xref: /freebsd/sys/contrib/device-tree/src/powerpc/fsl/p1020si-post.dtsi (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1/*
2 * P1020/P1011 Silicon/SoC Device Tree Source (post include)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&lbc {
36	#address-cells = <2>;
37	#size-cells = <1>;
38	compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
39	interrupts = <19 2 0 0>,
40		     <16 2 0 0>;
41};
42
43/* controller at 0x9000 */
44&pci0 {
45	compatible = "fsl,mpc8548-pcie";
46	device_type = "pci";
47	#size-cells = <2>;
48	#address-cells = <3>;
49	bus-range = <0 255>;
50	clock-frequency = <33333333>;
51	interrupts = <16 2 0 0>;
52
53	pcie@0 {
54		reg = <0 0 0 0 0>;
55		#interrupt-cells = <1>;
56		#size-cells = <2>;
57		#address-cells = <3>;
58		device_type = "pci";
59		interrupts = <16 2 0 0>;
60		interrupt-map-mask = <0xf800 0 0 7>;
61		interrupt-map = <
62			/* IDSEL 0x0 */
63			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
64			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
65			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
66			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
67			>;
68	};
69};
70
71/* controller at 0xa000 */
72&pci1 {
73	compatible = "fsl,mpc8548-pcie";
74	device_type = "pci";
75	#size-cells = <2>;
76	#address-cells = <3>;
77	bus-range = <0 255>;
78	clock-frequency = <33333333>;
79	interrupts = <16 2 0 0>;
80
81	pcie@0 {
82		reg = <0 0 0 0 0>;
83		#interrupt-cells = <1>;
84		#size-cells = <2>;
85		#address-cells = <3>;
86		device_type = "pci";
87		interrupts = <16 2 0 0>;
88		interrupt-map-mask = <0xf800 0 0 7>;
89
90		interrupt-map = <
91			/* IDSEL 0x0 */
92			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
93			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
94			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
95			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
96			>;
97	};
98};
99
100&soc {
101	#address-cells = <1>;
102	#size-cells = <1>;
103	device_type = "soc";
104	compatible = "fsl,p1020-immr", "simple-bus";
105	bus-frequency = <0>;		// Filled out by uboot.
106
107	ecm-law@0 {
108		compatible = "fsl,ecm-law";
109		reg = <0x0 0x1000>;
110		fsl,num-laws = <12>;
111	};
112
113	ecm@1000 {
114		compatible = "fsl,p1020-ecm", "fsl,ecm";
115		reg = <0x1000 0x1000>;
116		interrupts = <16 2 0 0>;
117	};
118
119	memory-controller@2000 {
120		compatible = "fsl,p1020-memory-controller";
121		reg = <0x2000 0x1000>;
122		interrupts = <16 2 0 0>;
123	};
124
125/include/ "pq3-i2c-0.dtsi"
126/include/ "pq3-i2c-1.dtsi"
127/include/ "pq3-duart-0.dtsi"
128
129/include/ "pq3-espi-0.dtsi"
130	spi@7000 {
131		fsl,espi-num-chipselects = <4>;
132	};
133
134/include/ "pq3-gpio-0.dtsi"
135
136	L2: l2-cache-controller@20000 {
137		compatible = "fsl,p1020-l2-cache-controller";
138		reg = <0x20000 0x1000>;
139		cache-line-size = <32>;	// 32 bytes
140		cache-size = <0x40000>; // L2,256K
141		interrupts = <16 2 0 0>;
142	};
143
144/include/ "pq3-dma-0.dtsi"
145/include/ "pq3-usb2-dr-0.dtsi"
146	usb@22000 {
147		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
148	};
149/include/ "pq3-usb2-dr-1.dtsi"
150	usb@23000 {
151		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
152	};
153
154/include/ "pq3-esdhc-0.dtsi"
155	sdhc@2e000 {
156		compatible = "fsl,p1020-esdhc", "fsl,esdhc";
157		sdhci,auto-cmd12;
158	};
159/include/ "pq3-sec3.3-0.dtsi"
160
161/include/ "pq3-mpic.dtsi"
162/include/ "pq3-mpic-timer-B.dtsi"
163
164/include/ "pq3-etsec2-0.dtsi"
165	enet0: enet0_grp2: ethernet@b0000 {
166	};
167
168/include/ "pq3-etsec2-1.dtsi"
169	enet1: enet1_grp2: ethernet@b1000 {
170	};
171
172/include/ "pq3-etsec2-2.dtsi"
173	enet2: enet2_grp2: ethernet@b2000 {
174	};
175
176	global-utilities@e0000 {
177		compatible = "fsl,p1020-guts";
178		reg = <0xe0000 0x1000>;
179		fsl,has-rstcr;
180	};
181};
182
183/include/ "pq3-etsec2-grp2-0.dtsi"
184/include/ "pq3-etsec2-grp2-1.dtsi"
185/include/ "pq3-etsec2-grp2-2.dtsi"
186