1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6/dts-v1/; 7 8#include "k3-am654.dtsi" 9#include <dt-bindings/input/input.h> 10#include <dt-bindings/net/ti-dp83867.h> 11 12/ { 13 compatible = "ti,am654-evm", "ti,am654"; 14 model = "Texas Instruments AM654 Base Board"; 15 16 chosen { 17 stdout-path = "serial2:115200n8"; 18 bootargs = "earlycon=ns16550a,mmio32,0x02800000"; 19 }; 20 21 memory@80000000 { 22 device_type = "memory"; 23 /* 4G RAM */ 24 reg = <0x00000000 0x80000000 0x00000000 0x80000000>, 25 <0x00000008 0x80000000 0x00000000 0x80000000>; 26 }; 27 28 reserved-memory { 29 #address-cells = <2>; 30 #size-cells = <2>; 31 ranges; 32 secure_ddr: secure-ddr@9e800000 { 33 reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ 34 alignment = <0x1000>; 35 no-map; 36 }; 37 }; 38 39 gpio-keys { 40 compatible = "gpio-keys"; 41 autorepeat; 42 pinctrl-names = "default"; 43 pinctrl-0 = <&push_button_pins_default>; 44 45 sw5 { 46 label = "GPIO Key USER1"; 47 linux,code = <BTN_0>; 48 gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>; 49 }; 50 51 sw6 { 52 label = "GPIO Key USER2"; 53 linux,code = <BTN_1>; 54 gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; 55 }; 56 }; 57 58 clk_ov5640_fixed: clock { 59 compatible = "fixed-clock"; 60 #clock-cells = <0>; 61 clock-frequency = <24000000>; 62 }; 63}; 64 65&wkup_pmx0 { 66 wkup_i2c0_pins_default: wkup-i2c0-pins-default { 67 pinctrl-single,pins = < 68 AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ 69 AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ 70 >; 71 }; 72 73 push_button_pins_default: push-button-pins-default { 74 pinctrl-single,pins = < 75 AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ 76 AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ 77 >; 78 }; 79 80 mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { 81 pinctrl-single,pins = < 82 AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ 83 AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ 84 AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */ 85 AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */ 86 AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */ 87 AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */ 88 AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */ 89 AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */ 90 AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */ 91 AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */ 92 AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ 93 >; 94 }; 95 96 wkup_pca554_default: wkup-pca554-default { 97 pinctrl-single,pins = < 98 AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ 99 >; 100 }; 101 102 mcu_cpsw_pins_default: mcu-cpsw-pins-default { 103 pinctrl-single,pins = < 104 AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */ 105 AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */ 106 AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */ 107 AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */ 108 AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */ 109 AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */ 110 AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */ 111 AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */ 112 AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */ 113 AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */ 114 AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */ 115 AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */ 116 >; 117 }; 118 119 mcu_mdio_pins_default: mcu-mdio1-pins-default { 120 pinctrl-single,pins = < 121 AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ 122 AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ 123 >; 124 }; 125}; 126 127&main_pmx0 { 128 main_uart0_pins_default: main-uart0-pins-default { 129 pinctrl-single,pins = < 130 AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ 131 AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ 132 AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ 133 AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ 134 >; 135 }; 136 137 main_i2c2_pins_default: main-i2c2-pins-default { 138 pinctrl-single,pins = < 139 AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */ 140 AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */ 141 >; 142 }; 143 144 main_spi0_pins_default: main-spi0-pins-default { 145 pinctrl-single,pins = < 146 AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */ 147 AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */ 148 AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */ 149 AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */ 150 >; 151 }; 152 153 main_mmc0_pins_default: main-mmc0-pins-default { 154 pinctrl-single,pins = < 155 AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ 156 AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ 157 AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ 158 AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ 159 AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ 160 AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ 161 AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ 162 AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ 163 AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ 164 AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ 165 AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ 166 AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ 167 >; 168 }; 169 170 main_mmc1_pins_default: main-mmc1-pins-default { 171 pinctrl-single,pins = < 172 AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ 173 AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ 174 AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ 175 AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ 176 AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ 177 AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ 178 AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ 179 AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ 180 >; 181 }; 182 183 usb1_pins_default: usb1-pins-default { 184 pinctrl-single,pins = < 185 AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ 186 >; 187 }; 188}; 189 190&main_pmx1 { 191 main_i2c0_pins_default: main-i2c0-pins-default { 192 pinctrl-single,pins = < 193 AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ 194 AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ 195 >; 196 }; 197 198 main_i2c1_pins_default: main-i2c1-pins-default { 199 pinctrl-single,pins = < 200 AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ 201 AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ 202 >; 203 }; 204 205 ecap0_pins_default: ecap0-pins-default { 206 pinctrl-single,pins = < 207 AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ 208 >; 209 }; 210}; 211 212&wkup_uart0 { 213 /* Wakeup UART is used by System firmware */ 214 status = "disabled"; 215}; 216 217&main_uart0 { 218 pinctrl-names = "default"; 219 pinctrl-0 = <&main_uart0_pins_default>; 220 power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; 221}; 222 223&wkup_i2c0 { 224 pinctrl-names = "default"; 225 pinctrl-0 = <&wkup_i2c0_pins_default>; 226 clock-frequency = <400000>; 227 228 pca9554: gpio@39 { 229 compatible = "nxp,pca9554"; 230 reg = <0x39>; 231 gpio-controller; 232 #gpio-cells = <2>; 233 pinctrl-names = "default"; 234 pinctrl-0 = <&wkup_pca554_default>; 235 interrupt-parent = <&wkup_gpio0>; 236 interrupts = <25 IRQ_TYPE_EDGE_FALLING>; 237 interrupt-controller; 238 #interrupt-cells = <2>; 239 }; 240}; 241 242&main_i2c0 { 243 pinctrl-names = "default"; 244 pinctrl-0 = <&main_i2c0_pins_default>; 245 clock-frequency = <400000>; 246 247 pca9555: gpio@21 { 248 compatible = "nxp,pca9555"; 249 reg = <0x21>; 250 gpio-controller; 251 #gpio-cells = <2>; 252 }; 253}; 254 255&main_i2c1 { 256 pinctrl-names = "default"; 257 pinctrl-0 = <&main_i2c1_pins_default>; 258 clock-frequency = <400000>; 259 260 ov5640: camera@3c { 261 compatible = "ovti,ov5640"; 262 reg = <0x3c>; 263 264 clocks = <&clk_ov5640_fixed>; 265 clock-names = "xclk"; 266 267 port { 268 csi2_cam0: endpoint { 269 remote-endpoint = <&csi2_phy0>; 270 clock-lanes = <0>; 271 data-lanes = <1 2>; 272 }; 273 }; 274 }; 275 276}; 277 278&main_i2c2 { 279 pinctrl-names = "default"; 280 pinctrl-0 = <&main_i2c2_pins_default>; 281 clock-frequency = <400000>; 282}; 283 284&ecap0 { 285 pinctrl-names = "default"; 286 pinctrl-0 = <&ecap0_pins_default>; 287}; 288 289&main_spi0 { 290 pinctrl-names = "default"; 291 pinctrl-0 = <&main_spi0_pins_default>; 292 #address-cells = <1>; 293 #size-cells= <0>; 294 ti,pindir-d0-out-d1-in = <1>; 295 296 flash@0{ 297 compatible = "jedec,spi-nor"; 298 reg = <0x0>; 299 spi-tx-bus-width = <1>; 300 spi-rx-bus-width = <1>; 301 spi-max-frequency = <48000000>; 302 #address-cells = <1>; 303 #size-cells= <1>; 304 }; 305}; 306 307&sdhci0 { 308 pinctrl-names = "default"; 309 pinctrl-0 = <&main_mmc0_pins_default>; 310 bus-width = <8>; 311 non-removable; 312 ti,driver-strength-ohm = <50>; 313 disable-wp; 314}; 315 316/* 317 * Because of erratas i2025 and i2026 for silicon revision 1.0, the 318 * SD card interface might fail. Boards with sr1.0 are recommended to 319 * disable sdhci1 320 */ 321&sdhci1 { 322 pinctrl-names = "default"; 323 pinctrl-0 = <&main_mmc1_pins_default>; 324 ti,driver-strength-ohm = <50>; 325 disable-wp; 326}; 327 328&dwc3_1 { 329 status = "okay"; 330}; 331 332&usb1_phy { 333 status = "okay"; 334}; 335 336&usb1 { 337 pinctrl-names = "default"; 338 pinctrl-0 = <&usb1_pins_default>; 339 dr_mode = "otg"; 340}; 341 342&dwc3_0 { 343 status = "disabled"; 344}; 345 346&usb0_phy { 347 status = "disabled"; 348}; 349 350&tscadc0 { 351 adc { 352 ti,adc-channels = <0 1 2 3 4 5 6 7>; 353 }; 354}; 355 356&tscadc1 { 357 adc { 358 ti,adc-channels = <0 1 2 3 4 5 6 7>; 359 }; 360}; 361 362&serdes0 { 363 status = "disabled"; 364}; 365 366&serdes1 { 367 status = "disabled"; 368}; 369 370&pcie0_rc { 371 status = "disabled"; 372}; 373 374&pcie0_ep { 375 status = "disabled"; 376}; 377 378&pcie1_rc { 379 status = "disabled"; 380}; 381 382&pcie1_ep { 383 status = "disabled"; 384}; 385 386&mailbox0_cluster0 { 387 interrupts = <436>; 388 389 mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { 390 ti,mbox-tx = <1 0 0>; 391 ti,mbox-rx = <0 0 0>; 392 }; 393}; 394 395&mailbox0_cluster1 { 396 interrupts = <432>; 397 398 mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { 399 ti,mbox-tx = <1 0 0>; 400 ti,mbox-rx = <0 0 0>; 401 }; 402}; 403 404&mailbox0_cluster2 { 405 status = "disabled"; 406}; 407 408&mailbox0_cluster3 { 409 status = "disabled"; 410}; 411 412&mailbox0_cluster4 { 413 status = "disabled"; 414}; 415 416&mailbox0_cluster5 { 417 status = "disabled"; 418}; 419 420&mailbox0_cluster6 { 421 status = "disabled"; 422}; 423 424&mailbox0_cluster7 { 425 status = "disabled"; 426}; 427 428&mailbox0_cluster8 { 429 status = "disabled"; 430}; 431 432&mailbox0_cluster9 { 433 status = "disabled"; 434}; 435 436&mailbox0_cluster10 { 437 status = "disabled"; 438}; 439 440&mailbox0_cluster11 { 441 status = "disabled"; 442}; 443 444&ospi0 { 445 pinctrl-names = "default"; 446 pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; 447 448 flash@0{ 449 compatible = "jedec,spi-nor"; 450 reg = <0x0>; 451 spi-tx-bus-width = <1>; 452 spi-rx-bus-width = <8>; 453 spi-max-frequency = <40000000>; 454 cdns,tshsl-ns = <60>; 455 cdns,tsd2d-ns = <60>; 456 cdns,tchsh-ns = <60>; 457 cdns,tslch-ns = <60>; 458 cdns,read-delay = <0>; 459 #address-cells = <1>; 460 #size-cells = <1>; 461 }; 462}; 463 464&csi2_0 { 465 csi2_phy0: endpoint { 466 remote-endpoint = <&csi2_cam0>; 467 clock-lanes = <0>; 468 data-lanes = <1 2>; 469 }; 470}; 471 472&mcu_cpsw { 473 pinctrl-names = "default"; 474 pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; 475}; 476 477&davinci_mdio { 478 phy0: ethernet-phy@0 { 479 reg = <0>; 480 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 481 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 482 }; 483}; 484 485&cpsw_port1 { 486 phy-mode = "rgmii-rxid"; 487 phy-handle = <&phy0>; 488}; 489