1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * dts file for Xilinx ZynqMP ZCU111 4 * 5 * (C) Copyright 2017 - 2021, Xilinx, Inc. 6 * 7 * Michal Simek <michal.simek@xilinx.com> 8 */ 9 10/dts-v1/; 11 12#include "zynqmp.dtsi" 13#include "zynqmp-clk-ccf.dtsi" 14#include <dt-bindings/input/input.h> 15#include <dt-bindings/gpio/gpio.h> 16#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> 17#include <dt-bindings/phy/phy.h> 18 19/ { 20 model = "ZynqMP ZCU111 RevA"; 21 compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp"; 22 23 aliases { 24 ethernet0 = &gem3; 25 i2c0 = &i2c0; 26 i2c1 = &i2c1; 27 mmc0 = &sdhci1; 28 nvmem0 = &eeprom; 29 rtc0 = &rtc; 30 serial0 = &uart0; 31 serial1 = &dcc; 32 spi0 = &qspi; 33 usb0 = &usb0; 34 }; 35 36 chosen { 37 bootargs = "earlycon"; 38 stdout-path = "serial0:115200n8"; 39 }; 40 41 memory@0 { 42 device_type = "memory"; 43 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; 44 /* Another 4GB connected to PL */ 45 }; 46 47 gpio-keys { 48 compatible = "gpio-keys"; 49 autorepeat; 50 sw19 { 51 label = "sw19"; 52 gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; 53 linux,code = <KEY_DOWN>; 54 wakeup-source; 55 autorepeat; 56 }; 57 }; 58 59 leds { 60 compatible = "gpio-leds"; 61 heartbeat-led { 62 label = "heartbeat"; 63 gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; 64 linux,default-trigger = "heartbeat"; 65 }; 66 }; 67 68 ina226-u67 { 69 compatible = "iio-hwmon"; 70 io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>; 71 }; 72 ina226-u59 { 73 compatible = "iio-hwmon"; 74 io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>; 75 }; 76 ina226-u61 { 77 compatible = "iio-hwmon"; 78 io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>; 79 }; 80 ina226-u60 { 81 compatible = "iio-hwmon"; 82 io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>; 83 }; 84 ina226-u64 { 85 compatible = "iio-hwmon"; 86 io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>; 87 }; 88 ina226-u69 { 89 compatible = "iio-hwmon"; 90 io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>; 91 }; 92 ina226-u66 { 93 compatible = "iio-hwmon"; 94 io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>; 95 }; 96 ina226-u65 { 97 compatible = "iio-hwmon"; 98 io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; 99 }; 100 ina226-u63 { 101 compatible = "iio-hwmon"; 102 io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>; 103 }; 104 ina226-u3 { 105 compatible = "iio-hwmon"; 106 io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>; 107 }; 108 ina226-u71 { 109 compatible = "iio-hwmon"; 110 io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>; 111 }; 112 ina226-u77 { 113 compatible = "iio-hwmon"; 114 io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; 115 }; 116 ina226-u73 { 117 compatible = "iio-hwmon"; 118 io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>; 119 }; 120 ina226-u79 { 121 compatible = "iio-hwmon"; 122 io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; 123 }; 124 125 /* 48MHz reference crystal */ 126 ref48: ref48M { 127 compatible = "fixed-clock"; 128 #clock-cells = <0>; 129 clock-frequency = <48000000>; 130 }; 131}; 132 133&dcc { 134 status = "okay"; 135}; 136 137&fpd_dma_chan1 { 138 status = "okay"; 139}; 140 141&fpd_dma_chan2 { 142 status = "okay"; 143}; 144 145&fpd_dma_chan3 { 146 status = "okay"; 147}; 148 149&fpd_dma_chan4 { 150 status = "okay"; 151}; 152 153&fpd_dma_chan5 { 154 status = "okay"; 155}; 156 157&fpd_dma_chan6 { 158 status = "okay"; 159}; 160 161&fpd_dma_chan7 { 162 status = "okay"; 163}; 164 165&fpd_dma_chan8 { 166 status = "okay"; 167}; 168 169&gem3 { 170 status = "okay"; 171 phy-handle = <&phy0>; 172 phy-mode = "rgmii-id"; 173 pinctrl-names = "default"; 174 pinctrl-0 = <&pinctrl_gem3_default>; 175 phy0: ethernet-phy@c { 176 reg = <0xc>; 177 ti,rx-internal-delay = <0x8>; 178 ti,tx-internal-delay = <0xa>; 179 ti,fifo-depth = <0x1>; 180 ti,dp83867-rxctrl-strap-quirk; 181 }; 182}; 183 184&gpio { 185 status = "okay"; 186 pinctrl-names = "default"; 187 pinctrl-0 = <&pinctrl_gpio_default>; 188}; 189 190&i2c0 { 191 status = "okay"; 192 clock-frequency = <400000>; 193 pinctrl-names = "default", "gpio"; 194 pinctrl-0 = <&pinctrl_i2c0_default>; 195 pinctrl-1 = <&pinctrl_i2c0_gpio>; 196 scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; 197 sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; 198 199 tca6416_u22: gpio@20 { 200 compatible = "ti,tca6416"; 201 reg = <0x20>; 202 gpio-controller; /* interrupt not connected */ 203 #gpio-cells = <2>; 204 /* 205 * IRQ not connected 206 * Lines: 207 * 0 - MAX6643_OT_B 208 * 1 - MAX6643_FANFAIL_B 209 * 2 - MIO26_PMU_INPUT_LS 210 * 4 - SFP_SI5382_INT_ALM 211 * 5 - IIC_MUX_RESET_B 212 * 6 - GEM3_EXP_RESET_B 213 * 10 - FMCP_HSPC_PRSNT_M2C_B 214 * 11 - CLK_SPI_MUX_SEL0 215 * 12 - CLK_SPI_MUX_SEL1 216 * 16 - IRPS5401_ALERT_B 217 * 17 - INA226_PMBUS_ALERT 218 * 3, 7, 13-15 - not connected 219 */ 220 }; 221 222 i2c-mux@75 { /* u23 */ 223 compatible = "nxp,pca9544"; 224 #address-cells = <1>; 225 #size-cells = <0>; 226 reg = <0x75>; 227 i2c@0 { 228 #address-cells = <1>; 229 #size-cells = <0>; 230 reg = <0>; 231 /* PS_PMBUS */ 232 /* PMBUS_ALERT done via pca9544 */ 233 u67: ina226@40 { /* u67 */ 234 compatible = "ti,ina226"; 235 #io-channel-cells = <1>; 236 label = "ina226-u67"; 237 reg = <0x40>; 238 shunt-resistor = <2000>; 239 }; 240 u59: ina226@41 { /* u59 */ 241 compatible = "ti,ina226"; 242 #io-channel-cells = <1>; 243 label = "ina226-u59"; 244 reg = <0x41>; 245 shunt-resistor = <5000>; 246 }; 247 u61: ina226@42 { /* u61 */ 248 compatible = "ti,ina226"; 249 #io-channel-cells = <1>; 250 label = "ina226-u61"; 251 reg = <0x42>; 252 shunt-resistor = <5000>; 253 }; 254 u60: ina226@43 { /* u60 */ 255 compatible = "ti,ina226"; 256 #io-channel-cells = <1>; 257 label = "ina226-u60"; 258 reg = <0x43>; 259 shunt-resistor = <5000>; 260 }; 261 u64: ina226@45 { /* u64 */ 262 compatible = "ti,ina226"; 263 #io-channel-cells = <1>; 264 label = "ina226-u64"; 265 reg = <0x45>; 266 shunt-resistor = <5000>; 267 }; 268 u69: ina226@46 { /* u69 */ 269 compatible = "ti,ina226"; 270 #io-channel-cells = <1>; 271 label = "ina226-u69"; 272 reg = <0x46>; 273 shunt-resistor = <2000>; 274 }; 275 u66: ina226@47 { /* u66 */ 276 compatible = "ti,ina226"; 277 #io-channel-cells = <1>; 278 label = "ina226-u66"; 279 reg = <0x47>; 280 shunt-resistor = <5000>; 281 }; 282 u65: ina226@48 { /* u65 */ 283 compatible = "ti,ina226"; 284 #io-channel-cells = <1>; 285 label = "ina226-u65"; 286 reg = <0x48>; 287 shunt-resistor = <5000>; 288 }; 289 u63: ina226@49 { /* u63 */ 290 compatible = "ti,ina226"; 291 #io-channel-cells = <1>; 292 label = "ina226-u63"; 293 reg = <0x49>; 294 shunt-resistor = <5000>; 295 }; 296 u3: ina226@4a { /* u3 */ 297 compatible = "ti,ina226"; 298 #io-channel-cells = <1>; 299 label = "ina226-u3"; 300 reg = <0x4a>; 301 shunt-resistor = <5000>; 302 }; 303 u71: ina226@4b { /* u71 */ 304 compatible = "ti,ina226"; 305 #io-channel-cells = <1>; 306 label = "ina226-u71"; 307 reg = <0x4b>; 308 shunt-resistor = <5000>; 309 }; 310 u77: ina226@4c { /* u77 */ 311 compatible = "ti,ina226"; 312 #io-channel-cells = <1>; 313 label = "ina226-u77"; 314 reg = <0x4c>; 315 shunt-resistor = <5000>; 316 }; 317 u73: ina226@4d { /* u73 */ 318 compatible = "ti,ina226"; 319 #io-channel-cells = <1>; 320 label = "ina226-u73"; 321 reg = <0x4d>; 322 shunt-resistor = <5000>; 323 }; 324 u79: ina226@4e { /* u79 */ 325 compatible = "ti,ina226"; 326 #io-channel-cells = <1>; 327 label = "ina226-u79"; 328 reg = <0x4e>; 329 shunt-resistor = <5000>; 330 }; 331 }; 332 i2c@1 { 333 #address-cells = <1>; 334 #size-cells = <0>; 335 reg = <1>; 336 /* NC */ 337 }; 338 i2c@2 { 339 #address-cells = <1>; 340 #size-cells = <0>; 341 reg = <2>; 342 irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */ 343 compatible = "infineon,irps5401"; 344 reg = <0x43>; 345 }; 346 irps5401_44: irps5401@44 { /* IRPS5401 - u55 */ 347 compatible = "infineon,irps5401"; 348 reg = <0x44>; 349 }; 350 irps5401_45: irps5401@45 { /* IRPS5401 - u57 */ 351 compatible = "infineon,irps5401"; 352 reg = <0x45>; 353 }; 354 /* u68 IR38064 +0 */ 355 /* u70 IR38060 +1 */ 356 /* u74 IR38060 +2 */ 357 /* u75 IR38060 +6 */ 358 /* J19 header too */ 359 360 }; 361 i2c@3 { 362 #address-cells = <1>; 363 #size-cells = <0>; 364 reg = <3>; 365 /* SYSMON */ 366 }; 367 }; 368}; 369 370&i2c1 { 371 status = "okay"; 372 clock-frequency = <400000>; 373 pinctrl-names = "default", "gpio"; 374 pinctrl-0 = <&pinctrl_i2c1_default>; 375 pinctrl-1 = <&pinctrl_i2c1_gpio>; 376 scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; 377 sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; 378 379 i2c-mux@74 { /* u26 */ 380 compatible = "nxp,pca9548"; 381 #address-cells = <1>; 382 #size-cells = <0>; 383 reg = <0x74>; 384 i2c@0 { 385 #address-cells = <1>; 386 #size-cells = <0>; 387 reg = <0>; 388 /* 389 * IIC_EEPROM 1kB memory which uses 256B blocks 390 * where every block has different address. 391 * 0 - 256B address 0x54 392 * 256B - 512B address 0x55 393 * 512B - 768B address 0x56 394 * 768B - 1024B address 0x57 395 */ 396 eeprom: eeprom@54 { /* u88 */ 397 compatible = "atmel,24c08"; 398 reg = <0x54>; 399 }; 400 }; 401 i2c@1 { 402 #address-cells = <1>; 403 #size-cells = <0>; 404 reg = <1>; 405 si5341: clock-generator@36 { /* SI5341 - u46 */ 406 compatible = "silabs,si5341"; 407 reg = <0x36>; 408 #clock-cells = <2>; 409 #address-cells = <1>; 410 #size-cells = <0>; 411 clocks = <&ref48>; 412 clock-names = "xtal"; 413 clock-output-names = "si5341"; 414 415 si5341_0: out@0 { 416 /* refclk0 for PS-GT, used for DP */ 417 reg = <0>; 418 always-on; 419 }; 420 si5341_2: out@2 { 421 /* refclk2 for PS-GT, used for USB3 */ 422 reg = <2>; 423 always-on; 424 }; 425 si5341_3: out@3 { 426 /* refclk3 for PS-GT, used for SATA */ 427 reg = <3>; 428 always-on; 429 }; 430 si5341_5: out@5 { 431 /* refclk5 PL CLK100 */ 432 reg = <5>; 433 always-on; 434 }; 435 si5341_6: out@6 { 436 /* refclk6 PL CLK125 */ 437 reg = <6>; 438 always-on; 439 }; 440 si5341_9: out@9 { 441 /* refclk9 used for PS_REF_CLK 33.3 MHz */ 442 reg = <9>; 443 always-on; 444 }; 445 }; 446 }; 447 i2c@2 { 448 #address-cells = <1>; 449 #size-cells = <0>; 450 reg = <2>; 451 si570_1: clock-generator@5d { /* USER SI570 - u47 */ 452 #clock-cells = <0>; 453 compatible = "silabs,si570"; 454 reg = <0x5d>; 455 temperature-stability = <50>; 456 factory-fout = <300000000>; 457 clock-frequency = <300000000>; 458 clock-output-names = "si570_user"; 459 }; 460 }; 461 i2c@3 { 462 #address-cells = <1>; 463 #size-cells = <0>; 464 reg = <3>; 465 si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */ 466 #clock-cells = <0>; 467 compatible = "silabs,si570"; 468 reg = <0x5d>; 469 temperature-stability = <50>; 470 factory-fout = <156250000>; 471 clock-frequency = <156250000>; 472 clock-output-names = "si570_mgt"; 473 }; 474 }; 475 i2c@4 { 476 #address-cells = <1>; 477 #size-cells = <0>; 478 reg = <4>; 479 /* SI5382 - u48 */ 480 }; 481 i2c@5 { 482 #address-cells = <1>; 483 #size-cells = <0>; 484 reg = <5>; 485 sc18is603@2f { /* sc18is602 - u93 */ 486 compatible = "nxp,sc18is603"; 487 reg = <0x2f>; 488 /* 4 gpios for CS not handled by driver */ 489 /* 490 * USB2ANY cable or 491 * LMK04208 - u90 or 492 * LMX2594 - u102 or 493 * LMX2594 - u103 or 494 * LMX2594 - u104 495 */ 496 }; 497 }; 498 i2c@6 { 499 #address-cells = <1>; 500 #size-cells = <0>; 501 reg = <6>; 502 /* FMC connector */ 503 }; 504 /* 7 NC */ 505 }; 506 507 i2c-mux@75 { 508 compatible = "nxp,pca9548"; /* u27 */ 509 #address-cells = <1>; 510 #size-cells = <0>; 511 reg = <0x75>; 512 513 i2c@0 { 514 #address-cells = <1>; 515 #size-cells = <0>; 516 reg = <0>; 517 /* FMCP_HSPC_IIC */ 518 }; 519 i2c@1 { 520 #address-cells = <1>; 521 #size-cells = <0>; 522 reg = <1>; 523 /* NC */ 524 }; 525 i2c@2 { 526 #address-cells = <1>; 527 #size-cells = <0>; 528 reg = <2>; 529 /* SYSMON */ 530 }; 531 i2c@3 { 532 #address-cells = <1>; 533 #size-cells = <0>; 534 reg = <3>; 535 /* DDR4 SODIMM */ 536 }; 537 i2c@4 { 538 #address-cells = <1>; 539 #size-cells = <0>; 540 reg = <4>; 541 /* SFP3 */ 542 }; 543 i2c@5 { 544 #address-cells = <1>; 545 #size-cells = <0>; 546 reg = <5>; 547 /* SFP2 */ 548 }; 549 i2c@6 { 550 #address-cells = <1>; 551 #size-cells = <0>; 552 reg = <6>; 553 /* SFP1 */ 554 }; 555 i2c@7 { 556 #address-cells = <1>; 557 #size-cells = <0>; 558 reg = <7>; 559 /* SFP0 */ 560 }; 561 }; 562}; 563 564&pinctrl0 { 565 status = "okay"; 566 pinctrl_i2c0_default: i2c0-default { 567 mux { 568 groups = "i2c0_3_grp"; 569 function = "i2c0"; 570 }; 571 572 conf { 573 groups = "i2c0_3_grp"; 574 bias-pull-up; 575 slew-rate = <SLEW_RATE_SLOW>; 576 power-source = <IO_STANDARD_LVCMOS18>; 577 }; 578 }; 579 580 pinctrl_i2c0_gpio: i2c0-gpio { 581 mux { 582 groups = "gpio0_14_grp", "gpio0_15_grp"; 583 function = "gpio0"; 584 }; 585 586 conf { 587 groups = "gpio0_14_grp", "gpio0_15_grp"; 588 slew-rate = <SLEW_RATE_SLOW>; 589 power-source = <IO_STANDARD_LVCMOS18>; 590 }; 591 }; 592 593 pinctrl_i2c1_default: i2c1-default { 594 mux { 595 groups = "i2c1_4_grp"; 596 function = "i2c1"; 597 }; 598 599 conf { 600 groups = "i2c1_4_grp"; 601 bias-pull-up; 602 slew-rate = <SLEW_RATE_SLOW>; 603 power-source = <IO_STANDARD_LVCMOS18>; 604 }; 605 }; 606 607 pinctrl_i2c1_gpio: i2c1-gpio { 608 mux { 609 groups = "gpio0_16_grp", "gpio0_17_grp"; 610 function = "gpio0"; 611 }; 612 613 conf { 614 groups = "gpio0_16_grp", "gpio0_17_grp"; 615 slew-rate = <SLEW_RATE_SLOW>; 616 power-source = <IO_STANDARD_LVCMOS18>; 617 }; 618 }; 619 620 pinctrl_uart0_default: uart0-default { 621 mux { 622 groups = "uart0_4_grp"; 623 function = "uart0"; 624 }; 625 626 conf { 627 groups = "uart0_4_grp"; 628 slew-rate = <SLEW_RATE_SLOW>; 629 power-source = <IO_STANDARD_LVCMOS18>; 630 }; 631 632 conf-rx { 633 pins = "MIO18"; 634 bias-high-impedance; 635 }; 636 637 conf-tx { 638 pins = "MIO19"; 639 bias-disable; 640 }; 641 }; 642 643 pinctrl_usb0_default: usb0-default { 644 mux { 645 groups = "usb0_0_grp"; 646 function = "usb0"; 647 }; 648 649 conf { 650 groups = "usb0_0_grp"; 651 slew-rate = <SLEW_RATE_SLOW>; 652 power-source = <IO_STANDARD_LVCMOS18>; 653 }; 654 655 conf-rx { 656 pins = "MIO52", "MIO53", "MIO55"; 657 bias-high-impedance; 658 }; 659 660 conf-tx { 661 pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", 662 "MIO60", "MIO61", "MIO62", "MIO63"; 663 bias-disable; 664 }; 665 }; 666 667 pinctrl_gem3_default: gem3-default { 668 mux { 669 function = "ethernet3"; 670 groups = "ethernet3_0_grp"; 671 }; 672 673 conf { 674 groups = "ethernet3_0_grp"; 675 slew-rate = <SLEW_RATE_SLOW>; 676 power-source = <IO_STANDARD_LVCMOS18>; 677 }; 678 679 conf-rx { 680 pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", 681 "MIO75"; 682 bias-high-impedance; 683 low-power-disable; 684 }; 685 686 conf-tx { 687 pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", 688 "MIO69"; 689 bias-disable; 690 low-power-enable; 691 }; 692 693 mux-mdio { 694 function = "mdio3"; 695 groups = "mdio3_0_grp"; 696 }; 697 698 conf-mdio { 699 groups = "mdio3_0_grp"; 700 slew-rate = <SLEW_RATE_SLOW>; 701 power-source = <IO_STANDARD_LVCMOS18>; 702 bias-disable; 703 }; 704 }; 705 706 pinctrl_sdhci1_default: sdhci1-default { 707 mux { 708 groups = "sdio1_0_grp"; 709 function = "sdio1"; 710 }; 711 712 conf { 713 groups = "sdio1_0_grp"; 714 slew-rate = <SLEW_RATE_SLOW>; 715 power-source = <IO_STANDARD_LVCMOS18>; 716 bias-disable; 717 }; 718 719 mux-cd { 720 groups = "sdio1_cd_0_grp"; 721 function = "sdio1_cd"; 722 }; 723 724 conf-cd { 725 groups = "sdio1_cd_0_grp"; 726 bias-high-impedance; 727 bias-pull-up; 728 slew-rate = <SLEW_RATE_SLOW>; 729 power-source = <IO_STANDARD_LVCMOS18>; 730 }; 731 }; 732 733 pinctrl_gpio_default: gpio-default { 734 mux { 735 function = "gpio0"; 736 groups = "gpio0_22_grp", "gpio0_23_grp"; 737 }; 738 739 conf { 740 groups = "gpio0_22_grp", "gpio0_23_grp"; 741 slew-rate = <SLEW_RATE_SLOW>; 742 power-source = <IO_STANDARD_LVCMOS18>; 743 }; 744 745 mux-msp { 746 function = "gpio0"; 747 groups = "gpio0_13_grp", "gpio0_38_grp"; 748 }; 749 750 conf-msp { 751 groups = "gpio0_13_grp", "gpio0_38_grp"; 752 slew-rate = <SLEW_RATE_SLOW>; 753 power-source = <IO_STANDARD_LVCMOS18>; 754 }; 755 756 conf-pull-up { 757 pins = "MIO22"; 758 bias-pull-up; 759 }; 760 761 conf-pull-none { 762 pins = "MIO13", "MIO23", "MIO38"; 763 bias-disable; 764 }; 765 }; 766}; 767 768&psgtr { 769 status = "okay"; 770 /* nc, dp, usb3, sata */ 771 clocks = <&si5341 0 0>, <&si5341 0 2>, <&si5341 0 3>; 772 clock-names = "ref1", "ref2", "ref3"; 773}; 774 775&qspi { 776 status = "okay"; 777 flash@0 { 778 compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */ 779 #address-cells = <1>; 780 #size-cells = <1>; 781 reg = <0x0>; 782 spi-tx-bus-width = <1>; 783 spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */ 784 spi-max-frequency = <108000000>; /* Based on DC1 spec */ 785 }; 786}; 787 788&rtc { 789 status = "okay"; 790}; 791 792&sata { 793 status = "okay"; 794 /* SATA OOB timing settings */ 795 ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 796 ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 797 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 798 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 799 ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 800 ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 801 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 802 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 803 phy-names = "sata-phy"; 804 phys = <&psgtr 3 PHY_TYPE_SATA 1 3>; 805}; 806 807/* SD1 with level shifter */ 808&sdhci1 { 809 status = "okay"; 810 pinctrl-names = "default"; 811 pinctrl-0 = <&pinctrl_sdhci1_default>; 812 disable-wp; 813 /* 814 * This property should be removed for supporting UHS mode 815 */ 816 no-1-8-v; 817 xlnx,mio-bank = <1>; 818}; 819 820&uart0 { 821 status = "okay"; 822 pinctrl-names = "default"; 823 pinctrl-0 = <&pinctrl_uart0_default>; 824}; 825 826/* ULPI SMSC USB3320 */ 827&usb0 { 828 status = "okay"; 829 pinctrl-names = "default"; 830 pinctrl-0 = <&pinctrl_usb0_default>; 831 phy-names = "usb3-phy"; 832 phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; 833}; 834 835&dwc3_0 { 836 status = "okay"; 837 dr_mode = "host"; 838 snps,usb3_lpm_capable; 839 maximum-speed = "super-speed"; 840}; 841 842&zynqmp_dpdma { 843 status = "okay"; 844}; 845 846&zynqmp_dpsub { 847 status = "okay"; 848 phy-names = "dp-phy0", "dp-phy1"; 849 phys = <&psgtr 1 PHY_TYPE_DP 0 1>, 850 <&psgtr 0 PHY_TYPE_DP 1 1>; 851}; 852