xref: /freebsd/sys/contrib/device-tree/src/arm64/ti/k3-j784s4-mcu-wakeup.dtsi (revision a0ca4af9455b844c5e094fc1b09b1390ffa979fc)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for J784S4 SoC Family MCU/WAKEUP Domain peripherals
4 *
5 * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
6 */
7
8&cbass_mcu_wakeup {
9	sms: system-controller@44083000 {
10		bootph-all;
11		compatible = "ti,k2g-sci";
12		ti,host-id = <12>;
13
14		mbox-names = "rx", "tx";
15
16		mboxes = <&secure_proxy_main 11>,
17			 <&secure_proxy_main 13>;
18
19		reg-names = "debug_messages";
20		reg = <0x00 0x44083000 0x00 0x1000>;
21
22		k3_pds: power-controller {
23			bootph-all;
24			compatible = "ti,sci-pm-domain";
25			#power-domain-cells = <2>;
26		};
27
28		k3_clks: clock-controller {
29			bootph-all;
30			compatible = "ti,k2g-sci-clk";
31			#clock-cells = <2>;
32		};
33
34		k3_reset: reset-controller {
35			bootph-all;
36			compatible = "ti,sci-reset";
37			#reset-cells = <2>;
38		};
39	};
40
41	wkup_conf: bus@43000000 {
42		bootph-all;
43		compatible = "simple-bus";
44		#address-cells = <1>;
45		#size-cells = <1>;
46		ranges = <0x0 0x00 0x43000000 0x20000>;
47
48		chipid: chipid@14 {
49			bootph-all;
50			compatible = "ti,am654-chipid";
51			reg = <0x14 0x4>;
52		};
53	};
54
55	secure_proxy_sa3: mailbox@43600000 {
56		compatible = "ti,am654-secure-proxy";
57		#mbox-cells = <1>;
58		reg-names = "target_data", "rt", "scfg";
59		reg = <0x00 0x43600000 0x00 0x10000>,
60		      <0x00 0x44880000 0x00 0x20000>,
61		      <0x00 0x44860000 0x00 0x20000>;
62		/*
63		 * Marked Disabled:
64		 * Node is incomplete as it is meant for bootloaders and
65		 * firmware on non-MPU processors
66		 */
67		status = "disabled";
68	};
69
70	mcu_ram: sram@41c00000 {
71		compatible = "mmio-sram";
72		reg = <0x00 0x41c00000 0x00 0x100000>;
73		ranges = <0x00 0x00 0x41c00000 0x100000>;
74		#address-cells = <1>;
75		#size-cells = <1>;
76	};
77
78	wkup_pmx0: pinctrl@4301c000 {
79		compatible = "pinctrl-single";
80		/* Proxy 0 addressing */
81		reg = <0x00 0x4301c000 0x00 0x034>;
82		#pinctrl-cells = <1>;
83		pinctrl-single,register-width = <32>;
84		pinctrl-single,function-mask = <0xffffffff>;
85	};
86
87	wkup_pmx1: pinctrl@4301c038 {
88		compatible = "pinctrl-single";
89		/* Proxy 0 addressing */
90		reg = <0x00 0x4301c038 0x00 0x02c>;
91		#pinctrl-cells = <1>;
92		pinctrl-single,register-width = <32>;
93		pinctrl-single,function-mask = <0xffffffff>;
94	};
95
96	wkup_pmx2: pinctrl@4301c068 {
97		compatible = "pinctrl-single";
98		/* Proxy 0 addressing */
99		reg = <0x00 0x4301c068 0x00 0x120>;
100		#pinctrl-cells = <1>;
101		pinctrl-single,register-width = <32>;
102		pinctrl-single,function-mask = <0xffffffff>;
103	};
104
105	wkup_pmx3: pinctrl@4301c190 {
106		compatible = "pinctrl-single";
107		/* Proxy 0 addressing */
108		reg = <0x00 0x4301c190 0x00 0x004>;
109		#pinctrl-cells = <1>;
110		pinctrl-single,register-width = <32>;
111		pinctrl-single,function-mask = <0xffffffff>;
112	};
113
114	wkup_gpio_intr: interrupt-controller@42200000 {
115		compatible = "ti,sci-intr";
116		reg = <0x00 0x42200000 0x00 0x400>;
117		ti,intr-trigger-type = <1>;
118		interrupt-controller;
119		interrupt-parent = <&gic500>;
120		#interrupt-cells = <1>;
121		ti,sci = <&sms>;
122		ti,sci-dev-id = <177>;
123		ti,interrupt-ranges = <16 960 16>;
124	};
125
126	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
127	mcu_timerio_input: pinctrl@40f04200 {
128		compatible = "pinctrl-single";
129		reg = <0x00 0x40f04200 0x00 0x28>;
130		#pinctrl-cells = <1>;
131		pinctrl-single,register-width = <32>;
132		pinctrl-single,function-mask = <0x0000000f>;
133		/* Non-MPU Firmware usage */
134		status = "reserved";
135	};
136
137	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
138	mcu_timerio_output: pinctrl@40f04280 {
139		compatible = "pinctrl-single";
140		reg = <0x00 0x40f04280 0x00 0x28>;
141		#pinctrl-cells = <1>;
142		pinctrl-single,register-width = <32>;
143		pinctrl-single,function-mask = <0x0000000f>;
144		/* Non-MPU Firmware usage */
145		status = "reserved";
146	};
147
148	mcu_conf: syscon@40f00000 {
149		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
150		reg = <0x00 0x40f00000 0x00 0x20000>;
151		#address-cells = <1>;
152		#size-cells = <1>;
153		ranges = <0x00 0x00 0x40f00000 0x20000>;
154
155		phy_gmii_sel: phy@4040 {
156			compatible = "ti,am654-phy-gmii-sel";
157			reg = <0x4040 0x4>;
158			#phy-cells = <1>;
159		};
160	};
161
162	mcu_timer0: timer@40400000 {
163		compatible = "ti,am654-timer";
164		reg = <0x00 0x40400000 0x00 0x400>;
165		interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
166		clocks = <&k3_clks 35 2>;
167		clock-names = "fck";
168		assigned-clocks = <&k3_clks 35 2>;
169		assigned-clock-parents = <&k3_clks 35 3>;
170		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
171		ti,timer-pwm;
172		/* Non-MPU Firmware usage */
173		status = "reserved";
174	};
175
176	mcu_timer1: timer@40410000 {
177		bootph-all;
178		compatible = "ti,am654-timer";
179		reg = <0x00 0x40410000 0x00 0x400>;
180		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
181		clocks = <&k3_clks 117 2>;
182		clock-names = "fck";
183		assigned-clocks = <&k3_clks 117 2>;
184		assigned-clock-parents = <&k3_clks 117 3>;
185		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
186		ti,timer-pwm;
187		/* Non-MPU Firmware usage */
188		status = "reserved";
189	};
190
191	mcu_timer2: timer@40420000 {
192		compatible = "ti,am654-timer";
193		reg = <0x00 0x40420000 0x00 0x400>;
194		interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
195		clocks = <&k3_clks 118 2>;
196		clock-names = "fck";
197		assigned-clocks = <&k3_clks 118 2>;
198		assigned-clock-parents = <&k3_clks 118 3>;
199		power-domains = <&k3_pds 118 TI_SCI_PD_EXCLUSIVE>;
200		ti,timer-pwm;
201		/* Non-MPU Firmware usage */
202		status = "reserved";
203	};
204
205	mcu_timer3: timer@40430000 {
206		compatible = "ti,am654-timer";
207		reg = <0x00 0x40430000 0x00 0x400>;
208		interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
209		clocks = <&k3_clks 119 2>;
210		clock-names = "fck";
211		assigned-clocks = <&k3_clks 119 2>;
212		assigned-clock-parents = <&k3_clks 119 3>;
213		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
214		ti,timer-pwm;
215		/* Non-MPU Firmware usage */
216		status = "reserved";
217	};
218
219	mcu_timer4: timer@40440000 {
220		compatible = "ti,am654-timer";
221		reg = <0x00 0x40440000 0x00 0x400>;
222		interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
223		clocks = <&k3_clks 120 2>;
224		clock-names = "fck";
225		assigned-clocks = <&k3_clks 120 2>;
226		assigned-clock-parents = <&k3_clks 120 3>;
227		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
228		ti,timer-pwm;
229		/* Non-MPU Firmware usage */
230		status = "reserved";
231	};
232
233	mcu_timer5: timer@40450000 {
234		compatible = "ti,am654-timer";
235		reg = <0x00 0x40450000 0x00 0x400>;
236		interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
237		clocks = <&k3_clks 121 2>;
238		clock-names = "fck";
239		assigned-clocks = <&k3_clks 121 2>;
240		assigned-clock-parents = <&k3_clks 121 3>;
241		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
242		ti,timer-pwm;
243		/* Non-MPU Firmware usage */
244		status = "reserved";
245	};
246
247	mcu_timer6: timer@40460000 {
248		compatible = "ti,am654-timer";
249		reg = <0x00 0x40460000 0x00 0x400>;
250		interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
251		clocks = <&k3_clks 122 2>;
252		clock-names = "fck";
253		assigned-clocks = <&k3_clks 122 2>;
254		assigned-clock-parents = <&k3_clks 122 3>;
255		power-domains = <&k3_pds 122 TI_SCI_PD_EXCLUSIVE>;
256		ti,timer-pwm;
257		/* Non-MPU Firmware usage */
258		status = "reserved";
259	};
260
261	mcu_timer7: timer@40470000 {
262		compatible = "ti,am654-timer";
263		reg = <0x00 0x40470000 0x00 0x400>;
264		interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
265		clocks = <&k3_clks 123 2>;
266		clock-names = "fck";
267		assigned-clocks = <&k3_clks 123 2>;
268		assigned-clock-parents = <&k3_clks 123 3>;
269		power-domains = <&k3_pds 123 TI_SCI_PD_EXCLUSIVE>;
270		ti,timer-pwm;
271		/* Non-MPU Firmware usage */
272		status = "reserved";
273	};
274
275	mcu_timer8: timer@40480000 {
276		compatible = "ti,am654-timer";
277		reg = <0x00 0x40480000 0x00 0x400>;
278		interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
279		clocks = <&k3_clks 124 2>;
280		clock-names = "fck";
281		assigned-clocks = <&k3_clks 124 2>;
282		assigned-clock-parents = <&k3_clks 124 3>;
283		power-domains = <&k3_pds 124 TI_SCI_PD_EXCLUSIVE>;
284		ti,timer-pwm;
285		/* Non-MPU Firmware usage */
286		status = "reserved";
287	};
288
289	mcu_timer9: timer@40490000 {
290		compatible = "ti,am654-timer";
291		reg = <0x00 0x40490000 0x00 0x400>;
292		interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
293		clocks = <&k3_clks 125 2>;
294		clock-names = "fck";
295		assigned-clocks = <&k3_clks 125 2>;
296		assigned-clock-parents = <&k3_clks 125 3>;
297		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
298		ti,timer-pwm;
299		/* Non-MPU Firmware usage */
300		status = "reserved";
301	};
302
303	wkup_uart0: serial@42300000 {
304		compatible = "ti,j721e-uart", "ti,am654-uart";
305		reg = <0x00 0x42300000 0x00 0x200>;
306		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
307		current-speed = <115200>;
308		clocks = <&k3_clks 397 0>;
309		clock-names = "fclk";
310		power-domains = <&k3_pds 397 TI_SCI_PD_EXCLUSIVE>;
311		status = "disabled";
312	};
313
314	mcu_uart0: serial@40a00000 {
315		compatible = "ti,j721e-uart", "ti,am654-uart";
316		reg = <0x00 0x40a00000 0x00 0x200>;
317		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
318		current-speed = <115200>;
319		clocks = <&k3_clks 149 0>;
320		clock-names = "fclk";
321		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
322		status = "disabled";
323	};
324
325	wkup_gpio0: gpio@42110000 {
326		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
327		reg = <0x00 0x42110000 0x00 0x100>;
328		gpio-controller;
329		#gpio-cells = <2>;
330		interrupt-parent = <&wkup_gpio_intr>;
331		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
332		interrupt-controller;
333		#interrupt-cells = <2>;
334		ti,ngpio = <89>;
335		ti,davinci-gpio-unbanked = <0>;
336		power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>;
337		clocks = <&k3_clks 167 0>;
338		clock-names = "gpio";
339		status = "disabled";
340	};
341
342	wkup_gpio1: gpio@42100000 {
343		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
344		reg = <0x00 0x42100000 0x00 0x100>;
345		gpio-controller;
346		#gpio-cells = <2>;
347		interrupt-parent = <&wkup_gpio_intr>;
348		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
349		interrupt-controller;
350		#interrupt-cells = <2>;
351		ti,ngpio = <89>;
352		ti,davinci-gpio-unbanked = <0>;
353		power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>;
354		clocks = <&k3_clks 168 0>;
355		clock-names = "gpio";
356		status = "disabled";
357	};
358
359	wkup_i2c0: i2c@42120000 {
360		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
361		reg = <0x00 0x42120000 0x00 0x100>;
362		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
363		#address-cells = <1>;
364		#size-cells = <0>;
365		clocks = <&k3_clks 279 2>;
366		clock-names = "fck";
367		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
368		status = "disabled";
369	};
370
371	mcu_i2c0: i2c@40b00000 {
372		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
373		reg = <0x00 0x40b00000 0x00 0x100>;
374		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
375		#address-cells = <1>;
376		#size-cells = <0>;
377		clocks = <&k3_clks 277 2>;
378		clock-names = "fck";
379		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
380		status = "disabled";
381	};
382
383	mcu_i2c1: i2c@40b10000 {
384		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
385		reg = <0x00 0x40b10000 0x00 0x100>;
386		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
387		#address-cells = <1>;
388		#size-cells = <0>;
389		clocks = <&k3_clks 278 2>;
390		clock-names = "fck";
391		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
392		status = "disabled";
393	};
394
395	mcu_mcan0: can@40528000 {
396		compatible = "bosch,m_can";
397		reg = <0x00 0x40528000 0x00 0x200>,
398		      <0x00 0x40500000 0x00 0x8000>;
399		reg-names = "m_can", "message_ram";
400		power-domains = <&k3_pds 263 TI_SCI_PD_EXCLUSIVE>;
401		clocks = <&k3_clks 263 6>, <&k3_clks 263 1>;
402		clock-names = "hclk", "cclk";
403		interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
404			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
405		interrupt-names = "int0", "int1";
406		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
407		status = "disabled";
408	};
409
410	mcu_mcan1: can@40568000 {
411		compatible = "bosch,m_can";
412		reg = <0x00 0x40568000 0x00 0x200>,
413		      <0x00 0x40540000 0x00 0x8000>;
414		reg-names = "m_can", "message_ram";
415		power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
416		clocks = <&k3_clks 264 6>, <&k3_clks 264 1>;
417		clock-names = "hclk", "cclk";
418		interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
419			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
420		interrupt-names = "int0", "int1";
421		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
422		status = "disabled";
423	};
424
425	mcu_spi0: spi@40300000 {
426		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
427		reg = <0x00 0x040300000 0x00 0x400>;
428		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
429		#address-cells = <1>;
430		#size-cells = <0>;
431		power-domains = <&k3_pds 384 TI_SCI_PD_EXCLUSIVE>;
432		clocks = <&k3_clks 384 0>;
433		status = "disabled";
434	};
435
436	mcu_spi1: spi@40310000 {
437		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
438		reg = <0x00 0x040310000 0x00 0x400>;
439		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
440		#address-cells = <1>;
441		#size-cells = <0>;
442		power-domains = <&k3_pds 385 TI_SCI_PD_EXCLUSIVE>;
443		clocks = <&k3_clks 385 0>;
444		status = "disabled";
445	};
446
447	mcu_spi2: spi@40320000 {
448		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
449		reg = <0x00 0x040320000 0x00 0x400>;
450		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
451		#address-cells = <1>;
452		#size-cells = <0>;
453		power-domains = <&k3_pds 386 TI_SCI_PD_EXCLUSIVE>;
454		clocks = <&k3_clks 386 0>;
455		status = "disabled";
456	};
457
458	mcu_navss: bus@28380000 {
459		bootph-all;
460		compatible = "simple-bus";
461		#address-cells = <2>;
462		#size-cells = <2>;
463		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
464		ti,sci-dev-id = <323>;
465		dma-coherent;
466		dma-ranges;
467
468		mcu_ringacc: ringacc@2b800000 {
469			bootph-all;
470			compatible = "ti,am654-navss-ringacc";
471			reg = <0x00 0x2b800000 0x00 0x400000>,
472			      <0x00 0x2b000000 0x00 0x400000>,
473			      <0x00 0x28590000 0x00 0x100>,
474			      <0x00 0x2a500000 0x00 0x40000>,
475			      <0x00 0x28440000 0x00 0x40000>;
476			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
477			ti,num-rings = <286>;
478			ti,sci-rm-range-gp-rings = <0x1>;
479			ti,sci = <&sms>;
480			ti,sci-dev-id = <328>;
481			msi-parent = <&main_udmass_inta>;
482		};
483
484		mcu_udmap: dma-controller@285c0000 {
485			bootph-all;
486			compatible = "ti,j721e-navss-mcu-udmap";
487			reg = <0x00 0x285c0000 0x00 0x100>,
488			      <0x00 0x2a800000 0x00 0x40000>,
489			      <0x00 0x2aa00000 0x00 0x40000>,
490			      <0x00 0x284a0000 0x00 0x4000>,
491			      <0x00 0x284c0000 0x00 0x4000>,
492			      <0x00 0x28400000 0x00 0x2000>;
493			reg-names = "gcfg", "rchanrt", "tchanrt",
494				    "tchan", "rchan", "rflow";
495			msi-parent = <&main_udmass_inta>;
496			#dma-cells = <1>;
497
498			ti,sci = <&sms>;
499			ti,sci-dev-id = <329>;
500			ti,ringacc = <&mcu_ringacc>;
501			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
502						<0x0f>; /* TX_HCHAN */
503			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
504						<0x0b>; /* RX_HCHAN */
505			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
506		};
507	};
508
509	secure_proxy_mcu: mailbox@2a480000 {
510		compatible = "ti,am654-secure-proxy";
511		#mbox-cells = <1>;
512		reg-names = "target_data", "rt", "scfg";
513		reg = <0x00 0x2a480000 0x00 0x80000>,
514		      <0x00 0x2a380000 0x00 0x80000>,
515		      <0x00 0x2a400000 0x00 0x80000>;
516		/*
517		 * Marked Disabled:
518		 * Node is incomplete as it is meant for bootloaders and
519		 * firmware on non-MPU processors
520		 */
521		status = "disabled";
522	};
523
524	mcu_cpsw: ethernet@46000000 {
525		compatible = "ti,j721e-cpsw-nuss";
526		#address-cells = <2>;
527		#size-cells = <2>;
528		reg = <0x00 0x46000000 0x00 0x200000>;
529		reg-names = "cpsw_nuss";
530		ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>;
531		dma-coherent;
532		clocks = <&k3_clks 63 0>;
533		clock-names = "fck";
534		power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
535
536		dmas = <&mcu_udmap 0xf000>,
537		       <&mcu_udmap 0xf001>,
538		       <&mcu_udmap 0xf002>,
539		       <&mcu_udmap 0xf003>,
540		       <&mcu_udmap 0xf004>,
541		       <&mcu_udmap 0xf005>,
542		       <&mcu_udmap 0xf006>,
543		       <&mcu_udmap 0xf007>,
544		       <&mcu_udmap 0x7000>;
545		dma-names = "tx0", "tx1", "tx2", "tx3",
546			    "tx4", "tx5", "tx6", "tx7",
547			    "rx";
548		status = "disabled";
549
550		ethernet-ports {
551			#address-cells = <1>;
552			#size-cells = <0>;
553
554			mcu_cpsw_port1: port@1 {
555				reg = <1>;
556				ti,mac-only;
557				label = "port1";
558				ti,syscon-efuse = <&mcu_conf 0x200>;
559				phys = <&phy_gmii_sel 1>;
560			};
561		};
562
563		davinci_mdio: mdio@f00 {
564			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
565			reg = <0x00 0xf00 0x00 0x100>;
566			#address-cells = <1>;
567			#size-cells = <0>;
568			clocks = <&k3_clks 63 0>;
569			clock-names = "fck";
570			bus_freq = <1000000>;
571		};
572
573		cpts@3d000 {
574			compatible = "ti,am65-cpts";
575			reg = <0x00 0x3d000 0x00 0x400>;
576			clocks = <&k3_clks 63 3>;
577			clock-names = "cpts";
578			assigned-clocks = <&k3_clks 63 3>; /* CPTS_RFT_CLK */
579			assigned-clock-parents = <&k3_clks 63 5>; /* MAIN_0_HSDIV6_CLK */
580			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
581			interrupt-names = "cpts";
582			ti,cpts-ext-ts-inputs = <4>;
583			ti,cpts-periodic-outputs = <2>;
584		};
585	};
586
587	mcu_r5fss0: r5fss@41000000 {
588		compatible = "ti,j721s2-r5fss";
589		ti,cluster-mode = <1>;
590		#address-cells = <1>;
591		#size-cells = <1>;
592		ranges = <0x41000000 0x00 0x41000000 0x20000>,
593			 <0x41400000 0x00 0x41400000 0x20000>;
594		power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
595
596		mcu_r5fss0_core0: r5f@41000000 {
597			compatible = "ti,j721s2-r5f";
598			reg = <0x41000000 0x00010000>,
599			      <0x41010000 0x00010000>;
600			reg-names = "atcm", "btcm";
601			ti,sci = <&sms>;
602			ti,sci-dev-id = <346>;
603			ti,sci-proc-ids = <0x01 0xff>;
604			resets = <&k3_reset 346 1>;
605			firmware-name = "j784s4-mcu-r5f0_0-fw";
606			ti,atcm-enable = <1>;
607			ti,btcm-enable = <1>;
608			ti,loczrama = <1>;
609		};
610
611		mcu_r5fss0_core1: r5f@41400000 {
612			compatible = "ti,j721s2-r5f";
613			reg = <0x41400000 0x00010000>,
614			      <0x41410000 0x00010000>;
615			reg-names = "atcm", "btcm";
616			ti,sci = <&sms>;
617			ti,sci-dev-id = <347>;
618			ti,sci-proc-ids = <0x02 0xff>;
619			resets = <&k3_reset 347 1>;
620			firmware-name = "j784s4-mcu-r5f0_1-fw";
621			ti,atcm-enable = <1>;
622			ti,btcm-enable = <1>;
623			ti,loczrama = <1>;
624		};
625	};
626
627	wkup_vtm0: temperature-sensor@42040000 {
628		compatible = "ti,j7200-vtm";
629		reg = <0x00 0x42040000 0x00 0x350>,
630		      <0x00 0x42050000 0x00 0x350>;
631		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
632		#thermal-sensor-cells = <1>;
633	};
634
635	tscadc0: tscadc@40200000 {
636		compatible = "ti,am3359-tscadc";
637		reg = <0x00 0x40200000 0x00 0x1000>;
638		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
639		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
640		clocks = <&k3_clks 0 0>;
641		assigned-clocks = <&k3_clks 0 2>;
642		assigned-clock-rates = <60000000>;
643		clock-names = "fck";
644		dmas = <&main_udmap 0x7400>,
645			<&main_udmap 0x7401>;
646		dma-names = "fifo0", "fifo1";
647		status = "disabled";
648
649		adc {
650			#io-channel-cells = <1>;
651			compatible = "ti,am3359-adc";
652		};
653	};
654
655	tscadc1: tscadc@40210000 {
656		compatible = "ti,am3359-tscadc";
657		reg = <0x00 0x40210000 0x00 0x1000>;
658		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
659		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
660		clocks = <&k3_clks 1 0>;
661		assigned-clocks = <&k3_clks 1 2>;
662		assigned-clock-rates = <60000000>;
663		clock-names = "fck";
664		dmas = <&main_udmap 0x7402>,
665			<&main_udmap 0x7403>;
666		dma-names = "fifo0", "fifo1";
667		status = "disabled";
668
669		adc {
670			#io-channel-cells = <1>;
671			compatible = "ti,am3359-adc";
672		};
673	};
674
675	fss: bus@47000000 {
676		compatible = "simple-bus";
677		reg = <0x00 0x47000000 0x00 0x100>;
678		#address-cells = <2>;
679		#size-cells = <2>;
680		ranges;
681
682		ospi0: spi@47040000 {
683			compatible = "ti,am654-ospi", "cdns,qspi-nor";
684			reg = <0x00 0x47040000 0x00 0x100>,
685			      <0x05 0x0000000 0x01 0x0000000>;
686			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
687			cdns,fifo-depth = <256>;
688			cdns,fifo-width = <4>;
689			cdns,trigger-address = <0x0>;
690			clocks = <&k3_clks 161 7>;
691			assigned-clocks = <&k3_clks 161 7>;
692			assigned-clock-parents = <&k3_clks 161 9>;
693			assigned-clock-rates = <166666666>;
694			power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
695			#address-cells = <1>;
696			#size-cells = <0>;
697			status = "disabled";
698		};
699
700		ospi1: spi@47050000 {
701			compatible = "ti,am654-ospi", "cdns,qspi-nor";
702			reg = <0x00 0x47050000 0x00 0x100>,
703			      <0x07 0x0000000 0x01 0x0000000>;
704			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
705			cdns,fifo-depth = <256>;
706			cdns,fifo-width = <4>;
707			cdns,trigger-address = <0x0>;
708			clocks = <&k3_clks 162 7>;
709			power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
710			#address-cells = <1>;
711			#size-cells = <0>;
712			status = "disabled";
713		};
714	};
715
716	mcu_esm: esm@40800000 {
717		compatible = "ti,j721e-esm";
718		reg = <0x00 0x40800000 0x00 0x1000>;
719		ti,esm-pins = <95>;
720		bootph-pre-ram;
721	};
722
723	wkup_esm: esm@42080000 {
724		compatible = "ti,j721e-esm";
725		reg = <0x00 0x42080000 0x00 0x1000>;
726		ti,esm-pins = <63>;
727		bootph-pre-ram;
728	};
729
730	/*
731	 * The 2 RTI instances are couple with MCU R5Fs so keeping them
732	 * reserved as these will be used by their respective firmware
733	 */
734	mcu_watchdog0: watchdog@40600000 {
735		compatible = "ti,j7-rti-wdt";
736		reg = <0x00 0x40600000 0x00 0x100>;
737		clocks = <&k3_clks 367 1>;
738		power-domains = <&k3_pds 367 TI_SCI_PD_EXCLUSIVE>;
739		assigned-clocks = <&k3_clks 367 0>;
740		assigned-clock-parents = <&k3_clks 367 4>;
741		/* reserved for MCU_R5F0_0 */
742		status = "reserved";
743	};
744
745	mcu_watchdog1: watchdog@40610000 {
746		compatible = "ti,j7-rti-wdt";
747		reg = <0x00 0x40610000 0x00 0x100>;
748		clocks = <&k3_clks 368 1>;
749		power-domains = <&k3_pds 368 TI_SCI_PD_EXCLUSIVE>;
750		assigned-clocks = <&k3_clks 368 0>;
751		assigned-clock-parents = <&k3_clks 368 4>;
752		/* reserved for MCU_R5F0_1 */
753		status = "reserved";
754	};
755};
756