xref: /freebsd/sys/contrib/device-tree/src/powerpc/fsl/t4240qds.dts (revision 02e9120893770924227138ba49df1edb3896112a)
1/*
2 * T4240QDS Device Tree Source
3 *
4 * Copyright 2012 - 2015 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/include/ "t4240si-pre.dtsi"
36
37/ {
38	model = "fsl,T4240QDS";
39	compatible = "fsl,T4240QDS";
40	#address-cells = <2>;
41	#size-cells = <2>;
42	interrupt-parent = <&mpic>;
43
44	aliases{
45		phy_rgmii1 = &phyrgmii1;
46		phy_rgmii2 = &phyrgmii2;
47		phy_sgmii3 = &phy3;
48		phy_sgmii4 = &phy4;
49		phy_sgmii11 = &phy11;
50		phy_sgmii12 = &phy12;
51		sgmii_phy11 = &sgmiiphy11;
52		sgmii_phy12 = &sgmiiphy12;
53		sgmii_phy13 = &sgmiiphy13;
54		sgmii_phy14 = &sgmiiphy14;
55		sgmii_phy21 = &sgmiiphy21;
56		sgmii_phy22 = &sgmiiphy22;
57		sgmii_phy23 = &sgmiiphy23;
58		sgmii_phy24 = &sgmiiphy24;
59		sgmii_phy31 = &sgmiiphy31;
60		sgmii_phy32 = &sgmiiphy32;
61		sgmii_phy33 = &sgmiiphy33;
62		sgmii_phy34 = &sgmiiphy34;
63		sgmii_phy41 = &sgmiiphy41;
64		sgmii_phy42 = &sgmiiphy42;
65		sgmii_phy43 = &sgmiiphy43;
66		sgmii_phy44 = &sgmiiphy44;
67		phy_xfi1 = &xfiphy1;
68		phy_xfi2 = &xfiphy2;
69		phy_xfi3 = &xfiphy3;
70		phy_xfi4 = &xfiphy4;
71		xfi_pcs_mdio1 = &xfimdio0;
72		xfi_pcs_mdio2 = &xfimdio1;
73		xfi_pcs_mdio3 = &xfimdio2;
74		xfi_pcs_mdio4 = &xfimdio3;
75		emi1_rgmii = &t4240mdio0;
76		emi1_slot1 = &t4240mdio1;
77		emi1_slot2 = &t4240mdio2;
78		emi1_slot3 = &t4240mdio3;
79		emi1_slot4 = &t4240mdio4;
80	};
81
82	ifc: localbus@ffe124000 {
83		reg = <0xf 0xfe124000 0 0x2000>;
84		ranges = <0 0 0xf 0xe8000000 0x08000000
85			  2 0 0xf 0xff800000 0x00010000
86			  3 0 0xf 0xffdf0000 0x00008000>;
87
88		nor@0,0 {
89			#address-cells = <1>;
90			#size-cells = <1>;
91			compatible = "cfi-flash";
92			reg = <0x0 0x0 0x8000000>;
93
94			bank-width = <2>;
95			device-width = <1>;
96		};
97
98		nand@2,0 {
99			#address-cells = <1>;
100			#size-cells = <1>;
101			compatible = "fsl,ifc-nand";
102			reg = <0x2 0x0 0x10000>;
103
104			partition@0 {
105				/* This location must not be altered  */
106				/* 1MB for u-boot Bootloader Image */
107				reg = <0x0 0x00100000>;
108				label = "NAND U-Boot Image";
109				read-only;
110			};
111
112			partition@100000 {
113				/* 1MB for DTB Image */
114				reg = <0x00100000 0x00100000>;
115				label = "NAND DTB Image";
116			};
117
118			partition@200000 {
119				/* 10MB for Linux Kernel Image */
120				reg = <0x00200000 0x00A00000>;
121				label = "NAND Linux Kernel Image";
122			};
123
124			partition@C00000 {
125				/* 500MB for Root file System Image */
126				reg = <0x00c00000 0x1F400000>;
127				label = "NAND RFS Image";
128			};
129		};
130
131		board-control@3,0 {
132			#address-cells = <1>;
133			#size-cells = <1>;
134			compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis";
135			reg = <3 0 0x300>;
136			ranges = <0 3 0 0x300>;
137
138			mdio-mux-emi1 {
139				#address-cells = <1>;
140				#size-cells = <0>;
141				compatible = "mdio-mux-mmioreg", "mdio-mux";
142				mdio-parent-bus = <&mdio1>;
143				reg = <0x54 1>;
144				mux-mask = <0xe0>;
145
146				t4240mdio0: mdio@0 {
147					#address-cells = <1>;
148					#size-cells = <0>;
149					reg = <0>;
150
151					phyrgmii1: ethernet-phy@1 {
152						reg = <0x1>;
153					};
154
155					phyrgmii2: ethernet-phy@2 {
156						reg = <0x2>;
157					};
158				};
159
160				t4240mdio1: mdio@20 {
161					#address-cells = <1>;
162					#size-cells = <0>;
163					reg = <0x20>;
164					status = "disabled";
165
166					phy1: ethernet-phy@0 {
167						reg = <0x0>;
168					};
169
170					phy2: ethernet-phy@1 {
171						reg = <0x1>;
172					};
173
174					phy3: ethernet-phy@2 {
175						reg = <0x2>;
176					};
177
178					phy4: ethernet-phy@3 {
179						reg = <0x3>;
180					};
181
182					sgmiiphy11: ethernet-phy@1c {
183						reg = <0x1c>;
184					};
185
186					sgmiiphy12: ethernet-phy@1d {
187						reg = <0x1d>;
188					};
189
190					sgmiiphy13: ethernet-phy@1e {
191						reg = <0x1e>;
192					};
193
194					sgmiiphy14: ethernet-phy@1f {
195						reg = <0x1f>;
196					};
197				};
198
199				t4240mdio2: mdio@40 {
200					#address-cells = <1>;
201					#size-cells = <0>;
202					reg = <0x40>;
203					status = "disabled";
204
205					phy5: ethernet-phy@4 {
206						reg = <0x4>;
207					};
208
209					phy6: ethernet-phy@5 {
210						reg = <0x5>;
211					};
212
213					phy7: ethernet-phy@6 {
214						reg = <0x6>;
215					};
216
217					phy8: ethernet-phy@7 {
218						reg = <0x7>;
219					};
220
221					sgmiiphy21: ethernet-phy@1c {
222						reg = <0x1c>;
223					};
224
225					sgmiiphy22: ethernet-phy@1d {
226						reg = <0x1d>;
227					};
228
229					sgmiiphy23: ethernet-phy@1e {
230						reg = <0x1e>;
231					};
232
233					sgmiiphy24: ethernet-phy@1f {
234						reg = <0x1f>;
235					};
236				};
237
238				t4240mdio3: mdio@60 {
239					#address-cells = <1>;
240					#size-cells = <0>;
241					reg = <0x60>;
242					status = "disabled";
243
244					phy9: ethernet-phy@8 {
245						reg = <0x8>;
246					};
247
248					phy10: ethernet-phy@9 {
249						reg = <0x9>;
250					};
251
252					phy11: ethernet-phy@a {
253						reg = <0xa>;
254					};
255
256					phy12: ethernet-phy@b {
257						reg = <0xb>;
258					};
259
260					sgmiiphy31: ethernet-phy@1c {
261						reg = <0x1c>;
262					};
263
264					sgmiiphy32: ethernet-phy@1d {
265						reg = <0x1d>;
266					};
267
268					sgmiiphy33: ethernet-phy@1e {
269						reg = <0x1e>;
270					};
271
272					sgmiiphy34: ethernet-phy@1f {
273						reg = <0x1f>;
274					};
275				};
276
277				t4240mdio4: mdio@80 {
278					#address-cells = <1>;
279					#size-cells = <0>;
280					reg = <0x80>;
281					status = "disabled";
282
283					phy13: ethernet-phy@c {
284						reg = <0xc>;
285					};
286
287					phy14: ethernet-phy@d {
288						reg = <0xd>;
289					};
290
291					phy15: ethernet-phy@e {
292						reg = <0xe>;
293					};
294
295					phy16: ethernet-phy@f {
296						reg = <0xf>;
297					};
298
299					sgmiiphy41: ethernet-phy@1c {
300						reg = <0x1c>;
301					};
302
303					sgmiiphy42: ethernet-phy@1d {
304						reg = <0x1d>;
305					};
306
307					sgmiiphy43: ethernet-phy@1e {
308						reg = <0x1e>;
309					};
310
311					sgmiiphy44: ethernet-phy@1f {
312						reg = <0x1f>;
313					};
314				};
315			};
316		};
317	};
318
319	memory {
320		device_type = "memory";
321	};
322
323	reserved-memory {
324		#address-cells = <2>;
325		#size-cells = <2>;
326		ranges;
327
328		bman_fbpr: bman-fbpr {
329			size = <0 0x1000000>;
330			alignment = <0 0x1000000>;
331		};
332		qman_fqd: qman-fqd {
333			size = <0 0x400000>;
334			alignment = <0 0x400000>;
335		};
336		qman_pfdr: qman-pfdr {
337			size = <0 0x2000000>;
338			alignment = <0 0x2000000>;
339		};
340	};
341
342	dcsr: dcsr@f00000000 {
343		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
344	};
345
346	bportals: bman-portals@ff4000000 {
347		ranges = <0x0 0xf 0xf4000000 0x2000000>;
348	};
349
350	qportals: qman-portals@ff6000000 {
351		ranges = <0x0 0xf 0xf6000000 0x2000000>;
352	};
353
354	soc: soc@ffe000000 {
355		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
356		reg = <0xf 0xfe000000 0 0x00001000>;
357		spi@110000 {
358			flash@0 {
359				#address-cells = <1>;
360				#size-cells = <1>;
361				compatible = "sst,sst25wf040", "jedec,spi-nor";
362				reg = <0>;
363				spi-max-frequency = <40000000>; /* input clock */
364			};
365		};
366
367		i2c@118000 {
368			mux@77 {
369				compatible = "nxp,pca9547";
370				reg = <0x77>;
371				#address-cells = <1>;
372				#size-cells = <0>;
373
374				i2c@0 {
375					#address-cells = <1>;
376					#size-cells = <0>;
377					reg = <0>;
378
379					eeprom@51 {
380						compatible = "atmel,24c256";
381						reg = <0x51>;
382					};
383					eeprom@52 {
384						compatible = "atmel,24c256";
385						reg = <0x52>;
386					};
387					eeprom@53 {
388						compatible = "atmel,24c256";
389						reg = <0x53>;
390					};
391					eeprom@54 {
392						compatible = "atmel,24c256";
393						reg = <0x54>;
394					};
395					eeprom@55 {
396						compatible = "atmel,24c256";
397						reg = <0x55>;
398					};
399					eeprom@56 {
400						compatible = "atmel,24c256";
401						reg = <0x56>;
402					};
403					rtc@68 {
404						compatible = "dallas,ds3232";
405						reg = <0x68>;
406						interrupts = <0x1 0x1 0 0>;
407					};
408				};
409
410				i2c@2 {
411					#address-cells = <1>;
412					#size-cells = <0>;
413					reg = <0x2>;
414
415					ina220@40 {
416						compatible = "ti,ina220";
417						reg = <0x40>;
418						shunt-resistor = <1000>;
419					};
420
421					ina220@41 {
422						compatible = "ti,ina220";
423						reg = <0x41>;
424						shunt-resistor = <1000>;
425					};
426
427					ina220@44 {
428						compatible = "ti,ina220";
429						reg = <0x44>;
430						shunt-resistor = <1000>;
431					};
432
433					ina220@45 {
434						compatible = "ti,ina220";
435						reg = <0x45>;
436						shunt-resistor = <1000>;
437					};
438
439					ina220@46 {
440						compatible = "ti,ina220";
441						reg = <0x46>;
442						shunt-resistor = <1000>;
443					};
444
445					ina220@47 {
446						compatible = "ti,ina220";
447						reg = <0x47>;
448						shunt-resistor = <1000>;
449					};
450				};
451			};
452		};
453
454		sdhc@114000 {
455			voltage-ranges = <1800 1800 3300 3300>;
456		};
457
458		fman@400000 {
459			port@83000 {
460				status = "disabled";
461			};
462
463			port@84000 {
464				status = "disabled";
465			};
466
467			port@85000 {
468				status = "disabled";
469			};
470
471			port@86000 {
472				status = "disabled";
473			};
474
475			port@87000 {
476				status = "disabled";
477			};
478
479			ethernet@e0000 {
480				phy-handle = <&phy5>;
481				phy-connection-type = "sgmii";
482			};
483
484			ethernet@e2000 {
485				phy-handle = <&phy6>;
486				phy-connection-type = "sgmii";
487			};
488
489			ethernet@e4000 {
490				phy-handle = <&phy7>;
491				phy-connection-type = "sgmii";
492			};
493
494			ethernet@e6000 {
495				phy-handle = <&phy8>;
496				phy-connection-type = "sgmii";
497			};
498
499			ethernet@e8000 {
500				phy-handle = <&phyrgmii2>;
501				phy-connection-type = "rgmii";
502			};
503
504			ethernet@ea000 {
505				phy-handle = <&phy2>;
506				phy-connection-type = "sgmii";
507			};
508
509			ethernet@f0000 {
510				phy-handle = <&xauiphy1>;
511				phy-connection-type = "xgmii";
512			};
513
514			ethernet@f2000 {
515				phy-handle = <&xauiphy2>;
516				phy-connection-type = "xgmii";
517			};
518
519			xfimdio0: mdio@f1000 {
520				status = "disabled";
521
522				xfiphy1: ethernet-phy@0 {
523					compatible = "ethernet-phy-ieee802.3-c45";
524					reg = <0x0>;
525				};
526			};
527
528			xfimdio1: mdio@f3000 {
529				status = "disabled";
530
531				xfiphy2: ethernet-phy@0 {
532					compatible = "ethernet-phy-ieee802.3-c45";
533					reg = <0x0>;
534				};
535			};
536		};
537
538		fman@500000 {
539			port@84000 {
540				status = "disabled";
541			};
542
543			port@85000 {
544				status = "disabled";
545			};
546
547			port@86000 {
548				status = "disabled";
549			};
550
551			port@87000 {
552				status = "disabled";
553			};
554
555			ethernet@e0000 {
556				phy-handle = <&phy13>;
557				phy-connection-type = "sgmii";
558			};
559
560			ethernet@e2000 {
561				phy-handle = <&phy14>;
562				phy-connection-type = "sgmii";
563			};
564
565			ethernet@e4000 {
566				phy-handle = <&phy15>;
567				phy-connection-type = "sgmii";
568			};
569
570			ethernet@e6000 {
571				phy-handle = <&phy16>;
572				phy-connection-type = "sgmii";
573			};
574
575			ethernet@e8000 {
576				phy-handle = <&phyrgmii1>;
577				phy-connection-type = "rgmii";
578			};
579
580			ethernet@ea000 {
581				phy-handle = <&phy10>;
582				phy-connection-type = "sgmii";
583			};
584
585			ethernet@f0000 {
586				phy-handle = <&xauiphy3>;
587				phy-connection-type = "xgmii";
588			};
589
590			ethernet@f2000 {
591				phy-handle = <&xauiphy4>;
592				phy-connection-type = "xgmii";
593			};
594
595			xfimdio2: mdio@f1000 {
596				status = "disabled";
597
598				xfiphy3: ethernet-phy@0 {
599					compatible = "ethernet-phy-ieee802.3-c45";
600					reg = <0x0>;
601				};
602			};
603
604			xfimdio3: mdio@f3000 {
605				status = "disabled";
606
607				xfiphy4: ethernet-phy@0 {
608					compatible = "ethernet-phy-ieee802.3-c45";
609					reg = <0x0>;
610				};
611			};
612
613			mdio@fd000 {
614				xauiphy1: ethernet-phy@0 {
615					compatible = "ethernet-phy-ieee802.3-c45";
616					reg = <0x0>;
617				};
618
619				xauiphy2: ethernet-phy@1 {
620					compatible = "ethernet-phy-ieee802.3-c45";
621					reg = <0x1>;
622				};
623
624				xauiphy3: ethernet-phy@2 {
625					compatible = "ethernet-phy-ieee802.3-c45";
626					reg = <0x2>;
627				};
628
629				xauiphy4: ethernet-phy@3 {
630					compatible = "ethernet-phy-ieee802.3-c45";
631					reg = <0x3>;
632				};
633			};
634		};
635	};
636
637	pci0: pcie@ffe240000 {
638		reg = <0xf 0xfe240000 0 0x10000>;
639		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
640			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
641		pcie@0 {
642			ranges = <0x02000000 0 0xe0000000
643				  0x02000000 0 0xe0000000
644				  0 0x20000000
645
646				  0x01000000 0 0x00000000
647				  0x01000000 0 0x00000000
648				  0 0x00010000>;
649		};
650	};
651
652	pci1: pcie@ffe250000 {
653		reg = <0xf 0xfe250000 0 0x10000>;
654		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
655			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
656		pcie@0 {
657			ranges = <0x02000000 0 0xe0000000
658				  0x02000000 0 0xe0000000
659				  0 0x20000000
660
661				  0x01000000 0 0x00000000
662				  0x01000000 0 0x00000000
663				  0 0x00010000>;
664		};
665	};
666
667	pci2: pcie@ffe260000 {
668		reg = <0xf 0xfe260000 0 0x1000>;
669		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
670			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
671		pcie@0 {
672			ranges = <0x02000000 0 0xe0000000
673				  0x02000000 0 0xe0000000
674				  0 0x20000000
675
676				  0x01000000 0 0x00000000
677				  0x01000000 0 0x00000000
678				  0 0x00010000>;
679		};
680	};
681
682	pci3: pcie@ffe270000 {
683		reg = <0xf 0xfe270000 0 0x10000>;
684		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
685			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
686		pcie@0 {
687			ranges = <0x02000000 0 0xe0000000
688				  0x02000000 0 0xe0000000
689				  0 0x20000000
690
691				  0x01000000 0 0x00000000
692				  0x01000000 0 0x00000000
693				  0 0x00010000>;
694		};
695	};
696	rio: rapidio@ffe0c0000 {
697		reg = <0xf 0xfe0c0000 0 0x11000>;
698
699		port1 {
700			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
701		};
702		port2 {
703			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
704		};
705	};
706};
707
708/include/ "t4240si-post.dtsi"
709