1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or https://opensource.org/licenses/CDDL-1.0. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 /* 22 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. 23 * Copyright (c) 2018 by Delphix. All rights reserved. 24 */ 25 26 #ifndef _LIBZUTIL_H 27 #define _LIBZUTIL_H extern __attribute__((visibility("default"))) 28 29 #include <sys/nvpair.h> 30 #include <sys/fs/zfs.h> 31 32 #ifdef __cplusplus 33 extern "C" { 34 #endif 35 36 /* 37 * Default wait time in milliseconds for a device name to be created. 38 */ 39 #define DISK_LABEL_WAIT (30 * 1000) /* 30 seconds */ 40 41 42 /* 43 * Pool Config Operations 44 * 45 * These are specific to the library libzfs or libzpool instance. 46 */ 47 typedef nvlist_t *refresh_config_func_t(void *, nvlist_t *); 48 49 typedef int pool_active_func_t(void *, const char *, uint64_t, boolean_t *); 50 51 typedef const struct pool_config_ops { 52 refresh_config_func_t *pco_refresh_config; 53 pool_active_func_t *pco_pool_active; 54 } pool_config_ops_t; 55 56 /* 57 * An instance of pool_config_ops_t is expected in the caller's binary. 58 */ 59 _LIBZUTIL_H pool_config_ops_t libzfs_config_ops; 60 _LIBZUTIL_H pool_config_ops_t libzpool_config_ops; 61 62 typedef enum lpc_error { 63 LPC_SUCCESS = 0, /* no error -- success */ 64 LPC_BADCACHE = 2000, /* out of memory */ 65 LPC_BADPATH, /* must be an absolute path */ 66 LPC_NOMEM, /* out of memory */ 67 LPC_EACCESS, /* some devices require root privileges */ 68 LPC_UNKNOWN 69 } lpc_error_t; 70 71 typedef struct importargs { 72 char **path; /* a list of paths to search */ 73 int paths; /* number of paths to search */ 74 const char *poolname; /* name of a pool to find */ 75 uint64_t guid; /* guid of a pool to find */ 76 const char *cachefile; /* cachefile to use for import */ 77 boolean_t can_be_active; /* can the pool be active? */ 78 boolean_t scan; /* prefer scanning to libblkid cache */ 79 nvlist_t *policy; /* load policy (max txg, rewind, etc.) */ 80 } importargs_t; 81 82 typedef struct libpc_handle { 83 int lpc_error; 84 boolean_t lpc_printerr; 85 boolean_t lpc_open_access_error; 86 boolean_t lpc_desc_active; 87 char lpc_desc[1024]; 88 pool_config_ops_t *lpc_ops; 89 void *lpc_lib_handle; 90 } libpc_handle_t; 91 92 _LIBZUTIL_H const char *libpc_error_description(libpc_handle_t *); 93 _LIBZUTIL_H nvlist_t *zpool_search_import(libpc_handle_t *, importargs_t *); 94 _LIBZUTIL_H int zpool_find_config(libpc_handle_t *, const char *, nvlist_t **, 95 importargs_t *); 96 97 _LIBZUTIL_H const char * const * zpool_default_search_paths(size_t *count); 98 _LIBZUTIL_H int zpool_read_label(int, nvlist_t **, int *); 99 _LIBZUTIL_H int zpool_label_disk_wait(const char *, int); 100 _LIBZUTIL_H int zpool_disk_wait(const char *); 101 102 struct udev_device; 103 104 _LIBZUTIL_H int zfs_device_get_devid(struct udev_device *, char *, size_t); 105 _LIBZUTIL_H int zfs_device_get_physical(struct udev_device *, char *, size_t); 106 107 _LIBZUTIL_H void update_vdev_config_dev_strs(nvlist_t *); 108 109 /* 110 * Default device paths 111 */ 112 #define DISK_ROOT "/dev" 113 #define UDISK_ROOT "/dev/disk" 114 #define ZVOL_ROOT "/dev/zvol" 115 116 _LIBZUTIL_H int zfs_append_partition(char *path, size_t max_len); 117 _LIBZUTIL_H int zfs_resolve_shortname(const char *name, char *path, 118 size_t pathlen); 119 120 _LIBZUTIL_H char *zfs_strip_partition(const char *); 121 _LIBZUTIL_H const char *zfs_strip_path(const char *); 122 123 _LIBZUTIL_H int zfs_strcmp_pathname(const char *, const char *, int); 124 125 _LIBZUTIL_H boolean_t zfs_dev_is_dm(const char *); 126 _LIBZUTIL_H boolean_t zfs_dev_is_whole_disk(const char *); 127 _LIBZUTIL_H int zfs_dev_flush(int); 128 _LIBZUTIL_H char *zfs_get_underlying_path(const char *); 129 _LIBZUTIL_H char *zfs_get_enclosure_sysfs_path(const char *); 130 131 _LIBZUTIL_H boolean_t is_mpath_whole_disk(const char *); 132 133 _LIBZUTIL_H boolean_t zfs_isnumber(const char *); 134 135 /* 136 * Formats for iostat numbers. Examples: "12K", "30ms", "4B", "2321234", "-". 137 * 138 * ZFS_NICENUM_1024: Print kilo, mega, tera, peta, exa.. 139 * ZFS_NICENUM_BYTES: Print single bytes ("13B"), kilo, mega, tera... 140 * ZFS_NICENUM_TIME: Print nanosecs, microsecs, millisecs, seconds... 141 * ZFS_NICENUM_RAW: Print the raw number without any formatting 142 * ZFS_NICENUM_RAWTIME: Same as RAW, but print dashes ('-') for zero. 143 */ 144 enum zfs_nicenum_format { 145 ZFS_NICENUM_1024 = 0, 146 ZFS_NICENUM_BYTES = 1, 147 ZFS_NICENUM_TIME = 2, 148 ZFS_NICENUM_RAW = 3, 149 ZFS_NICENUM_RAWTIME = 4 150 }; 151 152 /* 153 * Convert a number to a human-readable form. 154 */ 155 _LIBZUTIL_H void zfs_nicebytes(uint64_t, char *, size_t); 156 _LIBZUTIL_H void zfs_nicenum(uint64_t, char *, size_t); 157 _LIBZUTIL_H void zfs_nicenum_format(uint64_t, char *, size_t, 158 enum zfs_nicenum_format); 159 _LIBZUTIL_H void zfs_nicetime(uint64_t, char *, size_t); 160 _LIBZUTIL_H void zfs_niceraw(uint64_t, char *, size_t); 161 162 #define nicenum(num, buf, size) zfs_nicenum(num, buf, size) 163 164 _LIBZUTIL_H void zpool_dump_ddt(const ddt_stat_t *, const ddt_histogram_t *); 165 _LIBZUTIL_H int zpool_history_unpack(char *, uint64_t, uint64_t *, nvlist_t ***, 166 uint_t *); 167 _LIBZUTIL_H void fsleep(float sec); 168 _LIBZUTIL_H int zpool_getenv_int(const char *env, int default_val); 169 170 struct zfs_cmd; 171 172 /* 173 * List of colors to use 174 */ 175 #define ANSI_BLACK "\033[0;30m" 176 #define ANSI_RED "\033[0;31m" 177 #define ANSI_GREEN "\033[0;32m" 178 #define ANSI_YELLOW "\033[0;33m" 179 #define ANSI_BLUE "\033[0;34m" 180 #define ANSI_BOLD_BLUE "\033[1;34m" /* light blue */ 181 #define ANSI_MAGENTA "\033[0;35m" 182 #define ANSI_CYAN "\033[0;36m" 183 #define ANSI_GRAY "\033[0;37m" 184 185 #define ANSI_RESET "\033[0m" 186 #define ANSI_BOLD "\033[1m" 187 188 _LIBZUTIL_H int use_color(void); 189 _LIBZUTIL_H void color_start(const char *color); 190 _LIBZUTIL_H void color_end(void); 191 _LIBZUTIL_H int printf_color(const char *color, const char *format, ...); 192 193 _LIBZUTIL_H const char *zfs_basename(const char *path); 194 _LIBZUTIL_H ssize_t zfs_dirnamelen(const char *path); 195 #ifdef __linux__ 196 extern char **environ; 197 _LIBZUTIL_H void zfs_setproctitle_init(int argc, char *argv[], char *envp[]); 198 _LIBZUTIL_H void zfs_setproctitle(const char *fmt, ...); 199 #else 200 #define zfs_setproctitle(fmt, ...) setproctitle(fmt, ##__VA_ARGS__) 201 #define zfs_setproctitle_init(x, y, z) ((void)0) 202 #endif 203 204 /* 205 * These functions are used by the ZFS libraries and cmd/zpool code, but are 206 * not exported in the ABI. 207 */ 208 typedef int (*pool_vdev_iter_f)(void *, nvlist_t *, void *); 209 int for_each_vdev_cb(void *zhp, nvlist_t *nv, pool_vdev_iter_f func, 210 void *data); 211 int for_each_vdev_macro_helper_func(void *zhp_data, nvlist_t *nv, void *data); 212 int for_each_real_leaf_vdev_macro_helper_func(void *zhp_data, nvlist_t *nv, 213 void *data); 214 /* 215 * Often you'll want to iterate over all the vdevs in the pool, but don't want 216 * to use for_each_vdev() since it requires a callback function. 217 * 218 * Instead you can use FOR_EACH_VDEV(): 219 * 220 * zpool_handle_t *zhp // Assume this is initialized 221 * nvlist_t *nv 222 * ... 223 * FOR_EACH_VDEV(zhp, nv) { 224 * const char *path = NULL; 225 * nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path); 226 * printf("Looking at vdev %s\n", path); 227 * } 228 * 229 * Note: FOR_EACH_VDEV runs in O(n^2) time where n = number of vdevs. However, 230 * there's an upper limit of 256 vdevs per dRAID top-level vdevs (TLDs), 255 for 231 * raidz2 TLDs, a real world limit of ~500 vdevs for mirrors, so this shouldn't 232 * really be an issue. 233 * 234 * Here are some micro-benchmarks of a complete FOR_EACH_VDEV loop on a RAID0 235 * pool: 236 * 237 * 100 vdevs = 0.7ms 238 * 500 vdevs = 17ms 239 * 750 vdevs = 40ms 240 * 1000 vdevs = 82ms 241 * 242 * The '__nv += 0' at the end of the for() loop gets around a "comma or 243 * semicolon followed by non-blank" checkstyle error. Note on most compliers 244 * the '__nv += 0' can just be replaced with 'NULL', but gcc on Centos 7 245 * will give a 'warning: statement with no effect' error if you do that. 246 */ 247 #define __FOR_EACH_VDEV(__zhp, __nv, __func) { \ 248 __nv = zpool_get_config(__zhp, NULL); \ 249 VERIFY0(nvlist_lookup_nvlist(__nv, ZPOOL_CONFIG_VDEV_TREE, &__nv)); \ 250 } \ 251 for (nvlist_t *__root_nv = __nv, *__state = (nvlist_t *)0; \ 252 for_each_vdev_cb(&__state, __root_nv, __func, &__nv) == 1; \ 253 __nv += 0) 254 255 #define FOR_EACH_VDEV(__zhp, __nv) \ 256 __FOR_EACH_VDEV(__zhp, __nv, for_each_vdev_macro_helper_func) 257 258 /* 259 * "real leaf" vdevs are leaf vdevs that are real devices (disks or files). 260 * This excludes leaf vdevs like like draid spares. 261 */ 262 #define FOR_EACH_REAL_LEAF_VDEV(__zhp, __nv) \ 263 __FOR_EACH_VDEV(__zhp, __nv, for_each_real_leaf_vdev_macro_helper_func) 264 265 int for_each_vdev_in_nvlist(nvlist_t *nvroot, pool_vdev_iter_f func, 266 void *data); 267 void update_vdevs_config_dev_sysfs_path(nvlist_t *config); 268 _LIBZUTIL_H void update_vdev_config_dev_sysfs_path(nvlist_t *nv, 269 const char *path, const char *key); 270 #ifdef __cplusplus 271 } 272 #endif 273 274 #endif /* _LIBZUTIL_H */ 275