1/* 2 * P2020DS Device Tree Source stub (no addresses or top-level ranges) 3 * 4 * Copyright 2011-2012 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35&board_lbc { 36 nor@0,0 { 37 #address-cells = <1>; 38 #size-cells = <1>; 39 compatible = "cfi-flash"; 40 reg = <0x0 0x0 0x8000000>; 41 bank-width = <2>; 42 device-width = <1>; 43 44 ramdisk@0 { 45 reg = <0x0 0x03000000>; 46 read-only; 47 }; 48 49 diagnostic@3000000 { 50 reg = <0x03000000 0x00e00000>; 51 read-only; 52 }; 53 54 dink@3e00000 { 55 reg = <0x03e00000 0x00200000>; 56 read-only; 57 }; 58 59 kernel@4000000 { 60 reg = <0x04000000 0x00400000>; 61 read-only; 62 }; 63 64 jffs2@4400000 { 65 reg = <0x04400000 0x03b00000>; 66 }; 67 68 dtb@7f00000 { 69 reg = <0x07f00000 0x00080000>; 70 read-only; 71 }; 72 73 u-boot@7f80000 { 74 reg = <0x07f80000 0x00080000>; 75 read-only; 76 }; 77 }; 78 79 nand@2,0 { 80 #address-cells = <1>; 81 #size-cells = <1>; 82 compatible = "fsl,elbc-fcm-nand"; 83 reg = <0x2 0x0 0x40000>; 84 85 u-boot@0 { 86 reg = <0x0 0x02000000>; 87 read-only; 88 }; 89 90 jffs2@2000000 { 91 reg = <0x02000000 0x10000000>; 92 }; 93 94 ramdisk@12000000 { 95 reg = <0x12000000 0x08000000>; 96 read-only; 97 }; 98 99 kernel@1a000000 { 100 reg = <0x1a000000 0x04000000>; 101 }; 102 103 dtb@1e000000 { 104 reg = <0x1e000000 0x01000000>; 105 read-only; 106 }; 107 108 empty@1f000000 { 109 reg = <0x1f000000 0x21000000>; 110 }; 111 }; 112 113 board-control@3,0 { 114 compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis"; 115 reg = <0x3 0x0 0x30>; 116 }; 117 118 nand@4,0 { 119 compatible = "fsl,elbc-fcm-nand"; 120 reg = <0x4 0x0 0x40000>; 121 }; 122 123 nand@5,0 { 124 compatible = "fsl,elbc-fcm-nand"; 125 reg = <0x5 0x0 0x40000>; 126 }; 127 128 nand@6,0 { 129 compatible = "fsl,elbc-fcm-nand"; 130 reg = <0x6 0x0 0x40000>; 131 }; 132}; 133 134&board_soc { 135 usb@22000 { 136 phy_type = "ulpi"; 137 dr_mode = "host"; 138 }; 139 140 mdio@24520 { 141 phy0: ethernet-phy@0 { 142 interrupts = <3 1 0 0>; 143 reg = <0x0>; 144 }; 145 phy1: ethernet-phy@1 { 146 interrupts = <3 1 0 0>; 147 reg = <0x1>; 148 }; 149 phy2: ethernet-phy@2 { 150 interrupts = <3 1 0 0>; 151 reg = <0x2>; 152 }; 153 154 sgmii_phy1: sgmii-phy@1 { 155 interrupts = <5 1 0 0>; 156 reg = <0x1c>; 157 }; 158 sgmii_phy2: sgmii-phy@2 { 159 interrupts = <5 1 0 0>; 160 reg = <0x1d>; 161 }; 162 163 tbi0: tbi-phy@11 { 164 reg = <0x11>; 165 device_type = "tbi-phy"; 166 }; 167 168 }; 169 170 mdio@25520 { 171 tbi1: tbi-phy@11 { 172 reg = <0x11>; 173 device_type = "tbi-phy"; 174 }; 175 }; 176 177 mdio@26520 { 178 tbi2: tbi-phy@11 { 179 reg = <0x11>; 180 device_type = "tbi-phy"; 181 }; 182 183 }; 184 185 ptp_clock@24e00 { 186 fsl,tclk-period = <5>; 187 fsl,tmr-prsc = <200>; 188 fsl,tmr-add = <0xCCCCCCCD>; 189 fsl,tmr-fiper1 = <0x3B9AC9FB>; 190 fsl,tmr-fiper2 = <0x0001869B>; 191 fsl,max-adj = <249999999>; 192 }; 193 194 enet0: ethernet@24000 { 195 tbi-handle = <&tbi0>; 196 phy-handle = <&phy0>; 197 phy-connection-type = "rgmii-id"; 198 }; 199 200 enet1: ethernet@25000 { 201 tbi-handle = <&tbi1>; 202 phy-handle = <&phy1>; 203 phy-connection-type = "rgmii-id"; 204 205 }; 206 207 enet2: ethernet@26000 { 208 tbi-handle = <&tbi2>; 209 phy-handle = <&phy2>; 210 phy-connection-type = "rgmii-id"; 211 }; 212}; 213 214&board_pci1 { 215 pcie@0 { 216 interrupt-map-mask = <0xff00 0x0 0x0 0x7>; 217 interrupt-map = < 218 219 // IDSEL 0x11 func 0 - PCI slot 1 220 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2 221 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2 222 223 // IDSEL 0x11 func 1 - PCI slot 1 224 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2 225 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2 226 227 // IDSEL 0x11 func 2 - PCI slot 1 228 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2 229 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2 230 231 // IDSEL 0x11 func 3 - PCI slot 1 232 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2 233 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2 234 235 // IDSEL 0x11 func 4 - PCI slot 1 236 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2 237 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2 238 239 // IDSEL 0x11 func 5 - PCI slot 1 240 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2 241 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2 242 243 // IDSEL 0x11 func 6 - PCI slot 1 244 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2 245 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2 246 247 // IDSEL 0x11 func 7 - PCI slot 1 248 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2 249 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2 250 251 // IDSEL 0x1d Audio 252 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 253 254 // IDSEL 0x1e Legacy 255 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 256 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 257 258 // IDSEL 0x1f IDE/SATA 259 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 260 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 261 >; 262 263 uli1575@0 { 264 reg = <0x0 0x0 0x0 0x0 0x0>; 265 #size-cells = <2>; 266 #address-cells = <3>; 267 ranges = <0x2000000 0x0 0xa0000000 268 0x2000000 0x0 0xa0000000 269 0x0 0x20000000 270 271 0x1000000 0x0 0x0 272 0x1000000 0x0 0x0 273 0x0 0x10000>; 274 isa@1e { 275 device_type = "isa"; 276 #interrupt-cells = <2>; 277 #size-cells = <1>; 278 #address-cells = <2>; 279 reg = <0xf000 0x0 0x0 0x0 0x0>; 280 ranges = <0x1 0x0 0x1000000 0x0 0x0 281 0x1000>; 282 interrupt-parent = <&i8259>; 283 284 i8259: interrupt-controller@20 { 285 reg = <0x1 0x20 0x2 286 0x1 0xa0 0x2 287 0x1 0x4d0 0x2>; 288 interrupt-controller; 289 device_type = "interrupt-controller"; 290 #address-cells = <0>; 291 #interrupt-cells = <2>; 292 compatible = "chrp,iic"; 293 interrupts = <4 1 0 0>; 294 interrupt-parent = <&mpic>; 295 }; 296 297 i8042@60 { 298 #size-cells = <0>; 299 #address-cells = <1>; 300 reg = <0x1 0x60 0x1 0x1 0x64 0x1>; 301 interrupts = <1 3 12 3>; 302 interrupt-parent = 303 <&i8259>; 304 305 keyboard@0 { 306 reg = <0x0>; 307 compatible = "pnpPNP,303"; 308 }; 309 310 mouse@1 { 311 reg = <0x1>; 312 compatible = "pnpPNP,f03"; 313 }; 314 }; 315 316 rtc@70 { 317 compatible = "pnpPNP,b00"; 318 reg = <0x1 0x70 0x2>; 319 }; 320 321 gpio@400 { 322 reg = <0x1 0x400 0x80>; 323 }; 324 }; 325 }; 326 }; 327}; 328