1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ 4 * 5 * J721E SK URL: https://www.ti.com/tool/SK-TDA4VM 6 */ 7 8/dts-v1/; 9 10#include "k3-j721e.dtsi" 11#include <dt-bindings/gpio/gpio.h> 12#include <dt-bindings/input/input.h> 13#include <dt-bindings/net/ti-dp83867.h> 14 15/ { 16 compatible = "ti,j721e-sk", "ti,j721e"; 17 model = "Texas Instruments J721E SK"; 18 19 aliases { 20 serial0 = &wkup_uart0; 21 serial1 = &mcu_uart0; 22 serial2 = &main_uart0; 23 serial3 = &main_uart1; 24 ethernet0 = &cpsw_port1; 25 mmc1 = &main_sdhci1; 26 }; 27 28 chosen { 29 stdout-path = "serial2:115200n8"; 30 }; 31 32 memory@80000000 { 33 device_type = "memory"; 34 /* 4G RAM */ 35 reg = <0x00000000 0x80000000 0x00000000 0x80000000>, 36 <0x00000008 0x80000000 0x00000000 0x80000000>; 37 }; 38 39 reserved_memory: reserved-memory { 40 #address-cells = <2>; 41 #size-cells = <2>; 42 ranges; 43 44 secure_ddr: optee@9e800000 { 45 reg = <0x00 0x9e800000 0x00 0x01800000>; 46 alignment = <0x1000>; 47 no-map; 48 }; 49 50 mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { 51 compatible = "shared-dma-pool"; 52 reg = <0x00 0xa0000000 0x00 0x100000>; 53 no-map; 54 }; 55 56 mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { 57 compatible = "shared-dma-pool"; 58 reg = <0x00 0xa0100000 0x00 0xf00000>; 59 no-map; 60 }; 61 62 mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { 63 compatible = "shared-dma-pool"; 64 reg = <0x00 0xa1000000 0x00 0x100000>; 65 no-map; 66 }; 67 68 mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { 69 compatible = "shared-dma-pool"; 70 reg = <0x00 0xa1100000 0x00 0xf00000>; 71 no-map; 72 }; 73 74 main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { 75 compatible = "shared-dma-pool"; 76 reg = <0x00 0xa2000000 0x00 0x100000>; 77 no-map; 78 }; 79 80 main_r5fss0_core0_memory_region: r5f-memory@a2100000 { 81 compatible = "shared-dma-pool"; 82 reg = <0x00 0xa2100000 0x00 0xf00000>; 83 no-map; 84 }; 85 86 main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { 87 compatible = "shared-dma-pool"; 88 reg = <0x00 0xa3000000 0x00 0x100000>; 89 no-map; 90 }; 91 92 main_r5fss0_core1_memory_region: r5f-memory@a3100000 { 93 compatible = "shared-dma-pool"; 94 reg = <0x00 0xa3100000 0x00 0xf00000>; 95 no-map; 96 }; 97 98 main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { 99 compatible = "shared-dma-pool"; 100 reg = <0x00 0xa4000000 0x00 0x100000>; 101 no-map; 102 }; 103 104 main_r5fss1_core0_memory_region: r5f-memory@a4100000 { 105 compatible = "shared-dma-pool"; 106 reg = <0x00 0xa4100000 0x00 0xf00000>; 107 no-map; 108 }; 109 110 main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { 111 compatible = "shared-dma-pool"; 112 reg = <0x00 0xa5000000 0x00 0x100000>; 113 no-map; 114 }; 115 116 main_r5fss1_core1_memory_region: r5f-memory@a5100000 { 117 compatible = "shared-dma-pool"; 118 reg = <0x00 0xa5100000 0x00 0xf00000>; 119 no-map; 120 }; 121 122 c66_1_dma_memory_region: c66-dma-memory@a6000000 { 123 compatible = "shared-dma-pool"; 124 reg = <0x00 0xa6000000 0x00 0x100000>; 125 no-map; 126 }; 127 128 c66_0_memory_region: c66-memory@a6100000 { 129 compatible = "shared-dma-pool"; 130 reg = <0x00 0xa6100000 0x00 0xf00000>; 131 no-map; 132 }; 133 134 c66_0_dma_memory_region: c66-dma-memory@a7000000 { 135 compatible = "shared-dma-pool"; 136 reg = <0x00 0xa7000000 0x00 0x100000>; 137 no-map; 138 }; 139 140 c66_1_memory_region: c66-memory@a7100000 { 141 compatible = "shared-dma-pool"; 142 reg = <0x00 0xa7100000 0x00 0xf00000>; 143 no-map; 144 }; 145 146 c71_0_dma_memory_region: c71-dma-memory@a8000000 { 147 compatible = "shared-dma-pool"; 148 reg = <0x00 0xa8000000 0x00 0x100000>; 149 no-map; 150 }; 151 152 c71_0_memory_region: c71-memory@a8100000 { 153 compatible = "shared-dma-pool"; 154 reg = <0x00 0xa8100000 0x00 0xf00000>; 155 no-map; 156 }; 157 158 rtos_ipc_memory_region: ipc-memories@aa000000 { 159 reg = <0x00 0xaa000000 0x00 0x01c00000>; 160 alignment = <0x1000>; 161 no-map; 162 }; 163 }; 164 165 vusb_main: fixedregulator-vusb-main5v0 { 166 /* USB MAIN INPUT 5V DC */ 167 compatible = "regulator-fixed"; 168 regulator-name = "vusb-main5v0"; 169 regulator-min-microvolt = <5000000>; 170 regulator-max-microvolt = <5000000>; 171 regulator-always-on; 172 regulator-boot-on; 173 }; 174 175 vsys_3v3: fixedregulator-vsys3v3 { 176 /* Output of LM5141 */ 177 compatible = "regulator-fixed"; 178 regulator-name = "vsys_3v3"; 179 regulator-min-microvolt = <3300000>; 180 regulator-max-microvolt = <3300000>; 181 vin-supply = <&vusb_main>; 182 regulator-always-on; 183 regulator-boot-on; 184 }; 185 186 vdd_mmc1: fixedregulator-sd { 187 compatible = "regulator-fixed"; 188 pinctrl-names = "default"; 189 pinctrl-0 = <&vdd_mmc1_en_pins_default>; 190 regulator-name = "vdd_mmc1"; 191 regulator-min-microvolt = <3300000>; 192 regulator-max-microvolt = <3300000>; 193 regulator-boot-on; 194 enable-active-high; 195 vin-supply = <&vsys_3v3>; 196 gpio = <&wkup_gpio0 8 GPIO_ACTIVE_HIGH>; 197 }; 198 199 vdd_sd_dv_alt: gpio-regulator-tps659411 { 200 compatible = "regulator-gpio"; 201 pinctrl-names = "default"; 202 pinctrl-0 = <&vdd_sd_dv_alt_pins_default>; 203 regulator-name = "tps659411"; 204 regulator-min-microvolt = <1800000>; 205 regulator-max-microvolt = <3300000>; 206 regulator-boot-on; 207 vin-supply = <&vsys_3v3>; 208 gpios = <&wkup_gpio0 9 GPIO_ACTIVE_HIGH>; 209 states = <1800000 0x0>, 210 <3300000 0x1>; 211 }; 212 213 dp_pwr_3v3: fixedregulator-dp-prw { 214 compatible = "regulator-fixed"; 215 regulator-name = "dp-pwr"; 216 regulator-min-microvolt = <3300000>; 217 regulator-max-microvolt = <3300000>; 218 pinctrl-names = "default"; 219 pinctrl-0 = <&dp_pwr_en_pins_default>; 220 gpio = <&main_gpio0 111 0>; /* DP0_3V3 _EN */ 221 enable-active-high; 222 }; 223 224 dp0: connector { 225 compatible = "dp-connector"; 226 label = "DP0"; 227 type = "full-size"; 228 dp-pwr-supply = <&dp_pwr_3v3>; 229 230 port { 231 dp_connector_in: endpoint { 232 remote-endpoint = <&dp0_out>; 233 }; 234 }; 235 }; 236 237 hdmi-connector { 238 compatible = "hdmi-connector"; 239 label = "hdmi"; 240 type = "a"; 241 242 pinctrl-names = "default"; 243 pinctrl-0 = <&hdmi_hpd_pins_default>; 244 245 ddc-i2c-bus = <&main_i2c1>; 246 247 /* HDMI_HPD */ 248 hpd-gpios = <&main_gpio1 0 GPIO_ACTIVE_HIGH>; 249 250 port { 251 hdmi_connector_in: endpoint { 252 remote-endpoint = <&tfp410_out>; 253 }; 254 }; 255 }; 256 257 dvi-bridge { 258 compatible = "ti,tfp410"; 259 260 pinctrl-names = "default"; 261 pinctrl-0 = <&hdmi_pdn_pins_default>; 262 263 powerdown-gpios = <&main_gpio0 127 GPIO_ACTIVE_LOW>; 264 ti,deskew = <0>; 265 266 ports { 267 #address-cells = <1>; 268 #size-cells = <0>; 269 270 port@0 { 271 reg = <0>; 272 273 tfp410_in: endpoint { 274 remote-endpoint = <&dpi1_out>; 275 pclk-sample = <1>; 276 }; 277 }; 278 279 port@1 { 280 reg = <1>; 281 282 tfp410_out: endpoint { 283 remote-endpoint = 284 <&hdmi_connector_in>; 285 }; 286 }; 287 }; 288 }; 289}; 290 291&main_pmx0 { 292 main_mmc1_pins_default: main-mmc1-default-pins { 293 pinctrl-single,pins = < 294 J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ 295 J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ 296 J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ 297 J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */ 298 J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ 299 J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */ 300 J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ 301 J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ 302 >; 303 }; 304 305 main_uart0_pins_default: main-uart0-default-pins { 306 pinctrl-single,pins = < 307 J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */ 308 J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */ 309 J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ 310 J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ 311 >; 312 }; 313 314 main_uart1_pins_default: main-uart1-default-pins { 315 pinctrl-single,pins = < 316 J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */ 317 J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */ 318 >; 319 }; 320 321 main_i2c0_pins_default: main-i2c0-default-pins { 322 pinctrl-single,pins = < 323 J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ 324 J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ 325 >; 326 }; 327 328 main_i2c1_pins_default: main-i2c1-default-pins { 329 pinctrl-single,pins = < 330 J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ 331 J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ 332 >; 333 }; 334 335 main_i2c3_pins_default: main-i2c3-default-pins { 336 pinctrl-single,pins = < 337 J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ 338 J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ 339 >; 340 }; 341 342 main_usbss0_pins_default: main-usbss0-default-pins { 343 pinctrl-single,pins = < 344 J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ 345 J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ 346 >; 347 }; 348 349 main_usbss1_pins_default: main-usbss1-default-pins { 350 pinctrl-single,pins = < 351 J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ 352 >; 353 }; 354 355 dp0_pins_default: dp0-default-pins { 356 pinctrl-single,pins = < 357 J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ 358 >; 359 }; 360 361 dp_pwr_en_pins_default: dp-pwr-en-default-pins { 362 pinctrl-single,pins = < 363 J721E_IOPAD(0x1c0, PIN_INPUT, 7) /* (AA2) SPI0_CS0.GPIO0_111 */ 364 >; 365 }; 366 367 dss_vout0_pins_default: dss-vout0-default-pins { 368 pinctrl-single,pins = < 369 J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */ 370 J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */ 371 J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */ 372 J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */ 373 J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */ 374 J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */ 375 J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */ 376 J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */ 377 J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23) PRG1_PRU1_GPO8.VOUT0_DATA8 */ 378 J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */ 379 J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */ 380 J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */ 381 J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */ 382 J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */ 383 J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */ 384 J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */ 385 J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */ 386 J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */ 387 J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */ 388 J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */ 389 J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */ 390 J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */ 391 J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */ 392 J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */ 393 J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */ 394 J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */ 395 J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */ 396 J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */ 397 >; 398 }; 399 400 hdmi_hpd_pins_default: hdmi-hpd-default-pins { 401 pinctrl-single,pins = < 402 J721E_IOPAD(0x204, PIN_INPUT, 7) /* (AD5) UART1_RTSn.GPIO1_0 */ 403 >; 404 }; 405 406 hdmi_pdn_pins_default: hdmi-pdn-default-pins { 407 pinctrl-single,pins = < 408 J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */ 409 >; 410 }; 411 412 /* Reset for M.2 E Key slot on PCIe0 */ 413 ekey_reset_pins_default: ekey-reset-pns-default-pins { 414 pinctrl-single,pins = < 415 J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */ 416 >; 417 }; 418 419 main_i2c5_pins_default: main-i2c5-default-pins { 420 pinctrl-single,pins = < 421 J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */ 422 J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */ 423 >; 424 }; 425 426 rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins { 427 pinctrl-single,pins = < 428 J721E_IOPAD(0x01C, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */ 429 J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */ 430 J721E_IOPAD(0x14C, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */ 431 J721E_IOPAD(0x02C, PIN_INPUT, 7) /* (AD21) PRG1_PRU0_GPO10.GPIO0_11 */ 432 J721E_IOPAD(0x198, PIN_INPUT, 7) /* (V25) RGMII6_TD1.GPIO0_101 */ 433 J721E_IOPAD(0x1B0, PIN_INPUT, 7) /* (W24) RGMII6_RD1.GPIO0_107 */ 434 J721E_IOPAD(0x1A0, PIN_INPUT, 7) /* (W29) RGMII6_TXC.GPIO0_103 */ 435 J721E_IOPAD(0x008, PIN_INPUT, 7) /* (AG22) PRG1_PRU0_GPO1.GPIO0_2 */ 436 J721E_IOPAD(0x1D0, PIN_INPUT, 7) /* (AA3) SPI0_D1.GPIO0_115 */ 437 J721E_IOPAD(0x11C, PIN_INPUT, 7) /* (AA24) PRG0_PRU1_GPO7.GPIO0_70 */ 438 J721E_IOPAD(0x148, PIN_INPUT, 7) /* (AA26) PRG0_PRU1_GPO18.GPIO0_81 */ 439 J721E_IOPAD(0x004, PIN_INPUT, 7) /* (AC23) PRG1_PRU0_GPO0.GPIO0_1 */ 440 J721E_IOPAD(0x014, PIN_INPUT, 7) /* (AH23) PRG1_PRU0_GPO4.GPIO0_5 */ 441 J721E_IOPAD(0x020, PIN_INPUT, 7) /* (AE20) PRG1_PRU0_GPO7.GPIO0_8 */ 442 J721E_IOPAD(0x19C, PIN_INPUT, 7) /* (W27) RGMII6_TD0.GPIO0_102 */ 443 J721E_IOPAD(0x1B4, PIN_INPUT, 7) /* (W25) RGMII6_RD0.GPIO0_108 */ 444 J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */ 445 J721E_IOPAD(0x00C, PIN_INPUT, 7) /* (AF22) PRG1_PRU0_GPO2.GPIO0_3 */ 446 J721E_IOPAD(0x010, PIN_INPUT, 7) /* (AJ23) PRG1_PRU0_GPO3.GPIO0_4 */ 447 J721E_IOPAD(0x178, PIN_INPUT, 7) /* (U27) RGMII5_RD3.GPIO0_93 */ 448 J721E_IOPAD(0x17C, PIN_INPUT, 7) /* (U24) RGMII5_RD2.GPIO0_94 */ 449 J721E_IOPAD(0x190, PIN_INPUT, 7) /* (W23) RGMII6_TD3.GPIO0_99 */ 450 J721E_IOPAD(0x18C, PIN_INPUT, 7) /* (V23) RGMII6_RX_CTL.GPIO0_98 */ 451 >; 452 }; 453 454 rpi_header_gpio1_pins_default: rpi-header-gpio1-default-pins { 455 pinctrl-single,pins = < 456 J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */ 457 >; 458 }; 459}; 460 461&wkup_pmx0 { 462 pmic_irq_pins_default: pmic-irq-default-pins { 463 pinctrl-single,pins = < 464 J721E_WKUP_IOPAD(0x0cc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ 465 >; 466 }; 467 468 mcu_cpsw_pins_default: mcu-cpsw-default-pins { 469 pinctrl-single,pins = < 470 J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ 471 J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */ 472 J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */ 473 J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */ 474 J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */ 475 J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */ 476 J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */ 477 J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */ 478 J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */ 479 J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */ 480 J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */ 481 J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */ 482 >; 483 }; 484 485 mcu_mdio_pins_default: mcu-mdio1-default-pins { 486 pinctrl-single,pins = < 487 J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */ 488 J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */ 489 >; 490 }; 491 492 mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { 493 pinctrl-single,pins = < 494 J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 0) /* (E20) MCU_OSPI0_CLK */ 495 J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 0) /* (F19) MCU_OSPI0_CSn0 */ 496 J721E_WKUP_IOPAD(0xc, PIN_INPUT, 0) /* (D20) MCU_OSPI0_D0 */ 497 J721E_WKUP_IOPAD(0x10, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D1 */ 498 J721E_WKUP_IOPAD(0x14, PIN_INPUT, 0) /* (G20) MCU_OSPI0_D2 */ 499 J721E_WKUP_IOPAD(0x18, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D3 */ 500 J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 0) /* (F21) MCU_OSPI0_D4 */ 501 J721E_WKUP_IOPAD(0x20, PIN_INPUT, 0) /* (E21) MCU_OSPI0_D5 */ 502 J721E_WKUP_IOPAD(0x24, PIN_INPUT, 0) /* (B22) MCU_OSPI0_D6 */ 503 J721E_WKUP_IOPAD(0x28, PIN_INPUT, 0) /* (G21) MCU_OSPI0_D7 */ 504 J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21) MCU_OSPI0_DQS */ 505 >; 506 }; 507 508 vdd_mmc1_en_pins_default: vdd-mmc1-en-default-pins { 509 pinctrl-single,pins = < 510 J721E_WKUP_IOPAD(0xd0, PIN_OUTPUT, 7) /* (G27) WKUP_GPIO0_8 */ 511 >; 512 }; 513 514 vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { 515 pinctrl-single,pins = < 516 J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */ 517 >; 518 }; 519 520 wkup_uart0_pins_default: wkup-uart0-default-pins { 521 pinctrl-single,pins = < 522 J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ 523 J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ 524 >; 525 }; 526 527 mcu_uart0_pins_default: mcu-uart0-default-pins { 528 pinctrl-single,pins = < 529 J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 2) /* (D26) MCU_I3C0_SCL.MCU_UART0_CTSn */ 530 J721E_WKUP_IOPAD(0xf4, PIN_OUTPUT, 2)/* (D25) MCU_I3C0_SDA.MCU_UART0_RTSn */ 531 J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ 532 J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0)/* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ 533 >; 534 }; 535 536 wkup_i2c0_pins_default: wkup-i2c0-default-pins { 537 pinctrl-single,pins = < 538 J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ 539 J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ 540 >; 541 }; 542 543 /* Reset for M.2 M Key slot on PCIe1 */ 544 mkey_reset_pins_default: mkey-reset-pns-default-pins { 545 pinctrl-single,pins = < 546 J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* (H27) WKUP_GPIO0_11 */ 547 >; 548 }; 549}; 550 551&wkup_uart0 { 552 /* Wakeup UART is used by System firmware */ 553 status = "reserved"; 554 pinctrl-names = "default"; 555 pinctrl-0 = <&wkup_uart0_pins_default>; 556}; 557 558&wkup_i2c0 { 559 status = "okay"; 560 pinctrl-names = "default"; 561 pinctrl-0 = <&wkup_i2c0_pins_default>; 562 clock-frequency = <400000>; 563 564 eeprom@51 { 565 /* AT24C512C-MAHM-T */ 566 compatible = "atmel,24c512"; 567 reg = <0x51>; 568 }; 569 570 tps659413: pmic@48 { 571 compatible = "ti,tps6594-q1"; 572 reg = <0x48>; 573 system-power-controller; 574 pinctrl-names = "default"; 575 pinctrl-0 = <&pmic_irq_pins_default>; 576 interrupt-parent = <&wkup_gpio0>; 577 interrupts = <9 IRQ_TYPE_EDGE_FALLING>; 578 gpio-controller; 579 #gpio-cells = <2>; 580 ti,primary-pmic; 581 buck123-supply = <&vsys_3v3>; 582 buck4-supply = <&vsys_3v3>; 583 buck5-supply = <&vsys_3v3>; 584 ldo1-supply = <&vsys_3v3>; 585 ldo2-supply = <&vsys_3v3>; 586 ldo3-supply = <&vsys_3v3>; 587 ldo4-supply = <&vsys_3v3>; 588 589 regulators { 590 bucka123: buck123 { 591 regulator-name = "vdd_cpu_avs"; 592 regulator-min-microvolt = <600000>; 593 regulator-max-microvolt = <900000>; 594 regulator-boot-on; 595 regulator-always-on; 596 bootph-pre-ram; 597 }; 598 599 bucka4: buck4 { 600 regulator-name = "vdd_mcu_0v85"; 601 regulator-min-microvolt = <850000>; 602 regulator-max-microvolt = <850000>; 603 regulator-boot-on; 604 regulator-always-on; 605 }; 606 607 bucka5: buck5 { 608 regulator-name = "vdd_phyio_1v8"; 609 regulator-min-microvolt = <1800000>; 610 regulator-max-microvolt = <1800000>; 611 regulator-boot-on; 612 regulator-always-on; 613 }; 614 615 ldoa1: ldo1 { 616 regulator-name = "vdd1_lpddr4_1v8"; 617 regulator-min-microvolt = <1800000>; 618 regulator-max-microvolt = <1800000>; 619 regulator-boot-on; 620 regulator-always-on; 621 }; 622 623 ldoa2: ldo2 { 624 regulator-name = "vdd_mcuio_1v8"; 625 regulator-min-microvolt = <1800000>; 626 regulator-max-microvolt = <1800000>; 627 regulator-boot-on; 628 regulator-always-on; 629 }; 630 631 ldoa3: ldo3 { 632 regulator-name = "vdda_dll_0v8"; 633 regulator-min-microvolt = <800000>; 634 regulator-max-microvolt = <800000>; 635 regulator-boot-on; 636 regulator-always-on; 637 }; 638 639 ldoa4: ldo4 { 640 regulator-name = "vda_mcu_1v8"; 641 regulator-min-microvolt = <1800000>; 642 regulator-max-microvolt = <1800000>; 643 regulator-boot-on; 644 regulator-always-on; 645 }; 646 }; 647 }; 648 649 tps659411: pmic@4c { 650 compatible = "ti,tps6594-q1"; 651 reg = <0x4c>; 652 system-power-controller; 653 interrupt-parent = <&wkup_gpio0>; 654 interrupts = <9 IRQ_TYPE_EDGE_FALLING>; 655 gpio-controller; 656 #gpio-cells = <2>; 657 buck1234-supply = <&vsys_3v3>; 658 buck5-supply = <&vsys_3v3>; 659 ldo1-supply = <&vsys_3v3>; 660 ldo2-supply = <&vsys_3v3>; 661 ldo3-supply = <&vsys_3v3>; 662 ldo4-supply = <&vsys_3v3>; 663 664 regulators { 665 buckb1234: buck1234 { 666 regulator-name = "vdd_core_0v8"; 667 regulator-min-microvolt = <800000>; 668 regulator-max-microvolt = <800000>; 669 regulator-boot-on; 670 regulator-always-on; 671 }; 672 673 buckb5: buck5 { 674 regulator-name = "vdd_ram_0v85"; 675 regulator-min-microvolt = <850000>; 676 regulator-max-microvolt = <850000>; 677 regulator-boot-on; 678 regulator-always-on; 679 }; 680 681 ldob1: ldo1 { 682 regulator-name = "vdd_sd_dv"; 683 regulator-min-microvolt = <1800000>; 684 regulator-max-microvolt = <3300000>; 685 regulator-boot-on; 686 regulator-always-on; 687 }; 688 689 ldob2: ldo2 { 690 regulator-name = "vdd_usb_3v3"; 691 regulator-min-microvolt = <3300000>; 692 regulator-max-microvolt = <3300000>; 693 regulator-boot-on; 694 regulator-always-on; 695 }; 696 697 ldob3: ldo3 { 698 regulator-name = "vdd_io_1v8"; 699 regulator-min-microvolt = <1800000>; 700 regulator-max-microvolt = <1800000>; 701 regulator-boot-on; 702 regulator-always-on; 703 }; 704 705 ldob4: ldo4 { 706 regulator-name = "vda_pll_1v8"; 707 regulator-min-microvolt = <1800000>; 708 regulator-max-microvolt = <1800000>; 709 regulator-boot-on; 710 regulator-always-on; 711 }; 712 }; 713 }; 714}; 715 716&mcu_uart0 { 717 status = "okay"; 718 pinctrl-names = "default"; 719 pinctrl-0 = <&mcu_uart0_pins_default>; 720}; 721 722&main_uart0 { 723 status = "okay"; 724 pinctrl-names = "default"; 725 pinctrl-0 = <&main_uart0_pins_default>; 726 /* Shared with ATF on this platform */ 727 power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; 728}; 729 730&main_uart1 { 731 status = "okay"; 732 pinctrl-names = "default"; 733 pinctrl-0 = <&main_uart1_pins_default>; 734}; 735 736&main_sdhci1 { 737 /* SD Card */ 738 status = "okay"; 739 vmmc-supply = <&vdd_mmc1>; 740 vqmmc-supply = <&vdd_sd_dv_alt>; 741 pinctrl-names = "default"; 742 pinctrl-0 = <&main_mmc1_pins_default>; 743 ti,driver-strength-ohm = <50>; 744 disable-wp; 745}; 746 747&ospi0 { 748 status = "okay"; 749 pinctrl-names = "default"; 750 pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; 751 752 flash@0 { 753 compatible = "jedec,spi-nor"; 754 reg = <0x0>; 755 spi-tx-bus-width = <8>; 756 spi-rx-bus-width = <8>; 757 spi-max-frequency = <25000000>; 758 cdns,tshsl-ns = <60>; 759 cdns,tsd2d-ns = <60>; 760 cdns,tchsh-ns = <60>; 761 cdns,tslch-ns = <60>; 762 cdns,read-delay = <4>; 763 764 partitions { 765 compatible = "fixed-partitions"; 766 #address-cells = <1>; 767 #size-cells = <1>; 768 769 partition@0 { 770 label = "ospi.tiboot3"; 771 reg = <0x0 0x80000>; 772 }; 773 774 partition@80000 { 775 label = "ospi.tispl"; 776 reg = <0x80000 0x200000>; 777 }; 778 779 partition@280000 { 780 label = "ospi.u-boot"; 781 reg = <0x280000 0x400000>; 782 }; 783 784 partition@680000 { 785 label = "ospi.env"; 786 reg = <0x680000 0x40000>; 787 }; 788 789 partition@6c0000 { 790 label = "ospi.sysfw"; 791 reg = <0x6c0000 0x100000>; 792 }; 793 794 partition@7c0000 { 795 label = "ospi.env.backup"; 796 reg = <0x7c0000 0x40000>; 797 }; 798 799 partition@800000 { 800 label = "ospi.rootfs"; 801 reg = <0x800000 0x37c0000>; 802 }; 803 804 partition@3fc0000 { 805 label = "ospi.phypattern"; 806 reg = <0x3fc0000 0x40000>; 807 }; 808 }; 809 }; 810}; 811 812&main_i2c0 { 813 status = "okay"; 814 pinctrl-names = "default"; 815 pinctrl-0 = <&main_i2c0_pins_default>; 816 clock-frequency = <400000>; 817 818 i2c-mux@71 { 819 compatible = "nxp,pca9543"; 820 #address-cells = <1>; 821 #size-cells = <0>; 822 reg = <0x71>; 823 824 /* PCIe1 M.2 M Key I2C */ 825 i2c@0 { 826 #address-cells = <1>; 827 #size-cells = <0>; 828 reg = <0>; 829 }; 830 831 /* PCIe0 M.2 E Key I2C */ 832 i2c@1 { 833 #address-cells = <1>; 834 #size-cells = <0>; 835 reg = <1>; 836 }; 837 }; 838}; 839 840&main_i2c1 { 841 status = "okay"; 842 pinctrl-names = "default"; 843 pinctrl-0 = <&main_i2c1_pins_default>; 844 /* i2c1 is used for DVI DDC, so we need to use 100kHz */ 845 clock-frequency = <100000>; 846}; 847 848&main_i2c3 { 849 status = "okay"; 850 pinctrl-names = "default"; 851 pinctrl-0 = <&main_i2c3_pins_default>; 852 clock-frequency = <400000>; 853 854 i2c-mux@70 { 855 compatible = "nxp,pca9543"; 856 #address-cells = <1>; 857 #size-cells = <0>; 858 reg = <0x70>; 859 860 /* CSI0 I2C */ 861 i2c@0 { 862 #address-cells = <1>; 863 #size-cells = <0>; 864 reg = <0>; 865 }; 866 867 /* CSI1 I2C */ 868 i2c@1 { 869 #address-cells = <1>; 870 #size-cells = <0>; 871 reg = <1>; 872 }; 873 }; 874}; 875 876&main_i2c5 { 877 /* Brought out on RPi Header */ 878 status = "okay"; 879 pinctrl-names = "default"; 880 pinctrl-0 = <&main_i2c5_pins_default>; 881 clock-frequency = <400000>; 882}; 883 884&main_gpio0 { 885 status = "okay"; 886 pinctrl-names = "default"; 887 pinctrl-0 = <&rpi_header_gpio0_pins_default>; 888}; 889 890&main_gpio1 { 891 status = "okay"; 892 pinctrl-names = "default"; 893 pinctrl-0 = <&rpi_header_gpio1_pins_default>; 894}; 895 896&wkup_gpio0 { 897 status = "okay"; 898}; 899 900&usb_serdes_mux { 901 idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ 902}; 903 904&serdes_ln_ctrl { 905 idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_IP4_UNUSED>, 906 <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>, 907 <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>, 908 <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>, 909 <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>, 910 <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>; 911}; 912 913&serdes_wiz3 { 914 typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>; 915 typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */ 916}; 917 918&serdes3 { 919 serdes3_usb_link: phy@0 { 920 reg = <0>; 921 cdns,num-lanes = <2>; 922 #phy-cells = <0>; 923 cdns,phy-type = <PHY_TYPE_USB3>; 924 resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>; 925 }; 926}; 927 928&serdes4 { 929 torrent_phy_dp: phy@0 { 930 reg = <0>; 931 resets = <&serdes_wiz4 1>; 932 cdns,phy-type = <PHY_TYPE_DP>; 933 cdns,num-lanes = <4>; 934 cdns,max-bit-rate = <5400>; 935 #phy-cells = <0>; 936 }; 937}; 938 939&mhdp { 940 phys = <&torrent_phy_dp>; 941 phy-names = "dpphy"; 942 pinctrl-names = "default"; 943 pinctrl-0 = <&dp0_pins_default>; 944}; 945 946&usbss0 { 947 pinctrl-names = "default"; 948 pinctrl-0 = <&main_usbss0_pins_default>; 949 ti,vbus-divider; 950}; 951 952&usb0 { 953 dr_mode = "otg"; 954 maximum-speed = "super-speed"; 955 phys = <&serdes3_usb_link>; 956 phy-names = "cdns3,usb3-phy"; 957}; 958 959&serdes2 { 960 serdes2_usb_link: phy@1 { 961 reg = <1>; 962 cdns,num-lanes = <1>; 963 #phy-cells = <0>; 964 cdns,phy-type = <PHY_TYPE_USB3>; 965 resets = <&serdes_wiz2 2>; 966 }; 967}; 968 969&usbss1 { 970 pinctrl-names = "default"; 971 pinctrl-0 = <&main_usbss1_pins_default>; 972 ti,vbus-divider; 973}; 974 975&usb1 { 976 dr_mode = "host"; 977 maximum-speed = "super-speed"; 978 phys = <&serdes2_usb_link>; 979 phy-names = "cdns3,usb3-phy"; 980}; 981 982&mcu_cpsw { 983 pinctrl-names = "default"; 984 pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; 985}; 986 987&davinci_mdio { 988 phy0: ethernet-phy@0 { 989 reg = <0>; 990 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 991 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 992 }; 993}; 994 995&cpsw_port1 { 996 phy-mode = "rgmii-rxid"; 997 phy-handle = <&phy0>; 998}; 999 1000&dss { 1001 pinctrl-names = "default"; 1002 pinctrl-0 = <&dss_vout0_pins_default>; 1003 1004 assigned-clocks = <&k3_clks 152 1>, /* VP 1 pixel clock */ 1005 <&k3_clks 152 4>, /* VP 2 pixel clock */ 1006 <&k3_clks 152 9>, /* VP 3 pixel clock */ 1007 <&k3_clks 152 13>; /* VP 4 pixel clock */ 1008 assigned-clock-parents = <&k3_clks 152 2>, /* PLL16_HSDIV0 */ 1009 <&k3_clks 152 6>, /* DPI0_EXT_CLKSEL_OUT0 */ 1010 <&k3_clks 152 11>, /* PLL18_HSDIV0 */ 1011 <&k3_clks 152 18>; /* DPI1_EXT_CLKSEL_OUT0 */ 1012}; 1013 1014&dss_ports { 1015 #address-cells = <1>; 1016 #size-cells = <0>; 1017 1018 port@0 { 1019 reg = <0>; 1020 1021 dpi0_out: endpoint { 1022 remote-endpoint = <&dp0_in>; 1023 }; 1024 }; 1025 1026 port@1 { 1027 reg = <1>; 1028 1029 dpi1_out: endpoint { 1030 remote-endpoint = <&tfp410_in>; 1031 }; 1032 }; 1033}; 1034 1035&dp0_ports { 1036 #address-cells = <1>; 1037 #size-cells = <0>; 1038 1039 port@0 { 1040 reg = <0>; 1041 dp0_in: endpoint { 1042 remote-endpoint = <&dpi0_out>; 1043 }; 1044 }; 1045 1046 port@4 { 1047 reg = <4>; 1048 dp0_out: endpoint { 1049 remote-endpoint = <&dp_connector_in>; 1050 }; 1051 }; 1052}; 1053 1054&serdes0 { 1055 serdes0_pcie_link: phy@0 { 1056 reg = <0>; 1057 cdns,num-lanes = <1>; 1058 #phy-cells = <0>; 1059 cdns,phy-type = <PHY_TYPE_PCIE>; 1060 resets = <&serdes_wiz0 1>; 1061 }; 1062}; 1063 1064&serdes1 { 1065 serdes1_pcie_link: phy@0 { 1066 reg = <0>; 1067 cdns,num-lanes = <2>; 1068 #phy-cells = <0>; 1069 cdns,phy-type = <PHY_TYPE_PCIE>; 1070 resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; 1071 }; 1072}; 1073 1074&pcie0_rc { 1075 status = "okay"; 1076 pinctrl-names = "default"; 1077 pinctrl-0 = <&ekey_reset_pins_default>; 1078 reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_HIGH>; 1079 1080 phys = <&serdes0_pcie_link>; 1081 phy-names = "pcie-phy"; 1082 num-lanes = <1>; 1083}; 1084 1085&pcie1_rc { 1086 status = "okay"; 1087 pinctrl-names = "default"; 1088 pinctrl-0 = <&mkey_reset_pins_default>; 1089 reset-gpios = <&wkup_gpio0 11 GPIO_ACTIVE_HIGH>; 1090 1091 phys = <&serdes1_pcie_link>; 1092 phy-names = "pcie-phy"; 1093 num-lanes = <2>; 1094}; 1095 1096&ufs_wrapper { 1097 status = "disabled"; 1098}; 1099 1100&mailbox0_cluster0 { 1101 status = "okay"; 1102 interrupts = <436>; 1103 1104 mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { 1105 ti,mbox-rx = <0 0 0>; 1106 ti,mbox-tx = <1 0 0>; 1107 }; 1108 1109 mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { 1110 ti,mbox-rx = <2 0 0>; 1111 ti,mbox-tx = <3 0 0>; 1112 }; 1113}; 1114 1115&mailbox0_cluster1 { 1116 status = "okay"; 1117 interrupts = <432>; 1118 1119 mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { 1120 ti,mbox-rx = <0 0 0>; 1121 ti,mbox-tx = <1 0 0>; 1122 }; 1123 1124 mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { 1125 ti,mbox-rx = <2 0 0>; 1126 ti,mbox-tx = <3 0 0>; 1127 }; 1128}; 1129 1130&mailbox0_cluster2 { 1131 status = "okay"; 1132 interrupts = <428>; 1133 1134 mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { 1135 ti,mbox-rx = <0 0 0>; 1136 ti,mbox-tx = <1 0 0>; 1137 }; 1138 1139 mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { 1140 ti,mbox-rx = <2 0 0>; 1141 ti,mbox-tx = <3 0 0>; 1142 }; 1143}; 1144 1145&mailbox0_cluster3 { 1146 status = "okay"; 1147 interrupts = <424>; 1148 1149 mbox_c66_0: mbox-c66-0 { 1150 ti,mbox-rx = <0 0 0>; 1151 ti,mbox-tx = <1 0 0>; 1152 }; 1153 1154 mbox_c66_1: mbox-c66-1 { 1155 ti,mbox-rx = <2 0 0>; 1156 ti,mbox-tx = <3 0 0>; 1157 }; 1158}; 1159 1160&mailbox0_cluster4 { 1161 status = "okay"; 1162 interrupts = <420>; 1163 1164 mbox_c71_0: mbox-c71-0 { 1165 ti,mbox-rx = <0 0 0>; 1166 ti,mbox-tx = <1 0 0>; 1167 }; 1168}; 1169 1170&mcu_r5fss0_core0 { 1171 mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>; 1172 memory-region = <&mcu_r5fss0_core0_dma_memory_region>, 1173 <&mcu_r5fss0_core0_memory_region>; 1174}; 1175 1176&mcu_r5fss0_core1 { 1177 mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>; 1178 memory-region = <&mcu_r5fss0_core1_dma_memory_region>, 1179 <&mcu_r5fss0_core1_memory_region>; 1180}; 1181 1182&main_r5fss0_core0 { 1183 mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>; 1184 memory-region = <&main_r5fss0_core0_dma_memory_region>, 1185 <&main_r5fss0_core0_memory_region>; 1186}; 1187 1188&main_r5fss0_core1 { 1189 mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>; 1190 memory-region = <&main_r5fss0_core1_dma_memory_region>, 1191 <&main_r5fss0_core1_memory_region>; 1192}; 1193 1194&main_r5fss1_core0 { 1195 mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>; 1196 memory-region = <&main_r5fss1_core0_dma_memory_region>, 1197 <&main_r5fss1_core0_memory_region>; 1198}; 1199 1200&main_r5fss1_core1 { 1201 mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>; 1202 memory-region = <&main_r5fss1_core1_dma_memory_region>, 1203 <&main_r5fss1_core1_memory_region>; 1204}; 1205 1206&c66_0 { 1207 status = "okay"; 1208 mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>; 1209 memory-region = <&c66_0_dma_memory_region>, 1210 <&c66_0_memory_region>; 1211}; 1212 1213&c66_1 { 1214 status = "okay"; 1215 mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>; 1216 memory-region = <&c66_1_dma_memory_region>, 1217 <&c66_1_memory_region>; 1218}; 1219 1220&c71_0 { 1221 status = "okay"; 1222 mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>; 1223 memory-region = <&c71_0_dma_memory_region>, 1224 <&c71_0_memory_region>; 1225}; 1226