1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * dts file for Xilinx ZynqMP ZCU104 4 * 5 * (C) Copyright 2017 - 2022, Xilinx, Inc. 6 * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. 7 * 8 * Michal Simek <michal.simek@amd.com> 9 */ 10 11/dts-v1/; 12 13#include "zynqmp.dtsi" 14#include "zynqmp-clk-ccf.dtsi" 15#include <dt-bindings/gpio/gpio.h> 16#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> 17#include <dt-bindings/phy/phy.h> 18 19/ { 20 model = "ZynqMP ZCU104 RevA"; 21 compatible = "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104", "xlnx,zynqmp"; 22 23 aliases { 24 ethernet0 = &gem3; 25 i2c0 = &i2c1; 26 mmc0 = &sdhci1; 27 nvmem0 = &eeprom; 28 rtc0 = &rtc; 29 serial0 = &uart0; 30 serial1 = &uart1; 31 serial2 = &dcc; 32 spi0 = &qspi; 33 usb0 = &usb0; 34 }; 35 36 chosen { 37 bootargs = "earlycon"; 38 stdout-path = "serial0:115200n8"; 39 }; 40 41 memory@0 { 42 device_type = "memory"; 43 reg = <0x0 0x0 0x0 0x80000000>; 44 }; 45 46 clock_8t49n287_5: clk125 { 47 compatible = "fixed-clock"; 48 #clock-cells = <0>; 49 clock-frequency = <125000000>; 50 }; 51 52 clock_8t49n287_2: clk26 { 53 compatible = "fixed-clock"; 54 #clock-cells = <0>; 55 clock-frequency = <26000000>; 56 }; 57 58 clock_8t49n287_3: clk27 { 59 compatible = "fixed-clock"; 60 #clock-cells = <0>; 61 clock-frequency = <27000000>; 62 }; 63}; 64 65&can1 { 66 status = "okay"; 67 pinctrl-names = "default"; 68 pinctrl-0 = <&pinctrl_can1_default>; 69}; 70 71&dcc { 72 status = "okay"; 73}; 74 75&fpd_dma_chan1 { 76 status = "okay"; 77}; 78 79&fpd_dma_chan2 { 80 status = "okay"; 81}; 82 83&fpd_dma_chan3 { 84 status = "okay"; 85}; 86 87&fpd_dma_chan4 { 88 status = "okay"; 89}; 90 91&fpd_dma_chan5 { 92 status = "okay"; 93}; 94 95&fpd_dma_chan6 { 96 status = "okay"; 97}; 98 99&fpd_dma_chan7 { 100 status = "okay"; 101}; 102 103&fpd_dma_chan8 { 104 status = "okay"; 105}; 106 107&gem3 { 108 status = "okay"; 109 phy-handle = <&phy0>; 110 phy-mode = "rgmii-id"; 111 pinctrl-names = "default"; 112 pinctrl-0 = <&pinctrl_gem3_default>; 113 mdio: mdio { 114 #address-cells = <1>; 115 #size-cells = <0>; 116 phy0: ethernet-phy@c { 117 #phy-cells = <1>; 118 compatible = "ethernet-phy-id2000.a231"; 119 reg = <0xc>; 120 ti,rx-internal-delay = <0x8>; 121 ti,tx-internal-delay = <0xa>; 122 ti,fifo-depth = <0x1>; 123 ti,dp83867-rxctrl-strap-quirk; 124 reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>; 125 }; 126 }; 127}; 128 129&gpio { 130 status = "okay"; 131}; 132 133&gpu { 134 status = "okay"; 135}; 136 137&i2c1 { 138 status = "okay"; 139 clock-frequency = <400000>; 140 pinctrl-names = "default", "gpio"; 141 pinctrl-0 = <&pinctrl_i2c1_default>; 142 pinctrl-1 = <&pinctrl_i2c1_gpio>; 143 scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 144 sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 145 146 /* Another connection to this bus via PL i2c via PCA9306 - u45 */ 147 i2c-mux@74 { /* u34 */ 148 compatible = "nxp,pca9548"; 149 #address-cells = <1>; 150 #size-cells = <0>; 151 reg = <0x74>; 152 i2c@0 { 153 #address-cells = <1>; 154 #size-cells = <0>; 155 reg = <0>; 156 /* 157 * IIC_EEPROM 1kB memory which uses 256B blocks 158 * where every block has different address. 159 * 0 - 256B address 0x54 160 * 256B - 512B address 0x55 161 * 512B - 768B address 0x56 162 * 768B - 1024B address 0x57 163 */ 164 eeprom: eeprom@54 { /* u23 */ 165 compatible = "atmel,24c08"; 166 reg = <0x54>; 167 #address-cells = <1>; 168 #size-cells = <1>; 169 }; 170 }; 171 172 i2c@1 { 173 #address-cells = <1>; 174 #size-cells = <0>; 175 reg = <1>; 176 /* 8T49N287 - u182 */ 177 }; 178 179 i2c@2 { 180 #address-cells = <1>; 181 #size-cells = <0>; 182 reg = <2>; 183 irps5401_43: irps5401@43 { /* IRPS5401 - u175 */ 184 compatible = "infineon,irps5401"; 185 reg = <0x43>; /* pmbus / i2c 0x13 */ 186 }; 187 irps5401_44: irps5401@44 { /* IRPS5401 - u180 */ 188 compatible = "infineon,irps5401"; 189 reg = <0x44>; /* pmbus / i2c 0x14 */ 190 }; 191 }; 192 193 i2c@4 { 194 #address-cells = <1>; 195 #size-cells = <0>; 196 reg = <4>; 197 tca6416_u97: gpio@20 { 198 compatible = "ti,tca6416"; 199 reg = <0x20>; 200 gpio-controller; 201 #gpio-cells = <2>; 202 /* 203 * IRQ not connected 204 * Lines: 205 * 0 - IRPS5401_ALERT_B 206 * 1 - HDMI_8T49N241_INT_ALM 207 * 2 - MAX6643_OT_B 208 * 3 - MAX6643_FANFAIL_B 209 * 5 - IIC_MUX_RESET_B 210 * 6 - GEM3_EXP_RESET_B 211 * 7 - FMC_LPC_PRSNT_M2C_B 212 * 4, 10 - 17 - not connected 213 */ 214 }; 215 }; 216 217 i2c@5 { 218 #address-cells = <1>; 219 #size-cells = <0>; 220 reg = <5>; 221 }; 222 223 i2c@7 { 224 #address-cells = <1>; 225 #size-cells = <0>; 226 reg = <7>; 227 }; 228 229 /* 3, 6 not connected */ 230 }; 231}; 232 233&pinctrl0 { 234 status = "okay"; 235 236 pinctrl_can1_default: can1-default { 237 mux { 238 function = "can1"; 239 groups = "can1_6_grp"; 240 }; 241 242 conf { 243 groups = "can1_6_grp"; 244 slew-rate = <SLEW_RATE_SLOW>; 245 power-source = <IO_STANDARD_LVCMOS18>; 246 drive-strength = <12>; 247 }; 248 249 conf-rx { 250 pins = "MIO25"; 251 bias-high-impedance; 252 }; 253 254 conf-tx { 255 pins = "MIO24"; 256 bias-disable; 257 }; 258 }; 259 260 pinctrl_i2c1_default: i2c1-default { 261 mux { 262 groups = "i2c1_4_grp"; 263 function = "i2c1"; 264 }; 265 266 conf { 267 groups = "i2c1_4_grp"; 268 bias-pull-up; 269 slew-rate = <SLEW_RATE_SLOW>; 270 power-source = <IO_STANDARD_LVCMOS18>; 271 drive-strength = <12>; 272 }; 273 }; 274 275 pinctrl_i2c1_gpio: i2c1-gpio { 276 mux { 277 groups = "gpio0_16_grp", "gpio0_17_grp"; 278 function = "gpio0"; 279 }; 280 281 conf { 282 groups = "gpio0_16_grp", "gpio0_17_grp"; 283 slew-rate = <SLEW_RATE_SLOW>; 284 power-source = <IO_STANDARD_LVCMOS18>; 285 drive-strength = <12>; 286 }; 287 }; 288 289 pinctrl_gem3_default: gem3-default { 290 mux { 291 function = "ethernet3"; 292 groups = "ethernet3_0_grp"; 293 }; 294 295 conf { 296 groups = "ethernet3_0_grp"; 297 slew-rate = <SLEW_RATE_SLOW>; 298 power-source = <IO_STANDARD_LVCMOS18>; 299 drive-strength = <12>; 300 }; 301 302 conf-rx { 303 pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", 304 "MIO75"; 305 bias-high-impedance; 306 low-power-disable; 307 }; 308 309 conf-tx { 310 pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", 311 "MIO69"; 312 bias-disable; 313 low-power-enable; 314 }; 315 316 mux-mdio { 317 function = "mdio3"; 318 groups = "mdio3_0_grp"; 319 }; 320 321 conf-mdio { 322 groups = "mdio3_0_grp"; 323 slew-rate = <SLEW_RATE_SLOW>; 324 power-source = <IO_STANDARD_LVCMOS18>; 325 bias-disable; 326 }; 327 }; 328 329 pinctrl_sdhci1_default: sdhci1-default { 330 mux { 331 groups = "sdio1_0_grp"; 332 function = "sdio1"; 333 }; 334 335 conf { 336 groups = "sdio1_0_grp"; 337 slew-rate = <SLEW_RATE_SLOW>; 338 power-source = <IO_STANDARD_LVCMOS18>; 339 bias-disable; 340 drive-strength = <12>; 341 }; 342 343 mux-cd { 344 groups = "sdio1_cd_0_grp"; 345 function = "sdio1_cd"; 346 }; 347 348 conf-cd { 349 groups = "sdio1_cd_0_grp"; 350 bias-high-impedance; 351 bias-pull-up; 352 slew-rate = <SLEW_RATE_SLOW>; 353 power-source = <IO_STANDARD_LVCMOS18>; 354 }; 355 }; 356 357 pinctrl_uart0_default: uart0-default { 358 mux { 359 groups = "uart0_4_grp"; 360 function = "uart0"; 361 }; 362 363 conf { 364 groups = "uart0_4_grp"; 365 slew-rate = <SLEW_RATE_SLOW>; 366 power-source = <IO_STANDARD_LVCMOS18>; 367 drive-strength = <12>; 368 }; 369 370 conf-rx { 371 pins = "MIO18"; 372 bias-high-impedance; 373 }; 374 375 conf-tx { 376 pins = "MIO19"; 377 bias-disable; 378 }; 379 }; 380 381 pinctrl_uart1_default: uart1-default { 382 mux { 383 groups = "uart1_5_grp"; 384 function = "uart1"; 385 }; 386 387 conf { 388 groups = "uart1_5_grp"; 389 slew-rate = <SLEW_RATE_SLOW>; 390 power-source = <IO_STANDARD_LVCMOS18>; 391 drive-strength = <12>; 392 }; 393 394 conf-rx { 395 pins = "MIO21"; 396 bias-high-impedance; 397 }; 398 399 conf-tx { 400 pins = "MIO20"; 401 bias-disable; 402 }; 403 }; 404 405 pinctrl_usb0_default: usb0-default { 406 mux { 407 groups = "usb0_0_grp"; 408 function = "usb0"; 409 }; 410 411 conf { 412 groups = "usb0_0_grp"; 413 power-source = <IO_STANDARD_LVCMOS18>; 414 }; 415 416 conf-rx { 417 pins = "MIO52", "MIO53", "MIO55"; 418 bias-high-impedance; 419 drive-strength = <12>; 420 slew-rate = <SLEW_RATE_FAST>; 421 }; 422 423 conf-tx { 424 pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", 425 "MIO60", "MIO61", "MIO62", "MIO63"; 426 bias-disable; 427 drive-strength = <4>; 428 slew-rate = <SLEW_RATE_SLOW>; 429 }; 430 }; 431}; 432 433&psgtr { 434 status = "okay"; 435 /* nc, sata, usb3, dp */ 436 clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>; 437 clock-names = "ref1", "ref2", "ref3"; 438}; 439 440&qspi { 441 status = "okay"; 442 flash@0 { 443 compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */ 444 #address-cells = <1>; 445 #size-cells = <1>; 446 reg = <0x0>; 447 spi-tx-bus-width = <4>; 448 spi-rx-bus-width = <4>; 449 spi-max-frequency = <108000000>; /* Based on DC1 spec */ 450 }; 451}; 452 453&rtc { 454 status = "okay"; 455}; 456 457&sata { 458 status = "okay"; 459 /* SATA OOB timing settings */ 460 ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 461 ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 462 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 463 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 464 ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; 465 ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; 466 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 467 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 468 phy-names = "sata-phy"; 469 phys = <&psgtr 3 PHY_TYPE_SATA 1 1>; 470}; 471 472/* SD1 with level shifter */ 473&sdhci1 { 474 status = "okay"; 475 no-1-8-v; 476 pinctrl-names = "default"; 477 pinctrl-0 = <&pinctrl_sdhci1_default>; 478 xlnx,mio-bank = <1>; 479 disable-wp; 480}; 481 482&uart0 { 483 status = "okay"; 484 pinctrl-names = "default"; 485 pinctrl-0 = <&pinctrl_uart0_default>; 486}; 487 488&uart1 { 489 status = "okay"; 490 pinctrl-names = "default"; 491 pinctrl-0 = <&pinctrl_uart1_default>; 492}; 493 494/* ULPI SMSC USB3320 */ 495&usb0 { 496 status = "okay"; 497 pinctrl-names = "default"; 498 pinctrl-0 = <&pinctrl_usb0_default>; 499 phy-names = "usb3-phy"; 500 phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; 501}; 502 503&dwc3_0 { 504 status = "okay"; 505 dr_mode = "host"; 506 snps,usb3_lpm_capable; 507 maximum-speed = "super-speed"; 508}; 509 510&watchdog0 { 511 status = "okay"; 512}; 513 514&xilinx_ams { 515 status = "okay"; 516}; 517 518&ams_ps { 519 status = "okay"; 520}; 521 522&ams_pl { 523 status = "okay"; 524}; 525 526&zynqmp_dpdma { 527 status = "okay"; 528}; 529 530&zynqmp_dpsub { 531 status = "okay"; 532 phy-names = "dp-phy0", "dp-phy1"; 533 phys = <&psgtr 1 PHY_TYPE_DP 0 3>, 534 <&psgtr 0 PHY_TYPE_DP 1 3>; 535}; 536