1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/phy/phy.h> 9#include <dt-bindings/leds/common.h> 10#include <dt-bindings/gpio/gpio.h> 11#include <dt-bindings/net/ti-dp83867.h> 12#include "k3-am642.dtsi" 13 14#include "k3-serdes.h" 15 16/ { 17 compatible = "ti,am642-evm", "ti,am642"; 18 model = "Texas Instruments AM642 EVM"; 19 20 chosen { 21 stdout-path = &main_uart0; 22 }; 23 24 aliases { 25 serial0 = &mcu_uart0; 26 serial1 = &main_uart1; 27 serial2 = &main_uart0; 28 serial3 = &main_uart3; 29 i2c0 = &main_i2c0; 30 i2c1 = &main_i2c1; 31 mmc0 = &sdhci0; 32 mmc1 = &sdhci1; 33 ethernet0 = &cpsw_port1; 34 ethernet1 = &cpsw_port2; 35 }; 36 37 memory@80000000 { 38 bootph-all; 39 device_type = "memory"; 40 /* 2G RAM */ 41 reg = <0x00000000 0x80000000 0x00000000 0x80000000>; 42 }; 43 44 reserved-memory { 45 #address-cells = <2>; 46 #size-cells = <2>; 47 ranges; 48 49 secure_ddr: optee@9e800000 { 50 reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ 51 alignment = <0x1000>; 52 no-map; 53 }; 54 55 main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { 56 compatible = "shared-dma-pool"; 57 reg = <0x00 0xa0000000 0x00 0x100000>; 58 no-map; 59 }; 60 61 main_r5fss0_core0_memory_region: r5f-memory@a0100000 { 62 compatible = "shared-dma-pool"; 63 reg = <0x00 0xa0100000 0x00 0xf00000>; 64 no-map; 65 }; 66 67 main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { 68 compatible = "shared-dma-pool"; 69 reg = <0x00 0xa1000000 0x00 0x100000>; 70 no-map; 71 }; 72 73 main_r5fss0_core1_memory_region: r5f-memory@a1100000 { 74 compatible = "shared-dma-pool"; 75 reg = <0x00 0xa1100000 0x00 0xf00000>; 76 no-map; 77 }; 78 79 main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { 80 compatible = "shared-dma-pool"; 81 reg = <0x00 0xa2000000 0x00 0x100000>; 82 no-map; 83 }; 84 85 main_r5fss1_core0_memory_region: r5f-memory@a2100000 { 86 compatible = "shared-dma-pool"; 87 reg = <0x00 0xa2100000 0x00 0xf00000>; 88 no-map; 89 }; 90 91 main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { 92 compatible = "shared-dma-pool"; 93 reg = <0x00 0xa3000000 0x00 0x100000>; 94 no-map; 95 }; 96 97 main_r5fss1_core1_memory_region: r5f-memory@a3100000 { 98 compatible = "shared-dma-pool"; 99 reg = <0x00 0xa3100000 0x00 0xf00000>; 100 no-map; 101 }; 102 103 rtos_ipc_memory_region: ipc-memories@a5000000 { 104 reg = <0x00 0xa5000000 0x00 0x00800000>; 105 alignment = <0x1000>; 106 no-map; 107 }; 108 }; 109 110 evm_12v0: regulator-0 { 111 /* main DC jack */ 112 bootph-all; 113 compatible = "regulator-fixed"; 114 regulator-name = "evm_12v0"; 115 regulator-min-microvolt = <12000000>; 116 regulator-max-microvolt = <12000000>; 117 regulator-always-on; 118 regulator-boot-on; 119 }; 120 121 vsys_5v0: regulator-1 { 122 /* output of LM5140 */ 123 compatible = "regulator-fixed"; 124 regulator-name = "vsys_5v0"; 125 regulator-min-microvolt = <5000000>; 126 regulator-max-microvolt = <5000000>; 127 vin-supply = <&evm_12v0>; 128 regulator-always-on; 129 regulator-boot-on; 130 }; 131 132 vsys_3v3: regulator-2 { 133 /* output of LM5140 */ 134 bootph-all; 135 compatible = "regulator-fixed"; 136 regulator-name = "vsys_3v3"; 137 regulator-min-microvolt = <3300000>; 138 regulator-max-microvolt = <3300000>; 139 vin-supply = <&evm_12v0>; 140 regulator-always-on; 141 regulator-boot-on; 142 }; 143 144 vdd_mmc1: regulator-3 { 145 /* TPS2051BD */ 146 bootph-all; 147 compatible = "regulator-fixed"; 148 regulator-name = "vdd_mmc1"; 149 regulator-min-microvolt = <3300000>; 150 regulator-max-microvolt = <3300000>; 151 regulator-boot-on; 152 enable-active-high; 153 vin-supply = <&vsys_3v3>; 154 gpio = <&exp1 6 GPIO_ACTIVE_HIGH>; 155 }; 156 157 vddb: regulator-4 { 158 compatible = "regulator-fixed"; 159 regulator-name = "vddb_3v3_display"; 160 regulator-min-microvolt = <3300000>; 161 regulator-max-microvolt = <3300000>; 162 vin-supply = <&vsys_3v3>; 163 regulator-always-on; 164 regulator-boot-on; 165 }; 166 167 vtt_supply: regulator-5 { 168 bootph-all; 169 compatible = "regulator-fixed"; 170 regulator-name = "vtt"; 171 pinctrl-names = "default"; 172 pinctrl-0 = <&ddr_vtt_pins_default>; 173 regulator-min-microvolt = <3300000>; 174 regulator-max-microvolt = <3300000>; 175 gpio = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; 176 vin-supply = <&vsys_3v3>; 177 enable-active-high; 178 regulator-always-on; 179 regulator-boot-on; 180 }; 181 182 leds { 183 compatible = "gpio-leds"; 184 185 led-0 { 186 label = "am64-evm:red:heartbeat"; 187 gpios = <&exp1 16 GPIO_ACTIVE_HIGH>; 188 linux,default-trigger = "heartbeat"; 189 function = LED_FUNCTION_HEARTBEAT; 190 default-state = "off"; 191 }; 192 }; 193 194 mdio_mux: mux-controller { 195 compatible = "gpio-mux"; 196 #mux-control-cells = <0>; 197 198 mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>; 199 }; 200 201 mdio-mux-1 { 202 compatible = "mdio-mux-multiplexer"; 203 mux-controls = <&mdio_mux>; 204 mdio-parent-bus = <&cpsw3g_mdio>; 205 #address-cells = <1>; 206 #size-cells = <0>; 207 208 mdio@1 { 209 reg = <0x1>; 210 #address-cells = <1>; 211 #size-cells = <0>; 212 213 cpsw3g_phy3: ethernet-phy@3 { 214 reg = <3>; 215 }; 216 }; 217 }; 218 219 transceiver1: can-phy0 { 220 compatible = "ti,tcan1042"; 221 #phy-cells = <0>; 222 max-bitrate = <5000000>; 223 standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>; 224 }; 225 226 transceiver2: can-phy1 { 227 compatible = "ti,tcan1042"; 228 #phy-cells = <0>; 229 max-bitrate = <5000000>; 230 standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>; 231 }; 232}; 233 234&main_pmx0 { 235 main_mmc1_pins_default: main-mmc1-default-pins { 236 pinctrl-single,pins = < 237 AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ 238 AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ 239 AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ 240 AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ 241 AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ 242 AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ 243 AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ 244 AM64X_IOPAD(0x029c, PIN_INPUT, 0) /* (C20) MMC1_SDWP */ 245 AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */ 246 >; 247 }; 248 249 main_uart1_pins_default: main-uart1-default-pins { 250 pinctrl-single,pins = < 251 AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ 252 AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ 253 AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ 254 AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ 255 >; 256 }; 257 258 main_uart0_pins_default: main-uart0-default-pins { 259 bootph-all; 260 pinctrl-single,pins = < 261 AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ 262 AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ 263 AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ 264 AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ 265 >; 266 }; 267 268 main_spi0_pins_default: main-spi0-default-pins { 269 pinctrl-single,pins = < 270 AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ 271 AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */ 272 AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */ 273 AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */ 274 >; 275 }; 276 277 main_i2c0_pins_default: main-i2c0-default-pins { 278 bootph-all; 279 pinctrl-single,pins = < 280 AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ 281 AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ 282 >; 283 }; 284 285 main_i2c1_pins_default: main-i2c1-default-pins { 286 bootph-all; 287 pinctrl-single,pins = < 288 AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ 289 AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ 290 >; 291 }; 292 293 mdio1_pins_default: mdio1-default-pins { 294 bootph-all; 295 pinctrl-single,pins = < 296 AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ 297 AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ 298 >; 299 }; 300 301 rgmii1_pins_default: rgmii1-default-pins { 302 bootph-all; 303 pinctrl-single,pins = < 304 AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ 305 AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ 306 AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */ 307 AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */ 308 AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ 309 AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ 310 AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ 311 AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ 312 AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ 313 AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ 314 AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ 315 AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ 316 >; 317 }; 318 319 rgmii2_pins_default: rgmii2-default-pins { 320 bootph-all; 321 pinctrl-single,pins = < 322 AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ 323 AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ 324 AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */ 325 AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */ 326 AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */ 327 AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */ 328 AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */ 329 AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */ 330 AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */ 331 AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */ 332 AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */ 333 AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ 334 >; 335 }; 336 337 main_usb0_pins_default: main-usb0-default-pins { 338 bootph-all; 339 pinctrl-single,pins = < 340 AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ 341 >; 342 }; 343 344 ospi0_pins_default: ospi0-default-pins { 345 pinctrl-single,pins = < 346 AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ 347 AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ 348 AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ 349 AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ 350 AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ 351 AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ 352 AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ 353 AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ 354 AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ 355 AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ 356 AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ 357 >; 358 }; 359 360 main_ecap0_pins_default: main-ecap0-default-pins { 361 pinctrl-single,pins = < 362 AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ 363 >; 364 }; 365 366 main_mcan0_pins_default: main-mcan0-default-pins { 367 pinctrl-single,pins = < 368 AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ 369 AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ 370 >; 371 }; 372 373 main_mcan1_pins_default: main-mcan1-default-pins { 374 pinctrl-single,pins = < 375 AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ 376 AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ 377 >; 378 }; 379 380 ddr_vtt_pins_default: ddr-vtt-default-pins { 381 bootph-all; 382 pinctrl-single,pins = < 383 AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ 384 >; 385 }; 386}; 387 388&main_uart0 { 389 bootph-all; 390 status = "okay"; 391 pinctrl-names = "default"; 392 pinctrl-0 = <&main_uart0_pins_default>; 393 current-speed = <115200>; 394}; 395 396/* main_uart1 is reserved for firmware usage */ 397&main_uart1 { 398 status = "reserved"; 399 pinctrl-names = "default"; 400 pinctrl-0 = <&main_uart1_pins_default>; 401}; 402 403&main_i2c0 { 404 bootph-all; 405 status = "okay"; 406 pinctrl-names = "default"; 407 pinctrl-0 = <&main_i2c0_pins_default>; 408 clock-frequency = <400000>; 409 410 gpio@38 { 411 /* TCA9554 */ 412 compatible = "nxp,pca9554"; 413 reg = <0x38>; 414 gpio-controller; 415 #gpio-cells = <2>; 416 gpio-line-names = "HSE_DETECT"; 417 }; 418 419 eeprom@50 { 420 /* AT24CM01 */ 421 compatible = "atmel,24c1024"; 422 reg = <0x50>; 423 }; 424}; 425 426&main_i2c1 { 427 bootph-all; 428 status = "okay"; 429 pinctrl-names = "default"; 430 pinctrl-0 = <&main_i2c1_pins_default>; 431 clock-frequency = <400000>; 432 433 exp1: gpio@22 { 434 bootph-all; 435 compatible = "ti,tca6424"; 436 reg = <0x22>; 437 gpio-controller; 438 #gpio-cells = <2>; 439 gpio-line-names = "GPIO_eMMC_RSTn", "CAN_MUX_SEL", 440 "GPIO_CPSW1_RST", "GPIO_RGMII1_RST", 441 "GPIO_RGMII2_RST", "GPIO_PCIe_RST_OUT", 442 "MMC1_SD_EN", "FSI_FET_SEL", 443 "MCAN0_STB_3V3", "MCAN1_STB_3V3", 444 "CPSW_FET_SEL", "CPSW_FET2_SEL", 445 "PRG1_RGMII2_FET_SEL", "TEST_GPIO2", 446 "GPIO_OLED_RESETn", "VPP_LDO_EN", 447 "TEST_LED1", "TP92", "TP90", "TP88", 448 "TP87", "TP86", "TP89", "TP91"; 449 }; 450 451 /* osd9616p0899-10 */ 452 display@3c { 453 compatible = "solomon,ssd1306fb-i2c"; 454 reg = <0x3c>; 455 reset-gpios = <&exp1 14 GPIO_ACTIVE_LOW>; 456 vbat-supply = <&vddb>; 457 solomon,height = <16>; 458 solomon,width = <96>; 459 solomon,com-seq; 460 solomon,com-invdir; 461 solomon,page-offset = <0>; 462 solomon,prechargep1 = <2>; 463 solomon,prechargep2 = <13>; 464 }; 465}; 466 467&main_gpio0 { 468 bootph-all; 469}; 470 471/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ 472&mcu_gpio0 { 473 status = "reserved"; 474}; 475 476&mcu_gpio_intr { 477 status = "reserved"; 478}; 479 480&main_spi0 { 481 status = "okay"; 482 pinctrl-names = "default"; 483 pinctrl-0 = <&main_spi0_pins_default>; 484 ti,pindir-d0-out-d1-in; 485 eeprom@0 { 486 compatible = "microchip,93lc46b"; 487 reg = <0>; 488 spi-max-frequency = <1000000>; 489 spi-cs-high; 490 data-size = <16>; 491 }; 492}; 493 494/* eMMC */ 495&sdhci0 { 496 status = "okay"; 497 bus-width = <8>; 498 non-removable; 499 ti,driver-strength-ohm = <50>; 500 disable-wp; 501}; 502 503/* SD/MMC */ 504&sdhci1 { 505 bootph-all; 506 status = "okay"; 507 vmmc-supply = <&vdd_mmc1>; 508 pinctrl-names = "default"; 509 bus-width = <4>; 510 pinctrl-0 = <&main_mmc1_pins_default>; 511 ti,driver-strength-ohm = <50>; 512 disable-wp; 513}; 514 515&usbss0 { 516 bootph-all; 517 ti,vbus-divider; 518 ti,usb2-only; 519}; 520 521&usb0 { 522 bootph-all; 523 dr_mode = "otg"; 524 maximum-speed = "high-speed"; 525 pinctrl-names = "default"; 526 pinctrl-0 = <&main_usb0_pins_default>; 527}; 528 529&cpsw3g { 530 bootph-all; 531 pinctrl-names = "default"; 532 pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; 533}; 534 535&cpsw_port1 { 536 bootph-all; 537 phy-mode = "rgmii-rxid"; 538 phy-handle = <&cpsw3g_phy0>; 539}; 540 541&cpsw_port2 { 542 phy-mode = "rgmii-rxid"; 543 phy-handle = <&cpsw3g_phy3>; 544}; 545 546&cpsw3g_mdio { 547 bootph-all; 548 status = "okay"; 549 pinctrl-names = "default"; 550 pinctrl-0 = <&mdio1_pins_default>; 551 552 cpsw3g_phy0: ethernet-phy@0 { 553 bootph-all; 554 reg = <0>; 555 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 556 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 557 }; 558}; 559 560&tscadc0 { 561 /* ADC is reserved for R5 usage */ 562 status = "reserved"; 563}; 564 565&ospi0 { 566 status = "okay"; 567 pinctrl-names = "default"; 568 pinctrl-0 = <&ospi0_pins_default>; 569 570 flash@0 { 571 compatible = "jedec,spi-nor"; 572 reg = <0x0>; 573 spi-tx-bus-width = <8>; 574 spi-rx-bus-width = <8>; 575 spi-max-frequency = <25000000>; 576 cdns,tshsl-ns = <60>; 577 cdns,tsd2d-ns = <60>; 578 cdns,tchsh-ns = <60>; 579 cdns,tslch-ns = <60>; 580 cdns,read-delay = <4>; 581 582 partitions { 583 compatible = "fixed-partitions"; 584 #address-cells = <1>; 585 #size-cells = <1>; 586 587 partition@0 { 588 label = "ospi.tiboot3"; 589 reg = <0x0 0x100000>; 590 }; 591 592 partition@100000 { 593 label = "ospi.tispl"; 594 reg = <0x100000 0x200000>; 595 }; 596 597 partition@300000 { 598 label = "ospi.u-boot"; 599 reg = <0x300000 0x400000>; 600 }; 601 602 partition@700000 { 603 label = "ospi.env"; 604 reg = <0x700000 0x40000>; 605 }; 606 607 partition@740000 { 608 label = "ospi.env.backup"; 609 reg = <0x740000 0x40000>; 610 }; 611 612 partition@800000 { 613 label = "ospi.rootfs"; 614 reg = <0x800000 0x37c0000>; 615 }; 616 617 partition@3fc0000 { 618 label = "ospi.phypattern"; 619 reg = <0x3fc0000 0x40000>; 620 }; 621 }; 622 }; 623}; 624 625&mailbox0_cluster2 { 626 status = "okay"; 627 628 mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { 629 ti,mbox-rx = <0 0 2>; 630 ti,mbox-tx = <1 0 2>; 631 }; 632 633 mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { 634 ti,mbox-rx = <2 0 2>; 635 ti,mbox-tx = <3 0 2>; 636 }; 637}; 638 639&mailbox0_cluster4 { 640 status = "okay"; 641 642 mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { 643 ti,mbox-rx = <0 0 2>; 644 ti,mbox-tx = <1 0 2>; 645 }; 646 647 mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { 648 ti,mbox-rx = <2 0 2>; 649 ti,mbox-tx = <3 0 2>; 650 }; 651}; 652 653&mailbox0_cluster6 { 654 status = "okay"; 655 656 mbox_m4_0: mbox-m4-0 { 657 ti,mbox-rx = <0 0 2>; 658 ti,mbox-tx = <1 0 2>; 659 }; 660}; 661 662&main_r5fss0_core0 { 663 mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; 664 memory-region = <&main_r5fss0_core0_dma_memory_region>, 665 <&main_r5fss0_core0_memory_region>; 666}; 667 668&main_r5fss0_core1 { 669 mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; 670 memory-region = <&main_r5fss0_core1_dma_memory_region>, 671 <&main_r5fss0_core1_memory_region>; 672}; 673 674&main_r5fss1_core0 { 675 mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; 676 memory-region = <&main_r5fss1_core0_dma_memory_region>, 677 <&main_r5fss1_core0_memory_region>; 678}; 679 680&main_r5fss1_core1 { 681 mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; 682 memory-region = <&main_r5fss1_core1_dma_memory_region>, 683 <&main_r5fss1_core1_memory_region>; 684}; 685 686&serdes_ln_ctrl { 687 idle-states = <AM64_SERDES0_LANE0_PCIE0>; 688}; 689 690&serdes0 { 691 serdes0_pcie_link: phy@0 { 692 reg = <0>; 693 cdns,num-lanes = <1>; 694 #phy-cells = <0>; 695 cdns,phy-type = <PHY_TYPE_PCIE>; 696 resets = <&serdes_wiz0 1>; 697 }; 698}; 699 700&pcie0_rc { 701 status = "okay"; 702 reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>; 703 phys = <&serdes0_pcie_link>; 704 phy-names = "pcie-phy"; 705 num-lanes = <1>; 706}; 707 708&pcie0_ep { 709 phys = <&serdes0_pcie_link>; 710 phy-names = "pcie-phy"; 711 num-lanes = <1>; 712}; 713 714&ecap0 { 715 status = "okay"; 716 /* PWM is available on Pin 1 of header J12 */ 717 pinctrl-names = "default"; 718 pinctrl-0 = <&main_ecap0_pins_default>; 719}; 720 721&main_mcan0 { 722 status = "okay"; 723 pinctrl-names = "default"; 724 pinctrl-0 = <&main_mcan0_pins_default>; 725 phys = <&transceiver1>; 726}; 727 728&main_mcan1 { 729 status = "okay"; 730 pinctrl-names = "default"; 731 pinctrl-0 = <&main_mcan1_pins_default>; 732 phys = <&transceiver2>; 733}; 734