xref: /freebsd/sys/contrib/device-tree/src/powerpc/fsl/mpc8641_hpcn.dts (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC8641 HPCN Device Tree Source
4 *
5 * Copyright 2006 Freescale Semiconductor Inc.
6 */
7
8/include/ "mpc8641si-pre.dtsi"
9
10/ {
11	model = "MPC8641HPCN";
12	compatible = "fsl,mpc8641hpcn";
13
14	memory {
15		device_type = "memory";
16		reg = <0x00000000 0x40000000>;	// 1G at 0x0
17	};
18
19	lbc: localbus@ffe05000 {
20		reg = <0xffe05000 0x1000>;
21
22		ranges = <0 0 0xef800000 0x00800000
23			  2 0 0xffdf8000 0x00008000
24			  3 0 0xffdf0000 0x00008000>;
25
26		flash@0,0 {
27			compatible = "cfi-flash";
28			reg = <0 0 0x00800000>;
29			bank-width = <2>;
30			device-width = <2>;
31			#address-cells = <1>;
32			#size-cells = <1>;
33			partition@0 {
34				label = "kernel";
35				reg = <0x00000000 0x00300000>;
36			};
37			partition@300000 {
38				label = "firmware b";
39				reg = <0x00300000 0x00100000>;
40				read-only;
41			};
42			partition@400000 {
43				label = "fs";
44				reg = <0x00400000 0x00300000>;
45			};
46			partition@700000 {
47				label = "firmware a";
48				reg = <0x00700000 0x00100000>;
49				read-only;
50			};
51		};
52	};
53
54	soc: soc8641@ffe00000 {
55		ranges = <0x00000000 0xffe00000 0x00100000>;
56
57		enet0: ethernet@24000 {
58			tbi-handle = <&tbi0>;
59			phy-handle = <&phy0>;
60			phy-connection-type = "rgmii-id";
61		};
62
63		mdio@24520 {
64			phy0: ethernet-phy@0 {
65				interrupts = <10 1 0 0>;
66				reg = <0>;
67			};
68			phy1: ethernet-phy@1 {
69				interrupts = <10 1 0 0>;
70				reg = <1>;
71			};
72			phy2: ethernet-phy@2 {
73				interrupts = <10 1 0 0>;
74				reg = <2>;
75			};
76			phy3: ethernet-phy@3 {
77				interrupts = <10 1 0 0>;
78				reg = <3>;
79			};
80			tbi0: tbi-phy@11 {
81				reg = <0x11>;
82				device_type = "tbi-phy";
83			};
84		};
85
86		enet1: ethernet@25000 {
87			tbi-handle = <&tbi1>;
88			phy-handle = <&phy1>;
89			phy-connection-type = "rgmii-id";
90		};
91
92		mdio@25520 {
93			tbi1: tbi-phy@11 {
94				reg = <0x11>;
95				device_type = "tbi-phy";
96			};
97		};
98
99		enet2: ethernet@26000 {
100			tbi-handle = <&tbi2>;
101			phy-handle = <&phy2>;
102			phy-connection-type = "rgmii-id";
103		};
104
105		mdio@26520 {
106			tbi2: tbi-phy@11 {
107				reg = <0x11>;
108				device_type = "tbi-phy";
109			};
110		};
111
112		enet3: ethernet@27000 {
113			tbi-handle = <&tbi3>;
114			phy-handle = <&phy3>;
115			phy-connection-type = "rgmii-id";
116		};
117
118		mdio@27520 {
119			tbi3: tbi-phy@11 {
120				reg = <0x11>;
121				device_type = "tbi-phy";
122			};
123		};
124
125		rmu: rmu@d3000 {
126			#address-cells = <1>;
127			#size-cells = <1>;
128			compatible = "fsl,srio-rmu";
129			reg = <0xd3000 0x500>;
130			ranges = <0x0 0xd3000 0x500>;
131
132			message-unit@0 {
133				compatible = "fsl,srio-msg-unit";
134				reg = <0x0 0x100>;
135				interrupts = <
136					53 2 0 0  /* msg1_tx_irq */
137					54 2 0 0>;/* msg1_rx_irq */
138			};
139			message-unit@100 {
140				compatible = "fsl,srio-msg-unit";
141				reg = <0x100 0x100>;
142				interrupts = <
143					55 2 0 0  /* msg2_tx_irq */
144					56 2 0 0>;/* msg2_rx_irq */
145			};
146			doorbell-unit@400 {
147				compatible = "fsl,srio-dbell-unit";
148				reg = <0x400 0x80>;
149				interrupts = <
150					49 2 0 0  /* bell_outb_irq */
151					50 2 0 0>;/* bell_inb_irq */
152			};
153			port-write-unit@4e0 {
154				compatible = "fsl,srio-port-write-unit";
155				reg = <0x4e0 0x20>;
156				interrupts = <48 2 0 0>;
157			};
158		};
159	};
160
161	pci0: pcie@ffe08000 {
162		reg = <0xffe08000 0x1000>;
163		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
164			  0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
165		interrupt-map-mask = <0xff00 0 0 7>;
166		interrupt-map = <
167			/* IDSEL 0x11 func 0 - PCI slot 1 */
168			0x8800 0 0 1 &mpic 2 1 0 0
169			0x8800 0 0 2 &mpic 3 1 0 0
170			0x8800 0 0 3 &mpic 4 1 0 0
171			0x8800 0 0 4 &mpic 1 1 0 0
172
173			/* IDSEL 0x11 func 1 - PCI slot 1 */
174			0x8900 0 0 1 &mpic 2 1 0 0
175			0x8900 0 0 2 &mpic 3 1 0 0
176			0x8900 0 0 3 &mpic 4 1 0 0
177			0x8900 0 0 4 &mpic 1 1 0 0
178
179			/* IDSEL 0x11 func 2 - PCI slot 1 */
180			0x8a00 0 0 1 &mpic 2 1 0 0
181			0x8a00 0 0 2 &mpic 3 1 0 0
182			0x8a00 0 0 3 &mpic 4 1 0 0
183			0x8a00 0 0 4 &mpic 1 1 0 0
184
185			/* IDSEL 0x11 func 3 - PCI slot 1 */
186			0x8b00 0 0 1 &mpic 2 1 0 0
187			0x8b00 0 0 2 &mpic 3 1 0 0
188			0x8b00 0 0 3 &mpic 4 1 0 0
189			0x8b00 0 0 4 &mpic 1 1 0 0
190
191			/* IDSEL 0x11 func 4 - PCI slot 1 */
192			0x8c00 0 0 1 &mpic 2 1 0 0
193			0x8c00 0 0 2 &mpic 3 1 0 0
194			0x8c00 0 0 3 &mpic 4 1 0 0
195			0x8c00 0 0 4 &mpic 1 1 0 0
196
197			/* IDSEL 0x11 func 5 - PCI slot 1 */
198			0x8d00 0 0 1 &mpic 2 1 0 0
199			0x8d00 0 0 2 &mpic 3 1 0 0
200			0x8d00 0 0 3 &mpic 4 1 0 0
201			0x8d00 0 0 4 &mpic 1 1 0 0
202
203			/* IDSEL 0x11 func 6 - PCI slot 1 */
204			0x8e00 0 0 1 &mpic 2 1 0 0
205			0x8e00 0 0 2 &mpic 3 1 0 0
206			0x8e00 0 0 3 &mpic 4 1 0 0
207			0x8e00 0 0 4 &mpic 1 1 0 0
208
209			/* IDSEL 0x11 func 7 - PCI slot 1 */
210			0x8f00 0 0 1 &mpic 2 1 0 0
211			0x8f00 0 0 2 &mpic 3 1 0 0
212			0x8f00 0 0 3 &mpic 4 1 0 0
213			0x8f00 0 0 4 &mpic 1 1 0 0
214
215			/* IDSEL 0x12 func 0 - PCI slot 2 */
216			0x9000 0 0 1 &mpic 3 1 0 0
217			0x9000 0 0 2 &mpic 4 1 0 0
218			0x9000 0 0 3 &mpic 1 1 0 0
219			0x9000 0 0 4 &mpic 2 1 0 0
220
221			/* IDSEL 0x12 func 1 - PCI slot 2 */
222			0x9100 0 0 1 &mpic 3 1 0 0
223			0x9100 0 0 2 &mpic 4 1 0 0
224			0x9100 0 0 3 &mpic 1 1 0 0
225			0x9100 0 0 4 &mpic 2 1 0 0
226
227			/* IDSEL 0x12 func 2 - PCI slot 2 */
228			0x9200 0 0 1 &mpic 3 1 0 0
229			0x9200 0 0 2 &mpic 4 1 0 0
230			0x9200 0 0 3 &mpic 1 1 0 0
231			0x9200 0 0 4 &mpic 2 1 0 0
232
233			/* IDSEL 0x12 func 3 - PCI slot 2 */
234			0x9300 0 0 1 &mpic 3 1 0 0
235			0x9300 0 0 2 &mpic 4 1 0 0
236			0x9300 0 0 3 &mpic 1 1 0 0
237			0x9300 0 0 4 &mpic 2 1 0 0
238
239			/* IDSEL 0x12 func 4 - PCI slot 2 */
240			0x9400 0 0 1 &mpic 3 1 0 0
241			0x9400 0 0 2 &mpic 4 1 0 0
242			0x9400 0 0 3 &mpic 1 1 0 0
243			0x9400 0 0 4 &mpic 2 1 0 0
244
245			/* IDSEL 0x12 func 5 - PCI slot 2 */
246			0x9500 0 0 1 &mpic 3 1 0 0
247			0x9500 0 0 2 &mpic 4 1 0 0
248			0x9500 0 0 3 &mpic 1 1 0 0
249			0x9500 0 0 4 &mpic 2 1 0 0
250
251			/* IDSEL 0x12 func 6 - PCI slot 2 */
252			0x9600 0 0 1 &mpic 3 1 0 0
253			0x9600 0 0 2 &mpic 4 1 0 0
254			0x9600 0 0 3 &mpic 1 1 0 0
255			0x9600 0 0 4 &mpic 2 1 0 0
256
257			/* IDSEL 0x12 func 7 - PCI slot 2 */
258			0x9700 0 0 1 &mpic 3 1 0 0
259			0x9700 0 0 2 &mpic 4 1 0 0
260			0x9700 0 0 3 &mpic 1 1 0 0
261			0x9700 0 0 4 &mpic 2 1 0 0
262
263			// IDSEL 0x1c  USB
264			0xe000 0 0 1 &i8259 12 2
265			0xe100 0 0 2 &i8259 9 2
266			0xe200 0 0 3 &i8259 10 2
267			0xe300 0 0 4 &i8259 11 2
268
269			// IDSEL 0x1d  Audio
270			0xe800 0 0 1 &i8259 6 2
271
272			// IDSEL 0x1e Legacy
273			0xf000 0 0 1 &i8259 7 2
274			0xf100 0 0 1 &i8259 7 2
275
276			// IDSEL 0x1f IDE/SATA
277			0xf800 0 0 1 &i8259 14 2
278			0xf900 0 0 1 &i8259 5 2
279			>;
280
281		pcie@0 {
282			ranges = <0x02000000 0x0 0x80000000
283				  0x02000000 0x0 0x80000000
284				  0x0 0x20000000
285
286				  0x01000000 0x0 0x00000000
287				  0x01000000 0x0 0x00000000
288				  0x0 0x00010000>;
289			uli1575@0 {
290				reg = <0 0 0 0 0>;
291				#size-cells = <2>;
292				#address-cells = <3>;
293				ranges = <0x02000000 0x0 0x80000000
294					  0x02000000 0x0 0x80000000
295					  0x0 0x20000000
296					  0x01000000 0x0 0x00000000
297					  0x01000000 0x0 0x00000000
298					  0x0 0x00010000>;
299				isa@1e {
300					device_type = "isa";
301					#size-cells = <1>;
302					#address-cells = <2>;
303					reg = <0xf000 0 0 0 0>;
304					ranges = <1 0 0x01000000 0 0
305						  0x00001000>;
306					interrupt-parent = <&i8259>;
307
308					i8259: interrupt-controller@20 {
309						reg = <1 0x20 2
310						       1 0xa0 2
311						       1 0x4d0 2>;
312						interrupt-controller;
313						device_type = "interrupt-controller";
314						#address-cells = <0>;
315						#interrupt-cells = <2>;
316						compatible = "chrp,iic";
317						interrupts = <9 2 0 0>;
318					};
319
320					i8042@60 {
321						#size-cells = <0>;
322						#address-cells = <1>;
323						reg = <1 0x60 1 1 0x64 1>;
324						interrupts = <1 3 12 3>;
325						interrupt-parent = <&i8259>;
326
327						keyboard@0 {
328							reg = <0>;
329							compatible = "pnpPNP,303";
330						};
331
332						mouse@1 {
333							reg = <1>;
334							compatible = "pnpPNP,f03";
335						};
336					};
337
338					rtc@70 {
339						compatible =
340							"pnpPNP,b00";
341						reg = <1 0x70 2>;
342					};
343
344					gpio@400 {
345						reg = <1 0x400 0x80>;
346					};
347				};
348			};
349		};
350
351	};
352
353	pci1: pcie@ffe09000 {
354		reg = <0xffe09000 0x1000>;
355		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
356			  0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
357
358		pcie@0 {
359			ranges = <0x02000000 0x0 0xa0000000
360				  0x02000000 0x0 0xa0000000
361				  0x0 0x20000000
362
363				  0x01000000 0x0 0x00000000
364				  0x01000000 0x0 0x00000000
365				  0x0 0x00010000>;
366		};
367	};
368/*
369 * Only one of Rapid IO or PCI can be present due to HW limitations and
370 * due to the fact that the 2 now share address space in the new memory
371 * map.  The most likely case is that we have PCI, so comment out the
372 * rapidio node.  Leave it here for reference.
373
374	rapidio@ffec0000 {
375		reg = <0xffec0000 0x11000>;
376		compatible = "fsl,srio";
377		interrupts = <48 2 0 0>;
378		#address-cells = <2>;
379		#size-cells = <2>;
380		fsl,srio-rmu-handle = <&rmu>;
381		ranges;
382
383		port1 {
384			#address-cells = <2>;
385			#size-cells = <2>;
386			cell-index = <1>;
387			ranges = <0 0 0x80000000 0 0x20000000>;
388		};
389	};
390*/
391
392};
393
394/include/ "mpc8641si-post.dtsi"
395