1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License Version 1.0 (CDDL-1.0). 6 * You can obtain a copy of the license from the top-level file 7 * "OPENSOLARIS.LICENSE" or at <http://opensource.org/licenses/CDDL-1.0>. 8 * You may not use this file except in compliance with the license. 9 * 10 * CDDL HEADER END 11 */ 12 13 /* 14 * Copyright (c) 2016, 2017, Intel Corporation. 15 */ 16 17 #ifdef HAVE_LIBUDEV 18 19 #include <errno.h> 20 #include <fcntl.h> 21 #include <libnvpair.h> 22 #include <libudev.h> 23 #include <libzfs.h> 24 #include <libzutil.h> 25 #include <pthread.h> 26 #include <stdlib.h> 27 #include <string.h> 28 29 #include <sys/sysevent/eventdefs.h> 30 #include <sys/sysevent/dev.h> 31 32 #include "zed_log.h" 33 #include "zed_disk_event.h" 34 #include "agents/zfs_agents.h" 35 36 /* 37 * Portions of ZED need to see disk events for disks belonging to ZFS pools. 38 * A libudev monitor is established to monitor block device actions and pass 39 * them on to internal ZED logic modules. Initially, zfs_mod.c is the only 40 * consumer and is the Linux equivalent for the illumos syseventd ZFS SLM 41 * module responsible for handling disk events for ZFS. 42 */ 43 44 pthread_t g_mon_tid; 45 struct udev *g_udev; 46 struct udev_monitor *g_mon; 47 48 49 #define DEV_BYID_PATH "/dev/disk/by-id/" 50 51 /* 64MB is minimum usable disk for ZFS */ 52 #define MINIMUM_SECTORS 131072ULL 53 54 55 /* 56 * Post disk event to SLM module 57 * 58 * occurs in the context of monitor thread 59 */ 60 static void 61 zed_udev_event(const char *class, const char *subclass, nvlist_t *nvl) 62 { 63 const char *strval; 64 uint64_t numval; 65 66 zed_log_msg(LOG_INFO, "zed_disk_event:"); 67 zed_log_msg(LOG_INFO, "\tclass: %s", class); 68 zed_log_msg(LOG_INFO, "\tsubclass: %s", subclass); 69 if (nvlist_lookup_string(nvl, DEV_NAME, &strval) == 0) 70 zed_log_msg(LOG_INFO, "\t%s: %s", DEV_NAME, strval); 71 if (nvlist_lookup_string(nvl, DEV_PATH, &strval) == 0) 72 zed_log_msg(LOG_INFO, "\t%s: %s", DEV_PATH, strval); 73 if (nvlist_lookup_string(nvl, DEV_IDENTIFIER, &strval) == 0) 74 zed_log_msg(LOG_INFO, "\t%s: %s", DEV_IDENTIFIER, strval); 75 if (nvlist_lookup_boolean(nvl, DEV_IS_PART) == B_TRUE) 76 zed_log_msg(LOG_INFO, "\t%s: B_TRUE", DEV_IS_PART); 77 if (nvlist_lookup_string(nvl, DEV_PHYS_PATH, &strval) == 0) 78 zed_log_msg(LOG_INFO, "\t%s: %s", DEV_PHYS_PATH, strval); 79 if (nvlist_lookup_uint64(nvl, DEV_SIZE, &numval) == 0) 80 zed_log_msg(LOG_INFO, "\t%s: %llu", DEV_SIZE, numval); 81 if (nvlist_lookup_uint64(nvl, DEV_PARENT_SIZE, &numval) == 0) 82 zed_log_msg(LOG_INFO, "\t%s: %llu", DEV_PARENT_SIZE, numval); 83 if (nvlist_lookup_uint64(nvl, ZFS_EV_POOL_GUID, &numval) == 0) 84 zed_log_msg(LOG_INFO, "\t%s: %llu", ZFS_EV_POOL_GUID, numval); 85 if (nvlist_lookup_uint64(nvl, ZFS_EV_VDEV_GUID, &numval) == 0) 86 zed_log_msg(LOG_INFO, "\t%s: %llu", ZFS_EV_VDEV_GUID, numval); 87 88 (void) zfs_agent_post_event(class, subclass, nvl); 89 } 90 91 /* 92 * dev_event_nvlist: place event schema into an nv pair list 93 * 94 * NAME VALUE (example) 95 * -------------- -------------------------------------------------------- 96 * DEV_NAME /dev/sdl 97 * DEV_PATH /devices/pci0000:00/0000:00:03.0/0000:04:00.0/host0/... 98 * DEV_IDENTIFIER ata-Hitachi_HTS725050A9A362_100601PCG420VLJ37DMC 99 * DEV_PHYS_PATH pci-0000:04:00.0-sas-0x4433221101000000-lun-0 100 * DEV_IS_PART --- 101 * DEV_SIZE 500107862016 102 * ZFS_EV_POOL_GUID 17523635698032189180 103 * ZFS_EV_VDEV_GUID 14663607734290803088 104 */ 105 static nvlist_t * 106 dev_event_nvlist(struct udev_device *dev) 107 { 108 nvlist_t *nvl; 109 char strval[128]; 110 const char *value, *path; 111 uint64_t guid; 112 113 if (nvlist_alloc(&nvl, NV_UNIQUE_NAME, 0) != 0) 114 return (NULL); 115 116 if (zfs_device_get_devid(dev, strval, sizeof (strval)) == 0) 117 (void) nvlist_add_string(nvl, DEV_IDENTIFIER, strval); 118 if (zfs_device_get_physical(dev, strval, sizeof (strval)) == 0) 119 (void) nvlist_add_string(nvl, DEV_PHYS_PATH, strval); 120 if ((path = udev_device_get_devnode(dev)) != NULL) 121 (void) nvlist_add_string(nvl, DEV_NAME, path); 122 if ((value = udev_device_get_devpath(dev)) != NULL) 123 (void) nvlist_add_string(nvl, DEV_PATH, value); 124 value = udev_device_get_devtype(dev); 125 if ((value != NULL && strcmp("partition", value) == 0) || 126 (udev_device_get_property_value(dev, "ID_PART_ENTRY_NUMBER") 127 != NULL)) { 128 (void) nvlist_add_boolean(nvl, DEV_IS_PART); 129 } 130 if ((value = udev_device_get_sysattr_value(dev, "size")) != NULL) { 131 uint64_t numval = DEV_BSIZE; 132 133 numval *= strtoull(value, NULL, 10); 134 (void) nvlist_add_uint64(nvl, DEV_SIZE, numval); 135 136 /* 137 * If the device has a parent, then get the parent block 138 * device's size as well. For example, /dev/sda1's parent 139 * is /dev/sda. 140 */ 141 struct udev_device *parent_dev = udev_device_get_parent(dev); 142 if ((value = udev_device_get_sysattr_value(parent_dev, "size")) 143 != NULL) { 144 uint64_t numval = DEV_BSIZE; 145 146 numval *= strtoull(value, NULL, 10); 147 (void) nvlist_add_uint64(nvl, DEV_PARENT_SIZE, numval); 148 } 149 } 150 151 /* 152 * Grab the pool and vdev guids from blkid cache 153 */ 154 value = udev_device_get_property_value(dev, "ID_FS_UUID"); 155 if (value != NULL && (guid = strtoull(value, NULL, 10)) != 0) 156 (void) nvlist_add_uint64(nvl, ZFS_EV_POOL_GUID, guid); 157 158 value = udev_device_get_property_value(dev, "ID_FS_UUID_SUB"); 159 if (value != NULL && (guid = strtoull(value, NULL, 10)) != 0) 160 (void) nvlist_add_uint64(nvl, ZFS_EV_VDEV_GUID, guid); 161 162 /* 163 * Either a vdev guid or a devid must be present for matching 164 */ 165 if (!nvlist_exists(nvl, DEV_IDENTIFIER) && 166 !nvlist_exists(nvl, ZFS_EV_VDEV_GUID)) { 167 nvlist_free(nvl); 168 return (NULL); 169 } 170 171 return (nvl); 172 } 173 174 /* 175 * Listen for block device uevents 176 */ 177 static void * 178 zed_udev_monitor(void *arg) 179 { 180 struct udev_monitor *mon = arg; 181 const char *tmp; 182 char *tmp2; 183 184 zed_log_msg(LOG_INFO, "Waiting for new udev disk events..."); 185 186 while (1) { 187 struct udev_device *dev; 188 const char *action, *type, *part, *sectors; 189 const char *bus, *uuid, *devpath; 190 const char *class, *subclass; 191 nvlist_t *nvl; 192 boolean_t is_zfs = B_FALSE; 193 194 /* allow a cancellation while blocked (recvmsg) */ 195 pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL); 196 197 /* blocks at recvmsg until an event occurs */ 198 if ((dev = udev_monitor_receive_device(mon)) == NULL) { 199 zed_log_msg(LOG_WARNING, "zed_udev_monitor: receive " 200 "device error %d", errno); 201 continue; 202 } 203 204 /* allow all steps to complete before a cancellation */ 205 pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, NULL); 206 207 /* 208 * Strongly typed device is the preferred filter 209 */ 210 type = udev_device_get_property_value(dev, "ID_FS_TYPE"); 211 if (type != NULL && type[0] != '\0') { 212 if (strcmp(type, "zfs_member") == 0) { 213 is_zfs = B_TRUE; 214 } else { 215 /* not ours, so skip */ 216 zed_log_msg(LOG_INFO, "zed_udev_monitor: skip " 217 "%s (in use by %s)", 218 udev_device_get_devnode(dev), type); 219 udev_device_unref(dev); 220 continue; 221 } 222 } 223 224 /* 225 * if this is a disk and it is partitioned, then the 226 * zfs label will reside in a DEVTYPE=partition and 227 * we can skip passing this event 228 * 229 * Special case: Blank disks are sometimes reported with 230 * an erroneous 'atari' partition, and should not be 231 * excluded from being used as an autoreplace disk: 232 * 233 * https://github.com/openzfs/zfs/issues/13497 234 */ 235 type = udev_device_get_property_value(dev, "DEVTYPE"); 236 part = udev_device_get_property_value(dev, 237 "ID_PART_TABLE_TYPE"); 238 if (type != NULL && type[0] != '\0' && 239 strcmp(type, "disk") == 0 && 240 part != NULL && part[0] != '\0') { 241 const char *devname = 242 udev_device_get_property_value(dev, "DEVNAME"); 243 244 if (strcmp(part, "atari") == 0) { 245 zed_log_msg(LOG_INFO, 246 "%s: %s is reporting an atari partition, " 247 "but we're going to assume it's a false " 248 "positive and still use it (issue #13497)", 249 __func__, devname); 250 } else { 251 zed_log_msg(LOG_INFO, 252 "%s: skip %s since it has a %s partition " 253 "already", __func__, devname, part); 254 /* skip and wait for partition event */ 255 udev_device_unref(dev); 256 continue; 257 } 258 } 259 260 /* 261 * ignore small partitions 262 */ 263 sectors = udev_device_get_property_value(dev, 264 "ID_PART_ENTRY_SIZE"); 265 if (sectors == NULL) 266 sectors = udev_device_get_sysattr_value(dev, "size"); 267 if (sectors != NULL && 268 strtoull(sectors, NULL, 10) < MINIMUM_SECTORS) { 269 zed_log_msg(LOG_INFO, 270 "%s: %s sectors %s < %llu (minimum)", 271 __func__, 272 udev_device_get_property_value(dev, "DEVNAME"), 273 sectors, MINIMUM_SECTORS); 274 udev_device_unref(dev); 275 continue; 276 } 277 278 /* 279 * If the blkid probe didn't find ZFS, then a persistent 280 * device id string is required in the message schema 281 * for matching with vdevs. Preflight here for expected 282 * udev information. 283 * 284 * Special case: 285 * NVMe devices don't have ID_BUS set (at least on RHEL 7-8), 286 * but they are valid for autoreplace. Add a special case for 287 * them by searching for "/nvme/" in the udev DEVPATH: 288 * 289 * DEVPATH=/devices/pci0000:00/0000:00:1e.0/nvme/nvme2/nvme2n1 290 */ 291 bus = udev_device_get_property_value(dev, "ID_BUS"); 292 uuid = udev_device_get_property_value(dev, "DM_UUID"); 293 devpath = udev_device_get_devpath(dev); 294 if (!is_zfs && (bus == NULL && uuid == NULL && 295 strstr(devpath, "/nvme/") == NULL)) { 296 zed_log_msg(LOG_INFO, "zed_udev_monitor: %s no devid " 297 "source", udev_device_get_devnode(dev)); 298 udev_device_unref(dev); 299 continue; 300 } 301 302 action = udev_device_get_action(dev); 303 if (strcmp(action, "add") == 0) { 304 class = EC_DEV_ADD; 305 subclass = ESC_DISK; 306 } else if (strcmp(action, "remove") == 0) { 307 class = EC_DEV_REMOVE; 308 subclass = ESC_DISK; 309 } else if (strcmp(action, "change") == 0) { 310 class = EC_DEV_STATUS; 311 subclass = ESC_DEV_DLE; 312 } else { 313 zed_log_msg(LOG_WARNING, "zed_udev_monitor: %s unknown", 314 action); 315 udev_device_unref(dev); 316 continue; 317 } 318 319 /* 320 * Special case an EC_DEV_ADD for multipath devices 321 * 322 * When a multipath device is created, udev reports the 323 * following: 324 * 325 * 1. "add" event of the dm device for the multipath device 326 * (like /dev/dm-3). 327 * 2. "change" event to create the actual multipath device 328 * symlink (like /dev/mapper/mpatha). The event also 329 * passes back the relevant DM vars we care about, like 330 * DM_UUID. 331 * 3. Another "change" event identical to #2 (that we ignore). 332 * 333 * To get the behavior we want, we treat the "change" event 334 * in #2 as a "add" event; as if "/dev/mapper/mpatha" was 335 * a new disk being added. 336 */ 337 if (strcmp(class, EC_DEV_STATUS) == 0 && 338 udev_device_get_property_value(dev, "DM_UUID") && 339 udev_device_get_property_value(dev, "MPATH_SBIN_PATH")) { 340 tmp = udev_device_get_devnode(dev); 341 tmp2 = zfs_get_underlying_path(tmp); 342 if (tmp && tmp2 && (strcmp(tmp, tmp2) != 0)) { 343 /* 344 * We have a real underlying device, which 345 * means that this multipath "change" event is 346 * an "add" event. 347 * 348 * If the multipath device and the underlying 349 * dev are the same name (i.e. /dev/dm-5), then 350 * there is no real underlying disk for this 351 * multipath device, and so this "change" event 352 * really is a multipath removal. 353 */ 354 class = EC_DEV_ADD; 355 subclass = ESC_DISK; 356 } else { 357 tmp = udev_device_get_property_value(dev, 358 "DM_NR_VALID_PATHS"); 359 /* treat as a multipath remove */ 360 if (tmp != NULL && strcmp(tmp, "0") == 0) { 361 class = EC_DEV_REMOVE; 362 subclass = ESC_DISK; 363 } 364 } 365 free(tmp2); 366 } 367 368 /* 369 * Special case an EC_DEV_ADD for scsi_debug devices 370 * 371 * These devices require a udevadm trigger command after 372 * creation in order to register the vdev_id scsidebug alias 373 * rule (adds a persistent path (phys_path) used for fault 374 * management automated tests in the ZFS test suite. 375 * 376 * After udevadm trigger command, event registers as a "change" 377 * event but needs to instead be handled as another "add" event 378 * to allow for disk labeling and partitioning to occur. 379 */ 380 if (strcmp(class, EC_DEV_STATUS) == 0 && 381 udev_device_get_property_value(dev, "ID_VDEV") && 382 udev_device_get_property_value(dev, "ID_MODEL")) { 383 const char *id_model, *id_model_sd = "scsi_debug"; 384 385 id_model = udev_device_get_property_value(dev, 386 "ID_MODEL"); 387 if (strcmp(id_model, id_model_sd) == 0) { 388 class = EC_DEV_ADD; 389 subclass = ESC_DISK; 390 } 391 } 392 393 if ((nvl = dev_event_nvlist(dev)) != NULL) { 394 zed_udev_event(class, subclass, nvl); 395 nvlist_free(nvl); 396 } 397 398 udev_device_unref(dev); 399 } 400 401 return (NULL); 402 } 403 404 int 405 zed_disk_event_init(void) 406 { 407 int fd, fflags; 408 409 if ((g_udev = udev_new()) == NULL) { 410 zed_log_msg(LOG_WARNING, "udev_new failed (%d)", errno); 411 return (-1); 412 } 413 414 /* Set up a udev monitor for block devices */ 415 g_mon = udev_monitor_new_from_netlink(g_udev, "udev"); 416 udev_monitor_filter_add_match_subsystem_devtype(g_mon, "block", "disk"); 417 udev_monitor_filter_add_match_subsystem_devtype(g_mon, "block", 418 "partition"); 419 udev_monitor_enable_receiving(g_mon); 420 421 /* Make sure monitoring socket is blocking */ 422 fd = udev_monitor_get_fd(g_mon); 423 if ((fflags = fcntl(fd, F_GETFL)) & O_NONBLOCK) 424 (void) fcntl(fd, F_SETFL, fflags & ~O_NONBLOCK); 425 426 /* spawn a thread to monitor events */ 427 if (pthread_create(&g_mon_tid, NULL, zed_udev_monitor, g_mon) != 0) { 428 udev_monitor_unref(g_mon); 429 udev_unref(g_udev); 430 zed_log_msg(LOG_WARNING, "pthread_create failed"); 431 return (-1); 432 } 433 434 pthread_setname_np(g_mon_tid, "udev monitor"); 435 zed_log_msg(LOG_INFO, "zed_disk_event_init"); 436 437 return (0); 438 } 439 440 void 441 zed_disk_event_fini(void) 442 { 443 /* cancel monitor thread at recvmsg() */ 444 (void) pthread_cancel(g_mon_tid); 445 (void) pthread_join(g_mon_tid, NULL); 446 447 /* cleanup udev resources */ 448 udev_monitor_unref(g_mon); 449 udev_unref(g_udev); 450 451 zed_log_msg(LOG_INFO, "zed_disk_event_fini"); 452 } 453 454 #else 455 456 #include "zed_disk_event.h" 457 458 int 459 zed_disk_event_init(void) 460 { 461 return (0); 462 } 463 464 void 465 zed_disk_event_fini(void) 466 { 467 } 468 469 #endif /* HAVE_LIBUDEV */ 470