1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * Freescale Media5200 board Device Tree Source 4 * 5 * Copyright 2009 Secret Lab Technologies Ltd. 6 * Grant Likely <grant.likely@secretlab.ca> 7 * Steven Cavanagh <scavanagh@secretlab.ca> 8 */ 9 10/include/ "mpc5200b.dtsi" 11 12&gpt0 { fsl,has-wdt; }; 13 14/ { 15 model = "fsl,media5200"; 16 compatible = "fsl,media5200"; 17 18 aliases { 19 console = &console; 20 ethernet0 = ð0; 21 }; 22 23 chosen { 24 stdout-path = &console; 25 }; 26 27 cpus { 28 PowerPC,5200@0 { 29 timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot 30 bus-frequency = <132000000>; // 132 MHz 31 clock-frequency = <396000000>; // 396 MHz 32 }; 33 }; 34 35 memory { 36 reg = <0x00000000 0x08000000>; // 128MB RAM 37 }; 38 39 soc5200@f0000000 { 40 bus-frequency = <132000000>;// 132 MHz 41 42 psc@2000 { // PSC1 43 status = "disabled"; 44 }; 45 46 psc@2200 { // PSC2 47 status = "disabled"; 48 }; 49 50 psc@2400 { // PSC3 51 status = "disabled"; 52 }; 53 54 psc@2600 { // PSC4 55 status = "disabled"; 56 }; 57 58 psc@2800 { // PSC5 59 status = "disabled"; 60 }; 61 62 // PSC6 in uart mode 63 console: psc@2c00 { // PSC6 64 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; 65 }; 66 67 ethernet@3000 { 68 phy-handle = <&phy0>; 69 }; 70 71 mdio@3000 { 72 phy0: ethernet-phy@0 { 73 reg = <0>; 74 }; 75 }; 76 77 usb@1000 { 78 reg = <0x1000 0x100>; 79 }; 80 }; 81 82 pci@f0000d00 { 83 interrupt-map-mask = <0xf800 0 0 7>; 84 interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot 85 0xc000 0 0 2 &media5200_fpga 0 3 86 0xc000 0 0 3 &media5200_fpga 0 4 87 0xc000 0 0 4 &media5200_fpga 0 5 88 89 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot 90 0xc800 0 0 2 &media5200_fpga 0 4 91 0xc800 0 0 3 &media5200_fpga 0 5 92 0xc800 0 0 4 &media5200_fpga 0 2 93 94 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI 95 0xd000 0 0 2 &media5200_fpga 0 5 96 97 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP 98 >; 99 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 100 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 101 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; 102 interrupt-parent = <&mpc5200_pic>; 103 }; 104 105 localbus { 106 ranges = < 0 0 0xfc000000 0x02000000 107 1 0 0xfe000000 0x02000000 108 2 0 0xf0010000 0x00010000 109 3 0 0xf0020000 0x00010000 >; 110 flash@0,0 { 111 compatible = "amd,am29lv28ml", "cfi-flash"; 112 reg = <0 0x0 0x2000000>; // 32 MB 113 bank-width = <4>; // Width in bytes of the flash bank 114 device-width = <2>; // Two devices on each bank 115 }; 116 117 flash@1,0 { 118 compatible = "amd,am29lv28ml", "cfi-flash"; 119 reg = <1 0 0x2000000>; // 32 MB 120 bank-width = <4>; // Width in bytes of the flash bank 121 device-width = <2>; // Two devices on each bank 122 }; 123 124 media5200_fpga: fpga@2,0 { 125 compatible = "fsl,media5200-fpga"; 126 interrupt-controller; 127 #interrupt-cells = <2>; // 0:bank 1:id; no type field 128 reg = <2 0 0x10000>; 129 130 interrupt-parent = <&mpc5200_pic>; 131 interrupts = <0 0 3 // IRQ bank 0 132 1 1 3>; // IRQ bank 1 133 }; 134 135 uart@3,0 { 136 compatible = "ti,tl16c752bpt"; 137 reg = <3 0 0x10000>; 138 interrupt-parent = <&media5200_fpga>; 139 interrupts = <0 0 0 1>; // 2 irqs 140 }; 141 }; 142}; 143