1 /** @file 2 The device path protocol as defined in UEFI 2.0. 3 4 The device path represents a programmatic path to a device, 5 from a software point of view. The path must persist from boot to boot, so 6 it can not contain things like PCI bus numbers that change from boot to boot. 7 8 Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR> 9 This program and the accompanying materials are licensed and made available under 10 the terms and conditions of the BSD License that accompanies this distribution. 11 The full text of the license may be found at 12 http://opensource.org/licenses/bsd-license.php. 13 14 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 15 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 16 17 **/ 18 19 #ifndef __EFI_DEVICE_PATH_PROTOCOL_H__ 20 #define __EFI_DEVICE_PATH_PROTOCOL_H__ 21 22 #include <Guid/PcAnsi.h> 23 #include <IndustryStandard/Bluetooth.h> 24 #include <IndustryStandard/Acpi60.h> 25 26 /// 27 /// Device Path protocol. 28 /// 29 #define EFI_DEVICE_PATH_PROTOCOL_GUID \ 30 { \ 31 0x9576e91, 0x6d3f, 0x11d2, {0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \ 32 } 33 34 /// 35 /// Device Path guid definition for backward-compatible with EFI1.1. 36 /// 37 #define DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH_PROTOCOL_GUID 38 39 #pragma pack(1) 40 41 /** 42 This protocol can be used on any device handle to obtain generic path/location 43 information concerning the physical device or logical device. If the handle does 44 not logically map to a physical device, the handle may not necessarily support 45 the device path protocol. The device path describes the location of the device 46 the handle is for. The size of the Device Path can be determined from the structures 47 that make up the Device Path. 48 **/ 49 typedef struct { 50 UINT8 Type; ///< 0x01 Hardware Device Path. 51 ///< 0x02 ACPI Device Path. 52 ///< 0x03 Messaging Device Path. 53 ///< 0x04 Media Device Path. 54 ///< 0x05 BIOS Boot Specification Device Path. 55 ///< 0x7F End of Hardware Device Path. 56 57 UINT8 SubType; ///< Varies by Type 58 ///< 0xFF End Entire Device Path, or 59 ///< 0x01 End This Instance of a Device Path and start a new 60 ///< Device Path. 61 62 UINT8 Length[2]; ///< Specific Device Path data. Type and Sub-Type define 63 ///< type of data. Size of data is included in Length. 64 65 } EFI_DEVICE_PATH_PROTOCOL; 66 67 /// 68 /// Device Path protocol definition for backward-compatible with EFI1.1. 69 /// 70 typedef EFI_DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH; 71 72 /// 73 /// Hardware Device Paths. 74 /// 75 #define HARDWARE_DEVICE_PATH 0x01 76 77 /// 78 /// PCI Device Path SubType. 79 /// 80 #define HW_PCI_DP 0x01 81 82 /// 83 /// PCI Device Path. 84 /// 85 typedef struct { 86 EFI_DEVICE_PATH_PROTOCOL Header; 87 /// 88 /// PCI Function Number. 89 /// 90 UINT8 Function; 91 /// 92 /// PCI Device Number. 93 /// 94 UINT8 Device; 95 } PCI_DEVICE_PATH; 96 97 /// 98 /// PCCARD Device Path SubType. 99 /// 100 #define HW_PCCARD_DP 0x02 101 102 /// 103 /// PCCARD Device Path. 104 /// 105 typedef struct { 106 EFI_DEVICE_PATH_PROTOCOL Header; 107 /// 108 /// Function Number (0 = First Function). 109 /// 110 UINT8 FunctionNumber; 111 } PCCARD_DEVICE_PATH; 112 113 /// 114 /// Memory Mapped Device Path SubType. 115 /// 116 #define HW_MEMMAP_DP 0x03 117 118 /// 119 /// Memory Mapped Device Path. 120 /// 121 typedef struct { 122 EFI_DEVICE_PATH_PROTOCOL Header; 123 /// 124 /// EFI_MEMORY_TYPE 125 /// 126 UINT32 MemoryType; 127 /// 128 /// Starting Memory Address. 129 /// 130 EFI_PHYSICAL_ADDRESS StartingAddress; 131 /// 132 /// Ending Memory Address. 133 /// 134 EFI_PHYSICAL_ADDRESS EndingAddress; 135 } MEMMAP_DEVICE_PATH; 136 137 /// 138 /// Hardware Vendor Device Path SubType. 139 /// 140 #define HW_VENDOR_DP 0x04 141 142 /// 143 /// The Vendor Device Path allows the creation of vendor-defined Device Paths. A vendor must 144 /// allocate a Vendor GUID for a Device Path. The Vendor GUID can then be used to define the 145 /// contents on the n bytes that follow in the Vendor Device Path node. 146 /// 147 typedef struct { 148 EFI_DEVICE_PATH_PROTOCOL Header; 149 /// 150 /// Vendor-assigned GUID that defines the data that follows. 151 /// 152 EFI_GUID Guid; 153 /// 154 /// Vendor-defined variable size data. 155 /// 156 } VENDOR_DEVICE_PATH; 157 158 /// 159 /// Controller Device Path SubType. 160 /// 161 #define HW_CONTROLLER_DP 0x05 162 163 /// 164 /// Controller Device Path. 165 /// 166 typedef struct { 167 EFI_DEVICE_PATH_PROTOCOL Header; 168 /// 169 /// Controller number. 170 /// 171 UINT32 ControllerNumber; 172 } CONTROLLER_DEVICE_PATH; 173 174 /// 175 /// BMC Device Path SubType. 176 /// 177 #define HW_BMC_DP 0x06 178 179 /// 180 /// BMC Device Path. 181 /// 182 typedef struct { 183 EFI_DEVICE_PATH_PROTOCOL Header; 184 /// 185 /// Interface Type. 186 /// 187 UINT8 InterfaceType; 188 /// 189 /// Base Address. 190 /// 191 UINT8 BaseAddress[8]; 192 } BMC_DEVICE_PATH; 193 194 /// 195 /// ACPI Device Paths. 196 /// 197 #define ACPI_DEVICE_PATH 0x02 198 199 /// 200 /// ACPI Device Path SubType. 201 /// 202 #define ACPI_DP 0x01 203 typedef struct { 204 EFI_DEVICE_PATH_PROTOCOL Header; 205 /// 206 /// Device's PnP hardware ID stored in a numeric 32-bit 207 /// compressed EISA-type ID. This value must match the 208 /// corresponding _HID in the ACPI name space. 209 /// 210 UINT32 HID; 211 /// 212 /// Unique ID that is required by ACPI if two devices have the 213 /// same _HID. This value must also match the corresponding 214 /// _UID/_HID pair in the ACPI name space. Only the 32-bit 215 /// numeric value type of _UID is supported. Thus, strings must 216 /// not be used for the _UID in the ACPI name space. 217 /// 218 UINT32 UID; 219 } ACPI_HID_DEVICE_PATH; 220 221 /// 222 /// Expanded ACPI Device Path SubType. 223 /// 224 #define ACPI_EXTENDED_DP 0x02 225 typedef struct { 226 EFI_DEVICE_PATH_PROTOCOL Header; 227 /// 228 /// Device's PnP hardware ID stored in a numeric 32-bit 229 /// compressed EISA-type ID. This value must match the 230 /// corresponding _HID in the ACPI name space. 231 /// 232 UINT32 HID; 233 /// 234 /// Unique ID that is required by ACPI if two devices have the 235 /// same _HID. This value must also match the corresponding 236 /// _UID/_HID pair in the ACPI name space. 237 /// 238 UINT32 UID; 239 /// 240 /// Device's compatible PnP hardware ID stored in a numeric 241 /// 32-bit compressed EISA-type ID. This value must match at 242 /// least one of the compatible device IDs returned by the 243 /// corresponding _CID in the ACPI name space. 244 /// 245 UINT32 CID; 246 /// 247 /// Optional variable length _HIDSTR. 248 /// Optional variable length _UIDSTR. 249 /// Optional variable length _CIDSTR. 250 /// 251 } ACPI_EXTENDED_HID_DEVICE_PATH; 252 253 // 254 // EISA ID Macro 255 // EISA ID Definition 32-bits 256 // bits[15:0] - three character compressed ASCII EISA ID. 257 // bits[31:16] - binary number 258 // Compressed ASCII is 5 bits per character 0b00001 = 'A' 0b11010 = 'Z' 259 // 260 #define PNP_EISA_ID_CONST 0x41d0 261 #define EISA_ID(_Name, _Num) ((UINT32)((_Name) | (_Num) << 16)) 262 #define EISA_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId))) 263 #define EFI_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId))) 264 265 #define PNP_EISA_ID_MASK 0xffff 266 #define EISA_ID_TO_NUM(_Id) ((_Id) >> 16) 267 268 /// 269 /// ACPI _ADR Device Path SubType. 270 /// 271 #define ACPI_ADR_DP 0x03 272 273 /// 274 /// The _ADR device path is used to contain video output device attributes to support the Graphics 275 /// Output Protocol. The device path can contain multiple _ADR entries if multiple video output 276 /// devices are displaying the same output. 277 /// 278 typedef struct { 279 EFI_DEVICE_PATH_PROTOCOL Header; 280 /// 281 /// _ADR value. For video output devices the value of this 282 /// field comes from Table B-2 of the ACPI 3.0 specification. At 283 /// least one _ADR value is required. 284 /// 285 UINT32 ADR; 286 // 287 // This device path may optionally contain more than one _ADR entry. 288 // 289 } ACPI_ADR_DEVICE_PATH; 290 291 #define ACPI_ADR_DISPLAY_TYPE_OTHER 0 292 #define ACPI_ADR_DISPLAY_TYPE_VGA 1 293 #define ACPI_ADR_DISPLAY_TYPE_TV 2 294 #define ACPI_ADR_DISPLAY_TYPE_EXTERNAL_DIGITAL 3 295 #define ACPI_ADR_DISPLAY_TYPE_INTERNAL_DIGITAL 4 296 297 #define ACPI_DISPLAY_ADR(_DeviceIdScheme, _HeadId, _NonVgaOutput, _BiosCanDetect, _VendorInfo, _Type, _Port, _Index) \ 298 ((UINT32)( ((UINT32)((_DeviceIdScheme) & 0x1) << 31) | \ 299 (((_HeadId) & 0x7) << 18) | \ 300 (((_NonVgaOutput) & 0x1) << 17) | \ 301 (((_BiosCanDetect) & 0x1) << 16) | \ 302 (((_VendorInfo) & 0xf) << 12) | \ 303 (((_Type) & 0xf) << 8) | \ 304 (((_Port) & 0xf) << 4) | \ 305 ((_Index) & 0xf) )) 306 307 /// 308 /// Messaging Device Paths. 309 /// This Device Path is used to describe the connection of devices outside the resource domain of the 310 /// system. This Device Path can describe physical messaging information like SCSI ID, or abstract 311 /// information like networking protocol IP addresses. 312 /// 313 #define MESSAGING_DEVICE_PATH 0x03 314 315 /// 316 /// ATAPI Device Path SubType 317 /// 318 #define MSG_ATAPI_DP 0x01 319 typedef struct { 320 EFI_DEVICE_PATH_PROTOCOL Header; 321 /// 322 /// Set to zero for primary, or one for secondary. 323 /// 324 UINT8 PrimarySecondary; 325 /// 326 /// Set to zero for master, or one for slave mode. 327 /// 328 UINT8 SlaveMaster; 329 /// 330 /// Logical Unit Number. 331 /// 332 UINT16 Lun; 333 } ATAPI_DEVICE_PATH; 334 335 /// 336 /// SCSI Device Path SubType. 337 /// 338 #define MSG_SCSI_DP 0x02 339 typedef struct { 340 EFI_DEVICE_PATH_PROTOCOL Header; 341 /// 342 /// Target ID on the SCSI bus (PUN). 343 /// 344 UINT16 Pun; 345 /// 346 /// Logical Unit Number (LUN). 347 /// 348 UINT16 Lun; 349 } SCSI_DEVICE_PATH; 350 351 /// 352 /// Fibre Channel SubType. 353 /// 354 #define MSG_FIBRECHANNEL_DP 0x03 355 typedef struct { 356 EFI_DEVICE_PATH_PROTOCOL Header; 357 /// 358 /// Reserved for the future. 359 /// 360 UINT32 Reserved; 361 /// 362 /// Fibre Channel World Wide Number. 363 /// 364 UINT64 WWN; 365 /// 366 /// Fibre Channel Logical Unit Number. 367 /// 368 UINT64 Lun; 369 } FIBRECHANNEL_DEVICE_PATH; 370 371 /// 372 /// Fibre Channel Ex SubType. 373 /// 374 #define MSG_FIBRECHANNELEX_DP 0x15 375 typedef struct { 376 EFI_DEVICE_PATH_PROTOCOL Header; 377 /// 378 /// Reserved for the future. 379 /// 380 UINT32 Reserved; 381 /// 382 /// 8 byte array containing Fibre Channel End Device Port Name. 383 /// 384 UINT8 WWN[8]; 385 /// 386 /// 8 byte array containing Fibre Channel Logical Unit Number. 387 /// 388 UINT8 Lun[8]; 389 } FIBRECHANNELEX_DEVICE_PATH; 390 391 /// 392 /// 1394 Device Path SubType 393 /// 394 #define MSG_1394_DP 0x04 395 typedef struct { 396 EFI_DEVICE_PATH_PROTOCOL Header; 397 /// 398 /// Reserved for the future. 399 /// 400 UINT32 Reserved; 401 /// 402 /// 1394 Global Unique ID (GUID). 403 /// 404 UINT64 Guid; 405 } F1394_DEVICE_PATH; 406 407 /// 408 /// USB Device Path SubType. 409 /// 410 #define MSG_USB_DP 0x05 411 typedef struct { 412 EFI_DEVICE_PATH_PROTOCOL Header; 413 /// 414 /// USB Parent Port Number. 415 /// 416 UINT8 ParentPortNumber; 417 /// 418 /// USB Interface Number. 419 /// 420 UINT8 InterfaceNumber; 421 } USB_DEVICE_PATH; 422 423 /// 424 /// USB Class Device Path SubType. 425 /// 426 #define MSG_USB_CLASS_DP 0x0f 427 typedef struct { 428 EFI_DEVICE_PATH_PROTOCOL Header; 429 /// 430 /// Vendor ID assigned by USB-IF. A value of 0xFFFF will 431 /// match any Vendor ID. 432 /// 433 UINT16 VendorId; 434 /// 435 /// Product ID assigned by USB-IF. A value of 0xFFFF will 436 /// match any Product ID. 437 /// 438 UINT16 ProductId; 439 /// 440 /// The class code assigned by the USB-IF. A value of 0xFF 441 /// will match any class code. 442 /// 443 UINT8 DeviceClass; 444 /// 445 /// The subclass code assigned by the USB-IF. A value of 446 /// 0xFF will match any subclass code. 447 /// 448 UINT8 DeviceSubClass; 449 /// 450 /// The protocol code assigned by the USB-IF. A value of 451 /// 0xFF will match any protocol code. 452 /// 453 UINT8 DeviceProtocol; 454 } USB_CLASS_DEVICE_PATH; 455 456 /// 457 /// USB WWID Device Path SubType. 458 /// 459 #define MSG_USB_WWID_DP 0x10 460 461 /// 462 /// This device path describes a USB device using its serial number. 463 /// 464 typedef struct { 465 EFI_DEVICE_PATH_PROTOCOL Header; 466 /// 467 /// USB interface number. 468 /// 469 UINT16 InterfaceNumber; 470 /// 471 /// USB vendor id of the device. 472 /// 473 UINT16 VendorId; 474 /// 475 /// USB product id of the device. 476 /// 477 UINT16 ProductId; 478 /// 479 /// Last 64-or-fewer UTF-16 characters of the USB 480 /// serial number. The length of the string is 481 /// determined by the Length field less the offset of the 482 /// Serial Number field (10) 483 /// 484 /// CHAR16 SerialNumber[...]; 485 } USB_WWID_DEVICE_PATH; 486 487 /// 488 /// Device Logical Unit SubType. 489 /// 490 #define MSG_DEVICE_LOGICAL_UNIT_DP 0x11 491 typedef struct { 492 EFI_DEVICE_PATH_PROTOCOL Header; 493 /// 494 /// Logical Unit Number for the interface. 495 /// 496 UINT8 Lun; 497 } DEVICE_LOGICAL_UNIT_DEVICE_PATH; 498 499 /// 500 /// SATA Device Path SubType. 501 /// 502 #define MSG_SATA_DP 0x12 503 typedef struct { 504 EFI_DEVICE_PATH_PROTOCOL Header; 505 /// 506 /// The HBA port number that facilitates the connection to the 507 /// device or a port multiplier. The value 0xFFFF is reserved. 508 /// 509 UINT16 HBAPortNumber; 510 /// 511 /// The Port multiplier port number that facilitates the connection 512 /// to the device. Must be set to 0xFFFF if the device is directly 513 /// connected to the HBA. 514 /// 515 UINT16 PortMultiplierPortNumber; 516 /// 517 /// Logical Unit Number. 518 /// 519 UINT16 Lun; 520 } SATA_DEVICE_PATH; 521 522 /// 523 /// Flag for if the device is directly connected to the HBA. 524 /// 525 #define SATA_HBA_DIRECT_CONNECT_FLAG 0x8000 526 527 /// 528 /// I2O Device Path SubType. 529 /// 530 #define MSG_I2O_DP 0x06 531 typedef struct { 532 EFI_DEVICE_PATH_PROTOCOL Header; 533 /// 534 /// Target ID (TID) for a device. 535 /// 536 UINT32 Tid; 537 } I2O_DEVICE_PATH; 538 539 /// 540 /// MAC Address Device Path SubType. 541 /// 542 #define MSG_MAC_ADDR_DP 0x0b 543 typedef struct { 544 EFI_DEVICE_PATH_PROTOCOL Header; 545 /// 546 /// The MAC address for a network interface padded with 0s. 547 /// 548 EFI_MAC_ADDRESS MacAddress; 549 /// 550 /// Network interface type(i.e. 802.3, FDDI). 551 /// 552 UINT8 IfType; 553 } MAC_ADDR_DEVICE_PATH; 554 555 /// 556 /// IPv4 Device Path SubType 557 /// 558 #define MSG_IPv4_DP 0x0c 559 typedef struct { 560 EFI_DEVICE_PATH_PROTOCOL Header; 561 /// 562 /// The local IPv4 address. 563 /// 564 EFI_IPv4_ADDRESS LocalIpAddress; 565 /// 566 /// The remote IPv4 address. 567 /// 568 EFI_IPv4_ADDRESS RemoteIpAddress; 569 /// 570 /// The local port number. 571 /// 572 UINT16 LocalPort; 573 /// 574 /// The remote port number. 575 /// 576 UINT16 RemotePort; 577 /// 578 /// The network protocol(i.e. UDP, TCP). 579 /// 580 UINT16 Protocol; 581 /// 582 /// 0x00 - The Source IP Address was assigned though DHCP. 583 /// 0x01 - The Source IP Address is statically bound. 584 /// 585 BOOLEAN StaticIpAddress; 586 /// 587 /// The gateway IP address 588 /// 589 EFI_IPv4_ADDRESS GatewayIpAddress; 590 /// 591 /// The subnet mask 592 /// 593 EFI_IPv4_ADDRESS SubnetMask; 594 } IPv4_DEVICE_PATH; 595 596 /// 597 /// IPv6 Device Path SubType. 598 /// 599 #define MSG_IPv6_DP 0x0d 600 typedef struct { 601 EFI_DEVICE_PATH_PROTOCOL Header; 602 /// 603 /// The local IPv6 address. 604 /// 605 EFI_IPv6_ADDRESS LocalIpAddress; 606 /// 607 /// The remote IPv6 address. 608 /// 609 EFI_IPv6_ADDRESS RemoteIpAddress; 610 /// 611 /// The local port number. 612 /// 613 UINT16 LocalPort; 614 /// 615 /// The remote port number. 616 /// 617 UINT16 RemotePort; 618 /// 619 /// The network protocol(i.e. UDP, TCP). 620 /// 621 UINT16 Protocol; 622 /// 623 /// 0x00 - The Local IP Address was manually configured. 624 /// 0x01 - The Local IP Address is assigned through IPv6 625 /// stateless auto-configuration. 626 /// 0x02 - The Local IP Address is assigned through IPv6 627 /// stateful configuration. 628 /// 629 UINT8 IpAddressOrigin; 630 /// 631 /// The prefix length 632 /// 633 UINT8 PrefixLength; 634 /// 635 /// The gateway IP address 636 /// 637 EFI_IPv6_ADDRESS GatewayIpAddress; 638 } IPv6_DEVICE_PATH; 639 640 /// 641 /// InfiniBand Device Path SubType. 642 /// 643 #define MSG_INFINIBAND_DP 0x09 644 typedef struct { 645 EFI_DEVICE_PATH_PROTOCOL Header; 646 /// 647 /// Flags to help identify/manage InfiniBand device path elements: 648 /// Bit 0 - IOC/Service (0b = IOC, 1b = Service). 649 /// Bit 1 - Extend Boot Environment. 650 /// Bit 2 - Console Protocol. 651 /// Bit 3 - Storage Protocol. 652 /// Bit 4 - Network Protocol. 653 /// All other bits are reserved. 654 /// 655 UINT32 ResourceFlags; 656 /// 657 /// 128-bit Global Identifier for remote fabric port. 658 /// 659 UINT8 PortGid[16]; 660 /// 661 /// 64-bit unique identifier to remote IOC or server process. 662 /// Interpretation of field specified by Resource Flags (bit 0). 663 /// 664 UINT64 ServiceId; 665 /// 666 /// 64-bit persistent ID of remote IOC port. 667 /// 668 UINT64 TargetPortId; 669 /// 670 /// 64-bit persistent ID of remote device. 671 /// 672 UINT64 DeviceId; 673 } INFINIBAND_DEVICE_PATH; 674 675 #define INFINIBAND_RESOURCE_FLAG_IOC_SERVICE 0x01 676 #define INFINIBAND_RESOURCE_FLAG_EXTENDED_BOOT_ENVIRONMENT 0x02 677 #define INFINIBAND_RESOURCE_FLAG_CONSOLE_PROTOCOL 0x04 678 #define INFINIBAND_RESOURCE_FLAG_STORAGE_PROTOCOL 0x08 679 #define INFINIBAND_RESOURCE_FLAG_NETWORK_PROTOCOL 0x10 680 681 /// 682 /// UART Device Path SubType. 683 /// 684 #define MSG_UART_DP 0x0e 685 typedef struct { 686 EFI_DEVICE_PATH_PROTOCOL Header; 687 /// 688 /// Reserved. 689 /// 690 UINT32 Reserved; 691 /// 692 /// The baud rate setting for the UART style device. A value of 0 693 /// means that the device's default baud rate will be used. 694 /// 695 UINT64 BaudRate; 696 /// 697 /// The number of data bits for the UART style device. A value 698 /// of 0 means that the device's default number of data bits will be used. 699 /// 700 UINT8 DataBits; 701 /// 702 /// The parity setting for the UART style device. 703 /// Parity 0x00 - Default Parity. 704 /// Parity 0x01 - No Parity. 705 /// Parity 0x02 - Even Parity. 706 /// Parity 0x03 - Odd Parity. 707 /// Parity 0x04 - Mark Parity. 708 /// Parity 0x05 - Space Parity. 709 /// 710 UINT8 Parity; 711 /// 712 /// The number of stop bits for the UART style device. 713 /// Stop Bits 0x00 - Default Stop Bits. 714 /// Stop Bits 0x01 - 1 Stop Bit. 715 /// Stop Bits 0x02 - 1.5 Stop Bits. 716 /// Stop Bits 0x03 - 2 Stop Bits. 717 /// 718 UINT8 StopBits; 719 } UART_DEVICE_PATH; 720 721 // 722 // Use VENDOR_DEVICE_PATH struct 723 // 724 #define MSG_VENDOR_DP 0x0a 725 typedef VENDOR_DEVICE_PATH VENDOR_DEFINED_DEVICE_PATH; 726 727 #define DEVICE_PATH_MESSAGING_PC_ANSI EFI_PC_ANSI_GUID 728 #define DEVICE_PATH_MESSAGING_VT_100 EFI_VT_100_GUID 729 #define DEVICE_PATH_MESSAGING_VT_100_PLUS EFI_VT_100_PLUS_GUID 730 #define DEVICE_PATH_MESSAGING_VT_UTF8 EFI_VT_UTF8_GUID 731 732 /// 733 /// A new device path node is defined to declare flow control characteristics. 734 /// UART Flow Control Messaging Device Path 735 /// 736 typedef struct { 737 EFI_DEVICE_PATH_PROTOCOL Header; 738 /// 739 /// DEVICE_PATH_MESSAGING_UART_FLOW_CONTROL GUID. 740 /// 741 EFI_GUID Guid; 742 /// 743 /// Bitmap of supported flow control types. 744 /// Bit 0 set indicates hardware flow control. 745 /// Bit 1 set indicates Xon/Xoff flow control. 746 /// All other bits are reserved and are clear. 747 /// 748 UINT32 FlowControlMap; 749 } UART_FLOW_CONTROL_DEVICE_PATH; 750 751 #define UART_FLOW_CONTROL_HARDWARE 0x00000001 752 #define UART_FLOW_CONTROL_XON_XOFF 0x00000010 753 754 #define DEVICE_PATH_MESSAGING_SAS EFI_SAS_DEVICE_PATH_GUID 755 /// 756 /// Serial Attached SCSI (SAS) Device Path. 757 /// 758 typedef struct { 759 EFI_DEVICE_PATH_PROTOCOL Header; 760 /// 761 /// DEVICE_PATH_MESSAGING_SAS GUID. 762 /// 763 EFI_GUID Guid; 764 /// 765 /// Reserved for future use. 766 /// 767 UINT32 Reserved; 768 /// 769 /// SAS Address for Serial Attached SCSI Target. 770 /// 771 UINT64 SasAddress; 772 /// 773 /// SAS Logical Unit Number. 774 /// 775 UINT64 Lun; 776 /// 777 /// More Information about the device and its interconnect. 778 /// 779 UINT16 DeviceTopology; 780 /// 781 /// Relative Target Port (RTP). 782 /// 783 UINT16 RelativeTargetPort; 784 } SAS_DEVICE_PATH; 785 786 /// 787 /// Serial Attached SCSI (SAS) Ex Device Path SubType 788 /// 789 #define MSG_SASEX_DP 0x16 790 typedef struct { 791 EFI_DEVICE_PATH_PROTOCOL Header; 792 /// 793 /// 8-byte array of the SAS Address for Serial Attached SCSI Target Port. 794 /// 795 UINT8 SasAddress[8]; 796 /// 797 /// 8-byte array of the SAS Logical Unit Number. 798 /// 799 UINT8 Lun[8]; 800 /// 801 /// More Information about the device and its interconnect. 802 /// 803 UINT16 DeviceTopology; 804 /// 805 /// Relative Target Port (RTP). 806 /// 807 UINT16 RelativeTargetPort; 808 } SASEX_DEVICE_PATH; 809 810 /// 811 /// NvmExpress Namespace Device Path SubType. 812 /// 813 #define MSG_NVME_NAMESPACE_DP 0x17 814 typedef struct { 815 EFI_DEVICE_PATH_PROTOCOL Header; 816 UINT32 NamespaceId; 817 UINT64 NamespaceUuid; 818 } NVME_NAMESPACE_DEVICE_PATH; 819 820 /// 821 /// Uniform Resource Identifiers (URI) Device Path SubType 822 /// 823 #define MSG_URI_DP 0x18 824 typedef struct { 825 EFI_DEVICE_PATH_PROTOCOL Header; 826 /// 827 /// Instance of the URI pursuant to RFC 3986. 828 /// 829 CHAR8 Uri[]; 830 } URI_DEVICE_PATH; 831 832 /// 833 /// Universal Flash Storage (UFS) Device Path SubType. 834 /// 835 #define MSG_UFS_DP 0x19 836 typedef struct { 837 EFI_DEVICE_PATH_PROTOCOL Header; 838 /// 839 /// Target ID on the UFS bus (PUN). 840 /// 841 UINT8 Pun; 842 /// 843 /// Logical Unit Number (LUN). 844 /// 845 UINT8 Lun; 846 } UFS_DEVICE_PATH; 847 848 /// 849 /// SD (Secure Digital) Device Path SubType. 850 /// 851 #define MSG_SD_DP 0x1A 852 typedef struct { 853 EFI_DEVICE_PATH_PROTOCOL Header; 854 UINT8 SlotNumber; 855 } SD_DEVICE_PATH; 856 857 /// 858 /// EMMC (Embedded MMC) Device Path SubType. 859 /// 860 #define MSG_EMMC_DP 0x1D 861 typedef struct { 862 EFI_DEVICE_PATH_PROTOCOL Header; 863 UINT8 SlotNumber; 864 } EMMC_DEVICE_PATH; 865 866 /// 867 /// iSCSI Device Path SubType 868 /// 869 #define MSG_ISCSI_DP 0x13 870 typedef struct { 871 EFI_DEVICE_PATH_PROTOCOL Header; 872 /// 873 /// Network Protocol (0 = TCP, 1+ = reserved). 874 /// 875 UINT16 NetworkProtocol; 876 /// 877 /// iSCSI Login Options. 878 /// 879 UINT16 LoginOption; 880 /// 881 /// iSCSI Logical Unit Number. 882 /// 883 UINT64 Lun; 884 /// 885 /// iSCSI Target Portal group tag the initiator intends 886 /// to establish a session with. 887 /// 888 UINT16 TargetPortalGroupTag; 889 /// 890 /// iSCSI NodeTarget Name. The length of the name 891 /// is determined by subtracting the offset of this field from Length. 892 /// 893 /// CHAR8 iSCSI Target Name. 894 } ISCSI_DEVICE_PATH; 895 896 #define ISCSI_LOGIN_OPTION_NO_HEADER_DIGEST 0x0000 897 #define ISCSI_LOGIN_OPTION_HEADER_DIGEST_USING_CRC32C 0x0002 898 #define ISCSI_LOGIN_OPTION_NO_DATA_DIGEST 0x0000 899 #define ISCSI_LOGIN_OPTION_DATA_DIGEST_USING_CRC32C 0x0008 900 #define ISCSI_LOGIN_OPTION_AUTHMETHOD_CHAP 0x0000 901 #define ISCSI_LOGIN_OPTION_AUTHMETHOD_NON 0x1000 902 #define ISCSI_LOGIN_OPTION_CHAP_BI 0x0000 903 #define ISCSI_LOGIN_OPTION_CHAP_UNI 0x2000 904 905 /// 906 /// VLAN Device Path SubType. 907 /// 908 #define MSG_VLAN_DP 0x14 909 typedef struct { 910 EFI_DEVICE_PATH_PROTOCOL Header; 911 /// 912 /// VLAN identifier (0-4094). 913 /// 914 UINT16 VlanId; 915 } VLAN_DEVICE_PATH; 916 917 /// 918 /// Bluetooth Device Path SubType. 919 /// 920 #define MSG_BLUETOOTH_DP 0x1b 921 typedef struct { 922 EFI_DEVICE_PATH_PROTOCOL Header; 923 /// 924 /// 48bit Bluetooth device address. 925 /// 926 BLUETOOTH_ADDRESS BD_ADDR; 927 } BLUETOOTH_DEVICE_PATH; 928 929 /// 930 /// Wi-Fi Device Path SubType. 931 /// 932 #define MSG_WIFI_DP 0x1C 933 typedef struct { 934 EFI_DEVICE_PATH_PROTOCOL Header; 935 /// 936 /// Service set identifier. A 32-byte octets string. 937 /// 938 UINT8 SSId[32]; 939 } WIFI_DEVICE_PATH; 940 941 // 942 // Media Device Path 943 // 944 #define MEDIA_DEVICE_PATH 0x04 945 946 /// 947 /// Hard Drive Media Device Path SubType. 948 /// 949 #define MEDIA_HARDDRIVE_DP 0x01 950 951 /// 952 /// The Hard Drive Media Device Path is used to represent a partition on a hard drive. 953 /// 954 typedef struct { 955 EFI_DEVICE_PATH_PROTOCOL Header; 956 /// 957 /// Describes the entry in a partition table, starting with entry 1. 958 /// Partition number zero represents the entire device. Valid 959 /// partition numbers for a MBR partition are [1, 4]. Valid 960 /// partition numbers for a GPT partition are [1, NumberOfPartitionEntries]. 961 /// 962 UINT32 PartitionNumber; 963 /// 964 /// Starting LBA of the partition on the hard drive. 965 /// 966 UINT64 PartitionStart; 967 /// 968 /// Size of the partition in units of Logical Blocks. 969 /// 970 UINT64 PartitionSize; 971 /// 972 /// Signature unique to this partition: 973 /// If SignatureType is 0, this field has to be initialized with 16 zeros. 974 /// If SignatureType is 1, the MBR signature is stored in the first 4 bytes of this field. 975 /// The other 12 bytes are initialized with zeros. 976 /// If SignatureType is 2, this field contains a 16 byte signature. 977 /// 978 UINT8 Signature[16]; 979 /// 980 /// Partition Format: (Unused values reserved). 981 /// 0x01 - PC-AT compatible legacy MBR. 982 /// 0x02 - GUID Partition Table. 983 /// 984 UINT8 MBRType; 985 /// 986 /// Type of Disk Signature: (Unused values reserved). 987 /// 0x00 - No Disk Signature. 988 /// 0x01 - 32-bit signature from address 0x1b8 of the type 0x01 MBR. 989 /// 0x02 - GUID signature. 990 /// 991 UINT8 SignatureType; 992 } HARDDRIVE_DEVICE_PATH; 993 994 #define MBR_TYPE_PCAT 0x01 995 #define MBR_TYPE_EFI_PARTITION_TABLE_HEADER 0x02 996 997 #define NO_DISK_SIGNATURE 0x00 998 #define SIGNATURE_TYPE_MBR 0x01 999 #define SIGNATURE_TYPE_GUID 0x02 1000 1001 /// 1002 /// CD-ROM Media Device Path SubType. 1003 /// 1004 #define MEDIA_CDROM_DP 0x02 1005 1006 /// 1007 /// The CD-ROM Media Device Path is used to define a system partition that exists on a CD-ROM. 1008 /// 1009 typedef struct { 1010 EFI_DEVICE_PATH_PROTOCOL Header; 1011 /// 1012 /// Boot Entry number from the Boot Catalog. The Initial/Default entry is defined as zero. 1013 /// 1014 UINT32 BootEntry; 1015 /// 1016 /// Starting RBA of the partition on the medium. CD-ROMs use Relative logical Block Addressing. 1017 /// 1018 UINT64 PartitionStart; 1019 /// 1020 /// Size of the partition in units of Blocks, also called Sectors. 1021 /// 1022 UINT64 PartitionSize; 1023 } CDROM_DEVICE_PATH; 1024 1025 // 1026 // Use VENDOR_DEVICE_PATH struct 1027 // 1028 #define MEDIA_VENDOR_DP 0x03 ///< Media vendor device path subtype. 1029 1030 /// 1031 /// File Path Media Device Path SubType 1032 /// 1033 #define MEDIA_FILEPATH_DP 0x04 1034 typedef struct { 1035 EFI_DEVICE_PATH_PROTOCOL Header; 1036 /// 1037 /// A NULL-terminated Path string including directory and file names. 1038 /// 1039 CHAR16 PathName[1]; 1040 } FILEPATH_DEVICE_PATH; 1041 1042 #define SIZE_OF_FILEPATH_DEVICE_PATH OFFSET_OF(FILEPATH_DEVICE_PATH,PathName) 1043 1044 /// 1045 /// Media Protocol Device Path SubType. 1046 /// 1047 #define MEDIA_PROTOCOL_DP 0x05 1048 1049 /// 1050 /// The Media Protocol Device Path is used to denote the protocol that is being 1051 /// used in a device path at the location of the path specified. 1052 /// Many protocols are inherent to the style of device path. 1053 /// 1054 typedef struct { 1055 EFI_DEVICE_PATH_PROTOCOL Header; 1056 /// 1057 /// The ID of the protocol. 1058 /// 1059 EFI_GUID Protocol; 1060 } MEDIA_PROTOCOL_DEVICE_PATH; 1061 1062 /// 1063 /// PIWG Firmware File SubType. 1064 /// 1065 #define MEDIA_PIWG_FW_FILE_DP 0x06 1066 1067 /// 1068 /// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware file. 1069 /// 1070 typedef struct { 1071 EFI_DEVICE_PATH_PROTOCOL Header; 1072 /// 1073 /// Firmware file name 1074 /// 1075 EFI_GUID FvFileName; 1076 } MEDIA_FW_VOL_FILEPATH_DEVICE_PATH; 1077 1078 /// 1079 /// PIWG Firmware Volume Device Path SubType. 1080 /// 1081 #define MEDIA_PIWG_FW_VOL_DP 0x07 1082 1083 /// 1084 /// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware volume. 1085 /// 1086 typedef struct { 1087 EFI_DEVICE_PATH_PROTOCOL Header; 1088 /// 1089 /// Firmware volume name. 1090 /// 1091 EFI_GUID FvName; 1092 } MEDIA_FW_VOL_DEVICE_PATH; 1093 1094 /// 1095 /// Media relative offset range device path. 1096 /// 1097 #define MEDIA_RELATIVE_OFFSET_RANGE_DP 0x08 1098 1099 /// 1100 /// Used to describe the offset range of media relative. 1101 /// 1102 typedef struct { 1103 EFI_DEVICE_PATH_PROTOCOL Header; 1104 UINT32 Reserved; 1105 UINT64 StartingOffset; 1106 UINT64 EndingOffset; 1107 } MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH; 1108 1109 /// 1110 /// This GUID defines a RAM Disk supporting a raw disk format in volatile memory. 1111 /// 1112 #define EFI_VIRTUAL_DISK_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_DISK_REGION_VOLATILE 1113 1114 extern EFI_GUID gEfiVirtualDiskGuid; 1115 1116 /// 1117 /// This GUID defines a RAM Disk supporting an ISO image in volatile memory. 1118 /// 1119 #define EFI_VIRTUAL_CD_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_CD_REGION_VOLATILE 1120 1121 extern EFI_GUID gEfiVirtualCdGuid; 1122 1123 /// 1124 /// This GUID defines a RAM Disk supporting a raw disk format in persistent memory. 1125 /// 1126 #define EFI_PERSISTENT_VIRTUAL_DISK_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_DISK_REGION_PERSISTENT 1127 1128 extern EFI_GUID gEfiPersistentVirtualDiskGuid; 1129 1130 /// 1131 /// This GUID defines a RAM Disk supporting an ISO image in persistent memory. 1132 /// 1133 #define EFI_PERSISTENT_VIRTUAL_CD_GUID EFI_ACPI_6_0_NFIT_GUID_RAM_DISK_SUPPORTING_VIRTUAL_CD_REGION_PERSISTENT 1134 1135 extern EFI_GUID gEfiPersistentVirtualCdGuid; 1136 1137 /// 1138 /// Media ram disk device path. 1139 /// 1140 #define MEDIA_RAM_DISK_DP 0x09 1141 1142 /// 1143 /// Used to describe the ram disk device path. 1144 /// 1145 typedef struct { 1146 EFI_DEVICE_PATH_PROTOCOL Header; 1147 /// 1148 /// Starting Memory Address. 1149 /// 1150 UINT32 StartingAddr[2]; 1151 /// 1152 /// Ending Memory Address. 1153 /// 1154 UINT32 EndingAddr[2]; 1155 /// 1156 /// GUID that defines the type of the RAM Disk. 1157 /// 1158 EFI_GUID TypeGuid; 1159 /// 1160 /// RAM Diskinstance number, if supported. The default value is zero. 1161 /// 1162 UINT16 Instance; 1163 } MEDIA_RAM_DISK_DEVICE_PATH; 1164 1165 /// 1166 /// BIOS Boot Specification Device Path. 1167 /// 1168 #define BBS_DEVICE_PATH 0x05 1169 1170 /// 1171 /// BIOS Boot Specification Device Path SubType. 1172 /// 1173 #define BBS_BBS_DP 0x01 1174 1175 /// 1176 /// This Device Path is used to describe the booting of non-EFI-aware operating systems. 1177 /// 1178 typedef struct { 1179 EFI_DEVICE_PATH_PROTOCOL Header; 1180 /// 1181 /// Device Type as defined by the BIOS Boot Specification. 1182 /// 1183 UINT16 DeviceType; 1184 /// 1185 /// Status Flags as defined by the BIOS Boot Specification. 1186 /// 1187 UINT16 StatusFlag; 1188 /// 1189 /// Null-terminated ASCII string that describes the boot device to a user. 1190 /// 1191 CHAR8 String[1]; 1192 } BBS_BBS_DEVICE_PATH; 1193 1194 // 1195 // DeviceType definitions - from BBS specification 1196 // 1197 #define BBS_TYPE_FLOPPY 0x01 1198 #define BBS_TYPE_HARDDRIVE 0x02 1199 #define BBS_TYPE_CDROM 0x03 1200 #define BBS_TYPE_PCMCIA 0x04 1201 #define BBS_TYPE_USB 0x05 1202 #define BBS_TYPE_EMBEDDED_NETWORK 0x06 1203 #define BBS_TYPE_BEV 0x80 1204 #define BBS_TYPE_UNKNOWN 0xFF 1205 1206 1207 /// 1208 /// Union of all possible Device Paths and pointers to Device Paths. 1209 /// 1210 typedef union { 1211 EFI_DEVICE_PATH_PROTOCOL DevPath; 1212 PCI_DEVICE_PATH Pci; 1213 PCCARD_DEVICE_PATH PcCard; 1214 MEMMAP_DEVICE_PATH MemMap; 1215 VENDOR_DEVICE_PATH Vendor; 1216 1217 CONTROLLER_DEVICE_PATH Controller; 1218 BMC_DEVICE_PATH Bmc; 1219 ACPI_HID_DEVICE_PATH Acpi; 1220 ACPI_EXTENDED_HID_DEVICE_PATH ExtendedAcpi; 1221 ACPI_ADR_DEVICE_PATH AcpiAdr; 1222 1223 ATAPI_DEVICE_PATH Atapi; 1224 SCSI_DEVICE_PATH Scsi; 1225 ISCSI_DEVICE_PATH Iscsi; 1226 FIBRECHANNEL_DEVICE_PATH FibreChannel; 1227 FIBRECHANNELEX_DEVICE_PATH FibreChannelEx; 1228 1229 F1394_DEVICE_PATH F1394; 1230 USB_DEVICE_PATH Usb; 1231 SATA_DEVICE_PATH Sata; 1232 USB_CLASS_DEVICE_PATH UsbClass; 1233 USB_WWID_DEVICE_PATH UsbWwid; 1234 DEVICE_LOGICAL_UNIT_DEVICE_PATH LogicUnit; 1235 I2O_DEVICE_PATH I2O; 1236 MAC_ADDR_DEVICE_PATH MacAddr; 1237 IPv4_DEVICE_PATH Ipv4; 1238 IPv6_DEVICE_PATH Ipv6; 1239 VLAN_DEVICE_PATH Vlan; 1240 INFINIBAND_DEVICE_PATH InfiniBand; 1241 UART_DEVICE_PATH Uart; 1242 UART_FLOW_CONTROL_DEVICE_PATH UartFlowControl; 1243 SAS_DEVICE_PATH Sas; 1244 SASEX_DEVICE_PATH SasEx; 1245 NVME_NAMESPACE_DEVICE_PATH NvmeNamespace; 1246 URI_DEVICE_PATH Uri; 1247 BLUETOOTH_DEVICE_PATH Bluetooth; 1248 WIFI_DEVICE_PATH WiFi; 1249 UFS_DEVICE_PATH Ufs; 1250 SD_DEVICE_PATH Sd; 1251 EMMC_DEVICE_PATH Emmc; 1252 HARDDRIVE_DEVICE_PATH HardDrive; 1253 CDROM_DEVICE_PATH CD; 1254 1255 FILEPATH_DEVICE_PATH FilePath; 1256 MEDIA_PROTOCOL_DEVICE_PATH MediaProtocol; 1257 1258 MEDIA_FW_VOL_DEVICE_PATH FirmwareVolume; 1259 MEDIA_FW_VOL_FILEPATH_DEVICE_PATH FirmwareFile; 1260 MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH Offset; 1261 MEDIA_RAM_DISK_DEVICE_PATH RamDisk; 1262 BBS_BBS_DEVICE_PATH Bbs; 1263 } EFI_DEV_PATH; 1264 1265 1266 1267 typedef union { 1268 EFI_DEVICE_PATH_PROTOCOL *DevPath; 1269 PCI_DEVICE_PATH *Pci; 1270 PCCARD_DEVICE_PATH *PcCard; 1271 MEMMAP_DEVICE_PATH *MemMap; 1272 VENDOR_DEVICE_PATH *Vendor; 1273 1274 CONTROLLER_DEVICE_PATH *Controller; 1275 BMC_DEVICE_PATH *Bmc; 1276 ACPI_HID_DEVICE_PATH *Acpi; 1277 ACPI_EXTENDED_HID_DEVICE_PATH *ExtendedAcpi; 1278 ACPI_ADR_DEVICE_PATH *AcpiAdr; 1279 1280 ATAPI_DEVICE_PATH *Atapi; 1281 SCSI_DEVICE_PATH *Scsi; 1282 ISCSI_DEVICE_PATH *Iscsi; 1283 FIBRECHANNEL_DEVICE_PATH *FibreChannel; 1284 FIBRECHANNELEX_DEVICE_PATH *FibreChannelEx; 1285 1286 F1394_DEVICE_PATH *F1394; 1287 USB_DEVICE_PATH *Usb; 1288 SATA_DEVICE_PATH *Sata; 1289 USB_CLASS_DEVICE_PATH *UsbClass; 1290 USB_WWID_DEVICE_PATH *UsbWwid; 1291 DEVICE_LOGICAL_UNIT_DEVICE_PATH *LogicUnit; 1292 I2O_DEVICE_PATH *I2O; 1293 MAC_ADDR_DEVICE_PATH *MacAddr; 1294 IPv4_DEVICE_PATH *Ipv4; 1295 IPv6_DEVICE_PATH *Ipv6; 1296 VLAN_DEVICE_PATH *Vlan; 1297 INFINIBAND_DEVICE_PATH *InfiniBand; 1298 UART_DEVICE_PATH *Uart; 1299 UART_FLOW_CONTROL_DEVICE_PATH *UartFlowControl; 1300 SAS_DEVICE_PATH *Sas; 1301 SASEX_DEVICE_PATH *SasEx; 1302 NVME_NAMESPACE_DEVICE_PATH *NvmeNamespace; 1303 URI_DEVICE_PATH *Uri; 1304 BLUETOOTH_DEVICE_PATH *Bluetooth; 1305 WIFI_DEVICE_PATH *WiFi; 1306 UFS_DEVICE_PATH *Ufs; 1307 SD_DEVICE_PATH *Sd; 1308 EMMC_DEVICE_PATH *Emmc; 1309 HARDDRIVE_DEVICE_PATH *HardDrive; 1310 CDROM_DEVICE_PATH *CD; 1311 1312 FILEPATH_DEVICE_PATH *FilePath; 1313 MEDIA_PROTOCOL_DEVICE_PATH *MediaProtocol; 1314 1315 MEDIA_FW_VOL_DEVICE_PATH *FirmwareVolume; 1316 MEDIA_FW_VOL_FILEPATH_DEVICE_PATH *FirmwareFile; 1317 MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH *Offset; 1318 MEDIA_RAM_DISK_DEVICE_PATH *RamDisk; 1319 BBS_BBS_DEVICE_PATH *Bbs; 1320 UINT8 *Raw; 1321 } EFI_DEV_PATH_PTR; 1322 1323 #pragma pack() 1324 1325 #define END_DEVICE_PATH_TYPE 0x7f 1326 #define END_ENTIRE_DEVICE_PATH_SUBTYPE 0xFF 1327 #define END_INSTANCE_DEVICE_PATH_SUBTYPE 0x01 1328 1329 extern EFI_GUID gEfiDevicePathProtocolGuid; 1330 1331 #endif 1332