xref: /freebsd/sys/contrib/device-tree/src/mips/loongson/loongson64-2k1000.dtsi (revision b197d4b893974c9eb4d7b38704c6d5c486235d6f) 
1// SPDX-License-Identifier: GPL-2.0
2
3/dts-v1/;
4
5#include <dt-bindings/interrupt-controller/irq.h>
6
7/ {
8	compatible = "loongson,loongson2k1000";
9
10	#address-cells = <2>;
11	#size-cells = <2>;
12
13	cpus {
14		#address-cells = <1>;
15		#size-cells = <0>;
16
17		cpu0: cpu@0 {
18			device_type = "cpu";
19			compatible = "loongson,gs264";
20			reg = <0x0>;
21			#clock-cells = <1>;
22			clocks = <&cpu_clk>;
23		};
24	};
25
26	memory@200000 {
27		compatible = "memory";
28		device_type = "memory";
29		reg = <0x00000000 0x00200000 0x00000000 0x0ee00000>, /* 238 MB at 2 MB */
30			<0x00000000 0x20000000 0x00000000 0x1f000000>, /* 496 MB at 512 MB */
31			<0x00000001 0x10000000 0x00000001 0xb0000000>; /* 6912 MB at 4352MB */
32	};
33
34	cpu_clk: cpu_clk {
35		#clock-cells = <0>;
36		compatible = "fixed-clock";
37		clock-frequency = <800000000>;
38	};
39
40	cpuintc: interrupt-controller {
41		#address-cells = <0>;
42		#interrupt-cells = <1>;
43		interrupt-controller;
44		compatible = "mti,cpu-interrupt-controller";
45	};
46
47	package0: bus@10000000 {
48		compatible = "simple-bus";
49		#address-cells = <2>;
50		#size-cells = <2>;
51		ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* ioports */
52			0 0x40000000 0 0x40000000 0 0x40000000
53			0xfe 0x00000000 0xfe 0x00000000 0 0x40000000>;
54
55		pm: reset-controller@1fe07000 {
56			compatible = "loongson,ls2k-pm";
57			reg = <0 0x1fe07000 0 0x422>;
58		};
59
60		liointc0: interrupt-controller@1fe11400 {
61			compatible = "loongson,liointc-2.0";
62			reg = <0 0x1fe11400 0 0x40>,
63				<0 0x1fe11040 0 0x8>,
64				<0 0x1fe11140 0 0x8>;
65			reg-names = "main", "isr0", "isr1";
66
67			interrupt-controller;
68			#interrupt-cells = <2>;
69
70			interrupt-parent = <&cpuintc>;
71			interrupts = <2>;
72			interrupt-names = "int0";
73
74			loongson,parent_int_map = <0xffffffff>, /* int0 */
75						<0x00000000>, /* int1 */
76						<0x00000000>, /* int2 */
77						<0x00000000>; /* int3 */
78		};
79
80		liointc1: interrupt-controller@1fe11440 {
81			compatible = "loongson,liointc-2.0";
82			reg = <0 0x1fe11440 0 0x40>,
83				<0 0x1fe11048 0 0x8>,
84				<0 0x1fe11148 0 0x8>;
85			reg-names = "main", "isr0", "isr1";
86
87			interrupt-controller;
88			#interrupt-cells = <2>;
89
90			interrupt-parent = <&cpuintc>;
91			interrupts = <3>;
92			interrupt-names = "int1";
93
94			loongson,parent_int_map = <0x00000000>, /* int0 */
95						<0xffffffff>, /* int1 */
96						<0x00000000>, /* int2 */
97						<0x00000000>; /* int3 */
98		};
99
100		uart0: serial@1fe00000 {
101			compatible = "ns16550a";
102			reg = <0 0x1fe00000 0 0x8>;
103			clock-frequency = <125000000>;
104			interrupt-parent = <&liointc0>;
105			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
106			no-loopback-test;
107		};
108
109		pci@1a000000 {
110			compatible = "loongson,ls2k-pci";
111			device_type = "pci";
112			#address-cells = <3>;
113			#size-cells = <2>;
114			#interrupt-cells = <2>;
115
116			reg = <0 0x1a000000 0 0x02000000>,
117				<0xfe 0x00000000 0 0x20000000>;
118
119			ranges = <0x01000000 0x0 0x00000000 0x0 0x18000000  0x0 0x00010000>,
120				 <0x02000000 0x0 0x40000000 0x0 0x40000000  0x0 0x40000000>;
121
122			gmac@3,0 {
123				compatible = "pci0014,7a03.0",
124						   "pci0014,7a03",
125						   "pciclass0c0320",
126						   "pciclass0c03",
127						   "loongson, pci-gmac";
128
129				reg = <0x1800 0x0 0x0 0x0 0x0>;
130				interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
131					     <13 IRQ_TYPE_LEVEL_LOW>;
132				interrupt-names = "macirq", "eth_lpi";
133				interrupt-parent = <&liointc0>;
134				phy-mode = "rgmii";
135				mdio {
136					#address-cells = <1>;
137					#size-cells = <0>;
138					compatible = "snps,dwmac-mdio";
139					phy0: ethernet-phy@0 {
140						reg = <0>;
141					};
142				};
143			};
144
145			gmac@3,1 {
146				compatible = "pci0014,7a03.0",
147						   "pci0014,7a03",
148						   "pciclass0c0320",
149						   "pciclass0c03",
150						   "loongson, pci-gmac";
151
152				reg = <0x1900 0x0 0x0 0x0 0x0>;
153				interrupts = <14 IRQ_TYPE_LEVEL_LOW>,
154					     <15 IRQ_TYPE_LEVEL_LOW>;
155				interrupt-names = "macirq", "eth_lpi";
156				interrupt-parent = <&liointc0>;
157				phy-mode = "rgmii";
158				mdio {
159					#address-cells = <1>;
160					#size-cells = <0>;
161					compatible = "snps,dwmac-mdio";
162					phy1: ethernet-phy@1 {
163						reg = <0>;
164					};
165				};
166			};
167
168			ehci@4,1 {
169				compatible = "pci0014,7a14.0",
170						   "pci0014,7a14",
171						   "pciclass0c0320",
172						   "pciclass0c03";
173
174				reg = <0x2100 0x0 0x0 0x0 0x0>;
175				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
176				interrupt-parent = <&liointc1>;
177			};
178
179			ohci@4,2 {
180				compatible = "pci0014,7a24.0",
181						   "pci0014,7a24",
182						   "pciclass0c0310",
183						   "pciclass0c03";
184
185				reg = <0x2200 0x0 0x0 0x0 0x0>;
186				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
187				interrupt-parent = <&liointc1>;
188			};
189
190			sata@8,0 {
191				compatible = "pci0014,7a08.0",
192						   "pci0014,7a08",
193						   "pciclass010601",
194						   "pciclass0106";
195
196				reg = <0x4000 0x0 0x0 0x0 0x0>;
197				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
198				interrupt-parent = <&liointc0>;
199			};
200
201			pci_bridge@9,0 {
202				compatible = "pci0014,7a19.0",
203						   "pci0014,7a19",
204						   "pciclass060400",
205						   "pciclass0604";
206
207				reg = <0x4800 0x0 0x0 0x0 0x0>;
208				#interrupt-cells = <1>;
209				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
210				interrupt-parent = <&liointc1>;
211				interrupt-map-mask = <0 0 0 0>;
212				interrupt-map = <0 0 0 0 &liointc1 0 IRQ_TYPE_LEVEL_LOW>;
213				external-facing;
214			};
215
216			pci_bridge@a,0 {
217				compatible = "pci0014,7a09.0",
218						   "pci0014,7a09",
219						   "pciclass060400",
220						   "pciclass0604";
221
222				reg = <0x5000 0x0 0x0 0x0 0x0>;
223				#interrupt-cells = <1>;
224				interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
225				interrupt-parent = <&liointc1>;
226				interrupt-map-mask = <0 0 0 0>;
227				interrupt-map = <0 0 0 0 &liointc1 1 IRQ_TYPE_LEVEL_LOW>;
228				external-facing;
229			};
230
231			pci_bridge@b,0 {
232				compatible = "pci0014,7a09.0",
233						   "pci0014,7a09",
234						   "pciclass060400",
235						   "pciclass0604";
236
237				reg = <0x5800 0x0 0x0 0x0 0x0>;
238				#interrupt-cells = <1>;
239				interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
240				interrupt-parent = <&liointc1>;
241				interrupt-map-mask = <0 0 0 0>;
242				interrupt-map = <0 0 0 0 &liointc1 2 IRQ_TYPE_LEVEL_LOW>;
243				external-facing;
244			};
245
246			pci_bridge@c,0 {
247				compatible = "pci0014,7a09.0",
248						   "pci0014,7a09",
249						   "pciclass060400",
250						   "pciclass0604";
251
252				reg = <0x6000 0x0 0x0 0x0 0x0>;
253				#interrupt-cells = <1>;
254				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
255				interrupt-parent = <&liointc1>;
256				interrupt-map-mask = <0 0 0 0>;
257				interrupt-map = <0 0 0 0 &liointc1 3 IRQ_TYPE_LEVEL_LOW>;
258				external-facing;
259			};
260
261			pci_bridge@d,0 {
262				compatible = "pci0014,7a19.0",
263						   "pci0014,7a19",
264						   "pciclass060400",
265						   "pciclass0604";
266
267				reg = <0x6800 0x0 0x0 0x0 0x0>;
268				#interrupt-cells = <1>;
269				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
270				interrupt-parent = <&liointc1>;
271				interrupt-map-mask = <0 0 0 0>;
272				interrupt-map = <0 0 0 0 &liointc1 4 IRQ_TYPE_LEVEL_LOW>;
273				external-facing;
274			};
275
276			pci_bridge@e,0 {
277				compatible = "pci0014,7a09.0",
278						   "pci0014,7a09",
279						   "pciclass060400",
280						   "pciclass0604";
281
282				reg = <0x7000 0x0 0x0 0x0 0x0>;
283				#interrupt-cells = <1>;
284				interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
285				interrupt-parent = <&liointc1>;
286				interrupt-map-mask = <0 0 0 0>;
287				interrupt-map = <0 0 0 0 &liointc1 5 IRQ_TYPE_LEVEL_LOW>;
288				external-facing;
289			};
290
291		};
292	};
293};
294
295