xref: /freebsd/sys/contrib/openzfs/cmd/raidz_test/raidz_test.c (revision f374ba41f55c1a127303d92d830dd58eef2f5243)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or https://opensource.org/licenses/CDDL-1.0.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright (C) 2016 Gvozden Nešković. All rights reserved.
24  */
25 
26 #include <sys/zfs_context.h>
27 #include <sys/time.h>
28 #include <sys/wait.h>
29 #include <sys/zio.h>
30 #include <umem.h>
31 #include <sys/vdev_raidz.h>
32 #include <sys/vdev_raidz_impl.h>
33 #include <assert.h>
34 #include <stdio.h>
35 #include "raidz_test.h"
36 
37 static int *rand_data;
38 raidz_test_opts_t rto_opts;
39 
40 static char pid_s[16];
41 
42 static void sig_handler(int signo)
43 {
44 	int old_errno = errno;
45 	struct sigaction action;
46 	/*
47 	 * Restore default action and re-raise signal so SIGSEGV and
48 	 * SIGABRT can trigger a core dump.
49 	 */
50 	action.sa_handler = SIG_DFL;
51 	sigemptyset(&action.sa_mask);
52 	action.sa_flags = 0;
53 	(void) sigaction(signo, &action, NULL);
54 
55 	if (rto_opts.rto_gdb) {
56 		pid_t pid = fork();
57 		if (pid == 0) {
58 			execlp("gdb", "gdb", "-ex", "set pagination 0",
59 			    "-p", pid_s, NULL);
60 			_exit(-1);
61 		} else if (pid > 0)
62 			while (waitpid(pid, NULL, 0) == -1 && errno == EINTR)
63 				;
64 	}
65 
66 	raise(signo);
67 	errno = old_errno;
68 }
69 
70 static void print_opts(raidz_test_opts_t *opts, boolean_t force)
71 {
72 	const char *verbose;
73 	switch (opts->rto_v) {
74 		case D_ALL:
75 			verbose = "no";
76 			break;
77 		case D_INFO:
78 			verbose = "info";
79 			break;
80 		case D_DEBUG:
81 		default:
82 			verbose = "debug";
83 			break;
84 	}
85 
86 	if (force || opts->rto_v >= D_INFO) {
87 		(void) fprintf(stdout, DBLSEP "Running with options:\n"
88 		    "  (-a) zio ashift                   : %zu\n"
89 		    "  (-o) zio offset                   : 1 << %zu\n"
90 		    "  (-e) expanded map                 : %s\n"
91 		    "  (-r) reflow offset                : %llx\n"
92 		    "  (-d) number of raidz data columns : %zu\n"
93 		    "  (-s) size of DATA                 : 1 << %zu\n"
94 		    "  (-S) sweep parameters             : %s \n"
95 		    "  (-v) verbose                      : %s \n\n",
96 		    opts->rto_ashift,				/* -a */
97 		    ilog2(opts->rto_offset),			/* -o */
98 		    opts->rto_expand ? "yes" : "no",		/* -e */
99 		    (u_longlong_t)opts->rto_expand_offset,	/* -r */
100 		    opts->rto_dcols,				/* -d */
101 		    ilog2(opts->rto_dsize),			/* -s */
102 		    opts->rto_sweep ? "yes" : "no",		/* -S */
103 		    verbose);					/* -v */
104 	}
105 }
106 
107 static void usage(boolean_t requested)
108 {
109 	const raidz_test_opts_t *o = &rto_opts_defaults;
110 
111 	FILE *fp = requested ? stdout : stderr;
112 
113 	(void) fprintf(fp, "Usage:\n"
114 	    "\t[-a zio ashift (default: %zu)]\n"
115 	    "\t[-o zio offset, exponent radix 2 (default: %zu)]\n"
116 	    "\t[-d number of raidz data columns (default: %zu)]\n"
117 	    "\t[-s zio size, exponent radix 2 (default: %zu)]\n"
118 	    "\t[-S parameter sweep (default: %s)]\n"
119 	    "\t[-t timeout for parameter sweep test]\n"
120 	    "\t[-B benchmark all raidz implementations]\n"
121 	    "\t[-e use expanded raidz map (default: %s)]\n"
122 	    "\t[-r expanded raidz map reflow offset (default: %llx)]\n"
123 	    "\t[-v increase verbosity (default: %d)]\n"
124 	    "\t[-h (print help)]\n"
125 	    "\t[-T test the test, see if failure would be detected]\n"
126 	    "\t[-D debug (attach gdb on SIGSEGV)]\n"
127 	    "",
128 	    o->rto_ashift,				/* -a */
129 	    ilog2(o->rto_offset),			/* -o */
130 	    o->rto_dcols,				/* -d */
131 	    ilog2(o->rto_dsize),			/* -s */
132 	    rto_opts.rto_sweep ? "yes" : "no",		/* -S */
133 	    rto_opts.rto_expand ? "yes" : "no",		/* -e */
134 	    (u_longlong_t)o->rto_expand_offset,		/* -r */
135 	    o->rto_v);					/* -v */
136 
137 	exit(requested ? 0 : 1);
138 }
139 
140 static void process_options(int argc, char **argv)
141 {
142 	size_t value;
143 	int opt;
144 	raidz_test_opts_t *o = &rto_opts;
145 
146 	memcpy(o, &rto_opts_defaults, sizeof (*o));
147 
148 	while ((opt = getopt(argc, argv, "TDBSvha:er:o:d:s:t:")) != -1) {
149 		switch (opt) {
150 		case 'a':
151 			value = strtoull(optarg, NULL, 0);
152 			o->rto_ashift = MIN(13, MAX(9, value));
153 			break;
154 		case 'e':
155 			o->rto_expand = 1;
156 			break;
157 		case 'r':
158 			o->rto_expand_offset = strtoull(optarg, NULL, 0);
159 			break;
160 		case 'o':
161 			value = strtoull(optarg, NULL, 0);
162 			o->rto_offset = ((1ULL << MIN(12, value)) >> 9) << 9;
163 			break;
164 		case 'd':
165 			value = strtoull(optarg, NULL, 0);
166 			o->rto_dcols = MIN(255, MAX(1, value));
167 			break;
168 		case 's':
169 			value = strtoull(optarg, NULL, 0);
170 			o->rto_dsize = 1ULL <<  MIN(SPA_MAXBLOCKSHIFT,
171 			    MAX(SPA_MINBLOCKSHIFT, value));
172 			break;
173 		case 't':
174 			value = strtoull(optarg, NULL, 0);
175 			o->rto_sweep_timeout = value;
176 			break;
177 		case 'v':
178 			o->rto_v++;
179 			break;
180 		case 'S':
181 			o->rto_sweep = 1;
182 			break;
183 		case 'B':
184 			o->rto_benchmark = 1;
185 			break;
186 		case 'D':
187 			o->rto_gdb = 1;
188 			break;
189 		case 'T':
190 			o->rto_sanity = 1;
191 			break;
192 		case 'h':
193 			usage(B_TRUE);
194 			break;
195 		case '?':
196 		default:
197 			usage(B_FALSE);
198 			break;
199 		}
200 	}
201 }
202 
203 #define	DATA_COL(rr, i) ((rr)->rr_col[rr->rr_firstdatacol + (i)].rc_abd)
204 #define	DATA_COL_SIZE(rr, i) ((rr)->rr_col[rr->rr_firstdatacol + (i)].rc_size)
205 
206 #define	CODE_COL(rr, i) ((rr)->rr_col[(i)].rc_abd)
207 #define	CODE_COL_SIZE(rr, i) ((rr)->rr_col[(i)].rc_size)
208 
209 static int
210 cmp_code(raidz_test_opts_t *opts, const raidz_map_t *rm, const int parity)
211 {
212 	int r, i, ret = 0;
213 
214 	VERIFY(parity >= 1 && parity <= 3);
215 
216 	for (r = 0; r < rm->rm_nrows; r++) {
217 		raidz_row_t * const rr = rm->rm_row[r];
218 		raidz_row_t * const rrg = opts->rm_golden->rm_row[r];
219 		for (i = 0; i < parity; i++) {
220 			if (CODE_COL_SIZE(rrg, i) == 0) {
221 				VERIFY0(CODE_COL_SIZE(rr, i));
222 				continue;
223 			}
224 
225 			if (abd_cmp(CODE_COL(rr, i),
226 			    CODE_COL(rrg, i)) != 0) {
227 				ret++;
228 				LOG_OPT(D_DEBUG, opts,
229 				    "\nParity block [%d] different!\n", i);
230 			}
231 		}
232 	}
233 	return (ret);
234 }
235 
236 static int
237 cmp_data(raidz_test_opts_t *opts, raidz_map_t *rm)
238 {
239 	int r, i, dcols, ret = 0;
240 
241 	for (r = 0; r < rm->rm_nrows; r++) {
242 		raidz_row_t *rr = rm->rm_row[r];
243 		raidz_row_t *rrg = opts->rm_golden->rm_row[r];
244 		dcols = opts->rm_golden->rm_row[0]->rr_cols -
245 		    raidz_parity(opts->rm_golden);
246 		for (i = 0; i < dcols; i++) {
247 			if (DATA_COL_SIZE(rrg, i) == 0) {
248 				VERIFY0(DATA_COL_SIZE(rr, i));
249 				continue;
250 			}
251 
252 			if (abd_cmp(DATA_COL(rrg, i),
253 			    DATA_COL(rr, i)) != 0) {
254 				ret++;
255 
256 				LOG_OPT(D_DEBUG, opts,
257 				    "\nData block [%d] different!\n", i);
258 			}
259 		}
260 	}
261 	return (ret);
262 }
263 
264 static int
265 init_rand(void *data, size_t size, void *private)
266 {
267 	(void) private;
268 	memcpy(data, rand_data, size);
269 	return (0);
270 }
271 
272 static void
273 corrupt_colums(raidz_map_t *rm, const int *tgts, const int cnt)
274 {
275 	for (int r = 0; r < rm->rm_nrows; r++) {
276 		raidz_row_t *rr = rm->rm_row[r];
277 		for (int i = 0; i < cnt; i++) {
278 			raidz_col_t *col = &rr->rr_col[tgts[i]];
279 			abd_iterate_func(col->rc_abd, 0, col->rc_size,
280 			    init_rand, NULL);
281 		}
282 	}
283 }
284 
285 void
286 init_zio_abd(zio_t *zio)
287 {
288 	abd_iterate_func(zio->io_abd, 0, zio->io_size, init_rand, NULL);
289 }
290 
291 static void
292 fini_raidz_map(zio_t **zio, raidz_map_t **rm)
293 {
294 	vdev_raidz_map_free(*rm);
295 	raidz_free((*zio)->io_abd, (*zio)->io_size);
296 	umem_free(*zio, sizeof (zio_t));
297 
298 	*zio = NULL;
299 	*rm = NULL;
300 }
301 
302 static int
303 init_raidz_golden_map(raidz_test_opts_t *opts, const int parity)
304 {
305 	int err = 0;
306 	zio_t *zio_test;
307 	raidz_map_t *rm_test;
308 	const size_t total_ncols = opts->rto_dcols + parity;
309 
310 	if (opts->rm_golden) {
311 		fini_raidz_map(&opts->zio_golden, &opts->rm_golden);
312 	}
313 
314 	opts->zio_golden = umem_zalloc(sizeof (zio_t), UMEM_NOFAIL);
315 	zio_test = umem_zalloc(sizeof (zio_t), UMEM_NOFAIL);
316 
317 	opts->zio_golden->io_offset = zio_test->io_offset = opts->rto_offset;
318 	opts->zio_golden->io_size = zio_test->io_size = opts->rto_dsize;
319 
320 	opts->zio_golden->io_abd = raidz_alloc(opts->rto_dsize);
321 	zio_test->io_abd = raidz_alloc(opts->rto_dsize);
322 
323 	init_zio_abd(opts->zio_golden);
324 	init_zio_abd(zio_test);
325 
326 	VERIFY0(vdev_raidz_impl_set("original"));
327 
328 	if (opts->rto_expand) {
329 		opts->rm_golden =
330 		    vdev_raidz_map_alloc_expanded(opts->zio_golden->io_abd,
331 		    opts->zio_golden->io_size, opts->zio_golden->io_offset,
332 		    opts->rto_ashift, total_ncols+1, total_ncols,
333 		    parity, opts->rto_expand_offset);
334 		rm_test = vdev_raidz_map_alloc_expanded(zio_test->io_abd,
335 		    zio_test->io_size, zio_test->io_offset,
336 		    opts->rto_ashift, total_ncols+1, total_ncols,
337 		    parity, opts->rto_expand_offset);
338 	} else {
339 		opts->rm_golden = vdev_raidz_map_alloc(opts->zio_golden,
340 		    opts->rto_ashift, total_ncols, parity);
341 		rm_test = vdev_raidz_map_alloc(zio_test,
342 		    opts->rto_ashift, total_ncols, parity);
343 	}
344 
345 	VERIFY(opts->zio_golden);
346 	VERIFY(opts->rm_golden);
347 
348 	vdev_raidz_generate_parity(opts->rm_golden);
349 	vdev_raidz_generate_parity(rm_test);
350 
351 	/* sanity check */
352 	err |= cmp_data(opts, rm_test);
353 	err |= cmp_code(opts, rm_test, parity);
354 
355 	if (err)
356 		ERR("initializing the golden copy ... [FAIL]!\n");
357 
358 	/* tear down raidz_map of test zio */
359 	fini_raidz_map(&zio_test, &rm_test);
360 
361 	return (err);
362 }
363 
364 /*
365  * If reflow is not in progress, reflow_offset should be UINT64_MAX.
366  * For each row, if the row is entirely before reflow_offset, it will
367  * come from the new location.  Otherwise this row will come from the
368  * old location.  Therefore, rows that straddle the reflow_offset will
369  * come from the old location.
370  *
371  * NOTE: Until raidz expansion is implemented this function is only
372  * needed by raidz_test.c to the multi-row raid_map_t functionality.
373  */
374 raidz_map_t *
375 vdev_raidz_map_alloc_expanded(abd_t *abd, uint64_t size, uint64_t offset,
376     uint64_t ashift, uint64_t physical_cols, uint64_t logical_cols,
377     uint64_t nparity, uint64_t reflow_offset)
378 {
379 	/* The zio's size in units of the vdev's minimum sector size. */
380 	uint64_t s = size >> ashift;
381 	uint64_t q, r, bc, devidx, asize = 0, tot;
382 
383 	/*
384 	 * "Quotient": The number of data sectors for this stripe on all but
385 	 * the "big column" child vdevs that also contain "remainder" data.
386 	 * AKA "full rows"
387 	 */
388 	q = s / (logical_cols - nparity);
389 
390 	/*
391 	 * "Remainder": The number of partial stripe data sectors in this I/O.
392 	 * This will add a sector to some, but not all, child vdevs.
393 	 */
394 	r = s - q * (logical_cols - nparity);
395 
396 	/* The number of "big columns" - those which contain remainder data. */
397 	bc = (r == 0 ? 0 : r + nparity);
398 
399 	/*
400 	 * The total number of data and parity sectors associated with
401 	 * this I/O.
402 	 */
403 	tot = s + nparity * (q + (r == 0 ? 0 : 1));
404 
405 	/* How many rows contain data (not skip) */
406 	uint64_t rows = howmany(tot, logical_cols);
407 	int cols = MIN(tot, logical_cols);
408 
409 	raidz_map_t *rm = kmem_zalloc(offsetof(raidz_map_t, rm_row[rows]),
410 	    KM_SLEEP);
411 	rm->rm_nrows = rows;
412 
413 	for (uint64_t row = 0; row < rows; row++) {
414 		raidz_row_t *rr = kmem_alloc(offsetof(raidz_row_t,
415 		    rr_col[cols]), KM_SLEEP);
416 		rm->rm_row[row] = rr;
417 
418 		/* The starting RAIDZ (parent) vdev sector of the row. */
419 		uint64_t b = (offset >> ashift) + row * logical_cols;
420 
421 		/*
422 		 * If we are in the middle of a reflow, and any part of this
423 		 * row has not been copied, then use the old location of
424 		 * this row.
425 		 */
426 		int row_phys_cols = physical_cols;
427 		if (b + (logical_cols - nparity) > reflow_offset >> ashift)
428 			row_phys_cols--;
429 
430 		/* starting child of this row */
431 		uint64_t child_id = b % row_phys_cols;
432 		/* The starting byte offset on each child vdev. */
433 		uint64_t child_offset = (b / row_phys_cols) << ashift;
434 
435 		/*
436 		 * We set cols to the entire width of the block, even
437 		 * if this row is shorter.  This is needed because parity
438 		 * generation (for Q and R) needs to know the entire width,
439 		 * because it treats the short row as though it was
440 		 * full-width (and the "phantom" sectors were zero-filled).
441 		 *
442 		 * Another approach to this would be to set cols shorter
443 		 * (to just the number of columns that we might do i/o to)
444 		 * and have another mechanism to tell the parity generation
445 		 * about the "entire width".  Reconstruction (at least
446 		 * vdev_raidz_reconstruct_general()) would also need to
447 		 * know about the "entire width".
448 		 */
449 		rr->rr_cols = cols;
450 		rr->rr_bigcols = bc;
451 		rr->rr_missingdata = 0;
452 		rr->rr_missingparity = 0;
453 		rr->rr_firstdatacol = nparity;
454 		rr->rr_abd_empty = NULL;
455 		rr->rr_nempty = 0;
456 
457 		for (int c = 0; c < rr->rr_cols; c++, child_id++) {
458 			if (child_id >= row_phys_cols) {
459 				child_id -= row_phys_cols;
460 				child_offset += 1ULL << ashift;
461 			}
462 			rr->rr_col[c].rc_devidx = child_id;
463 			rr->rr_col[c].rc_offset = child_offset;
464 			rr->rr_col[c].rc_orig_data = NULL;
465 			rr->rr_col[c].rc_error = 0;
466 			rr->rr_col[c].rc_tried = 0;
467 			rr->rr_col[c].rc_skipped = 0;
468 			rr->rr_col[c].rc_need_orig_restore = B_FALSE;
469 
470 			uint64_t dc = c - rr->rr_firstdatacol;
471 			if (c < rr->rr_firstdatacol) {
472 				rr->rr_col[c].rc_size = 1ULL << ashift;
473 				rr->rr_col[c].rc_abd =
474 				    abd_alloc_linear(rr->rr_col[c].rc_size,
475 				    B_TRUE);
476 			} else if (row == rows - 1 && bc != 0 && c >= bc) {
477 				/*
478 				 * Past the end, this for parity generation.
479 				 */
480 				rr->rr_col[c].rc_size = 0;
481 				rr->rr_col[c].rc_abd = NULL;
482 			} else {
483 				/*
484 				 * "data column" (col excluding parity)
485 				 * Add an ASCII art diagram here
486 				 */
487 				uint64_t off;
488 
489 				if (c < bc || r == 0) {
490 					off = dc * rows + row;
491 				} else {
492 					off = r * rows +
493 					    (dc - r) * (rows - 1) + row;
494 				}
495 				rr->rr_col[c].rc_size = 1ULL << ashift;
496 				rr->rr_col[c].rc_abd = abd_get_offset_struct(
497 				    &rr->rr_col[c].rc_abdstruct,
498 				    abd, off << ashift, 1 << ashift);
499 			}
500 
501 			asize += rr->rr_col[c].rc_size;
502 		}
503 		/*
504 		 * If all data stored spans all columns, there's a danger that
505 		 * parity will always be on the same device and, since parity
506 		 * isn't read during normal operation, that that device's I/O
507 		 * bandwidth won't be used effectively. We therefore switch
508 		 * the parity every 1MB.
509 		 *
510 		 * ...at least that was, ostensibly, the theory. As a practical
511 		 * matter unless we juggle the parity between all devices
512 		 * evenly, we won't see any benefit. Further, occasional writes
513 		 * that aren't a multiple of the LCM of the number of children
514 		 * and the minimum stripe width are sufficient to avoid pessimal
515 		 * behavior. Unfortunately, this decision created an implicit
516 		 * on-disk format requirement that we need to support for all
517 		 * eternity, but only for single-parity RAID-Z.
518 		 *
519 		 * If we intend to skip a sector in the zeroth column for
520 		 * padding we must make sure to note this swap. We will never
521 		 * intend to skip the first column since at least one data and
522 		 * one parity column must appear in each row.
523 		 */
524 		if (rr->rr_firstdatacol == 1 && rr->rr_cols > 1 &&
525 		    (offset & (1ULL << 20))) {
526 			ASSERT(rr->rr_cols >= 2);
527 			ASSERT(rr->rr_col[0].rc_size == rr->rr_col[1].rc_size);
528 			devidx = rr->rr_col[0].rc_devidx;
529 			uint64_t o = rr->rr_col[0].rc_offset;
530 			rr->rr_col[0].rc_devidx = rr->rr_col[1].rc_devidx;
531 			rr->rr_col[0].rc_offset = rr->rr_col[1].rc_offset;
532 			rr->rr_col[1].rc_devidx = devidx;
533 			rr->rr_col[1].rc_offset = o;
534 		}
535 
536 	}
537 	ASSERT3U(asize, ==, tot << ashift);
538 
539 	/* init RAIDZ parity ops */
540 	rm->rm_ops = vdev_raidz_math_get_ops();
541 
542 	return (rm);
543 }
544 
545 static raidz_map_t *
546 init_raidz_map(raidz_test_opts_t *opts, zio_t **zio, const int parity)
547 {
548 	raidz_map_t *rm = NULL;
549 	const size_t alloc_dsize = opts->rto_dsize;
550 	const size_t total_ncols = opts->rto_dcols + parity;
551 	const int ccols[] = { 0, 1, 2 };
552 
553 	VERIFY(zio);
554 	VERIFY(parity <= 3 && parity >= 1);
555 
556 	*zio = umem_zalloc(sizeof (zio_t), UMEM_NOFAIL);
557 
558 	(*zio)->io_offset = 0;
559 	(*zio)->io_size = alloc_dsize;
560 	(*zio)->io_abd = raidz_alloc(alloc_dsize);
561 	init_zio_abd(*zio);
562 
563 	if (opts->rto_expand) {
564 		rm = vdev_raidz_map_alloc_expanded((*zio)->io_abd,
565 		    (*zio)->io_size, (*zio)->io_offset,
566 		    opts->rto_ashift, total_ncols+1, total_ncols,
567 		    parity, opts->rto_expand_offset);
568 	} else {
569 		rm = vdev_raidz_map_alloc(*zio, opts->rto_ashift,
570 		    total_ncols, parity);
571 	}
572 	VERIFY(rm);
573 
574 	/* Make sure code columns are destroyed */
575 	corrupt_colums(rm, ccols, parity);
576 
577 	return (rm);
578 }
579 
580 static int
581 run_gen_check(raidz_test_opts_t *opts)
582 {
583 	char **impl_name;
584 	int fn, err = 0;
585 	zio_t *zio_test;
586 	raidz_map_t *rm_test;
587 
588 	err = init_raidz_golden_map(opts, PARITY_PQR);
589 	if (0 != err)
590 		return (err);
591 
592 	LOG(D_INFO, DBLSEP);
593 	LOG(D_INFO, "Testing parity generation...\n");
594 
595 	for (impl_name = (char **)raidz_impl_names+1; *impl_name != NULL;
596 	    impl_name++) {
597 
598 		LOG(D_INFO, SEP);
599 		LOG(D_INFO, "\tTesting [%s] implementation...", *impl_name);
600 
601 		if (0 != vdev_raidz_impl_set(*impl_name)) {
602 			LOG(D_INFO, "[SKIP]\n");
603 			continue;
604 		} else {
605 			LOG(D_INFO, "[SUPPORTED]\n");
606 		}
607 
608 		for (fn = 0; fn < RAIDZ_GEN_NUM; fn++) {
609 
610 			/* Check if should stop */
611 			if (rto_opts.rto_should_stop)
612 				return (err);
613 
614 			/* create suitable raidz_map */
615 			rm_test = init_raidz_map(opts, &zio_test, fn+1);
616 			VERIFY(rm_test);
617 
618 			LOG(D_INFO, "\t\tTesting method [%s] ...",
619 			    raidz_gen_name[fn]);
620 
621 			if (!opts->rto_sanity)
622 				vdev_raidz_generate_parity(rm_test);
623 
624 			if (cmp_code(opts, rm_test, fn+1) != 0) {
625 				LOG(D_INFO, "[FAIL]\n");
626 				err++;
627 			} else
628 				LOG(D_INFO, "[PASS]\n");
629 
630 			fini_raidz_map(&zio_test, &rm_test);
631 		}
632 	}
633 
634 	fini_raidz_map(&opts->zio_golden, &opts->rm_golden);
635 
636 	return (err);
637 }
638 
639 static int
640 run_rec_check_impl(raidz_test_opts_t *opts, raidz_map_t *rm, const int fn)
641 {
642 	int x0, x1, x2;
643 	int tgtidx[3];
644 	int err = 0;
645 	static const int rec_tgts[7][3] = {
646 		{1, 2, 3},	/* rec_p:   bad QR & D[0]	*/
647 		{0, 2, 3},	/* rec_q:   bad PR & D[0]	*/
648 		{0, 1, 3},	/* rec_r:   bad PQ & D[0]	*/
649 		{2, 3, 4},	/* rec_pq:  bad R  & D[0][1]	*/
650 		{1, 3, 4},	/* rec_pr:  bad Q  & D[0][1]	*/
651 		{0, 3, 4},	/* rec_qr:  bad P  & D[0][1]	*/
652 		{3, 4, 5}	/* rec_pqr: bad    & D[0][1][2] */
653 	};
654 
655 	memcpy(tgtidx, rec_tgts[fn], sizeof (tgtidx));
656 
657 	if (fn < RAIDZ_REC_PQ) {
658 		/* can reconstruct 1 failed data disk */
659 		for (x0 = 0; x0 < opts->rto_dcols; x0++) {
660 			if (x0 >= rm->rm_row[0]->rr_cols - raidz_parity(rm))
661 				continue;
662 
663 			/* Check if should stop */
664 			if (rto_opts.rto_should_stop)
665 				return (err);
666 
667 			LOG(D_DEBUG, "[%d] ", x0);
668 
669 			tgtidx[2] = x0 + raidz_parity(rm);
670 
671 			corrupt_colums(rm, tgtidx+2, 1);
672 
673 			if (!opts->rto_sanity)
674 				vdev_raidz_reconstruct(rm, tgtidx, 3);
675 
676 			if (cmp_data(opts, rm) != 0) {
677 				err++;
678 				LOG(D_DEBUG, "\nREC D[%d]... [FAIL]\n", x0);
679 			}
680 		}
681 
682 	} else if (fn < RAIDZ_REC_PQR) {
683 		/* can reconstruct 2 failed data disk */
684 		for (x0 = 0; x0 < opts->rto_dcols; x0++) {
685 			if (x0 >= rm->rm_row[0]->rr_cols - raidz_parity(rm))
686 				continue;
687 			for (x1 = x0 + 1; x1 < opts->rto_dcols; x1++) {
688 				if (x1 >= rm->rm_row[0]->rr_cols -
689 				    raidz_parity(rm))
690 					continue;
691 
692 				/* Check if should stop */
693 				if (rto_opts.rto_should_stop)
694 					return (err);
695 
696 				LOG(D_DEBUG, "[%d %d] ", x0, x1);
697 
698 				tgtidx[1] = x0 + raidz_parity(rm);
699 				tgtidx[2] = x1 + raidz_parity(rm);
700 
701 				corrupt_colums(rm, tgtidx+1, 2);
702 
703 				if (!opts->rto_sanity)
704 					vdev_raidz_reconstruct(rm, tgtidx, 3);
705 
706 				if (cmp_data(opts, rm) != 0) {
707 					err++;
708 					LOG(D_DEBUG, "\nREC D[%d %d]... "
709 					    "[FAIL]\n", x0, x1);
710 				}
711 			}
712 		}
713 	} else {
714 		/* can reconstruct 3 failed data disk */
715 		for (x0 = 0; x0 < opts->rto_dcols; x0++) {
716 			if (x0 >= rm->rm_row[0]->rr_cols - raidz_parity(rm))
717 				continue;
718 			for (x1 = x0 + 1; x1 < opts->rto_dcols; x1++) {
719 				if (x1 >= rm->rm_row[0]->rr_cols -
720 				    raidz_parity(rm))
721 					continue;
722 				for (x2 = x1 + 1; x2 < opts->rto_dcols; x2++) {
723 					if (x2 >= rm->rm_row[0]->rr_cols -
724 					    raidz_parity(rm))
725 						continue;
726 
727 					/* Check if should stop */
728 					if (rto_opts.rto_should_stop)
729 						return (err);
730 
731 					LOG(D_DEBUG, "[%d %d %d]", x0, x1, x2);
732 
733 					tgtidx[0] = x0 + raidz_parity(rm);
734 					tgtidx[1] = x1 + raidz_parity(rm);
735 					tgtidx[2] = x2 + raidz_parity(rm);
736 
737 					corrupt_colums(rm, tgtidx, 3);
738 
739 					if (!opts->rto_sanity)
740 						vdev_raidz_reconstruct(rm,
741 						    tgtidx, 3);
742 
743 					if (cmp_data(opts, rm) != 0) {
744 						err++;
745 						LOG(D_DEBUG,
746 						    "\nREC D[%d %d %d]... "
747 						    "[FAIL]\n", x0, x1, x2);
748 					}
749 				}
750 			}
751 		}
752 	}
753 	return (err);
754 }
755 
756 static int
757 run_rec_check(raidz_test_opts_t *opts)
758 {
759 	char **impl_name;
760 	unsigned fn, err = 0;
761 	zio_t *zio_test;
762 	raidz_map_t *rm_test;
763 
764 	err = init_raidz_golden_map(opts, PARITY_PQR);
765 	if (0 != err)
766 		return (err);
767 
768 	LOG(D_INFO, DBLSEP);
769 	LOG(D_INFO, "Testing data reconstruction...\n");
770 
771 	for (impl_name = (char **)raidz_impl_names+1; *impl_name != NULL;
772 	    impl_name++) {
773 
774 		LOG(D_INFO, SEP);
775 		LOG(D_INFO, "\tTesting [%s] implementation...", *impl_name);
776 
777 		if (vdev_raidz_impl_set(*impl_name) != 0) {
778 			LOG(D_INFO, "[SKIP]\n");
779 			continue;
780 		} else
781 			LOG(D_INFO, "[SUPPORTED]\n");
782 
783 
784 		/* create suitable raidz_map */
785 		rm_test = init_raidz_map(opts, &zio_test, PARITY_PQR);
786 		/* generate parity */
787 		vdev_raidz_generate_parity(rm_test);
788 
789 		for (fn = 0; fn < RAIDZ_REC_NUM; fn++) {
790 
791 			LOG(D_INFO, "\t\tTesting method [%s] ...",
792 			    raidz_rec_name[fn]);
793 
794 			if (run_rec_check_impl(opts, rm_test, fn) != 0) {
795 				LOG(D_INFO, "[FAIL]\n");
796 				err++;
797 
798 			} else
799 				LOG(D_INFO, "[PASS]\n");
800 
801 		}
802 		/* tear down test raidz_map */
803 		fini_raidz_map(&zio_test, &rm_test);
804 	}
805 
806 	fini_raidz_map(&opts->zio_golden, &opts->rm_golden);
807 
808 	return (err);
809 }
810 
811 static int
812 run_test(raidz_test_opts_t *opts)
813 {
814 	int err = 0;
815 
816 	if (opts == NULL)
817 		opts = &rto_opts;
818 
819 	print_opts(opts, B_FALSE);
820 
821 	err |= run_gen_check(opts);
822 	err |= run_rec_check(opts);
823 
824 	return (err);
825 }
826 
827 #define	SWEEP_RUNNING	0
828 #define	SWEEP_FINISHED	1
829 #define	SWEEP_ERROR	2
830 #define	SWEEP_TIMEOUT	3
831 
832 static int sweep_state = 0;
833 static raidz_test_opts_t failed_opts;
834 
835 static kmutex_t sem_mtx;
836 static kcondvar_t sem_cv;
837 static int max_free_slots;
838 static int free_slots;
839 
840 static __attribute__((noreturn)) void
841 sweep_thread(void *arg)
842 {
843 	int err = 0;
844 	raidz_test_opts_t *opts = (raidz_test_opts_t *)arg;
845 	VERIFY(opts != NULL);
846 
847 	err = run_test(opts);
848 
849 	if (rto_opts.rto_sanity) {
850 		/* 25% chance that a sweep test fails */
851 		if (rand() < (RAND_MAX/4))
852 			err = 1;
853 	}
854 
855 	if (0 != err) {
856 		mutex_enter(&sem_mtx);
857 		memcpy(&failed_opts, opts, sizeof (raidz_test_opts_t));
858 		sweep_state = SWEEP_ERROR;
859 		mutex_exit(&sem_mtx);
860 	}
861 
862 	umem_free(opts, sizeof (raidz_test_opts_t));
863 
864 	/* signal the next thread */
865 	mutex_enter(&sem_mtx);
866 	free_slots++;
867 	cv_signal(&sem_cv);
868 	mutex_exit(&sem_mtx);
869 
870 	thread_exit();
871 }
872 
873 static int
874 run_sweep(void)
875 {
876 	static const size_t dcols_v[] = { 1, 2, 3, 4, 5, 6, 7, 8, 12, 15, 16 };
877 	static const size_t ashift_v[] = { 9, 12, 14 };
878 	static const size_t size_v[] = { 1 << 9, 21 * (1 << 9), 13 * (1 << 12),
879 		1 << 17, (1 << 20) - (1 << 12), SPA_MAXBLOCKSIZE };
880 
881 	(void) setvbuf(stdout, NULL, _IONBF, 0);
882 
883 	ulong_t total_comb = ARRAY_SIZE(size_v) * ARRAY_SIZE(ashift_v) *
884 	    ARRAY_SIZE(dcols_v);
885 	ulong_t tried_comb = 0;
886 	hrtime_t time_diff, start_time = gethrtime();
887 	raidz_test_opts_t *opts;
888 	int a, d, s;
889 
890 	max_free_slots = free_slots = MAX(2, boot_ncpus);
891 
892 	mutex_init(&sem_mtx, NULL, MUTEX_DEFAULT, NULL);
893 	cv_init(&sem_cv, NULL, CV_DEFAULT, NULL);
894 
895 	for (s = 0; s < ARRAY_SIZE(size_v); s++)
896 	for (a = 0; a < ARRAY_SIZE(ashift_v); a++)
897 	for (d = 0; d < ARRAY_SIZE(dcols_v); d++) {
898 
899 		if (size_v[s] < (1 << ashift_v[a])) {
900 			total_comb--;
901 			continue;
902 		}
903 
904 		if (++tried_comb % 20 == 0)
905 			LOG(D_ALL, "%lu/%lu... ", tried_comb, total_comb);
906 
907 		/* wait for signal to start new thread */
908 		mutex_enter(&sem_mtx);
909 		while (cv_timedwait_sig(&sem_cv, &sem_mtx,
910 		    ddi_get_lbolt() + hz)) {
911 
912 			/* check if should stop the test (timeout) */
913 			time_diff = (gethrtime() - start_time) / NANOSEC;
914 			if (rto_opts.rto_sweep_timeout > 0 &&
915 			    time_diff >= rto_opts.rto_sweep_timeout) {
916 				sweep_state = SWEEP_TIMEOUT;
917 				rto_opts.rto_should_stop = B_TRUE;
918 				mutex_exit(&sem_mtx);
919 				goto exit;
920 			}
921 
922 			/* check if should stop the test (error) */
923 			if (sweep_state != SWEEP_RUNNING) {
924 				mutex_exit(&sem_mtx);
925 				goto exit;
926 			}
927 
928 			/* exit loop if a slot is available */
929 			if (free_slots > 0) {
930 				break;
931 			}
932 		}
933 
934 		free_slots--;
935 		mutex_exit(&sem_mtx);
936 
937 		opts = umem_zalloc(sizeof (raidz_test_opts_t), UMEM_NOFAIL);
938 		opts->rto_ashift = ashift_v[a];
939 		opts->rto_dcols = dcols_v[d];
940 		opts->rto_offset = (1ULL << ashift_v[a]) * rand();
941 		opts->rto_dsize = size_v[s];
942 		opts->rto_expand = rto_opts.rto_expand;
943 		opts->rto_expand_offset = rto_opts.rto_expand_offset;
944 		opts->rto_v = 0; /* be quiet */
945 
946 		VERIFY3P(thread_create(NULL, 0, sweep_thread, (void *) opts,
947 		    0, NULL, TS_RUN, defclsyspri), !=, NULL);
948 	}
949 
950 exit:
951 	LOG(D_ALL, "\nWaiting for test threads to finish...\n");
952 	mutex_enter(&sem_mtx);
953 	VERIFY(free_slots <= max_free_slots);
954 	while (free_slots < max_free_slots) {
955 		(void) cv_wait(&sem_cv, &sem_mtx);
956 	}
957 	mutex_exit(&sem_mtx);
958 
959 	if (sweep_state == SWEEP_ERROR) {
960 		ERR("Sweep test failed! Failed option: \n");
961 		print_opts(&failed_opts, B_TRUE);
962 	} else {
963 		if (sweep_state == SWEEP_TIMEOUT)
964 			LOG(D_ALL, "Test timeout (%lus). Stopping...\n",
965 			    (ulong_t)rto_opts.rto_sweep_timeout);
966 
967 		LOG(D_ALL, "Sweep test succeeded on %lu raidz maps!\n",
968 		    (ulong_t)tried_comb);
969 	}
970 
971 	mutex_destroy(&sem_mtx);
972 
973 	return (sweep_state == SWEEP_ERROR ? SWEEP_ERROR : 0);
974 }
975 
976 
977 int
978 main(int argc, char **argv)
979 {
980 	size_t i;
981 	struct sigaction action;
982 	int err = 0;
983 
984 	/* init gdb pid string early */
985 	(void) sprintf(pid_s, "%d", getpid());
986 
987 	action.sa_handler = sig_handler;
988 	sigemptyset(&action.sa_mask);
989 	action.sa_flags = 0;
990 
991 	if (sigaction(SIGSEGV, &action, NULL) < 0) {
992 		ERR("raidz_test: cannot catch SIGSEGV: %s.\n", strerror(errno));
993 		exit(EXIT_FAILURE);
994 	}
995 
996 	(void) setvbuf(stdout, NULL, _IOLBF, 0);
997 
998 	dprintf_setup(&argc, argv);
999 
1000 	process_options(argc, argv);
1001 
1002 	kernel_init(SPA_MODE_READ);
1003 
1004 	/* setup random data because rand() is not reentrant */
1005 	rand_data = (int *)umem_alloc(SPA_MAXBLOCKSIZE, UMEM_NOFAIL);
1006 	srand((unsigned)time(NULL) * getpid());
1007 	for (i = 0; i < SPA_MAXBLOCKSIZE / sizeof (int); i++)
1008 		rand_data[i] = rand();
1009 
1010 	mprotect(rand_data, SPA_MAXBLOCKSIZE, PROT_READ);
1011 
1012 	if (rto_opts.rto_benchmark) {
1013 		run_raidz_benchmark();
1014 	} else if (rto_opts.rto_sweep) {
1015 		err = run_sweep();
1016 	} else {
1017 		err = run_test(NULL);
1018 	}
1019 
1020 	umem_free(rand_data, SPA_MAXBLOCKSIZE);
1021 	kernel_fini();
1022 
1023 	return (err);
1024 }
1025