xref: /freebsd/sys/contrib/device-tree/src/powerpc/mpc8272ads.dts (revision 59c8e88e72633afbc47a4ace0d2170d00d51f7dc)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC8272 ADS Device Tree Source
4 *
5 * Copyright 2005,2008 Freescale Semiconductor Inc.
6 */
7
8/dts-v1/;
9
10/ {
11	model = "MPC8272ADS";
12	compatible = "fsl,mpc8272ads";
13	#address-cells = <1>;
14	#size-cells = <1>;
15
16	aliases {
17		ethernet0 = &eth0;
18		ethernet1 = &eth1;
19		serial0 = &scc1;
20		serial1 = &scc4;
21	};
22
23	cpus {
24		#address-cells = <1>;
25		#size-cells = <0>;
26
27		PowerPC,8272@0 {
28			device_type = "cpu";
29			reg = <0x0>;
30			d-cache-line-size = <32>;
31			i-cache-line-size = <32>;
32			d-cache-size = <16384>;
33			i-cache-size = <16384>;
34			timebase-frequency = <0>;
35			bus-frequency = <0>;
36			clock-frequency = <0>;
37		};
38	};
39
40	memory {
41		device_type = "memory";
42		reg = <0x0 0x0>;
43	};
44
45	localbus@f0010100 {
46		compatible = "fsl,mpc8272-localbus",
47		             "fsl,pq2-localbus";
48		#address-cells = <2>;
49		#size-cells = <1>;
50		reg = <0xf0010100 0x40>;
51
52		ranges = <0x0 0x0 0xff800000 0x00800000
53		          0x1 0x0 0xf4500000 0x8000
54		          0x3 0x0 0xf8200000 0x8000>;
55
56		flash@0,0 {
57			compatible = "jedec-flash";
58			reg = <0x0 0x0 0x00800000>;
59			bank-width = <4>;
60			device-width = <1>;
61		};
62
63		board-control@1,0 {
64			reg = <0x1 0x0 0x20>;
65			compatible = "fsl,mpc8272ads-bcsr";
66		};
67
68		PCI_PIC: interrupt-controller@3,0 {
69			compatible = "fsl,mpc8272ads-pci-pic",
70			             "fsl,pq2ads-pci-pic";
71			#interrupt-cells = <1>;
72			interrupt-controller;
73			reg = <0x3 0x0 0x8>;
74			interrupt-parent = <&PIC>;
75			interrupts = <20 8>;
76		};
77	};
78
79
80	pci@f0010800 {
81		device_type = "pci";
82		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
83		compatible = "fsl,mpc8272-pci", "fsl,pq2-pci";
84		#interrupt-cells = <1>;
85		#size-cells = <2>;
86		#address-cells = <3>;
87		clock-frequency = <66666666>;
88		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
89		interrupt-map = <
90		                 /* IDSEL 0x16 */
91		                 0xb000 0x0 0x0 0x1 &PCI_PIC 0
92		                 0xb000 0x0 0x0 0x2 &PCI_PIC 1
93		                 0xb000 0x0 0x0 0x3 &PCI_PIC 2
94		                 0xb000 0x0 0x0 0x4 &PCI_PIC 3
95
96		                 /* IDSEL 0x17 */
97		                 0xb800 0x0 0x0 0x1 &PCI_PIC 4
98		                 0xb800 0x0 0x0 0x2 &PCI_PIC 5
99		                 0xb800 0x0 0x0 0x3 &PCI_PIC 6
100		                 0xb800 0x0 0x0 0x4 &PCI_PIC 7
101
102		                 /* IDSEL 0x18 */
103		                 0xc000 0x0 0x0 0x1 &PCI_PIC 8
104		                 0xc000 0x0 0x0 0x2 &PCI_PIC 9
105		                 0xc000 0x0 0x0 0x3 &PCI_PIC 10
106		                 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
107
108		interrupt-parent = <&PIC>;
109		interrupts = <18 8>;
110		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
111		          0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
112		          0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
113	};
114
115	soc@f0000000 {
116		#address-cells = <1>;
117		#size-cells = <1>;
118		device_type = "soc";
119		compatible = "fsl,mpc8272", "fsl,pq2-soc";
120		ranges = <0x0 0xf0000000 0x53000>;
121
122		// Temporary -- will go away once kernel uses ranges for get_immrbase().
123		reg = <0xf0000000 0x53000>;
124
125		cpm@119c0 {
126			#address-cells = <1>;
127			#size-cells = <1>;
128			compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
129			reg = <0x119c0 0x30>;
130			ranges;
131
132			muram@0 {
133				#address-cells = <1>;
134				#size-cells = <1>;
135				ranges = <0x0 0x0 0x10000>;
136
137				data@0 {
138					compatible = "fsl,cpm-muram-data";
139					reg = <0x0 0x2000 0x9800 0x800>;
140				};
141			};
142
143			brg@119f0 {
144				compatible = "fsl,mpc8272-brg",
145				             "fsl,cpm2-brg",
146				             "fsl,cpm-brg";
147				reg = <0x119f0 0x10 0x115f0 0x10>;
148			};
149
150			scc1: serial@11a00 {
151				device_type = "serial";
152				compatible = "fsl,mpc8272-scc-uart",
153				             "fsl,cpm2-scc-uart";
154				reg = <0x11a00 0x20 0x8000 0x100>;
155				interrupts = <40 8>;
156				interrupt-parent = <&PIC>;
157				fsl,cpm-brg = <1>;
158				fsl,cpm-command = <0x800000>;
159			};
160
161			scc4: serial@11a60 {
162				device_type = "serial";
163				compatible = "fsl,mpc8272-scc-uart",
164				             "fsl,cpm2-scc-uart";
165				reg = <0x11a60 0x20 0x8300 0x100>;
166				interrupts = <43 8>;
167				interrupt-parent = <&PIC>;
168				fsl,cpm-brg = <4>;
169				fsl,cpm-command = <0xce00000>;
170			};
171
172			usb@11b60 {
173				compatible = "fsl,mpc8272-cpm-usb";
174				reg = <0x11b60 0x40 0x8b00 0x100>;
175				interrupts = <11 8>;
176				interrupt-parent = <&PIC>;
177				mode = "peripheral";
178			};
179
180			mdio@10d40 {
181				compatible = "fsl,mpc8272ads-mdio-bitbang",
182				             "fsl,mpc8272-mdio-bitbang",
183				             "fsl,cpm2-mdio-bitbang";
184				reg = <0x10d40 0x14>;
185				#address-cells = <1>;
186				#size-cells = <0>;
187				fsl,mdio-pin = <18>;
188				fsl,mdc-pin = <19>;
189
190				PHY0: ethernet-phy@0 {
191					interrupt-parent = <&PIC>;
192					interrupts = <23 8>;
193					reg = <0x0>;
194				};
195
196				PHY1: ethernet-phy@1 {
197					interrupt-parent = <&PIC>;
198					interrupts = <23 8>;
199					reg = <0x3>;
200				};
201			};
202
203			eth0: ethernet@11300 {
204				device_type = "network";
205				compatible = "fsl,mpc8272-fcc-enet",
206				             "fsl,cpm2-fcc-enet";
207				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
208				local-mac-address = [ 00 00 00 00 00 00 ];
209				interrupts = <32 8>;
210				interrupt-parent = <&PIC>;
211				phy-handle = <&PHY0>;
212				linux,network-index = <0>;
213				fsl,cpm-command = <0x12000300>;
214			};
215
216			eth1: ethernet@11320 {
217				device_type = "network";
218				compatible = "fsl,mpc8272-fcc-enet",
219				             "fsl,cpm2-fcc-enet";
220				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
221				local-mac-address = [ 00 00 00 00 00 00 ];
222				interrupts = <33 8>;
223				interrupt-parent = <&PIC>;
224				phy-handle = <&PHY1>;
225				linux,network-index = <1>;
226				fsl,cpm-command = <0x16200300>;
227			};
228
229			i2c@11860 {
230				compatible = "fsl,mpc8272-i2c",
231					     "fsl,cpm2-i2c";
232				reg = <0x11860 0x20 0x8afc 0x2>;
233				interrupts = <1 8>;
234				interrupt-parent = <&PIC>;
235				fsl,cpm-command = <0x29600000>;
236				#address-cells = <1>;
237				#size-cells = <0>;
238			};
239		};
240
241		PIC: interrupt-controller@10c00 {
242			#interrupt-cells = <2>;
243			interrupt-controller;
244			reg = <0x10c00 0x80>;
245			compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
246		};
247
248		crypto@30000 {
249			compatible = "fsl,sec1.0";
250			reg = <0x40000 0x13000>;
251			interrupts = <47 0x8>;
252			interrupt-parent = <&PIC>;
253			fsl,num-channels = <4>;
254			fsl,channel-fifo-len = <24>;
255			fsl,exec-units-mask = <0x7e>;
256			fsl,descriptor-types-mask = <0x1010415>;
257		};
258	};
259
260	chosen {
261		stdout-path = "/soc/cpm/serial@11a00";
262	};
263};
264