xref: /freebsd/sys/contrib/device-tree/src/powerpc/mpc8379_mds.dts (revision 06c3fb2749bda94cb5201f81ffdb8fa6c3161b2e)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC8379E MDS Device Tree Source
4 *
5 * Copyright 2007 Freescale Semiconductor Inc.
6 */
7
8/dts-v1/;
9
10/ {
11	model = "fsl,mpc8379emds";
12	compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
13	#address-cells = <1>;
14	#size-cells = <1>;
15
16	aliases {
17		ethernet0 = &enet0;
18		ethernet1 = &enet1;
19		serial0 = &serial0;
20		serial1 = &serial1;
21		pci0 = &pci0;
22	};
23
24	cpus {
25		#address-cells = <1>;
26		#size-cells = <0>;
27
28		PowerPC,8379@0 {
29			device_type = "cpu";
30			reg = <0x0>;
31			d-cache-line-size = <32>;
32			i-cache-line-size = <32>;
33			d-cache-size = <32768>;
34			i-cache-size = <32768>;
35			timebase-frequency = <0>;
36			bus-frequency = <0>;
37			clock-frequency = <0>;
38		};
39	};
40
41	memory {
42		device_type = "memory";
43		reg = <0x00000000 0x20000000>;	// 512MB at 0
44	};
45
46	localbus@e0005000 {
47		#address-cells = <2>;
48		#size-cells = <1>;
49		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
50		reg = <0xe0005000 0x1000>;
51		interrupts = <77 0x8>;
52		interrupt-parent = <&ipic>;
53
54		// booting from NOR flash
55		ranges = <0 0x0 0xfe000000 0x02000000
56		          1 0x0 0xf8000000 0x00008000
57		          3 0x0 0xe0600000 0x00008000>;
58
59		flash@0,0 {
60			#address-cells = <1>;
61			#size-cells = <1>;
62			compatible = "cfi-flash";
63			reg = <0 0x0 0x2000000>;
64			bank-width = <2>;
65			device-width = <1>;
66
67			u-boot@0 {
68				reg = <0x0 0x100000>;
69				read-only;
70			};
71
72			fs@100000 {
73				reg = <0x100000 0x800000>;
74			};
75
76			kernel@1d00000 {
77				reg = <0x1d00000 0x200000>;
78			};
79
80			dtb@1f00000 {
81				reg = <0x1f00000 0x100000>;
82			};
83		};
84
85		bcsr@1,0 {
86			reg = <1 0x0 0x8000>;
87			compatible = "fsl,mpc837xmds-bcsr";
88		};
89
90		nand@3,0 {
91			#address-cells = <1>;
92			#size-cells = <1>;
93			compatible = "fsl,mpc8379-fcm-nand",
94			             "fsl,elbc-fcm-nand";
95			reg = <3 0x0 0x8000>;
96
97			u-boot@0 {
98				reg = <0x0 0x100000>;
99				read-only;
100			};
101
102			kernel@100000 {
103				reg = <0x100000 0x300000>;
104			};
105
106			fs@400000 {
107				reg = <0x400000 0x1c00000>;
108			};
109		};
110	};
111
112	soc@e0000000 {
113		#address-cells = <1>;
114		#size-cells = <1>;
115		device_type = "soc";
116		compatible = "simple-bus";
117		ranges = <0x0 0xe0000000 0x00100000>;
118		reg = <0xe0000000 0x00000200>;
119		bus-frequency = <0>;
120
121		wdt@200 {
122			compatible = "mpc83xx_wdt";
123			reg = <0x200 0x100>;
124		};
125
126		sleep-nexus {
127			#address-cells = <1>;
128			#size-cells = <1>;
129			compatible = "simple-bus";
130			sleep = <&pmc 0x0c000000>;
131			ranges;
132
133			i2c@3000 {
134				#address-cells = <1>;
135				#size-cells = <0>;
136				cell-index = <0>;
137				compatible = "fsl-i2c";
138				reg = <0x3000 0x100>;
139				interrupts = <14 0x8>;
140				interrupt-parent = <&ipic>;
141				dfsrr;
142
143				rtc@68 {
144					compatible = "dallas,ds1374";
145					reg = <0x68>;
146					interrupts = <19 0x8>;
147					interrupt-parent = <&ipic>;
148				};
149			};
150
151			sdhci@2e000 {
152				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
153				reg = <0x2e000 0x1000>;
154				interrupts = <42 0x8>;
155				interrupt-parent = <&ipic>;
156				sdhci,wp-inverted;
157				/* Filled in by U-Boot */
158				clock-frequency = <0>;
159			};
160		};
161
162		i2c@3100 {
163			#address-cells = <1>;
164			#size-cells = <0>;
165			cell-index = <1>;
166			compatible = "fsl-i2c";
167			reg = <0x3100 0x100>;
168			interrupts = <15 0x8>;
169			interrupt-parent = <&ipic>;
170			dfsrr;
171		};
172
173		spi@7000 {
174			cell-index = <0>;
175			compatible = "fsl,spi";
176			reg = <0x7000 0x1000>;
177			interrupts = <16 0x8>;
178			interrupt-parent = <&ipic>;
179			mode = "cpu";
180		};
181
182		dma@82a8 {
183			#address-cells = <1>;
184			#size-cells = <1>;
185			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
186			reg = <0x82a8 4>;
187			ranges = <0 0x8100 0x1a8>;
188			interrupt-parent = <&ipic>;
189			interrupts = <71 8>;
190			cell-index = <0>;
191			dma-channel@0 {
192				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
193				reg = <0 0x80>;
194				cell-index = <0>;
195				interrupt-parent = <&ipic>;
196				interrupts = <71 8>;
197			};
198			dma-channel@80 {
199				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
200				reg = <0x80 0x80>;
201				cell-index = <1>;
202				interrupt-parent = <&ipic>;
203				interrupts = <71 8>;
204			};
205			dma-channel@100 {
206				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
207				reg = <0x100 0x80>;
208				cell-index = <2>;
209				interrupt-parent = <&ipic>;
210				interrupts = <71 8>;
211			};
212			dma-channel@180 {
213				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
214				reg = <0x180 0x28>;
215				cell-index = <3>;
216				interrupt-parent = <&ipic>;
217				interrupts = <71 8>;
218			};
219		};
220
221		usb@23000 {
222			compatible = "fsl-usb2-dr";
223			reg = <0x23000 0x1000>;
224			#address-cells = <1>;
225			#size-cells = <0>;
226			interrupt-parent = <&ipic>;
227			interrupts = <38 0x8>;
228			dr_mode = "host";
229			phy_type = "ulpi";
230			sleep = <&pmc 0x00c00000>;
231		};
232
233		enet0: ethernet@24000 {
234			#address-cells = <1>;
235			#size-cells = <1>;
236			cell-index = <0>;
237			device_type = "network";
238			model = "eTSEC";
239			compatible = "gianfar";
240			reg = <0x24000 0x1000>;
241			ranges = <0x0 0x24000 0x1000>;
242			local-mac-address = [ 00 00 00 00 00 00 ];
243			interrupts = <32 0x8 33 0x8 34 0x8>;
244			phy-connection-type = "mii";
245			interrupt-parent = <&ipic>;
246			tbi-handle = <&tbi0>;
247			phy-handle = <&phy2>;
248			sleep = <&pmc 0xc0000000>;
249			fsl,magic-packet;
250
251			mdio@520 {
252				#address-cells = <1>;
253				#size-cells = <0>;
254				compatible = "fsl,gianfar-mdio";
255				reg = <0x520 0x20>;
256
257				phy2: ethernet-phy@2 {
258					interrupt-parent = <&ipic>;
259					interrupts = <17 0x8>;
260					reg = <0x2>;
261				};
262
263				phy3: ethernet-phy@3 {
264					interrupt-parent = <&ipic>;
265					interrupts = <18 0x8>;
266					reg = <0x3>;
267				};
268
269				tbi0: tbi-phy@11 {
270					reg = <0x11>;
271					device_type = "tbi-phy";
272				};
273			};
274		};
275
276		enet1: ethernet@25000 {
277			#address-cells = <1>;
278			#size-cells = <1>;
279			cell-index = <1>;
280			device_type = "network";
281			model = "eTSEC";
282			compatible = "gianfar";
283			reg = <0x25000 0x1000>;
284			ranges = <0x0 0x25000 0x1000>;
285			local-mac-address = [ 00 00 00 00 00 00 ];
286			interrupts = <35 0x8 36 0x8 37 0x8>;
287			phy-connection-type = "mii";
288			interrupt-parent = <&ipic>;
289			tbi-handle = <&tbi1>;
290			phy-handle = <&phy3>;
291			sleep = <&pmc 0x30000000>;
292			fsl,magic-packet;
293
294			mdio@520 {
295				#address-cells = <1>;
296				#size-cells = <0>;
297				compatible = "fsl,gianfar-tbi";
298				reg = <0x520 0x20>;
299
300				tbi1: tbi-phy@11 {
301					reg = <0x11>;
302					device_type = "tbi-phy";
303				};
304			};
305		};
306
307		serial0: serial@4500 {
308			cell-index = <0>;
309			device_type = "serial";
310			compatible = "fsl,ns16550", "ns16550";
311			reg = <0x4500 0x100>;
312			clock-frequency = <0>;
313			interrupts = <9 0x8>;
314			interrupt-parent = <&ipic>;
315		};
316
317		serial1: serial@4600 {
318			cell-index = <1>;
319			device_type = "serial";
320			compatible = "fsl,ns16550", "ns16550";
321			reg = <0x4600 0x100>;
322			clock-frequency = <0>;
323			interrupts = <10 0x8>;
324			interrupt-parent = <&ipic>;
325		};
326
327		crypto@30000 {
328			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
329				     "fsl,sec2.1", "fsl,sec2.0";
330			reg = <0x30000 0x10000>;
331			interrupts = <11 0x8>;
332			interrupt-parent = <&ipic>;
333			fsl,num-channels = <4>;
334			fsl,channel-fifo-len = <24>;
335			fsl,exec-units-mask = <0x9fe>;
336			fsl,descriptor-types-mask = <0x3ab0ebf>;
337			sleep = <&pmc 0x03000000>;
338		};
339
340		sata@18000 {
341			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
342			reg = <0x18000 0x1000>;
343			interrupts = <44 0x8>;
344			interrupt-parent = <&ipic>;
345			sleep = <&pmc 0x000000c0>;
346		};
347
348		sata@19000 {
349			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
350			reg = <0x19000 0x1000>;
351			interrupts = <45 0x8>;
352			interrupt-parent = <&ipic>;
353			sleep = <&pmc 0x00000030>;
354		};
355
356		sata@1a000 {
357			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
358			reg = <0x1a000 0x1000>;
359			interrupts = <46 0x8>;
360			interrupt-parent = <&ipic>;
361			sleep = <&pmc 0x0000000c>;
362		};
363
364		sata@1b000 {
365			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
366			reg = <0x1b000 0x1000>;
367			interrupts = <47 0x8>;
368			interrupt-parent = <&ipic>;
369			sleep = <&pmc 0x00000003>;
370		};
371
372		/* IPIC
373		 * interrupts cell = <intr #, sense>
374		 * sense values match linux IORESOURCE_IRQ_* defines:
375		 * sense == 8: Level, low assertion
376		 * sense == 2: Edge, high-to-low change
377		 */
378		ipic: pic@700 {
379			compatible = "fsl,ipic";
380			interrupt-controller;
381			#address-cells = <0>;
382			#interrupt-cells = <2>;
383			reg = <0x700 0x100>;
384		};
385
386		pmc: power@b00 {
387			compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
388			reg = <0xb00 0x100 0xa00 0x100>;
389			interrupts = <80 0x8>;
390			interrupt-parent = <&ipic>;
391		};
392	};
393
394	pci0: pci@e0008500 {
395		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
396		interrupt-map = <
397
398				/* IDSEL 0x11 */
399				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
400				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
401				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
402				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
403
404				/* IDSEL 0x12 */
405				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
406				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
407				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
408				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
409
410				/* IDSEL 0x13 */
411				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
412				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
413				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
414				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
415
416				/* IDSEL 0x15 */
417				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
418				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
419				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
420				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
421
422				/* IDSEL 0x16 */
423				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
424				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
425				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
426				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
427
428				/* IDSEL 0x17 */
429				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
430				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
431				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
432				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
433
434				/* IDSEL 0x18 */
435				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
436				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
437				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
438				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
439		interrupt-parent = <&ipic>;
440		interrupts = <66 0x8>;
441		bus-range = <0x0 0x0>;
442		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
443		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
444		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
445		sleep = <&pmc 0x00010000>;
446		clock-frequency = <0>;
447		#interrupt-cells = <1>;
448		#size-cells = <2>;
449		#address-cells = <3>;
450		reg = <0xe0008500 0x100		/* internal registers */
451		       0xe0008300 0x8>;		/* config space access registers */
452		compatible = "fsl,mpc8349-pci";
453		device_type = "pci";
454	};
455};
456