1// SPDX-License-Identifier: GPL-2.0 2/ { 3 #address-cells = <1>; 4 #size-cells = <1>; 5 compatible = "brcm,bcm7435"; 6 7 cpus { 8 #address-cells = <1>; 9 #size-cells = <0>; 10 11 mips-hpt-frequency = <175625000>; 12 13 cpu@0 { 14 compatible = "brcm,bmips5200"; 15 device_type = "cpu"; 16 reg = <0>; 17 }; 18 19 cpu@1 { 20 compatible = "brcm,bmips5200"; 21 device_type = "cpu"; 22 reg = <1>; 23 }; 24 25 cpu@2 { 26 compatible = "brcm,bmips5200"; 27 device_type = "cpu"; 28 reg = <2>; 29 }; 30 31 cpu@3 { 32 compatible = "brcm,bmips5200"; 33 device_type = "cpu"; 34 reg = <3>; 35 }; 36 }; 37 38 aliases { 39 uart0 = &uart0; 40 }; 41 42 cpu_intc: interrupt-controller { 43 #address-cells = <0>; 44 compatible = "mti,cpu-interrupt-controller"; 45 46 interrupt-controller; 47 #interrupt-cells = <1>; 48 }; 49 50 clocks { 51 uart_clk: uart_clk { 52 compatible = "fixed-clock"; 53 #clock-cells = <0>; 54 clock-frequency = <81000000>; 55 }; 56 57 upg_clk: upg_clk { 58 compatible = "fixed-clock"; 59 #clock-cells = <0>; 60 clock-frequency = <27000000>; 61 }; 62 }; 63 64 rdb { 65 #address-cells = <1>; 66 #size-cells = <1>; 67 68 compatible = "simple-bus"; 69 ranges = <0 0x10000000 0x01000000>; 70 71 periph_intc: interrupt-controller@41b500 { 72 compatible = "brcm,bcm7038-l1-intc"; 73 reg = <0x41b500 0x40>, <0x41b600 0x40>, 74 <0x41b700 0x40>, <0x41b800 0x40>; 75 76 interrupt-controller; 77 #interrupt-cells = <1>; 78 79 interrupt-parent = <&cpu_intc>; 80 interrupts = <2>, <3>, <2>, <3>; 81 }; 82 83 sun_l2_intc: interrupt-controller@403000 { 84 compatible = "brcm,l2-intc"; 85 reg = <0x403000 0x30>; 86 interrupt-controller; 87 #interrupt-cells = <1>; 88 interrupt-parent = <&periph_intc>; 89 interrupts = <52>; 90 }; 91 92 gisb-arb@400000 { 93 compatible = "brcm,bcm7435-gisb-arb"; 94 reg = <0x400000 0xdc>; 95 native-endian; 96 interrupt-parent = <&sun_l2_intc>; 97 interrupts = <0>, <2>; 98 brcm,gisb-arb-master-mask = <0xf77f>; 99 brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "webcpu_0", 100 "pcie_0", "bsp_0", 101 "rdc_0", "raaga_0", 102 "avd_1", "jtag_0", 103 "svd_0", "vice_0", 104 "vice_1", "raaga_1", 105 "scpu"; 106 }; 107 108 upg_irq0_intc: interrupt-controller@406780 { 109 compatible = "brcm,bcm7120-l2-intc"; 110 reg = <0x406780 0x8>; 111 112 brcm,int-map-mask = <0x44>, <0x7000000>; 113 brcm,int-fwd-mask = <0x70000>; 114 115 interrupt-controller; 116 #interrupt-cells = <1>; 117 118 interrupt-parent = <&periph_intc>; 119 interrupts = <60>, <58>; 120 interrupt-names = "upg_main", "upg_bsc"; 121 }; 122 123 upg_aon_irq0_intc: interrupt-controller@409480 { 124 compatible = "brcm,bcm7120-l2-intc"; 125 reg = <0x409480 0x8>; 126 127 brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>; 128 brcm,int-fwd-mask = <0>; 129 brcm,irq-can-wake; 130 131 interrupt-controller; 132 #interrupt-cells = <1>; 133 134 interrupt-parent = <&periph_intc>; 135 interrupts = <61>, <59>, <64>; 136 interrupt-names = "upg_main_aon", "upg_bsc_aon", 137 "upg_spi"; 138 }; 139 140 sun_top_ctrl: syscon@404000 { 141 compatible = "brcm,bcm7425-sun-top-ctrl", "syscon"; 142 reg = <0x404000 0x51c>; 143 native-endian; 144 }; 145 146 reboot { 147 compatible = "brcm,brcmstb-reboot"; 148 syscon = <&sun_top_ctrl 0x304 0x308>; 149 }; 150 151 uart0: serial@406b00 { 152 compatible = "ns16550a"; 153 reg = <0x406b00 0x20>; 154 reg-io-width = <0x4>; 155 reg-shift = <0x2>; 156 interrupt-parent = <&periph_intc>; 157 interrupts = <66>; 158 clocks = <&uart_clk>; 159 status = "disabled"; 160 }; 161 162 uart1: serial@406b40 { 163 compatible = "ns16550a"; 164 reg = <0x406b40 0x20>; 165 reg-io-width = <0x4>; 166 reg-shift = <0x2>; 167 interrupt-parent = <&periph_intc>; 168 interrupts = <67>; 169 clocks = <&uart_clk>; 170 status = "disabled"; 171 }; 172 173 uart2: serial@406b80 { 174 compatible = "ns16550a"; 175 reg = <0x406b80 0x20>; 176 reg-io-width = <0x4>; 177 reg-shift = <0x2>; 178 interrupt-parent = <&periph_intc>; 179 interrupts = <68>; 180 clocks = <&uart_clk>; 181 status = "disabled"; 182 }; 183 184 bsca: i2c@406300 { 185 clock-frequency = <390000>; 186 compatible = "brcm,brcmstb-i2c"; 187 interrupt-parent = <&upg_irq0_intc>; 188 reg = <0x406300 0x58>; 189 interrupts = <26>; 190 interrupt-names = "upg_bsca"; 191 status = "disabled"; 192 }; 193 194 bscb: i2c@409400 { 195 clock-frequency = <390000>; 196 compatible = "brcm,brcmstb-i2c"; 197 interrupt-parent = <&upg_aon_irq0_intc>; 198 reg = <0x409400 0x58>; 199 interrupts = <28>; 200 interrupt-names = "upg_bscb"; 201 status = "disabled"; 202 }; 203 204 bscc: i2c@406200 { 205 clock-frequency = <390000>; 206 compatible = "brcm,brcmstb-i2c"; 207 interrupt-parent = <&upg_irq0_intc>; 208 reg = <0x406200 0x58>; 209 interrupts = <24>; 210 interrupt-names = "upg_bscc"; 211 status = "disabled"; 212 }; 213 214 bscd: i2c@406280 { 215 clock-frequency = <390000>; 216 compatible = "brcm,brcmstb-i2c"; 217 interrupt-parent = <&upg_irq0_intc>; 218 reg = <0x406280 0x58>; 219 interrupts = <25>; 220 interrupt-names = "upg_bscd"; 221 status = "disabled"; 222 }; 223 224 bsce: i2c@409180 { 225 clock-frequency = <390000>; 226 compatible = "brcm,brcmstb-i2c"; 227 interrupt-parent = <&upg_aon_irq0_intc>; 228 reg = <0x409180 0x58>; 229 interrupts = <27>; 230 interrupt-names = "upg_bsce"; 231 status = "disabled"; 232 }; 233 234 pwma: pwm@406580 { 235 compatible = "brcm,bcm7038-pwm"; 236 reg = <0x406580 0x28>; 237 #pwm-cells = <2>; 238 clocks = <&upg_clk>; 239 status = "disabled"; 240 }; 241 242 pwmb: pwm@406800 { 243 compatible = "brcm,bcm7038-pwm"; 244 reg = <0x406800 0x28>; 245 #pwm-cells = <2>; 246 clocks = <&upg_clk>; 247 status = "disabled"; 248 }; 249 250 watchdog: watchdog@4067e8 { 251 clocks = <&upg_clk>; 252 compatible = "brcm,bcm7038-wdt"; 253 reg = <0x4067e8 0x14>; 254 status = "disabled"; 255 }; 256 257 aon_pm_l2_intc: interrupt-controller@408440 { 258 compatible = "brcm,l2-intc"; 259 reg = <0x408440 0x30>; 260 interrupt-controller; 261 #interrupt-cells = <1>; 262 interrupt-parent = <&periph_intc>; 263 interrupts = <54>; 264 brcm,irq-can-wake; 265 }; 266 267 aon_ctrl: syscon@408000 { 268 compatible = "brcm,brcmstb-aon-ctrl"; 269 reg = <0x408000 0x100>, <0x408200 0x200>; 270 reg-names = "aon-ctrl", "aon-sram"; 271 }; 272 273 timers: timer@4067c0 { 274 compatible = "brcm,brcmstb-timers"; 275 reg = <0x4067c0 0x40>; 276 }; 277 278 upg_gio: gpio@406700 { 279 compatible = "brcm,brcmstb-gpio"; 280 reg = <0x406700 0x80>; 281 #gpio-cells = <2>; 282 #interrupt-cells = <2>; 283 gpio-controller; 284 interrupt-controller; 285 interrupt-parent = <&upg_irq0_intc>; 286 interrupts = <6>; 287 brcm,gpio-bank-widths = <32 32 32 21>; 288 }; 289 290 upg_gio_aon: gpio@4094c0 { 291 compatible = "brcm,brcmstb-gpio"; 292 reg = <0x4094c0 0x40>; 293 #gpio-cells = <2>; 294 #interrupt-cells = <2>; 295 gpio-controller; 296 interrupt-controller; 297 interrupt-parent = <&upg_aon_irq0_intc>; 298 interrupts = <6>; 299 interrupts-extended = <&upg_aon_irq0_intc 6>, 300 <&aon_pm_l2_intc 5>; 301 wakeup-source; 302 brcm,gpio-bank-widths = <18 4>; 303 }; 304 305 enet0: ethernet@b80000 { 306 phy-mode = "internal"; 307 phy-handle = <&phy1>; 308 mac-address = [ 00 10 18 36 23 1a ]; 309 compatible = "brcm,genet-v3"; 310 #address-cells = <0x1>; 311 #size-cells = <0x1>; 312 reg = <0xb80000 0x11c88>; 313 interrupts = <17>, <18>; 314 interrupt-parent = <&periph_intc>; 315 status = "disabled"; 316 317 mdio@e14 { 318 compatible = "brcm,genet-mdio-v3"; 319 #address-cells = <0x1>; 320 #size-cells = <0x0>; 321 reg = <0xe14 0x8>; 322 323 phy1: ethernet-phy@1 { 324 max-speed = <100>; 325 reg = <0x1>; 326 compatible = "brcm,40nm-ephy", 327 "ethernet-phy-ieee802.3-c22"; 328 }; 329 }; 330 }; 331 332 ehci0: usb@480300 { 333 compatible = "brcm,bcm7435-ehci", "generic-ehci"; 334 reg = <0x480300 0x100>; 335 native-endian; 336 interrupt-parent = <&periph_intc>; 337 interrupts = <70>; 338 status = "disabled"; 339 }; 340 341 ohci0: usb@480400 { 342 compatible = "brcm,bcm7435-ohci", "generic-ohci"; 343 reg = <0x480400 0x100>; 344 native-endian; 345 no-big-frame-no; 346 interrupt-parent = <&periph_intc>; 347 interrupts = <72>; 348 status = "disabled"; 349 }; 350 351 ehci1: usb@480500 { 352 compatible = "brcm,bcm7435-ehci", "generic-ehci"; 353 reg = <0x480500 0x100>; 354 native-endian; 355 interrupt-parent = <&periph_intc>; 356 interrupts = <71>; 357 status = "disabled"; 358 }; 359 360 ohci1: usb@480600 { 361 compatible = "brcm,bcm7435-ohci", "generic-ohci"; 362 reg = <0x480600 0x100>; 363 native-endian; 364 no-big-frame-no; 365 interrupt-parent = <&periph_intc>; 366 interrupts = <73>; 367 status = "disabled"; 368 }; 369 370 ehci2: usb@490300 { 371 compatible = "brcm,bcm7435-ehci", "generic-ehci"; 372 reg = <0x490300 0x100>; 373 native-endian; 374 interrupt-parent = <&periph_intc>; 375 interrupts = <75>; 376 status = "disabled"; 377 }; 378 379 ohci2: usb@490400 { 380 compatible = "brcm,bcm7435-ohci", "generic-ohci"; 381 reg = <0x490400 0x100>; 382 native-endian; 383 no-big-frame-no; 384 interrupt-parent = <&periph_intc>; 385 interrupts = <77>; 386 status = "disabled"; 387 }; 388 389 ehci3: usb@490500 { 390 compatible = "brcm,bcm7435-ehci", "generic-ehci"; 391 reg = <0x490500 0x100>; 392 native-endian; 393 interrupt-parent = <&periph_intc>; 394 interrupts = <76>; 395 status = "disabled"; 396 }; 397 398 ohci3: usb@490600 { 399 compatible = "brcm,bcm7435-ohci", "generic-ohci"; 400 reg = <0x490600 0x100>; 401 native-endian; 402 no-big-frame-no; 403 interrupt-parent = <&periph_intc>; 404 interrupts = <78>; 405 status = "disabled"; 406 }; 407 408 hif_l2_intc: interrupt-controller@41b000 { 409 compatible = "brcm,l2-intc"; 410 reg = <0x41b000 0x30>; 411 interrupt-controller; 412 #interrupt-cells = <1>; 413 interrupt-parent = <&periph_intc>; 414 interrupts = <24>; 415 }; 416 417 nand: nand@41c800 { 418 compatible = "brcm,brcmnand-v6.2", "brcm,brcmnand"; 419 #address-cells = <1>; 420 #size-cells = <0>; 421 reg-names = "nand", "flash-dma"; 422 reg = <0x41c800 0x600>, <0x41d000 0x100>; 423 interrupt-parent = <&hif_l2_intc>; 424 interrupts = <24>, <4>; 425 interrupt-names = "nand_ctlrdy", "flash_dma_done"; 426 status = "disabled"; 427 }; 428 429 sata: sata@181000 { 430 compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; 431 reg-names = "ahci", "top-ctrl"; 432 reg = <0x181000 0xa9c>, <0x180020 0x1c>; 433 interrupt-parent = <&periph_intc>; 434 interrupts = <45>; 435 #address-cells = <1>; 436 #size-cells = <0>; 437 status = "disabled"; 438 439 sata0: sata-port@0 { 440 reg = <0>; 441 phys = <&sata_phy0>; 442 }; 443 444 sata1: sata-port@1 { 445 reg = <1>; 446 phys = <&sata_phy1>; 447 }; 448 }; 449 450 sata_phy: sata-phy@180100 { 451 compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; 452 reg = <0x180100 0x0eff>; 453 reg-names = "phy"; 454 #address-cells = <1>; 455 #size-cells = <0>; 456 status = "disabled"; 457 458 sata_phy0: sata-phy@0 { 459 reg = <0>; 460 #phy-cells = <0>; 461 }; 462 463 sata_phy1: sata-phy@1 { 464 reg = <1>; 465 #phy-cells = <0>; 466 }; 467 }; 468 469 sdhci0: sdhci@41a000 { 470 compatible = "brcm,bcm7425-sdhci"; 471 reg = <0x41a000 0x100>; 472 interrupt-parent = <&periph_intc>; 473 interrupts = <47>; 474 sd-uhs-sdr50; 475 mmc-hs200-1_8v; 476 status = "disabled"; 477 }; 478 479 sdhci1: sdhci@41a200 { 480 compatible = "brcm,bcm7425-sdhci"; 481 reg = <0x41a200 0x100>; 482 interrupt-parent = <&periph_intc>; 483 interrupts = <48>; 484 sd-uhs-sdr50; 485 mmc-hs200-1_8v; 486 status = "disabled"; 487 }; 488 489 spi_l2_intc: interrupt-controller@41bd00 { 490 compatible = "brcm,l2-intc"; 491 reg = <0x41bd00 0x30>; 492 interrupt-controller; 493 #interrupt-cells = <1>; 494 interrupt-parent = <&periph_intc>; 495 interrupts = <25>; 496 }; 497 498 qspi: spi@41d200 { 499 #address-cells = <0x1>; 500 #size-cells = <0x0>; 501 compatible = "brcm,spi-bcm-qspi", 502 "brcm,spi-brcmstb-qspi"; 503 clocks = <&upg_clk>; 504 reg = <0x41a920 0x4 0x41d400 0x188 0x41d200 0x50>; 505 reg-names = "cs_reg", "hif_mspi", "bspi"; 506 interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>; 507 interrupt-parent = <&spi_l2_intc>; 508 interrupt-names = "spi_lr_fullness_reached", 509 "spi_lr_session_aborted", 510 "spi_lr_impatient", 511 "spi_lr_session_done", 512 "spi_lr_overread", 513 "mspi_done", 514 "mspi_halted"; 515 status = "disabled"; 516 }; 517 518 mspi: spi@409200 { 519 #address-cells = <1>; 520 #size-cells = <0>; 521 compatible = "brcm,spi-bcm-qspi", 522 "brcm,spi-brcmstb-mspi"; 523 clocks = <&upg_clk>; 524 reg = <0x409200 0x180>; 525 reg-names = "mspi"; 526 interrupts = <0x14>; 527 interrupt-parent = <&upg_aon_irq0_intc>; 528 interrupt-names = "mspi_done"; 529 status = "disabled"; 530 }; 531 532 waketimer: waketimer@409580 { 533 compatible = "brcm,brcmstb-waketimer"; 534 reg = <0x409580 0x14>; 535 interrupts = <0x3>; 536 interrupt-parent = <&aon_pm_l2_intc>; 537 interrupt-names = "timer"; 538 clocks = <&upg_clk>; 539 status = "disabled"; 540 }; 541 }; 542 543 memory_controllers { 544 compatible = "simple-bus"; 545 ranges = <0x0 0x103b0000 0x1a000>; 546 #address-cells = <1>; 547 #size-cells = <1>; 548 549 memory-controller@0 { 550 compatible = "brcm,brcmstb-memc", "simple-bus"; 551 ranges = <0x0 0x0 0xa000>; 552 #address-cells = <1>; 553 #size-cells = <1>; 554 555 memc-arb@1000 { 556 compatible = "brcm,brcmstb-memc-arb"; 557 reg = <0x1000 0x248>; 558 }; 559 560 memc-ddr@2000 { 561 compatible = "brcm,brcmstb-memc-ddr"; 562 reg = <0x2000 0x300>; 563 }; 564 565 ddr-phy@6000 { 566 compatible = "brcm,brcmstb-ddr-phy"; 567 reg = <0x6000 0xc8>; 568 }; 569 570 shimphy@8000 { 571 compatible = "brcm,brcmstb-ddr-shimphy"; 572 reg = <0x8000 0x13c>; 573 }; 574 }; 575 576 memory-controller@1 { 577 compatible = "brcm,brcmstb-memc", "simple-bus"; 578 ranges = <0x0 0x10000 0xa000>; 579 #address-cells = <1>; 580 #size-cells = <1>; 581 582 memc-arb@1000 { 583 compatible = "brcm,brcmstb-memc-arb"; 584 reg = <0x1000 0x248>; 585 }; 586 587 memc-ddr@2000 { 588 compatible = "brcm,brcmstb-memc-ddr"; 589 reg = <0x2000 0x300>; 590 }; 591 592 ddr-phy@6000 { 593 compatible = "brcm,brcmstb-ddr-phy"; 594 reg = <0x6000 0xc8>; 595 }; 596 597 shimphy@8000 { 598 compatible = "brcm,brcmstb-ddr-shimphy"; 599 reg = <0x8000 0x13c>; 600 }; 601 }; 602 }; 603 604 pcie_0: pcie@8b20000 { 605 status = "disabled"; 606 compatible = "brcm,bcm7435-pcie"; 607 608 ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000 609 0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000 610 0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000 611 0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>; 612 613 reg = <0x10410000 0x19310>; 614 aspm-no-l0s; 615 device_type = "pci"; 616 msi-controller; 617 msi-parent = <&pcie_0>; 618 #address-cells = <0x3>; 619 #size-cells = <0x2>; 620 bus-range = <0x0 0xff>; 621 interrupt-map-mask = <0x0 0x0 0x0 0x7>; 622 linux,pci-domain = <0x0>; 623 624 interrupt-parent = <&periph_intc>; 625 interrupts = <39>, <39>; 626 interrupt-names = "pcie", "msi"; 627 #interrupt-cells = <0x1>; 628 interrupt-map = <0 0 0 1 &periph_intc 0x23 629 0 0 0 1 &periph_intc 0x24 630 0 0 0 1 &periph_intc 0x25 631 0 0 0 1 &periph_intc 0x26>; 632 }; 633}; 634