_removing_phys.sr_prev_indirect_vdev; 2586 2587 while (vdevid != -1ULL) { 2588 vdev_t *vd = vdev_lookup_top(spa, vdevid); 2589 vdev_indirect_births_t *vib = vd->vdev_indirect_births; 2590 2591 ASSERT3P(vd->vdev_ops, ==, &vdev_indirect_ops); 2592 2593 /* 2594 * If the removal did not remap any data, we don't care. 2595 */ 2596 if (vdev_indirect_births_count(vib) != 0) { 2597 ret = vdev_indirect_births_last_entry_txg(vib); 2598 break; 2599 } 2600 2601 vdevid = vd->vdev_indirect_config.vic_prev_indirect_vdev; 2602 } 2603 spa_config_exit(spa, SCL_VDEV, FTAG); 2604 2605 IMPLY(ret != -1ULL, 2606 spa_feature_is_active(spa, SPA_FEATURE_DEVICE_REMOVAL)); 2607 2608 return (ret); 2609 } 2610 2611 int 2612 spa_maxdnodesize(spa_t *spa) 2613 { 2614 if (spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_DNODE)) 2615 return (DNODE_MAX_SIZE); 2616 else 2617 return (DNODE_MIN_SIZE); 2618 } 2619 2620 boolean_t 2621 spa_multihost(spa_t *spa) 2622 { 2623 return (spa->spa_multihost ? B_TRUE : B_FALSE); 2624 } 2625 2626 uint32_t 2627 spa_get_hostid(spa_t *spa) 2628 { 2629 return (spa->spa_hostid); 2630 } 2631 2632 boolean_t 2633 spa_trust_config(spa_t *spa) 2634 { 2635 return (spa->spa_trust_config); 2636 } 2637 2638 uint64_t 2639 spa_missing_tvds_allowed(spa_t *spa) 2640 { 2641 return (spa->spa_missing_tvds_allowed); 2642 } 2643 2644 space_map_t * 2645 spa_syncing_log_sm(spa_t *spa) 2646 { 2647 return (spa->spa_syncing_log_sm); 2648 } 2649 2650 void 2651 spa_set_missing_tvds(spa_t *spa, uint64_t missing) 2652 { 2653 spa->spa_missing_tvds = missing; 2654 } 2655 2656 /* 2657 * Return the pool state string ("ONLINE", "DEGRADED", "SUSPENDED", etc). 2658 */ 2659 const char * 2660 spa_state_to_name(spa_t *spa) 2661 { 2662 ASSERT3P(spa, !=, NULL); 2663 2664 /* 2665 * it is possible for the spa to exist, without root vdev 2666 * as the spa transitions during import/export 2667 */ 2668 vdev_t *rvd = spa->spa_root_vdev; 2669 if (rvd == NULL) { 2670 return ("TRANSITIONING"); 2671 } 2672 vdev_state_t state = rvd->vdev_state; 2673 vdev_aux_t aux = rvd->vdev_stat.vs_aux; 2674 2675 if (spa_suspended(spa) && 2676 (spa_get_failmode(spa) != ZIO_FAILURE_MODE_CONTINUE)) 2677 return ("SUSPENDED"); 2678 2679 switch (state) { 2680 case VDEV_STATE_CLOSED: 2681 case VDEV_STATE_OFFLINE: 2682 return ("OFFLINE"); 2683 case VDEV_STATE_REMOVED: 2684 return ("REMOVED"); 2685 case VDEV_STATE_CANT_OPEN: 2686 if (aux == VDEV_AUX_CORRUPT_DATA || aux == VDEV_AUX_BAD_LOG) 2687 return ("FAULTED"); 2688 else if (aux == VDEV_AUX_SPLIT_POOL) 2689 return ("SPLIT"); 2690 else 2691 return ("UNAVAIL"); 2692 case VDEV_STATE_FAULTED: 2693 return ("FAULTED"); 2694 case VDEV_STATE_DEGRADED: 2695 return ("DEGRADED"); 2696 case VDEV_STATE_HEALTHY: 2697 return ("ONLINE"); 2698 default: 2699 break; 2700 } 2701 2702 return ("UNKNOWN"); 2703 } 2704 2705 boolean_t 2706 spa_top_vdevs_spacemap_addressable(spa_t *spa) 2707 { 2708 vdev_t *rvd = spa->spa_root_vdev; 2709 for (uint64_t c = 0; c < rvd->vdev_children; c++) { 2710 if (!vdev_is_spacemap_addressable(rvd->vdev_child[c])) 2711 return (B_FALSE); 2712 } 2713 return (B_TRUE); 2714 } 2715 2716 boolean_t 2717 spa_has_checkpoint(spa_t *spa) 2718 { 2719 return (spa->spa_checkpoint_txg != 0); 2720 } 2721 2722 boolean_t 2723 spa_importing_readonly_checkpoint(spa_t *spa) 2724 { 2725 return ((spa->spa_import_flags & ZFS_IMPORT_CHECKPOINT) && 2726 spa->spa_mode == SPA_MODE_READ); 2727 } 2728 2729 uint64_t 2730 spa_min_claim_txg(spa_t *spa) 2731 { 2732 uint64_t checkpoint_txg = spa->spa_uberblock.ub_checkpoint_txg; 2733 2734 if (checkpoint_txg != 0) 2735 return (checkpoint_txg + 1); 2736 2737 return (spa->spa_first_txg); 2738 } 2739 2740 /* 2741 * If there is a checkpoint, async destroys may consume more space from 2742 * the pool instead of freeing it. In an attempt to save the pool from 2743 * getting suspended when it is about to run out of space, we stop 2744 * processing async destroys. 2745 */ 2746 boolean_t 2747 spa_suspend_async_destroy(spa_t *spa) 2748 { 2749 dsl_pool_t *dp = spa_get_dsl(spa); 2750 2751 uint64_t unreserved = dsl_pool_unreserved_space(dp, 2752 ZFS_SPACE_CHECK_EXTRA_RESERVED); 2753 uint64_t used = dsl_dir_phys(dp->dp_root_dir)->dd_used_bytes; 2754 uint64_t avail = (unreserved > used) ? (unreserved - used) : 0; 2755 2756 if (spa_has_checkpoint(spa) && avail == 0) 2757 return (B_TRUE); 2758 2759 return (B_FALSE); 2760 } 2761 2762 #if defined(_KERNEL) 2763 2764 int 2765 param_set_deadman_failmode_common(const char *val) 2766 { 2767 spa_t *spa = NULL; 2768 char *p; 2769 2770 if (val == NULL) 2771 return (SET_ERROR(EINVAL)); 2772 2773 if ((p = strchr(val, '\n')) != NULL) 2774 *p = '\0'; 2775 2776 if (strcmp(val, "wait") != 0 && strcmp(val, "continue") != 0 && 2777 strcmp(val, "panic")) 2778 return (SET_ERROR(EINVAL)); 2779 2780 if (spa_mode_global != SPA_MODE_UNINIT) { 2781 mutex_enter(&spa_namespace_lock); 2782 while ((spa = spa_next(spa)) != NULL) 2783 spa_set_deadman_failmode(spa, val); 2784 mutex_exit(&spa_namespace_lock); 2785 } 2786 2787 return (0); 2788 } 2789 #endif 2790 2791 /* Namespace manipulation */ 2792 EXPORT_SYMBOL(spa_lookup); 2793 EXPORT_SYMBOL(spa_add); 2794 EXPORT_SYMBOL(spa_remove); 2795 EXPORT_SYMBOL(spa_next); 2796 2797 /* Refcount functions */ 2798 EXPORT_SYMBOL(spa_open_ref); 2799 EXPORT_SYMBOL(spa_close); 2800 EXPORT_SYMBOL(spa_refcount_zero); 2801 2802 /* Pool configuration lock */ 2803 EXPORT_SYMBOL(spa_config_tryenter); 2804 EXPORT_SYMBOL(spa_config_enter); 2805 EXPORT_SYMBOL(spa_config_exit); 2806 EXPORT_SYMBOL(spa_config_held); 2807 2808 /* Pool vdev add/remove lock */ 2809 EXPORT_SYMBOL(spa_vdev_enter); 2810 EXPORT_SYMBOL(spa_vdev_exit); 2811 2812 /* Pool vdev state change lock */ 2813 EXPORT_SYMBOL(spa_vdev_state_enter); 2814 EXPORT_SYMBOL(spa_vdev_state_exit); 2815 2816 /* Accessor functions */ 2817 EXPORT_SYMBOL(spa_shutting_down); 2818 EXPORT_SYMBOL(spa_get_dsl); 2819 EXPORT_SYMBOL(spa_get_rootblkptr); 2820 EXPORT_SYMBOL(spa_set_rootblkptr); 2821 EXPORT_SYMBOL(spa_altroot); 2822 EXPORT_SYMBOL(spa_sync_pass); 2823 EXPORT_SYMBOL(spa_name); 2824 EXPORT_SYMBOL(spa_guid); 2825 EXPORT_SYMBOL(spa_last_synced_txg); 2826 EXPORT_SYMBOL(spa_first_txg); 2827 EXPORT_SYMBOL(spa_syncing_txg); 2828 EXPORT_SYMBOL(spa_version); 2829 EXPORT_SYMBOL(spa_state); 2830 EXPORT_SYMBOL(spa_load_state); 2831 EXPORT_SYMBOL(spa_freeze_txg); 2832 EXPORT_SYMBOL(spa_get_dspace); 2833 EXPORT_SYMBOL(spa_update_dspace); 2834 EXPORT_SYMBOL(spa_deflate); 2835 EXPORT_SYMBOL(spa_normal_class); 2836 EXPORT_SYMBOL(spa_log_class); 2837 EXPORT_SYMBOL(spa_special_class); 2838 EXPORT_SYMBOL(spa_preferred_class); 2839 EXPORT_SYMBOL(spa_max_replication); 2840 EXPORT_SYMBOL(spa_prev_software_version); 2841 EXPORT_SYMBOL(spa_get_failmode); 2842 EXPORT_SYMBOL(spa_suspended); 2843 EXPORT_SYMBOL(spa_bootfs); 2844 EXPORT_SYMBOL(spa_delegation); 2845 EXPORT_SYMBOL(spa_meta_objset); 2846 EXPORT_SYMBOL(spa_maxblocksize); 2847 EXPORT_SYMBOL(spa_maxdnodesize); 2848 2849 /* Miscellaneous support routines */ 2850 EXPORT_SYMBOL(spa_guid_exists); 2851 EXPORT_SYMBOL(spa_strdup); 2852 EXPORT_SYMBOL(spa_strfree); 2853 EXPORT_SYMBOL(spa_get_random); 2854 EXPORT_SYMBOL(spa_generate_guid); 2855 EXPORT_SYMBOL(snprintf_blkptr); 2856 EXPORT_SYMBOL(spa_freeze); 2857 EXPORT_SYMBOL(spa_upgrade); 2858 EXPORT_SYMBOL(spa_evict_all); 2859 EXPORT_SYMBOL(spa_lookup_by_guid); 2860 EXPORT_SYMBOL(spa_has_spare); 2861 EXPORT_SYMBOL(dva_get_dsize_sync); 2862 EXPORT_SYMBOL(bp_get_dsize_sync); 2863 EXPORT_SYMBOL(bp_get_dsize); 2864 EXPORT_SYMBOL(spa_has_slogs); 2865 EXPORT_SYMBOL(spa_is_root); 2866 EXPORT_SYMBOL(spa_writeable); 2867 EXPORT_SYMBOL(spa_mode); 2868 EXPORT_SYMBOL(spa_namespace_lock); 2869 EXPORT_SYMBOL(spa_trust_config); 2870 EXPORT_SYMBOL(spa_missing_tvds_allowed); 2871 EXPORT_SYMBOL(spa_set_missing_tvds); 2872 EXPORT_SYMBOL(spa_state_to_name); 2873 EXPORT_SYMBOL(spa_importing_readonly_checkpoint); 2874 EXPORT_SYMBOL(spa_min_claim_txg); 2875 EXPORT_SYMBOL(spa_suspend_async_destroy); 2876 EXPORT_SYMBOL(spa_has_checkpoint); 2877 EXPORT_SYMBOL(spa_top_vdevs_spacemap_addressable); 2878 2879 ZFS_MODULE_PARAM(zfs, zfs_, flags, UINT, ZMOD_RW, 2880 "Set additional debugging flags"); 2881 2882 ZFS_MODULE_PARAM(zfs, zfs_, recover, INT, ZMOD_RW, 2883 "Set to attempt to recover from fatal errors"); 2884 2885 ZFS_MODULE_PARAM(zfs, zfs_, free_leak_on_eio, INT, ZMOD_RW, 2886 "Set to ignore IO errors during free and permanently leak the space"); 2887 2888 ZFS_MODULE_PARAM(zfs, zfs_, deadman_checktime_ms, ULONG, ZMOD_RW, 2889 "Dead I/O check interval in milliseconds"); 2890 2891 ZFS_MODULE_PARAM(zfs, zfs_, deadman_enabled, INT, ZMOD_RW, 2892 "Enable deadman timer"); 2893 2894 ZFS_MODULE_PARAM(zfs_spa, spa_, asize_inflation, INT, ZMOD_RW, 2895 "SPA size estimate multiplication factor"); 2896 2897 ZFS_MODULE_PARAM(zfs, zfs_, ddt_data_is_special, INT, ZMOD_RW, 2898 "Place DDT data into the special class"); 2899 2900 ZFS_MODULE_PARAM(zfs, zfs_, user_indirect_is_special, INT, ZMOD_RW, 2901 "Place user data indirect blocks into the special class"); 2902 2903 /* BEGIN CSTYLED */ 2904 ZFS_MODULE_PARAM_CALL(zfs_deadman, zfs_deadman_, failmode, 2905 param_set_deadman_failmode, param_get_charp, ZMOD_RW, 2906 "Failmode for deadman timer"); 2907 2908 ZFS_MODULE_PARAM_CALL(zfs_deadman, zfs_deadman_, synctime_ms, 2909 param_set_deadman_synctime, param_get_ulong, ZMOD_RW, 2910 "Pool sync expiration time in milliseconds"); 2911 2912 ZFS_MODULE_PARAM_CALL(zfs_deadman, zfs_deadman_, ziotime_ms, 2913 param_set_deadman_ziotime, param_get_ulong, ZMOD_RW, 2914 "IO expiration time in milliseconds"); 2915 2916 ZFS_MODULE_PARAM(zfs, zfs_, special_class_metadata_reserve_pct, INT, ZMOD_RW, 2917 "Small file blocks in special vdevs depends on this much " 2918 "free space available"); 2919 /* END CSTYLED */ 2920 2921 ZFS_MODULE_PARAM_CALL(zfs_spa, spa_, slop_shift, param_set_slop_shift, 2922 param_get_int, ZMOD_RW, "Reserved free space in pool"); 2923