1/* 2 * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges) 3 * 4 * Copyright 2011-2012 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35&board_ifc { 36 37 nand@0,0 { 38 #address-cells = <1>; 39 #size-cells = <1>; 40 compatible = "fsl,ifc-nand"; 41 reg = <0x0 0x0 0x4000>; 42 43 }; 44}; 45 46&board_soc { 47 /* BSC9131RDB does not have any device on i2c@3100 */ 48 i2c@3100 { 49 status = "disabled"; 50 }; 51 52 spi@7000 { 53 flash@0 { 54 #address-cells = <1>; 55 #size-cells = <1>; 56 compatible = "spansion,s25sl12801", "jedec,spi-nor"; 57 reg = <0>; 58 spi-max-frequency = <50000000>; 59 60 }; 61 }; 62 63 usb@22000 { 64 phy_type = "ulpi"; 65 }; 66 67 mdio@24000 { 68 phy0: ethernet-phy@0 { 69 interrupts = <3 1 0 0>; 70 reg = <0x0>; 71 }; 72 73 phy1: ethernet-phy@1 { 74 interrupts = <2 1 0 0>; 75 reg = <0x3>; 76 }; 77 }; 78 79 sdhc@2e000 { 80 status = "disabled"; 81 }; 82 83 ptp_clock@b0e00 { 84 compatible = "fsl,etsec-ptp"; 85 reg = <0xb0e00 0xb0>; 86 interrupts = <68 2 0 0 69 2 0 0>; 87 fsl,tclk-period = <5>; 88 fsl,tmr-prsc = <2>; 89 fsl,tmr-add = <0xcccccccd>; 90 fsl,tmr-fiper1 = <999999995>; 91 fsl,tmr-fiper2 = <99990>; 92 fsl,max-adj = <249999999>; 93 }; 94 95 enet0: ethernet@b0000 { 96 phy-handle = <&phy0>; 97 phy-connection-type = "rgmii-id"; 98 }; 99 100 enet1: ethernet@b1000 { 101 phy-handle = <&phy1>; 102 phy-connection-type = "rgmii-id"; 103 }; 104}; 105