xref: /freebsd/sys/contrib/device-tree/src/powerpc/tqm8560.dts (revision 7fdf597e96a02165cfe22ff357b857d5fa15ed8a)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * TQM 8560 Device Tree Source
4 *
5 * Copyright 2008 Freescale Semiconductor Inc.
6 * Copyright 2008 Wolfgang Grandegger <wg@grandegger.com>
7 */
8
9/dts-v1/;
10
11/include/ "fsl/e500v1_power_isa.dtsi"
12
13/ {
14	model = "tqc,tqm8560";
15	compatible = "tqc,tqm8560";
16	#address-cells = <1>;
17	#size-cells = <1>;
18
19	aliases {
20		ethernet0 = &enet0;
21		ethernet1 = &enet1;
22		ethernet2 = &enet2;
23		serial0 = &serial0;
24		serial1 = &serial1;
25		pci0 = &pci0;
26	};
27
28	cpus {
29		#address-cells = <1>;
30		#size-cells = <0>;
31
32		PowerPC,8560@0 {
33			device_type = "cpu";
34			reg = <0>;
35			d-cache-line-size = <32>;
36			i-cache-line-size = <32>;
37			d-cache-size = <32768>;
38			i-cache-size = <32768>;
39			timebase-frequency = <0>;
40			bus-frequency = <0>;
41			clock-frequency = <0>;
42			next-level-cache = <&L2>;
43		};
44	};
45
46	memory {
47		device_type = "memory";
48		reg = <0x00000000 0x10000000>;
49	};
50
51	soc@e0000000 {
52		#address-cells = <1>;
53		#size-cells = <1>;
54		device_type = "soc";
55		ranges = <0x0 0xe0000000 0x100000>;
56		bus-frequency = <0>;
57		compatible = "fsl,mpc8560-immr", "simple-bus";
58
59		ecm-law@0 {
60			compatible = "fsl,ecm-law";
61			reg = <0x0 0x1000>;
62			fsl,num-laws = <8>;
63		};
64
65		ecm@1000 {
66			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
67			reg = <0x1000 0x1000>;
68			interrupts = <17 2>;
69			interrupt-parent = <&mpic>;
70		};
71
72		memory-controller@2000 {
73			compatible = "fsl,mpc8540-memory-controller";
74			reg = <0x2000 0x1000>;
75			interrupt-parent = <&mpic>;
76			interrupts = <18 2>;
77		};
78
79		L2: l2-cache-controller@20000 {
80			compatible = "fsl,mpc8540-l2-cache-controller";
81			reg = <0x20000 0x1000>;
82			cache-line-size = <32>;
83			cache-size = <0x40000>;	// L2, 256K
84			interrupt-parent = <&mpic>;
85			interrupts = <16 2>;
86		};
87
88		i2c@3000 {
89			#address-cells = <1>;
90			#size-cells = <0>;
91			cell-index = <0>;
92			compatible = "fsl-i2c";
93			reg = <0x3000 0x100>;
94			interrupts = <43 2>;
95			interrupt-parent = <&mpic>;
96			dfsrr;
97
98			dtt@48 {
99				compatible = "national,lm75";
100				reg = <0x48>;
101			};
102
103			rtc@68 {
104				compatible = "dallas,ds1337";
105				reg = <0x68>;
106			};
107		};
108
109		dma@21300 {
110			#address-cells = <1>;
111			#size-cells = <1>;
112			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
113			reg = <0x21300 0x4>;
114			ranges = <0x0 0x21100 0x200>;
115			cell-index = <0>;
116			dma-channel@0 {
117				compatible = "fsl,mpc8560-dma-channel",
118						"fsl,eloplus-dma-channel";
119				reg = <0x0 0x80>;
120				cell-index = <0>;
121				interrupt-parent = <&mpic>;
122				interrupts = <20 2>;
123			};
124			dma-channel@80 {
125				compatible = "fsl,mpc8560-dma-channel",
126						"fsl,eloplus-dma-channel";
127				reg = <0x80 0x80>;
128				cell-index = <1>;
129				interrupt-parent = <&mpic>;
130				interrupts = <21 2>;
131			};
132			dma-channel@100 {
133				compatible = "fsl,mpc8560-dma-channel",
134						"fsl,eloplus-dma-channel";
135				reg = <0x100 0x80>;
136				cell-index = <2>;
137				interrupt-parent = <&mpic>;
138				interrupts = <22 2>;
139			};
140			dma-channel@180 {
141				compatible = "fsl,mpc8560-dma-channel",
142						"fsl,eloplus-dma-channel";
143				reg = <0x180 0x80>;
144				cell-index = <3>;
145				interrupt-parent = <&mpic>;
146				interrupts = <23 2>;
147			};
148		};
149
150		enet0: ethernet@24000 {
151			#address-cells = <1>;
152			#size-cells = <1>;
153			cell-index = <0>;
154			device_type = "network";
155			model = "TSEC";
156			compatible = "gianfar";
157			reg = <0x24000 0x1000>;
158			ranges = <0x0 0x24000 0x1000>;
159			local-mac-address = [ 00 00 00 00 00 00 ];
160			interrupts = <29 2 30 2 34 2>;
161			interrupt-parent = <&mpic>;
162			tbi-handle = <&tbi0>;
163			phy-handle = <&phy2>;
164
165			mdio@520 {
166				#address-cells = <1>;
167				#size-cells = <0>;
168				compatible = "fsl,gianfar-mdio";
169				reg = <0x520 0x20>;
170
171				phy1: ethernet-phy@1 {
172					interrupt-parent = <&mpic>;
173					interrupts = <8 1>;
174					reg = <1>;
175				};
176				phy2: ethernet-phy@2 {
177					interrupt-parent = <&mpic>;
178					interrupts = <8 1>;
179					reg = <2>;
180				};
181				phy3: ethernet-phy@3 {
182					interrupt-parent = <&mpic>;
183					interrupts = <8 1>;
184					reg = <3>;
185				};
186				tbi0: tbi-phy@11 {
187					reg = <0x11>;
188					device_type = "tbi-phy";
189				};
190			};
191		};
192
193		enet1: ethernet@25000 {
194			#address-cells = <1>;
195			#size-cells = <1>;
196			cell-index = <1>;
197			device_type = "network";
198			model = "TSEC";
199			compatible = "gianfar";
200			reg = <0x25000 0x1000>;
201			ranges = <0x0 0x25000 0x1000>;
202			local-mac-address = [ 00 00 00 00 00 00 ];
203			interrupts = <35 2 36 2 40 2>;
204			interrupt-parent = <&mpic>;
205			tbi-handle = <&tbi1>;
206			phy-handle = <&phy1>;
207
208			mdio@520 {
209				#address-cells = <1>;
210				#size-cells = <0>;
211				compatible = "fsl,gianfar-tbi";
212				reg = <0x520 0x20>;
213
214				tbi1: tbi-phy@11 {
215					reg = <0x11>;
216					device_type = "tbi-phy";
217				};
218			};
219		};
220
221		mpic: pic@40000 {
222			interrupt-controller;
223			#address-cells = <0>;
224			#interrupt-cells = <2>;
225			reg = <0x40000 0x40000>;
226			device_type = "open-pic";
227			compatible = "chrp,open-pic";
228		};
229
230		cpm@919c0 {
231			#address-cells = <1>;
232			#size-cells = <1>;
233			compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus";
234			reg = <0x919c0 0x30>;
235			ranges;
236
237			muram@80000 {
238				#address-cells = <1>;
239				#size-cells = <1>;
240				ranges = <0 0x80000 0x10000>;
241
242				data@0 {
243					compatible = "fsl,cpm-muram-data";
244					reg = <0 0x4000 0x9000 0x2000>;
245				};
246			};
247
248			brg@919f0 {
249				compatible = "fsl,mpc8560-brg",
250				             "fsl,cpm2-brg",
251				             "fsl,cpm-brg";
252				reg = <0x919f0 0x10 0x915f0 0x10>;
253				clock-frequency = <0>;
254			};
255
256			cpmpic: pic@90c00 {
257				interrupt-controller;
258				#address-cells = <0>;
259				#interrupt-cells = <2>;
260				interrupts = <46 2>;
261				interrupt-parent = <&mpic>;
262				reg = <0x90c00 0x80>;
263				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
264			};
265
266			serial0: serial@91a00 {
267				device_type = "serial";
268				compatible = "fsl,mpc8560-scc-uart",
269				             "fsl,cpm2-scc-uart";
270				reg = <0x91a00 0x20 0x88000 0x100>;
271				fsl,cpm-brg = <1>;
272				fsl,cpm-command = <0x800000>;
273				current-speed = <115200>;
274				interrupts = <40 8>;
275				interrupt-parent = <&cpmpic>;
276			};
277
278			serial1: serial@91a20 {
279				device_type = "serial";
280				compatible = "fsl,mpc8560-scc-uart",
281				             "fsl,cpm2-scc-uart";
282				reg = <0x91a20 0x20 0x88100 0x100>;
283				fsl,cpm-brg = <2>;
284				fsl,cpm-command = <0x4a00000>;
285				current-speed = <115200>;
286				interrupts = <41 8>;
287				interrupt-parent = <&cpmpic>;
288			};
289
290			enet2: ethernet@91340 {
291				device_type = "network";
292				compatible = "fsl,mpc8560-fcc-enet",
293				             "fsl,cpm2-fcc-enet";
294				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
295				local-mac-address = [ 00 00 00 00 00 00 ];
296				fsl,cpm-command = <0x1a400300>;
297				interrupts = <34 8>;
298				interrupt-parent = <&cpmpic>;
299				phy-handle = <&phy3>;
300			};
301		};
302	};
303
304	localbus@e0005000 {
305		compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus",
306			     "simple-bus";
307		#address-cells = <2>;
308		#size-cells = <1>;
309		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
310		interrupt-parent = <&mpic>;
311		interrupts = <19 2>;
312
313		ranges = <
314			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
315			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
316			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
317		>;
318
319		flash@1,0 {
320			#address-cells = <1>;
321			#size-cells = <1>;
322			compatible = "cfi-flash";
323			reg = <1 0x0 0x8000000>;
324			bank-width = <4>;
325			device-width = <1>;
326
327			partition@0 {
328				label = "kernel";
329				reg = <0x00000000 0x00200000>;
330			};
331			partition@200000 {
332				label = "root";
333				reg = <0x00200000 0x00300000>;
334			};
335			partition@500000 {
336				label = "user";
337				reg = <0x00500000 0x07a00000>;
338			};
339			partition@7f00000 {
340				label = "env1";
341				reg = <0x07f00000 0x00040000>;
342			};
343			partition@7f40000 {
344				label = "env2";
345				reg = <0x07f40000 0x00040000>;
346			};
347			partition@7f80000 {
348				label = "u-boot";
349				reg = <0x07f80000 0x00080000>;
350				read-only;
351			};
352		};
353
354		/* Note: CAN support needs be enabled in U-Boot */
355		can0@2,0 {
356			compatible = "intel,82527"; // Bosch CC770
357			reg = <2 0x0 0x100>;
358			interrupts = <4 1>;
359			interrupt-parent = <&mpic>;
360		};
361
362		can1@2,100 {
363			compatible = "intel,82527"; // Bosch CC770
364			reg = <2 0x100 0x100>;
365			interrupts = <4 1>;
366			interrupt-parent = <&mpic>;
367		};
368	};
369
370	pci0: pci@e0008000 {
371		#interrupt-cells = <1>;
372		#size-cells = <2>;
373		#address-cells = <3>;
374		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
375		device_type = "pci";
376		reg = <0xe0008000 0x1000>;
377		clock-frequency = <66666666>;
378		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
379		interrupt-map = <
380				/* IDSEL 28 */
381				 0xe000 0 0 1 &mpic 2 1
382				 0xe000 0 0 2 &mpic 3 1
383				 0xe000 0 0 3 &mpic 6 1
384				 0xe000 0 0 4 &mpic 5 1
385
386				/* IDSEL 11 */
387				 0x5800 0 0 1 &mpic 6 1
388				 0x5800 0 0 2 &mpic 5 1
389				 >;
390
391		interrupt-parent = <&mpic>;
392		interrupts = <24 2>;
393		bus-range = <0 0>;
394		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
395			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
396	};
397};
398