1/* 2 * Device Tree Souce for Buffalo KuroboxHD 3 * 4 * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use 5 * the default configuration linkstation_defconfig. 6 * 7 * Based on sandpoint.dts 8 * 9 * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> 10 * Copyright 2008 Freescale Semiconductor, Inc. 11 * 12 * This file is licensed under 13 * the terms of the GNU General Public License version 2. This program 14 * is licensed "as is" without any warranty of any kind, whether express 15 * or implied. 16 17XXXX add flash parts, rtc, ?? 18 19 */ 20 21/dts-v1/; 22 23/ { 24 model = "KuroboxHD"; 25 compatible = "linkstation"; 26 #address-cells = <1>; 27 #size-cells = <1>; 28 29 aliases { 30 serial0 = &serial0; 31 serial1 = &serial1; 32 pci0 = &pci0; 33 }; 34 35 cpus { 36 #address-cells = <1>; 37 #size-cells = <0>; 38 39 PowerPC,603e { /* Really 8241 */ 40 device_type = "cpu"; 41 reg = <0x0>; 42 clock-frequency = <200000000>; /* Fixed by bootloader */ 43 timebase-frequency = <24391680>; /* Fixed by bootloader */ 44 bus-frequency = <0>; /* Fixed by bootloader */ 45 /* Following required by dtc but not used */ 46 i-cache-size = <0x4000>; 47 d-cache-size = <0x4000>; 48 }; 49 }; 50 51 memory { 52 device_type = "memory"; 53 reg = <0x0 0x4000000>; 54 }; 55 56 soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ 57 #address-cells = <1>; 58 #size-cells = <1>; 59 device_type = "soc"; 60 compatible = "mpc10x"; 61 store-gathering = <0>; /* 0 == off, !0 == on */ 62 reg = <0x80000000 0x100000>; 63 ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ 64 0xfc000000 0xfc000000 0x100000 /* EUMB */ 65 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ 66 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ 67 0xfef00000 0xfef00000 0x100000>; /* pci iack */ 68 69 i2c@80003000 { 70 #address-cells = <1>; 71 #size-cells = <0>; 72 cell-index = <0>; 73 compatible = "fsl-i2c"; 74 reg = <0x80003000 0x1000>; 75 interrupts = <5 2>; 76 interrupt-parent = <&mpic>; 77 78 rtc@32 { 79 compatible = "ricoh,rs5c372a"; 80 reg = <0x32>; 81 }; 82 }; 83 84 serial0: serial@80004500 { 85 cell-index = <0>; 86 device_type = "serial"; 87 compatible = "fsl,ns16550", "ns16550"; 88 reg = <0x80004500 0x8>; 89 clock-frequency = <97553800>; 90 current-speed = <9600>; 91 interrupts = <9 0>; 92 interrupt-parent = <&mpic>; 93 }; 94 95 serial1: serial@80004600 { 96 cell-index = <1>; 97 device_type = "serial"; 98 compatible = "fsl,ns16550", "ns16550"; 99 reg = <0x80004600 0x8>; 100 clock-frequency = <97553800>; 101 current-speed = <57600>; 102 interrupts = <10 0>; 103 interrupt-parent = <&mpic>; 104 }; 105 106 mpic: interrupt-controller@80040000 { 107 #interrupt-cells = <2>; 108 #address-cells = <0>; 109 device_type = "open-pic"; 110 compatible = "chrp,open-pic"; 111 interrupt-controller; 112 reg = <0x80040000 0x40000>; 113 }; 114 115 pci0: pci@fec00000 { 116 #address-cells = <3>; 117 #size-cells = <2>; 118 #interrupt-cells = <1>; 119 device_type = "pci"; 120 compatible = "mpc10x-pci"; 121 reg = <0xfec00000 0x400000>; 122 ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 123 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; 124 bus-range = <0 255>; 125 clock-frequency = <133333333>; 126 interrupt-parent = <&mpic>; 127 interrupt-map-mask = <0xf800 0x0 0x0 0x7>; 128 interrupt-map = < 129 /* IDSEL 11 - IRQ0 ETH */ 130 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 131 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 132 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 133 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 134 /* IDSEL 12 - IRQ1 IDE0 */ 135 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 136 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 137 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 138 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 139 /* IDSEL 14 - IRQ3 USB2.0 */ 140 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 141 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 142 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 143 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 144 >; 145 }; 146 }; 147}; 148