xref: /freebsd/sys/contrib/device-tree/src/arm64/ti/k3-am642-sk.dts (revision af23369a6deaaeb612ab266eb88b8bb8d560c322)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/mux/ti-serdes.h>
9#include <dt-bindings/phy/phy.h>
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/net/ti-dp83867.h>
12#include "k3-am642.dtsi"
13
14/ {
15	compatible = "ti,am642-sk", "ti,am642";
16	model = "Texas Instruments AM642 SK";
17
18	chosen {
19		stdout-path = "serial2:115200n8";
20		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
21	};
22
23	memory@80000000 {
24		device_type = "memory";
25		/* 2G RAM */
26		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
27
28	};
29
30	reserved-memory {
31		#address-cells = <2>;
32		#size-cells = <2>;
33		ranges;
34
35		secure_ddr: optee@9e800000 {
36			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
37			alignment = <0x1000>;
38			no-map;
39		};
40
41		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
42			compatible = "shared-dma-pool";
43			reg = <0x00 0xa0000000 0x00 0x100000>;
44			no-map;
45		};
46
47		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
48			compatible = "shared-dma-pool";
49			reg = <0x00 0xa0100000 0x00 0xf00000>;
50			no-map;
51		};
52
53		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
54			compatible = "shared-dma-pool";
55			reg = <0x00 0xa1000000 0x00 0x100000>;
56			no-map;
57		};
58
59		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
60			compatible = "shared-dma-pool";
61			reg = <0x00 0xa1100000 0x00 0xf00000>;
62			no-map;
63		};
64
65		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
66			compatible = "shared-dma-pool";
67			reg = <0x00 0xa2000000 0x00 0x100000>;
68			no-map;
69		};
70
71		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
72			compatible = "shared-dma-pool";
73			reg = <0x00 0xa2100000 0x00 0xf00000>;
74			no-map;
75		};
76
77		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
78			compatible = "shared-dma-pool";
79			reg = <0x00 0xa3000000 0x00 0x100000>;
80			no-map;
81		};
82
83		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
84			compatible = "shared-dma-pool";
85			reg = <0x00 0xa3100000 0x00 0xf00000>;
86			no-map;
87		};
88
89		rtos_ipc_memory_region: ipc-memories@a5000000 {
90			reg = <0x00 0xa5000000 0x00 0x00800000>;
91			alignment = <0x1000>;
92			no-map;
93		};
94	};
95
96	vusb_main: fixed-regulator-vusb-main5v0 {
97		/* USB MAIN INPUT 5V DC */
98		compatible = "regulator-fixed";
99		regulator-name = "vusb_main5v0";
100		regulator-min-microvolt = <5000000>;
101		regulator-max-microvolt = <5000000>;
102		regulator-always-on;
103		regulator-boot-on;
104	};
105
106	vcc_3v3_sys: fixedregulator-vcc-3v3-sys {
107		/* output of LP8733xx */
108		compatible = "regulator-fixed";
109		regulator-name = "vcc_3v3_sys";
110		regulator-min-microvolt = <3300000>;
111		regulator-max-microvolt = <3300000>;
112		vin-supply = <&vusb_main>;
113		regulator-always-on;
114		regulator-boot-on;
115	};
116
117	vdd_mmc1: fixed-regulator-sd {
118		/* TPS2051BD */
119		compatible = "regulator-fixed";
120		regulator-name = "vdd_mmc1";
121		regulator-min-microvolt = <3300000>;
122		regulator-max-microvolt = <3300000>;
123		regulator-boot-on;
124		enable-active-high;
125		vin-supply = <&vcc_3v3_sys>;
126		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
127	};
128
129	com8_ls_en: regulator-1 {
130		compatible = "regulator-fixed";
131		regulator-name = "com8_ls_en";
132		regulator-min-microvolt = <3300000>;
133		regulator-max-microvolt = <3300000>;
134		regulator-always-on;
135		regulator-boot-on;
136		pinctrl-0 = <&main_com8_ls_en_pins_default>;
137		pinctrl-names = "default";
138		gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>;
139	};
140
141	wlan_en: regulator-2 {
142		/* output of SN74AVC4T245RSVR */
143		compatible = "regulator-fixed";
144		regulator-name = "wlan_en";
145		regulator-min-microvolt = <1800000>;
146		regulator-max-microvolt = <1800000>;
147		enable-active-high;
148		pinctrl-0 = <&main_wlan_en_pins_default>;
149		pinctrl-names = "default";
150		vin-supply = <&com8_ls_en>;
151		gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>;
152	};
153};
154
155&main_pmx0 {
156	main_mmc1_pins_default: main-mmc1-pins-default {
157		pinctrl-single,pins = <
158			AM64X_IOPAD(0x0294, PIN_INPUT, 0) /* (J19) MMC1_CMD */
159			AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */
160			AM64X_IOPAD(0x028c, PIN_INPUT, 0) /* (L20) MMC1_CLK */
161			AM64X_IOPAD(0x0288, PIN_INPUT, 0) /* (K21) MMC1_DAT0 */
162			AM64X_IOPAD(0x0284, PIN_INPUT, 0) /* (L21) MMC1_DAT1 */
163			AM64X_IOPAD(0x0280, PIN_INPUT, 0) /* (K19) MMC1_DAT2 */
164			AM64X_IOPAD(0x027c, PIN_INPUT, 0) /* (K18) MMC1_DAT3 */
165			AM64X_IOPAD(0x0298, PIN_INPUT, 0) /* (D19) MMC1_SDCD */
166		>;
167	};
168
169	main_uart0_pins_default: main-uart0-pins-default {
170		pinctrl-single,pins = <
171			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
172			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
173			AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
174			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
175		>;
176	};
177
178	main_usb0_pins_default: main-usb0-pins-default {
179		pinctrl-single,pins = <
180			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
181		>;
182	};
183
184	main_i2c1_pins_default: main-i2c1-pins-default {
185		pinctrl-single,pins = <
186			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
187			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
188		>;
189	};
190
191	mdio1_pins_default: mdio1-pins-default {
192		pinctrl-single,pins = <
193			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
194			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
195		>;
196	};
197
198	rgmii1_pins_default: rgmii1-pins-default {
199		pinctrl-single,pins = <
200			AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */
201			AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */
202			AM64X_IOPAD(0x0150, PIN_INPUT, 4) /* (Y13) PRG1_PRU1_GPO18.RGMII1_RD2 */
203			AM64X_IOPAD(0x0154, PIN_INPUT, 4) /* (V12) PRG1_PRU1_GPO19.RGMII1_RD3 */
204			AM64X_IOPAD(0x00d8, PIN_INPUT, 4) /* (W13) PRG1_PRU0_GPO8.RGMII1_RXC */
205			AM64X_IOPAD(0x00cc, PIN_INPUT, 4) /* (V13) PRG1_PRU0_GPO5.RGMII1_RX_CTL */
206			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
207			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
208			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
209			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
210			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
211			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
212		>;
213	};
214
215       rgmii2_pins_default: rgmii2-pins-default {
216		pinctrl-single,pins = <
217			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
218			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
219			AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
220			AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
221			AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
222			AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
223			AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
224			AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
225			AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
226			AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
227			AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
228			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
229		>;
230	};
231
232	ospi0_pins_default: ospi0-pins-default {
233		pinctrl-single,pins = <
234			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
235			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
236			AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
237			AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
238			AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
239			AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
240			AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
241			AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
242			AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
243			AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
244			AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
245		>;
246	};
247
248	main_ecap0_pins_default: main-ecap0-pins-default {
249		pinctrl-single,pins = <
250			AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
251		>;
252	};
253	main_wlan_en_pins_default: main-wlan-en-pins-default {
254		pinctrl-single,pins = <
255			AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */
256		>;
257	};
258
259	main_com8_ls_en_pins_default: main-com8-ls-en-pins-default {
260		pinctrl-single,pins = <
261			AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */
262		>;
263	};
264
265	main_wlan_pins_default: main-wlan-pins-default {
266		pinctrl-single,pins = <
267			AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */
268		>;
269	};
270};
271
272&mcu_uart0 {
273	status = "disabled";
274};
275
276&mcu_uart1 {
277	status = "disabled";
278};
279
280&main_uart0 {
281	pinctrl-names = "default";
282	pinctrl-0 = <&main_uart0_pins_default>;
283};
284
285&main_uart1 {
286	/* main_uart1 is reserved for firmware usage */
287	status = "reserved";
288};
289
290&main_uart2 {
291	status = "disabled";
292};
293
294&main_uart3 {
295	status = "disabled";
296};
297
298&main_uart4 {
299	status = "disabled";
300};
301
302&main_uart5 {
303	status = "disabled";
304};
305
306&main_uart6 {
307	status = "disabled";
308};
309
310&mcu_i2c0 {
311	status = "disabled";
312};
313
314&mcu_i2c1 {
315	status = "disabled";
316};
317
318&main_i2c1 {
319	pinctrl-names = "default";
320	pinctrl-0 = <&main_i2c1_pins_default>;
321	clock-frequency = <400000>;
322
323	exp1: gpio@70 {
324		compatible = "nxp,pca9538";
325		reg = <0x70>;
326		gpio-controller;
327		#gpio-cells = <2>;
328		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
329				  "PRU_DETECT", "MMC1_SD_EN",
330				  "VPP_LDO_EN", "RPI_PS_3V3_En",
331				  "RPI_PS_5V0_En", "RPI_HAT_DETECT";
332	};
333};
334
335&main_i2c3 {
336	status = "disabled";
337};
338
339&mcu_spi0 {
340	status = "disabled";
341};
342
343&mcu_spi1 {
344	status = "disabled";
345};
346
347/* mcu_gpio0 is reserved for mcu firmware usage */
348&mcu_gpio0 {
349	status = "reserved";
350};
351
352&sdhci0 {
353	vmmc-supply = <&wlan_en>;
354	bus-width = <4>;
355	non-removable;
356	cap-power-off-card;
357	keep-power-in-suspend;
358	ti,driver-strength-ohm = <50>;
359
360	#address-cells = <1>;
361	#size-cells = <0>;
362	wlcore: wlcore@2 {
363		compatible = "ti,wl1837";
364		reg = <2>;
365		pinctrl-0 = <&main_wlan_pins_default>;
366		pinctrl-names = "default";
367		interrupt-parent = <&main_gpio0>;
368		interrupts = <46 IRQ_TYPE_EDGE_FALLING>;
369	};
370};
371
372&sdhci1 {
373	/* SD/MMC */
374	vmmc-supply = <&vdd_mmc1>;
375	pinctrl-names = "default";
376	bus-width = <4>;
377	pinctrl-0 = <&main_mmc1_pins_default>;
378	ti,driver-strength-ohm = <50>;
379	disable-wp;
380};
381
382&serdes_ln_ctrl {
383	idle-states = <AM64_SERDES0_LANE0_USB>;
384};
385
386&serdes0 {
387	serdes0_usb_link: phy@0 {
388		reg = <0>;
389		cdns,num-lanes = <1>;
390		#phy-cells = <0>;
391		cdns,phy-type = <PHY_TYPE_USB3>;
392		resets = <&serdes_wiz0 1>;
393	};
394};
395
396&usbss0 {
397	ti,vbus-divider;
398};
399
400&usb0 {
401	dr_mode = "host";
402	maximum-speed = "super-speed";
403	pinctrl-names = "default";
404	pinctrl-0 = <&main_usb0_pins_default>;
405	phys = <&serdes0_usb_link>;
406	phy-names = "cdns3,usb3-phy";
407};
408
409&cpsw3g {
410	pinctrl-names = "default";
411	pinctrl-0 = <&mdio1_pins_default
412		     &rgmii1_pins_default
413		     &rgmii2_pins_default>;
414};
415
416&cpsw_port1 {
417	phy-mode = "rgmii-rxid";
418	phy-handle = <&cpsw3g_phy0>;
419};
420
421&cpsw_port2 {
422	phy-mode = "rgmii-rxid";
423	phy-handle = <&cpsw3g_phy1>;
424};
425
426&cpsw3g_mdio {
427	cpsw3g_phy0: ethernet-phy@0 {
428		reg = <0>;
429		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
430		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
431	};
432
433	cpsw3g_phy1: ethernet-phy@1 {
434		reg = <1>;
435		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
436		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
437	};
438};
439
440&tscadc0 {
441	status = "disabled";
442};
443
444&ospi0 {
445	pinctrl-names = "default";
446	pinctrl-0 = <&ospi0_pins_default>;
447
448	flash@0 {
449		compatible = "jedec,spi-nor";
450		reg = <0x0>;
451		spi-tx-bus-width = <8>;
452		spi-rx-bus-width = <8>;
453		spi-max-frequency = <25000000>;
454		cdns,tshsl-ns = <60>;
455		cdns,tsd2d-ns = <60>;
456		cdns,tchsh-ns = <60>;
457		cdns,tslch-ns = <60>;
458		cdns,read-delay = <4>;
459	};
460};
461
462&mailbox0_cluster2 {
463	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
464		ti,mbox-rx = <0 0 2>;
465		ti,mbox-tx = <1 0 2>;
466	};
467
468	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
469		ti,mbox-rx = <2 0 2>;
470		ti,mbox-tx = <3 0 2>;
471	};
472};
473
474&mailbox0_cluster3 {
475	status = "disabled";
476};
477
478&mailbox0_cluster4 {
479	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
480		ti,mbox-rx = <0 0 2>;
481		ti,mbox-tx = <1 0 2>;
482	};
483
484	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
485		ti,mbox-rx = <2 0 2>;
486		ti,mbox-tx = <3 0 2>;
487	};
488};
489
490&mailbox0_cluster5 {
491	status = "disabled";
492};
493
494&mailbox0_cluster6 {
495	mbox_m4_0: mbox-m4-0 {
496		ti,mbox-rx = <0 0 2>;
497		ti,mbox-tx = <1 0 2>;
498	};
499};
500
501&mailbox0_cluster7 {
502	status = "disabled";
503};
504
505&main_r5fss0_core0 {
506	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
507	memory-region = <&main_r5fss0_core0_dma_memory_region>,
508			<&main_r5fss0_core0_memory_region>;
509};
510
511&main_r5fss0_core1 {
512	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
513	memory-region = <&main_r5fss0_core1_dma_memory_region>,
514			<&main_r5fss0_core1_memory_region>;
515};
516
517&main_r5fss1_core0 {
518	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
519	memory-region = <&main_r5fss1_core0_dma_memory_region>,
520			<&main_r5fss1_core0_memory_region>;
521};
522
523&main_r5fss1_core1 {
524	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
525	memory-region = <&main_r5fss1_core1_dma_memory_region>,
526			<&main_r5fss1_core1_memory_region>;
527};
528
529&pcie0_rc {
530	status = "disabled";
531};
532
533&pcie0_ep {
534	status = "disabled";
535};
536
537&ecap0 {
538	/* PWM is available on Pin 1 of header J3 */
539	pinctrl-names = "default";
540	pinctrl-0 = <&main_ecap0_pins_default>;
541};
542
543&ecap1 {
544	status = "disabled";
545};
546
547&ecap2 {
548	status = "disabled";
549};
550
551&epwm0 {
552	status = "disabled";
553};
554
555&epwm1 {
556	status = "disabled";
557};
558
559&epwm2 {
560	status = "disabled";
561};
562
563&epwm3 {
564	status = "disabled";
565};
566
567&epwm4 {
568	/*
569	 * EPWM4_A, EPWM4_B is available on Pin 32 and 33 on J4 (RPi hat)
570	 * But RPi Hat will be used for other use cases, so marking epwm4 as disabled.
571	 */
572	status = "disabled";
573};
574
575&epwm5 {
576	/*
577	 * EPWM5_A, EPWM5_B is available on Pin 29 and 31 on J4 (RPi hat)
578	 * But RPi Hat will be used for other use cases, so marking epwm5 as disabled.
579	 */
580	status = "disabled";
581};
582
583&epwm6 {
584	status = "disabled";
585};
586
587&epwm7 {
588	status = "disabled";
589};
590
591&epwm8 {
592	status = "disabled";
593};
594
595&icssg0_mdio {
596	status = "disabled";
597};
598
599&icssg1_mdio {
600	status = "disabled";
601};
602
603&main_mcan0 {
604	status = "disabled";
605};
606
607&main_mcan1 {
608	status = "disabled";
609};
610