xref: /freebsd/sys/contrib/device-tree/src/arm64/ti/k3-am62p-mcu.dtsi (revision 8c2f6c3be0125142d3c1782e4b0ee0634c584b9e)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree file for the AM62P MCU domain peripherals
4 * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
5 */
6
7&cbass_mcu {
8	mcu_pmx0: pinctrl@4084000 {
9		compatible = "pinctrl-single";
10		reg = <0x00 0x04084000 0x00 0x88>;
11		#pinctrl-cells = <1>;
12		pinctrl-single,register-width = <32>;
13		pinctrl-single,function-mask = <0xffffffff>;
14		bootph-all;
15	};
16
17	mcu_esm: esm@4100000 {
18		compatible = "ti,j721e-esm";
19		reg = <0x00 0x4100000 0x00 0x1000>;
20		ti,esm-pins = <0>, <1>, <2>, <85>;
21		status = "reserved";
22		bootph-pre-ram;
23	};
24
25	/*
26	 * The MCU domain timer interrupts are routed only to the ESM module,
27	 * and not currently available for Linux. The MCU domain timers are
28	 * of limited use without interrupts, and likely reserved by the ESM.
29	 */
30	mcu_timer0: timer@4800000 {
31		compatible = "ti,am654-timer";
32		reg = <0x00 0x4800000 0x00 0x400>;
33		clocks = <&k3_clks 35 2>;
34		clock-names = "fck";
35		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
36		ti,timer-pwm;
37		status = "reserved";
38	};
39
40	mcu_timer1: timer@4810000 {
41		compatible = "ti,am654-timer";
42		reg = <0x00 0x4810000 0x00 0x400>;
43		clocks = <&k3_clks 48 2>;
44		clock-names = "fck";
45		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
46		ti,timer-pwm;
47		status = "reserved";
48	};
49
50	mcu_timer2: timer@4820000 {
51		compatible = "ti,am654-timer";
52		reg = <0x00 0x4820000 0x00 0x400>;
53		clocks = <&k3_clks 49 2>;
54		clock-names = "fck";
55		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
56		ti,timer-pwm;
57		status = "reserved";
58	};
59
60	mcu_timer3: timer@4830000 {
61		compatible = "ti,am654-timer";
62		reg = <0x00 0x4830000 0x00 0x400>;
63		clocks = <&k3_clks 50 2>;
64		clock-names = "fck";
65		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
66		ti,timer-pwm;
67		status = "reserved";
68	};
69
70	mcu_uart0: serial@4a00000 {
71		compatible = "ti,am64-uart", "ti,am654-uart";
72		reg = <0x00 0x04a00000 0x00 0x100>;
73		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
74		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
75		clocks = <&k3_clks 149 0>;
76		clock-names = "fclk";
77		status = "disabled";
78	};
79
80	mcu_i2c0: i2c@4900000 {
81		compatible = "ti,am64-i2c", "ti,omap4-i2c";
82		reg = <0x00 0x04900000 0x00 0x100>;
83		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
84		#address-cells = <1>;
85		#size-cells = <0>;
86		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
87		clocks = <&k3_clks 106 2>;
88		clock-names = "fck";
89		status = "disabled";
90	};
91
92	mcu_spi0: spi@4b00000 {
93		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
94		reg = <0x00 0x04b00000 0x00 0x400>;
95		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
96		#address-cells = <1>;
97		#size-cells = <0>;
98		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
99		clocks = <&k3_clks 147 0>;
100		status = "disabled";
101	};
102
103	mcu_spi1: spi@4b10000 {
104		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
105		reg = <0x00 0x04b10000 0x00 0x400>;
106		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
107		#address-cells = <1>;
108		#size-cells = <0>;
109		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
110		clocks = <&k3_clks 148 0>;
111		status = "disabled";
112	};
113
114	mcu_gpio_intr: interrupt-controller@4210000 {
115		compatible = "ti,sci-intr";
116		reg = <0x00 0x04210000 0x00 0x200>;
117		ti,intr-trigger-type = <1>;
118		interrupt-controller;
119		interrupt-parent = <&gic500>;
120		#interrupt-cells = <1>;
121		ti,sci = <&dmsc>;
122		ti,sci-dev-id = <5>;
123		ti,interrupt-ranges = <0 104 4>;
124	};
125
126	mcu_gpio0: gpio@4201000 {
127		compatible = "ti,am64-gpio", "ti,keystone-gpio";
128		reg = <0x00 0x4201000 0x00 0x100>;
129		gpio-controller;
130		#gpio-cells = <2>;
131		interrupt-parent = <&mcu_gpio_intr>;
132		interrupts = <30>, <31>;
133		interrupt-controller;
134		#interrupt-cells = <2>;
135		ti,ngpio = <24>;
136		ti,davinci-gpio-unbanked = <0>;
137		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
138		clocks = <&k3_clks 79 0>;
139		clock-names = "gpio";
140	};
141
142	mcu_rti0: watchdog@4880000 {
143		compatible = "ti,j7-rti-wdt";
144		reg = <0x00 0x04880000 0x00 0x100>;
145		clocks = <&k3_clks 131 0>;
146		power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
147		assigned-clocks = <&k3_clks 131 0>;
148		assigned-clock-parents = <&k3_clks 131 2>;
149		/* Tightly coupled to M4F */
150		status = "reserved";
151	};
152
153	mcu_mcan0: can@4e08000 {
154		compatible = "bosch,m_can";
155		reg = <0x00 0x4e08000 0x00 0x200>,
156		      <0x00 0x4e00000 0x00 0x8000>;
157		reg-names = "m_can", "message_ram";
158		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
159		clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
160		clock-names = "hclk", "cclk";
161		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
162		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
163			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
164		interrupt-names = "int0", "int1";
165		status = "disabled";
166	};
167
168	mcu_mcan1: can@4e18000 {
169		compatible = "bosch,m_can";
170		reg = <0x00 0x4e18000 0x00 0x200>,
171		      <0x00 0x4e10000 0x00 0x8000>;
172		reg-names = "m_can", "message_ram";
173		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
174		clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
175		clock-names = "hclk", "cclk";
176		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
177		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
178			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
179		interrupt-names = "int0", "int1";
180		status = "disabled";
181	};
182
183	mcu_r5fss0: r5fss@79000000 {
184		compatible = "ti,am62-r5fss";
185		#address-cells = <1>;
186		#size-cells = <1>;
187		ranges = <0x79000000 0x00 0x79000000 0x8000>,
188			 <0x79020000 0x00 0x79020000 0x8000>;
189		power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
190		mcu_r5fss0_core0: r5f@79000000 {
191			compatible = "ti,am62-r5f";
192			reg = <0x79000000 0x00008000>,
193			      <0x79020000 0x00008000>;
194			reg-names = "atcm", "btcm";
195			ti,sci = <&dmsc>;
196			ti,sci-dev-id = <9>;
197			ti,sci-proc-ids = <0x03 0xff>;
198			resets = <&k3_reset 9 1>;
199			firmware-name = "am62p-mcu-r5f0_0-fw";
200			ti,atcm-enable = <0>;
201			ti,btcm-enable = <1>;
202			ti,loczrama = <0>;
203		};
204	};
205};
206