xref: /freebsd/sys/contrib/device-tree/src/riscv/kendryte/k210.dtsi (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com>
4 * Copyright (C) 2020 Western Digital Corporation or its affiliates.
5 */
6#include <dt-bindings/clock/k210-clk.h>
7
8/ {
9	/*
10	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
11	 * wide, and the upper half of all addresses is ignored.
12	 */
13	#address-cells = <1>;
14	#size-cells = <1>;
15	compatible = "kendryte,k210";
16
17	aliases {
18		serial0 = &uarths0;
19	};
20
21	/*
22	 * The K210 has an sv39 MMU following the priviledge specification v1.9.
23	 * Since this is a non-ratified draft specification, the kernel does not
24	 * support it and the K210 support enabled only for the !MMU case.
25	 * Be consistent with this by setting the CPUs MMU type to "none".
26	 */
27	cpus {
28		#address-cells = <1>;
29		#size-cells = <0>;
30		timebase-frequency = <7800000>;
31		cpu0: cpu@0 {
32			device_type = "cpu";
33			reg = <0>;
34			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
35			riscv,isa = "rv64imafdc";
36			mmu-type = "none";
37			i-cache-size = <0x8000>;
38			i-cache-block-size = <64>;
39			d-cache-size = <0x8000>;
40			d-cache-block-size = <64>;
41			clocks = <&sysctl K210_CLK_CPU>;
42			clock-frequency = <390000000>;
43			cpu0_intc: interrupt-controller {
44				#interrupt-cells = <1>;
45				interrupt-controller;
46				compatible = "riscv,cpu-intc";
47			};
48		};
49		cpu1: cpu@1 {
50			device_type = "cpu";
51			reg = <1>;
52			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
53			riscv,isa = "rv64imafdc";
54			mmu-type = "none";
55			i-cache-size = <0x8000>;
56			i-cache-block-size = <64>;
57			d-cache-size = <0x8000>;
58			d-cache-block-size = <64>;
59			clocks = <&sysctl K210_CLK_CPU>;
60			clock-frequency = <390000000>;
61			cpu1_intc: interrupt-controller {
62				#interrupt-cells = <1>;
63				interrupt-controller;
64				compatible = "riscv,cpu-intc";
65			};
66		};
67	};
68
69	sram: memory@80000000 {
70		device_type = "memory";
71		reg = <0x80000000 0x400000>,
72		      <0x80400000 0x200000>,
73		      <0x80600000 0x200000>;
74		reg-names = "sram0", "sram1", "aisram";
75	};
76
77	clocks {
78		in0: oscillator {
79			compatible = "fixed-clock";
80			#clock-cells = <0>;
81			clock-frequency = <26000000>;
82		};
83	};
84
85	soc {
86		#address-cells = <1>;
87		#size-cells = <1>;
88		compatible = "kendryte,k210-soc", "simple-bus";
89		ranges;
90		interrupt-parent = <&plic0>;
91
92		sysctl: sysctl@50440000 {
93			compatible = "kendryte,k210-sysctl", "simple-mfd";
94			reg = <0x50440000 0x1000>;
95			#clock-cells = <1>;
96		};
97
98		clint0: clint@2000000 {
99			#interrupt-cells = <1>;
100			compatible = "riscv,clint0";
101			reg = <0x2000000 0xC000>;
102			interrupts-extended =  <&cpu0_intc 3 &cpu0_intc 7
103						&cpu1_intc 3 &cpu1_intc 7>;
104			clocks = <&sysctl K210_CLK_ACLK>;
105		};
106
107		plic0: interrupt-controller@c000000 {
108			#interrupt-cells = <1>;
109			interrupt-controller;
110			compatible = "kendryte,k210-plic0", "riscv,plic0";
111			reg = <0xC000000 0x4000000>;
112			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>,
113					      <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>;
114			riscv,ndev = <65>;
115			riscv,max-priority = <7>;
116		};
117
118		uarths0: serial@38000000 {
119			compatible = "kendryte,k210-uarths", "sifive,uart0";
120			reg = <0x38000000 0x1000>;
121			interrupts = <33>;
122			clocks = <&sysctl K210_CLK_CPU>;
123		};
124	};
125};
126