xref: /freebsd/sys/contrib/device-tree/src/powerpc/fsl/mpc8540ads.dts (revision 8ddb146abcdf061be9f2c0db7e391697dafad85c)
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC8540 ADS Device Tree Source
4 *
5 * Copyright 2006, 2008 Freescale Semiconductor Inc.
6 */
7
8/dts-v1/;
9
10/include/ "e500v2_power_isa.dtsi"
11
12/ {
13	model = "MPC8540ADS";
14	compatible = "MPC8540ADS", "MPC85xxADS";
15	#address-cells = <1>;
16	#size-cells = <1>;
17
18	aliases {
19		ethernet0 = &enet0;
20		ethernet1 = &enet1;
21		ethernet2 = &enet2;
22		serial0 = &serial0;
23		serial1 = &serial1;
24		pci0 = &pci0;
25	};
26
27	cpus {
28		#address-cells = <1>;
29		#size-cells = <0>;
30
31		PowerPC,8540@0 {
32			device_type = "cpu";
33			reg = <0x0>;
34			d-cache-line-size = <32>;	// 32 bytes
35			i-cache-line-size = <32>;	// 32 bytes
36			d-cache-size = <0x8000>;		// L1, 32K
37			i-cache-size = <0x8000>;		// L1, 32K
38			timebase-frequency = <0>;	//  33 MHz, from uboot
39			bus-frequency = <0>;	// 166 MHz
40			clock-frequency = <0>;	// 825 MHz, from uboot
41			next-level-cache = <&L2>;
42		};
43	};
44
45	memory {
46		device_type = "memory";
47		reg = <0x0 0x8000000>;	// 128M at 0x0
48	};
49
50	soc8540@e0000000 {
51		#address-cells = <1>;
52		#size-cells = <1>;
53		device_type = "soc";
54		compatible = "simple-bus";
55		ranges = <0x0 0xe0000000 0x100000>;
56		bus-frequency = <0>;
57
58		ecm-law@0 {
59			compatible = "fsl,ecm-law";
60			reg = <0x0 0x1000>;
61			fsl,num-laws = <8>;
62		};
63
64		ecm@1000 {
65			compatible = "fsl,mpc8540-ecm", "fsl,ecm";
66			reg = <0x1000 0x1000>;
67			interrupts = <17 2>;
68			interrupt-parent = <&mpic>;
69		};
70
71		memory-controller@2000 {
72			compatible = "fsl,mpc8540-memory-controller";
73			reg = <0x2000 0x1000>;
74			interrupt-parent = <&mpic>;
75			interrupts = <18 2>;
76		};
77
78		L2: l2-cache-controller@20000 {
79			compatible = "fsl,mpc8540-l2-cache-controller";
80			reg = <0x20000 0x1000>;
81			cache-line-size = <32>;	// 32 bytes
82			cache-size = <0x40000>;	// L2, 256K
83			interrupt-parent = <&mpic>;
84			interrupts = <16 2>;
85		};
86
87		i2c@3000 {
88			#address-cells = <1>;
89			#size-cells = <0>;
90			cell-index = <0>;
91			compatible = "fsl-i2c";
92			reg = <0x3000 0x100>;
93			interrupts = <43 2>;
94			interrupt-parent = <&mpic>;
95			dfsrr;
96		};
97
98		dma@21300 {
99			#address-cells = <1>;
100			#size-cells = <1>;
101			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
102			reg = <0x21300 0x4>;
103			ranges = <0x0 0x21100 0x200>;
104			cell-index = <0>;
105			dma-channel@0 {
106				compatible = "fsl,mpc8540-dma-channel",
107						"fsl,eloplus-dma-channel";
108				reg = <0x0 0x80>;
109				cell-index = <0>;
110				interrupt-parent = <&mpic>;
111				interrupts = <20 2>;
112			};
113			dma-channel@80 {
114				compatible = "fsl,mpc8540-dma-channel",
115						"fsl,eloplus-dma-channel";
116				reg = <0x80 0x80>;
117				cell-index = <1>;
118				interrupt-parent = <&mpic>;
119				interrupts = <21 2>;
120			};
121			dma-channel@100 {
122				compatible = "fsl,mpc8540-dma-channel",
123						"fsl,eloplus-dma-channel";
124				reg = <0x100 0x80>;
125				cell-index = <2>;
126				interrupt-parent = <&mpic>;
127				interrupts = <22 2>;
128			};
129			dma-channel@180 {
130				compatible = "fsl,mpc8540-dma-channel",
131						"fsl,eloplus-dma-channel";
132				reg = <0x180 0x80>;
133				cell-index = <3>;
134				interrupt-parent = <&mpic>;
135				interrupts = <23 2>;
136			};
137		};
138
139		enet0: ethernet@24000 {
140			#address-cells = <1>;
141			#size-cells = <1>;
142			cell-index = <0>;
143			device_type = "network";
144			model = "TSEC";
145			compatible = "gianfar";
146			reg = <0x24000 0x1000>;
147			ranges = <0x0 0x24000 0x1000>;
148			local-mac-address = [ 00 00 00 00 00 00 ];
149			interrupts = <29 2 30 2 34 2>;
150			interrupt-parent = <&mpic>;
151			tbi-handle = <&tbi0>;
152			phy-handle = <&phy0>;
153
154			mdio@520 {
155				#address-cells = <1>;
156				#size-cells = <0>;
157				compatible = "fsl,gianfar-mdio";
158				reg = <0x520 0x20>;
159
160				phy0: ethernet-phy@0 {
161					interrupt-parent = <&mpic>;
162					interrupts = <5 1>;
163					reg = <0x0>;
164				};
165				phy1: ethernet-phy@1 {
166					interrupt-parent = <&mpic>;
167					interrupts = <5 1>;
168					reg = <0x1>;
169				};
170				phy3: ethernet-phy@3 {
171					interrupt-parent = <&mpic>;
172					interrupts = <7 1>;
173					reg = <0x3>;
174				};
175				tbi0: tbi-phy@11 {
176					reg = <0x11>;
177					device_type = "tbi-phy";
178				};
179			};
180		};
181
182		enet1: ethernet@25000 {
183			#address-cells = <1>;
184			#size-cells = <1>;
185			cell-index = <1>;
186			device_type = "network";
187			model = "TSEC";
188			compatible = "gianfar";
189			reg = <0x25000 0x1000>;
190			ranges = <0x0 0x25000 0x1000>;
191			local-mac-address = [ 00 00 00 00 00 00 ];
192			interrupts = <35 2 36 2 40 2>;
193			interrupt-parent = <&mpic>;
194			tbi-handle = <&tbi1>;
195			phy-handle = <&phy1>;
196
197			mdio@520 {
198				#address-cells = <1>;
199				#size-cells = <0>;
200				compatible = "fsl,gianfar-tbi";
201				reg = <0x520 0x20>;
202
203				tbi1: tbi-phy@11 {
204					reg = <0x11>;
205					device_type = "tbi-phy";
206				};
207			};
208		};
209
210		enet2: ethernet@26000 {
211			#address-cells = <1>;
212			#size-cells = <1>;
213			cell-index = <2>;
214			device_type = "network";
215			model = "FEC";
216			compatible = "gianfar";
217			reg = <0x26000 0x1000>;
218			ranges = <0x0 0x26000 0x1000>;
219			local-mac-address = [ 00 00 00 00 00 00 ];
220			interrupts = <41 2>;
221			interrupt-parent = <&mpic>;
222			tbi-handle = <&tbi2>;
223			phy-handle = <&phy3>;
224
225			mdio@520 {
226				#address-cells = <1>;
227				#size-cells = <0>;
228				compatible = "fsl,gianfar-tbi";
229				reg = <0x520 0x20>;
230
231				tbi2: tbi-phy@11 {
232					reg = <0x11>;
233					device_type = "tbi-phy";
234				};
235			};
236		};
237
238		serial0: serial@4500 {
239			cell-index = <0>;
240			device_type = "serial";
241			compatible = "fsl,ns16550", "ns16550";
242			reg = <0x4500 0x100>; 	// reg base, size
243			clock-frequency = <0>; 	// should we fill in in uboot?
244			interrupts = <42 2>;
245			interrupt-parent = <&mpic>;
246		};
247
248		serial1: serial@4600 {
249			cell-index = <1>;
250			device_type = "serial";
251			compatible = "fsl,ns16550", "ns16550";
252			reg = <0x4600 0x100>;	// reg base, size
253			clock-frequency = <0>; 	// should we fill in in uboot?
254			interrupts = <42 2>;
255			interrupt-parent = <&mpic>;
256		};
257		mpic: pic@40000 {
258			interrupt-controller;
259			#address-cells = <0>;
260			#interrupt-cells = <2>;
261			reg = <0x40000 0x40000>;
262			compatible = "chrp,open-pic";
263			device_type = "open-pic";
264		};
265	};
266
267	pci0: pci@e0008000 {
268		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
269		interrupt-map = <
270
271			/* IDSEL 0x02 */
272			0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
273			0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
274			0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
275			0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
276
277			/* IDSEL 0x03 */
278			0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
279			0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
280			0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
281			0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
282
283			/* IDSEL 0x04 */
284			0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
285			0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
286			0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
287			0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
288
289			/* IDSEL 0x05 */
290			0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
291			0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
292			0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
293			0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
294
295			/* IDSEL 0x0c */
296			0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
297			0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
298			0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
299			0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
300
301			/* IDSEL 0x0d */
302			0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
303			0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
304			0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
305			0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
306
307			/* IDSEL 0x0e */
308			0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
309			0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
310			0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
311			0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
312
313			/* IDSEL 0x0f */
314			0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
315			0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
316			0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
317			0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
318
319			/* IDSEL 0x12 */
320			0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
321			0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
322			0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
323			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
324
325			/* IDSEL 0x13 */
326			0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
327			0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
328			0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
329			0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
330
331			/* IDSEL 0x14 */
332			0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
333			0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
334			0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
335			0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
336
337			/* IDSEL 0x15 */
338			0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
339			0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
340			0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
341			0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
342		interrupt-parent = <&mpic>;
343		interrupts = <24 2>;
344		bus-range = <0 0>;
345		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
346			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
347		clock-frequency = <66666666>;
348		#interrupt-cells = <1>;
349		#size-cells = <2>;
350		#address-cells = <3>;
351		reg = <0xe0008000 0x1000>;
352		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
353		device_type = "pci";
354	};
355};
356