xref: /freebsd/sys/contrib/device-tree/src/mips/ralink/mt7628a.dtsi (revision f126890ac5386406dadf7c4cfa9566cbb56537c5)
1// SPDX-License-Identifier: GPL-2.0
2
3/ {
4	#address-cells = <1>;
5	#size-cells = <1>;
6	compatible = "ralink,mt7628a-soc";
7
8	cpus {
9		#address-cells = <1>;
10		#size-cells = <0>;
11
12		cpu@0 {
13			compatible = "mti,mips24KEc";
14			device_type = "cpu";
15			reg = <0>;
16		};
17	};
18
19	resetc: reset-controller {
20		compatible = "ralink,rt2880-reset";
21		#reset-cells = <1>;
22	};
23
24	cpuintc: interrupt-controller {
25		#address-cells = <0>;
26		#interrupt-cells = <1>;
27		interrupt-controller;
28		compatible = "mti,cpu-interrupt-controller";
29	};
30
31	palmbus@10000000 {
32		compatible = "palmbus";
33		reg = <0x10000000 0x200000>;
34		ranges = <0x0 0x10000000 0x1FFFFF>;
35
36		#address-cells = <1>;
37		#size-cells = <1>;
38
39		sysc: system-controller@0 {
40			compatible = "ralink,mt7620a-sysc", "syscon";
41			reg = <0x0 0x60>;
42		};
43
44		pinmux: pinmux@60 {
45			compatible = "pinctrl-single";
46			reg = <0x60 0x8>;
47			#address-cells = <1>;
48			#size-cells = <0>;
49			#pinctrl-cells = <2>;
50			pinctrl-single,bit-per-mux;
51			pinctrl-single,register-width = <32>;
52			pinctrl-single,function-mask = <0x1>;
53
54			pinmux_gpio_gpio: gpio-gpio-pins {
55				pinctrl-single,bits = <0x0 0x0 0x3>;
56			};
57
58			pinmux_spi_cs1_cs: spi-cs1-cs-pins {
59				pinctrl-single,bits = <0x0 0x0 0x30>;
60			};
61
62			pinmux_i2s_gpio: i2s-gpio-pins {
63				pinctrl-single,bits = <0x0 0x40 0xc0>;
64			};
65
66			pinmux_uart0_uart: uart0-uart0-pins {
67				pinctrl-single,bits = <0x0 0x0 0x300>;
68			};
69
70			pinmux_sdmode_sdxc: sdmode-sdxc-pins {
71				pinctrl-single,bits = <0x0 0x0 0xc00>;
72			};
73
74			pinmux_sdmode_gpio: sdmode-gpio-pins {
75				pinctrl-single,bits = <0x0 0x400 0xc00>;
76			};
77
78			pinmux_spi_spi: spi-spi-pins {
79				pinctrl-single,bits = <0x0 0x0 0x1000>;
80			};
81
82			pinmux_refclk_gpio: refclk-gpio-pins {
83				pinctrl-single,bits = <0x0 0x40000 0x40000>;
84			};
85
86			pinmux_i2c_i2c: i2c-i2c-pins {
87				pinctrl-single,bits = <0x0 0x0 0x300000>;
88			};
89
90			pinmux_uart1_uart: uart1-uart1-pins {
91				pinctrl-single,bits = <0x0 0x0 0x3000000>;
92			};
93
94			pinmux_uart2_uart: uart2-uart-pins {
95				pinctrl-single,bits = <0x0 0x0 0xc000000>;
96			};
97
98			pinmux_pwm0_pwm: pwm0-pwm-pins {
99				pinctrl-single,bits = <0x0 0x0 0x30000000>;
100			};
101
102			pinmux_pwm0_gpio: pwm0-gpio-pins {
103				pinctrl-single,bits = <0x0 0x10000000
104						       0x30000000>;
105			};
106
107			pinmux_pwm1_pwm: pwm1-pwm-pins {
108				pinctrl-single,bits = <0x0 0x0 0xc0000000>;
109			};
110
111			pinmux_pwm1_gpio: pwm1-gpio-pins {
112				pinctrl-single,bits = <0x0 0x40000000
113						       0xc0000000>;
114			};
115
116			pinmux_p0led_an_gpio: p0led-an-gpio-pins {
117				pinctrl-single,bits = <0x4 0x4 0xc>;
118			};
119
120			pinmux_p1led_an_gpio: p1led-an-gpio-pins {
121				pinctrl-single,bits = <0x4 0x10 0x30>;
122			};
123
124			pinmux_p2led_an_gpio: p2led-an-gpio-pins {
125				pinctrl-single,bits = <0x4 0x40 0xc0>;
126			};
127
128			pinmux_p3led_an_gpio: p3led-an-gpio-pins {
129				pinctrl-single,bits = <0x4 0x100 0x300>;
130			};
131
132			pinmux_p4led_an_gpio: p4led-an-gpio-pins {
133				pinctrl-single,bits = <0x4 0x400 0xc00>;
134			};
135		};
136
137		watchdog: watchdog@100 {
138			compatible = "mediatek,mt7621-wdt";
139			reg = <0x100 0x30>;
140
141			resets = <&resetc 8>;
142			reset-names = "wdt";
143
144			interrupt-parent = <&intc>;
145			interrupts = <24>;
146
147			status = "disabled";
148		};
149
150		intc: interrupt-controller@200 {
151			compatible = "ralink,rt2880-intc";
152			reg = <0x200 0x100>;
153
154			interrupt-controller;
155			#interrupt-cells = <1>;
156
157			resets = <&resetc 9>;
158			reset-names = "intc";
159
160			interrupt-parent = <&cpuintc>;
161			interrupts = <2>;
162
163			ralink,intc-registers = <0x9c 0xa0
164						 0x6c 0xa4
165						 0x80 0x78>;
166		};
167
168		memory-controller@300 {
169			compatible = "ralink,mt7620a-memc";
170			reg = <0x300 0x100>;
171		};
172
173		gpio: gpio@600 {
174			compatible = "mediatek,mt7621-gpio";
175			reg = <0x600 0x100>;
176
177			gpio-controller;
178			interrupt-controller;
179			#gpio-cells = <2>;
180			#interrupt-cells = <2>;
181
182			interrupt-parent = <&intc>;
183			interrupts = <6>;
184		};
185
186		spi: spi@b00 {
187			compatible = "ralink,mt7621-spi";
188			reg = <0xb00 0x100>;
189
190			pinctrl-names = "default";
191			pinctrl-0 = <&pinmux_spi_spi>;
192
193			resets = <&resetc 18>;
194			reset-names = "spi";
195
196			#address-cells = <1>;
197			#size-cells = <0>;
198
199			status = "disabled";
200		};
201
202		i2c: i2c@900 {
203			compatible = "mediatek,mt7621-i2c";
204			reg = <0x900 0x100>;
205
206			pinctrl-names = "default";
207			pinctrl-0 = <&pinmux_i2c_i2c>;
208
209			resets = <&resetc 16>;
210			reset-names = "i2c";
211
212			#address-cells = <1>;
213			#size-cells = <0>;
214
215			status = "disabled";
216		};
217
218		uart0: uartlite@c00 {
219			compatible = "ns16550a";
220			reg = <0xc00 0x100>;
221
222			pinctrl-names = "default";
223			pinctrl-0 = <&pinmux_uart0_uart>;
224
225			resets = <&resetc 12>;
226			reset-names = "uart0";
227
228			interrupt-parent = <&intc>;
229			interrupts = <20>;
230
231			reg-shift = <2>;
232		};
233
234		uart1: uart1@d00 {
235			compatible = "ns16550a";
236			reg = <0xd00 0x100>;
237
238			pinctrl-names = "default";
239			pinctrl-0 = <&pinmux_uart1_uart>;
240
241			resets = <&resetc 19>;
242			reset-names = "uart1";
243
244			interrupt-parent = <&intc>;
245			interrupts = <21>;
246
247			reg-shift = <2>;
248		};
249
250		uart2: uart2@e00 {
251			compatible = "ns16550a";
252			reg = <0xe00 0x100>;
253
254			pinctrl-names = "default";
255			pinctrl-0 = <&pinmux_uart2_uart>;
256
257			resets = <&resetc 20>;
258			reset-names = "uart2";
259
260			interrupt-parent = <&intc>;
261			interrupts = <22>;
262
263			reg-shift = <2>;
264		};
265	};
266
267	usb_phy: usb-phy@10120000 {
268		compatible = "mediatek,mt7628-usbphy";
269		reg = <0x10120000 0x1000>;
270
271		#phy-cells = <0>;
272
273		ralink,sysctl = <&sysc>;
274		resets = <&resetc 22 &resetc 25>;
275		reset-names = "host", "device";
276	};
277
278	usb@101c0000 {
279		compatible = "generic-ehci";
280		reg = <0x101c0000 0x1000>;
281
282		phys = <&usb_phy>;
283		phy-names = "usb";
284
285		interrupt-parent = <&intc>;
286		interrupts = <18>;
287	};
288
289	wmac: wmac@10300000 {
290		compatible = "mediatek,mt7628-wmac";
291		reg = <0x10300000 0x100000>;
292
293		interrupt-parent = <&cpuintc>;
294		interrupts = <6>;
295
296		status = "disabled";
297	};
298};
299