xref: /freebsd/sys/contrib/device-tree/src/arm64/ti/k3-am62p-j722s-common-mcu.dtsi (revision b2d2a78ad80ec68d4a17f5aef97d21686cb1e29b)

// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
 * Device Tree file for the MCU domain peripherals shared by AM62P and J722S
 *
 * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
 */

&cbass_mcu {
	mcu_pmx0: pinctrl@4084000 {
		compatible = "pinctrl-single";
		reg = <0x00 0x04084000 0x00 0x88>;
		#pinctrl-cells = <1>;
		pinctrl-single,register-width = <32>;
		pinctrl-single,function-mask = <0xffffffff>;
		pinctrl-single,gpio-range =
			<&mcu_pmx_range 0 21 PIN_GPIO_RANGE_IOPAD>,
			<&mcu_pmx_range 23 1 PIN_GPIO_RANGE_IOPAD>,
			<&mcu_pmx_range 32 2 PIN_GPIO_RANGE_IOPAD>;
		bootph-all;

		mcu_pmx_range: gpio-range {
			#pinctrl-single,gpio-range-cells = <3>;
		};
	};

	mcu_esm: esm@4100000 {
		compatible = "ti,j721e-esm";
		reg = <0x00 0x4100000 0x00 0x1000>;
		bootph-pre-ram;
		/* Interrupt sources: esm0_cfg, esm0_hi, esm0_low, mrti0, wrti0 */
		ti,esm-pins = <0>, <1>, <2>, <85>, <86>;
	};

	/*
	 * The MCU domain timer interrupts are routed only to the ESM module,
	 * and not currently available for Linux. The MCU domain timers are
	 * of limited use without interrupts, and likely reserved by the ESM.
	 */
	mcu_timer0: timer@4800000 {
		compatible = "ti,am654-timer";
		reg = <0x00 0x4800000 0x00 0x400>;
		clocks = <&k3_clks 35 2>;
		clock-names = "fck";
		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
		ti,timer-pwm;
		status = "reserved";
	};

	mcu_timer1: timer@4810000 {
		compatible = "ti,am654-timer";
		reg = <0x00 0x4810000 0x00 0x400>;
		clocks = <&k3_clks 48 2>;
		clock-names = "fck";
		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
		ti,timer-pwm;
		status = "reserved";
	};

	mcu_timer2: timer@4820000 {
		compatible = "ti,am654-timer";
		reg = <0x00 0x4820000 0x00 0x400>;
		clocks = <&k3_clks 49 2>;
		clock-names = "fck";
		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
		ti,timer-pwm;
		status = "reserved";
	};

	mcu_timer3: timer@4830000 {
		compatible = "ti,am654-timer";
		reg = <0x00 0x4830000 0x00 0x400>;
		clocks = <&k3_clks 50 2>;
		clock-names = "fck";
		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
		ti,timer-pwm;
		status = "reserved";
	};

	mcu_uart0: serial@4a00000 {
		compatible = "ti,am64-uart", "ti,am654-uart";
		reg = <0x00 0x04a00000 0x00 0x100>;
		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
		clocks = <&k3_clks 149 0>;
		clock-names = "fclk";
		status = "disabled";
	};

	mcu_i2c0: i2c@4900000 {
		compatible = "ti,am64-i2c", "ti,omap4-i2c";
		reg = <0x00 0x04900000 0x00 0x100>;
		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
		clocks = <&k3_clks 106 2>;
		clock-names = "fck";
		status = "disabled";
	};

	mcu_spi0: spi@4b00000 {
		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
		reg = <0x00 0x04b00000 0x00 0x400>;
		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
		clocks = <&k3_clks 147 0>;
		status = "disabled";
	};

	mcu_spi1: spi@4b10000 {
		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
		reg = <0x00 0x04b10000 0x00 0x400>;
		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
		#address-cells = <1>;
		#size-cells = <0>;
		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
		clocks = <&k3_clks 148 0>;
		status = "disabled";
	};

	mcu_gpio_intr: interrupt-controller@4210000 {
		compatible = "ti,sci-intr";
		reg = <0x00 0x04210000 0x00 0x200>;
		ti,intr-trigger-type = <1>;
		interrupt-controller;
		interrupt-parent = <&gic500>;
		#interrupt-cells = <1>;
		ti,sci = <&dmsc>;
		ti,sci-dev-id = <5>;
		ti,interrupt-ranges = <0 104 4>;
	};

	mcu_gpio0: gpio@4201000 {
		compatible = "ti,am64-gpio", "ti,keystone-gpio";
		reg = <0x00 0x4201000 0x00 0x100>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-parent = <&mcu_gpio_intr>;
		interrupts = <30>, <31>;
		interrupt-controller;
		#interrupt-cells = <2>;
		ti,ngpio = <24>;
		ti,davinci-gpio-unbanked = <0>;
		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
		clocks = <&k3_clks 79 0>;
		clock-names = "gpio";
		gpio-ranges = <&mcu_pmx0 0 0 21>, <&mcu_pmx0 21 23 1>,
			      <&mcu_pmx0 22 32 2>;
	};

	mcu_rti0: watchdog@4880000 {
		compatible = "ti,j7-rti-wdt";
		reg = <0x00 0x04880000 0x00 0x100>;
		clocks = <&k3_clks 131 0>;
		power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
		assigned-clocks = <&k3_clks 131 0>;
		assigned-clock-parents = <&k3_clks 131 2>;
		/* Tightly coupled to M4F */
		status = "reserved";
	};

	mcu_mcan0: can@4e08000 {
		compatible = "bosch,m_can";
		reg = <0x00 0x4e08000 0x00 0x200>,
		      <0x00 0x4e00000 0x00 0x8000>;
		reg-names = "m_can", "message_ram";
		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
		clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
		clock-names = "hclk", "cclk";
		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "int0", "int1";
		status = "disabled";
	};

	mcu_mcan1: can@4e18000 {
		compatible = "bosch,m_can";
		reg = <0x00 0x4e18000 0x00 0x200>,
		      <0x00 0x4e10000 0x00 0x8000>;
		reg-names = "m_can", "message_ram";
		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
		clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
		clock-names = "hclk", "cclk";
		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "int0", "int1";
		status = "disabled";
	};

	mcu_r5fss0: r5fss@79000000 {
		compatible = "ti,am62-r5fss";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x79000000 0x00 0x79000000 0x8000>,
			 <0x79020000 0x00 0x79020000 0x8000>;
		power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
		status = "disabled";

		mcu_r5fss0_core0: r5f@79000000 {
			compatible = "ti,am62-r5f";
			reg = <0x79000000 0x00008000>,
			      <0x79020000 0x00008000>;
			reg-names = "atcm", "btcm";
			ti,sci = <&dmsc>;
			ti,sci-dev-id = <9>;
			ti,sci-proc-ids = <0x03 0xff>;
			resets = <&k3_reset 9 1>;
			firmware-name = "am62p-mcu-r5f0_0-fw";
			ti,atcm-enable = <0>;
			ti,btcm-enable = <1>;
			ti,loczrama = <0>;
		};
	};
};