xref: /freebsd/sys/contrib/device-tree/src/powerpc/kmeter1.dts (revision 5f4c09dd85bff675e0ca63c55ea3c517e0fddfcc)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Keymile KMETER1 Device Tree Source
4 *
5 * 2008-2011 DENX Software Engineering GmbH
6 */
7
8/dts-v1/;
9
10/ {
11	model = "KMETER1";
12	compatible = "keymile,KMETER1";
13	#address-cells = <1>;
14	#size-cells = <1>;
15
16	aliases {
17		ethernet0 = &enet_piggy2;
18		ethernet1 = &enet_estar1;
19		ethernet2 = &enet_estar2;
20		ethernet3 = &enet_eth1;
21		ethernet4 = &enet_eth2;
22		ethernet5 = &enet_eth3;
23		ethernet6 = &enet_eth4;
24		serial0 = &serial0;
25	};
26
27	cpus {
28		#address-cells = <1>;
29		#size-cells = <0>;
30
31		PowerPC,8360@0 {
32			device_type = "cpu";
33			reg = <0x0>;
34			d-cache-line-size = <32>;	// 32 bytes
35			i-cache-line-size = <32>;	// 32 bytes
36			d-cache-size = <32768>;		// L1, 32K
37			i-cache-size = <32768>;		// L1, 32K
38			timebase-frequency = <0>;	/* Filled in by U-Boot */
39			bus-frequency = <0>;	/* Filled in by U-Boot */
40			clock-frequency = <0>;	/* Filled in by U-Boot */
41		};
42	};
43
44	memory {
45		device_type = "memory";
46		reg = <0 0>;	/* Filled in by U-Boot */
47	};
48
49	soc8360@e0000000 {
50		#address-cells = <1>;
51		#size-cells = <1>;
52		device_type = "soc";
53		compatible = "fsl,mpc8360-immr", "simple-bus";
54		ranges = <0x0 0xe0000000 0x00200000>;
55		reg = <0xe0000000 0x00000200>;
56		bus-frequency = <0>;	/* Filled in by U-Boot */
57
58		pmc: power@b00 {
59			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
60			reg = <0xb00 0x100 0xa00 0x100>;
61			interrupts = <80 0x8>;
62			interrupt-parent = <&ipic>;
63		};
64
65		i2c@3000 {
66			#address-cells = <1>;
67			#size-cells = <0>;
68			cell-index = <0>;
69			compatible = "fsl,mpc8313-i2c","fsl-i2c";
70			reg = <0x3000 0x100>;
71			interrupts = <14 0x8>;
72			interrupt-parent = <&ipic>;
73			clock-frequency = <400000>;
74		};
75
76		serial0: serial@4500 {
77			cell-index = <0>;
78			device_type = "serial";
79			compatible = "fsl,ns16550", "ns16550";
80			reg = <0x4500 0x100>;
81			clock-frequency = <264000000>;
82			interrupts = <9 0x8>;
83			interrupt-parent = <&ipic>;
84		};
85
86		dma@82a8 {
87			#address-cells = <1>;
88			#size-cells = <1>;
89			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
90			reg = <0x82a8 4>;
91			ranges = <0 0x8100 0x1a8>;
92			interrupt-parent = <&ipic>;
93			interrupts = <71 8>;
94			cell-index = <0>;
95			dma-channel@0 {
96				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
97				reg = <0 0x80>;
98				interrupt-parent = <&ipic>;
99				interrupts = <71 8>;
100			};
101			dma-channel@80 {
102				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
103				reg = <0x80 0x80>;
104				interrupt-parent = <&ipic>;
105				interrupts = <71 8>;
106			};
107			dma-channel@100 {
108				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
109				reg = <0x100 0x80>;
110				interrupt-parent = <&ipic>;
111				interrupts = <71 8>;
112			};
113			dma-channel@180 {
114				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
115				reg = <0x180 0x28>;
116				interrupt-parent = <&ipic>;
117				interrupts = <71 8>;
118			};
119		};
120
121		ipic: pic@700 {
122			#address-cells = <0>;
123			#interrupt-cells = <2>;
124			compatible = "fsl,pq2pro-pic", "fsl,ipic";
125			interrupt-controller;
126			reg = <0x700 0x100>;
127		};
128
129		par_io@1400 {
130			#address-cells = <1>;
131			#size-cells = <0>;
132			reg = <0x1400 0x100>;
133			compatible = "fsl,mpc8360-par_io";
134			num-ports = <7>;
135
136			qe_pio_c: gpio-controller@30 {
137				#gpio-cells = <2>;
138				compatible = "fsl,mpc8360-qe-pario-bank",
139					     "fsl,mpc8323-qe-pario-bank";
140				reg = <0x1430 0x18>;
141				gpio-controller;
142			};
143			pio_ucc1: ucc_pin@0 {
144				reg = <0>;
145
146				pio-map = <
147					/* port pin dir open_drain assignment has_irq */
148					0   1  3  0  2  0	/* MDIO   */
149					0   2  1  0  1  0	/* MDC    */
150
151					0   3  1  0  1  0	/* TxD0   */
152					0   4  1  0  1  0	/* TxD1   */
153					0   5  1  0  1  0	/* TxD2   */
154					0   6  1  0  1  0	/* TxD3   */
155					0   9  2  0  1  0	/* RxD0   */
156					0  10  2  0  1  0	/* RxD1   */
157					0  11  2  0  1  0	/* RxD2   */
158					0  12  2  0  1  0	/* RxD3   */
159					0   7  1  0  1  0	/* TX_EN  */
160					0   8  1  0  1  0	/* TX_ER  */
161					0  15  2  0  1  0	/* RX_DV  */
162					0  16  2  0  1  0	/* RX_ER  */
163					0   0  2  0  1  0	/* RX_CLK */
164					2   9  1  0  3  0	/* GTX_CLK - CLK10 */
165					2   8  2  0  1  0	/* GTX125  - CLK9  */
166				>;
167			};
168
169			pio_ucc2: ucc_pin@1 {
170				reg = <1>;
171
172				pio-map = <
173					/* port pin dir open_drain assignment has_irq */
174					0   1  3  0  2  0	/* MDIO   */
175					0   2  1  0  1  0	/* MDC    */
176
177					0  17  1  0  1  0	/* TxD0   */
178					0  18  1  0  1  0	/* TxD1   */
179					0  19  1  0  1  0	/* TxD2   */
180					0  20  1  0  1  0	/* TxD3   */
181					0  23  2  0  1  0	/* RxD0   */
182					0  24  2  0  1  0	/* RxD1   */
183					0  25  2  0  1  0	/* RxD2   */
184					0  26  2  0  1  0	/* RxD3   */
185					0  21  1  0  1  0	/* TX_EN  */
186					0  22  1  0  1  0	/* TX_ER  */
187					0  29  2  0  1  0	/* RX_DV  */
188					0  30  2  0  1  0	/* RX_ER  */
189					0  31  2  0  1  0	/* RX_CLK */
190					2  2   1  0  2  0	/* GTX_CLK - CLK3  */
191					2  3   2  0  1  0	/* GTX125  - CLK4  */
192				>;
193			};
194
195			pio_ucc4: ucc_pin@3 {
196				reg = <3>;
197
198				pio-map = <
199					/* port pin dir open_drain assignment has_irq */
200					0   1  3  0  2  0	/* MDIO */
201					0   2  1  0  1  0	/* MDC  */
202
203					1  14  1  0  1  0	/* TxD0   (PB14, out, f1) */
204					1  15  1  0  1  0	/* TxD1   (PB15, out, f1) */
205					1  20  2  0  1  0	/* RxD0   (PB20, in,  f1) */
206					1  21  2  0  1  0	/* RxD1   (PB21, in,  f1) */
207					1  18  1  0  1  0	/* TX_EN  (PB18, out, f1) */
208					1  26  2  0  1  0	/* RX_DV  (PB26, in,  f1) */
209					1  27  2  0  1  0	/* RX_ER  (PB27, in,  f1) */
210
211					2  16  2  0  1  0	/* UCC4_RMII_CLK (CLK17) */
212				>;
213			};
214
215			pio_ucc5: ucc_pin@4 {
216				reg = <4>;
217
218				pio-map = <
219					/* port pin dir open_drain assignment has_irq */
220					0   1  3  0  2  0	/* MDIO */
221					0   2  1  0  1  0	/* MDC  */
222
223					3   0  1  0  1  0	/* TxD0  (PD0,  out, f1) */
224					3   1  1  0  1  0	/* TxD1  (PD1,  out, f1) */
225					3   6  2  0  1  0	/* RxD0  (PD6,   in, f1) */
226					3   7  2  0  1  0	/* RxD1  (PD7,   in, f1) */
227					3   4  1  0  1  0	/* TX_EN (PD4,  out, f1) */
228					3  12  2  0  1  0	/* RX_DV (PD12,  in, f1) */
229					3  13  2  0  1  0	/* RX_ER (PD13,  in, f1) */
230				>;
231			};
232
233			pio_ucc6: ucc_pin@5 {
234				reg = <5>;
235
236				pio-map = <
237					/* port pin dir open_drain assignment has_irq */
238					0   1  3  0  2  0	/* MDIO */
239					0   2  1  0  1  0	/* MDC  */
240
241					3  14  1  0  1  0	/* TxD0   (PD14, out, f1) */
242					3  15  1  0  1  0	/* TxD1   (PD15, out, f1) */
243					3  20  2  0  1  0	/* RxD0   (PD20, in,  f1) */
244					3  21  2  0  1  0	/* RxD1   (PD21, in,  f1) */
245					3  18  1  0  1  0	/* TX_EN  (PD18, out, f1) */
246					3  26  2  0  1  0	/* RX_DV  (PD26, in,  f1) */
247					3  27  2  0  1  0	/* RX_ER  (PD27, in,  f1) */
248				>;
249			};
250
251			pio_ucc7: ucc_pin@6 {
252				reg = <6>;
253
254				pio-map = <
255					/* port pin dir open_drain assignment has_irq */
256					0   1  3  0  2  0	/* MDIO */
257					0   2  1  0  1  0	/* MDC  */
258
259					4   0  1  0  1  0	/* TxD0   (PE0,  out, f1) */
260					4   1  1  0  1  0	/* TxD1   (PE1,  out, f1) */
261					4   6  2  0  1  0	/* RxD0   (PE6,   in, f1) */
262					4   7  2  0  1  0	/* RxD1   (PE7,   in, f1) */
263					4   4  1  0  1  0	/* TX_EN  (PE4,  out, f1) */
264					4  12  2  0  1  0	/* RX_DV  (PE12,  in, f1) */
265					4  13  2  0  1  0	/* RX_ER  (PE13,  in, f1) */
266				>;
267			};
268
269			pio_ucc8: ucc_pin@7 {
270				reg = <7>;
271
272				pio-map = <
273					/* port pin dir open_drain assignment has_irq */
274					0   1  3  0  2  0	/* MDIO */
275					0   2  1  0  1  0	/* MDC  */
276
277					4  14  1  0  2  0	/* TxD0   (PE14, out, f2) */
278					4  15  1  0  1  0	/* TxD1   (PE15, out, f1) */
279					4  20  2  0  1  0	/* RxD0   (PE20, in,  f1) */
280					4  21  2  0  1  0	/* RxD1   (PE21, in,  f1) */
281					4  18  1  0  1  0	/* TX_EN  (PE18, out, f1) */
282					4  26  2  0  1  0	/* RX_DV  (PE26, in,  f1) */
283					4  27  2  0  1  0	/* RX_ER  (PE27, in,  f1) */
284
285					2  15  2  0  1  0	/* UCCx_RMII_CLK (CLK16) */
286				>;
287			};
288
289		};
290
291		qe@100000 {
292			#address-cells = <1>;
293			#size-cells = <1>;
294			compatible = "fsl,qe";
295			ranges = <0x0 0x100000 0x100000>;
296			reg = <0x100000 0x480>;
297			clock-frequency = <0>;	/* Filled in by U-Boot */
298			brg-frequency = <0>;	/* Filled in by U-Boot */
299			bus-frequency = <0>;	/* Filled in by U-Boot */
300
301			muram@10000 {
302				#address-cells = <1>;
303				#size-cells = <1>;
304				compatible = "fsl,qe-muram", "fsl,cpm-muram";
305				ranges = <0x0 0x00010000 0x0000c000>;
306
307				data-only@0 {
308					compatible = "fsl,qe-muram-data",
309						     "fsl,cpm-muram-data";
310					reg = <0x0 0xc000>;
311				};
312			};
313
314			/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
315			enet_estar1: ucc@2000 {
316				device_type = "network";
317				compatible = "ucc_geth";
318				cell-index = <1>;
319				reg = <0x2000 0x200>;
320				interrupts = <32>;
321				interrupt-parent = <&qeic>;
322				local-mac-address = [ 00 00 00 00 00 00 ];
323				rx-clock-name = "none";
324				tx-clock-name = "clk9";
325				phy-handle = <&phy_estar1>;
326				phy-connection-type = "rgmii-id";
327				pio-handle = <&pio_ucc1>;
328			};
329
330			/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
331			enet_estar2: ucc@3000 {
332				device_type = "network";
333				compatible = "ucc_geth";
334				cell-index = <2>;
335				reg = <0x3000 0x200>;
336				interrupts = <33>;
337				interrupt-parent = <&qeic>;
338				local-mac-address = [ 00 00 00 00 00 00 ];
339				rx-clock-name = "none";
340				tx-clock-name = "clk4";
341				phy-handle = <&phy_estar2>;
342				phy-connection-type = "rgmii-id";
343				pio-handle = <&pio_ucc2>;
344			};
345
346			/* Piggy2 (UCC4, MDIO 0x00, RMII) */
347			enet_piggy2: ucc@3200 {
348				device_type = "network";
349				compatible = "ucc_geth";
350				cell-index = <4>;
351				reg = <0x3200 0x200>;
352				interrupts = <35>;
353				interrupt-parent = <&qeic>;
354				local-mac-address = [ 00 00 00 00 00 00 ];
355				rx-clock-name = "none";
356				tx-clock-name = "clk17";
357				phy-handle = <&phy_piggy2>;
358				phy-connection-type = "rmii";
359				pio-handle = <&pio_ucc4>;
360			};
361
362			/* Eth-1 (UCC5, MDIO 0x08, RMII) */
363			enet_eth1: ucc@2400 {
364				device_type = "network";
365				compatible = "ucc_geth";
366				cell-index = <5>;
367				reg = <0x2400 0x200>;
368				interrupts = <40>;
369				interrupt-parent = <&qeic>;
370				local-mac-address = [ 00 00 00 00 00 00 ];
371				rx-clock-name = "none";
372				tx-clock-name = "clk16";
373				phy-handle = <&phy_eth1>;
374				phy-connection-type = "rmii";
375				pio-handle = <&pio_ucc5>;
376			};
377
378			/* Eth-2 (UCC6, MDIO 0x09, RMII) */
379			enet_eth2: ucc@3400 {
380				device_type = "network";
381				compatible = "ucc_geth";
382				cell-index = <6>;
383				reg = <0x3400 0x200>;
384				interrupts = <41>;
385				interrupt-parent = <&qeic>;
386				local-mac-address = [ 00 00 00 00 00 00 ];
387				rx-clock-name = "none";
388				tx-clock-name = "clk16";
389				phy-handle = <&phy_eth2>;
390				phy-connection-type = "rmii";
391				pio-handle = <&pio_ucc6>;
392			};
393
394			/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
395			enet_eth3: ucc@2600 {
396				device_type = "network";
397				compatible = "ucc_geth";
398				cell-index = <7>;
399				reg = <0x2600 0x200>;
400				interrupts = <42>;
401				interrupt-parent = <&qeic>;
402				local-mac-address = [ 00 00 00 00 00 00 ];
403				rx-clock-name = "none";
404				tx-clock-name = "clk16";
405				phy-handle = <&phy_eth3>;
406				phy-connection-type = "rmii";
407				pio-handle = <&pio_ucc7>;
408			};
409
410			/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
411			enet_eth4: ucc@3600 {
412				device_type = "network";
413				compatible = "ucc_geth";
414				cell-index = <8>;
415				reg = <0x3600 0x200>;
416				interrupts = <43>;
417				interrupt-parent = <&qeic>;
418				local-mac-address = [ 00 00 00 00 00 00 ];
419				rx-clock-name = "none";
420				tx-clock-name = "clk16";
421				phy-handle = <&phy_eth4>;
422				phy-connection-type = "rmii";
423				pio-handle = <&pio_ucc8>;
424			};
425
426			mdio@3320 {
427				#address-cells = <1>;
428				#size-cells = <0>;
429				reg = <0x3320 0x18>;
430				compatible = "fsl,ucc-mdio";
431
432				/* Piggy2 (UCC4, MDIO 0x00, RMII) */
433				phy_piggy2: ethernet-phy@0 {
434					reg = <0x0>;
435				};
436
437				/* Eth-1 (UCC5, MDIO 0x08, RMII) */
438				phy_eth1: ethernet-phy@8 {
439					reg = <0x08>;
440				};
441
442				/* Eth-2 (UCC6, MDIO 0x09, RMII) */
443				phy_eth2: ethernet-phy@9 {
444					reg = <0x09>;
445				};
446
447				/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
448				phy_eth3: ethernet-phy@a {
449					reg = <0x0a>;
450				};
451
452				/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
453				phy_eth4: ethernet-phy@b {
454					reg = <0x0b>;
455				};
456
457				/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
458				phy_estar1: ethernet-phy@10 {
459					interrupt-parent = <&ipic>;
460					interrupts = <17 0x8>;
461					reg = <0x10>;
462				};
463
464				/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
465				phy_estar2: ethernet-phy@11 {
466					interrupt-parent = <&ipic>;
467					interrupts = <18 0x8>;
468					reg = <0x11>;
469				};
470			};
471
472			qeic: interrupt-controller@80 {
473				interrupt-controller;
474				compatible = "fsl,qe-ic";
475				#address-cells = <0>;
476				#interrupt-cells = <1>;
477				reg = <0x80 0x80>;
478				big-endian;
479				interrupts = <
480					32 0x8
481					33 0x8
482					34 0x8
483					35 0x8
484					40 0x8
485					41 0x8
486					42 0x8
487					43 0x8
488				>;
489				interrupt-parent = <&ipic>;
490			};
491		};
492	};
493
494	localbus@e0005000 {
495		#address-cells = <2>;
496		#size-cells = <1>;
497		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
498			     "simple-bus";
499		reg = <0xe0005000 0xd8>;
500		ranges = <0 0 0xf0000000 0x04000000	/* LB 0 */
501			  1 0 0xe8000000 0x01000000	/* LB 1 */
502			  3 0 0xa0000000 0x10000000>;	/* LB 3 */
503
504		flash@0,0 {
505			compatible = "cfi-flash";
506			reg = <0 0 0x04000000>;
507			#address-cells = <1>;
508			#size-cells = <1>;
509			bank-width = <2>;
510			partition@0 { /* 768KB */
511				label = "u-boot";
512				reg = <0 0xC0000>;
513			};
514			partition@c0000 { /* 128KB */
515				label = "env";
516				reg = <0xC0000 0x20000>;
517			};
518			partition@e0000 { /* 128KB */
519				label = "envred";
520				reg = <0xE0000 0x20000>;
521			};
522			partition@100000 { /* 64512KB */
523				label = "ubi0";
524				reg = <0x100000 0x3F00000>;
525			};
526		};
527	};
528};
529