xref: /freebsd/sys/contrib/device-tree/src/arm64/ti/k3-j721e-sk.dts (revision c9ccf3a32da427475985b85d7df023ccfb138c27)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
4 *
5 * J721E SK URL: https://www.ti.com/tool/SK-TDA4VM
6 */
7
8/dts-v1/;
9
10#include "k3-j721e.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/input/input.h>
13#include <dt-bindings/net/ti-dp83867.h>
14
15/ {
16	compatible = "ti,j721e-sk", "ti,j721e";
17	model = "Texas Instruments J721E SK";
18
19	chosen {
20		stdout-path = "serial2:115200n8";
21		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
22	};
23
24	memory@80000000 {
25		device_type = "memory";
26		/* 4G RAM */
27		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
28		      <0x00000008 0x80000000 0x00000000 0x80000000>;
29	};
30
31	reserved_memory: reserved-memory {
32		#address-cells = <2>;
33		#size-cells = <2>;
34		ranges;
35
36		secure_ddr: optee@9e800000 {
37			reg = <0x00 0x9e800000 0x00 0x01800000>;
38			alignment = <0x1000>;
39			no-map;
40		};
41
42		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
43			compatible = "shared-dma-pool";
44			reg = <0x00 0xa0000000 0x00 0x100000>;
45			no-map;
46		};
47
48		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
49			compatible = "shared-dma-pool";
50			reg = <0x00 0xa0100000 0x00 0xf00000>;
51			no-map;
52		};
53
54		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
55			compatible = "shared-dma-pool";
56			reg = <0x00 0xa1000000 0x00 0x100000>;
57			no-map;
58		};
59
60		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
61			compatible = "shared-dma-pool";
62			reg = <0x00 0xa1100000 0x00 0xf00000>;
63			no-map;
64		};
65
66		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
67			compatible = "shared-dma-pool";
68			reg = <0x00 0xa2000000 0x00 0x100000>;
69			no-map;
70		};
71
72		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
73			compatible = "shared-dma-pool";
74			reg = <0x00 0xa2100000 0x00 0xf00000>;
75			no-map;
76		};
77
78		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
79			compatible = "shared-dma-pool";
80			reg = <0x00 0xa3000000 0x00 0x100000>;
81			no-map;
82		};
83
84		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
85			compatible = "shared-dma-pool";
86			reg = <0x00 0xa3100000 0x00 0xf00000>;
87			no-map;
88		};
89
90		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
91			compatible = "shared-dma-pool";
92			reg = <0x00 0xa4000000 0x00 0x100000>;
93			no-map;
94		};
95
96		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
97			compatible = "shared-dma-pool";
98			reg = <0x00 0xa4100000 0x00 0xf00000>;
99			no-map;
100		};
101
102		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
103			compatible = "shared-dma-pool";
104			reg = <0x00 0xa5000000 0x00 0x100000>;
105			no-map;
106		};
107
108		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
109			compatible = "shared-dma-pool";
110			reg = <0x00 0xa5100000 0x00 0xf00000>;
111			no-map;
112		};
113
114		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
115			compatible = "shared-dma-pool";
116			reg = <0x00 0xa6000000 0x00 0x100000>;
117			no-map;
118		};
119
120		c66_0_memory_region: c66-memory@a6100000 {
121			compatible = "shared-dma-pool";
122			reg = <0x00 0xa6100000 0x00 0xf00000>;
123			no-map;
124		};
125
126		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
127			compatible = "shared-dma-pool";
128			reg = <0x00 0xa7000000 0x00 0x100000>;
129			no-map;
130		};
131
132		c66_1_memory_region: c66-memory@a7100000 {
133			compatible = "shared-dma-pool";
134			reg = <0x00 0xa7100000 0x00 0xf00000>;
135			no-map;
136		};
137
138		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
139			compatible = "shared-dma-pool";
140			reg = <0x00 0xa8000000 0x00 0x100000>;
141			no-map;
142		};
143
144		c71_0_memory_region: c71-memory@a8100000 {
145			compatible = "shared-dma-pool";
146			reg = <0x00 0xa8100000 0x00 0xf00000>;
147			no-map;
148		};
149
150		rtos_ipc_memory_region: ipc-memories@aa000000 {
151			reg = <0x00 0xaa000000 0x00 0x01c00000>;
152			alignment = <0x1000>;
153			no-map;
154		};
155	};
156
157	vusb_main: fixedregulator-vusb-main5v0 {
158		/* USB MAIN INPUT 5V DC */
159		compatible = "regulator-fixed";
160		regulator-name = "vusb-main5v0";
161		regulator-min-microvolt = <5000000>;
162		regulator-max-microvolt = <5000000>;
163		regulator-always-on;
164		regulator-boot-on;
165	};
166
167	vsys_3v3: fixedregulator-vsys3v3 {
168		/* Output of LM5141 */
169		compatible = "regulator-fixed";
170		regulator-name = "vsys_3v3";
171		regulator-min-microvolt = <3300000>;
172		regulator-max-microvolt = <3300000>;
173		vin-supply = <&vusb_main>;
174		regulator-always-on;
175		regulator-boot-on;
176	};
177
178	vdd_mmc1: fixedregulator-sd {
179		compatible = "regulator-fixed";
180		pinctrl-names = "default";
181		pinctrl-0 = <&vdd_mmc1_en_pins_default>;
182		regulator-name = "vdd_mmc1";
183		regulator-min-microvolt = <3300000>;
184		regulator-max-microvolt = <3300000>;
185		regulator-boot-on;
186		enable-active-high;
187		vin-supply = <&vsys_3v3>;
188		gpio = <&wkup_gpio0 8 GPIO_ACTIVE_HIGH>;
189	};
190
191	vdd_sd_dv_alt: gpio-regulator-tps659411 {
192		compatible = "regulator-gpio";
193		pinctrl-names = "default";
194		pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
195		regulator-name = "tps659411";
196		regulator-min-microvolt = <1800000>;
197		regulator-max-microvolt = <3300000>;
198		regulator-boot-on;
199		vin-supply = <&vsys_3v3>;
200		gpios = <&wkup_gpio0 9 GPIO_ACTIVE_HIGH>;
201		states = <1800000 0x0>,
202			 <3300000 0x1>;
203	};
204
205	dp_pwr_3v3: fixedregulator-dp-prw {
206		compatible = "regulator-fixed";
207		regulator-name = "dp-pwr";
208		regulator-min-microvolt = <3300000>;
209		regulator-max-microvolt = <3300000>;
210		pinctrl-names = "default";
211		pinctrl-0 = <&dp_pwr_en_pins_default>;
212		gpio = <&main_gpio0 111 0>;	/* DP0_3V3 _EN */
213		enable-active-high;
214	};
215
216};
217
218&main_pmx0 {
219	main_mmc1_pins_default: main-mmc1-pins-default {
220		pinctrl-single,pins = <
221			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
222			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
223			J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
224			J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
225			J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
226			J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
227			J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
228			J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
229		>;
230	};
231
232	main_uart0_pins_default: main-uart0-pins-default {
233		pinctrl-single,pins = <
234			J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */
235			J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */
236			J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
237			J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
238		>;
239	};
240
241	main_i2c0_pins_default: main-i2c0-pins-default {
242		pinctrl-single,pins = <
243			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
244			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
245		>;
246	};
247
248	main_i2c1_pins_default: main-i2c1-pins-default {
249		pinctrl-single,pins = <
250			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
251			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
252		>;
253	};
254
255	main_i2c3_pins_default: main-i2c3-pins-default {
256		pinctrl-single,pins = <
257			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
258			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
259		>;
260	};
261
262	main_usbss0_pins_default: main-usbss0-pins-default {
263		pinctrl-single,pins = <
264			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
265			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
266		>;
267	};
268
269	main_usbss1_pins_default: main-usbss1-pins-default {
270		pinctrl-single,pins = <
271			J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
272		>;
273	};
274
275	dp0_pins_default: dp0-pins-default {
276		pinctrl-single,pins = <
277			J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
278		>;
279	};
280
281	dp_pwr_en_pins_default: dp-pwr-en-pins-default {
282		pinctrl-single,pins = <
283			J721E_IOPAD(0x1c0, PIN_INPUT, 7) /* (AA2) SPI0_CS0.GPIO0_111 */
284		>;
285	};
286
287	dss_vout0_pins_default: dss-vout0-pins-default {
288		pinctrl-single,pins = <
289			J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */
290			J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */
291			J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */
292			J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */
293			J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */
294			J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */
295			J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */
296			J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */
297			J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23) PRG1_PRU1_GPO8.VOUT0_DATA8 */
298			J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */
299			J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */
300			J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */
301			J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */
302			J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */
303			J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */
304			J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */
305			J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */
306			J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */
307			J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */
308			J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */
309			J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */
310			J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */
311			J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */
312			J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */
313			J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */
314			J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */
315			J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */
316			J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */
317		>;
318	};
319
320	/* Reset for M.2 E Key slot on PCIe0  */
321	ekey_reset_pins_default: ekey-reset-pns-pins-default {
322		pinctrl-single,pins = <
323			J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */
324		>;
325	};
326};
327
328&wkup_pmx0 {
329	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
330		pinctrl-single,pins = <
331			J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
332			J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */
333			J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */
334			J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */
335			J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */
336			J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */
337			J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */
338			J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */
339			J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */
340			J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */
341			J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */
342			J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */
343		>;
344	};
345
346	mcu_mdio_pins_default: mcu-mdio1-pins-default {
347		pinctrl-single,pins = <
348			J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */
349			J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */
350		>;
351	};
352
353	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
354		pinctrl-single,pins = <
355			J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 0) /* (E20) MCU_OSPI0_CLK */
356			J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 0) /* (F19) MCU_OSPI0_CSn0 */
357			J721E_WKUP_IOPAD(0xc, PIN_INPUT, 0) /* (D20) MCU_OSPI0_D0 */
358			J721E_WKUP_IOPAD(0x10, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D1 */
359			J721E_WKUP_IOPAD(0x14, PIN_INPUT, 0) /* (G20) MCU_OSPI0_D2 */
360			J721E_WKUP_IOPAD(0x18, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D3 */
361			J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 0) /* (F21) MCU_OSPI0_D4 */
362			J721E_WKUP_IOPAD(0x20, PIN_INPUT, 0) /* (E21) MCU_OSPI0_D5 */
363			J721E_WKUP_IOPAD(0x24, PIN_INPUT, 0) /* (B22) MCU_OSPI0_D6 */
364			J721E_WKUP_IOPAD(0x28, PIN_INPUT, 0) /* (G21) MCU_OSPI0_D7 */
365			J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21) MCU_OSPI0_DQS */
366		>;
367	};
368
369	vdd_mmc1_en_pins_default: vdd-mmc1-en-pins-default {
370		pinctrl-single,pins = <
371			J721E_WKUP_IOPAD(0xd0, PIN_OUTPUT, 7) /* (G27) WKUP_GPIO0_8 */
372		>;
373	};
374
375	vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default {
376		pinctrl-single,pins = <
377			J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */
378		>;
379	};
380
381	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
382		pinctrl-single,pins = <
383			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
384			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
385		>;
386	};
387
388	/* Reset for M.2 M Key slot on PCIe1  */
389	mkey_reset_pins_default: mkey-reset-pns-pins-default {
390		pinctrl-single,pins = <
391			J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* (H27) WKUP_GPIO0_11 */
392		>;
393	};
394};
395
396&wkup_uart0 {
397	/* Wakeup UART is used by System firmware */
398	status = "reserved";
399};
400
401&main_uart0 {
402	pinctrl-names = "default";
403	pinctrl-0 = <&main_uart0_pins_default>;
404	/* Shared with ATF on this platform */
405	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
406};
407
408&main_uart2 {
409	/* Brought out on RPi header */
410	status = "disabled";
411};
412
413&main_uart3 {
414	/* UART not brought out */
415	status = "disabled";
416};
417
418&main_uart5 {
419	/* UART not brought out */
420	status = "disabled";
421};
422
423&main_uart6 {
424	/* UART not brought out */
425	status = "disabled";
426};
427
428&main_uart7 {
429	/* UART not brought out */
430	status = "disabled";
431};
432
433&main_uart8 {
434	/* UART not brought out */
435	status = "disabled";
436};
437
438&main_uart9 {
439	/* Brought out on M.2 E Key */
440	status = "disabled";
441};
442
443&main_sdhci0 {
444	/* Unused */
445	status = "disabled";
446};
447
448&main_sdhci1 {
449	/* SD Card */
450	vmmc-supply = <&vdd_mmc1>;
451	vqmmc-supply = <&vdd_sd_dv_alt>;
452	pinctrl-names = "default";
453	pinctrl-0 = <&main_mmc1_pins_default>;
454	ti,driver-strength-ohm = <50>;
455	disable-wp;
456};
457
458&main_sdhci2 {
459	/* Unused */
460	status = "disabled";
461};
462
463&ospi0 {
464	pinctrl-names = "default";
465	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
466
467	flash@0 {
468		compatible = "jedec,spi-nor";
469		reg = <0x0>;
470		spi-tx-bus-width = <8>;
471		spi-rx-bus-width = <8>;
472		spi-max-frequency = <25000000>;
473		cdns,tshsl-ns = <60>;
474		cdns,tsd2d-ns = <60>;
475		cdns,tchsh-ns = <60>;
476		cdns,tslch-ns = <60>;
477		cdns,read-delay = <4>;
478	};
479};
480
481&ospi1 {
482	/* Unused */
483	status = "disabled";
484};
485
486&main_i2c0 {
487	pinctrl-names = "default";
488	pinctrl-0 = <&main_i2c0_pins_default>;
489	clock-frequency = <400000>;
490
491	i2c-mux@71 {
492		compatible = "nxp,pca9543";
493		#address-cells = <1>;
494		#size-cells = <0>;
495		reg = <0x71>;
496
497		/* PCIe1 M.2 M Key I2C */
498		i2c@0 {
499			#address-cells = <1>;
500			#size-cells = <0>;
501			reg = <0>;
502		};
503
504		/* PCIe0 M.2 E Key I2C */
505		i2c@1 {
506			#address-cells = <1>;
507			#size-cells = <0>;
508			reg = <1>;
509		};
510	};
511};
512
513&main_i2c1 {
514	pinctrl-names = "default";
515	pinctrl-0 = <&main_i2c1_pins_default>;
516	/* i2c1 is used for DVI DDC, so we need to use 100kHz */
517	clock-frequency = <100000>;
518};
519
520&main_i2c2 {
521	/* Unused */
522	status = "disabled";
523};
524
525&main_i2c3 {
526	pinctrl-names = "default";
527	pinctrl-0 = <&main_i2c3_pins_default>;
528	clock-frequency = <400000>;
529
530	i2c-mux@70 {
531		compatible = "nxp,pca9543";
532		#address-cells = <1>;
533		#size-cells = <0>;
534		reg = <0x70>;
535
536		/* CSI0 I2C */
537		i2c@0 {
538			#address-cells = <1>;
539			#size-cells = <0>;
540			reg = <0>;
541		};
542
543		/* CSI1 I2C */
544		i2c@1 {
545			#address-cells = <1>;
546			#size-cells = <0>;
547			reg = <1>;
548		};
549	};
550};
551
552&main_i2c4 {
553	/* Unused */
554	status = "disabled";
555};
556
557&main_i2c5 {
558	/* Brought out on RPi Header */
559	status = "disabled";
560};
561
562&main_i2c6 {
563	/* Unused */
564	status = "disabled";
565};
566
567&main_gpio2 {
568	status = "disabled";
569};
570
571&main_gpio3 {
572	status = "disabled";
573};
574
575&main_gpio4 {
576	status = "disabled";
577};
578
579&main_gpio5 {
580	status = "disabled";
581};
582
583&main_gpio6 {
584	status = "disabled";
585};
586
587&main_gpio7 {
588	status = "disabled";
589};
590
591&wkup_gpio1 {
592	status = "disabled";
593};
594
595&main_r5fss0_core0{
596	firmware-name = "pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f";
597};
598
599&usb_serdes_mux {
600	idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
601};
602
603&serdes_ln_ctrl {
604	idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_IP4_UNUSED>,
605		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
606		      <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>,
607		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
608		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
609		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
610};
611
612&serdes_wiz3 {
613	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
614	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
615};
616
617&serdes3 {
618	serdes3_usb_link: phy@0 {
619		reg = <0>;
620		cdns,num-lanes = <2>;
621		#phy-cells = <0>;
622		cdns,phy-type = <PHY_TYPE_USB3>;
623		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
624	};
625};
626
627&usbss0 {
628	pinctrl-names = "default";
629	pinctrl-0 = <&main_usbss0_pins_default>;
630	ti,vbus-divider;
631};
632
633&usb0 {
634	dr_mode = "otg";
635	maximum-speed = "super-speed";
636	phys = <&serdes3_usb_link>;
637	phy-names = "cdns3,usb3-phy";
638};
639
640&serdes2 {
641	serdes2_usb_link: phy@1 {
642		reg = <1>;
643		cdns,num-lanes = <1>;
644		#phy-cells = <0>;
645		cdns,phy-type = <PHY_TYPE_USB3>;
646		resets = <&serdes_wiz2 2>;
647	};
648};
649
650&usbss1 {
651	pinctrl-names = "default";
652	pinctrl-0 = <&main_usbss1_pins_default>;
653	ti,vbus-divider;
654};
655
656&usb1 {
657	dr_mode = "host";
658	maximum-speed = "super-speed";
659	phys = <&serdes2_usb_link>;
660	phy-names = "cdns3,usb3-phy";
661};
662
663&tscadc0 {
664	/* Unused */
665	status = "disabled";
666};
667
668&tscadc1 {
669	/* Unused */
670	status = "disabled";
671};
672
673&mcu_cpsw {
674	pinctrl-names = "default";
675	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
676};
677
678&davinci_mdio {
679	phy0: ethernet-phy@0 {
680		reg = <0>;
681		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
682		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
683	};
684};
685
686&cpsw_port1 {
687	phy-mode = "rgmii-rxid";
688	phy-handle = <&phy0>;
689};
690
691&dss {
692	pinctrl-names = "default";
693	pinctrl-0 = <&dss_vout0_pins_default>;
694
695	assigned-clocks = <&k3_clks 152 1>,	/* VP 1 pixel clock */
696			  <&k3_clks 152 4>,	/* VP 2 pixel clock */
697			  <&k3_clks 152 9>,	/* VP 3 pixel clock */
698			  <&k3_clks 152 13>;	/* VP 4 pixel clock */
699	assigned-clock-parents = <&k3_clks 152 2>,	/* PLL16_HSDIV0 */
700				 <&k3_clks 152 6>,	/* DPI0_EXT_CLKSEL_OUT0 */
701				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
702				 <&k3_clks 152 18>;	/* DPI1_EXT_CLKSEL_OUT0 */
703};
704
705&mcasp0 {
706	/* Unused */
707	status = "disabled";
708};
709
710&mcasp1 {
711	/* Unused */
712	status = "disabled";
713};
714
715&mcasp2 {
716	/* Unused */
717	status = "disabled";
718};
719
720&mcasp3 {
721	/* Unused */
722	status = "disabled";
723};
724
725&mcasp4 {
726	/* Unused */
727	status = "disabled";
728};
729
730&mcasp5 {
731	/* Unused */
732	status = "disabled";
733};
734
735&mcasp6 {
736	/* Brought out on RPi header */
737	status = "disabled";
738};
739
740&mcasp7 {
741	/* Unused */
742	status = "disabled";
743};
744
745&mcasp8 {
746	/* Unused */
747	status = "disabled";
748};
749
750&mcasp9 {
751	/* Unused */
752	status = "disabled";
753};
754
755&mcasp10 {
756	/* Unused */
757	status = "disabled";
758};
759
760&mcasp11 {
761	/* Brought out on M.2 E Key */
762	status = "disabled";
763};
764
765&serdes0 {
766	serdes0_pcie_link: phy@0 {
767		reg = <0>;
768		cdns,num-lanes = <1>;
769		#phy-cells = <0>;
770		cdns,phy-type = <PHY_TYPE_PCIE>;
771		resets = <&serdes_wiz0 1>;
772	};
773};
774
775&serdes1 {
776	serdes1_pcie_link: phy@0 {
777		reg = <0>;
778		cdns,num-lanes = <2>;
779		#phy-cells = <0>;
780		cdns,phy-type = <PHY_TYPE_PCIE>;
781		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
782	};
783};
784
785&pcie0_rc {
786	pinctrl-names = "default";
787	pinctrl-0 = <&ekey_reset_pins_default>;
788	reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_HIGH>;
789
790	phys = <&serdes0_pcie_link>;
791	phy-names = "pcie-phy";
792	num-lanes = <1>;
793};
794
795&pcie1_rc {
796	pinctrl-names = "default";
797	pinctrl-0 = <&mkey_reset_pins_default>;
798	reset-gpios = <&wkup_gpio0 11 GPIO_ACTIVE_HIGH>;
799
800	phys = <&serdes1_pcie_link>;
801	phy-names = "pcie-phy";
802	num-lanes = <2>;
803};
804
805&pcie2_rc {
806	/* Unused */
807	status = "disabled";
808};
809
810&pcie0_ep {
811	status = "disabled";
812	phys = <&serdes0_pcie_link>;
813	phy-names = "pcie-phy";
814	num-lanes = <1>;
815};
816
817&pcie1_ep {
818	status = "disabled";
819	phys = <&serdes1_pcie_link>;
820	phy-names = "pcie-phy";
821	num-lanes = <2>;
822};
823
824&pcie2_ep {
825	/* Unused */
826	status = "disabled";
827};
828
829&pcie3_rc {
830	/* Unused */
831	status = "disabled";
832};
833
834&pcie3_ep {
835	/* Unused */
836	status = "disabled";
837};
838
839&dss {
840	status = "disabled";
841};
842
843&icssg0_mdio {
844	status = "disabled";
845};
846
847&icssg1_mdio {
848	status = "disabled";
849};
850
851&ufs_wrapper {
852	status = "disabled";
853};
854
855&mailbox0_cluster0 {
856	interrupts = <436>;
857
858	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
859		ti,mbox-rx = <0 0 0>;
860		ti,mbox-tx = <1 0 0>;
861	};
862
863	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
864		ti,mbox-rx = <2 0 0>;
865		ti,mbox-tx = <3 0 0>;
866	};
867};
868
869&mailbox0_cluster1 {
870	interrupts = <432>;
871
872	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
873		ti,mbox-rx = <0 0 0>;
874		ti,mbox-tx = <1 0 0>;
875	};
876
877	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
878		ti,mbox-rx = <2 0 0>;
879		ti,mbox-tx = <3 0 0>;
880	};
881};
882
883&mailbox0_cluster2 {
884	interrupts = <428>;
885
886	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
887		ti,mbox-rx = <0 0 0>;
888		ti,mbox-tx = <1 0 0>;
889	};
890
891	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
892		ti,mbox-rx = <2 0 0>;
893		ti,mbox-tx = <3 0 0>;
894	};
895};
896
897&mailbox0_cluster3 {
898	interrupts = <424>;
899
900	mbox_c66_0: mbox-c66-0 {
901		ti,mbox-rx = <0 0 0>;
902		ti,mbox-tx = <1 0 0>;
903	};
904
905	mbox_c66_1: mbox-c66-1 {
906		ti,mbox-rx = <2 0 0>;
907		ti,mbox-tx = <3 0 0>;
908	};
909};
910
911&mailbox0_cluster4 {
912	interrupts = <420>;
913
914	mbox_c71_0: mbox-c71-0 {
915		ti,mbox-rx = <0 0 0>;
916		ti,mbox-tx = <1 0 0>;
917	};
918};
919
920&mailbox0_cluster5 {
921	status = "disabled";
922};
923
924&mailbox0_cluster6 {
925	status = "disabled";
926};
927
928&mailbox0_cluster7 {
929	status = "disabled";
930};
931
932&mailbox0_cluster8 {
933	status = "disabled";
934};
935
936&mailbox0_cluster9 {
937	status = "disabled";
938};
939
940&mailbox0_cluster10 {
941	status = "disabled";
942};
943
944&mailbox0_cluster11 {
945	status = "disabled";
946};
947
948&mcu_r5fss0_core0 {
949	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
950	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
951			<&mcu_r5fss0_core0_memory_region>;
952};
953
954&mcu_r5fss0_core1 {
955	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
956	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
957			<&mcu_r5fss0_core1_memory_region>;
958};
959
960&main_r5fss0_core0 {
961	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
962	memory-region = <&main_r5fss0_core0_dma_memory_region>,
963			<&main_r5fss0_core0_memory_region>;
964};
965
966&main_r5fss0_core1 {
967	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
968	memory-region = <&main_r5fss0_core1_dma_memory_region>,
969			<&main_r5fss0_core1_memory_region>;
970};
971
972&main_r5fss1_core0 {
973	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
974	memory-region = <&main_r5fss1_core0_dma_memory_region>,
975			<&main_r5fss1_core0_memory_region>;
976};
977
978&main_r5fss1_core1 {
979	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
980	memory-region = <&main_r5fss1_core1_dma_memory_region>,
981			<&main_r5fss1_core1_memory_region>;
982};
983
984&c66_0 {
985	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
986	memory-region = <&c66_0_dma_memory_region>,
987			<&c66_0_memory_region>;
988};
989
990&c66_1 {
991	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
992	memory-region = <&c66_1_dma_memory_region>,
993			<&c66_1_memory_region>;
994};
995
996&c71_0 {
997	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
998	memory-region = <&c71_0_dma_memory_region>,
999			<&c71_0_memory_region>;
1000};
1001